Exposición a temperaturas extremas y su efecto en la gestación en un departamento de Colombia / Exposure to extreme temperatures and its effect on pregnancy in a department of Colombia

Introducción: Diversas investigaciones han establecido la relación entre temperatura y duración del embarazo, la exposición a temperaturas altas durante el embarazo plantea interrogantes en especial el papel que esta juega frente a los partos prematuros y partos de bajo peso, es indispensable determinar si las temperaturas altas o bajas tienen un comportamiento protector o de riesgo sobre el feto durante la gestación en regiones tropicales. Objetivo: describir la relación entre la exposición a temperaturas altas y bajas durante el embarazo y su efecto en la edad gestacional y peso al momento del parto en los recién nacidos del departamento del Guaviare-Colombia. Metodología: Estudio tipo observacional, analítico, retrospectivo de corte transversal que busco determinar la relación entre exposición a temperaturas altas y bajas durante el embarazo y su efecto en la edad gestacional y peso al momento del parto en los recién nacidos, el universo estuvo conformado por 10.137 nacidos vivos, de los cuales 9.932 cumplieron los criterios de inclusión. Se determinó Odds Ratio para estimar la asociación entre las variables. Resultados: Dentro de la semana de retraso 3 el estar expuesto a temperaturas máximas percentil 90 es un factor protector para la ganancia ponderal de peso OR < 1, la exposición a temperaturas mínimas percentil 10 se asoció como factor protector para el parto prematuro en la semana de retraso 1 y 2 OR < 1.Conclusión: A pesar del beneficio de las altas y bajas temperaturas durante el embarazo en la ganancia ponderal de peso y disminución del parto prematuro, es recomendable prevenir la exposición a temperaturas extremas durante el periodo de gestación[AU]

Introduction: Various investigations have established the relationship between temperature and duration of pregnancy. Exposure to high temperatures during pregnancy raises questions, especially the role it plays in premature births and low-weight births. It is essential to determine whether high temperatures or low have a protective or risky behavior on the fetus during pregnancy in tropical regions.Objective: to describe the relationship between exposure to high and low temperatures during pregnancy and its effect on gestational age and weight at the time of delivery in newborns in the department of Guaviare-Colombia.Methodology:Observational, analytical, retrospective cross-sectional study that sought to determine the relationship between exposure to high and low temperatures during pregnancy and its effect on gestational age and weight at the time of delivery in newborns. The universe was made up of 10,137 births. alive, of which 9,932 met the inclusion criteria. Odds Ratio was determined to estimate the association between the variables.Results:Within the 3rd week of delay, being exposed to maximum temperatures at the 90th percentile is a protective factor for weight gain OR < 1, exposure to minimum temperatures at the 10th percentile was associated as a protective factor for premature birth in the week. of delay 1 and 2 OR < 1. Conclusion: Despite the benefit of high and low temperatures during pregnancy in weight gain and reduction in premature birth, it is advisable to prevent exposure to extreme temperatures during the gestation period[AU]

Introdução: Várias investigações estabeleceram a relação entre temperatura e duração da gravidez. A exposição a altas temperaturas durante a gravidez levanta questões, especialmente o papel que desempenha nos partos prematuros e nos nascimentos de baixo peso. É essencial determinar se as temperaturas altas ou baixas têm um comportamento protetor ou de risco para o feto durante a gravidez em regiões tropicais. Objetivo:descrever a relação entre a exposição a altas e baixas temperaturas durante a gravidez e seu efeito na idade gestacional e no peso no momento do parto em recém-nascidos no departamento de Guaviare-Colômbia. Metodologia: Estudo observacional, analítico, retrospectivo e transversal que buscou determinar a relação entre a exposição a altas e baixas temperaturas durante a gravidez e seu efeito na idade gestacional e no peso no momento do parto em recém-nascidos. O universo foi composto por 10.137 nascimentos. vivos, dos quais 9.932 preencheram os critérios de inclusão. O Odds Ratio foi determinado para estimar a associação entre as variáveis. Resultados:Na 3ª semana de atraso, a exposição a temperaturas máximas no percentil 90 é fator de proteção para ganho de peso OR < 1, a exposição a temperaturas mínimas no percentil 10 foi associada como fator de proteção para parto prematuro na semana. de atraso 1 e 2 OR < 1.Conclusão:Apesar do benefício das altas e baixas temperaturas durante a gravidez no ganho de peso e redução do parto prematuro, é aconselhável evitar a exposição a temperaturas extremas durante o período de gestação[AU]

Spatial datasets of 30-year (1991-2020) average monthly total precipitation and minimum/maximum temperature for Canada and the United States.

