Selective Photoreduction of CO2 to CH4 Triggered by Metal-Vacancy Pair Sites.

Selectively achieving the photoreduction of carbon dioxide (CO2) to methane (CH4) remains a significant challenge, which primarily arises from the complexity of the protonation process. In this work, we designed metal-vacancy pair sites in defective metal oxide semiconductors, which anchor the reactive intermediates with a bridged linkage for the selective protonation to produce CH4. As an example, oxygen-deficient Nb2O5 nanosheets are synthesized, in which the niobium-oxygen vacancy pair sites are demonstrated by X-ray photoelectron spectroscopy and electron paramagnetic resonance spectra. In situ Fourier transform infrared spectroscopy monitors the *CH3O intermediate, a key intermediate for CH4 production, during the CO2 photoreduction in oxygen-deficient Nb2O5 nanosheets. Importantly, the built metal-vacancy pair sites regulate the *CH3O formation step as a spontaneous process, making the reduction of CO2 to CH4 the preferred method. Therefore, the oxygen-deficient Nb2O5 nanosheets exhibit a CH4 formation rate of 19.14 µmol g-1 h-1, with an electron selectivity of ∼94.1%.

Nitrogen Doping-Roused Synergistic Active Sites in Perovskite Enabling Highly Selective CO2 Photoreduction into CH4.

The intricate protonation process in carbon dioxide reduction usually makes the product unpredictable. Thus, it is significant to control the reactive intermediates to manipulate the reaction steps. Here, we propose that the synergistic La-Ti active sites in the N-La2Ti2O7 nanosheets enable the highly selective carbon dioxide photoreduction into methane. In the photoreduction of CO2 over N-La2Ti2O7 nanosheets, in situ Fourier transform infrared spectra are utilized to monitor the *CH3O intermediate, pivotal for methane production, whereas such monitoring is not conducted for La2Ti2O7 nanosheets. Also, theoretical calculations testify to the increased charge densities on the Ti and La atoms and the regulated formation energy barrier of *CO and *CH3O intermediates by the constructed synergistic active sites. Accordingly, the methane formation rate of 7.97 µL h-1 exhibited by the N-La2Ti2O7 nanosheets, along with an electron selectivity of 96.6%, exceeds that of most previously reported catalysts under similar conditions.

High-Rate and Selective C2H6-to-C2H4 Photodehydrogenation Enabled by Partially Oxidized Pdδ+ Species Anchored on ZnO Nanosheets under Mild Conditions.

Photocatalytic C2H6-to-C2H4 conversion is very promising, yet it remains a long-lasting challenge due to the high C-H bond dissociation energy of 420 kJ mol-1. Herein, partially oxidized Pdδ+ species anchored on ZnO nanosheets are designed to weaken the C-H bond by the electron interaction between Pdδ+ species and H atoms, with efforts to achieve high-rate and selective C2H6-to-C2H4 conversion. X-ray photoelectron spectra, Bader charge calculations, and electronic localization function demonstrate the presence of partially oxidized Pdδ+ sites, while quasi-in situ X-ray photoelectron spectra disclose the Pdδ+ sites initially adopt and then donate the photoexcited electrons for C2H6 dehydrogenation. In situ electron paramagnetic resonance spectra, in situ Fourier transform infrared spectra, and trapping agent experiments verify C2H6 initially converts to CH3CH2OH via ·OH radicals, then dehydroxylates to CH3CH2· and finally to C2H4, accompanied by H2 production. Density-functional theory calculations elucidate that loading Pd site can lengthen the C-H bond of C2H6 from 1.10 to 1.12 Å, which favors the C-H bond breakage, affirmed by a lowered energy barrier of 0.04 eV. As a result, the optimized 5.87% Pd-ZnO nanosheets achieve a high C2H4 yield of 16.32 mmol g-1 with a 94.83% selectivity as well as a H2 yield of 14.49 mmol g-1 from C2H6 dehydrogenation in 4 h, outperforming all the previously reported photocatalysts under similar conditions.

Breaking the Activity-Selectivity Trade-off for CH4-to-C2H6 Photoconversion.

