Questionnaire survey on hands-on simulation training using a dental humanoid robot (SIMROID®).

INTRODUCTION: A dental humanoid robot, SIMROID®, is able to replicate the actions characteristic of human beings and enable training for communicating with patients and coping with unexpected situations. This study assessed user experiences via a survey questionnaire following hands-on training on the SIMROID®. MATERIALS AND METHODS: A total of 112 participants, consisting of 50 high school students who visited AUSD (Asahi University School of Dentistry) to participate in open campus events, 42 fourth-year students at AUSD and 20 dental students from Mexico State Autonomy University, University of Siena and Peking University took the survey. The participants observed the movements and reactions of a SIMROID® robot placed on a dental unit for approximately 20 min after which they completed a questionnaire survey. Both Japanese and English versions of the questionnaire were prepared for local and visiting foreign dental students. The questionnaire comprised 8 items, with a further two items for those undertaking dental training and an open comment field. RESULTS: All participants who observed the SIMROID® completed the questionnaire giving a 100% response rate. Generally, simulation training with SIMROID® was highly appreciated by all participants. The comprehensive evaluation score for SIMROID® was 4.56 ± 0.50 points for high school students, 4.05 ± 0.82 points for students at AUSD and 4.70 ± 0.47 points for foreign dental students, showing all participants had a very positive experience and impression of the SIMROID®. CONCLUSIONS: Therefore, simulation training using SIMROID® seems beneficial learning tool.

A conceptual model for clinical psychomotor skill development in an era of simulated and virtual reality.

Psychomotor skill development is central to a beginner practitioner's learning pathway. Curriculum constraints around time, access to facilities and resources in health professions education have prompted the growth in alternative approaches to clinical skill development in both simulation and direct patient care. Among these is the increased incorporation of virtual reality (VR) systems with haptic feedback alongside traditional, solid simulations. Given the rapid growth in the adoption of technological affordances to support skill development, it is cogent to pause and examine whether the underpinning concepts regarding psychomotor skill development that have driven much of the approaches to teach clinical skill acquisition in dentistry remain fit-for-purpose. This conceptual paper proposes a new taxonomy for clinical simulation psychomotor skill development in the era of increasing variety of simulation modalities.

The prevalence of non-carious cervical lesions (NCCLs) with or without erosive etiological factors among adults of different ages in Tokyo.

OBJECTIVES: To evaluate the prevalence of non-carious cervical lesions (NCCLs) on teeth with or without erosive etiological factors across a broad range of ages of Japanese adults. MATERIALS AND METHODS: The study sample consisted of a total of 1108 subjects aged 15 to 89 years in Tokyo, Japan. Two examiners evaluated NCCLs and dental erosion (DE) during a full-mouth examination. Subjects were asked to complete a self-administered daily diet, habits, and health condition questionnaire. Subjects who had frequent acid consumption or gastric reflux and at least one tooth with initial enamel wear were placed in the erosion present (EP) group, and the remainder of subjects were placed in the erosion not present (EN) group. Logistic regression analyses were carried out to identify etiological factors of NCCLs associated with DE. RESULTS: Overall prevalence of NCCLs was 60.2%; the prevalence increased with age. There were no statistical differences in the prevalence of NCCLs between the EP and EN groups, except for the 60-69 years group. Multiple logistic regression analysis showed the frequency of consumption of carbonated soft drinks, citrus juice, and acidic fruits such as oranges; tooth brushing pressure; and bruxism were associated with the presence of NCCLs. CONCLUSION: There were no statistical differences in the prevalence of NCCLs with or without erosive etiological factors except for the 60-69 years group. CLINICAL RELEVANCE: NCCL distribution increased with age, and erosive risk factors caused by change in dietary habits might affect the incidence of NCCLs for elders. TRIAL REGISTRATION: UMIN000041982.

Effects of a surface prereacted glass-ionomer filler coating material on biofilm formation and inhibition of dentin demineralization.

