RESUMO
Partial cystectomy procedures for urinary bladder-related dysfunction involve long recovery periods, during which urodynamic studies (UDS) intermittently assess lower urinary tract function. However, UDS are not patient-friendly, they exhibit user-to-user variability, and they amount to snapshots in time, limiting the ability to collect continuous, longitudinal data. These procedures also pose the risk of catheter-associated urinary tract infections, which can progress to ascending pyelonephritis due to prolonged lower tract manipulation in high-risk patients. Here, we introduce a fully bladder-implantable platform that allows for continuous, real-time measurements of changes in mechanical strain associated with bladder filling and emptying via wireless telemetry, including a wireless bioresorbable strain gauge validated in a benchtop partial cystectomy model. We demonstrate that this system can reproducibly measure real-time changes in a rodent model up to 30 d postimplantation with minimal foreign body response. Studies in a nonhuman primate partial cystectomy model demonstrate concordance of pressure measurements up to 8 wk compared with traditional UDS. These results suggest that our system can be used as a suitable alternative to UDS for long-term postoperative bladder recovery monitoring.
Assuntos
Bexiga Urinária , Infecções Urinárias , Animais , Humanos , Bexiga Urinária/cirurgia , Urodinâmica/fisiologia , Próteses e Implantes , CistectomiaRESUMO
Adipose tissue macrophages (ATM) are key players in the development of obesity and associated metabolic inflammation which contributes to systemic metabolic dysfunction. We here found that fibroblast activation protein α (FAP), a well-known marker of cancer-associated fibroblast, is selectively expressed in murine and human ATM among adipose tissue-infiltrating leukocytes. Macrophage FAP deficiency protects mice against diet-induced obesity and proinflammatory macrophage infiltration in obese adipose tissues, thereby alleviating hepatic steatosis and insulin resistance. Mechanistically, FAP specifically mediates monocyte chemokine protein CCL8 expression by ATM, which is further upregulated upon high-fat-diet (HFD) feeding, contributing to the recruitment of monocyte-derived proinflammatory macrophages with no effect on their classical inflammatory activation. CCL8 overexpression restores HFD-induced metabolic phenotypes in the absence of FAP. Moreover, macrophage FAP deficiency enhances energy expenditure and oxygen consumption preceding differential body weight after HFD feeding. Such enhanced energy expenditure is associated with increased levels of norepinephrine (NE) and lipolysis in white adipose tissues, likely due to decreased expression of monoamine oxidase, a NE degradation enzyme, by Fap-/- ATM. Collectively, our study identifies FAP as a previously unrecognized regulator of ATM function contributing to diet-induced obesity and metabolic inflammation and suggests FAP as a potential immunotherapeutic target against metabolic disorders.
Assuntos
Tecido Adiposo , Resistência à Insulina , Animais , Humanos , Camundongos , Tecido Adiposo/metabolismo , Dieta Hiperlipídica , Inflamação/metabolismo , Macrófagos/metabolismo , Camundongos Endogâmicos C57BL , Obesidade/metabolismoRESUMO
Degradable polymer matrices and porous scaffolds provide powerful mechanisms for passive, sustained release of drugs relevant to the treatment of a broad range of diseases and conditions. Growing interest is in active control of pharmacokinetics tailored to the needs of the patient via programmable engineering platforms that include power sources, delivery mechanisms, communication hardware, and associated electronics, most typically in forms that require surgical extraction after a period of use. Here we report a light-controlled, self-powered technology that bypasses key disadvantages of these systems, in an overall design that is bioresorbable. Programmability relies on the use of an external light source to illuminate an implanted, wavelength-sensitive phototransistor to trigger a short circuit in an electrochemical cell structure that includes a metal gate valve as its anode. Consequent electrochemical corrosion eliminates the gate, thereby opening an underlying reservoir to release a dose of drugs by passive diffusion into surrounding tissue. A wavelength-division multiplexing strategy allows release to be programmed from any one or any arbitrary combination of a collection of reservoirs built into an integrated device. Studies of various bioresorbable electrode materials define the key considerations and guide optimized choices in designs. In vivo demonstrations of programmed release of lidocaine adjacent the sciatic nerves in rat models illustrate the functionality in the context of pain management, an essential aspect of patient care that could benefit from the results presented here.
