Effects of Cross-linker Chemistry on Bioelectrocatalytic Reactions in a Redox Cross-linked Network of Glucose Dehydrogenase and Thionine.

Enzyme-mediator bioconjugation is emerging as a building block for designing electrode platforms for the construction of biosensors and biofuel cells. Here, we report a one-pot bioconjugation technique for flavin adenine dinucleotide-dependent glucose dehydrogenase (FAD-GDH) and thionine (TH) using a series of cross-linkers, including epoxy, N-hydroxysuccinimide (NHS), and aldehydes. In this technique, FAD-GDH and thionine are conjugated through an amine cross-linking reaction to generate a redox network, which has been successfully employed for the oxidation of glucose. The bioconjugation chemistry of cross-linkers with the amino groups on FAD-GDH and thionine plays a vital role in generating distinct network structures. The epoxy-type cross-linker reacts with the primary and secondary amines of thionine at room temperature, thereby producing an FAD-GDH-TH-FAD-GDH hyperbranched bioconjugate network, the aldehyde undergoes a rapid cross-linking reaction to produce a network of FAD-GDH-FAD-GDH, while the NHS-based cross-linker can react with the primary amines of both FAD-GDH and thionine, forming an FAD-GDH-cross-linker-TH polymeric network. This reaction has the potential to enable the conjugation of a redox mediator with a FAD-GDH network, which is particularly essential when designing an enzyme electrode platform. The data demonstrated that the polymeric cross-linked network based on the NHS cross-linker exhibited a considerable increase in electron transport while producing a catalytic current of 830 µA cm-2. The cross-linker spacer arm length also affects the overall electrochemical function of the network and its performance; an adequate spacer length containing a cross-linker is required, resulting in a faster electron transfer. Finally, a leaching test confirmed that the stability of the enzyme electrode was improved when the electrode was tested using the redox probe. This study elucidates the relationship between cross-linking chemistry and redox network structure and enhances the high performance of enzyme electrode platforms for the oxidation of glucose.

Synthetic Nicotinamide Cofactors as Alternatives to NADPH in Imine Reductase-Catalyzed Reactions.

This study demonstrates the effectiveness of synthetic nicotinamide cofactors as cost-effective alternatives to NADPH in imine reductase (IRED) catalysis. The synthetic cofactors maintained catalytic activity and stereoselectivity, achieving high conversion rates. Molecular docking studies revealed key structural interactions influencing performance. Combining a glucose dehydrogenase (GDH) recycling system further enhanced the stability and efficiency. These findings highlight the potential of synthetic cofactors to reduce costs and improve the feasibility of IRED-catalyzed processes for industrial applications.

Bias-free glucose/O2 bio-photoelectrochemical system for multi-energy conversion and phenolic pollutant degradation.

Developing a multi-functional green energy device that propels sustainable energy development and concurrently purifies environmental pollutants offers an irresistibly compelling vision for a cleaner future. Herein, we reported a bias-free glucose/O2 bio-photoelectrochemical system (BPECS) for both energy conversion and phenolic pollutants degradation. Coupling a glucose dehydrogenase (GDH) modified self-assembled meso-tetrakis (4-carboxyphenyl)-porphyrin (SA-TCPP)-sensitized TiO2 biophotoanode for glucose oxidation and nitrogen/oxygen doped cobalt single-atom catalyst (CoNOC) cathode for two-electron oxygen reduction, both solar and biochemical energies were converted into electric power in BPECS with a maximum power density of 296.98 µW cm-2 (0.49 V). Working in synergy with horseradish peroxidase (HRP) biocatalysis, the cathode-generated H2O2, a by-product, is effectively redeployed for degrading phenol, attaining an impressive degradation efficiency of approximately 100% within 60 min. Additionally, aiming to scale up this ingenious BPECS approach, peroxidase-mimicking Co3O4 nanozyme were engineered as a substitute for natural HRP. Remarkably, these nanozyme demonstrated a comparable degradation efficiency, achieving the same result in 90 min. In this work, our results demonstrate that this bias-free glucose/O2 BPECS model marks a significant step forward in integrating renewable energy harvesting with environmental remediation, but also opens new avenues for the versatile application of nanozymes.