OBJECTIVES: This study investigated the ability of a surface prereacted glass-ionomer (S-PRG) coating material to inhibit the biofilm formation and demineralization of dentin. METHODS AND MATERIALS: Dentin specimens were randomly divided into three groups: (1) no coating (control), (2) S-PRG filler-containing coat, and (3) a nonS-PRG filler-containing coat. Streptococcus mutans biofilms were grown on the dentin surfaces in a microcosm for 20 h. Then, the quantity of bacteria and water-insoluble glucan in the retained biofilm on the dentin surface were measured. Regarding demineralization inhibition test, specimens were demineralized for 5 days then sectioned into halves and observed under confocal laser scanning microscope (CLSM). One-way ANOVA and Tukey's HSD were used for statistical analysis. RESULTS: The estimated mean surface roughness for specimens in the S-PRG group was statistically significantly higher than the estimates for both the nonS-PRG and the control group specimens. The quantity of bacteria and water-insoluble glucan/mm2 revealed that the S-PRG group prevented biofilm formation and bacterial adhesion to the dentin surface compared with the control and nonS-PRG groups. The S-PRG group recorded the highest acid-resistance ability with no surface loss. CONCLUSION: Application of S-PRG barrier coat on dentin surfaces can inhibit biofilm formation as well as protecting the dentin surface against demineralization. CLINICAL SIGNIFICANCE: Coating material containing S-PRG fillers might be used for caries prevention, through inhibiting biofilm formation, enhancing mineralization, and reducing acidic attack by cariogenic bacteria.

When to intervene in the caries process? An expert Delphi consensus statement.

OBJECTIVES: To define an expert Delphi consensus on when to intervene in the caries process and on existing carious lesions using non- or micro-invasive, invasive/restorative or mixed interventions. METHODS: Non-systematic literature synthesis, expert Delphi consensus process and expert panel conference. RESULTS: Carious lesion activity, cavitation and cleansability determine intervention thresholds. Inactive lesions do not require treatment (in some cases, restorations will be placed for reasons of form, function and aesthetics); active lesions do. Non-cavitated carious lesions should be managed non- or micro-invasively, as should most cavitated carious lesions which are cleansable. Cavitated lesions which are not cleansable usually require invasive/restorative management, to restore form, function and aesthetics. In specific circumstances, mixed interventions may be applicable. On occlusal surfaces, cavitated lesions confined to enamel and non-cavitated lesions radiographically extending deep into dentine (middle or inner dentine third, D2/3) may be exceptions to that rule. On proximal surfaces, cavitation is hard to assess visually or by using tactile methods. Hence, radiographic lesion depth is used to determine the likelihood of cavitation. Most lesions radiographically extending into the middle or inner third of the dentine (D2/3) can be assumed to be cavitated, while those restricted to the enamel (E1/2) are not cavitated. For lesions radiographically extending into the outer third of the dentine (D1), cavitation is unlikely, and these lesions should be managed as if they were non-cavitated unless otherwise indicated. Individual decisions should consider factors modifying these thresholds. CONCLUSIONS: Comprehensive diagnostics are the basis for systematic decision-making on when to intervene in the caries process and on existing carious lesions. CLINICAL RELEVANCE: Carious lesion activity, cavitation and cleansability determine intervention thresholds. Invasive treatments should be applied restrictively and with these factors in mind.

Effects of Selective Phosphoric Acid Etching on Enamel Using "No-wait" Self-etching Adhesives.

PURPOSE: To evaluate the effect of selective phosphoric acid etching on enamel using "no-wait" self-etching adhesives. MATERIALS AND METHODS: Clearfil Universal Bond Quick (UBQ, Kuraray Noritake) or G-Premio BOND (GPB, GC) was applied to ground human enamel surfaces. The adhesives were used in 3 modes: no-waiting self-etching mode (UBQ-0 or GPB-0), 10-s self-etching mode (UBQ-10 or GPB-10), and the selective-etch mode with phosphoric acid etching (UBQ-PA or GPB-PA). After an acid-base challenge, the morphological attributes of the interface were examined using scanning electron microscopy (SEM) to characterize the acid-base resistant zone (ABRZ). Microshear bond strength (µSBS) testing to enamel and ultimate tensile strength (UTS) of the adhesive resin were carried out. RESULTS: ABRZ formation was confirmed in all groups. UBQ-PA and GPB-PA created thicker ABRZ with no funnel-shaped erosion beneath the adhesive-enamel interface. µSBS of UBQ-PA was significantly higher than UBQ-0 and UBQ-10 (p < 0.05). However, there were no statistically signficant differences in µSBS among GPB-0, GPB-10, and GPB-PA. For the UTS, UBQ was significantly higher than GPB. CONCLUSION: Selective phosphoric acid etching created a stable adhesive-enamel interface. The no-waiting self-etching concept adhesive led to a thinner ABRZ. The results of µSBS suggest that phosphoric acid etching effects on enamel are material dependent.

