Application of bacteriophages in biopolymer-based functional food packaging films.

Recently, food spoilage caused by pathogens has been increasing. Therefore, applying control strategies is essential. Bacteriophages can potentially reduce this problem due to their host specificity, ability to inhibit bacterial growth, and extend the shelf life of food. When bacteriophages are applied directly to food, their antibacterial activity is lost. In this regard, bacteriophage-loaded biopolymers offer an excellent option to improve food safety by extending their shelf life. Applying bacteriophages in food preservation requires comprehensive and structured information on their isolation, culturing, storage, and encapsulation in biopolymers for active food packaging applications. This review focuses on using bacteriophages in food packaging and preservation. It discusses the methods for phage application on food, their use for polymer formulation and functionalization, and their effect in enhancing food matrix properties to obtain maximum antibacterial activity in food model systems.

The preparation, resources, applications, and future trends of nanofibers in active food packaging: a review.

Active packaging is a novel strategy for maintaining the shelf life of products and ensuring their safety, freshness, and integrity that has emerged with the consumer demand for safer, healthier, and higher quality food. Nanofibers have received a lot of attention for the application in active food packaging due to their high specific surface area, high porosity, and high loading capacity of active substances. Three common methods (electrospinning, solution blow spinning, and centrifugal spinning) for the preparation of nanofibers in active food packaging and their influencing parameters are presented, and advantages and disadvantages between these methods are compared. The main natural and synthetic polymeric substrate materials for the nanofiber preparation are discussed; and the application of nanofibers in active packaging is elaborated. The current limitations and future trends are also discussed. There have been many studies on the preparation of nanofibers using substrate materials from different sources for active food packaging. However, most of these studies are still in the laboratory research stage. Solving the issues of preparation efficiency and cost of nanofibers is the key to their application in commercial food packaging.

Electrospinning is the most used method to produce nanofibers for food packagingSolution blow and centrifugal spinning are novel for large-scale nanofiber productionA variety of natural and synthetic polymers have been used for nanofiber productionProgress has been made in the development of antimicrobial and antioxidant nanofibersEthylene removal and moisture removal nanofibers have been successfully produced.

Biodegradable and Flexible Nanoporous Films for Design and Fabrication of Active Food Packaging Systems.

Nanotechnology has facilitated the development of active food packaging systems with functions that could not be achieved by their traditional counterparts. Such smart and active systems can improve the shelf life of perishable products and overcome major bottlenecks associated with the fabrication of safe and environmentally friendly food packaging systems. Herein, we used a plasma-enabled surface modification strategy to fabricate biodegradable and flexible nanoporous polycaprolactone-based (FNP) films for food packaging systems. Their capacity for preserving tomatoes, tangerines, and bananas at room and refrigeration temperatures was tested by analyzing various fruit parameters (mold generation, appearance changes, freshness, weight loss, firmness, and total soluble solids contents). Compared with commonly used polyethylene terephthalate-based containers, the proposed system enhanced the fruit storage quality (i.e., retained appearance, reduced weight loss, better firmness, and sugar contents) by controlling moisture evaporation and inhibiting mold generation. Thus, the FNP film represents a new active food packaging strategy.

Development and Evaluation of the Properties of Active Films for High-Fat Fruit and Vegetable Packaging.

ß-cyclodextrin and allyl isothiocyanate inclusion complexes (ß-CD:AITC) have been proposed for developing fresh fruit and vegetable packaging materials. Therefore, the aim of this research was to develop active materials based on poly(lactic acid) (PLA) loaded with ß-CD:AITC and to assess changes in the material properties during the release of AITC to food simulants. PLA films with 0, 5 and 10 wt.% ß-CD:AITC were developed by extrusion. Surface properties were determined from contact angle measurements. Films were immersed in water, aqueous and fatty simulants to assess the absorption capacity and the change in the thermal properties. Moreover, the release of AITC in both simulants was evaluated by UV-spectroscopy and kinetic parameters were determined by data modeling. Results showed that a higher concentration of ß-CD:AITC increased the absorption of aqueous simulant of films, favoring the plasticization of PLA. However, the incorporation of ß-CD:AITC also avoided the swelling of PLA in fatty simulant. These effects and complex relationships between the polymer, inclusion complexes and food simulant explained the non-systematic behavior in the diffusion coefficient. However, the lower partition coefficient and higher percentage of released AITC to the fatty simulant suggested the potential of these materials for high-fat fruit and vegetable active packaging applications.

