Development of an ID-LC-MS/MS method using targeted proteomics for quantifying cardiac troponin I in human serum.

BACKGROUND: Cardiac troponin is a complex protein consisting of the three subunits I, T and C located in heart muscle cells. When the heart muscle is damaged, it is released into the blood and can be detected. Cardiac troponin I (cTnI) is considered the most reliable and widely accepted test for detecting and confirming acute myocardial infarction. However, there is no current standardization between the commercial assays for cTnI quantification. Our work aims to create a measurement procedure that is traceable to the International System of Units for accurately measuring cardiac cTnI levels in serum samples from patients. METHODS: The workflow begins with immobilizing anti-cTnI antibodies onto magnetic nanoparticles to form complexes. These complexes are used to isolate cTnI from serum. Next, trypsin is used to enzymatically digest the isolated cTnI. Finally, the measurement of multiple cTnI peptides is done simultaneously using isotope dilution liquid chromatography-tandem mass spectrometry (ID-LC-MS/MS). RESULTS: The maximum antibody immobilization was achieved by combining 1 mg of nanoparticles with 100 µg of antibody, resulting in an average of 59.2 ± 5.7 µg/mg of immobilized antibody. Subsequently, the anti-cTnI-magnetic nanoparticle complex was utilized to develop and validate a method for quantifying cTnI in human serum using ID-LC-MS/MS and a protein calibration approach. The analytical method was assessed regarding linearity and recovery. The developed method enables the quantification of cTnI from 0.7 to 24 µg/L (R > 0.996). The limit of quantification was 1.8 µg/L and the limit of detection was 0.6 µg/L. Intermediate precision was ≤ 9.6% and repeatability was 2.0-8.7% for all quality control materials. The accuracy of the analyzed quality control materials was between 90 and 110%. Total measurement uncertainties for target value assignment (n = 6) were found to be ≤ 12.5% for all levels. CONCLUSIONS: The analytical method demonstrated high analytical performance in accurately quantifying cardiac troponin I levels in human serum. The proposed analytical method has the potential to facilitate the harmonization of cTnI results between clinical laboratories, assign target values to secondary certified reference materials and support reliable measurement of cTnI.

Recombinant production and characterization of a novel esterase from a hypersaline lake, Acigöl, by metagenomic approach.

The aim of this study was to isolate a novel esterase from a hypersaline lake by sequence-based metagenomics. The metagenomic DNA was isolated from the enriched hypersaline lake sediment. Degenerate primers targeting the conserved regions of lipolytic enzymes of halophilic microorganisms were used for polymerase chain reaction (PCR) and a whole gene was identified by genome walking. The gene was composed of 783 bp, which corresponds to 260 amino acids with a molecular weight of 28.2 kDa. The deduced amino acid sequence best matched with the esterase from Halomonas gudaonensis with an identity of 91%. Recombinantly expressed enzyme exhibited maximum activity towards pNP-hexanoate with a kcat value of 12.30 s-1. The optimum pH and temperature of the enzyme were found as 9 and 30 °C, respectively. The effects of NaCl, solvents, metal ions, detergents and enzyme inhibitors were also studied. In conclusion, a novel enzyme, named as hypersaline lake "Acigöl" esterase (hAGEst), was identified by sequence-based metagenomics. The high expression level, the ability to maintain activity at cold temperatures and tolerance to DMSO and metal ions are the most outstanding properties of the hAGEst.

Revealing the role of the X25 domains through the characterization of truncated variants of amylopullulanase enzyme from Thermoanaerobacter brockii brockii.