Photocatalytic conversion of methane (CH4) to ethane (C2H6) has attracted extensive attention from academia and industry. Typically, the traditional oxidative coupling of CH4 (OCM) reaches a high C2H6 productivity, yet the inevitable overoxidation limits the target product selectivity. Although the traditional nonoxidative coupling of CH4 (NOCM) can improve the product selectivity, it still encounters unsatisfied activity, arising from being thermodynamically unfavorable. To break the activity-selectivity trade-off, we propose a conceptually new mechanism of H2O2-triggered CH4 coupling, where the H2O2-derived ·OH radicals are rapidly consumed for activating CH4 into ·CH3 radicals exothermically, which bypasses the endothermic steps of the direct CH4 activation by photoholes and the interaction between ·CH3 and ·OH radicals, affirmed by in situ characterization techniques, femtosecond transient absorption spectroscopy, and density-functional theory calculation. By this pathway, the designed Au-WO3 nanosheets achieve unprecedented C2H6 productivity of 76.3 mol molAu-1 h-1 with 95.2% selectivity, and TON of 1542.7 (TOF = 77.1 h-1) in a self-designed flow reactor, outperforming previously reported photocatalysts regardless of OCM and NOCM pathways. Also, under outdoor natural sunlight irradiation, the Au-WO3 nanosheets exhibit similar activity and selectivity toward C2H6 production, showing the possibility for practical applications. Interestingly, this strategy can be applied to other various photocatalysts (Au-WO3, Au-TiO2, Au-CeO2, Pd-WO3, and Ag-WO3), showing a certain universality. It is expected that the proposed mechanism adds another layer to our understanding of CH4-to-C2H6 conversion.

Rapid Yet Efficient Reduction of Graphene Oxide Triggered by Semi-Molten Metals.

Reduced graphene oxide (rGO) has garnered extensive attention as electrodes, sensors, and membranes, necessitating the efficient reduction of graphene oxide (GO) for optimal performance. In this work, a swift reduction of GO that involves bringing GO foam in contact with semi-molten metals like tin (Sn) and lithium (Li) is presented. These findings reveal that the electrical resistance of GO foam is significantly diminished by its interaction with these metals, even in dry air. Taking inspiration from this technique, Sn foil is employed to encase the GO foam, followed by a calcination in 15 vol% H2 /Ar environment at 235 °C to fabricate the rGO, which demonstrates a remarkably lower electrical resistivity of 0.42 Ω cm when compared to the chemically reduced GO via hydrazine hydrate (650 Ω cm). The reduction mechanism entails the migration of Sn on GO and its subsequent reaction with oxygen functional groups. SnO/Sn(OH)2 formed from the reaction can be subsequently reversed through reduction by H2 to Sn. Utilizing this rGO as the host material for a sulfur cathode, a lithium-sulfur battery is constructed that displays a specific capacity of 1146 mAh g-1 and maintains a capacity retention of 68.4% after 300 cycles at a rate of 0.2 C.

Selective CO2 Photoreduction Enabled by Water-stable Cu-based Metal-organic Framework Nanoribbons.

The goal of photocatalytic CO2 reduction system is to achieve near 100 % selectivity for the desirable product with reasonably high yield and stability. Here, two-dimensional metal-organic frameworks are constructed with abundant and uniform monometallic active sites, aiming to be an emerged platform for efficient and selective CO2 reduction. As an example, water-stable Cu-based metal-organic framework nanoribbons with coordinatively unsaturated single CuII sites are first fabricated, evidenced by X-ray diffraction patterns and X-ray absorption spectroscopy. In situ Fourier-transform infrared spectra and Gibbs free energy calculations unravel the formation of the key intermediate COOH* and CO* is an exothermic and spontaneous process, whereas the competitive hydrogen evolution reaction is endothermic and non-spontaneous, which accounts for the selective CO2 reduction. As a result, in an aqueous solution containing 1 mol L-1 KHCO3 and without any sacrifice reagent, the water-stable Cu-based metal-organic framework nanoribbons exhibited an average CO yield of 82 µmol g-1 h-1 with the selectivity up to 97 % during 72 h cycling test, which is comparable to other reported photocatalysts under similar conditions.

Brain and the whole-body bone imaging appearances in Menkes disease: a case report and literature review.