Evaluation of MDP and NaF in Two-step Self-etch Adhesives on Enamel Microshear Bond Strength and Morphology of the Adhesive-Enamel Interface.

PURPOSE: To evaluate the roles of MDP and NaF in the bonding resin of a two-step self-etch adhesive (2-SEA) on enamel bonding performance. MATERIALS AND METHODS: The experimental 2-SEAs were composed of an MDP-containing self-etching primer and four different bonding resins which were MDP- and NaF-free (00), MDP-containing and NaF-free (M0), MDP-free and NaF-containing (0F), and MDP- and NaF-containing (MF) adhesives. Microshear bond strength (µSBS) to enamel and ultimate tensile strength (UTS) of the adhesive resin were determined. The morphological characteristics of the adhesive-enamel interface after acid-base challenge were observed using SEM to evaluate the acid-base resistant zone (ABRZ). RESULTS: No decrease in µSBS was observed even after thermocycling (TC) in 00, 0F and MF. However, the µSBS of M0 significantly decreased after TC. The UTS of M0 significantly decreased after 1- and 180-day storage in water. SEM observations indicated that ABRZ was present in all groups. However, formation of erosion beneath the ABRZ was observed in M0 and 00, whereas formation of a slope without erosion was observed at the bottom of the ABRZ in MF. CONCLUSION: In the experimental 2-SEAs, the addition of MDP alone to the adhesive resin did not contribute to an improvement in enamel bonding durability and interfacial morphology, whereas the addition of NaF in the adhesive resin demonstrated an enhancement of the bonding durability and improvement of acid resistance at the bonded interface.

Effect of Glutathione Bio-Molecule on Tooth Discoloration Associated with Silver Diammine Fluoride.

This study evaluated the effect of Glutathione (GSH) bio-molecule on the reduction of enamel and dentin discoloration after application of 38% silver diammine fluoride solution (SDF). One hundred and twenty bovine teeth specimens were used. The enamel and dentin specimens were divided into three groups: (1) SDF only (control); (2) SDF followed by application of a potassium iodide solution (KI); and (3) SDF mixed with 20% GSH. Half the specimens were exposed to light and the remainder kept in dark conditions (n = 10) Color changes were measured using a spectrophotometer at the following time intervals: before solution application (baseline) and immediately after application, then 3, 6, 24, 48, 72 h, and 7, 10 and 14 days. SEM/EDS analysis was performed on treated enamel and dentin. Statistical analysis was done using a repeated measures ANOVA test. The spectrophotometer results showed that the SDF group exhibited the greatest color changes under both light exposed and dark conditions, while SDF + GSH group was effective in decreasing the color changes in both light and dark conditions. The SDF + KI group showed an insignificant color changes over time. SEM/EDS analysis showed different patterns for the silver crystal formation in each group (SDF, SDF + GSH, and SDF + KI group). It was concluded GSH can effectively minimize color changes after application of SDF, especially on enamel and to a lesser extent on dentin.

Getting to the Root of Fine Motor Skill Performance in Dentistry: Brain Activity During Dental Tasks in a Virtual Reality Haptic Simulation.

BACKGROUND: There is little evidence considering the relationship between movement-specific reinvestment (a dimension of personality which refers to the propensity for individuals to consciously monitor and control their movements) and working memory during motor skill performance. Functional near-infrared spectroscopy (fNIRS) measuring oxyhemoglobin demands in the frontal cortex during performance of virtual reality (VR) psychomotor tasks can be used to examine this research gap. OBJECTIVE: The aim of this study was to determine the potential relationship between the propensity to reinvest and blood flow to the dorsolateral prefrontal cortices of the brain. A secondary aim was to determine the propensity to reinvest and performance during 2 dental tasks carried out using haptic VR simulators. METHODS: We used fNIRS to assess oxygen demands in 24 undergraduate dental students during 2 dental tasks (clinical, nonclinical) on a VR haptic simulator. We used the Movement-Specific Reinvestment Scale questionnaire to assess the students' propensity to reinvest. RESULTS: Students with a high propensity for movement-specific reinvestment displayed significantly greater oxyhemoglobin demands in an area associated with working memory during the nonclinical task (Spearman correlation, rs=.49, P=.03). CONCLUSIONS: This small-scale study suggests that neurophysiological differences are evident between high and low reinvesters during a dental VR task in terms of oxyhemoglobin demands in an area associated with working memory.