To understand the role of the X25 domains of the amylopullulanase enzyme from Thermoanaerobacter brockii brockii (T. brockii brockii), four truncated variants that are TbbApuΔX25-1-SH3 (S130-A1484), TbbApuΔX25-2-SH3 (T235-A1484), TbbApuΔX25-1-CBM20 (S130-P1254), and TbbApuΔX25-2-CBM20 (T235-P1254) were constructed, expressed and characterized together with the SH3 and CBM20 domain truncated variants (TbbApuΔSH3 (V1-A1484) and TbbApuΔCBM20 (V1-P1254). TbbApuΔSH3 showed improved affinity and specificity for both pullulan and soluble starch than full-length TbbApu with lower Km and higher kcat/Km values. It indicates that SH3 is a disposable domain without any effect on the activity and stability of the enzyme. However, TbbApuΔX25-1-SH3, TbbApuΔX25-2-SH3, TbbApuΔX25-1-CBM20, TbbApuΔX25-2-CBM20 (T235-P1254) and TbbApuΔCBM20 showed higher Km and lower kcat/Km values than TbbApuΔSH3 to both soluble starch and pullulan. It specifies that the X25 domains and CBM20 play an important role in both α-amylase and pullulanase activity. Also, it is revealed that while truncation of the CBM20 domain as starch binding domain (SBD) did not affect on raw starch binding ability of the enzyme, truncation of both X25 domains caused almost complete loss of the raw starch binding ability of the enzyme. All these results enlightened the function of the X25 domains that play a more crucial role than CBM20 in the enzyme's binding to raw starch and also play a crucial role in its activity.

Cloning and characterization of thermostable amylopullulanase TbbApu and its C-terminal truncated variants with enhanced activity in organic solvents.

Bifunctional debranching-enzyme amylopullulanases belong to the glycoside hydrolases (GHs) family and catalyze both the hydrolysis of α-1,4 and α-1,6 glycosidic bonds in starch, pullulan, amylopectin and glycogen polysaccharides. Among these, especially thermostable ones are essential in starch processing applications. In this study, we focused to elucidate the complete sequence of the apu gene and the role of C-term domains on biochemical properties and enzyme activity of Thermoanaerobacter brockii brockii amylopullulanase (TbbApu). After the gene sequence was defined, C- term truncated variants were constructed. The most suitable host organism and expression vector were determined as E. coli BL21(DE3) and pET-28a(+) depending on the highest yield/biomass ratio for recombinant production of all constructs. It was seen that the expression yield increased approximately threefold in the case of the SH3 region truncation. In the biochemical characterization, TbbApu and its truncated variants exhibited maximum activity at 70 °C and 75 °C for pullulan and starch hydrolysis respectively, and the optimum pH of TbbApu were 6.5 and 6 for truncated variants. Moreover, hydrolysis activities of all recombinant enzymes were enhanced by Mn2+, Co2+ and Cu2+, detergents, and almost all organic solvents; except butanol, DMF and DMSO. All recombinant amylopullulanases remained 80% stable up to 80 °C in the wide range of pH and also retained > 85% stability in the presence of defined volatile organic solvents. No significant difference was observed between the raw starch adsorption capacity and the specific activity of the three variants. These results indicated that the C-terminal regions of TbbApu are non-essential for the enzyme activity, stability and substrate binding capacity; furthermore, hexane and acetone organic solvents enhanced both pullulanase and α-amylase activity of these enzymes, interestingly. With these features, TbbApu and its truncated variants are distinguished from other thermophilic amylopullulanases and also make them promising candidates for industrial use.

Improved Candida methylica formate dehydrogenase fermentation through statistical optimization of low-cost culture media.

NAD⁺-dependent formate dehydrogenase (FDH, EC 1.2.1.2) is of use in the regeneration of NAD(P)H coenzymes, and therefore has strong potential for practical application in chemical and medical industries. A low-cost production of recombinant Escherichia coli (E. coli) containing FDH from Candida methylica (cmFDH) was optimized in molasses-based medium by using response surface methodology (RSM) based on central composite design (CCD). The beet molasses as a sole carbon source, (NH4)2HPO4 as a nitrogen and phosphorus source, KH2PO4 as a buffer agent, and Mg2SO4 · 7H2O as a magnesium and sulfur source were used as variables in the medium. The optimum medium composition was found to be 34.694 g L⁻¹ of reducing sugar (equivalent to molasses solution), 8.536 g L⁻¹ of (NH4)2HPO4, 3.073 g L⁻¹ of KH2PO4, and 1.707 g L⁻¹ of Mg2SO4 · 7H2O. Molasses-based culture medium increased the yield of cmFDH about three times compared to LB medium. The currently developed media has the potential to be used in industrial bioprocesses with low-cost production.

