Ready, Set, Grow: From Micelles to Giant Vesicles via Biocatalytic Activation.

Controlling physicochemical processes that drive changes in supramolecular aggregates is an important objective toward creating artificial soft micro- and nanomachines. Previous research explored the morphology control of membrane-based materials subjected to externally imposed chemical stimuli. Here, we modulate the microscale morphology of pH-responsive assemblies by using biocatalysis to internally generate changes in global pH. Catalytic reactions offer flexibility in the mechanism and rate at which stimuli are introduced to responsive assemblies, ultimately enabling precision and control over size and morphology. We observed, by dynamic light scattering and fluorescence microscopy, substantial microscale differences between assemblies subjected to manually titrated pH changes compared to biocatalytically activated pH changes, including the growth of giant vesicles from micelles. Coarse-grained molecular dynamics simulations of these metastable self-assembled structures provided insight into the thermodynamics and kinetics of the preferred structures. These results demonstrate the feasibility of using biocatalytic reactions to modulate the size and morphology of supramolecular assemblies, from micelles to giant vesicles.

Active control of equilibrium, near-equilibrium, and far-from-equilibrium colloidal systems.

The development of top-down active control over bottom-up colloidal assembly processes has the potential to produce materials, surfaces, and objects with applications in a wide range of fields spanning from computing to materials science to biomedical engineering. In this review, we summarize recent progress in the field using a taxonomy based on how active control is used to guide assembly. We find there are three distinct scenarios: (1) navigating kinetic pathways to reach a desirable equilibrium state, (2) the creation of a desirable metastable, kinetically trapped, or kinetically arrested state, and (3) the creation of a desirable far-from-equilibrium state through continuous energy input. We review seminal works within this framework, provide a summary of important application areas, and present a brief introduction to the fundamental concepts of control theory that are necessary for the soft materials community to understand this literature. In addition, we outline current and potential future applications of actively-controlled colloidal systems, and we highlight important open questions and future directions.

Adsorption and fusion of hybrid lipid/polymer vesicles onto 2D and 3D surfaces.

We investigated the formation of hybrid lipid/polymer (1,2-dioleoyl-sn-glycero-3-phosphocholine and poly(ethylene oxide-b-butadiene); DOPC/EO22Bd37) films onto planar silica surfaces. Using laser scanning confocal microscopy, atomic force microscopy, and quartz crystal microbalance analysis, we monitored the adsorption and fusion of hybrid lipid/polymer vesicles onto planar borosilicate glass cleaned via chemical etching or RF/air plasma treatment. In addition we used cryo-electron microscopy to characterize film formation on mesoporous silica nanoparticles. As the polymer content in the vesicles increased, the resulting hybrid lipid/polymer films on borosilicate glass - cleaned by chemical etching or plasma treatment - were more heterogeneous, indicating a large number of adsorbed vesicles rather than continuous bilayer films at higher polymer loadings. The observed lateral fluidity of both DOPC and hybrid lipid/polymer films also decreased substantially with increasing polymer fraction and was found to be relatively insensitive to changes in pH. Films prepared from vesicles with higher polymer loadings were completely immobile. We also found that polymer vesicles did not interact with clean plasma-treated glass surfaces, which may be due to elevated OH and Si-OH on plasma-treated surfaces. Conformal hybrid lipid/polymer coatings consistent with bilayers could be formed on mesoporous silica nanoparticles and imaged via cryo-electron microscopy. These results expand the library of biocompatible materials that can be used for coating silica-based materials and nanoparticles.

Room-temperature ferroelectricity in supramolecular networks of charge-transfer complexes.