BACKGROUND: Menkes disease (MD) is a rare, inherited, multisystemic copper metabolism disorder. Classical Menkes disease is characterized by low serum copper and ceruloplasmin concentrations, leading to multiple abnormalities in the whole-body, especially in connective tissue and central nervous system. However, serum copper and ceruloplasmin levels are not reliable diagnostic biomarkers due to the low concentrations in healthy newborns either. The featured imaging manifestations play an important role in diagnosing Menkes disease. To our knowledge, there are few reports on the systemic imaging manifestations of Menkes disease. CASE PRESENTATION: A 4-month-old male patient presented with recurrent seizures. He had cognitive, intellectual, growth, gross motor, precision movement, and language developmental lags. The patient's hemoglobin and serum ceruloplasmin level were low. On MRI, increased intracranial vascular tortuosity, cerebral and cerebellar atrophy, white matter changes, and basal ganglia abnormalities were observed. Plain radiograph revealed wormian bones, rib flaring, metaphyseal spurring, and periosteal reactions in the long bones of the limbs. A pathogenic variant in ATP7A gene was identified in the patient, so he was confirmed the diagnosis of Menkes disease. His symptoms did not improve despite symptomatic and supportive treatment during his hospitalization. Unfortunately, the infant died 3 months after leaving hospital. CONCLUSION: A comprehensive and intuitive understanding of the disease's imaging manifestations can help clinicians to identify the disease and avoid delays in care.

Progress and perspective for conversion of plastic wastes into valuable chemicals.

Today, discarded plastics in nature have caused serious "white pollution", however these plastic wastes contain abundant carbon resources that could serve as the feedstock to produce commodities. Because of this, it is requisite to convert these plastic wastes into valuable chemicals. Herein, the state-of-the-art techniques for plastic conversion are divided into two categories, those performed under violent conditions and mild conditions, in which the conversion mechanisms are discussed. The strategies under violent conditions are closer to practical application thanks to their excellent conversion efficiencies, while the strategies under mild conditions are more environmentally friendly, showing enormous development potential in the future. We summarize in detail the pyrolysis, hydropyrolysis, solvolysis and microwave-initiated catalysis for bond cleavage in plastic wastes at temperatures ranging from 448 to 973 K. Also, we overview the photocatalysis, electrocatalysis and biocatalysis for bond cleavage in plastic wastes at near and even normal temperature and pressure. Finally, we present some suggestions and outlooks concerning the improvement of current techniques and in-depth mechanisms of investigation for conversion of plastics into valuable chemicals.

Light-Driven C-C Coupling for Targeted Synthesis of CH3 COOH with Nearly 100 % Selectivity from CO2.

Targeted synthesis of acetic acid (CH3 COOH) from CO2 photoreduction under mild conditions mainly limits by the kinetic challenge of the C-C coupling. Herein, we utilized doping engineering to build charge-asymmetrical metal pair sites for boosted C-C coupling, enhancing the activity and selectivity of CO2 photoreduction towards CH3 COOH. As a prototype, the Pd doped Co3 O4 atomic layers are synthesized, where the established charge-asymmetrical cobalt pair sites are verified by X-ray photoelectron spectroscopy and X-ray absorption near edge spectroscopy spectra. Theoretical calculations not only reveal the charge-asymmetrical cobalt pair sites caused by Pd atom doping, but also manifest the promoted C-C coupling of double *COOH intermediates through shortening of the coupled C-C bond distance from 1.54 to 1.52 Å and lowering their formation energy barrier from 0.77 to 0.33 eV. Importantly, the decreased reaction energy barrier from the protonation of two*COOH into *CO intermediates for the Pd-Co3 O4 atomic layer slab is 0.49 eV, higher than that of the Co3 O4 atomic layer slab (0.41 eV). Therefore, the Pd-Co3 O4 atomic layers exhibit the CH3 COOH evolution rate of ca. 13.8 µmol g-1 h-1 with near 100% selectivity, both of which outperform all previously reported single photocatalysts for CO2 photoreduction towards CH3 COOH under similar conditions.

Design of Size-Controlled Sulfur Nanoparticle Cathodes for Lithium-Sulfur Aviation Batteries.

Lithium-sulfur (Li-S) battery has been considered as a strong contender for commercial aerospace battery, but the commercialization requires Ah-level pouch cells with both efficient discharge at high rates and ultra-high energy density. In this paper, the application of lithium-sulfur batteries for powering drones by using the cathode of highly dispersed sulfur nanoparticles with well-controlled particle sizes have been realized. The sulfur nanoparticles are prepared by a precipitation method in an eco-friendly and efficient way, and loaded on graphene oxide-cetyltrimethylammonium bromide by molecular grafting to realize a large-scale fabrication of sulfur-based cathodes with superior electrochemical performance. A button cell based on the cathode exhibits an excellent discharge capacity of 62.8 mAh cm-2 at a high sulfur loading of 60 mg cm-2 (i.e., 1046.7 mAh g-1 ). The assembled miniature pouch cell (PCmini) shows a discharge capacity of 130 mAh g-1 , while the formed Ah-level pouch cell (PCAh) achieves energy density of 307 Wh kg-1 at 0.3C and 92 Wh kg-1 at 4C. Especially, a four-axis propeller drone powered by the PC has successfully completed a long flight (>3 min) at high altitudes, demonstrating the practical applicability as aviation batteries.