Assuntos
Implantes Absorvíveis , Sistemas de Liberação de Medicamentos , Ratos , Animais , Eletrônica , PolímerosRESUMO
Earlier work has shown that siRNA-mediated reduction of the SUPT4H or SUPT5H proteins, which interact to form the DSIF complex and facilitate transcript elongation by RNA polymerase II (RNAPII), can decrease expression of mutant gene alleles containing nucleotide repeat expansions differentially. Using luminescence and fluorescence assays, we identified chemical compounds that interfere with the SUPT4H-SUPT5H interaction and then investigated their effects on synthesis of mRNA and protein encoded by mutant alleles containing repeat expansions in the huntingtin gene (HTT), which causes the inherited neurodegenerative disorder, Huntington's Disease (HD). Here we report that such chemical interference can differentially affect expression of HTT mutant alleles, and that a prototypical chemical, 6-azauridine (6-AZA), that targets the SUPT4H-SUPT5H interaction can modify the biological response to mutant HTT gene expression. Selective and dose-dependent effects of 6-AZA on expression of HTT alleles containing nucleotide repeat expansions were seen in multiple types of cells cultured in vitro, and in a Drosophila melanogaster animal model for HD. Lowering of mutant HD protein and mitigation of the Drosophila "rough eye" phenotype associated with degeneration of photoreceptor neurons in vivo were observed. Our findings indicate that chemical interference with DSIF complex formation can decrease biochemical and phenotypic effects of nucleotide repeat expansions.
Assuntos
Azauridina , Proteína Huntingtina , Doença de Huntington , Proteínas Mutantes , Mutação , Proteínas Nucleares , Fenótipo , Proteínas Repressoras , Fatores de Elongação da Transcrição , Alelos , Animais , Azauridina/farmacologia , Células Cultivadas , Expansão das Repetições de DNA , Modelos Animais de Doenças , Drosophila melanogaster/genética , Drosophila melanogaster/metabolismo , Humanos , Proteína Huntingtina/biossíntese , Proteína Huntingtina/genética , Proteína Huntingtina/metabolismo , Doença de Huntington/genética , Medições Luminescentes , Proteínas Mutantes/biossíntese , Proteínas Mutantes/genética , Proteínas Mutantes/metabolismo , Proteínas Nucleares/metabolismo , Células Fotorreceptoras de Invertebrados/efeitos dos fármacos , Proteínas Repressoras/metabolismo , Fatores de Elongação da Transcrição/metabolismoRESUMO
Recently, environmental temperature has been shown to regulate bone homeostasis. However, the mechanisms by which cold exposure affects bone mass remain unclear. In our present study, we observed that exposure to cold temperature (CT) decreased bone mass and quality in mice. Furthermore, a transplant of exosomes derived from the plasma of mice exposed to cold temperature (CT-EXO) can also impair the osteogenic differentiation of BMSCs and decrease bone mass by inhibiting autophagic activity. Rapamycin, a potent inducer of autophagy, can reverse cold exposure or CT-EXO-induced bone loss. Microarray sequencing revealed that cold exposure increases the miR-25-3p level in CT-EXO. Mechanistic studies showed that miR-25-3p can inhibit the osteogenic differentiation and autophagic activity of BMSCs. It is shown that inhibition of exosomes release or downregulation of miR-25-3p level can suppress CT-induced bone loss. This study identifies that CT-EXO mediates CT-induced osteoporotic effects through miR-25-3p by inhibiting autophagy via targeting SATB2, presenting a novel mechanism underlying the effect of cold temperature on bone mass.
