RESUMO
Photochromic inks have been an attractive authentication strategy to improve the anti-counterfeiting efficiency of commercial products. However, recent reports have shown significant disadvantages with photochromic inks, including poor durability and high cost. In this context, we developed novel photochromic nanofibres for advanced anti-counterfeiting applications. Lanthanide-doped strontium aluminate (LdSA) nanoparticles (NPs) were prepared and immobilized into electrospun cellulose acetate nanofibres (CANF). Authentication materials immobilized with inorganic photochromic agents can warranty durability and photostability. Therefore, the ultraviolet-stimulated photochromism of LdSA-encapsulated cellulose acetate nanofibres (LdSA@CANF) demonstrated high reversibility and photostability. A broad range of cellulose acetate nanofibres with unique emission characteristics was developed when applying different ratios of LdSA NPs. LdSA@CANF appeared colourless under visible daylight, whereas a green emission was monitored under ultraviolet-light illumination. The shape and chemical content of the photochromic fibrous films were examined using various analytical techniques. The mechanical characteristics of LdSA@CANF-coated paper were investigated. The emission wavelength was detected at 514 nm to designate green colour, whereas the excitation wavelength was detected at 369 nm to indicate transparency. The prepared cellulose acetate nanofibrous film can be described as an efficient strategy for the anti-counterfeiting of commercialized items.
RESUMO
Poly(vinyl chloride) (PVC) was reinforced with electrospun glass nanofibres (EGN) to develop photochromic and afterglow materials such as smart windows and anti-counterfeiting prints. A colourless electrospun glass nanofibres@poly(vinyl chloride) (EGN@PVC) sheet was prepared by physical integration of lanthanide-doped aluminate nanoparticles (LANP). The low concentrations of LANP in the photochromic and photoluminescent EGN@PVC hybrids displayed fluorescence emission with instant reversibility. EGN@PVC with the highest phosphor concentrations showed persistent phosphorescence emission with slow reversibility. Based on the results of the Commission Internationale de l'éclairage Laboratory and luminescence spectroscopy, the translucent EGN@PVC samples became green in the presence of ultraviolet illumination and greenish-yellow in the absence of light. According to scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analyses, the morphological study of EGN and LANP showed diameters of 75-95 and 11-19 nm, respectively. The morphology of the EGN@PVC substrates was studied using SEM, X-ray fluorescence, and energy-dispersive X-ray spectroscopy. The mechanical characteristics of PVC were enhanced by reinforcement with EGN as a roughening agent. When comparing the scratching resistance of LANP-free substrate to photoluminescent EGN@PVC substrates, it was observed that the latter was much superior. The photoluminescence spectra were reported to have an emission peak at 519 nm when excited at 365 nm. These findings demonstrated that the luminous transparent EGN@PVC composites had improved superhydrophobic and UV-blocking characteristics.
Assuntos
Nanofibras , Cloreto de Vinil , Polímeros , Raios Ultravioleta , LuminescênciaRESUMO
Smart window can be defined as switchable material whose light transmission is altered upon exposure to light, voltage, or heat. However, smart windows are usually produced from expensive and breakable glass materials. Herein, transparent smart window with long-persistent phosphorescence, high optical transmittance, ultraviolet (UV) protection, rigid, high photostability and durability, an d superhydrophobicity was developed from recycled polyester (PET). Recycled polyester waste (RBW) was simply immobilized with different ratios of lanthanide-doped aluminate nanoparticles (LdAN) to provide a long-persistent phosphorescent polyester smart window (LdAN@PET) with an abili ty to persist emitting light for extended time periods. The solid-state high temperature technique was used to prepare lanthanide-doped aluminate (LdA) micro-scale powder. Then, the top-down technique was applied to afford the corresponding LdAN. Recycled shredded recycled polyester bottles were charged into a hot bath to provide a clear plastic shred bulk, which was then well-mixed with LdAN and drop-casted to provide long-persistent luminescent smart window. In order to improve the phosphor dispersion in the PET bulk, LdAN was synthesized in the nanoparticle form which was characterized utilizing transmission electron microscopy (TEM). For better preparation of translucent smart window of long-persistent phosphorescent polyester, LdAN must be homogeneously dispersed in the PET matrix without agglomeration. The morphology and chemical composition were studied by Fourier-transform infrared (FTIR) spectra), X-ray fluorescence (XRF) analysis, scanning electron microscopy (SEM), and energy-dispersion X-ray spectroscopy (EDX). In addition, spectral profiles of excitation and emission, and decay and lifetime were used to better understand the photoluminescence properties. The hardness properties were also investigated. The developed phosphorescent transparent polyester smart window demonstrated a color switch to intense green underneath UV irradiation and greenish-yellow under darkness as verified by CIELab color parameters. The afterglow polyester smart window showed an absorption wavelength at 365 nm and two phosphorescence intensities at 442 and 512 nm. An enhanced UV protection, photostability and hydrophobic activity were detected. The luminescent polyester substrates with lower LdAN ratios demonstrated rapid and reversible fluorescent photochromic activity beneath the UV light. The luminescent polyester substrates with higher LdAN contents displayed long-persistent phosphorescence afterglow. The current strategy can be simply applied for the production of smart windows, low thickness anti-counterfeiting films and warning signs.
