Area of Feasible Figures of Merit (AF-FOMs) for second-order multivariate calibrations in Multivariate Curve Resolution (MCR).

BACKGROUND: The significance and necessity of using powerful multivariate curve resolution (MCR) techniques in the study and investigation of chemical systems are clear and obvious. It has long been recognized the importance of using second-order data to extract both quantitative and qualitative information in analytical chemistry through multivariate calibration instead of univariate calibration. Although the calculation of analytical figures of merit (AFOMs) in multivariate calibrations seems to be complicated, in recent years these parameters have been reported for each developed analytical method based on multivariate calibrations. RESULTS: It is well-known that using MCR to analyze second-order data may not produce a unique solution, a phenomenon associated with rotational ambiguity, which leads to the existence of a region or area of feasible solutions (AFS). This fact led us to argue that, instead of having uniquely defined AFOMs (sensitivity, selectivity, limit of detection, limit of quantitation, etc.), there should be an AFOM for every possible solution in the AFS. Following this argument, we report for the first time the generation of the Area of Feasible FOMs (AF-FOMs). The existence of a range of different FOMs in the AFS can be fully interpreted. It can also be predicted which AFOMs will have maximum or minimum values in each feasible band, and what kind of incremental or decremental changes will occur. Herein, the systematic grid search method was used to compute all feasible solutions and to calculate the AFOMs inside the feasible band. SIGNIFICANCE: The claims were supported by analyzing artificially generated two-component data sets. The data sets include a single calibrated analyte and a single uncalibrated interferent, which was only present in the test samples. In addition, real experimental data aimed at the determination of therapeutic drugs in both water and human urine samples were analyzed. Finally, the arguments were generalized to a three-component simulated system, having a single analyte and two uncalibrated interferents.

Supervised Factor Analysis Transfer: Calibration transfer with noise modeling and response variable integration.

Multivariate calibration models often encounter challenges in extrapolating beyond the calibration instruments due to variations in hardware configurations, signal processing algorithms, or environmental conditions. Calibration transfer techniques have been developed to mitigate this issue. In this study, we introduce a novel methodology known as Supervised Factor Analysis Transfer (SFAT) aimed at achieving robust and interpretable calibration transfer. SFAT operates from a probabilistic framework and integrates response variables into its transfer process to effectively align data from the target instrument to that of the source instrument. Within the SFAT model, the data from the source instrument, the target instrument, and the response variables are collectively projected onto a shared set of latent variables. These latent variables serve as the conduit for information transfer between the three distinct domains, thereby facilitating effective spectra transfer. Moreover, SFAT explicitly models the noise variances associated with each variable, thereby minimizing the transfer of non-informative noise. Furthermore, we provide empirical evidence showcasing the efficacy of SFAT across three real-world datasets, demonstrating its superior performance in calibration transfer scenarios.

Electronic waste analysis using laser-induced breakdown spectroscopy (LIBS) and X-ray fluorescence (XRF): Critical evaluation of data fusion for the determination of Al, Cu and Fe.

BACKGROUND: Electronic waste (e-waste) proliferation and its implications underscore the imperative for advanced analytical methods to mitigate its environmental impact. It is estimated that e-waste production stands at a staggering 20-50 million tons yearly, of which merely 20-25% undergo formal recycling. The e-waste samples evaluated contain computers, laptops, smartphones, and tablets. RESULTS: Forty-one samples were processed, involving the disassembly and separation of components. Subsequently, two analytical techniques, laser-induced breakdown spectroscopy (LIBS) and energy dispersive X-ray fluorescence (ED-XRF), were applied to quantify aluminum (Al), copper (Cu), and iron (Fe) in the e-waste samples. The samples were then analyzed after acid mineralization with 50% v v-1 aqua regia in a digester block and finally by ICP OES. A solid residue composed of Si and Ti was observed after the digestion of the samples. Multivariate calibration strategies such as partial least-squares regression (PLS), principal component regression (PCR), maximum likelihood principal component regression (MLPCR), and error covariance penalized regression (ECPR) were used for calibration. Finally, the figures of merit were calculated to verify the most suitable models. The results revealed robust models with notable sensitivity, varying from 8.98 to 35.04 Signal (a.u.)(% w w-1) -1, low Limits of Detection (LoD) within the range of 0.001-0.2 % w w-1, and remarkable relative errors ranging from 2% to 33%, particularly for Cu and Fe. SIGNIFICANCE: Notably, the models for Al faced inherent challenges, thus highlighting the complexities associated with its quantification in e-waste samples. In conclusion, this research represents an important step toward a more sustainable and efficient future for electronic waste recycling, signifying its relevance to global environmental welfare and resource conservation.