Bacterial community composition of sediments from artificial Lake Maslak, Istanbul, Turkey.

Small artificial lakes are ubiquitous in various natural environments. Small impoundments increase the residence time of water, thereby increasing the potential for retention of nutrients through biological and physical processes. We examined bacterial community structure of Lake Maslak, a small freshwater impoundment located in a densely populated region. The objective of our study was to investigate bacterial communities of the lake sediment which has not been determined and to elucidate the factors controlling bacterial diversity and the biogeochemical processes within the lake. For these purposes, surface water, lake bed sediments, and one core sample were collected. Microbiological characteristic of the lake bed and core sediments was determined by denaturing gradient gel electrophoresis targeting the 16S rRNA gene. Along with the microbiological studies, physicochemical (O(2), pH, temperature) and geochemical properties of the surface (NO (3) (-) , NO (2) (-) , NH (4) (+) ,PO (4) (-) ,SO (4) (2-) , K(+), Mg(2+), Ca(2+)) and pore water (K(+), Mg(2+), Ca(2+)) were determined in addition to heavy metals contents (Co Cu, Fe, Zn, Pb, Cd). Eight lake bed and one core sediments were also collected and analyzed for heavy metals and elemental compositions. Nitrate concentration in the surface water ranges from 0.27-1.8 mg/L, and ammonium (0.0-0.83 mg/L) appears to follow nitrate concentration. Sulfate concentration in the surface water (mean 60 mg/L) is greater than those measured in the pore water (mean, 37.5 mg/L). Fe, Zn, Pb, and Cd were not determined in the surface water, whereas Co was significantly higher both in the surface and pore water. Unlike Co, Pb, Zn, and Cd were not measured in the pore water. Lakebed and core sediments show significant enrichment in Pb, Zn, and Cu, indicating anthropogenic pollution. Consistent with geochemical parameters, microbiological analysis suggests a diverse bacterial community in the lake sediments and influence of anthropogenic pollution (e.g., atmospheric emission) on bacterial community.

Thermal Proteome Profiling and Meltome Analysis of a Thermophilic Bacterial Strain, Geobacillus thermoleovorans ARTRW1: Toward Industrial Applications.

Thermophilic microorganisms that thrive in extreme environments are of great importance because they express heat-resistant enzymes with the potential to serve as biocatalysts in industrial applications. Thermal proteome profiling (TPP) is a multiplexed quantitative mass spectrometry method for analyses of structural information and melting behavior of thousands of proteins, simultaneously determining the thermal denaturation profiles of each protein. We report, in this study, TPP applied to a thermophilic bacterial proteome, a recently isolated strain of Geobacillus thermoleovorans named as ARTRW1. The proteome was investigated in terms of thermostable enzymes that are relevant to industrial applications. In this study, we present the thermostability profiles of its 868 proteins. The majority of G. thermoleovorans proteome was observed to melt between 62.5°C and 72°C, with melting point (Tm) mean value of 68.1°C ± 6.6°C. Unfolding characteristics of several enzymes, including amylase, protease, and lipase, were demonstrated which are highly informative in terms of their applicability to specific industrial processes. A significant correlation was observed between protein melting temperature and the structural features such as molecular weight and abundance, whereas correlations were modest or weak in relation to the α-helix structure percentages. Taken together, we demonstrated a system-wide melting profile analysis of a thermal proteome and listed proteins with elevated Tm values that are highly promising for applications in medicine, food engineering, and cosmetics in particular. The extracted Tm values were found similar to those obtained by biophysical methods applied to purified proteins. TPP analysis has significant industrial and biomedical potentials to accelerate thermophilic enzyme research and innovation.