Assuntos
Elementos da Série dos Lantanídeos , Interações Hidrofóbicas e Hidrofílicas , Luminescência , Poliésteres , EstrôncioRESUMO
Electrospun nanofibers mats are green synthesized using hydroxypropyl cellulose (HPC) individually or in conjugation with either poly(vinyl alcohol) (PVA) or Polyvinylpyrrolidone (PVP) to enhance the mechanical properties of the nanofibers mats. Desirable attributes of the as-obtained nanofibers mats are manifested via using SEM, FT-IR, TGA and conventional tools for mechanical and physical properties. The obtained data from SEM images demonstrated that the diclofenac sodium (DS) loaded nanofibers mats did not provide significant change of the morphological structure to the mats. In addition the thermal stability and the visual and mechanical properties of PVA or PVP was dramatically enhanced with the addition of HPC. The in vitro sustained release of DS drug was controlled when loaded into electrospun nanofibers of HPC with either PVA or PVP.
Assuntos
Celulose/análogos & derivados , Sistemas de Liberação de Medicamentos , Celulose/química , Nanofibras , Álcool de Polivinil , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
Biodegradable stents are considered a promising strategy for the endovascular treatment of cerebrovascular diseases. The visualization of biodegradable stents is of significance during the implantation and long-term follow-up. Endowing biodegradable stents with X-ray radiopacity can overcome the weakness of intrinsic radioparency of polymers. Hence, this work focuses on the development of an entirely X-ray visible biodegradable stent (PCL-KIO3) composed of polycaprolactone (PCL) and potassium iodate via physical blending and 3D printing. The in vitro results show that the introduction of potassium iodate makes the 3D-printed PCL stents visualizable under X-ray. So far, there is inadequate study about polymeric stent visualization in vivo. Therefore, PCL-KIO3 stents are implanted into the rabbit carotid artery to evaluate the biosafety and visibility performance. During stent deployment, the visualization of the PCL-KIO3 stent effectively helps to understand the position and dilation status of stents. At 6-month follow-up, the PCL-KIO3 stent could still be observed under X-ray and maintains excellent vessel patency. To sum up, this study demonstrates that PCL-KIO3 stent may provide a robust strategy for biodegradable stent visualization.
Assuntos
Implantes Absorvíveis , Artérias Carótidas , Poliésteres , Impressão Tridimensional , Stents , Animais , Coelhos , Poliésteres/química , Artérias Carótidas/cirurgia , Raios XRESUMO
Electrospun fibers provide a promising platform for wound healing; however, they lack requisite characteristics for wound repair, including antibacterial and anti-inflammatory properties and angiogenic ability. Sodium alginate (SA) is being used for different types of applications. However, the poor spinnability of SA restricts its applications. The objectives of this study were three-fold: a) to synthesize oxidized sodium alginate (OSA) to improve its spinnability, b) to fabricate composite fibrous membranes by blending OSA along with zinc oxide nanoparticles (ZnO-NPs), and c) to decipher antibacterial and anti-inflammatory properties as well as biocompatibility of membranes in vitro and in vivo. OSA displaying different oxidation degrees (Dox (%)) was synthesized by varying the molar ratio of sodium periodate to SA. OSA (Dox, â¼48 %) afforded smooth and uniform fibers; 0.5 wt% of adipic dihydrazide (ADH) evolved into structurally stable and water-insoluble membranes. Composite fibrous membranes containing 2 wt% of ZnO-NPs displayed good biocompatibility and bactericidal effect against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) in vitro. In addition, composite membranes showed remarkable epithelialization, neovascularization, and anti-inflammatory response than that of the membranes devoid of ZnO-NPs. Conclusively, these composite fibrous membranes may have broad implications for wound healing applications.