Quantitative determination of dopamine in the presence of interfering substances supported by machine learning tools.

In the field of neuroscience as well as in the clinical setting, the neurotransmitter dopamine (DA) is an analyte which is important for research as well as medical purposes. There are plenty of methods available to measure dopamine quantitatively, with voltammetric ones such as differential pulse voltammetry (DPV) being among the most convenient and simple ones. However, dopamine often occurs, either naturally or because of the requirements of involved enzymatic systems, alongside substances that can influence the signal it produces upon electrochemical conversion. An example for such substances is the magnesium ion, which itself is not electrochemically active in the potential range needed for DA oxidation, but influences the dopamine signal. We have characterized the properties of DPV signals subject to the interaction between DA and Mg2+ and show that, although these properties are changing in a nonlinear fashion when both concentrations are varying, relatively simple linear mathematical models can be used to determine dopamine concentrations quantitatively in the presence of magnesium ions. The focus of this study is thus, the mathematical treatment of experimental data in order to overcome an analytical problem and not the investigation of the chemical background of DA-Mg2+ interaction.

Fuel forensics: Recent advancements in profiling of adulterated fuels by ATR-FTIR spectroscopy and chemometric approaches.

Gasoline and diesel are the main petroleum products used for road transportation in India. Due to this reason, adulteration can be done by fraudsters using different miscible substances such as kerosene, turpentine, thinner, ethanol etc. In this work, Fourier transform infrared spectroscopy (FTIR) coupled with principal component analysis (PCA) and partial least square regression (PLSR) were used to investigate adulteration in petroleum products and to design an adulterant profiling. ATR-FTIR has an advantage over other traditional methods as it is less time-consuming and needs no extraction procedure. The samples used for the study were prepared by adding different volume of adulterant (0-20%) to standard diesel and gasoline samples. According to the results obtained from this study, ATR-FTIR spectroscopy proved to be the most comprehensible method for the detection of adulteration in diesel and gasoline fuels. Furthermore, the use of FTIR spectroscopy combined with PCA got best segregation of adulterated samples. The predictive model achieved a root mean square error of prediction of 0.477% and 0.592% for diesel and gasoline respectively.

Rapid quantification of grapeseed oil multiple adulterations using near-infrared spectroscopy coupled with a novel double ensemble modeling method.

As a high-quality edible oil, grapeseed oil is often adulterated with low-price/quality vegetable oils. A novel ensemble modeling method is proposed for quantitative analysis of grapeseed oil adulterations combined with near-infrared (NIR) spectroscopy. The method combines Monte Carlo (MC) sampling and whale optimization algorithm (WOA) to build numerous partial least squares (PLS) sub-models, named MC-WOA-PLS. A total of 80 adulterated grapeseed oil samples were prepared by mixing grapeseed oil with soybean oil, palm oil, cottonseed oil, and corn oil with the designed mass percentages. NIR spectra of the 80 samples were measured in a transmittance mode in the range of 12,000-4000 cm-1. Parameters in MC-WOA-PLS including the number of latent variables (LVs) in PLS, iteration number of WOA, whale number, number of PLS sub-models, and percentage of training subsets were optimized. To validate the prediction performance of the model, root mean square error of calibration (RMSEC), root mean square error of cross-validation (RMSECV), root mean squared error of prediction (RMSEP), correlation coefficient (R), residual predictive deviation (RPD), and standard deviation (S.D.) were used. Compared with PLS, standard normal variate-PLS (SNV-PLS), uninformative variable elimination-PLS (UVE-PLS), Monte Carlo uninformative variable elimination-PLS (MCUVE-PLS), randomization test-PLS (RT-PLS), variable importance in projection-PLS (VIP-PLS), and WOA-PLS, MC-WOA-PLS achieves the best prediction accuracy and stability for quantification of the five pure oils in adulterated grapeseed oil samples.