Direct Polyethylene Photoreforming into Exclusive Liquid Fuel over Charge-Asymmetrical Dual Sites under Mild Conditions.

Direct polyethylene photoreforming to high-energy-density C2 fuels under mild conditions is of great significance and still faces a huge challenge, which is partly attributed to the extreme instability of *CH2CH2 adsorbed on the traditional catalysts with single catalytic sites. Herein, charge-asymmetrical dual sites are designed to boost the adsorption of *CH2CH2 for direct polyethylene photoreforming into C2 fuels under normal temperature and pressure. As a prototype, the synthetic Zr-doped CoFe2O4 quantum dots with charge-asymmetrical dual metal sites realize direct polyethylene photoreforming into acetic acid, with 100% selectivity of liquid fuel and the evolution rate of 1.10 mmol g-1 h-1, outperforming those of most previously reported photocatalysts under similar conditions. In situ X-ray photoelectron spectra, density-functional-theory calculations, and control experiments reveal the charge-asymmetrical Zr-Fe dual sites may act as the predominate catalytic sites, which can simultaneously bond with the *CH2CH2 intermediates for the following stepwise oxidation to form C2 products.

Selective CO2 -to-C2 H4 Photoconversion Enabled by Oxygen-Mediated Triatomic Sites in Partially Oxidized Bimetallic Sulfide.

Selective CO2 photoreduction into C2 fuels under mild conditions suffers from low product yield and poor selectivity owing to the kinetic challenge of C-C coupling. Here, triatomic sites are introduced into bimetallic sulfide to promote C-C coupling for selectively forming C2 products. As an example, FeCoS2 atomic layers with different oxidation degrees are first synthesized, demonstrated by X-ray photoelectron spectroscopy and X-ray absorption near edge spectroscopy spectra. Both experiment and theoretical calculation verify more charges aggregate around the introduced oxygen atom, which enables the original Co-Fe dual sites to turn into Co-O-Fe triatomic sites, thus promoting C-C coupling of double *COOH intermediates. Accordingly, the mildly oxidized FeCoS2 atomic layers exhibit C2 H4 formation rate of 20.1 µmol g-1 h-1 , with the product selectivity and electron selectivity of 82.9 % and 96.7 %, outperforming most previously reported photocatalysts under similar conditions.

Room-Temperature Photooxidation of CH4 to CH3OH with Nearly 100% Selectivity over Hetero-ZnO/Fe2O3 Porous Nanosheets.

The huge challenge for CH4 photooxidation into CH3OH lies in the activation of the inert C-H bond and the inhibition of CH3OH overoxidation. Herein, we design two-dimensional in-plane Z-scheme heterostructures composed of two different metal oxides, with efforts to polarize the symmetrical CH4 molecules and strengthen the O-H bond in CH3OH. As a prototype, we first fabricate ZnO/Fe2O3 porous nanosheets, where high-resolution transmission electron microscopy and in situ X-ray photoelectron spectroscopy affirm their in-plane Z-scheme heterostructure. In situ Fourier transform infrared spectra and in situ electron paramagnetic resonance spectra demonstrate their higher amount of ·CH3 radicals relative to the pristine ZnO porous nanosheets, in which density functional theory calculations validate that the high local charge accumulation on Fe sites lowers the CH4 adsorption energy from 0.14 to 0.06 eV. Moreover, the charge-accumulated Fe sites strengthen the polarity of the O-H bond in CH3OH through transferring electrons to the O atoms, confirmed by the increased barrier from 0.30 to 2.63 eV for *CH3O formation, which inhibits the homolytic O-H bond cleavage and thus suppresses CH3OH overoxidation. Accordingly, the CH3OH selectivity over ZnO/Fe2O3 porous nanosheets reaches up to nearly 100% with an activity of 178.3 µmol-1 gcat-1, outperforming previously reported photocatalysts without adding any oxidants under room temperature and ambient pressure.