Effect of Silver Diamine Fluoride and Potassium Iodide Treatment on Secondary Caries Prevention and Tooth Discolouration in Cervical Glass Ionomer Cement Restoration.

This study investigated the effect of silver diamine fluoride (SDF) and potassium iodide (KI) treatment on secondary caries prevention and tooth discolouration in glass ionomer cement (GIC) restoration. Cervical GIC restorations were done on 30 premolars with: Group 1, SDF + KI; Group 2, SDF (positive control); Group 3, no treatment (negative control). After cariogenic biofilm challenge, the demineralisation of dentine adjacent to the restoration was evaluated using micro-computed tomography (micro-CT) and Fourier transform infrared (FTIR) spectroscopy. The colour of dentine adjacent to the restoration was assessed using CIELAB system at different time points. Total colour change (∆E) was calculated and was visible if ∆E > 3.7. Micro-CT showed the outer lesion depths for Groups 1, 2 and 3 were 91 ± 7 µm, 80 ± 7 µm and 119 ± 8 µm, respectively (p < 0.001; Group 2 < Group 1 < Group 3). FTIR found that there was a significant difference in amide I-to-hydrogen phosphate ratio among the three groups (p < 0.001; Group 2 < Group 1 < Group 3). ∆E of Groups 1, 2 and 3 after biofilm challenge were 22.5 ± 4.9, 70.2 ± 8.3 and 2.9 ± 0.9, respectively (p < 0.001; Group 3 < Group 1 < Group 2). SDF + KI treatment reduced secondary caries formation on GIC restoration, but it was not as effective as SDF treatment alone. Moreover, a perceptible staining on the restoration margin was observed, but the intensity of discolouration was less than that with solely SDF treatment.

A new method of evaluation of fracture patterns following microtensile bond strength testing using polarized light microscopy.

PURPOSE: This work describes a new method using polarized light microscopy to determine the failure modes of fractured beams following microtensile bond strength testing. The outcomes were validated using SEM and EDX elemental analysis. MATERIALS AND METHODS: Resin adhesives and resin composites bonded to caries-free dentin samples as well as disks of adhesive and composite were observed with reflected polarized light microscopy (PLM) to obtain standard images. A set of beams fractured in the microtensile bond test were observed with PLM and compared with the standard images to determine failure mode through PLM color matching with the standard dentin, adhesive, or composite images. Samples were analyzed by EDX under SEM and compared with the PLM outcomes. RESULTS: Reflected PLM images showed that the fractured surfaces covered with resin-based materials (adhesives or composite) appeared pink in color, in contrast to dentin surfaces, which appeared yellow. EDX mapping together with SEM observation confirmed the results obtained by PLM. CONCLUSION: The results of EDX mapping and SEM observation showed that the use of polarized light microscopy is a simple, viable method for differentiation between the resin-covered dentin surfaces for determining fracture pattern analysis after bond testing.

A comparison of the shear bond strength and failure mode to metals of unsupported and supported luting cement specimens.

PURPOSE: To compare the mean shear bond strength (SBS) and failure mode of a resin-modified glass-ionomer luting cement (RM-GIC) to five different metals using unsupported and supported cement specimens with different placement of the shear load. MATERIALS AND METHODS: A RM-GIC was bonded to five metals using "unsupported" and "supported" techniques at a SBS-specimen diameter of 2.36 mm. The bond was stressed to failure using shear knife and wire loop debonding protocols. For the shear knife method, the distance of the shear force from the interface was 0 mm or 0.3 mm. Failure analysis was assessed by stereomicroscope and SEM. RESULTS: Two-way ANOVA and post-hoc Tukey's test revealed a significant difference between the unsupported and supported mean SBS. The SBS of supported specimens, where the shear force was applied to the mold that enclosed the specimens, were in most cases statistically significantly higher (p < 0.05) than specimens that were not supported. The mean bond strengths of RM-GIC ranged from 4.5 ± 2.3 MPa to 27.4 ± 3.7 MPa. Analysis of the failure mode showed significant differences (p < 0.001) for the test methods except for adhesion to gold-based metal. The adhesive failure mode was between 91% and 97% for supported specimens and between 47% and 63% for unsupported specimens. CONCLUSION: Within the limits of this study, supported specimens exhibited higher mean SBS than unsupported specimens. The method of debonding had a significant effect on the mean SBS for RM-GIC bonded to metal. Mold-supported specimens had a higher incidence of adhesive failure than unsupported cement specimens.