Thin plate smoothing spline models, covering Canada and the continental United States, were developed using ANUSPLIN for 30-year (1991-2020) monthly mean maximum and minimum temperature and precipitation. These models employed monthly weather station values from the North American dataset published by National Oceanic and Atmospheric Administration's (NOAA's) National Centers for Environmental Information (NCEI). Maximum temperature mean absolute errors (MAEs) ranged between 0.54 °C and 0.64 °C (approaching measurement error), while minimum temperature MAEs were slightly higher, varying from 0.87 °C to 1.0 °C. On average, thirty-year precipitation estimates were accurate to within approximately 10 % of total precipitation levels, ranging from 9.0 % in the summer to 12.2 % in the winter. Error rates were higher in Canada compared to estimates in the United States, consistent with a less dense station network in Canada relative to the United States. Precipitation estimates in Canada exhibited MAEs representing 14.7 % of mean total precipitation compared to 9.7 % in the United States. The datasets exhibited minimal bias overall; 0.004 °C for maximum temperature, 0.01 °C for minimum temperature, and 0.5 % for precipitation. Winter months showed a greater dry bias (0.8 % of total winter precipitation) compared to other seasons (-0.4 % of precipitation). These 30-year gridded datasets are available at ∼2 km resolution.

Comprehensive analysis and treatment of intraoral thyroglossal duct cysts with intraoperative techniques: a 7-case series review in a tertiary care center.

OBJECTIVE: Intraoral thyroglossal duct cyst is a relatively rare clinical disease. This article reviews the diagnosis and treatment process of 7 patients and explores the clinical characteristics of diagnosis and treatment of intraoral thyroglossal duct cyst in combination with past literature reports. METHOD: A retrospective analysis was conducted on 7 cases of intraoral thyroglossal duct cyst admitted to the Otolaryngology ward of Dalian Municipal Central Hospital from January 2017 to January 2024. The cases were recorded in terms of gender, age, symptoms, physical signs, radiological examinations, surgical methods, and postoperative complications. All cases were followed up, and the latest follow-up results were recorded. RESULTS: Among the 7 cases, 6 patients underwent laryngoscopic and radiological examinations before surgery, and 1 child was found to have a cyst during surgery. All cases were diagnosed with intraoral thyroglossal duct cyst and treated with plasma radiofrequency surgery. None of the patients had postoperative complications, and no recurrence was found in the six-month follow-up after discharge. CONCLUSION: Intraoral thyroglossal duct cyst is rare in clinical practice. It is important to pay attention to its differential diagnosis clinically, and careful review of images is required before surgery. Cryoablation with low-temperature plasma radiofrequency is not only minimally invasive and has a quick recovery but also has few complications and a low recurrence rate. It is a safe and effective treatment method that is worthy of clinical promotion. LEVEL OF EVIDENCE: Level 3.

A temperature compensated fiber probe for highly sensitive detection in virus gene biosensing.

This research presents an innovative reflective fiber optic probe structure, mutinously designed to detect H7N9 avian influenza virus gene precisely. This innovative structure skillfully combines multimode fiber (MMF) with a thin-diameter seven-core photonic crystal fiber (SCF-PCF), forming a semi-open Fabry-Pérot (FPI) cavity. This structure has demonstrated exceptional sensitivity in light intensity-refractive index (RI) response through rigorous theoretical and experimental validation. The development of a quasi-distributed parallel sensor array, which provides temperature compensation during measurements, has achieved a remarkable RI response sensitivity of up to 532.7 dB/RIU. The probe-type fiber optic sensitive unit, expertly functionalized with streptavidin, offers high specificity in detecting H7N9 avian influenza virus gene, with an impressively low detection limit of 10-2 pM. The development of this biosensor marks a significant development in biological detection, offering a practical engineering solution for achieving high sensitivity and specificity in light-intensity-modulated biosensing. Its potential for wide-ranging applications in various fields is now well-established.

Mechanisms of heating-electrokinetic co-driven perfluorooctanoic acid (PFOA) adsorption on zeolite.