Whole-Genome Sequence of Geobacillus thermoleovorans ARTRW1, Isolated from Armutlu Geothermal Spring, Turkey.

The thermophilic microorganism Geobacillus thermoleovorans ARTRW1 was isolated from water samples collected in the Armutlu hot spring in Turkey. Here, the whole-genome sequence and its annotations are reported.

Attempting to remove the substrate inhibition of L-lactate dehydrogenase from Bacillus stearothermophilus by site-directed mutagenesis.

L-lactate dehydrogenase (LDH) catalyzes the interconversion of an oxoacid (pyruvate) and hydroxy-acid (lactate) using the NADH/NAD+ pair as a redox cofactor. The enzyme has a commercial significance, as it can be used to produce chiral building blocks for the synthesis of key pharmaceuticals and agrochemicals. However, the substrate inhibition which is due to an abortive NAD+-pyruvate complex reducing the steady state concentration of functional LDH limits its use in industry. This substrate inhibition can be overcome by weaking the binding of NAD+. The conserved aspartic acid residue at position 38 was replaced by the longer basic arginine side chain (D38R) using PCR based overlap extension mutagenesis technique in the hope of weakening NAD+-binding. The mutant gene was overexpressed in the Escherichia coli high-expression vector pKK223-3 in JM105 cells; then, the mutant protein was produced. Comparing the effect of substrate inhibition in the arginine-38 mutant with wild-type, substrate inhibition is decreased threefold.

Semi-Rational Design of Geobacillus stearothermophilus L-Lactate Dehydrogenase to Access Various Chiral α-Hydroxy Acids.

Chiral α-hydroxy acids (AHAs) are rapidly becoming important synthetic building blocks, in particular for the production of pharmaceuticals and other fine chemicals. Chiral compounds of a variety of functionalities are now often derived using enzymes, and L-lactate dehydrogenase from the thermophilic organism Geobacillus stearothermophilus (bsLDH) has the potential to be employed for the industrial synthesis of chiral α-hydroxy acids. Despite the thorough characterization of this enzyme, generation of variants with high activity on non-natural substrates has remained difficult and therefore limits the use of bsLDH in industry. Here, we present the engineering of bsLDH using semi-rational design as a method of focusing screening in a small and smart library for novel biocatalysts. In this study, six mutant libraries were designed in an effort to expand the substrate range of bsLDH. The eight variants identified as having enhanced activity toward the selected α-keto acids belonged to the same library, which targeted two positions simultaneously. These new variants now may be useful biocatalysts for chiral synthesis of α-hydroxy acids.

Characteristics of multi-layer coating formed on commercially pure titanium for biomedical applications.

An innovative multi-layer coating comprising a bioactive compound layer (consisting of hydroxyapatite and calcium titanate) with an underlying titanium oxide layer (in the form of anatase and rutile) has been developed on Grade 4 quality commercially pure titanium via a single step micro-arc oxidation process. Deposition of a multi-layer coating on titanium enhanced the bioactivity, while providing antibacterial characteristics as compared its untreated state. Furthermore, introduction of silver (4.6wt.%) into the multi-layer coating during micro-arc oxidation process imposed superior antibacterial efficiency without sacrificing the bioactivity.

A double mutant of highly purified Geobacillus stearothermophilus lactate dehydrogenase recognises l-mandelic acid as a substrate.

