Antiferromagnetism in GaS monolayer doped with TM-TM atom pairs (TM = V, Cr, Mn, and Fe).

In this work, structural modification at Ga sites of the gallium sulfide (GaS) monolayer is explored to create new two-dimensional (2D) materials towards spintronic applications. GaS monolayer is a non-magnetic indirect-gap semiconductor material with an energy gap of 2.38 (3.27) eV as calculated using the PBE(HSE06) functional. Half-metallicity is induced in this 2D material by creating a single Ga vacancy, where S atoms around the defect site produce mainly the magnetic properties with a total magnetic moment of 1.00µB. In contrast, the non-magnetic nature is preserved under the effects of a pair of Ga vacancies, which metallize the monolayer. V, Mn, and Fe doping leads to the emergence of the diluted magnetic semiconductor nature, while doping with Cr creates a new 2D half-metallic material from the GaS monolayer. In these cases, total magnetic moments between 2.00 and 5.00µB are obtained and the 3d orbital of transition metal (TM) impurities mainly induces the system magnetism. In addition, the effects of doping with a pair of TM (pTM) atoms are also investigated, in which the antiferromagnetism is found to be stable rather than the ferromagnetism to follow the Pauli exclusion principle. Significant magnetization of the GaS monolayer is also achieved with zero total magnetic moment because of the structural mirror-symmetry. pV-, pMn-, and pFe-doped systems are antiferromagnetic semiconductor materials with energy gaps of 1.06, 1.90, and 1.84 eV, respectively. Meanwhile, the monolayer is metallized by doping with a pCr pair. The results presented herein indicate that the defective and doped GaS monolayers are prospective 2D candidates for spintronic applications - which are hindered for the pristine GaS monolayer because of the absence of intrinsic magnetism.

A systematic investigation of chromium and vanadium impurities in a Janus Ga2SO monolayer towards spintronic applications.

Transition metals (TMs) have been employed as efficient sources of magnetism in non-magnetic two-dimensional (2D) materials. In this work, doping with chromium (Cr) and vanadium (V) is proposed to induce feature-rich electronic and magnetic properties in a Janus Ga2SO monolayer towards spintronic applications. The Ga2SO monolayer is a 2D semiconductor material with an energy gap of 1.30 (2.12) eV obtained from PBE(HSE06)-based calculations. Considering the structural asymmetry, different vacancy and doping sites are considered. A single Ga vacancy and pair of Ga vacancies magnetize the monolayer with total magnetic moments between 0.69 and 3.13µB, where the half-metallic nature is induced by the single Ga1 vacancy (that bound to the S atom). In these cases, the magnetism is originated mainly from S and O atoms closest to the vacancy sites. Depending on the doping site, either half-metallicity or diluted magnetic semiconductor natures are obtained by doping with Cr and V atoms with total magnetic moments of 3.00 and 2.00µB, respectively. Herein, 3d TM impurities produce mainly the system magnetism. When substituting a pair of Ga atoms, TM atoms exhibit the antiparallel spin alignment to follow the Pauli exclusion principle, retaining the novel electronic characteristics induced by a single TM dopant. Except for the case of doping with a pair of V atoms, total magnetic moments of 2.00 and 1.00µB are obtained by doping with a pair or Cr atoms and Cr/V co-doping, respectively. The non-zero magnetic moment is derived from the different interactions of each TM atom with its neighboring atoms, which will also be studied by Bader charge analysis. Our results introduce new promising 2D spintronic candidates, which are made by structural modifications at Ga sites of a non-magnetic Janus Ga2SO monolayer.

Rich essential properties of silicon-substituted graphene nanoribbons: a comprehensive computational study.