Slow release of emerging contaminants limits their accessibility from soil to pore water, constraining the treatment efficiency of physio-chemical treatment sites. DC fields mobilize organic contaminants and influence their interactions with geo-matrices such as zeolites. Poor knowledge, however, exists on the joint application of heating and electrokinetic approaches on perfluorooctanoic acid (PFOA) transport in porous media. Here, we investigated electrokinetic PFOA transport in zeolite-filled percolation columns at varying temperatures. Variations of pseudo-second-order kinetic constants (kPSO) were correlated to the liquid viscosity variations (η) and elctroosmotic flow velocities (vEOF). Applying DC fields and elevated temperature significantly (>37%) decreased PFOA sorption to zeolite. A good correlation between η, vEOF, and kPSO was found and used to develop an approach interlinking the three parameters to predict the joint effects of DC fields and temperature on PFOA sorption kinetics. These findings may give rise to future applications for better tailoring PFOA transport in environmental biotechnology.

Differential Efficacy of Storage Temperature and Postharvest Treatment on Shelf Life and Quality of Avocado Fruit (Persea americana Mill.).

Avocado fruit is a rich source of phytonutrients such as vitamins, minerals, carotenoids, carbohydrates, polyphenols and unsaturated fatty acids. However, due to its climacteric nature, fruits are highly susceptible to storage temperature, resulting in poor shelf life and reduced quality. In the present study avocado fruits (Accession CHES-HA-I/I) were stored at different low temperatures (5, 9 and 12 °C with 90-95% relative humidity, RH) to identify optimum low temperature for cold storage. In a further experiment, avocado fruits were treated with 1-methylcyclopropene (1-MCP, 500 ppb) and chitosan (0.5%) to extend the shelf life with better fruit quality. The results showed that storage temperatures had significant effect on physiological, biochemical and antioxidant activities of fruits. Lower physiological loss in weight (PLW), reduced respiration and ethylene production, and higher carbohydrates, protein and fat content were recorded in fruits stored at 9 °C as compared to 12 °C. Similarly, maximum antioxidant properties in terms of free radical scavenging activity (FRSA) and ferric reducing ability of plasma (FRAP) was found in avocado fruits stored at 9 °C. It was also noticed that chilling injury was developed in fruits stored under 5 °C. In addition, exogenous application of 1-MCP significantly reduced respiration and ethylene production rate at 9 °C and extended the shelf life up to 42 days with better fruit quality and more antioxidant activities. However, chitosan treated and control fruits had shelf life up to 28 and 21 days respectively, with minimum nutritional content. From this study it is concluded that a storage temperature of 9 °C and 1-MCP treatment significantly enhanced the shelf life of avocado fruits with better fruit quality as compared to other storage temperatures (5 and 12 °C) and postharvest treatment (chitosan).

A trawl collected dataset of Johnius (Actinopterygii, Sciaenidae) species in central-western Taiwanese waters.

Background: Sciaenidae is one of the most important coastal fisheries in Taiwan, both in production and economic value. It is also significant as the main targetted diet of Chinese white dolphins, Sousachinensis, especially for the genus Johnius, such as J.taiwanensis, J.belangerii and J.distinctus, which is primarily found in central-western Taiwan coastal waters. Despite an abundance of Johnius species occurrences reported in the Global Biodiversity Information Facility (GBIF) and the Taiwan Biodiversity Information Facility (TaiBIF) data portals (Mozambique, Australia, Taiwan, Korea, India, Indonesia, South Africa, Pakistan, Vietnam and China), there are no specific datasets that properly document the regional distribution of this genus, especially in Taiwanese waters. Thus, this paper describes a dataset of genus Johnius occurrences in waters on the central-western coast of Taiwan. The data collection for the present study was conducted from 2009 until 2020 and comprised 62 sampling events and 133 occurrence records. All fish specimens were collected by trawling in Miaoli, Changhwa and Yunlin Counties, Taiwan and brought back to the lab for identification, individual number count and body weight measurement. These processing data have been integrated and established in the Taiwan Fish Database and published in GBIF. This dataset contains six Johnius species and 2,566 specimens, making it comprehensive Johnius fish fauna and spatial distributional data on the coastal habitat in central-western Taiwanese waters. New information: This dataset contains 133 occurrence records of Johnius species (Sciaenidae) with 2,566 specimens, making it the most extensive public dataset of Johnius distribution records in Taiwan. The publication of this dataset through the TaiBIF and GBIF dataset platforms demonstrated that the number of Johnius spatial and temporal records in Taiwan waters is influenced by the topographical structure of the Changyun Rise (CYR) in combination with the cold current of the China Coastal currents and bound with the warm currents of the Kuroshio and the South China Sea on the central-western coast of Taiwan. The data serve as the foundation for understanding the biogeography and Johnius species ecology in Taiwan's coastal waters, which present a 2°C water temperature difference split at the CYR.