Nanoarchitectonics of Vesicle Microreactors for Oscillating ATP Synthesis and Hydrolysis.

We construct a compartmentalized nanoarchitecture to regulate bioenergy level. Glucose dehydrogenase, urease and nicotinamide adenine dinucleotide are encapsulated inside through liquid-liquid phase separation. ATPase and glucose transporter embedded in hybrid liposomes are attached at the surface. Glucose is transported and converted to gluconic acid catalyzed by glucose dehydrogenase, resulting in an outward proton gradient to drive ATPase for ATP synthesis. In parallel, urease catalyzes hydrolysis of urea to generate ammonia, which leads to an inward proton gradient to drive ATPase for ATP hydrolysis. These processes lead to a change of the direction of proton gradient, thus achieving artificial ATP oscillation. Importantly, the frequency and the amplitude of the oscillation can be programmed. The work explores nanoarchitectonics integrating multiple components to realize artificial and precise oscillation of bioenergy level.

A Multienzyme Logic H+ and Na+ Biotransducer.

Sodium ions and protons regulate various fundamental processes at the cell and tissue levels across all biological kingdoms. It is therefore pivotal for bioelectronic devices, such as biosensors and biotransducers, to control the transport of these ions through biological membranes. Our study explores the regulation of proton and sodium concentrations by integrating an Na+-type ATP synthase, a glucose dehydrogenase (GDH), and a urease into a multienzyme logic system. This system is designed to operate using various chemical control input signals, while the output current corresponds to the local change in proton or sodium concentrations. Therein, a H+ and Na+ biotransducer was integrated to fulfill the roles of signal transducers for the monitoring and simultaneous control of Na+ and H+ levels, respectively. To increase the proton concentration at the output, we utilized GDH driven by the inputs of glucose and nicotinamide adenine dinucleotide (NAD+), while recorded the signal change from the biotransducer, together acting as an AND enzyme logic gate. On the contrary, we introduced urease enzyme which hydrolyzed urea to control the decrease in proton concentration, serving as a NOT gate and reset. By integrating these two enzyme logic gates we formed a simple multienzyme logic system for the control of proton concentrations. Furthermore, we also demonstrate a more complex, Na+-type ATP synthase-urease multienzyme logic system, controlled by the two different inputs of ADP and urea. By monitoring the voltage of the peak current as the output signal, this logic system acts as an AND enzyme logic gate. This study explores how multienzyme logic systems can modulate biologically important ion concentrations, opening the door toward advanced biological on-demand control of a variety of bioelectronic enzyme-based devices, such as biosensors and biotransducers.

Enzymatic Precipitation of Highly Electroactive and Ion-Transporting Prussian Blue for a Sensitive Electrochemical Immunosensor.

Sensitive and/or multiplex electrochemical biosensors often require efficient (bio)catalytic conversion of substrates into insoluble electroactive products. The enzymatic formation and precipitation of coordination polymers under mild conditions offers a promising solution for this purpose. Herein, we report the enzymatic precipitation of Prussian blue (PB), a highly electroactive and ion-transporting coordination polymer, on an immunosensing electrode for application in a sensitive electrochemical immunosensor for detecting thyroid-stimulating hormone (TSH). Five pairs of redox enzymes and their specific reductants were examined to achieve rapid PB precipitation and electrochemical oxidation. Among these pairs, O2-insensitive flavin adenine dinucleotide-dependent glucose dehydrogenase (FAD-GDH) paired with glucose yielded the highest electrochemical signal-to-background (S/B) ratio. FAD-GDH catalyzed the conversion of Fe(CN)63- to Fe(CN)64-, which coordinated with Fe3+, leading to PB formation and subsequent precipitation through repeated conversions. The resulting PB precipitate, with its close proximity to the electrode, facilitated rapid electrochemical oxidation and generated a strong electrochemical signal. Notably, the precipitation and electrochemical oxidation of PB were more effective than those of its analogues. When applied to a sandwich-type immunosensor for TSH detection, the enzymatic PB precipitation achieved a calculated detection limit of approximately 2 pg/mL in artificial serum, covering the clinically relevant range. These findings indicate the potential widespread utility of PB precipitation and electrochemical oxidation for sensitive multiplex biomarker detection.