Tapping the Full Potential of Infrared Spectroscopy for the Analysis of Technical Lignins.

We present an approach to overcome the challenges associated with the increasing demand of high-throughput characterization of technical lignins, a key resource in emerging bioeconomies. Our approach offers a resort from the lack of direct, simple, and low-cost analytical techniques for lignin characterization by employing multivariate calibration models based on infrared (IR) spectroscopy to predict structural properties of lignins (i. e., functionality, molar mass). By leveraging a comprehensive database of over 500 well-characterized technical lignin samples - a factor of 10 larger than previously used sets - our chemometric models achieved high levels of quality and statistical confidence for the determination of different functional group contents (RMSEPs of 4-16 %). However, the statistical moments of the molar mass distribution are still best determined by size-exclusion chromatography. Analyses of over 500 technical lignins offered also a great opportunity to provide information on the general variability in kraft lignins and lignosulfonates (from different origins). Overall, the effected savings in analysis time (>7 h), resources, and required sample mass combined with non-destructiveness of the measurement satisfy key demands for efficient high-throughput lignin analyses. Finally, we discuss the advantages, disadvantages, and limitations of our approach, along with critical insights into the associated chemical-analytical and spectroscopic challenges.

Near-infrared spectra dataset of milk composition in transmittance mode.

Monitoring of milk composition can support several dimensions of dairy management such as identification of the health status of individual dairy cows and the safeguarding of dairy quality. The quantification of milk composition has been traditionally executed employing destructive chemical or laboratory Fourier-transform infrared (FTIR) spectroscopy analyses which can incur high costs and prolonged waiting times for continuous monitoring. Therefore, modern technology for milk composition quantification relies on non-destructive near-infrared (NIR) spectroscopy which is not invasive and can be performed on-farm, in real-time. The current dataset contains NIR spectral measurements in transmittance mode in the wavelength range from 960 nm to 1690 nm of 1224 individual raw milk samples, collected on-farm over an eight-week span in 2017, at the experimental dairy farm of the province of Antwerp, 'Hooibeekhoeve' (Geel, Belgium). For these spectral measurements, laboratory reference values corresponding to the three main components of raw milk (fat, protein and lactose), urea and somatic cell count (SCC) are included. This data has been used to build multivariate calibration models to predict the three milk compounds, as well as develop strategies to monitor the prediction performance of the calibration models.

Comparison between Variable-Selection Algorithms in PLS Regression with Near-Infrared Spectroscopy to Predict Selected Metals in Soil.

Soil is one of the Earth's most important natural resources. The presence of metals can decrease environmental quality if present in excessive amounts. Analyzing soil metal contents can be costly and time consuming, but near-infrared (NIR) spectroscopy coupled with chemometric tools can offer an alternative. The most important multivariate calibration method to predict concentrations or physical, chemical or physicochemical properties as a chemometric tool is partial least-squares (PLS) regression. However, a large number of irrelevant variables may cause problems of accuracy in the predictive chemometric models. Thus, stochastic variable-selection techniques, such as the Firefly algorithm by intervals in PLS (FFiPLS), can provide better solutions for specific problems. This study aimed to evaluate the performance of FFiPLS against deterministic PLS algorithms for the prediction of metals in river basin soils. The samples had their spectra collected from the region of 1000-2500 nm. Predictive models were then built from the spectral data, including PLS, interval-PLS (iPLS), successive projections algorithm for interval selection in PLS (iSPA-PLS), and FFiPLS. The chemometric models were built with raw data and preprocessed data by using different methods such as multiplicative scatter correction (MSC), standard normal variate (SNV), mean centering, adjustment of baseline and smoothing by the Savitzky-Golay method. The elliptical joint confidence region (EJCR) used in each chemometric model presented adequate fit. FFiPLS models of iron and titanium obtained a relative prediction deviation (RPD) of more than 2. The chemometric models for determination of aluminum obtained an RPD of more than 2 in the preprocessed data with SNV, MSC and baseline (offset + linear) and with raw data. The metals Be, Gd and Y failed to obtain adequate models in terms of residual prediction deviation (RPD). These results are associated with the low values of metals in the samples. Considering the complexity of the samples, the relative error of prediction (REP) obtained between 10 and 25% of the values adequate for this type of sample. Root mean square error of calibration and prediction (RMSEC and RMSEP, respectively) presented the same profile as the other quality parameters. The FFiPLS algorithm outperformed deterministic algorithms in the construction of models estimating the content of Al, Be, Gd and Y. This study produced chemometric models with variable selection able to determine metals in the Ipojuca River watershed soils using reflectance-mode NIR spectrometry.