Lactate dehydrogenase from the thermophilic organism Geobacillus stearothermophilus (formerly Bacillus stearothermophilus) (bsLDH) has a crucial role in producing chirally pure hydroxyl compounds. α-Hydroxy acids are used in many industrial situations, ranging from pharmaceutical to cosmetic dermatology products. One drawback of this enzyme is its limited substrate specificity. For instance, l-lactate dehydrogenase exhibits no detectable activity towards the large side chain of 2-hydroxy acid l-mandelic acid, an α-hydroxy acid with anti-bacterial activity. Despite many attempts to engineer bsLDH to accept α-hydroxy acid substrates, there have been no attempts to introduce the industrially important l-mandelic acid to bsLDH. Herein, we describe attempts to change the reactivity of bsLDH towards l-mandelic acid. Using the Insight II molecular modelling programme (except 'program' in computers) and protein engineering techniques, we have successfully introduced substantial mandelate dehydrogenase activity to the enzyme. Energy minimisation modelling studies suggested that two mutations, T246G and I240A, would allow the enzyme to utilise l-mandelic acid as a substrate. Genes encoding for the wild-type and mutant enzymes were constructed, and the resulting bsLDH proteins were overexpressed in Escherichia coli and purified using the TAGZyme system. Enzyme assays showed that insertion of this double mutation into highly purified bsLDH switched the substrate specificity from lactate to l-mandelic acid.

Kinetic and thermodynamic properties of the folding and assembly of formate dehydrogenase.

The folding mechanism and stability of dimeric formate dehydrogenase from Candida methylica was analysed by exposure to denaturing agents and to heat. Equilibrium denaturation data yielded a dissociation constant of about 10(-13)M for assembly of the protein from unfolded chains and the kinetics of refolding and unfolding revealed that the overall process comprises two steps. In the first step a marginally stable folded monomeric state is formed at a rate (k(1)) of about 2x10(-3)s(-1) (by deduction k(-1) is about 10(-4)s(-1)) and assembles into the active dimeric state with a bimolecular rate constant (k(2)) of about 2x10(4)M(-1)s(-1). The rate of dissociation of the dimeric state in physiological conditions is extremely slow (k(-2) approximately 3x10(-7)s(-1)).

Improving the purification of NAD+-dependent formate dehydrogenase from Candida methylica.

The Candida methylica (cm) recombinant wild type formate dehydrogenase (FDH) gene has been cloned into the pQE-2 TAGZyme expression vector and the 6xHis-tagged FDH gene has been overexpressed in JM105 cells to purify the FDH protein more efficiently, by the use of exopeptidases, TAGZyme Purification System, which has allowed the complete removal of the small N-terminal His-tag. After the purification procedure, 1.2 mg/mL cmFDH protein of >95% purity was obtained. The kinetic parameters of cmFDH have been determined by observing the oxidation of the nicotinamide coenzyme at 340 nm. The results have also been compared to the yield of standard vs. affinity purification of FDH.

Effects of disulphide bridges on the activity and stability of the formate dehydrogenase from Candida methylica.

Wild-type cmFDH contains no cystines, hence it is a good candidate to test the hypothesis that thermostability can be achieved by introducing new disulphide bridges. Three cysteine double mutants of cmFDH were designed, using a homology model reported previously, to introduce cystine bridges in the C-domain (T169C-T226C) in the N-domain (V88C-V112C) and between the two monomers (M156C-L159C) to form two cystine bridges across the dimer interface. These mutants were constructed and the proteins were over-expressed in E. coli. The mutants V88C-V112C and M156C-L159C lost FDH activity. The mutant T169C-T226C was both less active and less thermostable than wild-type FDH.

Estimating the energetic contribution of hydrogen bonding to the stability of Candida methylica formate dehydrogenase by using double mutant cycle.

An homology model of Candida methylica formate dehydrogenase (cm FDH) was constructed based on the Pseudomonas sp. 101 formate dehydrogenase (ps FDH) structure. In wild type cm FDH, Thr169 and Thr226 can form hydrogen bonds with each other. We measured the interaction energy between the two threonines independent of other interactions in the proteins by using a so-called double mutant cycle and assessing the protein stability from the concentration of guanidine hydrochloride needed to denature 50% of the molecules. We conclude that the hydrogen bonds stabilize the wild type protein by -4 kcal mol(-1).