One Stone, Two Birds: High-Brightness Aggregation-Induced Emission Photosensitizers for Super-Resolution Imaging and Photodynamic Therapy.

Most aggregation-induced emission (AIE) luminogens exhibit high brightness, excellent photostability, and good biocompatibility, but these AIE-active agents, which kill two birds with one stone to result in applications in both stimulated emission depletion (STED) super-resolution imaging and photodynamic therapy (PDT), have not been reported yet but are urgently needed. To meet the requirements of STED nanoscopy and PDT, D-A-π-A-D type DTPABT-HP is designed by tuning conjugated π spacers. It exhibits red-shifted emission, high PLQY of 32.04%, and impressive 1O2 generation (9.24 fold compared to RB) in nanoparticles (NPs). Then, DTPABT-HP NPs are applied in cell imaging via STED nanoscopy, especially visualizing the dynamic changes of lysosomes in the PDT process at ultrahigh resolution. After that, in vivo PDT was also conducted by DTPABT-HP NPs, resulting in significantly inhibited tumor growth, with an inhibition rate of 86%. The work here is beneficial to the design of multifunctional agents and the deep understanding of their phototheranostic mechanism in biological research.

Reblooming of the cis-Bis(2-phenylpyridine) Platinum(II) Complex: Synthesis Updating, Aggregation-Induced Emission, Electroluminescence, and Cell Imaging.

Studies on the syntheses, photophysical properties, and applications of cis-bis(2-phenylpyridine) platinum(II) complex (Pt(ppy)2) family are of great importance, but very limited progress has been achieved to date. Herein, a one-pot method was established for the syntheses of Pt(ppy)2-type complexes Pt-ppy and Pt-tBu. These two compounds were nonemissive in dilute solutions. However, they produced intense red and deep-red phosphorescence in the aggregation and film states, with lifetimes and quantum yields up to 1.92 µs and 70%, respectively, exhibiting unique aggregation-induced emission (AIE) characteristics. According to the experimental and theoretical studies, molecular configuration transformation (MCT) in the excited state may occur because of the d-d transition from the Pt center, causing nonradiative transitions in the solution. Nevertheless, the MCT would be largely restricted by the intermolecular interactions or rigid matrix, thereby enabling efficient phosphorescence in the aggregation state and in the PMMA films. Consequently, the AIE characteristics of Pt-ppy and Pt-tBu probably result from the restriction of molecular configuration transformation (RMCT). Due to the π-π and/or weak Pt-Pt interactions and the concentration-dependent emission characteristics, they emit deep-red and NIR emissions generated by excimer and/or MMLCT emitting species. Inspired by their AIE features, electroluminescence and cell imaging applications are explored. To the best of our knowledge, this is the first comprehensive study on the synthesis optimization, photophysical properties, AIE characteristics, and applications of the Pt(ppy)2-type complexes, which may rebloom the research studies on this type of Pt(II) complex family and provide valuable insights on the development of phosphorescent AIE metal-organic complexes.

Recent advances of organic emitters in deep-red light-emitting electrochemical cells.

Light-emitting electrochemical cells (LECs) are kind of easily fabricated and low-cost light-emitting devices that can efficiently convert electric power to light energy. Compared with blue and green LECs, the performance of deep-red LECs is limited by the high non-radiative rate of emitters in long-wavelength region. While various organic emitters with deep-red emission have been developed to construct high-performance LECs, including polymers, metal complexes, and organic luminous molecules (OLMs), but this is seldom summarized. Therefore, we overview the recent advances of organic emitters with emission at the deep-red region for LECs, and specifically highlight the molecular design approach and electrochemiluminescence performance. We hope that this review can act as a reference for further research in designing high-performance deep-red LECs.

Aggregation-Induced Emission by Molecular Design: A Route to High-Performance Light-Emitting Electrochemical Cells.

The emission efficiency of organic semiconductors (OSCs) often suffers from aggregation caused quenching (ACQ). An elegant solution is aggregation-induced emission (AIE), which constitutes the design of the OSC so that its morphology inhibits quenching π-π interactions and non-radiative motional deactivation. The light-emitting electrochemical cell (LEC) can be sustainably fabricated, but its function depends on motion of bulky ions in proximity of the OSC. It is therefore questionable whether the AIE morphology can be retained during LEC operation. Here, we synthesize two structurally similar OSCs, which are distinguished by that 1 features ACQ while 2 delivers AIE. Interestingly, we find that the AIE-LEC significantly outperforms the ACQ-LEC. We rationalize our finding by showing that the AIE morphology remains intact during LEC operation, and that it can feature appropriately sized free-volume voids for facile ion transport and suppressed non-radiative excitonic deactivation.