Assuntos
Nanopartículas , Óxido de Zinco , Alginatos , Antibacterianos/farmacologia , Antibacterianos/uso terapêutico , Escherichia coli , Staphylococcus aureus , Cicatrização , Óxido de Zinco/farmacologiaRESUMO
Currently, more and more patients suffer from peripheral nerve injury due to trauma, tumor and other causes worldwide. Biomaterial-based nerve conduits are increasingly recognized as a potential alternative to nerve autografts for the treatment of peripheral nerve injury. However, an ideal nerve conduit must offer topological guidance and biochemical and electrical signal transduction mechanisms. In this work, aligned conductive nanofibrous scaffolds comprising polylactic-co-glycolic acid and multiwalled carbon nanotubes (MWCNTs) were fabricated via coaxial electrospinning, and nerve growth factor (NGF) and Lycium barbarum polysaccharides (LBP) purified from the wolfberry were loaded on the core and shell layers of the nanofibers, respectively. LBP were confirmed to accelerate long-distance axon regeneration after severe peripheral nerve injury. In addition, the synergistic promotion of LBP and NGF on nerve cell proliferation and neurite outgrowth was demonstrated. MWCNTs were introduced into the aligned fibers to further increase the electrical conductivity, which promoted the directional growth and neurite extension of neurons in vitro. Further, the combination of conductive fibrous scaffolds with electrical stimulation that mimics endogenous electric fields significantly promoted the differentiation of PC12 cells and the axon outgrowth of neurons. Based on robust cell-induced behaviors, conductive composite fibers with optimized fiber alignment may be used for the promotion of nerve recovery.
RESUMO
Massive hemorrhage may be detrimental to the patients, which necessitates the advent of new materials with high hemostatic efficiency and good biocompatibility. The objective of this research was to screen for the effect of the different types of bio-elastomers as hemostatic dressings. 3D loose nanofiber sponges were prepared; PU-TA/Gel showed promising potential. Polyurethane (PU) was synthesized and electrospun to afford porous sponges, which were crosslinked with glutaraldehyde (GA). FTIR and 1H-NMR evidenced the successful synthesis of PU. The prepared PU-TA/Gel sponge had the highest porosity and water absorption ratio. Besides, PU-TA/Gel sponges exhibited cytocompatibility, negligible hemolysis and the shortest clotting time. PU-TA/Gel sponge rapidly induced stable blood clots with shorter hemostasis time and less bleeding volume in a liver injury model in rats. Intriguingly, PU-TA/Gel sponges also induced good skin regeneration in a full-thickness excisional defect model as revealed by the histological analysis. These results showed that the PU-TA/Gel-based sponges may offer an alternative platform for hemostasis and wound healing.
RESUMO
Protein based photocrosslinking hydrogels with nanofiber dispersions were reported to be an effective wound dressing. In this study, two kinds of protein (gelatin and decellularized dermal matrix) were modified to obtain GelMA and ddECMMA, respectively. Poly(ε-caprolactone) nanofiber dispersions (PCLPBA) and thioglycolic acid-modified chitosan (TCS) were added into GelMA solution and ddECMMA solution, respectively. After photocrosslinking, four kinds of hydrogel (GelMA, GTP4, DP and DTP4) were fabricated. The hydrogels showed excellent physico-chemical property, biocompatibility and negligible cytotoxicity. When applied on the full-thickness cutaneous deficiency of SD rats, hydrogel treated groups exhibited an enhanced wound healing effect than Blank group. Besides, the histological staining of H&E and Masson's showed that hydrogels groups with PCLPBA and TCS (GTP4 and DTP4) improved wound healing. Furthermore, GTP4 group performed better healing effect than other groups, which had great potential in skin wound regeneration.
