Synthetic progress of organic thermally activated delayed fluorescence emitters via C-H activation and functionalization.

Thermally activated delayed fluorescence (TADF) emitters have become increasingly prominent due to their promising applications across various fields, prompting a continuous demand for developing reliable synthetic methods to access them. This review aims to highlight the progress made in the last decade in synthesizing organic TADF compounds through C-H bond activation and functionalization. The review begins with a brief introduction to the basic features and design principles of TADF emitters. It then provides an overview of the advantages and concise development of C-H bond transformations in constructing TADF emitters. Subsequently, it summarizes both transition-metal-catalyzed and non-transition-metal-promoted C-H bond transformations used for the synthesis of TADF emitters. Finally, the review gives an outlook on further challenges and potential directions in this field.

A Difluoro-Methoxylated Ending-Group Asymmetric Small Molecule Acceptor Lead Efficient Binary Organic Photovoltaic Blend.

Developing a new end group for synthesizing asymmetric small molecule acceptors (SMAs) is crucial for achieving high-performance organic photovoltaics (OPVs). Herein, an asymmetric small molecule acceptor, BTP-BO-4FO, featuring a new difluoro-methoxylated end-group is reported. Compared to its symmetric counterpart L8-BO, BTP-BO-4FO exhibits an upshifted energy level, larger dipole moment, and more sequential crystallinity. By adopting two representative and widely available solvent additives (1-chloronaphthalene (CN) and 1,8-diiodooctane (DIO)), the device based on PM6:BTP-BO-4FO (CN) photovoltaic blend demonstrates a power conversion efficiency (PCE) of 18.62% with an excellent open-circuit voltage (VOC) of 0.933 V, which surpasses the optimal result of L8-BO. The PCE of 18.62% realizes the best efficiencies for binary OPVs based on SMAs with asymmetric end groups. A series of investigations reveal that optimized PM6:BTP-BO-4FO film demonstrates similar molecular packing motif and fibrillar phase distribution as PM6:L8-BO (DIO) does, resulting in comparable recombination dynamics, thus, similar fill factor. Besides, it is found PM6:BTP-BO-4FO possesses more efficient charge generation, which yields better VOC-JSC balance. This study provides a new ending group that enables a cutting-edge efficiency in asymmetric SMA-based OPVs, enriching the material library and shed light on further design ideas.

Three-Charge (0, -1, -2) Ligand-Based Binuclear and Mononuclear Deep-Red Phosphorescent Iridium Complexes Bearing Benzo[d]oxazole-2-Thiol Ligand.

A new class of three-charge (0, -1, -2) ligand-based binuclear and mononuclear iridium complexes bearing benzo[d]oxazole-2-thiol ligand have been synthesized. Notably, the binuclear complexes (IrIr1 and IrIr2) can be generated at low temperatures by reacting the iridium complex precursors (2a and 2b) with equal amounts of the benzo[d]oxazole-2-thiol ligands, while the corresponding mononuclear complexes (Ir1 and Ir2) are formed at high temperatures. X-ray diffraction analysis shows that the benzo[d]oxazole-2-thiol ligand plays an unusual and interesting bridging role in binuclear complexes and induces rich intermolecular and intramolecular interactions, while in mononuclear complexes, it forms an interesting four-membered ring coordination. More importantly, all complexes experienced efficient deep-red emission in the 628-674 nm range, and the mononuclear complexes have higher luminescent efficiency and longer excited state lifetime than the binuclear complexes. As a result, organic light-emitting diode devices incorporating two mononuclear complexes (Ir1 and Ir2) as guest material of the light-emitting layer can obtain good maximum external quantum efficiency (3.5% and 5.5%) in the deep-red region (629 and 632 nm) with CIE coordinates (0.61, 0.33) and (0.62, 0.34), along with a low turn-on voltage (2.8 V).

Indolo[3,2-b]indole-based multi-resonance emitters for efficient narrowband pure-green organic light-emitting diodes.