Harnessing Redox Polymer Dynamics for Enhanced Glucose-Oxygen Coupling in Dual Biosensing and Therapeutic Applications.

The burgeoning field of continuous glucose monitoring (CGM) for diabetes management faces significant challenges, particularly in achieving precise and stable biosensor performance under changing environmental conditions such as varying glucose concentrations and O2 levels. To address this, we present a novel biosensor based on the electroless coupling of glucose oxidation catalyzed by flavin-dependent glucose dehydrogenase (FAD-GDH) and O2 reduction catalyzed by bilirubin oxidase (BOD) via a redox polymer, dimethylferrocene-modified linear poly(ethylenimine), FcMe2-LPEI. Initial cyclic voltammetry tests confirm the colocalization of both enzymatic reactions within the potential range of the polymer, indicating an effective electron shuttle mechanism. As a result, we created a hybrid biosensor that operates at open-circuit potential (OCP). It can detect glucose concentrations of up to 100 mM under various O2 conditions, including ambient air. This resulted from optimizing the enzyme ratio to 120 ± 10 mUBOD·UFAD-GDH-1·atmO2-1. This biosensor is highly sensitive, a crucial feature for CGM applications. This distinguishes it from FAD-GDH traditional biosensors, which require a potential to be applied to measure glucose concentrations up to 30 mM. In addition, this biosensor demonstrates the ability to function as a noninvasive, external device that can adapt to changing glucose levels, paving the way for its use in diabetes care and, potentially, personalized healthcare devices. Furthermore, by leveraging the altered metabolic pathways in tumor cells, this system architecture opened up new avenues for targeted glucose scavenging and O2 reduction in cancer therapy.

Coupling protein scaffold and biosilicification: A sustainable and recyclable approach for d-mannitol production via one-step purification and immobilization of multienzymes.

Enzymatic synthesis of biochemicals in vitro is vital in synthetic biology for its efficiency, minimal by-products, and easy product separation. However, challenges like enzyme preparation, stability, and reusability persist. Here, we introduced a protein scaffold and biosilicification coupled system, providing a singular process for the purification and immobilization of multiple enzymes. Using d-mannitol as a model, we initially constructed a self-assembling EE/KK protein scaffold for the co-immobilization of glucose dehydrogenase and mannitol dehydrogenase. Under an enzyme-to-scaffold ratio of 1:8, a d-mannitol yield of 0.692 mol/mol was achieved within 4 h, 2.16-fold higher than the free enzymes. The immobilized enzymes retained 70.9 % of the initial joint activity while the free ones diminished nearly to inactivity after 8 h. Furthermore, we incorporated the biosilicification peptide CotB into the EE/KK scaffold, inducing silica deposition, which enabled the one-step purification and immobilization process assisted by Spy/Snoop protein-peptide pairs. The coupled system demonstrated a comparable d-mannitol yield to that of EE/KK scaffold and 1.34-fold higher remaining activities after 36 h. Following 6 cycles of reaction, the immobilized system retained the capability to synthesize 56.4 % of the initial d-mannitol titer. The self-assembly co-immobilization platform offers an effective approach for enzymatic synthesis of d-mannitol and other biochemicals.

Co-Immobilization of ADH and GDH on Metal-Organic-Framework: An Effective Biocatalyst for Asymmetric Reduction of Ketones.

Chiral alcohols are not only important building blocks of various bioactive natural compounds and pharmaceuticals, but can serve as synthetic precursors for other valuable organic chemicals, thus the synthesis of these products is of great importance. Bio-catalysis represents one effective way to obtain these molecules, however, the weak stability and high cost of enzymes often hinder its broad application. In this work, we designed a biological nanoreactor by embedding alcohol dehydrogenase (ADH) and glucose dehydrogenase (GDH) in metal-organic-framework ZIF-8. The biocatalyst ADH&GDH@ZIF-8 could be applied to the asymmetric reduction of a series of ketones to give chiral alcohols in high yields (up to 99 %) and with excellent enantioselectivities (>99 %). In addition, the heterogeneous biocatalyst could be recycled and reused at least four times with slight activity decline. Moreover, E. coli containing ADH and GDH was immobilized by ZIF-8 to form biocatalyst E. coli@ZIF-8, which also exhibits good catalytic behaviours. Finally, the chiral alcohols are further converted to marketed drugs (R)-Fendiline, (S)-Rivastigmine and NPS R-568 respectively.