Assuntos
Autofagia , Temperatura Baixa , Exossomos , Camundongos Endogâmicos C57BL , MicroRNAs , Osteogênese , Animais , Autofagia/efeitos dos fármacos , Camundongos , Exossomos/metabolismo , MicroRNAs/metabolismo , MicroRNAs/genética , Osteogênese/efeitos dos fármacos , Células-Tronco Mesenquimais/metabolismo , Osteoporose/patologia , Diferenciação Celular/efeitos dos fármacos , Osso e Ossos/metabolismo , Feminino , Densidade Óssea , Sirolimo/farmacologiaRESUMO
AIM AND OBJECTIVES: To investigate the prevalence of dysphagia in patients with COPD, identify the risk factors for dysphagia, develop a visual clinical prediction model and quantitatively predict the probability of developing dysphagia. BACKGROUND: Patients with COPD are at high risk of dysphagia, which is strongly linked to the acute exacerbation of their condition. The use of effective tools to predict its risk may contribute to the early identification and treatment of dysphagia in patients with COPD. DESIGN: A cross-sectional design. METHODS: From July 2021 to April 2023, we enrolled 405 patients with COPD for this study. The clinical prediction model was constructed according to the results of a univariate analysis and a logistic regression analysis, evaluated by discrimination, calibration and decision curve analysis and visualized by a nomogram. This study was reported using the TRIPOD checklist. RESULTS: In total, 405 patients with COPD experienced dysphagia with a prevalence of 59.01%. A visual prediction model was constructed based on age, whether combined with cerebrovascular disease, chronic pulmonary heart disease, acute exacerbation of COPD, home noninvasive positive pressure ventilation, dyspnoea level and xerostomia level. The model exhibited excellent discrimination at an AUC of .879. Calibration curve analysis indicated a good agreement between experimental and predicted values, and the decision curve analysis showed a high clinical utility. CONCLUSION: The model we devised may be used in clinical settings to predict the occurrence of dysphagia in patients with COPD at an early stage. RELEVANCE TO CLINICAL PRACTICE: The model can help nursing staff to calculate the risk probability of dysphagia in patients with COPD, formulate personalized preventive care measures for high-risk groups as soon as possible to achieve early prevention or delay of dysphagia and its related complications and improve the prognosis. PATIENT OR PUBLIC CONTRIBUTION: No patient or public contribution.
RESUMO
Eco/bioresorbable electronics represent an emerging class of technology defined by an ability to dissolve or otherwise harmlessly disappear in environmental or biological surroundings after a period of stable operation. The resulting devices provide unique capabilities as temporary biomedical implants, environmental sensors, and related systems. Recent publications report schemes to overcome challenges in fabrication that follow from the low thermostability and/or high chemical reactivity of the eco/bioresorbable constituent materials. Here, this work reports the use of high-speed sewing machines, as the basis for a high-throughput manufacturing technique that addresses many requirements for these applications, without the need for high temperatures or reactive solvents. Results demonstrate that a range of eco/bioresorbable metal wires and polymer threads can be embroidered into complex, user-defined conductive patterns on eco/bioresorbable substrates. Functional electronic components, such as stretchable interconnects and antennas are possible, along with fully integrated systems. Examples of the latter include wirelessly powered light-emitting diodes, radiofrequency identification tags, and temporary cardiac pacemakers. These advances add to a growing range of options in high-throughput, automated fabrication of eco/bioresorbable electronics.