The diverse structural, electronic, and magnetic properties of silicon (Si)-substituted armchair and zigzag graphene nanoribbons (AGNRs and ZGNRs) were investigated using spin-polarized density functional theory (DFT) calculations. Pristine AGNRs belong to a nonmagnetic semiconductor with a direct bandgap of 1.63/1.92 eV determined by PBE/HSE06 functionals. Under various Si substitutions, nonmagnetic bandgaps were tuned at 1.49/1.87, 1.06/1.84, 0.81/1.45, 1.04/1.71, 0.89/1.05, and 2.38/3.0 eV (PBE/HSE06) in the single Si edge-, single Si non-edge-, double Si ortho-, double Si meta-, double Si para-, and 100% Si-substituted AGNR configurations, respectively. Meanwhile, pristine ZGNRs displayed antiferromagnetic semiconducting behavior with a spin degenerate bandgap of 0.52/0.81 eV (PBE/HSE06) and becomes a ferromagnetic semimetal in the single Si configurations or an unusual ferromagnetic semiconductor in the 100% Si configuration. Under the developed first-principles theoretical framework, the formation of quasi π (C-2pz and Si-3pz) and quasi σ (C-2s, -2pxy and Si-3s and -3pxy) bands was identified in the Si-substituted configurations. These quasi π and quasi σ bands showed weak separation, resulting in weak quasi sp2 hybridization in Si-C bonds, in which the identified hybridization mechanism was a strong evidence for the formation of stable planar 1D structures in the Si-substituted configurations. Our complete revelation of the essential properties of Si-substituted GNRs can provide a complete understanding of their chemically doped 1D materials for various practical applications.

Introducing the 1H-Na2S monolayer as a new direct gap semiconductor with feature-rich electronic and magnetic properties.

In this work, a new direct gap semiconductor, the Na2S monolayer in the 1H-phase, with good stability and ionic character, has been explored using first-principles calculations. A Γ-Γ energy gap of 0.80 (1.48) eV is obtained using the standard PBE (hybrid HSE06) functional. The studied two-dimensional (2D) material possesses weak dynamical stability under compressive strain due to the sensitivity of the ZA mode. Meanwhile tensile strain has much more positive effects, where the stability is well retained up to a strain strength of 7%. Once external strain is applied, the band gap increases due to switching from lattice compression to lattice tension. Further exploration of defect engineering indicates that significant magnetism with magnetic moment of ±1 is induced by a single Na vacancy. The magnetic properties are mainly produced by S atoms around the defect site. In contrast, the paramagnetic nature is preserved with a single S vacancy. However, large energy gap reduction of up to 93.75% can be achieved with a defect concentration of 25%. This research introduces a new prospective 2D material similar to transition metal dichalcogenides for optoelectronic and spintronic applications, contributing to the continued efforts to develop novel multifunctional low-dimensional materials.

Fundamental Properties of Transition-Metals-Adsorbed Graphene.

The revealing properties of transition metal (T)-doped graphene systems are investigated with the use of the first-principles method. The detailed calculations cover the bond length, position and height of adatoms, binding energy, atom-dominated band structure, adatom-induced free carrier density as well as energy gap, spin-density distributions, spatial charge distribution, and atom-, orbital- and spin-projected density-of-states (DOS). The magnetic configurations are clearly identified from the total magnetic moments, spin-split energy bands, spin-density distributions and spin-decomposed DOS. Moreover, the single- or multi-orbital hybridizations in T-C, T-T, and C-C bonds can be accurately deduced from the careful analyses of the above-mentioned physical quantities. They are responsible for the optimal geometric structure, the unusual electronic properties, as well as the diverse magnetic properties. All the doped systems are metals except for the low-concentration Ni-doped ones with semiconducting behavior. In contrast, ferromagnetism is exhibited in various Fe/Co-concentrations but only under high Ni-concentrations. Our theoretical predictions are compared with available experimental data, and potential applications are also discussed.

Fluorination-enriched electronic and magnetic properties in graphene nanoribbons.

The feature-rich electronic and magnetic properties of fluorine-doped graphene nanoribbons are investigated by the first-principles calculations. They arise from the cooperative or competitive relations among the significant chemical bonds, finite-size quantum confinement and edge structure. There exist C-C, C-F, and F-F bonds with multi-orbital hybridizations. Fluorine adatoms can create p-type metals or concentration- and distribution-dependent semiconductors, depending on whether the π bonding is seriously suppressed by the top-site chemical bonding. Furthermore, five kinds of spin-dependent electronic and magnetic properties cover the non-magnetic and ferromagnetic metals, non-magnetic semiconductors, and anti-ferromagnetic semiconductors with/without spin splitting. The diverse essential properties are clearly revealed in the spatial charge distribution, spin density, and orbital-projected density of states.