Development and application of fruit and vegetable based green films with natural bio-actives in meat and dairy products: a review.

In recent years, foodborne outbreaks and food plastic waste accumulation in the environment have impelled a hunt for new, sustainable, novel and innovatory food packaging interventions to face microbial contamination, food quality and safety. Pollution caused from wastes generated by agricultural activities is one of chief rising concerns of the environmentalists across the globe. A solution to this problem is effective and economic valorization of residues from agriculture sector. It would ensure that the by-products/residues from one activity act as ingredients/raw materials for another industry. An example is fruit and vegetable waste based green films for food packaging. Edible packaging is a well-researched area of science where numerous biomaterials have been already explored. Along with dynamic barrier properties, these biofilms often exhibit antioxidant and antimicrobial properties as function of the bioactive additives (e.g. essential oils) often incorporated in them. Additionally, these films are made competent by use of recent technologies (e.g. encapsulation, nano-emulsions, radio-sensors) to ensure high end performance and meet the principles of sustainability. Livestock products such as meat, poultry and dairy products are highly perishable and depend largely upon the mercy of packaging materials to enhance their shelf life. In this review, all the above-mentioned aspects are thoroughly covered with a view to project fruit and vegetable based green films (FVBGFs) as a potential and viable packaging material for livestock products, along with a discussion on role of bio-additives, technological interventions, properties and potential applications of FVBGFs in livestock products. © 2023 Society of Chemical Industry.

Incorporation of cinnamaldehyde, carvacrol, and eugenol into zein films for active food packaging: enhanced mechanical properties, antimicrobial activity, and controlled release.

Active packaging with antimicrobial functions to improve the quality and extend the shelf life of food products has gained great interest. Because commercial plastic packaging materials are not biodegradable and cause great environmental problems, plant-derived natural materials have been widely studied for the application of biodegradable packaging materials. Herein, we reported a study of essential oils (EOs)-loaded zein film. Cinnamaldehyde (CIN), carvacrol, and eugenol were added to equip the films with antimicrobial effects, while polyethylene glycol (PEG) and oleic acid (OA) were selected for the improvements of mechanical properties. The results showed that PEG efficiently improves the tensile strength and elongation (%E) of zein films compared to OA, although PEG induced weaker water barrier properties of the films than OA. FTIR spectra confirmed the formation of the hydrogen bonds between zein and PEG/OA. The EO-embedded zein film showed better antimicrobial effects than EO themselves. CIN-embedded films showed the highest antimicrobial effect among the three EOs. The sizes of the inhibition zones against Staphylococcus aureus of PEG-added zein films with 1%, 3%, and 5% CIN were 5.67, 12.67, and 16.67 mm, which were larger than that of pure CIN, with the sizes of 0.00, 3.00, and 4.67 mm, respectively. The developed films demonstrate a gradual release of EOs and show antimicrobial effects up to 96 h, indicating their high potential for the applications as active food packaging.

Novel graphene oxide/polymer composite membranes for the food industry: structures, mechanisms and recent applications.