Recent advances in luminescent materials for super-resolution imaging via stimulated emission depletion nanoscopy.

Stimulated emission depletion (STED) nanoscopy is a promising fluorescence microscopy to detect unresolvable structures at the nanoscale level and then achieve a superior imaging resolution in materials science and biological research. However, in addition to the optimization of the microscope, luminescent materials in STED nanoscopy are also of great significance to obtain imaging, visualization and even long-term tracking at an ultra-high resolution (less than 100 nm), but this is seldom summarized. Based on this consideration, recent progress on STED fluorophores for super-resolution imaging is outlined here, including inorganic fluorophores, fluorescent proteins, organic luminescent materials, aggregation-induced emission (AIE) luminogens, and fluorescent nanoparticles. Characteristics of these aforementioned STED fluorophores are also included and compared to provide a deep understanding of the relationship between the properties in luminescent materials and their performance in STED imaging. According to the results on such luminescent materials, it is anticipated that guidelines to select proper probes and even develop new materials for super-resolution imaging via STED nanoscopy will be provided here, finally promoting the development of super-resolution imaging in both materials science and biological research.

A Facilely Synthesized Dual-State Emission Platform for Picric Acid Detection and Latent Fingerprint Visualization.

To achieve a highly efficient, dual-state emission platform for picric acid (PA) detection and latent fingerprint (LFP) visualization, flexible alkyl chains have been facilely attached to the commercial organic dye 3,4,9,10-perylenetetracarboxylic dianhydride to provide the target perylenetetracarboxylate molecules PTCA-C4, PTCA-C6, and PTCA-C12. Interestingly, all these molecules exhibited impressive fluorescence characteristics with high photoluminescence quantum yields (PLQYs) of around 93.0 % in dilute solution. Also, emissive features were observed in the solid state because close molecular packing is prevented by the alkyl chains, especially for PTCA-C6, which has a high PLQY value of 49.0 %. Benefiting from its impressive fluorescence performance in both solution and as aggregates, PTCA-C6 was used as a dual-state emission platform for PA detection and also LFP visualization. For example, double-responsive fluorescence quenching in solution was observed in PA detection studies, resulting in high quenching constants (KSV ) and also low limit-of-detection values. Furthermore, the fingerprint powder based on PTCA-C6 also presented an impressive performance on various substrates in terms of fluorescence intensity and resolution, clearly providing the specific fine details of latent fingerprints. These results demonstrate that the facilely synthesized PTCA-C6 with efficient dual-state emission exhibits great potential in the real-world applications of PA detection and LFP visualization.

A Strategy of "Self-Isolated Enhanced Emission" to Achieve Highly Emissive Dual-State Emission for Organic Luminescent Materials.

Currently, the commonly developed organic luminescent materials (OLMs) usually exhibit poor luminescent performance in aggregated solid states compared with their well-dissolved solution states, making it a tough goal to achieve the highly emissive dual-state emission. To overcome this limitation, a "self-isolated enhanced emission" (SIEE) strategy through flexible alkyl chains to suppress the emission-quenched π-π stacking in solids is proposed here and, based on this guideline, remarkable emission efficiency with photoluminescence quantum yields up to 99.72 % in solution and 77.46 % in the solid state are achieved for the SIEE constructed DBBT-C8, which is then successfully used in solid-state displays and data encryption.

Isomeric organic semiconductors containing fused-thiophene cores: molecular packing and charge transport.

Isomeric TF1 and TF2 with highly fused thiophene cores were designed and synthesized here, in which a highly planar molecular structure was obtained for TF1 with the face-to-face sulfur atoms in the lateral region and a twisted molecular backbone was observed for TF2 with the back-to-back sulfur atoms. It is worth noting that different intermolecular interactions dominated in TF1 and TF2 caused by their isomeric thiophene cores, in which strong π-π stacking was achieved for TF1, whereas sulphur-involved nonbonding intermolecular interactions dominated in TF2, leading to the different fluorescence behaviors and also the altered liquid crystalline phases. Finally, typical P-type charge transport behaviors were achieved in both TF1- and TF2-based solution-processed OFETs. Also owing to the much ordered molecular packing in TF1, a higher charge carrier mobility of 3.7 × 10-3 cm2 V-1 s-1 was achieved for TF1-based OFETs compared to TF2-based OFETs.

Expression of concern: Intelligent nanoflowers: a full tumor microenvironment-responsive multimodal cancer theranostic nanoplatform.

