Comet-like mineralogy of olivine crystals in an extrasolar proto-Kuiper belt.

Some planetary systems harbour debris disks containing planetesimals such as asteroids and comets. Collisions between such bodies produce small dust particles, the spectral features of which reveal their composition and, hence, that of their parent bodies. A measurement of the composition of olivine crystals (Mg(2-2x)Fe(2x)SiO(4)) has been done for the protoplanetary disk HD 100546 (refs 3, 4) and for olivine crystals in the warm inner parts of planetary systems. The latter compares well with the iron-rich olivine in asteroids (x ≈ 0.29). In the cold outskirts of the ß Pictoris system, an analogue to the young Solar System, olivine crystals were detected but their composition remained undetermined, leaving unknown how the composition of the bulk of Solar System cometary olivine grains compares with that of extrasolar comets. Here we report the detection of the 69-micrometre-wavelength band of olivine crystals in the spectrum of ß Pictoris. Because the disk is optically thin, we can associate the crystals with an extrasolar proto-Kuiper belt a distance of 15-45 astronomical units from the star (one astronomical unit is the Sun-Earth distance), determine their magnesium-rich composition (x = 0.01 ± 0.001) and show that they make up 3.6 ± 1.0 per cent of the total dust mass. These values are strikingly similar to those for the dust emitted by the most primitive comets in the Solar System, even though ß Pictoris is more massive and more luminous and has a different planetary system architecture.

T Cells Promote Bronchial Epithelial Cell Secretion of Matrix Metalloproteinase-9 via a C-C Chemokine Receptor Type 2 Pathway: Implications for Chronic Lung Allograft Dysfunction.

Chronic lung allograft dysfunction (CLAD) is the major limitation of long-term survival after lung transplantation. CLAD manifests as bronchiolitis obliterans syndrome (BOS) or restrictive allograft syndrome (RAS). Alloimmune reactions and epithelial-to-mesenchymal transition have been suggested in BOS. However, little is known regarding the role of allogenicity in epithelial cell differentiation. Primary human bronchial epithelial cells (BECs) were treated with activated T cells in the presence or absence of transforming growth factor (TGF)-ß. The expression of epithelial and mesenchymal markers was investigated. The secretion of inflammatory cytokines and matrix metalloproteinase (MMP)-9 was measured in culture supernatants and in plasma from lung transplant recipients (LTRs): 49 stable, 29 with BOS, and 16 with RAS. We demonstrated that C-C motif chemokine 2 secreted by T cells supports TGF-ß-induced MMP-9 production by BECs after binding to C-C chemokine receptor type 2. Longitudinal investigation in LTRs revealed a rise in plasma MMP-9 before CLAD onset. Multivariate analysis showed that plasma MMP-9 was independently associated with BOS (odds ratio [OR] = 6.19, p = 0.002) or RAS (OR = 3.9, p = 0.024) and predicted the occurrence of CLAD 12 months before the functional diagnosis. Thus, immune cells support airway remodeling through the production of MMP-9. Plasma MMP-9 is a potential predictive biomarker of CLAD.

TLR3 promotes MMP-9 production in primary human airway epithelial cells through Wnt/ß-catenin signaling.

BACKGROUND: Airway epithelial cells (AEC) act as the first line of defence in case of lung infections. They constitute a physical barrier against pathogens and they participate in the initiation of the immune response. Yet, the modalities of pathogen recognition by AEC and the consequences on the epithelial barrier remain poorly documented. METHOD: We investigated the response of primary human AEC to viral (polyinosinic-polycytidylic acid, poly(I:C)) and bacterial (lipopolysaccharide, LPS) stimulations in combination with the lung remodeling factor Transforming Growth Factor-ß (TGF-ß). RESULTS: We showed a strong production of pro-inflammatory cytokines (Interleukin (IL)-6, Tumor Necrosis Factor α, TNFα) or chemokines (CCL2, CCL3, CCL4, CXCL10, CXCL11) by AEC stimulated with poly(I:C). Cytokine and chemokine production, except CXCL10, was Toll Like Receptor (TLR)-3 dependent and although they express TLR4, we found no cytokine production after LPS stimulation. Poly(I:C), but not LPS, synergised with TGF-ß for the production of matrix metalloproteinase-9 (MMP-9) and fibronectin. Mechanistic analyses suggest the secretion of Wnt ligands by AEC along with a degradation of the cellular junctions after poly(I:C) exposure, leading to the release of ß-catenin from the cell membrane and stimulation of the Wnt/ß-catenin pathway. CONCLUSION: Our results highlight the cross talk between TGF-ß and TLR signaling in bronchial epithelium and its impact on the remodeling process.