Bioactivity of human dental pulp-derived stem cells with boron-controlled S-PRG filler eluate by anion exchange.

Surface pre-reacted glass-ionomer (S-PRG) filler is a bioactive glass filler capable of releasing various ions. A culture medium to which was added an S-PRG filler eluate rich in boron was reported to enhance alkaline phosphatase (ALP) activity in human dental pulp-derived stem cells (hDPSC). To clarify the role of boron eluted from S-PRG fillers, the modified S-PRG filler eluate with different boron concentrations was prepared by using an anion exchange material. Therefore, elemental mapping analysis of anion exchange material, adsorption ratio, hDPSCs proliferation and ALP activity were evaluated. For statistical analysis, Kruskal-Wallis test was used, with statistical significance determined at p<0.05. ALP activity enhancement was not observed in hDPSC cultured in the medium that contained the S-PRG filler eluate from which boron had been removed. The result suggested the possibility that an S-PRG filler eluate with controlled boron release could be useful for the development of novel dental materials.

Dentin Bonding Durability of Four Different Recently Introduced Self-Etch Adhesives.

The objectives of this study were to evaluate the bonding durability of four different self-etch adhesives to dentin after 24 h and thermal cycling (TC) and to measure the degree of polymerization conversion (DC) in situ. Two-step self-etch adhesives, Clearfil SE Bond 2 (SE2, Kuraray Noritake Dental) and G2-Bond Universal (G2B, GC), and one-step self-etch adhesives, Scotchbond™ Universal Plus Adhesive (SBU, 3M ESPE) and Clearfil Universal Bond Quick (UBQ, Kuraray Noritake Dental), were used. The labial surfaces of bovine teeth were ground to create flat dentin surfaces. The adhesives were applied according to the manufacturers' instructions. After resin composite buildup and 24 h water storage, the specimens were sectioned into beams and all groups were subjected to thermal stress for 0, 10,000 (10k), or 20,000 (20k) cycles followed by micro-tensile bond strength (µTBS) testing. In situ DC was investigated with a laser Raman microscope. The µTBS data were statistically analyzed and subjected to a Weibull analysis. The different groups were compared at the characteristic strength (63.2% probability of failure) (α = 0.05). Two-Way ANOVA was used to show the effect of different adhesives and thermal cycling on the mean DC% followed by Tukey's multiple comparison post hoc test. G2B/TC10k resulted in a significant increase in the µTBS compared to TC0. SBU/TC20k showed significantly higher µTBS compared to TC0. For comparison between different tested adhesives, SBU showed a significantly lower µTBS compared to G2B after TC10k. G2B and SBU showed a greater number of adhesive failures after TC. Mean DC% was different for each adhesive. The newly developed MDP- and HEMA-free 2-SEA showed similar bonding performance with the gold-standard 2-SEA. However, there is still room for further improvement in terms of SEAs.

Design of Multi-Functional Bio-Safe Dental Resin Composites with Mineralization and Anti-Biofilm Properties.