Organic light-emitting diodes (OLEDs) utilizing multi-resonance (MR) emitters show great potential in ultrahigh-definition display benefitting from superior merits of MR emitters such as high color purity and photoluminescence quantum yields. However, the scarcity of narrowband pure-green MR emitters with novel backbones and facile synthesis has limited their further development. Herein, two novel pure-green MR emitters (IDIDBN and tBuIDIDBN) are demonstrated via replacing the carbazole subunits in the bluish-green BCzBN skeleton with new polycyclic aromatic hydrocarbon (PAH) units, 5-phenyl-5,10-dihydroindolo[3,2-b]indole (IDID) and 5-(4-(tert-butyl)phenyl)-5,10-dihydroindolo[3,2-b]indole (tBuIDID), to simultaneously enlarge the π-conjugation and enhance the electron-donating strength. Consequently, a successful red shift from aquamarine to pure-green is realized for IDIDBN and tBuIDIDBN with photoluminescence maxima peaking at 529 and 532 nm, along with Commission Internationale de l'Eclairage (CIE) coordinates of (0.25, 0.71) and (0.28, 0.70). Furthermore, both emitters revealed narrowband emission with small full width at half-maximum (FWHM) below 28 nm. Notably, the narrowband pure-green emission was effectively preserved in corresponding devices, which afford elevated maximum external quantum efficiencies of 16.3% and 18.3% for IDIDBN and tBuIDIDBN.

Through-Space Charge-Transfer Organogold(III) Complexes Enable High-Performance X-ray Scintillation and Imaging.

Organic scintillators have recently attracted growing attention for X-ray detection in industrial and medical applications. However, these materials still face critical obstacles of low attenuation efficiency and/or inefficient triplet exciton utilization. Here we developed a new category of organogold(III) complexes, Tp-Au-1 and Tp-Au-2, through adopting a through-space interaction motif to realize high X-ray attenuation efficiency and efficient harvesting of triplet excitons for emission. Thanks to the efficient through-space charge transfer process, this panel of complexes achieved higher photoluminescence quantum yield and shorter radiative lifetimes compared with the through-bond reference complexes. Inspiringly, these organogold(III) complexes exhibited polarity-dependent emission origins: thermally activated delayed fluorescence and/or phosphorescence. Under X-ray irradiation, Tp-Au-2 manifested intense radioluminescence together with a record-high scintillation light yield of 77,600 photons MeV-1 for organic scintillators. The resulting scintillator screens demonstrated high-quality X-ray imaging with >16.0 line pairs mm-1 spatial resolution, outstripping most organic and inorganic scintillators. This finding provides a feasible strategy for the design of superior organic X-ray scintillators.

Dynamic Reversible Full-Color Piezochromic Fluorogens Featuring Through-Space Charge-Transfer Thermally Activated Delayed Fluorescence and their Application as X-Ray Imaging Scintillators.

Thermally activated delayed fluorescence (TADF) emitters featuring through-space charge transfer (TSCT) can be excellent candidates for piezochromic luminescent (PCL) materials due to their structural dynamics. Spatial donor-acceptor (D-A) stacking arrangements enable the modulation of inter- and intramolecular D-A interactions, as well as spatial charge transfer states, under varying pressure conditions. Herein, we demonstrate an effective approach toward dynamic reversible full-color PCL materials with TSCT-TADF characteristics. Their single crystals exhibit a full-color-gamut PCL process spanning a range of 170 nm. Moreover, the TSCT-TADF-PCL emitters display a unity photoluminescence quantum yield, and show promising application in X-ray scintillator imaging.

Orienting Group Directed Cascade Borylation for Efficient One-Shot Synthesis of 1,4-BN-Doped Polycyclic Aromatic Hydrocarbons as Narrowband Organic Emitters.

1,4-BN-doped polycyclic aromatic hydrocarbons (PAHs) have emerged as very promising emitters in organic light-emitting diodes (OLEDs) due to their narrowband emission spectra that may find application in high-definition displays. While considerable research has focused on investigating the properties of these materials, less attention has been placed on their synthetic methodology. Here we developed an efficient synthetic method for 1,4-BN-doped PAHs, which enables sustainable production of narrowband organic emitting materials. By strategically introducing substituents, such as methyl, tert-butyl, phenyl, and chloride, at the C5 position of the 1,3-benzenediamine substrates, we achieved remarkable regioselective borylation in the para-position of the substituted moiety. This approach facilitated the synthesis of a diverse range of 1,4-BN-doped PAHs emitters with good yields and exceptional regioselectivity. The synthetic method demonstrated excellent scalability for large-scale production and enabled late-stage transformation of the borylated products. Mechanistic investigations provided valuable insights into the pivotal roles of electron effect and steric hindrance effect in achieving highly efficient regioselective borylation. Moreover, the outstanding device performance of the synthesized compounds 10 b and 6 z, underscores the practicality and significance of the developed method.