Assuntos
Implantes Absorvíveis , Eletrônica , Metais , Polímeros , SolventesRESUMO
Medial arterial calcification (MAC), a systemic vascular disease different from atherosclerosis, is associated with an increased incidence of cardiovascular events. Several studies have demonstrated that ambient temperature is one of the most important factors affecting cardiovascular events. However, there has been limited research on the effect of different ambient temperatures on MAC. In the present study, we showed that cold temperature exposure (CT) in mice slowed down the formation of vitamin D (VD)-induced vascular calcification compared with room temperature exposure (RT). To investigate the mechanism involved, we isolated plasma-derived exosomes from mice subjected to CT or RT for 30 days (CT-Exo or RT-Exo, respectively). Compared with RT-Exo, CT-Exo remarkably alleviated the calcification/senescence formation of vascular smooth muscle cells (VSMCs) and promoted autophagy by activating the phosphorylation of AMP-activated protein kinase (p-AMPK) and inhibiting phosphorylation of mammalian target of rapamycin (p-mTOR). At the same time, CT-Exo promoted autophagy in ß-glycerophosphate (ß-GP)-induced VSMCs. The number of autophagosomes and the expression of autophagy-related proteins ATG5 and LC3B increased, while the expression of p62 decreased. Based on a microRNA chip microarray assay and real-time polymerase chain reaction, miR-320a-3p was highly enriched in CT-Exo as well as thoracic aortic vessels in CT mice. miR-320a-3p downregulation in CT-Exo using AntagomiR-320a-3p inhibited autophagy and blunted its anti-calcification protective effect on VSMCs. Moreover, we identified that programmed cell death 4 (PDCD4) is a target of miR-320a-3p, and silencing PDCD4 increased autophagy and decreased calcification in VSMCs. Treatment with CT-Exo alleviated the formation of MAC in VD-treated mice, while these effects were partially reversed by GW4869. Furthermore, the anti-arterial calcification protective effects of CT-Exo were largely abolished by AntagomiR-320a-3p in VD-induced mice. In summary, we have highlighted that prolonged cold may be a good way to reduce the incidence of MAC. Specifically, miR-320a-3p from CT-Exo could protect against the initiation and progression of MAC via the AMPK/mTOR autophagy pathway.
Assuntos
Aterosclerose , MicroRNAs , Camundongos , Animais , Proteínas Quinases Ativadas por AMP/metabolismo , Antagomirs , Serina-Treonina Quinases TOR , Autofagia , MicroRNAs/metabolismo , Mamíferos/genética , Mamíferos/metabolismoRESUMO
Vascular calcification often occurs in patients with chronic renal failure (CRF), which significantly increases the incidence of cardiovascular events in CRF patients. Our previous studies identified the crosstalk between the endothelial cells (ECs) and vascular smooth muscle cells (VSMCs), and the paracrine effect of VSMCs, which regulate the calcification of VSMCs. Herein, we aim to investigate the effects of exosomes secreted by high phosphorus (HPi) -induced adventitial fibroblasts (AFs) on the calcification of VSMCs and the underlying mechanism, which will further elucidate the important role of AFs in high phosphorus vascular wall microenvironment. The conditioned medium of HPi-induced AFs promotes the calcification of VSMCs, which is partially abrogated by GW4869, a blocker of exosomes biogenesis or release. Exosomes secreted by high phosphorus-induced AFs (AFsHPi-Exos) show similar effects on VSMCs. miR-21-5p is enriched in AFsHPi-Exos, and miR-21-5p enhances osteoblast-like differentiation of VSMCs by downregulating cysteine-rich motor neuron 1 (Crim1) expression. AFsHPi-Exos and exosomes secreted by AFs with overexpression of miR-21-5p (AFsmiR21M-Exos) significantly accelerate vascular calcification in CRF mice. In general, AFsHPi-Exos promote the calcification of VSMCs and vascular calcification by delivering miR-21-5p to VSMCs and subsequently inhibiting the expression of Crim1. Combined with our previous studies, the present experiment supports the theory of vascular wall microenvironment.
