RESUMEN
Unsuspected thyroid cancer can be detected in multinodular goiter (MNG) where the risk of malignancy is 7-9%. Fine needle aspiration (FNAc) is performed in case of suspicious findings on ultrasound. With benign FNAC results there is no need for surgery unless the patient has pressure symptoms or cosmetic concerns, but the risk of overlooked malignancy is always present. We present the case of a patient with unexpected detection of papillary thyroid cancer on thyroid scan.
Asunto(s)
Bocio Nodular , Neoplasias de la Tiroides , Humanos , Tiroidectomía , Bocio Nodular/diagnóstico por imagen , Bocio Nodular/cirugía , Pertecnetato de Sodio Tc 99m , Estudios Retrospectivos , Neoplasias de la Tiroides/diagnóstico , Biopsia con Aguja FinaRESUMEN
In this study, ZnO nanoparticles (NPs) were synthesized in the presence of almond oil at various molar ratios of zinc acetate and sodium hydroxide, including 0.5:1, 0.75:1, 1:1, 1.25:1, and 1.5:1, to obtain pH values of 11, 10, 9, 8, and 7, respectively. The XRD results revealed that ZnO NPs exhibit a hexagonal structure, with high crystallinity. SEM results showed that dense and large sized ZnO NPs were formed at pH 11, and relatively small (~30-40 nm) NPs were obtained at pH 9. The size distribution can be explained in terms of the presence of OH- ions at different pH levels. However, the larger size of the NPs at pH 7 compared to those at pH 8-11 were due to the coalescence of NPs suitable for antioxidant/antibacterial activities. ZnO NPs demonstrated a high degradation efficiency (~93%) in 90 min, with a high rate constant for Methyl Orange (MO), which is better than the previously reported rate. The larger sized almond oil capped ZnO NPs also showed excellent radical scavenging activity (94%) and are proven to be good carriers to resist Escherichia coli (E. coli) bacteria.
RESUMEN
Biogenic routes for the synthesis of nanoparticles are environmentally friendly, nontoxic, biocompatible, and cost-effective compared to traditional synthesis methods. In this study, cobalt ferrite was synthesized using Zingiber officinale and Elettaria cardamom Seed extracts. Effect of copper contents (x = 0.0, 0.3, 0.6 and 0.9) on the plant extracted Cux(Co1-xFe2O4) was investigated by XRD, SEM, EDX, UV-Vis., PL, FE-SEM, FTIR and photocatalytic activity. XRD results revealed that nanoparticles exhibit a cubical spinel structure with an average diameter of 7-45 nm, calculated by the Debye Scherer formula. The value of the lattice parameter decreased from 8.36 Å to 8.08 Å with substitution of copper, which can be attributed to mismatch of ionic radii of Cu2+ (0.73 Å) and Co2+ (0.74 Å) ions. SEM analysis showed that nanoparticles exhibit a spherical shape (~13 nm diameter) for undoped samples and low Cu concentration, while they changed to a hexagonal structure at higher Cu concentration (x = 0.9) with a diameter ~46 nm and a decreased degree of agglomeration. FE-SEM further confirmed the nanoparticles' size and shape. EDX analysis confirmed the presence of cobalt, iron, and oxygen without contamination. The optical absorption spectra of UV-vis and PL showed red-shift, which can be accredited to larger crystalline sizes of nanoparticles. FTIR spectra showed two main bands at 410 and 605 cm-1, indicating the presence of intrinsic vibrations of the octahedral and tetrahedral complexes, respectively. The photocatalytic activity of Co0.4Cu0.6 Fe2O4 nanoparticles was investigated using methylene blue (MB) and methyl orange (MO) dyes under visible light irradiation. The degradation rate (93.39% and 83.15%), regression correlation coefficient (0.9868 and 0.9737) and rate constant (0.04286 and 0.03203 rate·min-1) were calculated for MB and MO, respectively. Mechanisms for the formation and photocatalytic activity of Cu-substituted plant-extracted cobalt ferrite were discussed. The Co0.4Cu0.6 Fe2O4 nanoferrite was found to be an efficient photocatalyst, and can be exploited for wastewater treatment applications for MB/MO elimination.