Vacancy-and doping-mediated electronic and magnetic properties of PtSSe monolayer towards optoelectronic and spintronic applications.

Developing new multifunctional two-dimensional (2D) materials with two or more functions has been one of the main tasks of materials scientists. In this work, defect engineering is explored to functionalize PtSSe monolayer with feature-rich electronic and magnetic properties. Pristine monolayer is a non-magnetic semiconductor 2D material with a band gap of 1.52(2.31) eV obtained from PBE(HSE06)-based calculations. Upon creating single Pt vacancy, the half-metallic property is induced in PtSSe monolayer with a total magnetic moment of 4.00 µ B. Herein, magnetism is originated mainly from S and Se atoms around the defect site. In contrast, single S and Se vacancies preserve the non-magnetic nature. However, the band gap suffers of considerable reduction of the order of 67.11% and 48.68%, respectively. The half-metallicity emerges also upon doping with alkali metals (Li and Na) with total magnetic moment of 1.00 µ B, while alkaline earth impurities (Be and Mg) make new diluted magnetic semiconductor materials from PtSSe monolayer with total magnetic moment of 2.00 µ B. In these cases, magnetic properties are produced mainly by Se atoms closest to the doping site. In addition, doping with P and As atoms at chalcogen sites is also investigated. Except for the half-metallic AsSe system (As doping at Se site), the diluted magnetic semiconductor behavior is obtained in the remaining cases. Spin density results indicate key role of the VA-group impurities in magnetizing PtSSe monolayer. In these cases, total magnetic moments between 0.99 and 1.00 µ B are obtained. Further Bader charge analysis implies the charge loser role of all impurities that transfer charge to the host monolayer. Results presented in this work may suggest promises of the defected and doped Janus PtSSe structures for optoelectronic and spintronic applications.

Adsorption effects of acetone and acetonitrile on defected penta-PdSe2 nanoribbons: a DFT study.

Using DFT calculations, the structural and electronic properties of the ZZ7 p-PdSe2 nanoribbons (ZZ7) with the four kinds of vacancy defects, including ZZ7-VPd, ZZ7-VSe, ZZ7-VPd+Se, and ZZ7-V2Se are studied, in which their stability, diverse geometries, and altered electronic properties are determined through the formation energies, optimal structural parameters, electronic band structures, and DOSs. Specifically, the formation energies of all studied systems show significant negative values around -3.9 eV, evidencing their good thermal stability. The geometries of four defective structures exhibit different diversification, whereas only the ZZ7-V2Se structure possesses the highly enhanced feature, identified as the most effective substrate for the acetone and acetonitrile adsorption. On the electronic behaviors, the ZZ7 band structure displays the nonmagnetic metallic characteristics that become the ferromagnetic half-metallic band structures for the ZZ7-VPd and ZZ7-VSe and the ferromagnetic semi-metallic band structures for the ZZ7-VPd+Se and ZZ7-V2Se. For adsorption of the acetone and acetonitrile on the ZZ7-V2Se structure, the energetic stability, adsorption sites, adsorption distances, charge transfers, and electronic characteristics of the adsorbed systems are determined by the adsorption energies, optimal adsorption sites, adsorption distances, Mulliken populations, and DOSs. The adsorption energies of the acetone- and acetonitrile-adsorbed ZZ7-V2Se systems display significant values at -1.2 eV and -0.86 eV at the preferable sites of 8 and 11, respectively, indicating their great adsorption ability. The adsorption mechanism of the acetone- and acetonitrile-adsorbed systems belongs to the physisorption owing to absence of chemical bonds, in which the bond lengths of the ZZ7-V2Se substrate show a very small deviation. Under the acetone and acetonitrile adsorptions, the ferromagnetic semi-metallic DOSs of the ZZ7-V2Se become the ferromagnetic half-metallic DOSs for the ZZ7-V2Se-acetone-8 and the ferromagnetic semiconducting DOSs for the ZZ7-V2Se-acetonitrile-11. Our systematic results can provide a complete understanding of the acetone- and acetonitrile adsorptions on the potential ZZ7-V2Se structure, which is very useful for nanosensor application.