Assuntos
Exossomos , MicroRNAs , Calcificação Vascular , Animais , Camundongos , Células Endoteliais , Fibroblastos , Fósforo , MicroRNAs/genética , Receptores de Proteínas Morfogenéticas ÓsseasRESUMO
BACKGROUND: The incidence of stroke in China is increasing, along with a clear trend in the prevalence of risk factors. Alcohol consumption is also a risk factor for stroke. Many cohort studies have explored the relationship between alcohol consumption and stroke risk. However, findings have been inconsistent. METHODS: We used cluster sampling to select 13 districts and counties (at the same level) in Chongqing, China. Then, we used stratified random sampling to distribute the number of people in each district and county. 23,308 adults aged 30-79 were recruited between October 2018 and February 2019. Follow-up was conducted through a monitoring system and questionnaires until September 2022. Information on alcohol consumption and other covariates was collected using a standardized questionnaire. Participants were asked to report their weekly frequency of drinking over the past year and weekly intake of various alcoholic beverages in general. The frequency of drinking was divided into three categories: 1-2 d/week, 3-5 d/week, and 6-7 d/week. The average daily alcohol consumption is calculated based on the amount of alcohol contained in different alcoholic beverages. It is classified as nondrinker (0 g/day), light (0 to 12 g/day), moderate (13 to 36 g/day), and high (> 36 g/day). Cox proportional hazard regression models were used to estimate the association between alcohol consumption and stroke risk. Results are shown as multivariate-adjusted hazard ratios (HRs) and 95% confidence intervals (95% CIs). RESULTS: With an average follow-up of 3.80 years, there were 310 new stroke events. The incidence of total stroke was 368.69 per 100,000 person-years. Overall, after adjusting for covariates, moderate alcohol consumption (average daily alcohol consumption 13-36 g/d) was associated with a lower risk of total stroke (HR: 0.48; 95% CI: 0.25-0.92) compared with nondrinkers. The adjusted HR and 95% CI for total stroke and ischemic stroke for those who drank alcohol 6-7 days per week were 0.60(0.37, 0.96) and 0.53(0.30, 0.94), respectively. The risk of total stroke (HR: 0.39; 95% CI: 0.17-0.89) was reduced in a pattern of drinking 6-7 days per week but with a mean alcohol consumption of less than 36 g/d. There was no significant association between alcohol consumption and hemorrhagic stroke. CONCLUSION: This study suggests moderate alcohol consumption is associated with a lower risk of total stroke. And healthy drinking patterns should be of more significant concern.
Assuntos
Acidente Vascular Cerebral , Adulto , Humanos , Estudos Prospectivos , Acidente Vascular Cerebral/epidemiologia , Acidente Vascular Cerebral/etiologia , China/epidemiologia , Etanol , Consumo de Bebidas Alcoólicas/efeitos adversos , Consumo de Bebidas Alcoólicas/epidemiologiaRESUMO
Electronics worn on the body have the potential to improve human health and the quality of life by monitoring vital signs and movements, displaying information, providing self-illumination for safety, and even providing new routes for personal expression through fashion. Textiles are a part of daily life in clothing, making them an ideal platform for wearable electronics. The acceptance of wearable e-textiles hinges on maintaining the properties of textiles that make them compatible with the human body. Beneficial properties such as softness, stretchability, drapability, and breathability come from the 3D fibrous structures of knitted and woven textiles. However, these structures also present considerable challenges for the fabrication of wearable e-textiles. Fabrication methods used for modern electronic devices are designed for 2D planar substrates and are mostly unsuitable for the complex 3D structures of textiles. There is thus an urgent need to develop fabrication methods specifically for e-textiles to advance wearable electronics. Solution-based fabrication methods are a promising approach to fabricating wearable e-textiles, especially considering that textiles have been successfully modified using pigmented dyes in dyebaths and printing inks for thousands of years. In this Account, we discuss our research on the solution-based electroless metallization of textiles to fabricate conductive e-textiles that are building blocks for e-textile devices. Electroless metallization solutions fully permeate textile structures to deposit metallic coatings on the surfaces of individual textile fibers, maintaining the inherent textile structures and wearability. The resulting e-textiles are highly conductive, soft, and stretchable. We furthermore discuss ways to turn the challenges related to textile structures into new opportunities by strategically using the structural features of textiles for e-textile device design. We demonstrate this textile-centric approach to designing e-textile devices using two examples. We discuss how the structure of an ultrasheer knitted textile forms a useful framework for new e-textile transparent conductive electrodes and describe the implementation of these electrodes to form highly stretchable light-emitting e-textiles. We also show how the structural features of velour fabrics form the basis for an innovative "island-bridge" strain-engineering structure that enables the integration of brittle electroactive materials and protects them from strain-induced damage, leading to the fabrication of stretchable textile-based lithium-ion battery electrodes. With the vast variety of textile structures available, we highlight the opportunities associated with this textile-centric design approach to advance textile-based wearable electronics. Such advances depend on a deep understanding of the relationship between the textile structure and the device requirements, which may potentially lead to the development of new textile structures customized to support specific devices. We conclude with a discussion of the challenges that remain for the future of e-textiles, including durability, sustainability, and the development of performance standards.