Catalytic Synthesis of (S)-CHBE by Directional Coupling and Immobilization of Carbonyl Reductase and Glucose Dehydrogenase.

Ethyl (S)-4-chloro-3-hydroxybutyrate ((S)-CHBE) is an important chiral intermediate in the synthesis of the cholesterol-lowering drug atorvastatin. Studying the use of SpyTag/SpyCatcher and SnoopTag/SnoopCatcher systems for the asymmetric reduction reaction and directed coupling coenzyme regeneration is practical for efficiently synthesizing (S)-CHBE. In this study, Spy and Snoop systems were used to construct a double-enzyme directed fixation system of carbonyl reductase (BsCR) and glucose dehydrogenase (BsGDH) for converting 4-chloroacetoacetate (COBE) to (S)-CHBE and achieving coenzyme regeneration. We discussed the enzymatic properties of the immobilized enzyme and the optimal catalytic conditions and reusability of the double-enzyme immobilization system. Compared to the free enzyme, the immobilized enzyme showed an improved optimal pH and temperature, maintaining higher relative activity across a wider range. The double-enzyme immobilization system was applied to catalyze the asymmetric reduction reaction of COBE, and the yield of (S)-CHBE reached 60.1% at 30 °C and pH 8.0. In addition, the double-enzyme immobilization system possessed better operational stability than the free enzyme, and maintained about 50% of the initial yield after six cycles. In summary, we show a simple and effective strategy for self-assembling SpyCatcher/SnoopCatcher and SpyTag/SnoopTag fusion proteins, which inspires building more cascade systems at the interface. It provides a new method for facilitating the rapid construction of in vitro immobilized multi-enzyme complexes from crude cell lysate.

Orientation-Controllable Enzyme Cascade on Electrode for Bioelectrocatalytic Chain Reaction.

The accomplishment of concurrent interenzyme chain reaction and direct electric communication in a multienzyme-electrode is challenging since the required condition of multienzymatic binding conformation is quite complex. In this study, an enzyme cascade-induced bioelectrocatalytic system has been constructed using solid binding peptide (SBP) as a molecular binder that coimmobilizes the invertase (INV) and flavin adenine dinucleotide (FAD)-dependent glucose dehydrogenase gamma-alpha complex (GDHγα) cascade system on a single electrode surface. The SBP-fused enzyme cascade was strategically designed to induce diverse relative orientations of coupling enzymes while enabling efficient direct electron transfer (DET) at the FAD cofactor of GDHγα and the electrode interface. The interenzyme relative orientation was found to determine the intermediate delivery route and affect overall chain reaction efficiency. Moreover, interfacial DET between the fusion GDHγα and the electrode was altered by the binding conformation of the coimmobilized enzyme and fusion INVs. Collectively, this work emphasizes the importance of interenzyme orientation when incorporating enzymatic cascade in an electrocatalytic system and demonstrates the efficacy of SBP fusion technology as a generic tool for developing cascade-induced direct bioelectrocatalytic systems. The proposed approach is applicable to enzyme cascade-based bioelectronics such as biofuel cells, biosensors, and bioeletrosynthetic systems utilizing or producing complex biomolecules.

Electrochemical and biosensing properties of an FAD-dependent glucose dehydrogenase from Trichoderma virens.