Origins of Temperature-Dependent Anomeric Selectivity in Glycosylations with an L-Idose Thioglycoside.

L-Idose thioglycosides are useful glycosyl donors for the construction of glycosaminoglycan oligosaccharides. When activated with NIS and catalytic TMSOTf in the presence of methanol, the stereoselectivity of O-glycosylation displays an intriguing dependence on the reaction temperature, with an increased preference for formation of the α-glycoside at higher temperatures. Using a combination of vt-NMR spectroscopy and DFT calculations, we show how a simple mechanistic model, based on competing reactions of the iodinated thioglycoside, can explain the main features of the temperature dependence. In this model, the increased selectivity at high temperature is attributed to differences among the entropy and energy terms of the competing reaction pathways. Neighbouring-group participation (giving an intermediate acyloxonium ion) plays an increasingly dominant role as temperature is raised. The general features of this kinetic regime may also apply more broadly to other glycosylations that likewise favour α-glycoside formation at high temperature.

Effects of heating on bioceramic sealers: a scoping review of chemo-physical properties and clinical implications.

This scoping review aims to summarize current research to assess the impact of heating on the chemo-physical properties of bioceramic sealers. Following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) Extension for Scoping Reviews guidelines, a comprehensive literature search was conducted in April 2024 across PubMed and Scopus databases. Inclusion criteria referred to all study types evaluating the effect of heating temperature on bioceramic sealers' properties, with no language or time restrictions applied. Studies were independently screened by two reviewers, and relevant data were extracted and synthesized qualitatively. Out of 91 initially identified studies, 19 met the eligibility criteria for inclusion in the qualitative synthesis. The selected studies ranged from 2014 to 2024 and comprised laboratory-based investigations. Various bioceramic sealers, including EndoSequence BC Sealer, BioRoot RCS, and TotalFill BC, were analyzed across different heating techniques. The findings revealed divergent responses of bioceramic sealers to heat, with some demonstrating stability while others exhibited alterations in properties such as flow, setting time, and chemical composition. The impact of heat on bioceramic sealers depends on the sealer's composition and laboratory setting. While some sealers are affected significantly, others remain stable. Clinicians should carefully consider these factors when bioceramic sealers are used with warm obturation techniques, but caution is needed as real-world conditions may vary. Integrating laboratory results with clinical evidence is essential for improving treatment efficacy and patient care.

Assessment of Dormancy Level and Germination Ability of Seeds with Physiological Dormancy.

Germination test is fundamental and commonly used technique for seed dormancy and germination studies, and proper assessment of dormancy level and germination ability of a given set of seeds is prerequisite for most of the studies. However, germination is very sensitive to imbibition conditions, and dormancy development is also sensitive to growth conditions of the mother plants. In this chapter, we describe tips for plant growth and germination test mainly for physiological and molecular genetic studies with Arabidopsis. This protocol can be applied for other plant species with relatively small seeds and for various studies to analyze the effect of light, phytohormones, and other chemicals in seed germination.

A Seed Storage Protocol to Determine Longevity.

The longevity of seeds, also known as storability, is the period of time for which a seed lot maintains its viability during storage. The method aims to determine longevity of a seed lot during storage in a controlled environment. Seeds are first rehydrated to a preset water content (or relative humidity, RH) and then incubated under controlled conditions for various periods of time to allow for deterioration to occur. At increasing intervals during storage, seeds are retrieved and viability is tested by scoring germination of the seed lot (i.e., radicle protrusion). From these data, a survival curve can be drawn depicting loss of germination during time of storage from which different parameters estimating longevity can be inferred. These parameters can be used to compare longevity between different seed lots, genotypes, or species at similar storage conditions. This test can also be used as a proxy to measure seed vigor or physiological seed quality.

Catheter-related and clinical complications associated with QDOT MICROTM Ablation Catheter.