Selective CO2 Photoreduction to CH4 via Pdδ+ -Assisted Hydrodeoxygenation over CeO2 Nanosheets.

Here, noble-metal-doped two-dimensional metal oxide nanosheets are designed to realize selective CO2 photoreduction to CH4 . As a prototype, Pd-doped CeO2 nanosheets are fabricated, where the active sites of Pdδ+ (2<δ<4) and Ce3+ -Ov are revealed by quasi in situ X-ray photoelectron spectra and in situ electron paramagnetic resonance spectra. Moreover, in situ Fourier-transform infrared spectra of D2 O photodissociation and desorption verify the existence of the Pd-OD bond, implying that Pdδ+ sites can participate in water oxidation to deliver H* species for facilitating the protonation of the intermediates. Furthermore, theoretical calculations suggest the Pd doping could regulate the formation energy barrier of the key intermediates CO* and CH3 O*, thus making CO2 reduction to CH4 become the favorable process. Accordingly, Pd-doped CeO2 nanosheets achieve nearly 100 % CH4 selectivity of CO2 photoreduction, with the raising CH4 evolution rate of 41.6 µmol g-1 h-1 .

Asymmetric Triple-Atom Sites Confined in Ternary Oxide Enabling Selective CO2 Photothermal Reduction to Acetate.

Light-induced heat is largely neglected in traditional photocatalytic systems, especially for the thermodynamically and kinetically challenging CO2 reduction to C2 fuels. Herein, we first design asymmetric Metal1-O-Metal2 triple-atom sites confined in phenakite to facilitate C-C coupling and employ photoinduced heat to increase molecular thermal vibration and accelerate CO2 reduction to C2 fuels. Using O-vacancy-rich Zn2GeO4 nanobelts as prototypes, quasi in situ Raman spectra disclose the Zn-O-Ge triatomic sites are likely the reactive sites. Density functional theory calculations reveal that the asymmetric Zn-O-Ge sites could promote C-C coupling through inducing distinct charge distributions of neighboring C1 intermediates, whereas the created O vacancies could lower the energy barrier of the rate-determining hydrogenation step from 1.46 to 0.67 eV. Catalytic performances under different testing conditions demonstrate that light initiates the CO2 reduction reaction. In situ Fourier-transform infrared spectra and D2O kinetic isotopic effect experiments disclose that light-induced heat kinetically triggers C-C coupling and accelerates OCCO* hydrogenation via providing abundant hydrogen species. Consequently, in a simulated air atmosphere under 0.1 W/cm2 illumination at 348 K, the O-vacancy-rich Zn2GeO4 nanobelts demonstrate an acetate output of 12.7 µmol g-1 h-1, a high acetate selectivity of 66.9%, a considerable CO2-to-CH3COOH conversion ratio of 29.95%, and a stability of up to 220 h.

Social exclusion and suicide intention in Chinese college students: a moderated mediation model.

Given the growing incidence rates of suicide among college students and the potential lifelong consequences of suicide, it is imperative to better understand the factors that reduce the rates at which college students in a clinical sample engage in suicide. This study examines the relationship between social exclusion and suicide intention, the mediating effect of depression, and the moderating effect of meaning in life. Two hundred and ninety-nine Chinese college students, aged from 18 to 22 years (56.86% female, M age = 20.14, SD = 1.27) completed questionnaires assessing their social exclusion, suicide intention, depression, and meaning in life. The result revealed that social exclusion was positively associated with suicide intention, and depression mediated this relationship. In addition, this mediating effect of depression was moderated by meaning in life. That is, the mediation effect was stronger for students with a higher level of meaning in life. These findings provide educational suggestions for preventing and intervening in suicide intention among college students.

Gelatin/polychromatic materials microgels enhanced by carnosic acid inclusions and its application in 2D pattern printing and multi-nozzle food 3D printing.

Natural polychromatic biomaterials (like carminic acid and gardenia yellow) possess coloring merits and functionality, but are instable under light and heat. Self-assembly of gelatin and polychromatic materials could be induced by carnosic acid inclusions, illustrating great potential in food application. Antioxidant properties, pigment retention rates, UV irradiation stability, rheological properties, and physical resistances (oil, ethanol, heat and microwave) of samples were improved by carnosic acid inclusions, owing to the newly formed hydrogen bonding and electrostatic interactions (UV spectrum, particle size, zeta potential, FTIR, XPS and SEM). The improved properties contributed to the 2D printed pattern stability and the applicability for producing specialized products with high printability and fastness. On the basis of Subtractive Color-Mixing Principle, further three-dimensional dyeing microgel systems were built and modulated; it could functionalize bean paste/carboxymethyl-cellulose food systems, maintain the excellent self-supporting ability & mechanical strength, and promote single/dual-nozzle 3D printing application. Therefore, the self-assembled gelatin/polychromatic materials/carnosic acid microgel samples could not only achieve outstanding 2D printed pattern stability, and could be also promisingly applied in single/dual-nozzle 3D printing for modern innovative, creative food fields.