We investigated the bioelectrochemical properties of an FAD-dependent glucose dehydrogenase from Trichoderma virens (TvGDH) and its electrochemical behaviour when immobilized on a graphite electrode. TvGDH was recently shown to have an unusual substrate spectrum and to prefer maltose over glucose as substrate, and hence could be of interest as recognition element in a maltose sensor. In this study, we determined the redox potential of TvGDH, which is -0.268 ± 0.007 V vs. SHE, and advantageously low to be used with many redox mediators or redox polymers. The enzyme was entrapped in, and wired by an osmium redox polymer (poly(1-vinylimidazole-co-allylamine)-{[Os(2,2'-bipyridine)2Cl]Cl}) with formal redox potential of +0.275 V vs. Ag|AgCl via poly(ethylene glycol) diglycidyl ether crosslinking onto a graphite electrode. When the TvGDH-based biosensor was tested with maltose it showed a sensitivity of 1.7 µA mM-1cm-2, a linear range of 0.5-15 mM, and a detection limit of 0.45 mM. Furthermore, it gave the lowest apparent Michaelis-Menten constant (KM app) of 19.2 ± 1.5 mM towards maltose when compared to other sugars. The biosensor is also able to detect other saccharides including glucose, maltotriose and galactose, these however also interfere with maltose sensing.

Designing a cross-linked redox network for a mediated enzyme-based electrode.

A bio-conjugated redox network matrix based on glucose dehydrogenase, thionine (diamine-containing mediator), and poly(ethylene glycol) diglycidyl ether (crosslinker) is developed on a glassy carbon electrode through covalent bonding with one-pot crosslinking. Electrons from the enzyme diffuse through the network producing 400 µA cm-2 of glucose oxidation current at 25 °C.

Orientated Immobilization of FAD-Dependent Glucose Dehydrogenase on Electrode by Carbohydrate-Binding Module Fusion for Efficient Glucose Assay.

The discovery or engineering of fungus-derived FAD-dependent glucose 1-dehydrogenase (FAD-GDH) is especially important in the fabrication and performance of glucose biosensors. In this study, a novel FAD-GDH gene, phylogenetically distantly with other FAD-GDHs from Aspergillus species, was identified. Additionally, the wild-type GDH enzyme, and its fusion enzyme (GDH-NL-CBM2) with a carbohydrate binding module family 2 (CBM2) tag attached by a natural linker (NL), were successfully heterogeneously expressed. In addition, while the GDH was randomly immobilized on the electrode by conventional methods, the GDH-NL-CBM2 was orientationally immobilized on the nanocellulose-modified electrode by the CBM2 affinity adsorption tag through a simple one-step approach. A comparison of the performance of the two electrodes demonstrated that both electrodes responded linearly to glucose in the range of 0.12 to 40.7 mM with a coefficient of determination R2 > 0.999, but the sensitivity of immobilized GDH-NL-CBM2 (2.1362 × 10-2 A/(M*cm2)) was about 1-fold higher than that of GDH (1.2067 × 10-2 A/(M*cm2)). Moreover, a lower detection limit (51 µM), better reproducibility (<5%) and stability, and shorter response time (≈18 s) and activation time were observed for the GDH-NL-CBM2-modified electrode. This facile and easy immobilization approach used in the preparation of a GDH biosensor may open up new avenues in the development of high-performance amperometric biosensors.

Co-immobilized Alcohol Dehydrogenase and Glucose Dehydrogenase with Resin Extraction for Continuous Production of Chiral Diaryl Alcohol.

Ni2+-functionalized porous ceramic/agarose composite beads (Ni-NTA Cerose) can be used as carrier materials to immobilize enzymes harboring a metal affinity tag. Here, a 6×His-tag fusion alcohol dehydrogenase Mu-S5 and glucose dehydrogenase from Bacillus megaterium (BmGDH) were co-immobilized on Ni-NTA Cerose to construct a packed bed reactor (PBR) for the continuous synthesis of the chiral intermediate (S)-(4-chlorophenyl)-(pyridin-2-yl) methanol ((S)-CPMA) NADPH recycling, and in situ product adsorption was achieved simultaneously by assembling a D101 macroporous resin column after the PBR. Using an optimum enzyme activity ratio of 2:1 (Mu-S5: BmGDH) and hydroxypropyl-ß-cyclodextrin as co-solvent, a space-time yield of 1560 g/(L·d) could be achieved in the first three days at a flow rate of 5 mL/min and substrate concentration of 10 mM. With simplified selective adsorption and extraction procedures, (S)-CPMA was obtained in 84% isolated yield.