Expression of concern for 'Intelligent nanoflowers: a full tumor microenvironment-responsive multimodal cancer theranostic nanoplatform' by Xunan Jing et al., Nanoscale, 2019, 11, 15508-15518, https://doi.org/10.1039/C9NR04768A.

Less is More: Asymmetric D-A Type Agent to Achieve Dynamic Self-Assembled Nanoaggregates for Long-Acting Photodynamic Therapy.

To enhance the phototheranostic performance, agents with high reactive oxygen species (ROS) generation, good tumor-targeting ability, and prolonged retention are urgently needed. However, symmetric donor-acceptor (D-A) type agents usually produce spherical nanoaggregates, leading to good tumor targeting but inferior retention. Rod-like nanoaggregates are desired to extend their retention in tumors; however, this remains a challenge. In particular, agents with dynamically changeable shapes that integrate merits of different morphologies are seldomly reported. Therefore, self-assembled organic nanoaggregates with smart shape tunability are designed here using an asymmetric D-A type TIBT. The photoluminescence quantum yield in solids is up to 52.24% for TIBT. TIBT also exhibits high ROS generation in corresponding nanoaggregates (TIBT-NCs). Moreover, dynamic self-assembly in shape changing from nanospheres to nanorods occurrs in TIBT-NCs, contributing to the enhancement of ROS quantum yield from 0.55 to 0.72. In addition, dynamic self-assembly can be observed for both in vitro and in vivo, conferring TIBT-NCs with strong tumor targeting and prolonged retention. Finally, efficient photodynamic therapy to inhibit tumor growth is achieved in TIBT-NCs, with an inhibition rate of 90%. This work demonstrates that asymmetric D-A type agents can play significant roles in forming self-assembled organic nanoaggregates, thus showing great potential in long-acting cancer therapy.

Corrigendum: Assessing heterogeneity of patient and health system delay among TB in a population with internal migrants in China.

[This corrects the article DOI: 10.3389/fpubh.2024.1354515.].

Spatial pattern of isoniazid-resistant tuberculosis and its associated factors among a population with migrants in China: a retrospective population-based study.

Background: Isoniazid-resistant, rifampicin-susceptible tuberculosis (Hr-TB) globally exhibits a high prevalence and serves as a potential precursor to multidrug-resistant tuberculosis (MDR-TB). Recognizing the spatial distribution of Hr-TB and identifying associated factors can provide strategic entry points for interventions aimed at early detection of Hr-TB and prevention of its progression to MDR-TB. This study aims to analyze spatial patterns and identify socioeconomic, demographic, and healthcare factors associated with Hr-TB in Shanghai at the county level. Method: We conducted a retrospective study utilizing data from TB patients with available Drug Susceptible Test (DST) results in Shanghai from 2010 to 2016. Spatial autocorrelation was explored using Global Moran's I and Getis-Ord Gi∗ statistics. A Bayesian hierarchical model with spatial effects was developed using the INLA package in R software to identify potential factors associated with Hr-TB at the county level. Results: A total of 8,865 TB patients with DST were included in this analysis. Among 758 Hr-TB patients, 622 (82.06%) were new cases without any previous treatment history. The drug-resistant rate of Hr-TB among new TB cases in Shanghai stood at 7.20% (622/8014), while for previously treated cases, the rate was 15.98% (136/851). Hotspot areas of Hr-TB were predominantly situated in southwestern Shanghai. Factors positively associated with Hr-TB included the percentage of older adult individuals (RR = 3.93, 95% Crl:1.93-8.03), the percentage of internal migrants (RR = 1.35, 95% Crl:1.15-1.35), and the number of healthcare institutions per 100 population (RR = 1.17, 95% Crl:1.02-1.34). Conclusion: We observed a spatial heterogeneity of Hr-TB in Shanghai, with hotspots in the Songjiang and Minhang districts. Based on the results of the models, the internal migrant population and older adult individuals in Shanghai may be contributing factors to the emergence of areas with high Hr-TB notification rates. Given these insights, we advocate for targeted interventions, especially in identified high-risk hotspots and high-risk areas.

Assessing heterogeneity of patient and health system delay among TB in a population with internal migrants in China.