The continuous type of splenogonadal fusion: A rare case report and literature review.

INTRODUCTION: We report a rare case of the continuous type of splenogonadal fusion (SGF) in a young adolescent with preserved testis. CASE PRESENTATION: A 19-year-old male patient with a history of left inguinal hernia repair 10 years ago presented with a palpable mass on the left side. Computed tomography revealed a 58x37mm mass with a tissue density of 47HU, demonstrating vigorous enhancement following contrast administration and displaying well-defined margins with the left testicle. It was noted to be growing vertically in the left inguinal canal and to be continuous with the lower pole of the native spleen. The patient underwent laparoscopic surgery to remove the splenic tail in the abdomen and to separate the scrotal spleen from the left testicle through the left inguinal tract. The histopathological examination confirmed the presence of splenic tissue. DISCUSSION: SGF is often diagnosed incidentally during exploration or surgery for scrotal swelling or mass, cryptorchidism, or inguinal hernia in young patients. It is important to be aware of this condition to avoid unnecessary radical orchiectomy. CONCLUSION: Diagnosing the SGF preoperatively can be challenging. However, a combination of imaging modalities and negative tests for alpha-fetoprotein (AFP), lactate dehydrogenase (LDH), and beta-human chorionic gonadotropin (b-HCG) can aid in making an initial diagnosis. The use of laparoscopic surgery can further improve the diagnostic process, allowing clinicians to accurately diagnose SGF and make well-informed treatment decisions.

First-principles study of indium nitride monolayers doped with alkaline earth metals.

Element doping has been widely employed to modify the ground state properties of two-dimensional (2D) materials. In this work, the effects of doping with alkaline earth metals (AEMs) on the structural, electronic, and magnetic properties of indium nitride (InN) monolayers are investigated using first-principles calculations based on density functional theory. In a graphene-like honeycomb structure, the InN monolayer possesses good dynamical and thermal stability, and exhibits an indirect gap semiconductor character with a band gap of 0.37 (1.48) eV as determined by using the PBE(HSE06) functional. A single In vacancy leads to the emergence of a magnetic semiconductor character, where magnetic properties with a large total magnetic moment of 3.00 µB are produced mainly by the N atoms closest to the defect site. The incorporation of AEMs impurities causes local structural distortion due to the difference in atomic size, where Mg and Ca doping processes are energetically most favorable. Half-metallicity is induced by the partial occupancy of the N-2p orbital, which is a consequence of having one valence electron less. In these cases, the total magnetic moment of 1.00 µB mainly originates from N atoms neighboring the dopants. Further increasing the doping level preserves the half-metallic character, where N atoms play a key role on the magnetism of the highly doped systems. Results presented herein suggest the In replacement by AEMs impurities is an effective approach to make prospective spintronic 2D materials from InN monolayers.

Functionalization of an ionic honeycomb KF monolayer via doping.

Doping has been widely employed to functionalize two-dimensional (2D) materials because of its effectiveness and simplicity. In this work, the electronic and magnetic properties of pristine and doped KF monolayers are investigated using first-principles calculations based on density functional theory (DFT). Phonon dispersion curves and ab initio molecular dynamics (AIMD) snapshots indicate good stability of the pristine material. The band structure shows an insulating behavior of the KF monolayer, with indirect gaps of 4.80 (6.53) eV as determined using the PBE (HSE06) functional. Its ionic character is also confirmed by the valence charge distribution and Bader charge analysis, and is generated by charge transfer from the K-4s orbital to the F-2p orbital. Doping at both anion and cation sites is explored using N/O and Ca/Sr as dopants, respectively, due to their dissimilar valence electronic configuration in comparison with that of the host atoms. It is found that the KF monolayer is significantly magnetized, where total magnetic moments of 2.00 and 1.00 µB are obtained via N and O/Ca/Sr doping, respectively. Moreover, the appearance of new middle-gap energy states leads to the development of a magnetic semiconductor nature, which is regulated by N-2p, O-2p, Ca-3d, Ca-4s, Sr-4d, and Sr-5s orbitals. Further investigation of codoping indicates that a magnetic-semiconductor nature is preserved, where the synergistic effects of dopants play a key role in the electronic and magnetic properties of the codoped systems. The results presented herein introduce doping as an efficient approach to functionalize the ionic KF monolayer to obtain prospective d0 spintronic materials, a functionality that is not accounted for by the pristine monolayer.