Non-Targeted Detection and Quantification of Food Adulteration of High-Quality Stingless Bee Honey (SBH) via a Portable LED-Based Fluorescence Spectroscopy.

Stingless bee honey (SBH) is rich in phenolic compounds and available in limited quantities. Authentication of SBH is important to protect SBH from adulteration and retain the reputation and sustainability of SBH production. In this research, we use portable LED-based fluorescence spectroscopy to generate and measure the fluorescence intensity of pure SBH and adulterated samples. The spectrometer is equipped with four UV-LED lamps (peaking at 365 nm) as an excitation source. Heterotrigona itama, a popular SBH, was used as a sample. 100 samples of pure SBH and 240 samples of adulterated SBH (levels of adulteration ranging from 10 to 60%) were prepared. Fluorescence spectral acquisition was measured for both the pure and adulterated SBH samples. Principal component analysis (PCA) demonstrated that a clear separation between the pure and adulterated SBH samples could be established from the first two principal components (PCs). A supervised classification based on soft independent modeling of class analogy (SIMCA) achieved an excellent classification result with 100% accuracy, sensitivity, specificity, and precision. Principal component regression (PCR) was superior to partial least squares regression (PLSR) and multiple linear regression (MLR) methods, with a coefficient of determination in prediction (R2p) = 0.9627, root mean squared error of prediction (RMSEP) = 4.1579%, ratio prediction to deviation (RPD) = 5.36, and range error ratio (RER) = 14.81. The LOD and LOQ obtained were higher compared to several previous studies. However, most predicted samples were very close to the regression line, which indicates that the developed PLSR, PCR, and MLR models could be used to detect HFCS adulteration of pure SBH samples. These results showed the proposed portable LED-based fluorescence spectroscopy has a high potential to detect and quantify food adulteration in SBH, with the additional advantages of being an accurate, affordable, and fast measurement with minimum sample preparation.

Laser Sensing and Chemometric Analysis for Rapid Detection of Oregano Fraud.

World health is increasingly threatened by the growing number of spice-related food hazards. Further development of reliable methods for rapid, non-targeted identification of counterfeit ingredients within the supply chain is needed. ENEA has developed a portable, user-friendly photoacoustic laser system for food fraud detection, based on a quantum cascade laser and multivariate calibration. Following a study on the authenticity of saffron, the instrument was challenged with a more elusive adulterant, olive leaves in oregano. The results show that the reported method of laser sensing and chemometric analysis was able to detect adulterants at mass ratios of at least 20% in less than five minutes.

A green method for the authentication of sugarcane spirit and prediction of density and alcohol content based on near infrared spectroscopy and chemometric tools.