Precise Methylation Yields Acceptor with Hydrogen-Bonding Network for High-Efficiency and Thermally Stable Polymer Solar Cells.

Utilizing intermolecular hydrogen-bonding interactions stands for an effective approach in advancing the efficiency and stability of small-molecule acceptors (SMAs) for polymer solar cells. Herein, we synthesized three SMAs (Qo1, Qo2, and Qo3) using indeno[1,2-b]quinoxalin-11-one (Qox) as the electron-deficient group, with the incorporation of a methylation strategy. Through crystallographic analysis, it is observed that two Qox-based methylated acceptors (Qo2 and Qo3) exhibit multiple hydrogen bond-assisted 3D network transport structures, in contrast to the 2D transport structure observed in gem-dichlorinated counterpart (Qo4). Notably, Qo2 exhibits multiple and stronger hydrogen-bonding interactions compared with Qo3. Consequently, PM6 : Qo2 device realizes the highest power conversion efficiency (PCE) of 18.4 %, surpassing the efficiencies of devices based on Qo1 (15.8 %), Qo3 (16.7 %), and Qo4 (2.4 %). This remarkable PCE in PM6 : Qo2 device can be primarily ascribed to the enhanced donor-acceptor miscibility, more favorable medium structure, and more efficient charge transfer and collection behavior. Moreover, the PM6 : Qo2 device demonstrates exceptional thermal stability, retaining 82.8 % of its initial PCE after undergoing annealing at 65 °C for 250 hours. Our research showcases that precise methylation, particularly targeting the formation of intermolecular hydrogen-bonding interactions to tune crystal packing patterns, represents a promising strategy in the molecular design of efficient and stable SMAs.

Narrowband Near-Infrared Multiple-Resonance Thermally Activated Delayed Fluorescence Emitters towards High-Performance and Stable Organic Light-Emitting Diodes.

Multiple-resonance thermally activated delayed fluorescence (MR-TADF) materials are highly coveted for their high efficiency and narrowband emission in organic light-emitting diodes (OLEDs). Nevertheless, the development of near-infrared (NIR) MR-TADF emitters remains a formidable challenge. In this study, we design two new NIR MR-TADF emitters, PXZ-R-BN and BCz-R-BN, by embedding 10H-phenoxazine (PXZ) and 7H-dibenzo[c,g]carbazole (BCz) fragments to increase the electron-donating ability or extending π-conjugation on the framework of para-boron fusing polycyclic aromatic hydrocarbons (PAHs). Both compounds emit in the NIR region, with a full-width at half-maximum (FWHM) of 49 nm (0.13 eV) for PXZ-R-BN and 43 nm (0.11 eV) for BCz-R-BN in toluene. To sensitize the two NIR MR-TADF emitters in OLEDs, a new platinum complex, Pt-1, is designed as a sensitizer. The PXZ-R-BN-based sensitized OLEDs achieve a maximum external quantum efficiency (EQEmax ) of nearly 30 % with an emission band at 693 nm, and exceptional long operational stability with an LT97 (time to 97 % of the initial luminance) value of 39084 h at an initial radiance of 1000 mW sr-1 m-2 . The BCz-R-BN-based OLEDs reach EQEmax values of 24.2 % with an emission band at 713 nm, which sets a record value for NIR OLEDs with emission bands beyond 700 nm.

Charge Transfer Excited State Promoted Multiple Resonance Delayed Fluorescence Emitter for High-Performance Narrowband Electroluminescence.

Multiple resonance thermally activated delayed fluorescence (MR-TADF) emitters are promising candidates for narrowband organic light-emitting diodes, but their electroluminescent performance is typically hindered by the slow reverse intersystem crossing rate (kRISC). Herein, we present an effective strategy to introduce a multichannel reverse intersystem crossing (RISC) pathway with large spin-orbit coupling by orthogonally linking an electron-donating unit to the MR framework. Through delicate manipulation of the excited-state energy levels, an additional intersegmental charge transfer triplet state could be "silently" induced without perturbing the MR character of the lowest excited singlet state. The proof-of-concept emitter CzBN3 not only affords 23-fold increase of kRISC compared with its prototypical MR skeleton but also realizes close-to-unity photoluminescence quantum yield, large radiative rate constant, and very narrow emission spectrum. These merits enable high maximum external quantum efficiency (EQEmax) of up to 37.1% and alleviated efficiency roll-off in the sensitizer-free device (EQE1000 = 30.4%), and a further boost of efficiency (EQEmax/1000 = 42.3/34.1%) is realized in the hyperfluorescent device. The state-of-the-art electroluminescent performance validates the superiority of our molecular design strategy.

