RESUMO
Sustainable development goals require a reduction in the existing heavy reliance on fossil resources. Forestry can be considered a key resource for the bioeconomy, providing timber, energy, chemicals (including fine chemicals), and various other products. Besides the main product, timber, forestry generates significant amounts of different biomass side streams. Considering the unique and highly complex chemical composition of coniferous needle/greenery biomass, biorefinery strategies can be considered as prospective possibilities to address top segments of the bio-based value pyramid, addressing coniferous biomass side streams as a source of diverse chemical substances with applications as the replacement of fossil material-based chemicals, building blocks, food, and feed and applications as fine chemicals. This study reviews biorefinery methods for coniferous tree forestry biomass side streams, exploring the production of value-added products. Additionally, it discusses the potential for developing further biorefinery strategies to obtain products with enhanced value.
Assuntos
Agricultura Florestal , Rios , Estudos Prospectivos , Biocombustíveis , Alimentos , BiomassaRESUMO
The European Union is currently in the process of transformation toward a circular economy model in which different areas of activity should be integrated for more efficient management of raw materials and waste. The wastewater sector has a great potential in this regard and therefore is an important element of the transformation process to the circular economy model. The targets of the circular economy policy framework such as resource recovery are tightly connected with the wastewater treatment processes and sewage sludge management. With this in view, the present study aims to review existing indicators on resource recovery that can enable efficient monitoring of the sustainable and circular solutions implemented in the wastewater sector. Within the reviewed indicators, most of them were focused on technological aspects of resource recovery processes such as nutrient removal efficiency, sewage sludge processing methods and environmental aspects as the pollutant share in the sewage sludge or its ashes. Moreover, other wide-scope indicators such as the wastewater service coverage or the production of bio-based fertilizers and hydrochar within the wastewater sector were analyzed. The results were used for the development of recommendations for improving the resources recovery monitoring framework in the wastewater sector and a proposal of a circularity indicator for a wastewater treatment plant highlighting new challenges for further researches and wastewater professionals.
Assuntos
Águas Residuárias , Purificação da Água , Fertilizantes , Fósforo , Esgotos , Eliminação de Resíduos LíquidosRESUMO
Microplastics are one of the major contaminants of aquatic nature where they can interact with organic and inorganic pollutants, including trace metals, and adsorb them. At the same time, after the microplastics have entered the aquatic environments, they are quickly covered with a biofilm - microorganisms which are able to produce extracellular polymeric substances (EPS) that can facilitate sorption of trace metals from surrounding water. The microbial community of biofilm contains bacteria which synthesizes EPS with antimicrobial activity making them more competitive than other microbial inhabitants. The trace metal trapping by bacterial EPS can inhibit the development of certain microorganisms, therefore, a single microparticle participates in complex interactions of the diverse elements surrounding it. The presented review aims to consider the variety of interactions associated with the adsorption of trace metal ions on the surface of microplastics covered with biofilm, the fate of such microplastics and the ever-increasing risk to the environment caused by the combination of these large-scale pollutants - microplastics and trace metals. Since aquatic pollution problems affect the entire planet, strict regulation of the production, use, and disposal of plastic materials is needed to mitigate the effects of this emerging pollutant and its complexes could have on the environment and human health.
Assuntos
Poluentes Ambientais , Oligoelementos , Poluentes Químicos da Água , Biofilmes , Humanos , Microplásticos , Plásticos , Poluentes Químicos da Água/análiseRESUMO
Berries represent one of the most important and high-valued group of modern-day health-beneficial "superfoods" whose dietary consumption has been recognized to be beneficial for human health for a long time. In addition to being delicious, berries are rich in nutrients, vitamins, and several bioactive compounds, including carotenoids, flavonoids, phenolic acids, and hydrolysable tannins. However, due to their high value, berries and berry-based products are often subject to fraudulent adulteration, commonly for economical gain, but also unintentionally due to misidentification of species. Deliberate adulteration often comprises the substitution of high-value berries with lower value counterparts and mislabeling of product contents. As adulteration is deceptive toward customers and presents a risk for public health, food authentication through different methods is applied as a countermeasure. Although many authentication methods have been developed in terms of fast, sensitive, reliable, and low-cost analysis and have been applied in the authentication of a myriad of food products and species, their application on berries and berry-based products is still limited. The present review provides an overview of the development and application of analytical chemistry methods, such as isotope ratio analysis, liquid and gas chromatography, spectroscopy, as well as DNA-based methods and electronic sensors, for the authentication of berries and berry-based food products. We provide an overview of the earlier use and recent advances of these methods, as well as discuss the advances and drawbacks related to their application.