Backgrounds: The diagnostic delay of tuberculosis (TB) contributes to further transmission and impedes the implementation of the End TB Strategy. Therefore, we aimed to describe the characteristics of patient delay, health system delay, and total delay among TB patients in Shanghai, identify areas at high risk for delay, and explore the potential factors of long delay at individual and spatial levels. Method: The study included TB patients among migrants and residents in Shanghai between January 2010 and December 2018. Patient and health system delays exceeding 14 days and total delays exceeding 28 days were defined as long delays. Time trends of long delays were evaluated by Joinpoint regression. Multivariable logistic regression analysis was employed to analyze influencing factors of long delays. Spatial analysis of delays was conducted using ArcGIS, and the hierarchical Bayesian spatial model was utilized to explore associated spatial factors. Results: Overall, 61,050 TB patients were notified during the study period. Median patient, health system, and total delays were 12 days (IQR: 3-26), 9 days (IQR: 4-18), and 27 days (IQR: 15-43), respectively. Migrants, females, older adults, symptomatic visits to TB-designated facilities, and pathogen-positive were associated with longer patient delays, while pathogen-negative, active case findings and symptomatic visits to non-TB-designated facilities were associated with long health system delays (LHD). Spatial analysis revealed Chongming Island was a hotspot for patient delay, while western areas of Shanghai, with a high proportion of internal migrants and industrial parks, were at high risk for LHD. The application of rapid molecular diagnostic methods was associated with reduced health system delays. Conclusion: Despite a relatively shorter diagnostic delay of TB than in the other regions in China, there was vital social-demographic and spatial heterogeneity in the occurrence of long delays in Shanghai. While the active case finding and rapid molecular diagnosis reduced the delay, novel targeted interventions are still required to address the challenges of TB diagnosis among both migrants and residents in this urban setting.

Chitosan-based hemostatic sponges as new generation hemostatic materials for uncontrolled bleeding emergency: Modification, composition, and applications.

The choice of hemostatic technique is a curial concern for surgery and as first-aid treatment in combat. To treat uncontrolled bleeding in complex wound environments, chitosan-based hemostatic sponges have attracted significant attention in recent years because of the excellent biocompatibility, degradability, hemostasis and antibacterial properties of chitosan and their unique sponge-like morphology for high fluid absorption rate and priority aggregation of blood cells/platelets to achieve rapid hemostasis. In this review, we provide a historical perspective on the use of chitosan hemostatic sponges as the new generation of hemostatic materials for uncontrolled bleeding emergencies in complex wounds. We summarize the modification of chitosan, review the current status of preparation protocols of chitosan sponges based on various composite systems, and highlight the recent achievements on the detailed breakdown of the existing chitosan sponges to present the relationship between their composition, physical properties, and hemostatic capacity. Finally, the future opportunities and challenges of chitosan hemostatic sponges are also proposed.

Aggregation-induced emission (AIE)-active metallacycles with near-infrared emission for photodynamic therapy.

Multifunctional metallacycles with solid-state emission are highly important in cancer therapy. Here, an aggregation-induced emission (AIE)-active metallacycle of DTPABT-MC-R is developed with efficient emission in the NIR region in the solid state (PLQYs = 4.92%). DTPABT-MC-R-based nanoparticles also display excellent photo-stability, and impressive photosensitive characteristics (ROS efficiency = 10.74%), finally leading to applications in cellular imaging and photodynamic therapy (PDT).

Retraction: A tumor-microenvironment fully responsive nano-platform for MRI-guided photodynamic and photothermal synergistic therapy.

Retraction of 'A tumor-microenvironment fully responsive nano-platform for MRI-guided photodynamic and photothermal synergistic therapy' by Daquan Wang et al., J. Mater. Chem. B, 2020, 8, 8271-8281, https://doi.org/10.1039/D0TB01373K.

Facilely prepared aggregation-induced emission (AIE) nanocrystals with deep-red emission for super-resolution imaging.

Organic nanocrystals (NCs) with high brightness are highly desirable for biological imaging. However, the preparation of NCs by a facile and fast method is still challenging. Herein, an aggregation-induced emission (AIE) luminogen of 4,4'-(5,6-difluorobenzo[c][1,2,5]thiadiazole-4,7-diyl)bis(N,N-bis(4-methoxyphenyl)aniline) (DTPA-BT-F) in the deep-red region is designed with intensive crystalline features to obtain NCs by kinetically controlled nanoprecipitation. The prepared AIE NCs with high brightness and good photo-stability are then applied in super-resolution imaging via stimulated emission depletion (STED) nanoscopy. As observed, the nanostructures in lysosomes of both fixed and live cells are well visualized with superior lateral resolutions under STED nanoscopy (full width at half maximum values, 107 and 108 nm) in contrast to that in confocal imaging (548 and 740 nm). More importantly, dynamic monitoring and long-term tracking of lysosomal movements in live HeLa cells, such as lysosomal contact, can also be carried out by using DTPA-BT-F NCs at a superior resolution. To the best of our knowledge, this is the first case of AIE NCs prepared by nanoprecipitation for STED nanoscopy, thus providing a new strategy to develop high performance imaging agents for super-resolution imaging.