Assuntos
Hidrogéis , Nanofibras , Ratos , Animais , Hidrogéis/química , Nanofibras/química , Ratos Sprague-Dawley , Cicatrização , Pele , Gelatina/químicaRESUMO
Tendon is a bundle of tissue comprising of a large number of collagen fibers that connects muscle to bone. However, overuse or trauma may cause degeneration and rupture of the tendon tissues, which imposes an enormous health burden on patients. In addition to autogenous and allogeneic transplantation, which is commonly used in the clinic, the current research on tendon repair is focused on developing an appropriate scaffold via biomaterials and fabrication technology. The development of a scaffold that matches the structure and mechanics of the natural tendon is the key to the success of the repair, so the synergistic optimization of the scaffold fabrication technology and biomaterials has always been a concern of researchers. A series of strategies include the preparation of scaffolds by electrospinning and 3D printing, as well as the application of injectable hydrogels and microspheres, which can be used individually or in combination with cells, growth factors for tendon repair. This review introduces the tendon tissue structure, the repair process, the application of scaffolds, and the current challenges facing biomaterials, and gives an outlook on future research directions. With biomaterials and technology continuing to be developed, we envision that the scaffolds could have an important impact on the application of tendon repair.
Assuntos
Materiais Biocompatíveis , Alicerces Teciduais , Humanos , Materiais Biocompatíveis/uso terapêutico , Alicerces Teciduais/química , Engenharia Tecidual , Tendões/cirurgia , Tendões/fisiologia , Impressão TridimensionalRESUMO
Bacterial infections and poor vascularization delay wound healing, thus necessitating alternative strategies for functional wound dressings. Zinc oxide (ZnO) has been shown to exert a potent antibacterial effect against bacterial species. Similarly, Glucagon-like peptide-1 (GLP-1) analogue liraglutide (LG) has been shown to promote vascularization and improve wound healing. The objective of this research was to investigate the synergistic effect of ZnO nanoparticles (ZnO-NPs) and LG to simultaneously induce antibacterial, hemostatic, and vascularization effects for infected wound healing. Electrospun poly (l-lactide-co-glycolide)/gelatin (PLGA/Gel) membranes containing ZnO-NPs and LG displayed good biocompatibility and hemostatic ability. Both, ZnO-NPs and LG exhibited synergistic antibacterial effect against Staphylococcus aureus and Escherichia coli as well as improved the migration and tubule-like network formation of human umbilical vein endothelial cells (HUVECs) in vitro. Once evaluated in a bacterial-infected wound model in rats, the membranes loaded with ZnO-NPs and LG effectively promoted wound healing causing significant reduction in wound area and scar-like tissue formation. Therefore, ZnO-NPs/LG synergism may offer an invaluable solution for the treatment of poorly healing infected wounds.
Assuntos
Hemostáticos , Nanofibras , Óxido de Zinco , Animais , Antibacterianos/farmacologia , Bandagens , Células Endoteliais , Escherichia coli , Peptídeo 1 Semelhante ao Glucagon/farmacologia , Hemostáticos/farmacologia , Humanos , Liraglutida/farmacologia , Ratos , Cicatrização , Óxido de Zinco/farmacologiaRESUMO
Recently, various tissue engineering based strategies have been pursued for the regeneration of tracheal tissues. However, previously developed tracheal scaffolds do not accurately mimic the microstructure and mechanical behavior of the native trachea, which restrict their clinical translation. Here, tracheal scaffolds are fabricated by using 3D printing and short nanofibers (SF) dispersion of poly(l-lactide)/gelatin (0.5-1.5 wt%) to afford tracheal constructs. The results display that the scaffolds containing 1.0 wt % of SF exhibit low density, good water absorption capacity, reasonable degradation rate, and stable mechanical properties, which were comparable to the native trachea. Moreover, the designed scaffolds possess good biocompatibility and promote the growth and infiltration of chondrocytes in vitro. The biocompatibility of tracheal scaffolds is further assessed after subcutaneous implantation in mice for up to 4 and 8 weeks. Histological assessment of tracheal constructs explanted at week 4 shows that scaffolds can maintain their structural integrity and support the formation of neo-vessels. Furthermore, cell-scaffold constructs gradually form cartilage-like tissues, which mature with time. Collectively, these engineered tracheal scaffolds not only possess appropriate mechanical properties to afford a stabilized structure but also a biomimetic extracellular matrix-like structure to accomplish tissue regeneration, which may have broad implications for tracheal regeneration.