Assuntos
Flavonoides , Frutas , Dieta , HumanosRESUMO
Water pollution due to industrial processes has necessitated and spurred robust research into the development of adsorbent materials for remediation. Polyphenylenediamines (PPD) have attracted significant attention because of their dual cationic and redox properties. They are able to reduce Cr(VI) to Cr(III) in solution. Interrogation of the chemical processes involved in the Cr(VI) adsorption on para-PPD was primarily by X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FT-IR) spectroscopy. It was confirmed that the underlying oxidation of the amino groups to imines during the reduction of Cr(VI) to Cr(III) was irreversible. This process occurred at both acidic and alkaline conditions. Reduction was accompanied by Cr(III) chelation on the adsorbent surface. Further, regeneration with dilute aqueous NaOH and HCl extended the polymer's adsorptive capacity beyond exhaustion of its redox potentials.
Assuntos
Cromo/química , Fenilenodiaminas/química , Poluentes Químicos da Água/química , Purificação da Água/métodos , Adsorção , Cromo/análise , Concentração de Íons de Hidrogênio , Fenilenodiaminas/análise , Espectroscopia de Infravermelho com Transformada de Fourier , Poluentes Químicos da Água/análiseRESUMO
The increasing industrial use of thallium has raised the need for removal of this highly toxic element from wastewater. Thallium is more toxic than cadmium, copper, zinc, lead and mercury and as it is easily accumulated in humans, animals and plants, it poses a threat to both the environment and human health. Peat has been used as an effective, relatively cheap and easily available sorbent to treat waters containing heavy metals. In this study, peat was characterized and used as sorbent for the removal of Tl(I) ions from aqueous solution. The effect of initial Tl(I) concentration, pH, contact time, temperature and ionic strength was studied in batch mode. The maximum sorption capacity of peat reached 24.14 mg/g at 20 °C and initial Tl(I) concentration of 500 mg/L. Sorption capacity was found to be pH dependent and maximum uptake occurred at pH 10. Kinetic data revealed that sorption was relatively rapid - 82.8% of Tl(I) ions were sorbed in the first 10 min. The kinetics of sorption was analyzed using pseudo-first order and pseudo-second order models. Results show that peat can be used as an effective sorbent to remove Tl(I) ions from aqueous solutions.
Assuntos
Solo/química , Tálio/isolamento & purificação , Poluentes Químicos da Água/isolamento & purificação , Adsorção , Concentração de Íons de Hidrogênio , Cinética , Modelos Químicos , Concentração Osmolar , Temperatura , Purificação da ÁguaRESUMO
Arsenic contamination of water is a major problem worldwide. A possible solution can be approached through developing new sorbents based on cost-effective and environmentally friendly natural biomaterials. We have developed new sorbents based on biomaterial impregnation with iron oxyhydroxide. In this study, raw peat material, iron-modified peat, iron-modified biomass (shingles, straw, sands, cane and moss) as well as iron humate were used for the removal of arsenate from contaminated water. The highest sorption capacity was observed in iron-modified peat, and kinetic studies indicated that the amount of arsenic sorbed on this material exceeds 90 % in 5 h. Arsenate sorption on iron-modified peat is characterised by the pseudo-second-order mechanism. The results of arsenic sorption in the presence of competing substances indicated that sulphate, nitrate, chloride and tartrate anions have practically no influence on As(V) sorption onto Fe-modified peat, whereas the presence of phosphate ions and humic acid significantly lowers the arsenic removal efficiency.