A Simple Approach to Solution-Processible Small-Molecule Multi-Resonance TADF Emitters for High-Performance Narrowband OLEDs.

Most multi-resonance (MR) induced thermally activated delayed fluorescence (TADF) emitters generally exhibit strong aggregation and relatively worse solubility due to their rigid and planar molecule structures, which is highly undesirable for solution-processible devices. Herein, a simple but feasible approach for solution-processible small-molecule MR-TADF emitters is developed by incorporating two MR-TADF units onto carbazole bridge bearing long alkyl chains. The obtained emitters demonstrate supreme film-forming capability and narrowband emissions with full-width at half-maximums (FWHMs) of 22 nm. The resulting solution-processed narrowband electroluminescent devices achieve maximum external quantum efficiency of 27.1 %, which represents the highest efficiency among the solution-processed OLEDs based on MR-TADF emitters. This simple approach reveals great potential of developing solution-processible emitters for rigid and planar molecular structures.

Narrowband Fluorescent Emitters Based on BN-Doped Polycyclic Aromatic Hydrocarbons for Efficient and Stable Organic Light-Emitting Diodes.

Organic light-emitting diodes (OLEDs) using conventional fluorescent emitters are currently attracting considerable interests due to outstanding stability and abundant raw materials. To construct high-performance narrowband fluorophores to satisfy requirements of ultra-high-definition displays, a strategy fusing multi-resonance BN-doped moieties to naphthalene is proposed to construct two novel narrowband fluorophores. Green Na-sBN and red Na-dBN, manifest narrow full-width at half-maxima of 31 nm, near-unity photoluminescence quantum yields and molecular horizontal dipole ratios above 90 %. Their OLEDs exhibit the state-of-the-art performances including high external quantum efficiencies (EQE), ultra-low efficiency roll-off and long operational lifetimes. The Na-sBN-based device achieves EQE as high as 28.8 % and remains 19.8 % even at luminance of 100,000 cd m-2 , and Na-dBN-based device acquires a record-high EQE of 25.2 % among all red OLEDs using pure fluorescent emitters.

A Tetrahedral Bisacridine Donor Enables Fast Radiative Decay in Thermally Activated Delayed Fluorescence Emitter.

Achieving high efficiency and low efficiency roll-off simultaneously is of great significance for further application of thermally activated delayed fluorescent (TADF) emitters. A balance between radiative decay and reversed intersystem crossing must be carefully established. Herein, we propose a qunolino-acridine (QAc) donor composing two acridine with both planar (pAc) and bended (bAc) geometries. Combining with triazine, a TADF emitter QAc-TRZ is assembled. The pAc provides a well interaction with triazine which ensures a decent TADF behavior, while the bAc offers a delocalization of highest occupied molecular orbital (HOMO) which guarantees an enhancement of radiative decay. Remarkably, QAc-TRZ enables a highly efficient organic light emitting diode (OLED) with maximum external quantum efficiency (EQE) of 37.3 %. More importantly, the efficiencies under 100/1000 cd m-2 stay 36.3 % and 31.7 %, respectively, and remain 21.5 % even under 10 000 cd m-2 .

Regulation of Multiple Resonance Delayed Fluorescence via Through-Space Charge Transfer Excited State towards High-Efficiency and Stable Narrowband Electroluminescence.

B- and N-embedded multiple resonance (MR) type thermally activated delayed fluorescence (TADF) emitters usually suffer from slow reverse intersystem crossing (RISC) process and aggregation-caused emission quenching. Here, we report the design of a sandwich structure by placing the B-N MR core between two electron-donating moieties, inducing through-space charge transfer (TSCT) states. The proper adjusting of the energy levels brings about a 10-fold higher RISC rate in comparison with the parent B-N molecule. In the meantime, a high photoluminescence quantum yield of 91 % and a good color purity were maintained. Organic light-emitting diodes based on the new MR emitter achieved a maximum external quantum efficiency of 31.7 % and small roll-offs at high brightness. High device efficiencies were also obtained for a wide range of doping concentrations of up to 20 wt % thanks to the steric shielding of the B-N core. A good operational stability with LT95 of 85.2 h has also been revealed. The dual steric and electronic effects resulting from the introduction of a TSCT state offer an effective molecular design to address the critical challenges of MR-TADF emitters.