RESUMEN
The effect of laser irradiation with different numbers of laser shots on the microstructure, the surface, and the hardness of gun metal alloy was studied by a KrF pulsed excimer laser system, X-ray diffraction, Raman spectroscopy, scanning electron microscopy, and Vickers hardness test. The influence of 100-500 laser shots was irradiated on the surface hardness profile and on the microstructure of gunmetal alloy. XRD results showed the maximum 2θ shift, the maximum full width of half maximum FWHM, the maximum dislocation density, and the minimum crystallite size for the sample irradiated with 300 laser shots. The hardness was measured in three different regions at the laser irradiated spot, and it was found that maximum hardness was present at the heat affected zone for all samples. The hardness value of the un-irradiated sample of gun metal was 180, and the value increased up to 237 by raising the number of laser shots up to 300. The peak value of surface hardness of the laser treated sample was 32% higher than the un-irradiated sample. The Raman shift of the un-exposed sample was 605 cm-1 and shifted to a higher value of wave number at 635 cm-1 at 300 laser shots. The hardness value was decreased by further increasing the number of laser shots up to 500. The samples irradiated with 400 and 500 laser shots exhibited smaller hardness and dislocation defect density, which was assigned to possible annealing caused by irradiation.
RESUMEN
Polyurethane aerogels were prepared from a rigid aromatic triisocyanate (tris(4-isocyanatophenyl)methane) and cage-shaped α- and ß-cyclodextrins as rigid polyols. Gelation was carried out in DMF using dibutyltin dilaurate as catalyst. Wet-gels were dried to aerogels (abbreviated as α- or ß-CDPU-xx) with supercritical fluid CO2. "xx" stands for the percent weight of the two monomers in the sol and was varied at two levels for each cyclodextrin: 2.5% and 15%. All aerogels were characterized with solid-state 13C and 15N NMR, CHN analysis, FTIR, XPS, SEM, and gas (N2 and CO2) sorption porosimetry. α- and ß-CDPU-xx aerogels were investigated as desiccants at room temperature. All materials had relatively higher capacities for water adsorption from high-humidity environments (99%) than typical commercial desiccants like silica or Drierite. However, α-CDPU-2.5 aerogels did stand out with a water uptake capacity reaching 1 g of H2O per gram of material. Most importantly though, adsorbed water could be released quantitatively without heating, by just reducing the relative humidity of the environment to 10%. All α- and ß-CDPU-xx aerogel samples were cycled between humid and dry environments 10 times. Their unusual behavior was traced to filling smaller mesopores with water and was attributed to a delicate balance of enthalpic (H-bonding) and entropic factors, whereas the latter are a function of pore sizes.
RESUMEN
Tsukamurella pulmonis is an opportunistic actinomycetal pathogen associated with a variety of rarely diagnosed human infections. In clinical cases of infection, T. pulmonis usually accompanies other bacterial pathogens. Because of these mixed infections, a robust diagnostic assay is important. The bacteria cell surface polysaccharides are considered not only useful targets for diagnostics but also intriguing subjects for analysis of the interactions that regulate the host response in general. Here, the structure of the polysaccharide component of the T. pulmonis cell wall was established. Sugar and methylation analysis and 2D-NMR techniques revealed that its polysaccharide belongs to the class of arabinomannan composed of branched tetrasaccharide repeating units, with addition of linear â6)-α-D-Manp-(1â mannan. Rabbit polyclonal sera against T. pulmonis and T. paurometabola bacterial cells revealed cross reactivity between their antigens. Tissue samples from mice infected with T. pulmonis revealed liver abscesses and pathologic granules located intracellularly when immunohistochemically stained with monoclonal antibodies raised against T. pulmonis polysaccharide. Ultrastructural studies revealed that these granules contain T. pulmonis cells. These observations indicate that T. pulmonis is a pathogenic species capable of spreading within the organism, presumably through the blood.
Asunto(s)
Actinobacteria/química , Anticuerpos Monoclonales/metabolismo , Infecciones por Bacterias Grampositivas/diagnóstico , Mananos/análisis , Mananos/química , Polisacáridos Bacterianos/análisis , Polisacáridos Bacterianos/química , Animales , Modelos Animales de Enfermedad , Infecciones por Bacterias Grampositivas/microbiología , Infecciones por Bacterias Grampositivas/patología , Inmunohistoquímica , Absceso Hepático/diagnóstico , Absceso Hepático/microbiología , Absceso Hepático/patología , Espectroscopía de Resonancia Magnética , Mananos/inmunología , Ratones , Estructura Molecular , Polisacáridos Bacterianos/inmunología , Coloración y EtiquetadoRESUMEN
Polymeric aerogels (PA-xx) were synthesized via room-temperature reaction of an aromatic triisocyanate (tris(4-isocyanatophenyl) methane) with pyromellitic acid. Using solid-state CPMAS 13C and 15N NMR, it was found that the skeletal framework of PA-xx was a statistical copolymer of polyamide, polyurea, polyimide, and of the primary condensation product of the two reactants, a carbamic-anhydride adduct. Stepwise pyrolytic decomposition of those components yielded carbon aerogels with both open and closed microporosity. The open micropore surface area increased from <15 m2 g-1 in PA-xx to 340 m2 g-1 in the carbons. Next, reactive etching at 1,000 °C with CO2 opened access to the closed pores and the micropore area increased by almost 4× to 1150 m2 g-1 (out of 1750 m2 g-1 of a total BET surface area). At 0 °C, etched carbon aerogels demonstrated a good balance of adsorption capacity for CO2 (up to 4.9 mmol g-1), and selectivity toward other gases (via Henry's law). The selectivity for CO2 versus H2 (up to 928:1) is suitable for precombustion fuel purification. Relevant to postcombustion CO2 capture and sequestration (CCS), the selectivity for CO2 versus N2 was in the 17:1 to 31:1 range. In addition to typical factors involved in gas sorption (kinetic diameters, quadrupole moments and polarizabilities of the adsorbates), it is also suggested that CO2 is preferentially engaged by surface pyridinic and pyridonic N on carbon (identified with XPS) in an energy-neutral surface reaction. Relatively high uptake of CH4 (2.16 mmol g-1 at 0 °C/1 bar) was attributed to its low polarizability, and that finding paves the way for further studies on adsorption of higher (i.e., more polarizable) hydrocarbons. Overall, high CO2 selectivities, in combination with attractive CO2 adsorption capacities, low monomer cost, and the innate physicochemical stability of carbon render the materials of this study reasonable candidates for further practical consideration.