Searching for d0 spintronic materials: bismuthene monolayer doped with IVA-group atoms.

Doping with non-metal atoms may endow two-dimensional (2D) materials with feature-rich electronic and magnetic properties to be applied in spintronic devices. In this work, the effects of IVA-group (C, Si, and Ge) atom doping on the structural, electronic and magnetic properties of bismuthene monolayer are investigated by means of first-principles calculations. Pristine monolayer is a direct gap semiconductor with band gap of 0.56 eV, exhibiting Rashba splitting caused by spin-orbit coupling. Regardless doping level, C and Si incorporation leads to the emergence of significant magnetism, which is generated mainly by the dopants as demonstrated by the spin density illustration. Depending on the dopant nature and concentration, either half-metallic or magnetic semiconductor characters can be induced by doping, which are suitable to generate spin current in spintronic devices. Further study indicates an energetically favorable antiferromagnetic coupling in the C- and Si-doped systems, suggesting the predominant Pauli repulsion over Coulomb repulsion. Meanwhile, bismuthene monolayer is metallized by doping Ge atoms. Magnetization occurs with 12.5% and 5.56% of Ge atoms, meanwhile the non-magnetic nature is preserved under lower doping level of 3.125%. Results presented herein may introduce C and Si doping as efficient approach to functionalize non-magnetic bismuthene monolayer, enriching the family of 2D d0 magnetic materials for spintronic applications.

First-principles study of SiC and GeC monolayers with adsorbed non-metal atoms.

Chemical adsorption of non-metal atoms may lead to the emergence of novel features in two-dimensional (2D) materials. In this work, the electronic and magnetic properties of graphene-like XC (X = Si and Ge) monolayers with adsorbed H, O, and F atoms are investigated using spin-polarized first-principles calculations. Deeply negative adsorption energies suggest strong chemical adsorption on XC monolayers. Despite the non-magnetic nature of both host monolayer and adatom, SiC is significantly magnetized by H adsorption inducing the magnetic semiconductor nature. Similar features are observed in GeC monolayers upon adsorbing H and F atoms. In all cases, an integer total magnetic moment of 1 µB is obtained, originating mainly from adatoms and their neighbor X and C atoms. In contrast, O adsorption preserves the non-magnetic nature of SiC and GeC monolayers. However, the electronic band gaps exhibit significant reduction of the order of 26% and 18.84%, respectively. These reductions are consequences of the middle-gap energy branch generated by the unoccupied O-pz state. The results introduce an efficient approach to develop d0 2D magnetic materials to be applied in spintronic devices, as well as to widen the working region of XC monolayers in optoelectronic applications.

Antiferromagnetic ordering in the TM-adsorbed AlN monolayer (TM = V and Cr).

In this work, the effects of transition metal (TM = V and Cr) adsorption on AlN monolayer electronic and magnetic properties are investigated using first-principles density functional theory (DFT) calculations. TMs prefer to be adsorbed on-top of a bridge position as indicated by the calculated adsorption energy. V adatoms induce half-metallicity, while Cr adatoms metallize the monolayer. The magnetic properties are produced mainly by the V and Cr adatoms with magnetic moments of 3.72 and 4.53 µ B, respectively. Further investigation indicates that antiferromagnetic (AFM) ordering is energetically more favorable than ferromagnetic (FM) ordering. In both cases, the AFM state is stabilized upon increasing adatom coverage. The AlN monolayer becomes an AFM semiconductor with 0.5 ML of V adatom, and metallic nature is induced with 1.0 ML. Meanwhile, the degree of metallicity increases with increasing Cr adatoms. Results reported herein may provide a feasible new approach to functionalize AlN monolayers for spintronic applications.