This study aims to develop multi-functional bio-safe dental resin composites with capabilities for mineralization, high in vitro biocompatibility, and anti-biofilm properties. To address this issue, experimental resin composites consisting of UDMA/TEGDMA-based dental resins and low quantities (1.9, 3.8, and 7.7 vol%) of 45S5 bioactive glass (BAG) particles were developed. To evaluate cellular responses of resin composites, MC3T3-E1 cells were (1) exposed to the original composites extracts, (2) cultured directly on the freshly cured resin composites, or (3) cultured on preconditioned composites that have been soaked in deionized water (DI water), a cell culture medium (MEM), or a simple HEPES-containing artificial remineralization promotion (SHARP) solution for 14 days. Cell adhesion, cell viability, and cell differentiation were, respectively, assessed. In addition, the anti-biofilm properties of BAG-loaded resin composites regarding bacterial viability, biofilm thickness, and biofilm morphology, were assessed for the first time. In vitro biological results demonstrated that cell metabolic activity and ALP expression were significantly diminished when subjected to composite extracts or direct contact with the resin composites containing BAG fillers. However, after the preconditioning treatments in MEM and SHARP solutions, the biomimetic calcium phosphate minerals on 7.7 vol% BAG-loaded composites revealed unimpaired or even better cellular processes, including cell adhesion, cell proliferation, and early cell differentiation. Furthermore, resin composites with 1.9, 3.8, and 7.7 vol% BAG could not only reduce cell viability in S. mutans biofilm on the composite surface but also reduce the biofilm thickness and bacterial aggregations. This phenomenon was more evident in BAG7.7 due to the high ionic osmotic pressure and alkaline microenvironment caused by BAG dissolution. This study concludes that multi-functional bio-safe resin composites with mineralization and anti-biofilm properties can be achieved by adding low quantities of BAG into the resin system, which offers promising abilities to mineralize as well as prevent caries without sacrificing biological activity.

Bacterial adhesion and antibacterial property of coating materials containing theobromine and S-PRG filler.

Theobromine (TB) has been reported to promote tooth remineralization, strengthen tooth substance, and relieve dentin hypersensitivity. This study aimed to evaluate experimental tooth coating materials containing TB and surface pre-reacted glass-ionomer (S-PRG) fillers by examining the effects on bacterial adhesion and antibacterial properties. In addition, the amount of TB eluted from the coating material was measured. There was no significant difference in bacterial adhesion depending on the presence or absence of TB in the coating material, however, a significant decrease in the amount of bacterial adhesion was observed when S-PRG fillers were added to the coating material. The amount of eluted TB did not differ depending on the type of the filler in the coating material. It was suggested that TB could be used to develop a new dental material with the potential ability to inhibit the initiation and progression of dental caries.

Comparison of two all-in-one adhesives bonded to non-carious cervical lesions--results at 3 years.

The aim of this study was to evaluate the clinical performance of S(3) Bond (Kuraray Corp., Japan) and G-Bond (GC Corp., Japan) all-in-one bonding agents, over 3 years in non-carious cervical lesions (NCCLs). Ethics Committee approval was obtained, and 60 restorations were placed in 11 patients aged 45-84 years (mean 60.5 years), using either Clearfil ST resin composite (Kuraray) and S(3) Bond or Gradia resin composite (GC) and G-Bond alternately, without phosphoric acid etch on the uncut enamel margins. Patients were recalled at 6 months, 1 year, 2 years and 3 years, and photographs were taken for assessment of colour match and marginal discoloration. One patient was not available at 3 years, resulting in 54 restorations being available for evaluation. One restoration of S(3)/Clearfil ST was lost at 2 years, giving retention rates of 97% for S(3) and 100% for G-Bond. At 3 years, six restorations for S(3)/Clearfil ST showed slight marginal discoloration and one restoration pronounced marginal staining. For G-Bond/Gradia at 3 years, 11 restorations exhibited slight marginal staining and one restoration pronounced marginal staining. Most restorations were bonded to sclerotic dentin. Statistical analysis of marginal staining showed no significant difference between the two restoration groups. The degree of marginal staining was almost identical for both materials and tended to be in larger restorations. Both S(3) and G-Bond all-in-one bonding systems appear to be good adhesives for the restoration of NCCL for the length of the current study. Restoration of NCCLs with the newer all-in-one adhesives appears to be a viable alternative technique to more complicated adhesive materials.

Nonrestorative Caries Treatment: A Systematic Review Update.