Assuntos
Nanofibras , Animais , Gelatina/farmacologia , Camundongos , Nanofibras/química , Poliésteres , Impressão Tridimensional , Engenharia Tecidual/métodos , Alicerces Teciduais/química , TraqueiaRESUMO
Degenerated cartilage tissues remain a burgeoning issue to be tackled, while bioactive engineering products available for optimal cartilage regeneration are scarce. In the present study, two-dimensional (2DS) poly(l-lactide-co-ε-caprolactone)/silk fibroin (PLCL/SF)-based scaffolds were fabricated by conjugate electrospinning method, which were then cross-linked with chondroitin sulfate (CS) to further enhance their mechanical and biological performance. Afterwards, three-dimensional (3D) PLCL/SF scaffolds (3DS) and CS-crosslinked 3D scaffolds (3DCSS) with tailored size were successfully fabricated by an in-situ gas foaming in a confined mold followed by freeze-dried. Gas-foamed scaffolds displayed high porosity, rapid water uptake, and stable mechanical properties. While all of the scaffolds exhibited good cytocompatibility in vitro; 3DCSS showed better cell seeding efficiency and chondro-protective effect compared to other scaffolds. Besides, 3DCSS scaffolds supported the formation of more mature cartilage-like tissues along with the best repair outcome in a rabbit articular cartilage defect model in vivo, as well as less expression level of pro-inflammatory cytokines, including interleukin (IL)-1ß and tumor necrosis factor (TNF)-α than that of the other groups. Taken together, 3DCSS may provide an alternative therapeutic option for cartilage tissue repair.
Assuntos
Cartilagem Articular , Sulfatos de Condroitina , Animais , Coelhos , Regeneração , Engenharia Tecidual/métodos , Alicerces TeciduaisRESUMO
ddECMMA is the methacrylating product of decellularized dermal extracellular matrix with biological signals and capable of photocrosslinking. Thiolated chitosan (TCS) is an effective antibacterial component. PCLPBA is a kind of plasma-treated polycaprolactone nanofiber dispersions (PCLP) that regulates macrophage polarization and promotes angiogenesis. In this study, we obtained ddECMMA via methacrylation reaction. TCS was prepared by reaction between chitosan and thioglycolic acid. PCLPBA was fabricated via reaction between PCLP and 3-buten-1-amine. TCS and PCLPBA were mixed in ddECMMA solution and photocrosslinked to form DTP4 hydrogel. The hydrogel showed rapid gelation, good mechanical strength, antibacterial and antioxidant properties. When it was cocultured with NIH 3T3 cells, the cells showed good morphology and proliferation rate. After applying it to the full-thickness cutaneous wound, wounds almost healed in 2 weeks via re-epithelialization and neovascularization with negligible scar tissue. The results indicate that DTP4 hydrogel is a promising candidate for clinic skin wound healing.
Assuntos
Quitosana , Nanofibras , Animais , Antibacterianos/farmacologia , Hidrogéis/farmacologia , Camundongos , Cicatrização/fisiologiaRESUMO
Guided tissue regeneration (GTR) membranes play a vital role in periodontal surgery. Recently a series of composite electrospun membranes have been fabricated to improve the unexpected biodegradation of collagen-based GTR membranes. However, their tissue integrity needs to be studied in depth. In this study, a bi-layered electrospun membrane (BEM) inspired by "prodrug" was fabricated, which contained a dense-layer (BEM-DL) and a potential loose-layer (BEM-LL). The nanofibers of BEM-DL were composed of poly(l-lactic-co-glycolic acid) and tilapia skin collagen (TSC). Whereas the BEM-LL consisted of two types of nanofibers, one was the same as BEM-DL and the other was made from TSC. The morphology, degradation in vitro, cytocompatibility and biocompatibility in rats were investigated with a poly(lactic-co-glycolic acid) electrospun membrane (PLGA) as the negative control. The pore size of BEM-LL soaked for 7 days became larger than the original sample (164.8 ± 90.9 and 52.5 ± 21.0 µm2 , respectively), which was significantly higher (p < .05) than that of BEM-DL and PLGA. The BEM-LL displayed a larger weight loss rate of 82.3 ± 3.6% than the BEM-DL of 46.0 ± 2.8% at day 7 because of the rapid degradation of TSC fibers. The cytocompatibility test demonstrated that L929 cells were only spread on the surface of the BEM-DL while MC3T3-E1 cells grew into the BEM-LL layer. The subcutaneous implantation test further proved that BEM-DL performed as a cellular barrier, whereas BEM-LL was conducive to cell infiltration as deep as 200 µm with reduced fibrous encapsulation. Herein, the BEM inspired by "prodrug" is a promising GTR membrane with a property of enhanced tissue integration.