Assuntos
Têxteis , Dispositivos Eletrônicos Vestíveis , Condutividade Elétrica , Eletrodos , Desenho de Equipamento , Ouro/química , HumanosRESUMO
This study aimed to explore the effects of recombinant serine protease treatment on the development of post-harvest loquat diseases, fruit quality, and disease resistance enzyme activities. It also sought to analyze differential genes expression using RNA-seq technology. Transcriptomics analysis revealed 708 and 398 differentially expressed genes (DEGs) in loquat fruits treated with serine protease for 24 and 48 h. Furthermore, 2198 DEGs were obtained between 24 and 48 h after treatment. The genes encoding JAZ, MYC2 and ERF in the plant signal transduction pathway were significantly up-regulated. The resistance-related genes, such as PPO, PAL, TLP, WRKY, and transcription factors were also significantly up-regulated. These results indicated that the recombinant serine protease can induce plant signal transduction pathway in loquat fruit. The expression of some resistance-related genes enhanced the disease resistance of loquat fruit and revealed the molecular mechanism of loquat fruit resistance induced by recombinant serine protease.
Assuntos
Eriobotrya , Eriobotrya/genética , Eriobotrya/metabolismo , Frutas/genética , Perfilação da Expressão Gênica/métodos , Regulação da Expressão Gênica de Plantas , Serina Proteases/genética , Serina Proteases/metabolismo , TranscriptomaRESUMO
ABSTRACT: To realize the full gamut of functions that are envisaged for electronic textiles (e-textiles) a range of semiconducting, conducting and electrochemically active materials are needed. This article will discuss how metals, conducting polymers, carbon nanotubes, and two-dimensional (2D) materials, including graphene and MXenes, can be used in concert to create e-textile materials, from fibers and yarns to patterned fabrics. Many of the most promising architectures utilize several classes of materials (e.g., elastic fibers composed of a conducting material and a stretchable polymer, or textile devices constructed with conducting polymers or 2D materials and metal electrodes). While an increasing number of materials and devices display a promising degree of wash and wear resistance, sustainability aspects of e-textiles will require greater attention.
RESUMO
BACKGROUND: The aim of the current study was to (a) measure the socioeconomic inequalities in oral health and examine whether the inequalities are greater in disease experience or in its treatment and to (b) decompose the factors that influence oral health inequalities among the adults of Guangdong Province. METHODS: A cross-sectional study was conducted among 35- to 44-year-old and 65- to 74-year-old adults in Guangdong Province. All participants underwent oral health examinations and answered questionnaires about their oral health. We measured the concentration indices of the DMFT and its separate components, namely, decayed teeth (DT), missing teeth (MT), and filled teeth (FT), to explore the inequalities in oral health status; then, we analysed its decomposition to interpret the factors that influence the inequalities. RESULTS: The results showed that significant inequality was concentrated on FT (CI = 0.24, 95% CI = 0.14/0.33, SE = 0.05). The concentration indices for the DMFT (CI = 0.02, 95% CI = 0.02/0.06, SE = 0.02) and MT (CI = 0.02, 95% CI 0.03/0.08, SE = 0.03) were small and close to zero, while the concentration for DT (CI = - 0.04, 95% CI = - 0.01/0.02, SE = 0.03) was not statistically significant. The results from the decomposition analysis suggested that a substantial proportion of the inequality was explained by household income, high education level, regular oral examination and type of insurance (5.1%, 12.4%, 43.2%, - 39.6% (Urban Employee Basic Medical Insurance System) and 34.5% (New-Type Rural Medical Collaboration System), respectively). CONCLUSIONS: The results indicated greater inequalities in dental caries than in caries experience. Among the included factors, household income, high education level, and regular oral health examinations had the greatest impact on the inequalities in the number of FT. In addition, the current medical insurance systems, including the Urban Employee Basic Medical Insurance System, Urban Resident Basic Medical Insurance System, and the New-Type Rural Medical Collaboration System, have not been effectively used in oral treatment. Policy-making and the implementation of interventions for tackling socioeconomic oral health inequalities should focus on reducing the burden of treatment and providing greater access to dental care for low-income groups. Welfare policies are skewed towards rural areas and low-income people.
