Detonation synthesis of carbon nano-onions via liquid carbon condensation.

Transit through the carbon liquid phase has significant consequences for the subsequent formation of solid nanocarbon detonation products. We report dynamic measurements of liquid carbon condensation and solidification into nano-onions over ∽200 ns by analysis of time-resolved, small-angle X-ray scattering data acquired during detonation of a hydrogen-free explosive, DNTF (3,4-bis(3-nitrofurazan-4-yl)furoxan). Further, thermochemical modeling predicts a direct liquid to solid graphite phase transition for DNTF products ~200 ns post-detonation. Solid detonation products were collected and characterized by high-resolution electron microscopy to confirm the abundance of carbon nano-onions with an average diameter of ∽10 nm, matching the dynamic measurements. We analyze other carbon-rich explosives by similar methods to systematically explore different regions of the carbon phase diagram traversed during detonation. Our results suggest a potential pathway to the efficient production of carbon nano-onions, while offering insight into the phase transformation kinetics of liquid carbon under extreme pressures and temperatures.

Dynamic Behavior of Engineered Lattice Materials.

Additive manufacturing (AM) is enabling the fabrication of materials with engineered lattice structures at the micron scale. These mesoscopic structures fall between the length scale associated with the organization of atoms and the scale at which macroscopic structures are constructed. Dynamic compression experiments were performed to study the emergence of behavior owing to the lattice periodicity in AM materials on length scales that approach a single unit cell. For the lattice structures, both bend and stretch dominated, elastic deflection of the structure was observed ahead of the compaction of the lattice, while no elastic deformation was observed to precede the compaction in a stochastic, random structure. The material showed lattice characteristics in the elastic response of the material, while the compaction was consistent with a model for compression of porous media. The experimental observations made on arrays of 4 × 4 × 6 lattice unit cells show excellent agreement with elastic wave velocity calculations for an infinite periodic lattice, as determined by Bloch wave analysis, and finite element simulations.

The acceptability of behavioral treatments for marital problems. A comparison of behavioral exchange and communication skills training procedures.

Married female undergraduates were asked to provide ratings of the acceptability of two treatment components commonly used within the framework of behavioral marital therapy. The study compared subjects' evaluations of detailed taped descriptions of behavioral exchange/contracting procedures and communication/problem-solving skills training as they were applied to two hypothetical clinical marital cases. The study also evaluated the extent to which the severity of the marital problems influenced treatment acceptability evaluation. Communication/problem-solving skills training was judged as more acceptable than behavioral exchange/contracting procedures and received a higher score on the Evaluative and Potency dimensions of the Semantic Differential. Judgments of treatment Potency were also found to be influenced by idiosyncratic features of the cases described in association with problem severity. Implications and directions for future research are briefly discussed.

Impact system for ultrafast synchrotron experiments.

The impact system for ultrafast synchrotron experiments, or IMPULSE, is a 12.6-mm bore light-gas gun (<1 km/s projectile velocity) designed specifically for performing dynamic compression experiments using the advanced imaging and X-ray diffraction methods available at synchrotron sources. The gun system, capable of reaching projectile velocities up to 1 km/s, was designed to be portable for quick insertion/removal in the experimental hutch at Sector 32 ID-B of the Advanced Photon Source (Argonne, IL) while allowing the target chamber to rotate for sample alignment with the beam. A key challenge in using the gun system to acquire dynamic data on the nanosecond time scale was synchronization (or bracketing) of the impact event with the incident X-ray pulses (80 ps width). A description of the basic gun system used in previous work is provided along with details of an improved launch initiation system designed to significantly reduce the total system time from launch initiation to impact. Experiments were performed to directly measure the gun system time and to determine the gun performance curve for projectile velocities ranging from 0.3 to 0.9 km/s. All results show an average system time of 21.6 ± 4.5 ms, making it possible to better synchronize the gun system and detectors to the X-ray beam.

Gas gun shock experiments with single-pulse x-ray phase contrast imaging and diffraction at the Advanced Photon Source.

The highly transient nature of shock loading and pronounced microstructure effects on dynamic materials response call for in situ, temporally and spatially resolved, x-ray-based diagnostics. Third-generation synchrotron x-ray sources are advantageous for x-ray phase contrast imaging (PCI) and diffraction under dynamic loading, due to their high photon fluxes, high coherency, and high pulse repetition rates. The feasibility of bulk-scale gas gun shock experiments with dynamic x-ray PCI and diffraction measurements was investigated at the beamline 32ID-B of the Advanced Photon Source. The x-ray beam characteristics, experimental setup, x-ray diagnostics, and static and dynamic test results are described. We demonstrate ultrafast, multiframe, single-pulse PCI measurements with unprecedented temporal (<100 ps) and spatial (∼2 µm) resolutions for bulk-scale shock experiments, as well as single-pulse dynamic Laue diffraction. The results not only substantiate the potential of synchrotron-based experiments for addressing a variety of shock physics problems, but also allow us to identify the technical challenges related to image detection, x-ray source, and dynamic loading.

Reflectance changes during shock-induced phase transformations in metals.