The membrane can not only be used as food packaging, but also for the separation, fractionation and recovery of food ingredients. Graphene oxide (GO) sheets are a two-dimensional (2 D) material with a unique structure that exhibit excellent mechanical properties, biocompatibility, and flexibility. The corporation of polymer matrix membrane with GO can significantly improve the permeability, selectivity, and antibacterial activity. In this review, the chemical structures of GO, GO membranes and GO/polymer composite membranes are introduced, the permeation mechanisms of molecules through the membranes are discussed and key factors affecting the permeability are presented in detail. In addition, recent applications in the food industry for filtration, bioreactions and active food packaging are analyzed, and limitations and future trends of GO membranes development are also highlighted. GO/polymer composite membranes exhibit excellent permeability, selectivity and strong barrier properties against bacterial and gas permeation. However, current food material filtration and packaging applications of GO/polymer composite membranes are still in the laboratory stage. Future work can focus on the development of large scale uniformly sized GO production, the homogeneous distribution and tight combination of GO in polymer matrixes, the sensing function of GO in packaging, and the verification method of GO toxicology.

Selected Applications of Chitosan Composites.

Chitosan is one of the emerging materials for various applications. The most intensive studies have focused on its use as a biomaterial and for biomedical, cosmetic, and packaging systems. The research on biodegradable food packaging systems over conventional non-biodegradable packaging systems has gained much importance in the last decade. The deacetylation of chitin, a polysaccharide mainly obtained from crustaceans and shrimp shells, yields chitosan. The deacetylation process of chitin leads to the generation of primary amino groups. The functional activity of chitosan is generally owed to this amino group, which imparts inherent antioxidant and antimicrobial activity to the chitosan. Further, since chitosan is a naturally derived polymer, it is biodegradable and safe for human consumption. Food-focused researchers are exploiting the properties of chitosan to develop biodegradable food packaging systems. However, the properties of packaging systems using chitosan can be improved by adding different additives or blending chitosan with other polymers. In this review, we report on the different properties of chitosan that make it suitable for food packaging applications, various methods to develop chitosan-based packaging films, and finally, the applications of chitosan in developing multifunctional food packaging materials. Here we present a short overview of the chitosan-based nanocomposites, beginning with principal properties, selected preparation techniques, and finally, selected current research.

Progresses in Food Packaging, Food Quality, and Safety-Controlled-Release Antioxidant and/or Antimicrobial Packaging.

Food packaging is designed to protect foods, to provide required information about the food, and to make food handling convenient for distribution to consumers. Packaging has a crucial role in the process of food quality, safety, and shelf-life extension. Possible interactions between food and packaging are important in what is concerning food quality and safety. This review tries to offer a picture of the most important types of active packaging emphasizing the controlled/target release antimicrobial and/or antioxidant packaging including system design, different methods of polymer matrix modification, and processing. The testing methods for the appreciation of the performance of active food packaging, as well as mechanisms and kinetics implied in active compounds release, are summarized. During the last years, many fast advancements in packaging technology appeared, including intelligent or smart packaging (IOSP), (i.e., time-temperature indicators (TTIs), gas indicators, radiofrequency identification (RFID), and others). Legislation is also discussed.

Physicochemical Characterization of Packaging Foils Coated by Chitosan and Polyphenols Colloidal Formulations.

In this research, antimicrobial polysaccharide chitosan was used as a surface coating for packaging material. The aim of our research was to establish an additive formulation of chitosan and antioxidative plant extracts as dispersion of nanoparticles. Chitosan nanoparticles with embedded thyme, rosemary and cinnamon extracts were synthesized, and characterized for this purpose. Two representative, commercially used foils, polypropylene (PP) and polyethylene (PE), previously activated by UV/ozone to improve coating adhesion, were functionalized using chitosan-extracts nanoparticle dispersions. The foils were coated by two layers. A solution of macromolecular chitosan was applied onto foils as a first layer, followed by the deposition of various extracts embedded into chitosan nanoparticles that were attached as an upper layer. Since active packaging must assure bioactive efficiency at the interface with food, it is extremely important to understand the surface characteristics and phenomena of functionalized foils. The physico-chemical analyses of functionalized foils were thus comprised of surface elemental composition, surface charge, wettability, as well as surface morphology. It has been shown that coatings were applied successfully with an elemental composition, surface charge and morphology that should enable coating stability, homogeneity and consequently provide an active concept of the packaging surface in contact with food. Moreover, the wettability of foils was improved in order to minimize the anti-fogging behavior.