Effect of polyethylene glycol on polysaccharides: From molecular modification, composite matrixes, synergetic properties to embeddable application in food fields.

Polyethylene glycol (PEG) is a flexible, water-soluble, non-immunogenic, as well as biocompatible polymer, and it could synergize with polysaccharides for food applications. The molecular modification strategies, including covalent bond interactions (amino groups, carboxyl groups, aldehyde groups, tosylate groups, etc.), and non-covalent bond interactions (hydrogen bonding, electrostatic interactions, etc.) on PEG molecular chains are discussed. Its versatile structure, group modifiability, and amphiphilic block buildability could improve the functions of polysaccharides (e.g., chitosan, cellulose, starch, alginate, etc.) and adjust the properties of combined PEG/polysaccharides with outstanding chain tunability and matrix processability owing to plasticizing effects, compatibilizing effects, steric stabilizing effects and excluded volume effects by PEG, for achieving the diverse performance targets. The synergetic properties of PEG/polysaccharides with remarkable architecture were summarized, including mechanical properties, antibacterial activity, antioxidant performance, self-healing properties, carrier and delivery characteristics. The PEG/polysaccharides with excellent combined properties and embeddable merits illustrate potential applications including food packaging, food intelligent indication/detection, food 3D printing and nutraceutical food absorption. Additionally, prospects (like food innovation and preferable nutrient utilization) and key challenges (like structure-effectiveness-applicability relationship) for PEG/polysaccharides are proposed and addressed for food fields.

Recent advances of silk fibroin materials: From molecular modification and matrix enhancement to possible encapsulation-related functional food applications.

Silk fibroin materials are emergingly explored for food applications due to their inherent properties including safe oral consumption, biocompatibility, gelatinization, antioxidant performance, and mechanical properties. However, silk fibroin possesses drawbacks like brittleness owing to its inherent specific composition and structure, which limit their applications in this field. This review discusses current progress about molecular modification methods on silk fibroin such as extraction, blending, self-assembly, enzymatic catalysis, etc., to address these limitations and improve their physical/chemical properties. It also summarizes matrix enhancement strategies including freeze drying, spray drying, electrospinning/electrospraying, microfluidic spinning/wheel spinning, desolvation and supercritical fluid, to generate nano-, submicron-, micron-, or bulk-scale materials. It finally highlights the food applications of silk fibroin materials, including nutraceutical improvement, emulsions, enzyme immobilization and 3D/4D printing. This review also provides insights on potential opportunities (like safe modification, toxicity risk evaluation, and digestion conditions) and possibilities (like digital additive manufacturing) in functional food industry.

Effect of electrostatic repulsion on barrier properties and thermal performance of gelatin films by carboxymethyl starch, and application in food cooking.

Carboxymethyl starch (CST) was introduced to improve gelatin films and its practical application as edible high-performance films for food packaging and cooking was also investigated. The gelatin films modified by carboxymethyl starch exhibited the transparent appearance, tensile strength, barrier properties (oxygen, water vapor and UV light), and thermal performance (TGA, thermal shrinkage and heat-sealing strength). Resulting from the effect of electrostatic interaction modes on the properties of films, electrostatic repulsion could surpass electrostatic attraction in improving the tensile strength, oxygen barrier property and thermal stability of the films probably due to extensive physical entanglement without aggregation. Analysis of FTIR, zeta potential, interfacial dilatational rheology, shear rheological properties, XRD, Raman, SEM and AFM suggested that hydrogen bonding and electrostatic repulsion contributed to the excellent performance. The packaged food could also be cooked with the prepared film for porridge; and the film slightly influenced the shear rheological properties of porridge and imposed little effect on the odors (Electronic-Nose) of porridge. Hence, the gelatin films modified by carboxymethyl starch could potentially work as the edible inner packaging or the edible quantitative packaging for food, offer convenience for consumers, reduce the packaging waste and avoid an extra burden on environment.