Exploring a silicene monolayer as a promising sensor platform to detect and capture NO and CO gas.

Searching for new two-dimensional (2D) materials for the early and efficient detection and capture of toxic gas has received special attention from researchers. In this work, we investigate the adsorption of NO and CO molecules onto a silicene monolayer using first-principles calculations. Different numbers of adsorbates, as well as adsorption configurations, have been considered. The results show that up to four NO molecules can be chemically adsorbed onto the pristine monolayer with adsorption energies varying between -0.32 and -1.22 eV per molecule. In these cases, the gas adsorption induces feature-rich electronic behaviors, including magnetic semiconducting and half-metallicity, where the magnetic properties are produced mainly by the adsorbates. Except for two CO molecules adsorbing onto two adjacent Si atoms with an adsorption energy of -0.26 eV per molecule, other adsorption configurations show weak physisorption of CO molecules onto the pristine silicene platform. However, the sensitivity can be enhanced considerably by doping with Al atoms, drastically reducing the adsorption energy to between -0.19 and -0.71 eV per molecule. The doping and adsorption process may lead to either band gap opening or metallization, depending on its configuration. This study reveals the promising applicability of pristine and Al doped silicene monolayers as sensors for more than one single NO and CO molecule.

A new family of NaTMGe (TM = 3d transition metals) half-Heusler compounds: the role of TM modification.

Exploring Heusler based materials for different practical applications has drawn more and more attention. In this work, the structural, electronic, magnetic, and mechanical properties of NaTMGe (TM = all 3d transition metals) half-Heusler compounds have been systematically investigated using first-principles calculations. The TM modification plays a determinant role in the fundamental properties. Except NaNiGe and NaCuGe, the studied materials exhibit good dynamical stability. Calculations reveal the non-magnetic semiconductor of NaScGe with a direct energy gap of 1.21 eV. Prospective spintronic applications of NaVGe and NaCrGe-NaMnGe are also suggested by their magnetic semiconductor and half-metallic behavior, respectively, where their magnetic properties follow the Slater-Pauling rule. Nevertheless, the remaining materials are either magnetic or non-magnetic metallic. For the magnetic systems, the magnetism is induced mainly by the TM constituents with either spin-up (V, Cr, Mn, and Fe) or spin-down (Co) 3d states. Calculated elastic constants indicate that all compounds are mechanically stable. Furthermore, they exhibit significant elastic anisotropy, where NaScGe and NaZnGe are the least and most anisotropic materials, respectively. Also, modifying the TM elements influences the materials' ductile and brittle behaviors. Our work unravels clearly the effects of TM modification on the fundamental properties of NaTMGe compounds. NaTMGe materials show excellent versatility with promising properties for optoelectronic and spintronic applications.

Tuning MoSO monolayer properties for optoelectronic and spintronic applications: effect of external strain, vacancies and doping.

Since the successful synthesis of the MoSSe monolayer, two-dimensional (2D) Janus materials have attracted huge attention from researchers. In this work, the MoSO monolayer with tunable electronic and magnetic properties is comprehensively investigated using first-principles calculations based on density functional theory (DFT). The pristine MoSO single layer is an indirect gap semiconductor with energy gap of 1.02(1.64) eV as predicted by the PBE(HSE06) functional. This gap feature can be efficiently modified by applying external strain presenting a decrease in its value upon switching the strain from compressive to tensile. In addition, the effects of vacancies and doping at Mo, S, and O sites on the electronic structure and magnetic properties are examined. Results reveal that Mo vacancies, and Al and Ga doping yield magnetic semiconductor 2D materials, where both spin states are semiconductors with significant spin-polarization at the vicinity of the Fermi level. In contrast, single S and O vacancies induce a considerable gap reduction of 52.89% and 58.78%, respectively. Doping the MoSO single layer with F and Cl at both S and O sites will form half-metallic 2D materials, whose band structures are generated by a metallic spin-up state and direct gap semiconductor spin-down state. Consequently, MoV, MoAl, MoGa, SF, SCl, OF, and OCl are magnetic systems, and the magnetism is produced mainly by the Mo transition metal that exhibits either ferromagnetic or antiferromagnetic coupling. Our work may suggest the MoSO Janus monolayer as a prospective candidate for optoelectronic applications, as well as proposing an efficient approach to functionalize it to be employed in optoelectronic and spintronic devices.