Warm water vapour in the sooty outflow from a luminous carbon star.

The detection of circumstellar water vapour around the ageing carbon star IRC +10216 challenged the current understanding of chemistry in old stars, because water was predicted to be almost absent in carbon-rich stars. Several explanations for the water were postulated, including the vaporization of icy bodies (comets or dwarf planets) in orbit around the star, grain surface reactions, and photochemistry in the outer circumstellar envelope. With a single water line detected so far from this one carbon-rich evolved star, it is difficult to discriminate between the different mechanisms proposed. Here we report the detection of dozens of water vapour lines in the far-infrared and sub-millimetre spectrum of IRC +10216 using the Herschel satellite. This includes some high-excitation lines with energies corresponding to approximately 1,000 K, which can be explained only if water is present in the warm inner sooty region of the envelope. A plausible explanation for the warm water appears to be the penetration of ultraviolet photons deep into a clumpy circumstellar envelope. This mechanism also triggers the formation of other molecules, such as ammonia, whose observed abundances are much higher than hitherto predicted.

Fiber orientation and crimp level might control the auxetic effect of biological tissues.

We propose an analytical micromechanical model for studying the lamellar-composite-like structure of fibrous soft tissue. The tissue under consideration is made up of several lamellae, and is designed to resemble the annulus fibrosus (AF) tissue or media layer of arterial tissue, for example. The collagen fibers are arranged in parallel in each lamella and the fiber orientation differs from one lamella to its neighbors. The parallel fibers in each lamella of AF tissue, for example, have been observed to have a crimped microstructure. The proposed model incorporates this quality, considering fiber waviness as a sinusoidal shape and taking into account the fiber dispersion in different layers, where both fiber and matrix are considered as solid phases. We find that collagen-fiber waviness and layer orientation have a significant influence on Poisson's ratio. The effective Poisson's ratio predicted by the proposed model demonstrates that the crimped collagen fiber microstructure might weaken the auxetic effect of fibrous soft tissue, which might explain why, as the literature suggests, the auxetic behavior is more difficult to observe than large Poisson's ratios. As opposed to the many studies that use the well-known hyperelastic fiber-based constitutive model, in which out-of-plane expansion is often observed, the present work explains the auxetic response found in modeling and in experimental data from the perspective of collagen fiber microstructure.

Comparison between the HyperArc™ technique and the CyberKnife® technique for stereotactic treatment of brain metastases.

PURPOSE: The purpose of this study was to compare the planimetric capacities between HyperArc™-based stereotactic radiosurgery and robotic radiosurgery system-based planning using CyberKnife® M6 for single and multiple cranial metastases. MATERIALS AND METHODS: We evaluated 51 treatment plans for cranial metastases, including 30 patients with a single lesion and 21 patients with multiple lesions, treated with the CyberKnife® M6. These treatment plans were optimized using the HyperArc™ (HA) system with the TrueBeam. The comparison of the quality of the treatment plans between the two treatment techniques (CyberKnife and HyperArc) was performed using the Eclipse treatment planning system. Dosimetric parameters were compared for target volumes and organs at risk. RESULTS: Coverage of the target volumes was equivalent between the two techniques, whereas median Paddick conformity index and median gradient index for all target volumes were 0.9 and 3.4, respectively for HyperArc plans, and 0.8 and 4.5 for CyberKnife plans (P<0.001). The median dose of gross tumor volume (GTV) for HyperArc and CyberKnife plans were 28.4 and 28.8, respectively. Total brain V18Gy and V12Gy-GTVs were 11cm3 and 20.2cm3 for HyperArc plans versus 18cm3 and 34.1cm3 for CyberKnife plans (P<0.001). CONCLUSION: The HyperArc provided better brain sparing, with a significant reduction in V12Gy and V18Gy, associated with a lower gradient index, whereas the CyberKnife gave a higher median GTV dose. The HyperArc technique seems to be more appropriate for multiple cranial metastases and for large single metastatic lesions.