RESUMEN
It is known that prolonged pressure on the plantar area is one of the main factors in developing foot ulcers. With current technology, electronic pressure monitoring systems can be placed as an insole into regular shoes to continuously monitor the plantar area and provide evidence on ulcer formation process as well as insight for proper orthotic footwear design. The reliability of these systems heavily depends on the spatial resolution of their sensor platforms. However, due to the cost and energy constraints, practical wireless in-shoe pressure monitoring systems have a limited number of sensors, i.e., typically K < 10. In this paper, we present a knowledge-based regression model (SCPM) to reconstruct a spatially continuous plantar pressure image from a small number of pressure sensors. This model makes use of high-resolution pressure data collected clinically to train a per-subject regression function. SCPM is shown to outperform all other tested interpolation methods for K < 60 sensors, with less than one-third of the error for K = 10 sensors. SCPM bridges the gap between the technological capability and medical need and can play an important role in the adoption of sensing insole for a wide range of medical applications.
Asunto(s)
Fenómenos Biomecánicos/fisiología , Pie/fisiología , Procesamiento de Imagen Asistido por Computador/métodos , Modelos Biológicos , Presión , Adulto , Femenino , Marcha/fisiología , Humanos , Masculino , Persona de Mediana Edad , Monitoreo Fisiológico/instrumentación , Monitoreo Fisiológico/métodos , Análisis de Componente Principal , Zapatos , Adulto JovenRESUMEN
The diabetic foot complications constitute a tremendous challenge for patients, caregivers, and the healthcare system. Studies show up to 25% of diabetic individuals will develop a foot ulcer during their lifetime and many of these patients eventually must undergo amputation as a result of infection due to untreated foot ulcers. With current technology, in-shoe monitoring systems can be implemented to continuously monitor at-risk ulceration sites based on known indicators such as peak pressure. The important parameters in designing a pressure-sensing insole include the number, location and size of sensors. In this paper, we aim at showing the criticality of sensor architectural tradeoff in developing the in-shoe plantar pressure monitoring systems. We evaluate this tradeoff by using our custom-made platform for data collection during normal walking.
Asunto(s)
Pie Diabético/fisiopatología , Úlcera del Pie/fisiopatología , Monitoreo Ambulatorio/métodos , Caminata , Adolescente , Adulto , Fenómenos Biomecánicos , Diseño de Equipo , Femenino , Pie/anatomía & histología , Marcha , Humanos , Masculino , Persona de Mediana Edad , Presión , Riesgo , Zapatos , Transductores , Adulto JovenRESUMEN
Recent trends in clinical and telemedicine applications highly demand automation in electrocardiogram (ECG) signal processing and heart beat classification. A patient-adaptive cardiac profiling scheme using repetition-detection concept is proposed in this paper. We first employ an efficient wavelet-based beat-detection mechanism to extract precise fiducial ECG points. Then, we implement a novel local ECG beat classifier to profile each patient's normal cardiac behavior. ECG morphologies vary from person to person and even for each person, it can vary over time depending on the person's physical condition and/or environment. Having such profile is essential for various diagnosis (e.g., arrhythmia) purposes. One application of such profiling scheme is to automatically raise an early warning flag for the abnormal cardiac behavior of any individual. Our extensive experimental results on the MIT-BIH arrhythmia database show that our technique can detect the beats with 99.59% accuracy and can identify abnormalities with a high classification accuracy of 97.42%.