Cachaça is a Brazilian beverage obtained from the fermentation of sugarcane juice (sugarcane spirit) and is considered one of the most consumed alcoholic beverages in the world with a strong economic impact on the northeastern Brazil, more specifically in the Brejo. This microregion produces sugarcane spirits with high quality associated to edaphoclimatic conditions. In this sense, analysis for sample authentication and quality control that uses solvent-free, environmentally friendly, rapid and non-destructive methods is advantageous for cachaça producers and production chain. Thus, in this work commercial cachaça samples using near-infrared spectroscopy (NIRS) were classified based on geographical origin using one-class classification Data-Driven in Soft Independent Modelling of Class Analogy (DD-SIMCA) and One-Class Partial Least Squares (OCPLS) and predicted quality parameters of alcohol content and density based on different chemometric algorithms. A total of 150 sugarcane spirits samples were purchased from the Brazilian retail market being 100 from Brejo and 50 from other regions of Brazil. The one-class chemometric classification model was obtained with DD-SIMCA using the Savitzky-Golay derivative with first derivative, 9-point window and 1st degree polynomial as preprocessing algorithm and sensibility was 96.70 % and specificity 100 % in the spectral range 7,290-11,726 cm-1. Satisfactory results were obtained in the model constructs for density and the chemometric model, iSPA-PLS algorithm with baseline offset as preprocessing, obtained root mean square errors of prediction (RMSEP) of 0.0011 mg/L and Relative Error of Prediction (REP) of 0.12 %. The chemometric model for alcohol content prediction used the iSPA-PLS algorithm with Savitzky-Golay derivative with first derivative, 9-point window and 1st degree polynomial as algorithm as preprocessing obtaining RMSEP and REP of 0.69 and 1.81 % (v/v), respectively. Both models used the spectral range from 7,290-11,726 cm-1. The results reflected the potential of vibrational spectroscopy coupled with chemometrics to build reliable models for identifying the geographical origin of cachaça samples for predicting quality parameters in cachaça samples.

On-line monitoring of total sugar during kombucha fermentation process by near-infrared spectroscopy: Comparison of linear and non-linear multiple calibration methods.

Kombucha is widely recognized for its health benefits, and it facilitates high-quality transformation and utilization of tea during the fermentation process. Implementing on-line monitoring for the kombucha production process is crucial to promote the valuable utilization of low-quality tea residue. Near-infrared (NIR) spectroscopy, together with partial least squares (PLS), backpropagation neural network (BPANN), and their combination (PLS-BPANN), were utilized in this study to monitor the total sugar of kombucha. In all, 16 mathematical models were constructed and assessed. The results demonstrate that the PLS-BPANN model is superior to all others, with a determination coefficient (R2p) of 0.9437 and a root mean square error of prediction (RMSEP) of 0.8600 g/L and a good verification effect. The results suggest that NIR coupled with PLS-BPANN can be used as a non-destructive and on-line technique to monitor total sugar changes.

Multi-spectroscopic assay methods for concurrent determination of recent anti-gout combination, a comparative study.

Recently, Chemometric calibration methods in spectrophotometric analysis are achieving significant attention in the quality control of resolving drug mixtures and pharmaceutical formulations containing two or more drugs with overlapping spectra. The simple univariate methods have been used over the last few decades and has proven to be highly efficient and easy to apply. In this study, a comparative study was performed between some univariate and multivariate methods to determine if chemometric methods can substitute univariate methods in pharmaceutical analysis. In this study, three chemometric techniques were compared to seven univariate techniques to resolve a mixture of mefenamic acid and febuxostat in their raw materials, dosage forms and spiked human plasma. Mefenamic acid and febuxostat were used together for treatment of gout. The applied chemometric methods are partial least squares (PLS), artificial neural network (ANN) and genetic algorithm partial least squares (GA-PLS), while the used univariate methods include first derivative, second derivative, ratio spectra, derivative ratio spectra, ratio subtraction, Q-Absorbance ratio and mean centering spectrophotometric methods. The ten proposed methods were found to be green, sensitive, and rapid. They are simple and did not require any pre-separation steps. The results of both univariate and multivariate approaches were statistically compared with the reported spectrophotometric methods using student's t test and ratio variance F-test. They were also compared with each other, using one-way analysis of variance (ANOVA). These methods were assessed and validated according to ICH guidelines. The studied drugs were analyzed in their pharmaceutical dosage forms and spiked human plasma with good recoveries using the developed methods, which qualify them for routine quality control of the studied drugs.

Tea authentication and determination of chemical constituents using digital image-based fingerprint signatures and chemometrics.