Assuntos
Cárie Dentária , Adulto , Idoso , Estudos Transversais , Índice CPO , Cárie Dentária/epidemiologia , Cárie Dentária/terapia , Suscetibilidade à Cárie Dentária , Humanos , Saúde BucalRESUMO
Photocatalytic nitrogen fixation represents a green alternative to the conventional Haber-Bosch process in the conversion of nitrogen to ammonia. In this study, a series of Bi5O7Br nanostructures were synthesized via a facile, low-temperature thermal treatment procedure, and their photocatalytic activity toward nitrogen fixation was evaluated and compared. Spectroscopic measurements showed that the tubular Bi5O7Br sample prepared at 40 °C (Bi5O7Br-40) exhibited the highest electron-transfer rate among the series, producing a large number of O2.- radicals and oxygen vacancies under visible-light photoirradiation and reaching a rate of photocatalytic nitrogen fixation of 12.72 mM·g-1·h-1 after 30 min of photoirradiation. The reaction dynamics was also monitored by in situ infrared measurements with a synchrotron radiation light source, where the transient difference between signals in the dark and under photoirradiation was analyzed and the reaction pathway of nitrogen fixation was identified. This was further supported by results from density functional theory calculations. The reaction energy of nitrogen fixation was quantitatively estimated and compared by building oxygen-enriched and anoxic models, where the change in the oxygen vacancy concentration was found to play a critical role in determining the nitrogen fixation performance. Results from this study suggest that Bi5O7Br with rich oxygen vacancies can be used as a high-performance photocatalyst for nitrogen fixation.
RESUMO
BACKGROUND: Gingivitis is a common oral health problem, and untreated gingivitis can progress to periodontitis. The objectives of this study were to (1) explore associated factors of gingival bleeding and calculus among 12-year-old adolescents; (2) find predictive models for gingivitis management. METHODS: Four thousand five hundred twenty-five subjects aged 12 in Sichuan Province were investigated. The questionnaire and clinical examination were applied in schools, and two-level logistic regression models were constructed to interpret the effect of individual and contextual factors on Chinese adolescents' gingival bleeding and calculus. RESULTS: 46.63% (95%CI: 40.71, 51.60) and 66.94% (95%CI: 56.85, 67.45) of the subjects presented gingival bleeding and calculus, respectively. For the gingival bleeding cases, the model showed the significant associated indicators were hukou (OR = 0.61, 95% CI: 0.52-0.72), family size (OR = 1.41, 95% CI: 1.19-1.68), parental educational level (father: OR = 0.53, 95% CI: 0.45-0.63; mother: OR = 0.71, 95% CI: 0.59-0.86), tooth-brushing frequency (OR = 0.35, 95% CI: 0.26-0.48), dental floss use (OR = 0.58, 95% CI: 0.41-0.83), sugar-containing drink consumption (OR = 2.11, 95% CI: 1.80-2.49), and dental visit (OR = 1.44, 95% CI: 1.19-1.74). It also confirmed that gender (OR = 1.32, 95% CI: 1.13-1.54), hukou (OR = 0.69, 95% CI: 0.59-0.82), family size (OR = 1.34, 95% CI: 1.12-1.59), parental educational level (father: OR = 0.46, 95% CI: 0.39-0.54; mother: OR = 0.65, 95% CI: 0.59-0.82), tooth-brushing frequency (OR = 0.57, 95% CI: 0.42-0.78), dental floss use (OR = 0.66, 95% CI: 0.48-0.90) and sugar-containing drink consumption (OR = 1.30, 95% CI: 1.11-1.53) were associated factors for dental calculus. CONCLUSIONS: Gingival bleeding and calculus were common in western Chinese adolescents. Socio-demographic factors including gender, hukou and family factors are strong determinants of gingival health in Chinese adolescents. In addition, health-related lifestyle behaviors such as healthy diet, good hygiene care and more dental visits are good predictors of better gingival status.