Peripherally Heavy-Atom-Decorated Strategy Towards High-Performance Pure Green Electroluminescence with External Quantum Efficiency over 40 .

Heavy-atom integration into thermally activated delayed fluorescence (TADF) molecule could significantly promote the reverse intersystem crossing (RISC) process. However, simultaneously achieving high efficiency, small roll-off, narrowband emission and good operational lifetime remains a big challenge for the corresponding organic light-emitting diodes (OLEDs). Herein, we report a pure green multi-resonance TADF molecule BN-STO by introducing a peripheral heavy atom selenium onto the parent BN-Cz molecule. The organic light-emitting diode device based on BN-STO exhibited state-of-the-art performance with a maximum external quantum efficiency (EQE) of 40.1 %, power efficiency (PE) of 176.9 lm W-1 , well-suppressed efficiency roll-off and pure green gamut. This work reveals a feasible strategy to reach a balance between fast RISC process and narrow full width at half maximum (FWHM) of MR-TADF by heavy atom effect.

High-Performance Organic Solar Cells Containing Pyrido[2,3-b]quinoxaline-Core-Based Small-Molecule Acceptors with Optimized Orbit Overlap Lengths and Molecular Packing.

The central core in A-DA1 D-A-type small-molecule acceptor (SMAs) plays an important role in determining the efficiency of organic solar cells (OSCs), while the principles governing the efficient design of SMAs remain elusive. Herein, we developed a series of SMAs with pyrido[2,3-b]quinoxaline (PyQx) as new electron-deficient unit by combining with the cascade-chlorination strategy, namely Py1, Py2, Py3, Py4 and Py5. The introduction of chlorine atoms reduces the intramolecular charge transfer effects but elevates the LUMO values. Density functional theory (DFT) reveals that Py2 with ortho chlorine substituted PyQx and Py5 with two chlorine atoms yield larger dipole moments and smaller π⋅⋅⋅π stacking distances, as compared with the other three acceptors. Moreover, Py2 shows the strongest light absorption capability induced by extended orbit overlap lengths and more efficient packing structures in the dimers. These features endow the best device performance of Py2 due to the better molecular packing and aggregation behaviors, more suitable domain sizes with better exciton dissociation and charge recombination. This study highlights the significance of incorporating large dipole moments, small π⋅⋅⋅π stacking distances and extended orbit overlap lengths in dimers into the development of high-performance SMAs, providing insight into the design of efficient A-DA1 D-A-type SMAs for OSCs.

Manipulating Exciton Dynamics toward Simultaneous High-Efficiency Narrowband Electroluminescence and Photon Upconversion by a Selenium-Incorporated Multiresonance Delayed Fluorescence Emitter.

Multiresonance thermal activated delayed fluorescence (MR-TADF) materials with an efficient spin-flip transition between singlet and triplet excited states remain demanding. Herein, we report an MR-TADF compound (BN-Se) simultaneously possessing efficient (reverse) intersystem crossing (ISC/RISC), fast radiative decay, close-to-unity quantum yield, and narrowband emission by embedding a single selenium atom into a common 4,4'-diazaborin framework. Benefitting from the high RISC efficiency accelerated by the heavy-atom effect, organic light-emitting diodes (OLEDs) based on BN-Se manifest excellent performance with an external quantum efficiency of up to 32.6% and an ultralow efficiency roll-off of 1.3% at 1000 cd m-2. Furthermore, the high ISC efficiency and small inherent energy loss also render BN-Se a superior photosensitizer to realize the first example of visible (λex > 450 nm)-to-UV (λem < 350 nm) triplet-triplet annihilation upconversion, with a high efficiency (21.4%) and an extremely low threshold intensity (1.3 mW cm-2). This work not only aids in designing advanced pure organic molecules with fast exciton dynamics but also highlights the value of MR-TADF compounds beyond OLED applications.

Iridium(III) Complexes with [-2, -1, 0] Charged Ligand Realized Deep-Red/Near-Infrared Phosphorescent Emission.