Tea (Camellia sinensis) fraud has been frequently identified and involves tampering with the labelling of inferior products or without geographical origin certification and even mixing them with superior quality teas to mask an adulteration. Consequently, economic losses and health damage to consumers are observed. Thus, a Chemometrics-assisted Color Histogram-based Analytical System (CACHAS) was employed a simple, cost-effective, reliable, and green analytical tool to screen the quality of teas. Data-Driven Soft Independent Modeling of Class Analogy was used to authenticate their geographical origin and category simultaneously, recognizing correctly all Argentinean and Sri Lankan black teas and Argentinean green teas. For the determination of moisture, total polyphenols, and caffeine, Partial Least Squares obtained satisfactory predictive abilities, with values of root mean squared error of prediction (RMSEP) of 0.50, 0.788, and 0.25 mg kg-1, rpred of 0.81, 0.902, and 0.81, and relative error of prediction (REP) of 6.38, 9.031, and 14.58%., respectively. CACHAS proved to be a good alternative tool for environmentally-friendly non-destructive chemical analysis.

Quantitative determination of phenolic compounds in propolis samples from the Black Sea Region (Türkiye) based on HPTLC images using partial least squares and genetic inverse least squares methods.

The complex chemical composition of propolis is related to the plant source to be used by honeybees. Propolis type is defined based on the plant source with the highest proportion in its composition, which is determined by chromatographic techniques as high-performance thin-layer chromatography (HPTLC). In addition to marker component identification to specify the propolis type, quantification of its proportion is also significant for prediction and reproducible pharmacological activity. One drawback for propolis marker component quantitation is that during the chromatographical analysis, not the main but the other plant sources with less proportion may cause interferences during the chemical analysis. In this study, the amounts of marker components were compared with the reference analysis data obtained by high-performance liquid chromatography (HPLC) and from HPTLC images using Partial Least Squares (PLS) and Genetic Inverse Least Squares (GILS) regression methods. Firstly, HPTLC images of propolis samples were processed by an image algorithm (developed in MATLAB) where the bands of each standard and the samples were cut same dimensional pieces as 351 × 26 pixels in height and width, respectively. Simultaneously, reference analysis of the marker components in propolis samples was performed with a validated HPLC method. Consequently, the reference values obtained from HPLC versus PLS, and GILS predicted values of the eight compounds based on the digitized HPTLC images of the chromatograms were found to be matched successfully. The results of the multivariate calibration models demonstrated that HPTLC images could be used quantitatively for quality control of propolis used as a food supplement.

Quantitative analysis of terahertz signals using CWT-based spectrogram and Zernike image moments.

The combination of terahertz (THz) spectroscopic measurements and multivariate calibration techniques has become a well-established technique in many research fields. However, intentional or unintentional changes in environmental conditions, THz instruments and/or of the substance itself make the established calibration model becoming insufficient and inadequate for the further application. In this article, we introduce, discuss, and evaluate a new multivariate calibration method, the CWT-ZM, that combines the merits of the Zernike moment (ZM) invariance and the continuous wavelet transform (CWT) time-frequency analysis. With the help of a wavelet time-frequency analysis, the THz pulse is expanded into a two-dimensional (2D) time-frequency plane that provides richer and more direct characteristic information in the time and frequency domain simultaneously. In addition, Zernike moments provide linearly independent descriptors for the 2D time-frequency intensity image and are invariant to THz signal affine transformations, such as peak shifting, baseline drifting, and scaling. In this manner, we obtain a set of features that exhibit a high capability to capture the concentrations of the target compounds and a high invariance of the different measuring instruments and the variable environment. This approach results in a more robust regression system with improved generalization properties with respect to standard methods. Experiments were then conducted on a THz dataset of pharmaceutical tablets acquired by two different THz instruments, and these confirmed the effectiveness of the proposed approach. Furthermore, CWT-ZM is an extensible framework that can be combined with various spectral qualitative and quantitative analysis algorithms.

Development of a voltammetric electronic tongue for the simultaneous determination of synthetic antioxidants in edible olive oils.