INTRODUCTION: The QDOT MICROTM Ablation Catheter is a next-generation ablation catheter that allows for high-power ablation up to 90 watts. METHODS: We aimed to assess AE associated with the QDOT MICROTM catheter using the MAUDE database. A MAUDE database search was conducted on May 25, 2024, to capture all AEs (since FDA approval) associated with this ablation catheter. RESULTS: A total of 302 AEs from November 23, 2022, to April 30, 2024, were reported including 148 (49%) catheter-related issues and 154 (51%) clinical complications. Among the catheter-related issues, physical catheter damage (74.3%, n = 110) was most common, followed by communication or display issue (10.8%, n = 16), irrigation issue (9.5%, n = 14), signal issue or artifact (3.4%, n = 5), and inaccurate temperature measurement (2.0%, n = 3). Regarding clinical complications, the most common AE was pericardial effusion (43.5%, n = 67), followed by char formation (11.7%, n = 18), catheter thrombosis (7.1%, n = 11), stroke (7.1%, n = 11), pericarditis (7.1%, n = 11), esophageal complications (6.5%, n = 10), phrenic nerve palsy (3.9%, n = 6), cardiac arrest (3.9%, n = 6), significant AV block (3.9%, n = 6), pulmonary vein stenosis (3.2%, n = 5), coronary artery spasm (1.3%, n = 2), and pulmonary embolism (0.6%, n = 1). There were 11 deaths (five related to esophageal complications, five related to cardiac arrest, and one related to pericardial effusion with cardiac tamponade). CONCLUSION: As high-power ablation strategy with novel ablation catheters is becoming more widely utilized, operators must be aware of potential catheter-related issues and clinical complications that may arise. More data are needed to further evaluate risks of these complications to improve the catheter's safety and efficacy.

Short-term high-light intensity and low temperature improve the quality and flavor of lettuce grown in plant factory.

BACKGROUND: Lettuce holds a prominent position in the year-round supply of vegetables, offering a rich array of health-beneficial substances, such as dietary fiber, phenolic compounds, lactucopicrin and lactucin. As such, its flavor has garnered increasing attention. Balancing the enhancement of beneficial compounds with the reduction of undesirable taste is a key focus of scientific research. To investigate short-term management to improve the nutritional quality and flavor of lettuce, combinations of different light intensities (200, 500 and 800 µm ol m-2 s-1) and temperatures (10 and 22 °C) were applied separately to 'Lollo Rosso' and 'Little Butter Lettuce' for 7 days before harvest. RESULTS: The results obtained showed that increasing light intensity at low temperatures decreased nitrate content and increased soluble sugar, soluble protein, anthocyanin and phenolic compound content. In the case of lettuce flavor, the bitterness-related metabolites such as lactucin and lactucopicrin were reduced with high light intensity at a low temperature of 10 °C. With this combination, the fructose and glucose contents increased, significantly improving lettuce flavor. CONCLUSION: Higher light intensity combined with low temperature for 7 days before harvest effectively improved the nutritional quality and flavor of lettuce, suggesting its great potential for use in horticultural practices. © 2024 Society of Chemical Industry.

The spliceosome impacts morphogenesis in the human fungal pathogen Candida albicans.

At human body temperature, the fungal pathogen Candida albicans can transition from yeast to filamentous morphologies in response to host-relevant cues. Additionally, elevated temperatures encountered during febrile episodes can independently induce C. albicans filamentation. However, the underlying genetic pathways governing this developmental transition in response to elevated temperatures remain largely unexplored. Here, we conducted a functional genomic screen to unravel the genetic mechanisms orchestrating C. albicans filamentation specifically in response to elevated temperature, implicating 45% of genes associated with the spliceosome or pre-mRNA splicing in this process. Employing RNA-Seq to elucidate the relationship between mRNA splicing and filamentation, we identified greater levels of intron retention in filaments compared to yeast, which correlated with reduced expression of the affected genes. Intriguingly, homozygous deletion of a gene encoding a spliceosome component important for filamentation (PRP19) caused even greater levels of intron retention compared with wild type and displayed globally dysregulated gene expression. This suggests that intron retention is a mechanism for fine-tuning gene expression during filamentation, with perturbations of the spliceosome exacerbating this process and blocking filamentation. Overall, this study unveils a novel biological process governing C. albicans filamentation, providing new insights into the complex regulation of this key virulence trait.IMPORTANCEFungal pathogens such as Candida albicans can cause serious infections with high mortality rates in immunocompromised individuals. When C. albicans is grown at temperatures encountered during human febrile episodes, yeast cells undergo a transition to filamentous cells, and this process is key to its virulence. Here, we expanded our understanding of how C. albicans undergoes filamentation in response to elevated temperature and identified many genes involved in mRNA splicing that positively regulate filamentation. Through transcriptome analyses, we found that intron retention is a mechanism for fine-tuning gene expression in filaments, and perturbation of the spliceosome exacerbates intron retention and alters gene expression substantially, causing a block in filamentation. This work adds to the growing body of knowledge on the role of introns in fungi and provides new insights into the cellular processes that regulate a key virulence trait in C. albicans.