Assuntos
Regeneração Tecidual Guiada , Nanofibras , Pró-Fármacos , Animais , Materiais Biocompatíveis , Colágeno/farmacologia , Ácido Láctico/farmacologia , Copolímero de Ácido Poliláctico e Ácido Poliglicólico/farmacologia , Ratos , Alicerces TeciduaisRESUMO
Repairing irregular-shaped bone defects poses enormous challenges. Scaffolds that can fully fit the defect site and simultaneously induce osteogenesis and angiogenesis hold great promise for bone defect healing. This study aimed to produce superelastic organic/inorganic composite aerogel scaffolds by blending silica nanofibers (SiO2 ) and poly (lactic acid)/gelatin (PLA/gel) nanofibers; the content of SiO2 nanofibers is varied from 0-60 wt% (e.g., PLA/gel, PLA/gel/SiO2 -L, PLA/gel/SiO2 -M, and PLA/gel/SiO2 -H for 0%, 20%, 40%, and 60% of SiO2 nanofibers, respectively) to produce a range of scaffolds. The PLA/gel/SiO2 -M scaffold has excellent elasticity and good mechanical properties. In vitro experiments demonstrate that the silicon ions released from PLA/gel/SiO2 -M scaffolds promote the differentiation of rat bone marrow-derived mesenchymal stem cells into osteoblasts, enhancing alkaline phosphatase activity and bone-related genes expressions. The released silicon ions also promote the proliferation of human umbilical vein endothelial cells and the expression of vascular endothelial growth factors, thereby promoting angiogenesis. The assessment of these scaffolds in a calvarial defect model in rats shows good potential of PLA/gel/SiO2 -M to induce bone regeneration as well as promote osteogenesis and angiogenesis. Overall, these organic/inorganic composite scaffolds have good biological activity, which may have broad applications for tissue engineering.
Assuntos
Nanofibras , Animais , Regeneração Óssea , Diferenciação Celular , Células Endoteliais , Humanos , Osteogênese , Poliésteres , Ratos , Silício , Dióxido de Silício , Engenharia Tecidual , Alicerces TeciduaisRESUMO
Polyamidoxime chelating resin was obtained from polyacrylonitrile (PAN) grafted starch. The nitrile groups of the starch-grafted polyacrylonitrile (St-g-PAN) were converted into amidoximes by reaction with hydroxylamine under basic conditions. The synthesized graft copolymer and polyamidoxime were characterized by FTIR, TGA and elemental microanalysis. Metal chelation of the polyamidoxime resin with iron, copper and zinc has been studied. The produced metal-polyamidoxime polymer complexes were used as catalysts for the oxidation of phenol using H(2)O(2) as oxidizing agent. The oxidation of phenol depends on the central metal ion present in the polyamidoxime complex. Reuse of M-polyamidoxime catalyst/H(2)O(2) system showed a slight decrease in catalytic activities for all M-polyamidoxime catalysts.