Physical-Chemical Evaluation of Active Food Packaging Material Based on Thermoplastic Starch Loaded with Grape cane Extract.

The aim of this paper is to evaluate the physicochemical and microbiological properties of active thermoplastic starch-based materials. The extract obtained from grape cane waste was used as a source of stilbene bioactive components to enhance the functional properties of thermoplastic starch (TPS). The biomaterials were prepared by the compression molding technique and subjected to mechanical, thermal, antioxidant, and microbiological tests. The results showed that the addition of grape cane extract up to 15 wt% (TPS/WE15) did not significantly influence the thermal stability of obtained biomaterials, whereas mechanical resistance decreased. On the other side, among all tested pathogens, thermoplastic starch based materials showed antifungal activity toward Botrytis cinerea and antimicrobial activity toward Staphylococcus aureus, suggesting potential application in food packaging as an active biomaterial layer.

Electrospinning of nanofibers: Potentials and perspectives for active food packaging.

Electrospun nanofibers with structural and functional advantages have drawn much attention due to their potential applications for active food packaging. The traditional role of food packaging is just storage containers for food products. The changes of retailing practice and consumer demand promote the development of active packaging to improve the safety, quality, and shelf life of the packaged foods. To develop the technique of electrospinning for active food packaging, electrospun nanofibers have been covalently or non-covalently functionalized for loading diverse bioactive compounds including antimicrobial agents, antioxidant agents, oxygen scavengers, carbon dioxide emitters, and ethylene scavengers. The aim of this review is to present a concise but comprehensive summary on the progress of electrospinning techniques for active food packaging. Emphasis is placed on the tunability of the electrospinning technique, which achieves the modification of fiber composition, orientation, and architecture. Efforts are also made to provide functionalized strategies of electrospun polymeric nanofibers for food packaging application. Furthermore, the existing limitations and prospects for developing electrospinning in food packaging area are discussed.

Preparation of antioxidant active films based on chitosan: diffusivity study of α-tocopherol into food simulants.

New active films based on chitosan and polycaprolactone blends and containing α-tocopherol were designed for food packaging applications. Mechanical properties, stability against temperature and swelling degree in 50 % ethanol (v/v) were evaluated. Migration kinetics of α-tocopherol from the developed films into butter and food simulants [50 % ethanol (v/v), 95 % ethanol (v/v), and isooctane] at different temperatures were studied. α-Tocopherol was quantified in the food simulants by means of high performance liquid chromatography with diode-array detection at 292 nm. The proposed method exhibited a good sensitivity with a limit of detection of 0.1 mg/L. The kinetics release of α-tocopherol was characterized by determining the partition and the diffusion coefficients by using a mathematical modeling based on Fick's Second Law. The diffusion coefficients obtained ranged between 1.03 × 10(-13) and 2.24 × 10(-12) cm(2)/s for 95 % ethanol (v/v) at 4 and 20 °C, respectively. Developed films maintained the antioxidant activity for more than 20 days.

Physio-mechanical properties of an active chitosan film incorporated with montmorillonite and natural antioxidants extracted from pomegranate rind.

An active film was prepared from chitosan incorporated with montmorillonite (MMT) and pomegranate rind powder extract (PRP). The effect of MMT (1 %, 3 %, and 5 % w/w chitosan) and PRP (1 %, 1.5 %, and 2 % w/v chitosan) on the physical, mechanical and antioxidant properties of the chitosan-based films was studied. Fourier transform infrared (FTIR) spectra revealed that good interactions occurred between functional groups of chitosan with MMT or with PRP. The results showed that the water vapor barrier property of the films was significantly improved by incorporation of MMT and PRP (p < 0.05). When compared to pure chitosan film, the WVP of M3P2 film (Chitosan/3 % MMT/2 % PRP) decreased by 25.2 %. Tensile strength of the films was affected by the addition of MMT and PRP. However, percent elongation at break was not significantly changed by addition of PRP. The film incorporated with 3 % MMT and 2 % PRP that contained the highest amount of total phenolic (15.2 mg GAE/g DW), was found to be the most active radical scavenger. These results suggest that chitosan films containing MMT and PRP can be used for development of active food packaging materials.