In performing shock wave experiments to study the characteristics of metals at high pressures, wave profiles (i.e., velocity measurements of the surface of the sample) are an established and useful way to study phase transformations. For example, a sudden change in the velocity or its slope can occur when the phase transformation induces a large volume change leading to a change in particle velocity. Allowing the shock to release into a transparent window that is in contact with the sample surface allows the study of conditions away from the shock Hugoniot. However, in cases where the wave profile is not definitive, an additional phase-transformation diagnostic is often useful. Changes in the electronic structure of the atoms in the crystal offer opportunities to develop new phase-change diagnostics. We have studied optical reflectance changes for several shock-induced phase transformations to see whether reflectance changes might be a generally applicable phase-transformation diagnostic. Shocks were produced by direct contact with explosives or with impacts from guns. Optical wavelengths for the reflectance measurements ranged from 355 to 700 nm. We studied samples of tin, iron, gallium, and cerium as each passed through a phase transformation during shock loading and, if observable, a reversion upon unloading. In addition to metals with complicated phase diagrams, we also measured dynamic, pressure-induced changes in the reflectivity of aluminum. For rapid solid-solid phase changes in tin and iron, we saw small changes in the surface scattering characteristics, perhaps from voids or rough areas frozen into the surface of the sample as it transformed to a new crystal structure. For melt in gallium and cerium, we saw changes in the wavelength dependence of the reflectance, and we surmise that these changes may result from changes in the crystal electronic structure. It appears that reflectance measurements can be a significant part of a larger suite of diagnostics to search for difficult-to-detect phase transformations.

Readability assessment of questionnaires frequently used in sex and marital therapy.

The present investigation evaluated the readability of a selected group of inventories frequently employed in assessing various aspects of sexual and marital functioning. The nine inventories selected are: the Bem Sex Role Inventory, the Derogatis Sexual Functioning Inventory, the Dyadic Adjustment Scale, the Relationship Belief Inventory, the Sexual Arousability Inventory, the Sexual Behavior Inventories (female, male, and couple versions), and the Sexual Interaction Inventory. The approach of Forbes and Cottle was utilized to assess reading level because it uses vocabulary difficulty and does not require complete sentences. The results indicated that a college-level reading ability was necessary to comprehend many of the items contained in most of the inventories. Thus, caution must be exercised when administering such inventories to individuals with a low level of educational attainment in order to avoid unreliable and invalid test results.

Modulated FT-Raman Fiber-Optic Spectroscopy: A Technique for Remotely Monitoring High-Temperature Reactions in Real-Time.

A modification to a commercial FT-Raman spectrometer is presented for the elimination of thermal backgrounds in FT-Raman spectra. The modification involves the use of a mechanical chopper to modulate the CW laser, remote collection of the signal via fiber optics, and connection of a dual-phase digital signal processor lock-in amplifier between the detector and the spectrometer's collection electronics to demodulate and filter the optical signals. The resulting modulated FT-Raman fiber-optic spectrometer is capable of completely eliminating thermal backgrounds at temperatures exceeding 370 °C. In addition, the signal/noise of generated Raman spectra is greater than for spectra collected with the conventional FT-Raman under identical conditions and incident laser power. This is true for both room-temperature and hot samples. The method allows collection of data using preexisting spectrometer software. The total cost of the modification (excluding fiber optics) is ∼$3000 and requires less than 2 h to implement. This is the first report of FT-Raman spectra collected at temperatures in excess of 300 °C in the absence of thermal backgrounds.

Serratia liquefaciens bloodstream infections from contamination of epoetin alfa at a hemodialysis center.

BACKGROUND: In a one month period, 10 Serratia liquefaciens bloodstream infections and 6 pyrogenic reactions occurred in outpatients at a hemodialysis center. METHODS: We performed a cohort study of all hemodialysis sessions on days that staff members reported S. liquefaciens bloodstream infections or pyrogenic reactions. We reviewed procedures and cultured samples of water, medications, soaps, and hand lotions and swabs from the hands of personnel. RESULTS: We analyzed 208 sessions involving 48 patients. In 12 sessions, patients had S. liquefaciens bloodstream infections, and in 8, patients had pyrogenic reactions without bloodstream infection. Sessions with infections or reactions were associated with higher median doses of epoetin alfa than the 188 other sessions (6500 vs. 4000 U, P=0.03) and were more common during afternoon or evening shifts than morning shifts (P=0.03). Sessions with infections or reactions were associated with doses of epoetin alfa of more than 4000 U (multivariate odds ratio, 4.0; 95 percent confidence interval, 1.3 to 12.3). A review of procedures revealed that preservative-free, single-use vials of epoetin alfa were punctured multiple times, and residual epoetin alfa from multiple vials was pooled and administered to patients. S. liquefaciens was isolated from pooled epoetin alfa, empty vials of epoetin alfa that had been pooled, antibacterial soap, and hand lotion. All the isolates were identical by pulsed-field gel electrophoresis. After the practice of pooling epoetin alfa was discontinued and the contaminated soap and lotion were replaced, no further S. liquefaciens bloodstream infections or pyrogenic reactions occurred at this hemodialysis facility. CONCLUSIONS: Puncturing single-use vials multiple times and pooling preservative-free epoetin alfa caused this outbreak of bloodstream infections in a hemodialysis unit. To prevent similar outbreaks, medical personnel should follow the manufacturer's guidelines for the use of preservative-free medications.