A voltammetric electronic tongue (E-tongue) is "a multisensor system, which consists of a number of low-selective sensors and uses advanced mathematical procedures for signal processing based on pattern recognition and/or data multivariate analysis such as artificial neural networks (ANNs), principal component analysis (PCA), among others". Thus, E-tongues in combination with chemometrics tools result in more accurate and selective analytical methods. In this work, we report results of a simple and reliable electroanalytical method to determine butyl hydroxyanisole (BHA), butyl hydroxytoluene (BHT) and propyl gallate (PG) in edible olive oils (EOO). Therefore, the square wave voltammetry (SWV) was used on platinum and carbon fiber disk ultramicroelectrodes (E-tongue configuration) combined with chemometrics tools to perform these studies. On the other hand, two data fusion strategies were used in order to combine electrochemical data obtained for each working electrode in the E-tongue: low-level data fusion (LLDF) and mid-level data fusion (MLDF). In addition, to reduce the dimensionality of the dataset in MLDF, the discrete wavelet transform (DWT) was used. Finally, to assert the predictive capability of the method for BHA, BHT, and PG determination in real samples, a recovery study for the antioxidants in EOO samples was performed, demonstrating the analytical accuracy of the proposed method. Moreover, from the comparison between the proposed electrochemical method with the AOAC reference method and others found in the literature in terms of the quality of the model (REP %) and the percent recovery assays (%) in different samples, our results were better than other reported previously for the simultaneous determination of BHA, BHT, and PG in real samples. Moreover, the percent recovery assays obtained with the proposed electrochemical method were in good agreement with those obtained by the chromatographic method.

Near-infrared spectroscopy based monitoring of all 20 amino acids in mammalian cell culture broth.

The biopharmaceutical industry extensively employs Chinese hamster ovary (CHO) cell culture for monoclonal antibody production. Amino acids represent an essential source of nutrients in all CHO cell culture media, and their concentration is known to significantly impact cell viability, titre, and monoclonal antibody critical quality attributes. In this study, a robust Fourier transform near-infrared spectroscopy (FT-NIR) based quantification method has been developed for of all 20 amino acids (0-24 mM), as well as concentrations of glucose (0-6.7 mg mL-1), lactate (0-2.7 mg mL-1), and trastuzumab (0-2.5 mg mL-1) in the CHO cell culture. Near infra-red absorbance spectrum in the range of 4000-11,000 cm-1 were acquired, and spectra pre-processing through smoothening and derivatives were employed to enhance key characteristic signals. High-performance liquid chromatography with pre-column derivatization was used as the orthogonal analytical tool for quantification. Principal component analysis and partial least squares regression were employed for region selection and calibration model development, respectively. The results demonstrate that a good calibration statistic with the acceptable coefficient of determinations for both calibration (Rc2 = 0.94-0.99) and prediction (Rp2 = 0.83-0.98) could be achieved, along with high RPD values (>3) for all components except alanine (2.4). The external validation study also exhibited a satisfactory outcome (REV2 = 0.89-0.99, RMSE = 0.04-1.04), validating the model's ability to predict the concentrations of the respective species. The calibration models were successfully applied for at-line monitoring of two perfusion runs on a 10 L scale. To our knowledge, this is the first application where NIR spectroscopy-based measurement of all 20 amino acids in mammalian cell culture samples has been demonstrated. The proposed tool can play a critical role as biopharma manufacturers implement continuous processing as well as for facilitating process analytical technology-based control of mammalian cell culture processes.

Near infrared spectroscopic variable selection by a novel swarm intelligence algorithm for rapid quantification of high order edible blend oil.

The quantification of single oil in high order edible blend oil is a challenging task. In this research, a novel swarm intelligence algorithm, discretized whale optimization algorithm (WOA), was first developed for reducing irrelevant variables and improving prediction accuracy of hexanary edible blend oil samples. The WOA is inspired by hunting strategy of humpback whales, which mainly includes three behaviors, i.e., encircling prey, bubble-net attacking and searching for prey. In discretized WOA, positions of whales were updated and then discretized by arctangent function. The whale population performance, iteration number and whale number of WOA were investigated. To validate the performance of selected variables, partial least squares (PLS) was used to build model and predict single oil contents in hexanary blend oil. Results show that WOA-PLS can provide the best prediction accuracy compared with full-spectrum PLS, continuous wavelet transform-PLS (CWT-PLS), uninformative variable elimination-PLS (UVE-PLS), Monte Carlo uninformative variable elimination-PLS (MCUVE-PLS) and randomization test-PLS (RT-PLS). Furthermore, CWT-WOA-PLS can further produce better results with fewer variables compared with WOA-PLS.