Development of a Sensitive Self-Powered Glucose Biosensor Based on an Enzymatic Biofuel Cell.

Biofuel cells allow for constructing sensors that leverage the specificity of enzymes without the need for an external power source. In this work, we design a self-powered glucose sensor based on a biofuel cell. The redox enzymes glucose dehydrogenase (NAD-GDH), glucose oxidase (GOx), and horseradish peroxidase (HRP) were immobilized as biocatalysts on the electrodes, which were previously engineered using carbon nanostructures, including multi-wall carbon nanotubes (MWCNTs) and reduced graphene oxide (rGO). Additional polymers were also introduced to improve biocatalyst immobilization. The reported design offers three main advantages: (i) by using glucose as the substrate for the both anode and cathode, a more compact and robust design is enabled, (ii) the system operates under air-saturating conditions, with no need for gas purge, and (iii) the combination of carbon nanostructures and a multi-enzyme cascade maximizes the sensitivity of the biosensor. Our design allows the reliable detection of glucose in the range of 0.1-7.0 mM, which is perfectly suited for common biofluids and industrial food samples.

Construction and characterization of a novel glucose dehydrogenase-leucine dehydrogenase fusion enzyme for the biosynthesis of L-tert-leucine.

BACKGROUND: Biosynthesis of L-tert-leucine (L-tle), a significant pharmaceutical intermediate, by a cofactor regeneration system friendly and efficiently is a worthful goal all the time. The cofactor regeneration system of leucine dehydrogenase (LeuDH) and glucose dehydrogenase (GDH) has showed great coupling catalytic efficiency in the synthesis of L-tle, however the multi-enzyme complex of GDH and LeuDH has never been constructed successfully. RESULTS: In this work, a novel fusion enzyme (GDH-R3-LeuDH) for the efficient biosynthesis of L-tle was constructed by the fusion of LeuDH and GDH mediated with a rigid peptide linker. Compared with the free enzymes, both the environmental tolerance and thermal stability of GDH-R3-LeuDH had a great improved since the fusion structure. The fusion structure also accelerated the cofactor regeneration rate and maintained the enzyme activity, so the productivity and yield of L-tle by GDH-R3-LeuDH was all enhanced by twofold. Finally, the space-time yield of L-tle catalyzing by GDH-R3-LeuDH whole cells could achieve 2136 g/L/day in a 200 mL scale system under the optimal catalysis conditions (pH 9.0, 30 °C, 0.4 mM of NAD+ and 500 mM of a substrate including trimethylpyruvic acid and glucose). CONCLUSIONS: It is the first report about the fusion of GDH and LeuDH as the multi-enzyme complex to synthesize L-tle and reach the highest space-time yield up to now. These results demonstrated the great potential of the GDH-R3-LeuDH fusion enzyme for the efficient biosynthesis of L-tle.

Co-evolution of activity and thermostability of an aldo-keto reductase KmAKR for asymmetric synthesis of statin precursor dichiral diols.