Materials exhibiting a spontaneous electrical polarization that can be switched easily between antiparallel orientations are of potential value for sensors, photonics and energy-efficient memories. In this context, organic ferroelectrics are of particular interest because they promise to be lightweight, inexpensive and easily processed into devices. A recently identified family of organic ferroelectric structures is based on intermolecular charge transfer, where donor and acceptor molecules co-crystallize in an alternating fashion known as a mixed stack: in the crystalline lattice, a collective transfer of electrons from donor to acceptor molecules results in the formation of dipoles that can be realigned by an external field as molecules switch partners in the mixed stack. Although mixed stacks have been investigated extensively, only three systems are known to show ferroelectric switching, all below 71 kelvin. Here we describe supramolecular charge-transfer networks that undergo ferroelectric polarization switching with a ferroelectric Curie temperature above room temperature. These polar and switchable systems utilize a structural synergy between a hydrogen-bonded network and charge-transfer complexation of donor and acceptor molecules in a mixed stack. This supramolecular motif could help guide the development of other functional organic systems that can switch polarization under the influence of electric fields at ambient temperatures.

Salt, shake, fuse--giant hybrid polymer/lipid vesicles through mechanically activated fusion.

Large (200 nm) poly(ethylene oxide)-b-poly(butadiene) polymer vesicles fuse into giant (>1 µm) vesicles with mild agitation in dilute aqueous NaCl solutions. This unusual effect is attributed to the salt-induced contraction of the poly(ethylene oxide) corona, reducing steric resistance between vesicles and, with agitation, increasing the probability of contact between the hydrophobic cores of adjacent membranes. In addition, NaCl and agitation facilitated the creation of giant hybrid vesicles from much smaller homogeneous polymersomes and liposomes. Whereas lipid vesicles do not readily fuse with each other under the same circumstances, they did fuse with polymersomes to produce hybrid polymer/lipid vesicles.

Microcontact click printing for templating ultrathin films of metal-organic frameworks.

The controlled growth of metal-organic frameworks (MOFs) over surfaces has been investigated using a variety of surface analytical techniques. The use of microcontact printing to prepare surfaces, patterned with regions capable of nucleating the growth of MOFs, has been explored by employing copper-catalyzed alkyne-azide cycloaddition (CuAAC) to pattern silicon wafers with carboxylic acids, a functional group that has been shown to nucleate the growth of MOFs on surfaces. Upon subjecting the patterned silicon surfaces to solvothermal conditions, MOF thin films were obtained and characterized subsequently by AFM, SEM, and grazing-incidence XRD (GIXRD). Large crystals (∼0.5 mm) have also been nucleated, as indicated by the presence of a bas-relief of the original pattern on one surface of the crystal, suggesting that it is possible to transfer the template surface pattern onto a single crystal of a MOF.

Degenerate [2]rotaxanes with electrostatic barriers.

A synthetic approach to the preparation of [2]rotaxanes (1-5·6PF(6)) incorporating bispyridinium derivatives and two 1,5-dioxynaphthalene (DNP) units situated in the rod portions of their dumbbell components that are encircled by a single cyclobis(paraquat-p-phenylene) tetracationic (CBPQT(4+)) ring has been developed. Since the π-electron-deficient bispyridinium units are introduced into the dumbbell components of the [2]rotaxanes 1-5·6PF(6), there are Coulombic charge-charge repulsions between these dicationic units and the CBPQT(4+) ring in the [2]rotaxanes. Thus, the CBPQT(4+) rings in the degenerate [2]rotaxanes exhibit slow shuttling between two DNP recognition sites on the (1)H NMR time-scale on account of the electrostatic barrier posed by the bispyridinium units, as demonstrated by variable-temperature (1)H NMR spectroscopy. Electrochemical experiments carried out on the [2]rotaxanes 1·6PF(6) and 2·6PF(6) indicate that the one-electron reduced bipyridinium radical cation in the dumbbell components of the [2]rotaxanes serves as an additional recognition site for the two-electron reduced CBPQT(2(˙+)) diradical cationic ring. Under appropriate conditions, the ring components in the degenerate rotaxanes 1·6PF(6) and 2·6PF(6) can shuttle along the recognition sites--two DNP units and one-electron reduced bipyridinium radical cation--under redox control.

Hybrid Lipid-Polymer Bilayers: pH-Mediated Interactions between Hybrid Vesicles and Glass.