Shelf-life extension of refrigerated sea bass slices wrapped with fish protein isolate/fish skin gelatin-ZnO nanocomposite film incorporated with basil leaf essential oil.

Microbiological, chemical and sensory changes of sea bass slices wrapped with fish protein isolate (FPI)/fish skin gelatin (FSG) films incorporated with 3 % ZnO nanoparticles (ZnONP) (w/w, based on protein content) and 100 % basil leaf essential oil (BEO) (w/w, based on protein content) during storage of 12 days at 4 °C were investigated. Sea bass slices wrapped with FPI/FSG-ZnONP-BEO film had the lowest growth of psychrophilic bacteria, lactic acid bacteria and spoilage microorganisms including Pseudomonas , H2S-producing bacteria and Enterobacteriaceae throughout storage of 12 days in comparison with those wrapped with FPI/FSG-BEO, FPI/FSG-ZnONP, FPI/FSG film, polypropylene film (PP film) and the control (without wrapping), respectively (P < 0.05). Lowered increases in pH, total volatile base, peroxide value and TBARS value were found in FPI/FSG-ZnO-BEO film wrapped samples, compared with others (P < 0.05). Sensory evaluation revealed that shelf-life of sea bass slices was longest for samples wrapped with FPI/FSG-ZnONP-BEO film (12 days), as compared to the control (6 days) (P < 0.05).

Development of a multifunctional active food packaging membrane based on electrospun polyvinyl alcohol/chitosan for preservation of fruits.

To mitigate environmental impacts in food preservation, the development of a multifunctional membrane for packaging is of importance. In this study, we have successfully fabricated a nanofibrous membrane using an eco-friendly electrospinning technique, comprising polyvinyl alcohol (PVA), chitosan (CS), and tannic acid (TA). The resulting nanofibrous membranes were crosslinked with glutaraldehyde (GA) and surface modified with ZnO. Our findings demonstrate that the crosslinking process enhances water resistance, reduces water vapor permeability, improves tensile strength (from 3 to 18 MPa), and enhances thermal stability (increasing decomposition temperature from 225 °C to 310 °C). Furthermore, the incorporation of TA and ZnO provides antioxidant properties to the membrane, effectively preventing food decomposition caused by UV-induced oxidation. Additionally, CS, TA, and ZnO synergistically exhibit a remarkable antibacterial effect with a bacteriostasis rate exceeding 99.9 %. The strawberry fresh-keeping experiment further confirms that our developed membrane significantly extends shelf life by up to 6 days. Moreover, cytotoxicity assays confirm the non-toxic nature of these membranes. The innovative significance of this study lies in proposing a robust GA-PVA/CS/TA@ZnO nanofibrous membrane with excellent mechanical properties, biocompatibility, and multiple functionalities including antibacterial, anti-ultraviolet, and anti-oxidation capabilities. It has tremendous potential for applications in active food packaging materials.

Pickering emulsions of thyme oil in water using oxidized cellulose nanofibers: Towards bio-based active packaging.

The antioxidant and antimicrobial properties of thyme essential oil (TEO) are useful for active food packaging, but its poor aqueous solubility restricts its applications. This work involves anionic cellulose nanofibers (CNFs) as the sole stabilizing agent for TEO-in-water emulsions, with oil concentrations ranging from 10 mL/L to 300 mL/L. A double mechanism was proposed: the adsorption of CNFs at oil/water interfaces restricted coalescence to a limited extent, while thickening (rheological stabilization) was required to avoid the buoyance of large droplets (>10 µm). Thickening effects comprised both higher viscosity (over 0.1 Pa·s at 10 s-1) and yield stress (approximately 0.9 Pa). Dilute emulsions had good film-forming capabilities, whereas concentrated emulsions were suitable for paper coating. Regarding antimicrobial activity, CNF-stabilized TEO-in-water emulsions successfully inhibited the growth of both Gram-negative (E. coli, S. typhimurium) and Gram-positive bacteria (L. monocytogenes). As for the antioxidant properties, approximately 50 mg of paper or 3-5 mg of film per mL of food simulant D1 were required to attain 50 % inhibition in radical scavenging tests. Nonetheless, despite the stability and the active properties of these bio-based hydrocolloids, providing this antioxidant and antimicrobial activity was incompatible with maintaining the organoleptic properties of the foodstuff unaltered.