Fixed-target pump-probe SFX: eliminating the scourge of light contamination.

X-ray free-electron laser (XFEL) light sources have enabled the rapid growth of time-resolved structural experiments, which provide crucial information on the function of macromolecules and their mechanisms. Here, the aim was to commission the SwissMX fixed-target sample-delivery system at the SwissFEL Cristallina experimental station using the PSI-developed micro-structured polymer (MISP) chip for pump-probe time-resolved experiments. To characterize the system, crystals of the light-sensitive protein light-oxygen-voltage domain 1 (LOV1) from Chlamydomonas reinhardtii were used. Using different experimental settings, the accidental illumination, referred to as light contamination, of crystals mounted in wells adjacent to those illuminated by the pump laser was examined. It was crucial to control the light scattering from and through the solid supports otherwise significant contamination occurred. However, the results here show that the opaque MISP chips are suitable for defined pump-probe studies of a light-sensitive protein. The experiment also probed the sub-millisecond structural dynamics of LOV1 and indicated that at Δt = 10 µs a covalent thioether bond is established between reactive Cys57 and its flavin mononucleotide cofactor. This experiment validates the crystals to be suitable for in-depth follow-up studies of this still poorly understood signal-transduction mechanism. Importantly, the fixed-target delivery system also permitted a tenfold reduction in protein sample consumption compared with the more common high-viscosity extrusion-based delivery system. This development creates the prospect of an increase in XFEL project throughput for the field.

The Effect of Targeted Temperature Therapy on Antioxidant Levels in Patients With Spontaneous Circulation After Cardiac Arrest.

Introduction In this study, we aimed to measure the change in total antioxidant status (TAS), total oxidant stress (TOS), oxidative stress index (OSI), and nuclear factor erythroid 2 (Nrf-2) levels during the treatment period in patients who restored spontaneous circulation return after cardiac arrest with targeted temperature management (TTM) therapy in our hospital. Methods The study included 36 patients who were hospitalized in the anesthesia intensive care unit and coronary intensive care unit of our hospital and were treated with TTM therapy after cardiac arrest. TAS, TOS, OSI, and Nrf-2 levels were measured at 0 (beginning), 12, 24, and 48 (end) hours of TTM therapy. Results The mean age of the patients participating in the study was 54.25±17.10. TAS and TOS levels decreased gradually during TTM therapy, but statistically significant decrease was observed at the end of the hour. When Nrf-2 and OSI levels were evaluated, it was found that no statistically significant difference was observed during the TTM therapy. Conclusion In our study, the oxidant-antioxidant balance was preserved in patients who received TTM therapy after cardiac arrest. We predict TTM therapy is effective on oxidative stress after cardiac arrest and should be applied for at least 48 hours.

Temperature and ST-segment morphology remote monitoring: new perspectives for implantable cardiac monitors in Brugada syndrome.

INTRODUCTION: Patients with Brugada syndrome (BrS) face an increased risk of ventricular arrhythmias and sudden cardiac death. Implantable cardiac monitors (ICMs) have emerged as effective tools for detecting arrhythmias in BrS. Technological advancements, including temperature sensors and improved subcutaneous electrocardiogram (subECG) signal quality, hold promise for further enhancing their utility in this population. METHODS AND RESULTS: We present a case of a 40-year-old man exhibiting a BrS type 2 pattern on 12-lead ECG, who underwent ICM insertion (BIOMONITOR IIIm, BIOTRONIK) due to drug-induced BrS type 1 pattern and a history of syncope, with a negative response to programmed ventricular stimulation. The device contains an integrated temperature sensor and can transmit daily vital data, such as mean heart rate and physical activity. Several months later, remote alerts indicated a temperature increase, along with transmitted subECGs suggesting a fever-induced BrS type 1 pattern. The patient was promptly advised to commence antipyretic therapy. Over the following days, remotely monitored parameters showed decreases in mean temperature, physical activity, and mean heart rate, without further recurrence of abnormal subECGs. CONCLUSION: ICMs offer valuable insights beyond arrhythmia detection in BrS. Early detection of fever using embedded temperature sensors may improve patient management, while continuous subECG morphological analysis has the potential to enhance risk stratification in BrS patients.

