RESUMO
As the primary structural protein of our bodies, fibrillar collagen and its organizational patterns determine the biomechanics and shape of tissues. While the molecular assembly of individual fibrils is well understood, the mechanisms determining the arrangement of fibers and thus the shape and form of tissues remain largely unknown. We have developed a cell culture model that successfully recapitulates early tissue development and the de novo deposition of collagen fibers to investigate the role of mechanical cues on collagen fiber alignment. The devices used a thin, collagen-coated deformable PDMS membrane inside a tissue culture well built on microscope-grade coverslips. Deformations and strains in the PDMS membrane were quantified by tracking fluorescent bead displacement and through the use of a COMSOL model. Cyclical strains were applied to serum-cultured rabbit corneal cells at 0.5 Hz for 24-48 h and showed a preferred alignment after 36 h of cyclical loading. Cells cultured with ascorbic acid under methylcellulose serum-free conditions deposited a collagenous matrix that was visible under live second harmonic generation microscopy at week 4. Our microfabricated tissue culture system allows for the controllable application of a wide range of stress profiles to cells, and for the observation and quantification of cells and de novo collagen formation in vitro. Future studies will involve the fabrication of models to study the formation and organization of collagen in ocular diseases.
Assuntos
Técnicas de Cultura de Células , Colágeno , Córnea , Matriz Extracelular , Técnicas Analíticas Microfluídicas , Animais , Técnicas de Cultura de Células/instrumentação , Técnicas de Cultura de Células/métodos , Colágeno/química , Colágeno/metabolismo , Córnea/química , Córnea/citologia , Córnea/metabolismo , Dimetilpolisiloxanos/química , Matriz Extracelular/química , Matriz Extracelular/metabolismo , Técnicas Analíticas Microfluídicas/instrumentação , Técnicas Analíticas Microfluídicas/métodos , Modelos Teóricos , Nylons/química , CoelhosRESUMO
We present a microfluidic platform for simultaneous on-chip pumping and size-based separation of cells and particles without external fluidic control systems required for most existing platforms. The device utilizes an array of acoustically actuated air/liquid interfaces generated using dead-end side channels termed Lateral Cavity Acoustic Transducers (LCATs). The oscillating interfaces generate local streaming flow while the angle of the LCATs relative to the main channel generates a global bulk flow from the inlet to the outlet. The interaction of these two competing velocity fields (i.e. global bulk velocity vs. local streaming velocity) is responsible for the observed separation. It is shown that the separation of 5 µm and 10 µm polystyrene beads is dependent on the ratio of these two competing velocity fields. The experimental and simulation results suggest that particle trajectories based only on Stokes drag force cannot fully explain the separation behavior and that the impact of additional forces due to the oscillating flow field must be considered to determine the trajectory of the beads and ultimately the separation behavior of the device. To demonstrate an application of this separation platform with cellular components, smaller red blood cells (7.5 ± 0.8 µm) are separated from larger K562 cells (16.3 ± 2.0 µm) with viabilities comparable to those of controls based on a trypan blue exclusion assay.
Assuntos
Separação Celular/instrumentação , Técnicas Analíticas Microfluídicas/instrumentação , Linhagem Celular Tumoral , Sobrevivência Celular , Simulação por Computador , Desenho de Equipamento , Humanos , Tamanho da PartículaRESUMO
Dielectrophoresis (DEP) has proven an invaluable tool for the enrichment of populations of stem and progenitor cells owing to its ability to sort cells in a label-free manner and its biological safety. However, DEP separation devices have suffered from a low throughput preventing researchers from undertaking studies requiring large numbers of cells, such as needed for cell transplantation. We developed a microfluidic device designed for the enrichment of stem and progenitor cell populations that sorts cells at a rate of 150,000 cells/h, corresponding to an improvement in the throughput achieved with our previous device designs by over an order of magnitude. This advancement, coupled with data showing the DEP-sorted cells retain their enrichment and differentiation capacity when expanded in culture for periods of up to 2 weeks, provides sufficient throughput and cell numbers to enable a wider variety of experiments with enriched stem and progenitor cell populations. Furthermore, the sorting devices presented here provide ease of setup and operation, a simple fabrication process, and a low associated cost to use that makes them more amenable for use in common biological research laboratories. To our knowledge, this work represents the first to enrich stem cells and expand them in culture to generate transplantation-scale numbers of differentiation-competent cells using DEP.
RESUMO
A novel microfluidic device enabling selective generation of droplets and encapsulation of targets is presented. Unlike conventional methods, the presented mechanism generates droplets with unique selectivity by utilizing a K-junction design. The K-junction is a modified version of the classic T-junction with an added leg that serves as the exit channel for waste. The dispersed phase fluid enters from one diagonal of the K and exits the other diagonal while the continuous phase travels in the straight leg of the K. The intersection forms an interface that allows the dispersed phase to be controllably injected through actuation of an elastomer membrane located above the inlet channel near the interface. We have characterized two critical components in controlling the droplet size-membrane actuation pressure and timing as well as identified the region of fluid in which the droplet will be formed. This scheme will have applications in fluid sampling processes and selective encapsulation of materials. Selective encapsulation of a single cell from the dispersed phase fluid is demonstrated as an example of functionality of this design.
RESUMO
Here, we present a microfluidic droplet trap that takes advantage of the net Laplace pressure force generated when a droplet is differentially constricted. Mathematical simulations were first used to understand the working range of the component; followed by finite element modeling using the CFD software package to further characterize the behavior of the system. Controlled release of the trapped droplets is also demonstrated through both a mechanical method and a chemical method that manipulates the total pressure exerted on the trapped droplet. The unique design of this trapping device also provides the capability for selection of a single droplet from a train, as well as droplet fusion.
RESUMO
Sensors have been widely used for disease diagnosis, environmental quality monitoring, food quality control, industrial process analysis and control, and other related fields. As a key tool for sensor data analysis, machine learning is becoming a core part of novel sensor design. Dividing a complete machine learning process into three steps: data pre-treatment, feature extraction and dimension reduction, and system modeling, this paper provides a review of the methods that are widely used for each step. For each method, the principles and the key issues that affect modeling results are discussed. After reviewing the potential problems in machine learning processes, this paper gives a summary of current algorithms in this field and provides some feasible directions for future studies.