Nitrogen doping and oxygen vacancy effects on the fundamental properties of BeO monolayer: a DFT study.

In practice, modifying the fundamental properties of low-dimensional materials should be realized before incorporating them into nanoscale devices. In this paper, we systematically investigate the nitrogen (N) doping and oxygen vacancy (OV) effects on the electronic and magnetic properties of the beryllium oxide (BeO) monolayer using first-principles calculations. Pristine BeO single layer is a non-magnetic insulator with an indirectK-Γ gap of 5.300 eV. N doping induces a magnetic semiconductor nature, where the spin-up and spin-down band gaps depend on the dopant concentration and N-N separation. Creating one OV leads to the energy gap reduction of 31.06% with no spin-polarization, which is due to the abundant 2p electrons of the Be atoms nearest the OV site. The further increase to two OVs and varying the OV-OV distance affect the band gap values, however the spin independence is retained. The magnetic semiconducting behavior is also obtained by the simultaneous N doping and OV presence. Calculations reveal significant magnetization of the BeO@1N, BeO@2N-n, BeO@NOV-nsystems, which is produced mainly by the spin-up N-2p state. Except for the BeO@NOV-1 and BeO@NOV-2, whose magnetic properties are created by the spin-up 2p state of the Be atoms closest to the OV site. The variation of the N-N and N-OV distances keeps the ferromagnetic ordering in the BeO@2N and BeO@NOV layers. Results presented herein may propose efficient methods to artificially modify the physical properties of BeO monolayer, leading to the formation of novel two-dimensional (2D) materials for optoelectronic and spintronic applications.

Preclinical Immune Response and Safety Evaluation of the Protein Subunit Vaccine Nanocovax for COVID-19.

The coronavirus disease 2019 (COVID-19) pandemic caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has become a global health concern. The development of vaccines with high immunogenicity and safety is crucial for controlling the global COVID-19 pandemic and preventing further illness and fatalities. Here, we report the development of a SARS-CoV-2 vaccine candidate, Nanocovax, based on recombinant protein production of the extracellular (soluble) portion of the spike (S) protein of SARS-CoV-2. The results showed that Nanocovax induced high levels of S protein-specific IgG and neutralizing antibodies in three animal models: BALB/c mouse, Syrian hamster, and a non-human primate (Macaca leonina). In addition, a viral challenge study using the hamster model showed that Nanocovax protected the upper respiratory tract from SARS-CoV-2 infection. Nanocovax did not induce any adverse effects in mice (Mus musculus var. albino) and rats (Rattus norvegicus). These preclinical results indicate that Nanocovax is safe and effective.

Fundamental Properties of Metal-Adsorbed Silicene: A DFT Study.

Sodium, magnesium, and aluminum adatoms, which possess one, two, and three valence electrons, respectively, in terms of 3s, 3s2, and (3s2, 3p) orbitals, are very suitable for helping us understand adsorption-induced diverse phenomena. In this work, the revealing properties of metal (Na/Mg/Al)-adsorbed graphene systems are investigated by means of the first-principles method. The single- and double-sided chemisorption cases, the various adatom concentrations, the hollow/top/valley/bridge sites, and the buckled structures are taken into account. The hollow and valley adsorptions that correspond to the Na/Mg and Al cases, respectively, create extremely nonuniform environments. This leads to diverse orbital hybridizations in Na/Mg/Al-Si bonds, as indicated by the Na/Mg/Al-dominated bands, as well as the spatial charge density distributions and the orbital-projected density of states (DOS). Out of three types of metal-adatom adsorptions, the Al-adsorption configurations produce the strongest chemical modifications. The ferromagnetic configurations have been shown to survive only in specific Mg and Al adsorptions, but not in the Na cases. The presented theoretical predictions could be verified experimentally, and potential applications are discussed. Additionally, important similarities and differences with graphene-related systems are examined.