Aldo-keto reductase KmAKR-catalyzed asymmetric reduction offers a green approach to produce dichiral diol tert-butyl 6-substituted-(3R,5R/S)-dihydroxyhexanoates, which are important building blocks of statins. In our previous work, we cloned a novel gene of NADPH-specific aldo-keto reductase KmAKR (WT) from a thermotolerant yeast Kluyveromyces marxianus ZJB14056 and a mutant KmAKR-W297H/Y296W/K29H (Variant III) has been constructed and displayed strict diastereoselectivity towards tert-butyl 6-cyano-(5R)-hydroxy-3-oxohexanoate ((5R)-1) but moderate activity and stability. Herein, to further co-evolve its activity and thermostability, we performed semi-rational engineering of Variant III by using a combinational screening strategy, consisting of tertiary structure analysis, loop engineering, and alanine scanning. As results, the "best" variant KmAKR-W297H/Y296W/K29H/Y28A/T63M (Variant VI) was acquired, whose Km, kcat/Km towards (5R)-1 was 0.66 mM and 210.77 s-1 mM-1, respectively, with improved thermostability (half-life of 14.13 h at 40 °C). Combined with 1.5 g dry cell weight (DCW) L-1Exiguobacterium sibiricum glucose dehydrogenase (EsGDH) for NADPH regeneration, 4.5 g DCW L-1Variant VI completely reduced (5R)-1 of up to 450 g L-1 within 7.0 h at 40 °C, yielding the corresponding optically pure tert-butyl 6-cyano-(3R,5R)-dihydroxyhexanoate ((3R,5R)-3, >99.5% d.e.p) with a space-time yield (STY) of 1.24 kg L-1 day-1, and this was the highest level documented in literatures so far on substrate loading and STY of producing (3R,5R)-3. Besides (5R)-1, Variant VI displayed strong activity on tert-butyl 6-chloro-(5S)-hydroxy-3-oxohexanoate ((5S)-2). 4.5 g DCW L-1Variant VI completely reduced 400 g L-1 (5S)-2, within 5.0 h at 40 °C, yielding optically pure tert-butyl 6-chloro-(3R,5S)-dihydroxyhexanoate ((3R,5S)-4, >99.5% d.e.p) with a STY of 1.34 kg L-1 day-1. In summary, Variant VI displayed industrial application potential in statins biomanufacturing.

Mimic of the Cellular Antioxidant Defense System for a Sustainable Regeneration of Nicotinamide Adenine Dinucleotide (NAD).

The prolonged use of enzymes under oxidative stress is a major challenge in enabling effective enzymatic reaction pathways. Herein, we report a biomimetic antioxidant defensive strategy capable of providing adequate protection of enzymes against superoxide-mediated oxidation. Superoxide dismutase (SOD) and catalase (CAT) were chosen as scavengers and covalently encapsulated into silica nanoreactors, together with glucose dehydrogenase (GDH), which simultaneously should produce the coenzyme nicotinamide adenine dinucleotide (NADH, reduced form). By the enzymatic reactions of SOD and CAT, the interior of silica nanoreactors becomes a "ROS safe zone" to protect the glucose-dependent NADH production of coencapsulated GDH. We further combined this protected NADH-producing module with photocatalytic nanoparticles that enable the light-triggered oxidation of NADH back to NAD+ (oxidized form). In combination, these two modules allow interconversion between NAD+ and NADH by the addition of glucose or by light irradiation (LED lamp or sunlight). This protection and regeneration strategy is a versatile tool for enzyme applications for biological reactors, catalysis, or prototypes of artificial organelles or building blocks that contains fragile biomolecules and rely on the coenzyme NAD+/NADH.

Evolution of Glucose Dehydrogenase for Cofactor Regeneration in Bioredox Processes with Denaturing Agents.

Glucose dehydrogenase (GDH) is a general tool for driving nicotinamide (NAD(P)H) regeneration in synthetic biochemistry. An increasing number of synthetic bioreactions are carried out in media containing high amounts of organic cosolvents or hydrophobic substrates/products, which often denature native enzymes, including those for cofactor regeneration. In this work, we attempted to improve the chemical stability of Bacillus megaterium GDH (BmGDHM0 ) in the presence of large amounts of 1-phenylethanol by directed evolution. Among the resulting mutants, BmGDHM6 (Q252L/E170K/S100P/K166R/V72I/K137R) exhibited a 9.2-fold increase in tolerance against 10 % (v/v) 1-phenylethanol. Moreover, BmGDHM6 was also more stable than BmGDHM0 when exposed to hydrophobic and enzyme-inactivating compounds such as acetophenone, ethyl 2-oxo-4-phenylbutyrate, and ethyl (R)-2-hydroxy-4-phenylbutyrate. Coupled with a Candida glabrata carbonyl reductase, BmGDHM6 was successfully used for the asymmetric reduction of deactivating ethyl 2-oxo-4-phenylbutyrate with total turnover number of 1800 for the nicotinamide cofactor, thus making it attractive for commercial application. Overall, the evolution of chemically robust GDH facilitates its wider use as a general tool for NAD(P)H regeneration in biocatalysis.