Caries is the most prevalent chronic noncommunicable disease. Strategies to prevent its onset and early interventions to arrest the progression of early lesions have been emphasised throughout recent decades to avoid or delay the restorative spiral of the tooth. More individuals are retaining their natural teeth into old age, thereby necessitating ongoing restorative dentistry intervention for their maintenance. The aim of this systematic review was to update the state of the art regarding clinical studies reporting the effectiveness of different nonrestorative caries treatment options in the 5-year period from 2017 to 2022. Relevant articles were retrieved from 2 electronic databases, including randomised clinical trials (RCTs) published from January 2017 until April 2022, assessing effectiveness and secondary effects of at least one nonrestorative caries treatment option, carried out with adults and/or children with noncavitated or cavitated carious lesions on either primary or permanent teeth and diagnosed by radiographs or visual/tactile assessment. All 35 included articles presented the results of RCTs with a follow-up period ranging from 6 to 84 months. Most of these studies were considered high-quality articles with a low risk of bias. Sealants and fluoride gels and varnishes were mentioned in 12 studies as effective strategies to prevent the onset of caries lesions and to arrest them in the early stages. Resin infiltration reported high caries arresting rates in noncavitated proximal lesions in 10 publications. Silver diammine fluoride presented high caries-arresting rates in open dentin lesions, both in primary and permanent dentitions as well as in root caries lesions that were accessible for cleansing. New evidence has been published between 2017 and 2022 as the result of numerous clinical studies providing further evidence of the effectiveness of nonrestorative caries treatment options.

Clinical assessment of resin-coating technique applied to exposed dentin after crown preparation.

The resin-coating technique, in which exposed dentin surfaces are covered using a thin-film coating material, was approved in the Japanese public health insurance system in December 2019. The purpose of this study was to evaluate clinical cases treated using the resin-coating technique with Hybrid Coat II (HC II) after tooth preparation on vital teeth. A total of 134 cases from patients who visited nine dental clinics were examined from the clinical records. Clinical signs and symptoms of cases before, during, and after treatment and at the time of recall were evaluated. The resin-coating was applied as either a single application with HC II (86.6%) or a combined application of HC II and a flowable resin composite (13.4%). The success rate without any symptoms of sensivity to cold water was 92.5% (124 cases). The current results indicated that the resin-coating with HC II is a reliable treatment for the tooth preparation of vital teeth.

Color changes and shear bond strength to simulated caries lesions treated with a novel solution of 20% silver nanoclusters in polymethacrylic acid.

The aims of the study were: (1) To compare the staining effect on demineralized dentin simulating caries between silver nanoclusters (AgNCls) synthesized using polymethacrylic acid (PMAA) and silver diammine fluoride (SDF), and (2) to measure the shear bond strength (SBS) of a glass ionomer cement (GIC) to simulated caries lesions with and without the application of AgNCls/PMAA or SDF. Dentine blocks 4 mm thick from twenty-four non-carious third molars were sectioned and coated with nail varnish (Revlon, New York, USA). Simulated caries lesions on occlusal dentin surfaces were created (66 h in 0.05 M acetate buffer 2.2 mM calcium/phosphate pH 5.0). Specimens were divided into groups and treated with (n = 8): (A) 20% AgNCls/PMAA; (B) SDF 38% (Fagamin, Tedequim, Córdoba, Argentina); or (C) without treatment. AgNCls/PMAA or SDF were applied on the exposed surfaces with a microbrush for 10 s. Samples were incubated for 24 h at 37 °C at 100% relative humidity. Surface color was measured according to the CIE-L*a*b* system before and after demineralization (R0 and R1), 24 h and one week after treatment (R2 and R3), using a spectrophotometer (CM-600D Konica Minolta Sesing Inc., Japan). Groups A and B received an extra application of AgNCls/PMAA or SDF before a conventional GIC (Fuji IX-Gold Label, GC Corp, Tokyo, Japan) was bonded using a mold, 4 mm diameter × 3 mm high. For SBS, a Universal Testing Machine (Digimess RS-8000-5, China)-crosshead speed of 1 mm/min-was used. Statistical analysis was performed using ANOVA, Student-t and Scheffe-test at a significance of p < 0.05. Group A presented a stable color p = 0.24 between R1-R2 and R1-R3 in contrast to significant color changes in Group B (p = 0.02). SBS was higher (p < 0.01) in Group A (10.4 ± 2.7 MPa) compared to Groups B (3.3 ± 1.3 MPa) and C (4.0 ± 0.4 MPa), where no differences between the latter groups were observed (p = 0.77). Results of this preliminary study demonstrated that 20% AgNCls/PMAA did not stain simulated carious dentin and improved SBS of the GIC. The relevance of this study relies on the development of a therapeutic system to potentially arrest caries lesions without staining.