Assuntos
Arsênio/química , Compostos de Ferro/química , Poluentes Químicos da Água/química , Poluição Química da Água/prevenção & controle , Purificação da Água/métodos , Adsorção , Arseniatos/análise , Arseniatos/química , Arsênio/análise , Biomassa , Substâncias Húmicas , Cinética , Solo/química , Poluentes Químicos da Água/análise , Poluição Química da Água/análiseRESUMO
The current paper involves overview of several studies concerning quantitative major and trace element analysis of different food samples, such as products of plant origin, e.g., locally grown vegetables (carrots, onions, potatoes) and products of animal origin derived with or without processing (cottage cheese, eggs, honey). Food samples were collected over the territory of Latvia in the time period 2009-2012. Sample pre-treatment was chosen according to the product specifics but mostly wet mineralization with concentrated nitric acid was applied. Analysis of major elements (e.g., Ca, Fe, K, Mg, Na) and trace elements (e.g., As, Cd, Co, Cr, Cu, Ni, Pb, Se, Zn) was performed by appropriate quantitative analytical technique: atomic absorption spectrometry, inductively coupled plasma mass spectrometry or total reflection X-ray fluorescence spectrometry. Not only the influence of environmental factors (e.g., geographical or seasonal impact) was detected in element dissemination in food, also botanical origin (if applicable) and applied agricultural praxis, product processing and storage specifics were found to be important. Possible food contamination by potentially toxic elements can be associated mostly with the consequences of anthropogenic activities. The studies revealed the significance of food research in the context of environmental science.
Assuntos
Análise de Alimentos , Contaminação de Alimentos/análise , Poluentes do Solo/análise , Oligoelementos/análise , Meio Ambiente , Análise de Alimentos/métodos , Letônia , Estações do Ano , Espectrometria por Raios X , Espectrofotometria AtômicaRESUMO
The growing use and transport of crude oil and oil products has led to increasing numbers of oil spillages of various scales. Oil sorbents have been extensively used for remediation of the consequences of such accidents. The aim of this study is to investigate the possible use of peat and its thermal treatment products for oil sorption. Peat as an oil sorbent has poor buoyancy characteristics, relatively low oil sorption capacity and low hydrophobicity. However, thermal treatment (low-temperature pyrolysis and synthesis of peat-based activated coal) helps to significantly improve its sorptive characteristics. Peat is a potential material for oil sorption because it has such advantages as low cost, biodegradability and relatively high parameters of specific surface area and porosity. The processes and structural changes taking place during low-temperature pyrolysis have been studied by means of IR spectroscopy, thermogravimetry and scanning electron microscopy.
Assuntos
Recuperação e Remediação Ambiental/métodos , Petróleo/análise , Poluentes do Solo/isolamento & purificação , Solo/química , Adsorção , Análise Diferencial Térmica , Temperatura Alta , Cinética , Poluentes do Solo/análise , Poluentes do Solo/químicaRESUMO
This study revealed significant (P < 0.1 and P < 0.05) increasing trends of total organic carbon (TOC) and water colour in most of the studied Latvian rivers during the last decade. However, over longer time periods, there were pronounced oscillations of TOC concentrations, similar to patterns of long-term changes of river discharge regime. On a yearly basis, there was a positive correlation between parameters of organic matter concentration and discharge in all selected rivers (r (S) = 0.540-0.803; P < 0.01). The impact of discharge on concentrations of organic matter could be masked by other factors, such as changes in precipitation, biological processes, soil types or land use.
Assuntos
Carbono/análise , Rios/química , Solo/análise , Poluentes Químicos da Água/análise , Poluição Química da Água/estatística & dados numéricos , Monitoramento Ambiental , LetôniaRESUMO
Procyanidins are a polyphenolic group that can be found in a variety of foods such as chocolate, tea, cranberries and others. Type A procyanidins can be found in a handful of sources and one of the richest sources are American cranberries. These compounds possess antioxidative, anticancer and anti-inflammatory activities and are most widely used as prevention for urinary tract infections. Cranberries are utilized for jam and juice production, and the latter produces industrial food waste press residues. Press residues contain free and bound procyanidins which can be extracted for use as nutraceuticals. In this study, the extraction of cranberry press residues has been optimized using RSM and the resulting extracts have been purified and fractionated. The obtained procyanidin fractions have been investigated for their antioxidative potential and analyzed using LC-ESI-FTICR-HRMS to determine individual procyanidins. The optimization showed that the optimal extraction can be conducted using acetone in a concentration of 53% without the addition of an acidifying agent. Strong correlation was observed for procyanidin contents and their antioxidative activity using DPPH, ABTS and FRAP methods. The purified fractions contained 78 individual (65 Type A) procyanidins with the degree of polymerization of up to 9.