Impact of fractionated stereotactic radiotherapy on activity of daily living and performance status in progressive/recurrent glioblastoma: a retrospective study.

BACKGROUND: The prognosis of recurrent glioblastoma (GBM) is poor, with limited options of palliative localized or systemic treatments. Survival can be improved by a second localized treatment; however, it is not currently possible to identify which patients would benefit from this approach. This study aims to evaluate which factors lead to a lower Karnofsky performance status (KPS) score after fractionated stereotactic RT (fSRT). METHODS: We retrospectively collected data from patients treated with fSRT for recurrent GBM at the Institut de Cancérologie de Lorraine between October 2010 and November 2017 and analyzed which factors were associated with a lower KPS score. RESULTS: 59 patients received a dose of 25 Gy in 5 sessions spread over 5-7 days (80% isodose). The median time from the end of primary radiotherapy to the initiation of fSRT was 10.7 months. The median follow-up after fSRT initiation was 8.8 months. The incidence of KPS and ADL impairment in all patients were 51.9% and 37.8% respectively with an adverse impact of PTV size on KPS (HR = 1.57 [95% CI 1.19-2.08], p = 0.028). Only two patients showed early grade 3 toxicity and none showed grade 4 or late toxicity. The median overall survival time, median overall survival time after fSRT, median progression-free survival and institutionalization-free survival times were 25.8, 8.8, 3.9 and 7.7 months, respectively. Initial surgery was associated with better progression-free survival (Hazard ratio (HR) = 0.48 [95% CI 0.27-0.86], p = 0.013). CONCLUSIONS: A larger PTV should predicts lower KPS in the treatment of recurrent GBM using fSRT.

Direct functionalization of an optical fiber by a plasmonic nanosensor.

We explore a rapid route for fabricating silver nanoparticles (NPs) at the end of an optical fiber. The size and number of silver NPs can be controlled by varying the exposure doses. The effect of the refractive index of different solvents on the extinction spectra have been studied as a proof of concept of a fiber integrated plasmon-based sensor.

Validation of a new fluidic device for mechanical stimulation and characterization of microspheres: A first step towards cartilage characterization.

Articular cartilage is made of chondrocytes surrounded by their extracellular matrix that can both sense and respond to various mechanical stimuli. One of the most widely used in vitro model to study cartilage growth is the model of mesenchymal stromal cells-derived cartilage micropellet. However, mechanical stimulation of micropellets has never been reported probably because of their small size and imperfect round shape. The objective of the study was to develop an original custom-made device allowing both the mechanical stimulation and characterization of cartilage micropellets. The fluidic-based device was designed for the concomitant stimulation or characterization of six microspheres placed into the conical wells of a tank. In the present study, the device was validated using alginate-, collagen- and crosslinked collagen-based microspheres. Different types and ranges of pressure signals (square, sinusoidal and constant) were applied. The mechanical properties of microspheres were equivalent to those determined by a conventional compression test. Accuracy, repeatability and reproducibility of all types of pressure signals were demonstrated even though square signals were less accurate and sinusoidal signals were less reproducible than the others. The interest of this new device lies in the reliability to mechanically stimulate and characterize microspheres with diameters in the range of 900 to 1500 µm. Mechanical stimulation can be performed on six microspheres in parallel allowing the mechanical and molecular characterization of the same group of cartilage micropellets. The device will be useful to evaluate the growth of cartilage micropellets under mechanical stimuli.

Spatially controlled synthesis of silver nanoparticles and nanowires by photosensitized reduction.