Application of electrospinning to fabricate phycocyanin- and Spirulina extract-loaded gliadin fibers for active food packaging.

This study explored the active food packaging application of phycocyanin- and Spirulina extract-loaded gliadin electrospun fibers (GPhy and GSPE5%). SEM findings confirmed that the morphology of fibers was tubular, showing the GPhy and GSPE5% as the optimum fibers. The loading efficiencies of GPhy and GSPE5% were also around 90%, which proved the well-incorporated compounds within the fibers. Simulation results of α-gliadin dissolved in acetic acid illustrated the denaturation of the protein. FTIR and TGA confirmed that after electrospinning the chemical/structural changes and enhanced thermostabilities occurred, respectively. Antibacterial and antioxidant tests detected higher bactericidal and antioxidative effects of GSPE5% than GPhy. In the application part, it was found that GPhy and GSPE5% were able to decrease PV and TBA values as the indications of walnut kernels' protection from lipid oxidation. This work shows a facile and an efficient way to fabricate active food packaging materials using electrospinning and natural compounds.

Preparation and characterization of chitosan/dialdehyde carboxymethyl cellulose composite film loaded with cinnamaldehyde@zein nanoparticles for active food packaging.

In this study, zein-loaded cinnamaldehyde (Cin@ZN) nanoparticles were incorporated into Chitosan (CS)/dialdehyde carboxymethyl cellulose (DCMC) matrix to fabricate the active food packaging materials possessing outstanding antioxidant and antibacterial properties. The research investigated how varying levels of Cin@ZN nanoparticles affected the morphology, microstructure, physicochemical properties of CS/DCMC composite films. The inclusion of Cin@ZN could significantly improve the mechanical strength, reduce the water vapor and oxygen permeability of CS/DCMC composite films and endow films with UV-light blocking properties. It's worth noting that the antibacterial and antioxidant capacities of CS/DCMC films had an astonishing enhancement with Cin@ZN blending, in which ABTS scavenging ratio of the composite films (100 mg) with different Cin@ZN contents reached >90 %. Furthermore, CS/DCMC/Cin@ZN 35 % composite film has the ability to efficiently protect strawberries from microbial damage and decelerate the spoilage rate of strawberries under ambient condition. Consequently, the CS/DCMC/Cin@ZN composite film can be applied as packaging material to extend the lifespan of fruits.

Current progress in functionalization of cellulose nanofibers (CNFs) for active food packaging.

There is a growing interest in utilizing renewable biomass resources to manufacture environmentally friendly active food packaging, against the petroleum-based polymers. Cellulose nanofibers (CNFs) have received significant attention recently due to their sustainability, biodegradability, and widely available sources. CNFs are generally obtained through chemical or physical treatment, wherein the original surface chemistry and interfacial interactions can be changed if the functionalization process is applied. This review focuses on promising and sustainable methods of functionalization to broaden the potential uses of CNFs in active food packaging. Novel aspects, including functionalization before, during and after cellulose isolation, and functionalization during and after material processing are addressed. The CNF-involved structural construction including films, membranes, hydrogels, aerogels, foams, and microcapsules, is illustrated, which enables to explore the correlations between structure and performance in active food packaging. Additionally, the enhancement of CNFs on multiple properties of active food packaging are discussed, in which the interaction between active packaging systems and encapsulated food or the internal environment are highlighted. This review emphasizes novel approaches and emerging trends that have the potential to revolutionize the field, paving the way for advancements in the properties and applications of CNF-involved active food packaging.