RESUMO
Cuticle is the first layer protecting plants against external biotic and abiotic factors and is responsive to climatic factors as well as determined by genetic adaptations. In this study, the chemical composition of bilberry fruit cuticular wax was investigated through a latitudinal gradient from Latvia (56°N 24°E) through Finland (65°N 25°E) to northern Norway (69°N 18°E) in two seasons 2018 and 2019. Changes in the major cuticular wax compounds, including triterpenoids, fatty acids, alkanes, aldehydes, ketones, and primary alcohols, were detected by GC-MS analysis. Generally, a decreasing trend in the proportion of triterpenoids from southern to northern latitudes, accompanied with an increase in proportion of fatty acids, aldehydes, and alkanes, in bilberry fruit cuticular wax was observed. A correlation analysis between climatic factors with proportion of wax compounds indicated that temperature was the main factor affecting the cuticular wax composition in bilberries. A controlled phytotron experiment with southern and northern bilberry ecotypes confirmed the major effect of temperature on bilberry fruit cuticular wax load and composition. Elevated temperature increased wax load most in berries of northern ecotypes. The level of triterpenoids was higher, while levels of fatty acids and alkanes were lower, in wax of bilberry fruits ripened at 18°C compared to 12°C in both northern and southern ecotypes. Based on our results, it can be postulated that the predicted increase in temperature due to climate change leads to alterations in fruit cuticular wax load and composition. In northern ecotypes, the alterations were especially evident.
RESUMO
The data presented in this article are related to the research paper "Granulation of fly ash and biochar with organic lake sediments - A way to sustainable utilization of waste from bioenergy production" [1] in the context of waste material investigation and possible valorization instead of disposal. This article provides a comprehensive chemical and physical characterization of wood combustion products - fly ashes, bottom ashes, mixed ashes and biochar. Multiple analytical techniques and methodology were exploited to investigate the composition of wood combustion products, among them a loss on ignition, potentiometry, colorimetry, X-ray diffractometry, X-ray fluorescence spectrometry, inductively coupled plasma optical emission spectrometry, gas chromatography. General parameters detected were the content of dry matter, gravimetric water, volatile matter, amount of ash and fixed carbon. The elemental analysis involved determining C, H, N and O. Physical properties were described by bulk density, solid density, total porosity, electric conductivity, specific weight and mass ratio assessment of particle size distribution. The mineralogical composition was described by major crystalline phases of samples and content of oxides. Chemical properties and composition were characterized by pH, the content of ammonium, nitrates, nitrites, exchangeable elements and cation exchange capacity as well as after the 3-step speciation and analytical quantification of trace and major elements (Al, As, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Mo, Na, Ni, P, Pb, Sb, Se, Sr, Ti, Tl, V and Zn) and detection of polycyclic aromatic hydrocarbons.
RESUMO
Contamination associated with metals is a critical concern related to their toxicity, persistence, and bio-accumulation. Trace elements are partitioned into several chemical forms, which some are more labile during fluctuations in the environment. Studying the distribution of metals between the different chemical fractions contributes to assess their bioavailability and to identify their potential risk of contamination to surrounding environments. This study concerns the speciation of metals (Pb, Cr, Ni, Zn and Fe) from sediments coming out from Malmfjärden bay, Sweden. The aim was to assess the potential risk of metal pollution during present and future dredging as well as while using dredged sediments in beneficial uses. The Tessier speciation procedure was chosen, and the results showed that low concentrations of metals were associated with the exchangeable fraction. In contrast, the major concentrations were linked to the residual part. The risk indexes (contamination factor and risk assessment code) showed that, during dredging activities, there is a low concern of pollution for Cr, Ni and Fe and a medium risk for Pb and Zn. Additionally, in all elements, the sum of non-residual concentrations was below the Swedish limits for using dredged sediments in sensitive lands. The findings suggested that the investigated metals in Malmfjärden sediments are related to low risks of spreading during using in beneficial uses.