Assuntos
Cálculos Dentários/etnologia , Hemorragia Gengival/etnologia , Gengivite , Povo Asiático , Criança , Cálculos Dentários/epidemiologia , Feminino , Hemorragia Gengival/epidemiologia , Hemorragia Gengival/etiologia , Humanos , Masculino , Análise Multinível , Saúde BucalRESUMO
BACKGROUND: We aim to explore the association between self-reported snoring and hypertension among adults aged 30-79 in Chongqing, China. METHODS: A total of 23,342 individuals aged 30-79 were included at baseline from August 2018 to January 2019, and the final sample size for the analysis was 22,423. Face-to-face interviews and physical examinations were conducted by trained investigators. Logistic regression was performed to study age-specific and gender-specific associations between snoring and hypertension. RESULTS: Frequent snoring was associated with the risk of hypertension for each age and gender group, and the frequency of snoring was positively correlated with the risk for hypertension. For the three age groups (< 45, 45-59, ≥ 60), compared with the non-snoring group, those who snore often had a 64.5%, 53.3%, and 24.5% increased risk of hypertension (< 45: OR = 1.65, 95%CI 1.34-2.02; 45-59: OR = 1.53, 95%CI 1.37-1.72; ≥ 60: OR = 1.25, 95%CI 1.09-1.42), respectively. For men and women, those who snore often had a 46.8% and 97.2% increased risk of hypertension, respectively, than the non-snoring group (men: OR = 1.47, 95%CI 1.33-1.63; women: OR = 1.97, 95%CI 1.75-2.23). CONCLUSIONS: People who snore frequently should pay close attention to their blood pressure levels in order to achieve early prevention of hypertension, particularly for snorers who are female and aged under 45; importance should be attached to their blood pressure control.
Assuntos
Hipertensão/epidemiologia , Ronco/complicações , Adulto , Idoso , China/epidemiologia , Estudos Transversais , Feminino , Humanos , Hipertensão/etiologia , Masculino , Pessoa de Meia-Idade , AutorrelatoRESUMO
High back-pressure (HBP) heating technology has been identified as an effective approach to improve the efficiency of combined heat and power (CHP). In this study, the novel concept of a HBP heating system with energy cascade utilization is developed and its probability examined. In the reformative design, the extracted heating steam from the intermediate-pressure turbine (IPT) is first drawn to an additional turbine where its excess pressure can be converted into electricity, then steam with a lower pressure can be employed to heat the supply water. As a consequence, the exergy destruction in the supply water heating process can be reduced and the efficiency of the cogeneration unit raised. A detailed thermodynamic investigation was performed based on a typical coal-fired HBP-CHP unit incorporating the proposed configuration. The results show that the artificial thermal efficiency (ATE) promotion was as much as 2.01 percentage points, with an additional net power output of 8.4 MW compared to the reference unit. This was attributed to a 14.65 percentage-point increment in the exergy efficiency of the supply water heating process caused by the suggested retrofitting. The influences of the unit power output, unit heat output, supply water and return water temperatures and turbine back pressure on the thermal performance of the modified system are discussed as well. In addition, the economic performance of the new design is assessed, indicating that the proposed concept is financially feasible.
RESUMO
Based on the Kraljic model,this paper established the scoring standard system for medical equipment procurement,and determined the weight coefficients of each evaluation factor by the analytic hierarchy process (AHP),then the procurement classification model of medical equipment was successfully established.It is proved that this model can classify medical equipment effectively,which enables the purchasing personnel to adopt corresponding purchasing strategies according to different classification.This model can be extended to all medical equipment procurement,realizing the delicacy and individualized procurement management of the equipment,which has strong operability and guiding significance.