The present paper reports on the spatially controlled synthesis of silver nanoparticles (NPs) and silver nanowires by photosensitized reduction. In a first approach, direct photogeneration of silver NPs at the end of an optical fiber was carried out. Control of both size and density of silver NPs was possible by changing the photonic conditions. In a further development, a photochemically assisted procedure allowing silver to be deposited at the surface of a polymer microtip was implemented. Finally, polymer tips terminated by silver nanowires were fabricated by simultaneous photopolymerization and silver photoreduction. The silver NPs were characterized by UV-visible spectroscopy and scanning electron microscopy.

Features of anosmia in COVID-19.

BACKGROUND: Medical publications about anosmia with COVID-19 are scarce. We aimed to describe the prevalence and features of anosmia in COVID-19 patients. METHODS: We retrospectively included COVID-19 patients with anosmia between March 1st and March 17th, 2020. We used SARS-CoV-2 real time PCR in respiratory samples to confirm the cases. RESULTS: Fifty-four of 114 patients (47%) with confirmed COVID-19 reported anosmia. Mean age of the 54 patients was 47 (±16) years; 67% were females and 37% were hospitalised. The median Charlson comorbidity index was 0.70 (±1.6 [0-7]). Forty-six patients (85%) had dysgeusia and 28% presented with pneumonia. Anosmia began 4.4 (±1.9 [1-8]) days after infection onset. The mean duration of anosmia was 8.9 (±6.3 [1-21]) days and 98% of patients recovered within 28 days. CONCLUSIONS: Anosmia was present in half of our European COVID-19 patients and was often associated with dysgeusia.

Tocilizumab therapy reduced intensive care unit admissions and/or mortality in COVID-19 patients.

INTRODUCTION: No therapy has yet proven effective in COVID-19. Tocilizumab (TCZ) in patients with severe COVID-19 could be an effective treatment. METHOD: We conducted a retrospective case-control study in the Nord Franche-Comté Hospital, France. We compared the outcome of patients treated with TCZ and patients without TCZ considering a combined primary endpoint: death and/or ICU admissions. RESULTS: Patients with TCZ (n=20) had a higher Charlson comorbidity index (5.3 [±2.4] vs 3.4 [±2.6], P=0.014), presented with more severe forms (higher level of oxygen therapy at 13L/min vs 6L/min, P<0.001), and had poorer biological findings (severe lymphopenia: 676/mm3 vs 914/mm3, P=0.037 and higher CRP level: 158mg/L vs 105mg/L, P=0.017) than patients without TCZ (n=25). However, death and/or ICU admissions were higher in patients without TCZ than in the TCZ group (72% vs 25%, P=0.002). CONCLUSION: Despite the small sample size and retrospective nature of the work, this result strongly suggests that TCZ may reduce the number of ICU admissions and/or mortality in patients with severe SARS-CoV-2 pneumonia.

Enhanced light coupling in sub-wavelength single-mode silicon on insulator waveguides.

We report on NIR efficient end-coupling in single-mode silicon on insulator waveguides. Efficient coupling has been achieved using Polymer-Tipped Optical Fibers (PTOF) of adaptable radius of curvature (ROC). When compared with commercial micro lenses, systematic studies as a function of PTOF ROC, lead for subwavelength PTOF to a coupling factor enhancement as high as 2.5. This experimental behavior is clearly corroborated by radial FDTD simulations and an absolute coupling efficiency of about 50% is also estimated.

Understanding near/far-field engineering of optical dimer antennas through geometry modification.

Numerical investigations based on the boundary element method (BEM) have been carried out to two-dimensional (2-D) silver dimer nano-antennas of various geometries. The near-field and far-field properties are mainly determined by the local geometry at the gap and the global shape of the antenna shafts respectively. A hybrid dimer antenna, which mixes the geometry ingredients of the rod dimer and the bowtie, benefits in both near and far field. Using a microcavity representation, the resonance in dimer nano-antennas is explained in a common and semi-analytical manner. The plasmonic enhancement and the wavelength mismatching in the optical dimer antenna are naturally embodied in this model. The quality factor of the resonance, which can be influenced by the wavelength and the geometry, is discussed intuitively. The understanding presented in this work could guide the future engineering of the optical dimer antenna.