Aggregation-Induced Emission (AIE) in Super-resolution Imaging: Cationic AIE Luminogens (AIEgens) for Tunable Organelle-Specific Imaging and Dynamic Tracking in Nanometer Scale.

Organelle-specific imaging and dynamic tracking in ultrahigh resolution is essential for understanding their functions in biological research, but this remains a challenge. Therefore, a facile strategy by utilizing anion-π+ interactions is proposed here to construct an aggregation-induced emission luminogen (AIEgen) of DTPAP-P, not only restricting the intramolecular motions but also blocking their strong π-π interactions. DTPAP-P exhibits a high photoluminescence quantum yield (PLQY) of 35.04% in solids, favorable photostability and biocompatibility, indicating its potential application in super-resolution imaging (SRI) via stimulated emission depletion (STED) nanoscopy. It is also observed that this cationic DTPAP-P can specifically target to mitochondria or nucleus dependent on the cell status, resulting in tunable organelle-specific imaging in nanometer scale. In live cells, mitochondria-specific imaging and their dynamic monitoring (fission and fusion) can be obtained in ultrahigh resolution with a full-width-at-half-maximum (fwhm) value of only 165 nm by STED nanoscopy. This is about one-sixth of the fwhm value in confocal microscopy (1028 nm). However, a migration process occurs for fixed cells from mitochondria to nucleus under light activation (405 nm), leading to nucleus-targeted super-resolution imaging (fwhm= 184 nm). These findings indicate that tunable organelle-specific imaging and dynamic tracking by a single AIEgen at a superior resolution can be achieved in our case here via STED nanoscopy, thus providing an efficient method to further understand organelle's functions and roles in biological research.

Recent Advances on Organic Fluorescent Probes for Stimulated Emission Depletion (STED) Microscopy.

Stimulated emission depletion (STED) microscopy has become a useful tool for visualization and dynamic monitoring at an ultra-high resolution in biological research and material science. For STED technology, fluorescent probes are irreplaceable in the imaging process. Among these probes, organic fluorescent probes have superior photo-stability, high brightness, large Stokes' shifts and excellent biocompatibility, thus are widely applied in STED microscopy. Based on this consideration, this review presents the recent advances on organic fluorescent probes for STED microscopy, including typical organic fluorescent probes, aggregation-induced emission luminogens (AIEgens), polymer dots, and other nanoparticles. The applications of organic fluorescent probes in biological imaging, such as in live-cell, live-tissue, and in vivo imaging, as well as in material monitoring at the nanoscale using STED microscopy, are also included. This review provides the guidelines for the design of new materials that can be used to enhance the imaging performance of STED microscopy, thus leading to real-world applications.

A tumor-microenvironment fully responsive nano-platform for MRI-guided photodynamic and photothermal synergistic therapy.

Multifunctional intelligent theranostics agents are promising for next-generation oncotherapy. We fabricated a tumor-microenvironment (TME)-responsive carbon nanotube (CNT)-based nanoplatform for T1 weighted magnetic resonance imaging (MRI)-guided synergistic photodynamic and photothermal therapy (PDT and PTT). CNTs convert near infrared (NIR) radiation into hyperthermia for PTT, and can effectively deliver their cargo into cells due to their unique 1D nanostructure. The CNT@MnO2-PEG@Ce6 nanomedicine was internalized into tumor cells, and rapidly released the photosensitizer (Ce6) in response to the low pH and high glutathione (GSH) levels characteristic of the TME. The degradation of the MnO2 layer under the same conditions released Mn2+ for T1-MRI. Furthermore, catalytic decomposition of the excess H2O2 into oxygen by MnO2 enhanced the efficacy of PDT, relieved hypoxia, and increased consumption of superfluous GSH to mitigate the effects of excessive reactive oxygen species (ROS) generation during PDT. MRI-guided PDT and PTT synergistically inhibited tumor cell growth in vitro, and ablated tumors in vivo. The side effects were negligible due to specific tumor cell targeting via surface modification with folic-PEG, and enhanced permeability and retention. Taken together, CNT@MnO2-PEG is a fully TME-responsive theranostics nanoplatform for targeted tumor ablation and real-time disease tracking.