Assuntos
Metais Pesados , Poluentes Químicos da Água , Monitoramento Ambiental , Sedimentos Geológicos , Metais Pesados/análise , Medição de Risco , Suécia , Poluentes Químicos da Água/análiseRESUMO
Vaccinium genus berries-wild bilberries (Vaccinium myrtillus L.) and cultivated highbush blueberries (Vaccinium corymbosum L.)-are consumed worldwide, and their consumption has a trend of stable increase. Thus, considering their wide use in ethnomedicine, for juice and jam production, as functional food, as well as their use in preparations of extracts which have application potential in pharmaceutical and cosmetics industries, studies regarding the composition of these berries are of special importance. The aim of this study is to characterise the elemental and isotopic composition, as well as variation in element concentration in bilberries gathered from different sites in Northern Europe and in commercially available blueberry samples from across the World. Furthermore, our aim was to develop tools for authenticity and quality control of these berries. The elemental composition of berries was analysed using inductively coupled plasma with optical emission detection (ICP-OED), while isotope ratio mass spectrometry (IRMS) was used for the determination of isotope ratio values. The results demonstrated detectable differences between macro- and microelement values in bilberries. IRMS analysis of blueberries revealed significant differences in isotope ratios based on the place of origin, indicating the possibility to use this analytical method for authenticity testing. In none of the samples, pollution was detected, even though there were indications of different growth conditions and geochemical differences affecting bilberry composition.
RESUMO
In this study, cuticular wax load, its chemical composition, and biosynthesis, was studied during development of wild type (WT) bilberry fruit and its natural glossy type (GT) mutant. GT fruit cuticular wax load was comparable with WT fruits. In both, the proportion of triterpenoids decreased during fruit development concomitant with increasing proportions of total aliphatic compounds. In GT fruit, a higher proportion of triterpenoids in cuticular wax was accompanied by a lower proportion of fatty acids and ketones compared to WT fruit as well as lower density of crystalloid structures on berry surfaces. Our results suggest that the glossy phenotype could be caused by the absence of rod-like structures in GT fruit associated with reduction in proportions of ketones and fatty acids in the cuticular wax. Especially CER26-like, FAR2, CER3-like, LTP, MIXTA, and BAS genes showed fruit skin preferential expression patterns indicating their role in cuticular wax biosynthesis and secretion.
Assuntos
Antocianinas/química , Vaccinium myrtillus/química , Ceras/química , Ácidos Graxos/análise , Ácidos Graxos/química , Frutas/química , Frutas/metabolismo , Microscopia Eletroquímica de Varredura , Extratos Vegetais , Vaccinium myrtillus/metabolismo , Vaccinium myrtillus/ultraestruturaRESUMO
BACKGROUND: Climate change is a problem which is global in nature, and whose effects go across a wide range of disciplines. It is therefore important that this theme is taken into account as part of universities´ teaching and research programs. METHODS: A three-tiered approach was used, consisting of a bibliometric analysis, an online survey and a set of case studies, which allow a profile to be built, as to how a sample of universities from 45 countries handle climate change as part of their teaching programs. RESULTS: This paper reports on a study which aimed at identifying the extent to which matters related to climate change are addressed within the teaching and research practices at universities, with a focus on the training needs of teaching staff. It consists of a bibliometric analysis, combined with an online worldwide survey aimed at ascertaining the degree of involvement from universities in reducing their own carbon footprint, and the ways they offer training provisions on the topic. This is complemented by a set of 12 case studies from universities round the world, illustrating current trends on how universities handle climate change. Apart from reporting on the outcomes of the study, the paper highlights what some universities are doing to handle climate issues, and discusses the implications of the research. CONCLUSIONS: The paper lists some items via which universities may better educate and train their students on how to handle the many challenges posed by climate change. SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1186/s12302-021-00552-5.