One practical approach towards robust and stable biomimetic platforms is to generate hybrid bilayers that incorporate both lipids and block co-polymer amphiphiles. The currently limited number of reports on the interaction of glass surfaces with hybrid lipid and polymer vesicles-DOPC mixed with amphiphilic poly(ethylene oxide-b-butadiene) (PEO-PBd)-describe substantially different conclusions under very similar conditions (i.e., same pH). In this study, we varied vesicle composition and solution pH in order to generate a broader picture of spontaneous hybrid lipid/polymer vesicle interactions with rigid supports. Using quartz crystal microbalance with dissipation (QCM-D), we followed the interaction of hybrid lipid-polymer vesicles with borosilicate glass as a function of pH. We found pH-dependent adsorption/fusion of hybrid vesicles that accounts for some of the contradictory results observed in previous studies. Our results show that the formation of hybrid lipid-polymer bilayers is highly pH dependent and indicate that the interaction between glass surfaces and hybrid DOPC/PEO-PBd can be tuned with pH.

Heterogeneous catalysis of a copper-coated atomic force microscopy tip for direct-write click chemistry.

We report a constructive scanning probe lithography method that uses heterogeneous copper-coated atomic force microscopy tips to catalyze azide-alkyne cycloadditions (CuAAC) between solvated terminal alkyne molecules and azide-terminated self-assembled monolayers on silicon surfaces. Spatially controlled surface functionalization was carried out successfully with 50 mM ethanolic solutions of small molecules bearing terminal alkyne groups--propargylamine, 4-pentynoic acid, and an alkynyl-oligoethyleneoxide. We observed that reaction occurs only where the copper tip is in contact with an azide-terminated surface resulting in features with linewidths on the order of 50 nm. The extent of surface functionalization, as measured by changes in surface topography and lateral force microscopy, depends on the scanning force (31-350 nN) and scanning speed, with significant surface patterning observed even at speeds as high as 64 microm/s. In contrast with related SPL techniques, this approach affords a direct-write lithographic approach to constructively modifying and patterning surfaces at the nanoscale without the need for auxiliary reagents. All that is required is (1) an azide surface, (2) a solution of a terminal alkyne, and (3) a copper-coated AFM tip. These advantages allow the direct attachment of a potentially limitless library of molecules that bear terminal alkyne functionalities, including biomolecules, under relatively mild conditions, with sub-100 nm spatial resolution.

Atmospheric heterogeneous stereochemistry.

While many biogenic and anthropogenic organic constituents in the atmosphere are surface-active and chiral, the role of stereochemistry in heterogeneous oxidation chemistry in the atmosphere has not yet been evaluated. Here, we present nonlinear vibrational surface spectra of fused silica substrates functionalized with quinuclidine diastereomers during exposure to 10(11) to 10(13) molecules of ozone per cm(3) in 1 atm helium to model ozone-limited and ozone-rich tropospheric conditions. Kinetic studies show that diastereomers that orient their reactive C=C double bonds toward the gas phase exhibit heterogeneous ozonolysis rate constants that are 2 times faster than diastereomers that orient their C=C double bonds away from the gas phase. Insofar as our laboratory model studies are representative of real world environments, our studies suggest that the propensity of aerosol particles coated with chiral semivolatile organic compounds to react with ozone may depend on stereochemistry. We expect that the differences in chemical accessibility will lead to the enrichment of one oxidation product stereoisomer over the other. The oxidation products could be gaseous or surface-bound, indicating that kinetic resolution could lead to the stereochemical enrichment of the gas phase or the aerosol, which may have also been important in prebiotic chemistry. Implications of these results for chiral markers that would allow for source appointments of anthropogenic versus biogenic carbon emissions are discussed.

A push-button molecular switch.