Assuntos
Peróxido de Hidrogênio/química , Metais/química , Compostos Organometálicos/química , Fenol/química , Amido/química , Catálise , Concentração de Íons de Hidrogênio , Oxirredução , Polímeros/síntese química , Polímeros/química , Reciclagem , Resinas Sintéticas/síntese química , Resinas Sintéticas/química , Espectroscopia de Infravermelho com Transformada de Fourier , Amido/síntese química , Temperatura , TermogravimetriaRESUMO
Cellulose has been one of the most widespread materials due to its renewability, excellent mechanical properties, biodegradability, high absorption ability, biocompatibility and cheapness. Novel, simple and green colorimetric fibrous film sensor was developed by immobilization of urease enzyme (U) and tricyanofuran hydrazone (TCFH) molecular probe onto cellulose nanofibers (CNF). Cellulose acetate nanofibers (CANF) were firstly prepared from cellulose acetate using the simple, green and low cost solution blowing spinning technology. The produced CANF was exposed to deacetylation to introduce CNF, which was then treated with a mixture of TCFH and urease enzyme to introduce CNF-TCFH-U nanofibrous biosensor. CNF were reinforced with tricyanofuran hyrazone molecular probe and urease enzyme was encapsulated into calcium alginate biopolymer to establish a biocomposite film. This CNF-TCFH-U naked-eye sensor can be applied as a disposable urea detector. CNF demonstrated a large surface area and was utilized as a carrier for TCFH, which is the spectroscopic probe and urease is a catalyst. The biochromic CNF-TCFH-U nanofibrous biosensor responds to an aqueous medium of urea via a visible color signal changing from off-white to dark pink. The morphology of the generated CNF and CNF-TCFH-U nanofibrous films were characterized by different analytical tools, including energy-dispersive X-ray patterns (EDX), polarizing optical microscope (POM), Fourier-transform infrared spectroscopy (FT-IR) and scanning electron microscope (SEM). SEM images of CNF-TCFH-U nanofibers demonstrated diameters between 800 nm and 2.5 µm forming a nonwoven fabric with a homogeneous distribution of TCFH/urease-containing calcium alginate nanoparticles on the surface of CNF. The morphology of the cross-linked calcium alginate nanoparticles was also explored using transmission electron microscopy (TEM) to indicate an average diameter of 56-66 nm. The photophysical performance of the prepared CNF-TCFH-U was also studied by CIE Lab coloration parameters. The nanofibrous film biosensor displayed a relatively rapid response time (5-10 min) and a limit of detection as low as 200 ppm and as high as 1400 ppm. Tricyanofuran hydrazone is a pH-responsive disperse dye comprising a hydrazone detection group. Determination of urea occurs through a proton transfer from the hydrazone group to the generated ammonia from the reaction of urea with urease.
RESUMO
Multifunctional fibrous surfaces with ultraviolet protection, self-cleaning, or antibacterial activity have been highly attractive. Nanocomposites consisting of silver (AgNPs) and titanium dioxide (TiO2 NPs) nanoparticles (Ag/TiO2) were developed and coated onto the surface of viscose fibers employing a straightforward pad-dry-cure procedure. The morphologies and elemental compositions were evaluated by scan electron microscopy (SEM), infrared spectra (FTIR), and energy-dispersion X-ray spectra (EDS). The resultant multifunctional textile materials displayed antibacterial and photo-induced catalytic properties. The photocatalyzed self-cleaning properties were investigated employing the photochemical decay of methylthioninium chloride, whereas the antibacterial properties were studied versus E. coli. The viscose fibers coated with Ag/TiO2 nanocomposite demonstrated improved efficiency compared with viscose fibers coated with pure anatase TiO2 nano-scaled particles.
RESUMO
We performed a free radical solution polymerization of new acrylonitrile (AN), styrene (St) and styrene sodium sulfonate (SSS) acceptor-donor acceptor monomer systems. The compositions and structures of the produced terpolymers were elucidated using CHNS elemental analysis, and Fourier transform infrared (FTIR) spectroscopies. Three terpolymers candidates were chosen for detailed thermal investigations, where the AN molar ratio varied almost threefold (from ~6.9% to ~17.4%) while the molar ratios of St and SSS varied slightly, at average values around 76.0% and 12.9%, respectively. The glass transition (Tg) values of the terpolymers were measured calorimetrically. In addition, thermal gravimetric analyses (TGA) of the samples were conducted in the temperature range from room temperature to 800 °C. All terpolymers exhibited a single Tg value, indicating random copolymerization of the monomeric species. TGA results revealed that variation of the AN molar ratio had a significant influence on the thermal stabilities of the terpolymers. The impact of AN contribution on the molecular dynamics of the glass transition in the terpolymers was explained quantitatively in a framework of a molecular model.