A series of [-2, -1, 0] charged-ligand based iridium(III) complexes of [Ir(bph)(bpy)(acac)] (1), [Ir(bph)(2MeO-bpy)(acac)] (2), [Ir(bph)(2CF3 -bpy)(acac)] (3), [Ir(bph)(bpy)(2t Bu-acac)] (4) and [Ir(bph)(bpy)(CF3 -acac)] (5), which using biphenyl as dianionic ligand [-2], acetylacetone (or its derivatives) as monoanionic ligand [-1], and 2,2'-bipyridine (or its derivatives) as neutral ligand [0] were designed and synthesized. The chemical structures were well characterized. All of the ligands have simple chemical structures, thus further making the complexes have excellent thermal stability and are easy to sublimate and purify. Phosphorescent characteristics with short emission lifetime were demonstrated for these emitters. Notably, all of the complexes exhibit remarkable deep red/near infrared emission, which is quite different from the reported [-1, -1, -1] charged-ligand based iridium(III) complexes. The photophysical properties of these complexes are regularly improved by introducing electron-donating or -withdrawing groups into [-1] or [0] charged-ligand. The related organic light-emitting diodes exhibited deep red/near infrared emission with acceptable external quantum efficiency and low turn-on voltage (<2.6 V). This work provides a new idea for the construction of new type phosphorescent iridium(III) emitters with different valence states of [-2, -1, 0] charged ligands, thus offering new opportunities and challenges for their optoelectronic applications.

Deep-Red/Near-Infrared to Blue-Green Phosphorescent Iridium(III) Complexes Featuring Three Differently Charged (0, -1, and -2) Ligands: Structures, Photophysics, and Organic Light-Emitting Diode Application.

We have designed and synthesized a new family of neutral phosphorescent iridium(III) complexes (Ir1-Ir6) featuring three differently charged (0, -1, and -2) ligands, in which biphenyl (bp) is used as a dianionic (-2) ligand, 4,6-difluorophenylpyridine (dfppy) or 1-phenylisoquinoline (piq) is used as a monoanionic (-1) ligand, and 2,2'-bipyridyl (bpy), 1,10-phenanthroline (phen), 1,2-bis(diphenylphosphanyl)benzene (dppb), or 1,2-bis(diphenylphosphanyl)ethane (dppe) is used as a neutral (0) ligand. The X-ray structures confirm that three coordination carbon atoms of all complexes assume a facial geometry, which can be beneficial to the stability of the structure. More importantly, the emitting color of the complexes can be tuned from deep red/near-infrared (NIR) (680-710 nm) to blue-green (466-496 nm) with different monoanionic (-1) ligands and neutral (0) ligands. Interestingly, the complex Ir5 shows a significant aggregation-induced phosphorescent emission effect, while Ir6 with a similar structure shows an opposite aggregation-caused quenching effect, mainly due to slight differences in the neutral (0) ligand structure. Notably, all deep red/NIR-emitting complexes (Ir1-Ir4) exhibit a distinct charge transfer (CT) excited state from the dianionic (-2) ligand to the neutral (0) ligand according to density functional theory calculations, whereas the excited state of blue-green-emitting complexes (Ir5-Ir6) displays the CT from the dianionic (-2) ligand to the monoanionic (-1) ligand. Considering better stability and optical performance, the deep red-emitting complexes (Ir2 and Ir4) with a simple structure are used as emitting layers of organic light-emitting diode devices and achieved good maximum external quantum efficiency (4.9 and 5.8%) peaking at 676 and 655 nm, respectively, with a very low turn-on voltage (2.5 V). This research provides a good strategy for the design of phosphorescent iridium complexes based on three differently charged (0, -1, and -2) ligands and their optoelectric applications.

Aggregation-Dependent Circularly Polarized Luminescence and Thermally Activated Delayed Fluorescence from Chiral Carbene-CuI -Amide Enantiomers.

The field of luminescent carbene-metal-amide (CMA) complexes and chiroptical-active materials has been blossoming in recent years, although chiroptical-active CMA complexes have not been reported so far. For the first time, a pair of chiral CuI -based CMA enantiomers, (R,R)-PSIPr*-Cu-DMAC and (S,S)-PSIPr*-Cu-DMAC, have been developed by using chiral phenyl-substituted N-heterocyclic carbenes as acceptor ligands in the CMA motif. The CuI -based CMA enantiomers exhibited aggregation-induced circularly polarized luminescence with a large luminescence dissymmetry factor of up to +0.027, the first reported for CMA complexes. This success originates from the limited ligand-ligand rotation freedom and asymmetrical packing pattern (helical structure) of the CMA enantiomers in the crystals. Moreover, these CuI enantiomers displayed inspiring aggregation-dependent thermally activated delayed fluorescence properties. These findings bring new insights into the optical properties of chiral CMA complexes from the perspective of aggregation states.