Self-assembly drives quantum dot photoluminescence.

Engineering the spectral properties of quantum dots can be achieved by a control of the quantum dots organization on a substrate. Indeed, many applications of quantum dots as LEDs are based on the realization of a 3D architecture of quantum dots. In this contribution, we present a systematic study of the quantum dot organization obtained on different chemically modified substrates. By varying the chemical affinity between the quantum dots and the substrate, the quantum dot organization is strongly modified from the 2D monolayer to the 3D aggregates. Then the photoluminescence of the different obtained samples has been systematically studied and correlated with the quantum dot film organization. We clearly show that the interaction between the substrate and the quantum dot must be stronger than the quantum dot-quantum dot interaction to avoid 3D aggregation and that these organization strongly modified the photoluminescence of the film rather than intrinsic changes of the quantum dot induced by pure surface chemistry.

Controlling the plasmon resonance of single metal nanoparticles by near-field anisotropic nanoscale photopolymerization.

We propose a new approach for tuning the Surface Plasmon (SP) resonance wavelength using hybrid nanoparticles. Our approach is based on nanoscale photopolymerization around metal nanoparticles. The enhanced optical near-field of silver nanoparticles triggers local photopolymerization. As a result, atomic force microscopy reveals two nanoscale polymerized lobes around nanoparticles, with a controlled effective index distribution. A spectral breaking degeneracy of surface plasmon resonance of the nanoparticles has been demonstrated by polarized extinction spectroscopy.

Near-field investigation of porous silicon photoluminescence modification after oxidation in water.

We report on local photo-induced oxidation of porous silicon in water at room temperature. Starting from a nonluminescent sample, the oxidation process induces luminescence which was found to first increase and then decrease as a function of the oxidation time. A clear blue shift is also observed. This effect is believed to be owing to size modification of silicon nanocrystallites and thus is explained in terms of quantum confinement. Optical near-field images and spectrum are used to monitor the photoluminescence modifications after oxidation. As the photoluminescence can be widely tuned in wavelength and intensity, this method offers a way to pattern the emission properties of the sample.

Detection in near-field domain of biomolecules adsorbed on a single metallic nanoparticle.

In this paper, we study the performances of nanosensors based on Localized Surface Plasmon Resonance in the context of biological sensing. We demonstrate the sensitivity and the selectivity of our designed nanosensors by studying the influence of the concentration of Streptavidin on the shift of Localized Surface Plasmon Resonance wavelength. In addition, to study the detection of biomolecules on a single Au nanoparticle, we used a Scanning Near-field Optical Microscope. These results represent new steps for applications in biological research and medical diagnostics.

Field localization and enhanced Second-Harmonic Generation in silicon-based microcavities.

High-quality amorphous Silicon Nitride (a-Si(1-x)N(x):H) Fabry-Pérot microcavities can show resonant surface Second Harmonic Generation (SHG) effect. We consider two different layouts of planar microcavities with almost identical linear reflectance and show how the structure geometry can strongly affect SHG yield. In particular, a difference of more than one order of magnitude in the SHG intensity is observed when the fundamental beam is tuned at the cavity resonance frequency. We explain this finding on the basis of a theoretical model taking into account the spatial distribution of the electric fields of the pump and harmonic frequencies inside the structure. A satisfactory matching of experimental data with the theoretical model is obtained by considering the source of second-order nonlinearity as limited to surface contributions.

Near-field reflection backscattering apertureless optical microscopy: application to spectroscopy experiments on opaque samples, comparison between lock-in and digital photon counting detection techniques.

An apertureless scanning near-field optical microscope (ASNOM) in reflection backscattering configuration is designed to conduct spectroscopic experiments on opaque samples constituted of latex beads. The ASNOM proposed takes advantage of the depth-discrimination properties of confocal microscopes to efficiently extract the near-field optical signal. Given their importance in a spectroscopic experiment, we systematically compare the lock-in and synchronous photon counting detection methods. Some results of Rayleigh's scattering in the near field of the test samples are used to illustrate the possibilities of this technique for reflection backscattering spectroscopy.