Quantitative determination of vanillin and its detection threshold in sake.

Vanillin is naturally occurring in various food products, including alcoholic beverages; however, its contribution to the aroma of sake is unclear. In this study, an HPLC-MS/MS quantification method was developed and validated by linearity, precision, and recovery, and it was applied to 115 bottles of highly diversified sake. Furthermore, the odor detection threshold of vanillin in sake was determined. Notably, the established method exhibited great linearity (5-1500 µg/L), with a R2 >0.99, and the limit of detection and limit of quantification were 1.7 and 5.5 µg/L, respectively. The spiked recoveries of vanillin ranged from 96.2% to 97.8%, with relative standard deviation ˂ 6.22%. Results revealed trace amounts to 29.9 µg/L of vanillin in the premium young sake, below the detection threshold (78.9 µg/L), whereas aged sake (43 bottles, 3-56 years aging) exhibited varied concentrations from trace amounts to 1727.5 µg/L of vanillin, notably peaking in a 20-year oak barrel-aged sake. The concentration of vanillin in most of the ambient-temperature-aged sake exceeded the detection threshold after 11-15 years of aging. The proposed method facilitates accurate vanillin quantification in sake, crucial for evaluating its flavor impact. Moreover, the discoveries provide a theoretical basis for the sensory exploration of sake aromas and equip the brewing industry with insights for modulating vanillin synthesis during sake aging.

The impacts of thermocouple insulation failure on the accuracy of temperature measurement data in forensic fire-death scenarios-Part I: Physical disintegration.

Thermocouples are utilized to monitor a wide range of temperatures in industrial applications. They are also used in both fire and forensic science research to measure temperatures of fires and of materials exposed to fire. Taking accurate temperature measurements during forensic fire-death scenarios is very difficult due to direct fire exposure to thermocouples, shrinkage and destruction of tissues, and movements from pyre collapse and pugilistic posturing of human donors. This two-part study investigates the impacts on the accuracy of temperature data if the selected thermocouples are unable to withstand fire exposure. Part I (this article) provides an overview of thermocouple theory along with evidence of the physical deterioration that occurs when glass fiber-insulated thermocouple wires are overheated by exposure to fire-level temperatures in a muffle furnace. This study verified that insulation overheating causes embrittlement and disintegration, which can cause the indicated temperature to reflect a new location of measurement located far away from the original measuring junction at the thermocouple tip. Part II will discuss the measurement errors that occurred due to low electrical resistance of insulation when three different thermocouple models were passed through fire-level temperatures to measure an ice bath at a constant temperature of 0°C.

The impacts of thermocouple insulation failure on the accuracy of temperature measurement data in forensic fire-death scenarios-Part II: Low electrical resistance and contamination.

Part II of this two-part article investigates the impact of thermocouple insulation failure on temperature measurement data in forensic fire-death scenarios. Two different models of glass fiber-insulated thermocouple wires (GG-K-24-SLE and HH-K-24 from Omega Engineering) were passed through a ceramic kiln at temperatures up to 1093°C to measure an ice bath at a constant 0°C. In a separate experiment, the same two models of thermocouple wire plus a BLMI-XL-K-18U-120 mineral-insulated metal-sheathed thermocouple probe were passed through a wood pallet fire to measure an ice bath. In the ceramic kiln, the effect on measurement errors was determined for short vs. long exposure lengths and clean insulation vs. insulation contaminated with pork fat. Glass fiber-insulated thermocouple wires showed severe failure in both experiments, with errors ranging from -270°C to almost 2200°C. The metal-sheathed probe showed no evidence of insulation failure and continued to accurately measure the ice bath temperature within expected margins of error around 0°C. This study highlights how exposure of inadequate thermocouples to fire-level temperatures produces severe errors in temperature data. Consequently, it will not be possible to use this data to draw any accurate conclusions about the effects of fire exposure to human donors or animal proxies.