The preparation, characterization, and switching mechanism of a unique single-station mechanically switchable hetero[2]catenane are reported. The facile synthesis utilizing a "threading-followed-by-clipping" protocol features Cu(2+)-catalyzed Eglinton coupling as a mild and efficient route to the tetrathiafulvalene-based catenane in high yield. The resulting mechanically interlocked molecule operates as a perfect molecular switch, most readily described as a "push-button" switch, whereby two discrete and fully occupied translational states are toggled electrochemically at incredibly high rates. This mechanical switching was probed using a wide variety of experimental techniques as well as quantum-mechanical investigations. The fundamental distinctions between this single-station [2]catenane and other more traditional bi- and multistation molecular switches are significant.

Accelerated analyte uptake on single beads in microliter-scale batch separations using acoustic streaming: plutonium uptake by anion exchange for analysis by mass spectrometry.

The use of acoustic streaming as a noncontact mixing platform to accelerate mass-transport-limited diffusion processes in small-volume heterogeneous reactions has been investigated. Single-bead anion exchange of plutonium at nanomolar and subpicomolar concentrations in 20 microL liquid volumes was used to demonstrate the effect of acoustic mixing. Pu uptake rates on individual approximately 760 microm diameter AG 1 x 4 anion-exchange resin beads were determined using acoustic mixing and compared with Pu uptake rates achieved by static diffusion alone. An 82 MHz surface acoustic wave (SAW) device was placed in contact with the underside of a 384-well microplate containing flat-bottomed semiconical wells. Acoustic energy was coupled into the solution in the well, inducing acoustic streaming. Pu uptake rates were determined by the plutonium remaining in solution after specific elapsed time intervals using liquid scintillation counting (LSC) for nanomolar concentrations and thermal ionization mass spectrometry (TIMS) analysis for the subpicomolar concentration experiments. It was found that this small batch uptake reaction could be accelerated by a factor of about 5-fold or more, depending on the acoustic power applied.

Self-assembly/disassembly of giant double-hydrophilic polymersomes at biologically-relevant pH.

Self-assembled giant polymer vesicles prepared from double-hydrophilic diblock copolymers, poly(ethylene oxide)-b-poly(acrylic acid) (PEO-PAA) show significant degradation in response to pH changes. Because of the switching behavior of the diblock copolymers at biologically-relevant pH environments (2 to 9), these polymer vesicles have potential biomedical applications as smart delivery vehicles.

Monitoring and modulating ion traffic in hybrid lipid/polymer vesicles.

Controlling the traffic of molecules and ions across membranes is a critical feature in a number of biologically relevant processes and highly desirable for the development of technologies based on membrane materials. In this paper, ion transport behavior of hybrid lipid/polymer membranes was studied in the absence and presence of ion transfer agents. A pH-sensitive fluorophore was used to investigate ion (H+/OH-) permeability across hybrid lipid/polymer membranes as a function of the fraction of amphiphilic block copolymer. It was observed that vesicles with intermediate lipid/polymer ratios tend to be surprisingly more permeable to ion transport than the pure lipid or pure polymer vesicles. Hybrid vesicle permeability could be further modulated with valinomycin, nigericin, or gramicidin A, which significantly expedite the dissipation of externally-imposed pH gradients by facilitating the transport of the rate-limiting co-ions (e.g. K+) ions across the membrane. For gramicidin A, ion permeability decreased with increasing polymer mole fraction, and the method of introduction of gramicidin A into the membrane played an important role. Strategies to incorporate biofunctional molecules and facilitate their activity in synthetic systems are highly desirable for developing artificial organelles or other synthetic compartmentalized structures requiring control over molecular traffic across biomimetic membranes.

Chemical locomotion.

Research into the autonomous motion of artificial nano- and microscale objects provides basic principles to explore possible applications, such as self-assembly of superstructures, roving sensors, and drug delivery. Although the systems described have unique propulsion mechanisms, motility in each case is made possible by the conversion of locally available chemical energy into mechanical energy. The use of catalysts onboard can afford nondissipative systems that are capable of directed motion. Key to the design of nano- and micromotors is the asymmetric placement of the catalyst: its placement in an environment containing a suitable substrate translates into non-uniform consumption of the substrate and distribution of reaction products, which results in the motility of the object. These same principles are exploited in nature to effect autonomous motion.