RESUMO
The outer-most layer of plant surface, the cuticle, consists of epi- and intra-cuticular wax. It protects the plant from dehydration, extreme temperatures and UV radiation, as well as attacks from pests such as molds and bacteria. Berry cuticular waxes are studied to understand the metabolism character (factors affecting wax layer composition in different berry species) and increase the microbial resistance and shelf life of berries. The aim of this study was analysis of the surface wax composition of nine species of wild and cultivated berries from Northern Europe. Cuticular wax analysis were done using gas chromatography-mass spectrometry. A total of 59 different compounds were identified belonging to nine groups of compounds, namely, alkanes, phytosterols, alcohols, fatty acids, phenolic acids, ketones, aldehydes, esters and tocopherols. The analyzed blueberries had the highest amount of wax present on their surface (0.9 mg berry-1), triterpenoids were the main wax constituent in these berries, with up to 62% wax composition. Berry species and varieties were compared based on their surface wax composition-similarities were found between different blueberry varieties; however, other berries showed differences based on concentration and composition of cuticular wax.
RESUMO
The development of pyro-gasification technologies makes necessary the development of new express analytical methods that are able to deal with the variability of feedstock and problems arising from it. Thermogravimetric proximate analysis of refuse derived fuels is a very fast, cheap and simple method for the determination of proximate and fractional composition. Development of this analytical approach may result in a very cost-effective method to describe wholesome composition and characteristics of feedstock used for pyrolysis and gasification processes in real time. The aim of this study was the development of such analytical method. Refuse derived fuel samples produced in Latvia and Estonia analysed during this study with thermogravimetric proximate analysis and standard methods. Equations for determination of gross calorific value and elemental composition from thermogravimetric proximate analysis were developed. Furthermore, results show that also signals pointing to excessive proportion of chlorine and fluorine can be obtained, using this method. The results obtained during this study can help to develop the automatic feedstock quality control systems for modern thermal processing technologies used in waste management.
Assuntos
Resíduos de Alimentos , Eliminação de Resíduos , Gerenciamento de ResíduosRESUMO
BACKGROUND: Anthocyanidins are plant phytochemicals found at high concentrations in berries, vegetables and flowers. Anthocyanidins have been extensively investigated due to their antioxidative, antidiabetic and anti-inflammatory effects. Few studies show that anthocyanidins decrease obesity and improve bone density. However, the effects of anthocyanidins on tissue regeneration have not been sufficiently clarified. Human mesenchymal stem cells (MSCs) are multipotent adult stem cells responsible for the regeneration of fat, bone and cartilage. Although MSCs are often used for screening of biologically active compounds, so far, the effect of anthocyanidins on MSC differentiation has not been addressed. PURPOSE: The aim of this study was to analyse the effect of anthocyanidins malvidin, cyanidin and delphinidin on adipose tissue-derived MSC differentiation into adipocytes, osteocytes and chondrocytes. STUDY DESIGN AND METHODS: Differentiation into adipocytes, osteocytes and chondrocytes was carried out in the defined cell culture conditions in the presence or absence of malvidin, cyanidin and delphinidin. The differentiation was confirmed by cytochemical staining and tissue-specific gene and protein expression. Antiobesity and anti-diabetes drug liraglutide was used as a reference drug in this study. RESULTS: Delphinidin inhibited MSC adipogenesis and downregulated FABP4 and adiponectin genes. Malvidin induced a significantly higher accumulation of calcium deposits in MSCs comparing to untreated MSCs, as well as upregulated the osteocyte-specific gene BMP-2 and Runx-2 expression and induced BMP-2 secretion. Cyanidin and delphinidin demonstrated a chondrogenesis stimulating effect by upregulation of Col2a1 and aggrecan. CONCLUSION: Altogether, our data show that anthocyanidins malvidin, cyanidin and delphinidin exert favourable effects on MSC osteogenesis and chondrogenesis whereas delphinidin inhibits adipogenesis. These results suggest that anthocyanidin effects on tissue regeneration could be further analysed in depth in vivo.