The Role of Membrane Fluidization in the Gel-Assisted Formation of Giant Polymersomes.

Polymersomes are being widely explored as synthetic analogs of lipid vesicles based on their enhanced stability and potential uses in a wide variety of applications in (e.g., drug delivery, cell analogs, etc.). Controlled formation of giant polymersomes for use in membrane studies and cell mimetic systems, however, is currently limited by low-yield production methodologies. Here, we describe for the first time, how the size distribution of giant poly(ethylene glycol)-poly(butadiene) (PEO-PBD) polymersomes formed by gel-assisted rehydration may be controlled based on membrane fluidization. We first show that the average diameter and size distribution of PEO-PBD polymersomes may be readily increased by increasing the temperature of the rehydration solution. Further, we describe a correlative relationship between polymersome size and membrane fluidization through the addition of sucrose during rehydration, enabling the formation of PEO-PBD polymersomes with a range of diameters, including giant-sized vesicles (>100 µm). This correlative relationship suggests that sucrose may function as a small molecule fluidizer during rehydration, enhancing polymer diffusivity during formation and increasing polymersome size. Overall the ability to easily regulate the size of PEO-PBD polymersomes based on membrane fluidity, either through temperature or fluidizers, has broadly applicability in areas including targeted therapeutic delivery and synthetic biology.

Dynamic assembly of polymer nanotube networks via kinesin powered microtubule filaments.

We describe for the first time how biological nanomotors may be used to actively self-assemble mesoscale networks composed of diblock copolymer nanotubes. The collective force generated by multiple kinesin nanomotors acting on a microtubule filament is large enough to overcome the energy barrier required to extract nanotubes from polymer vesicles comprised of poly(ethylene oxide-b-butadiene) in spite of the higher force requirements relative to extracting nanotubes from lipid vesicles. Nevertheless, large-scale polymer networks were dynamically assembled by the motors. These networks displayed enhanced robustness, persisting more than 24 h post-assembly (compared to 4-5 h for corresponding lipid networks). The transport of materials in and on the polymer membranes differs substantially from the transport on analogous lipid networks. Specifically, our data suggest that polymer mobility in nanotubular structures is considerably different from planar or 3D structures, and is stunted by 1D confinement of the polymer subunits. Moreover, quantum dots adsorbed onto polymer nanotubes are completely immobile, which is related to this 1D confinement effect and is in stark contrast to the highly fluid transport observed on lipid tubules.

Exploiting lipopolysaccharide-induced deformation of lipid bilayers to modify membrane composition and generate two-dimensional geometric membrane array patterns.

Supported lipid bilayers have proven effective as model membranes for investigating biophysical processes and in development of sensor and array technologies. The ability to modify lipid bilayers after their formation and in situ could greatly advance membrane technologies, but is difficult via current state-of-the-art technologies. Here we demonstrate a novel method that allows the controlled post-formation processing and modification of complex supported lipid bilayer arrangements, under aqueous conditions. We exploit the destabilization effect of lipopolysaccharide, an amphiphilic biomolecule, interacting with lipid bilayers to generate voids that can be backfilled to introduce desired membrane components. We further demonstrate that when used in combination with a single, traditional soft lithography process, it is possible to generate hierarchically-organized membrane domains and microscale 2-D array patterns of domains. Significantly, this technique can be used to repeatedly modify membranes allowing iterative control over membrane composition. This approach expands our toolkit for functional membrane design, with potential applications for enhanced materials templating, biosensing and investigating lipid-membrane processes.

Patterned assembly of quantum dots onto surfaces modified with click microcontact printing.

The self-assembly of CdSe quantum dots (QDs) onto a patterned silica surface generated from surface microcontact click printing is presented. The mechanically robust self-assembly process produces patterns of QDs which remain steadfast, even as subsequent reactions are performed on the substrate, demonstrating the utility and ease of this self-assembly process.