RESUMEN
Spider webs are incredible biological structures, comprising thin but strong silk filament and arranged into complex hierarchical architectures with striking mechanical properties (e.g., lightweight but high strength, achieving diverse mechanical responses). While simple 2D orb webs can easily be mimicked, the modeling and synthesis of 3D-based web structures remain challenging, partly due to the rich set of design features. Here, we provide a detailed analysis of the heterogeneous graph structures of spider webs and use deep learning as a way to model and then synthesize artificial, bioinspired 3D web structures. The generative models are conditioned based on key geometric parameters (including average edge length, number of nodes, average node degree, and others). To identify graph construction principles, we use inductive representation sampling of large experimentally determined spider web graphs, to yield a dataset that is used to train three conditional generative models: 1) an analog diffusion model inspired by nonequilibrium thermodynamics, with sparse neighbor representation; 2) a discrete diffusion model with full neighbor representation; and 3) an autoregressive transformer architecture with full neighbor representation. All three models are scalable, produce complex, de novo bioinspired spider web mimics, and successfully construct graphs that meet the design objectives. We further propose an algorithm that assembles web samples produced by the generative models into larger-scale structures based on a series of geometric design targets, including helical and parametric shapes, mimicking, and extending natural design principles toward integration with diverging engineering objectives. Several webs are manufactured using 3D printing and tested to assess mechanical properties.
Asunto(s)
Aprendizaje Profundo , Arañas , Animales , Algoritmos , Comercio , CitoesqueletoRESUMEN
The ForMAX beamline at the MAX IV Laboratory provides multiscale and multimodal structural characterization of hierarchical materials in the nanometre to millimetre range by combining small- and wide-angle X-ray scattering with full-field microtomography. The modular design of the beamline is optimized for easy switching between different experimental modalities. The beamline has a special focus on the development of novel fibrous materials from forest resources, but it is also well suited for studies within, for example, food science and biomedical research.
RESUMEN
In order to obtain highly active catalytic materials for oxidation of carbon monoxide and volatile organic compounds (VOCs), monometallic platinum, copper, and palladium catalysts were prepared by using of two types of ZSM-5 zeolite as supports-parent ZSM-5 and the same one treated by HF and NH4F buffer solution. The catalyst samples, obtained by loading of platinum, palladium, and copper on ZSM-5 zeolite treated using HF and NH4F buffer solution, were more active in the reaction of CO and benzene oxidation compared with catalyst samples containing untreated zeolite. The presence of secondary mesoporosity played a positive role in increasing the catalytic activity due to improved reactant diffusion. The only exception was the copper catalysts in the reaction of CO oxidation, in which case the catalyst, based on untreated ZSM-5 zeolite, was more active. In this specific case, the key role is played by the oxidative state of copper species loaded on the ZSM-5 zeolites.
RESUMEN
The impressive mechanical properties of natural composites, such as nacre, arise from their multiscale hierarchical structures, which span from nano- to macroscale and lead to effective energy dissipation. While some synthetic bioinspired materials have achieved the toughness of natural nacre, current production methods are complex and typically involve toxic chemicals, extreme temperatures, and/or high pressures. Here, the exclusive use of bacteria to produce nacre-inspired layered calcium carbonate-polyglutamate composite materials that reach and exceed the toughness of natural nacre, while additionally exhibiting high extensibility and maintaining high stiffness, is introduced. The extensive diversity of bacterial metabolic abilities and the possibility of genetic engineering allows for the creation of a library of bacterially produced, cost-effective, and eco-friendly composite materials.
Asunto(s)
Materiales Biomiméticos/química , Nanocompuestos/química , Carbonato de Calcio/química , Microscopía Electrónica de Rastreo , Ácido Poliglutámico/químicaRESUMEN
Defined hierarchical materials promise cell analysis and call for application-driven design in practical use. The further issue is to develop advanced materials and devices for efficient label-free cell capture with minimum instrumentation. Herein, the design of hierarchical beads is reported for efficient label-free cell capture. Silica nanoparticles (size of ≈15 nm) are coated onto silica spheres (size of ≈200 nm) to achieve nanoscale surface roughness, and then the rough silica spheres are combined with microbeads (≈150-1000 µm in diameter) to assemble hierarchical structures. These hierarchical beads are built via electrostatic interaction, covalent bonding, and nanoparticle adherence. Further, after functionalization by hyaluronic acid (HA), the hierarchical beads display desirable surface hydrophilicity, biocompatibility, and chemical/structural stability. Due to the controlled surface topology and chemistry, HA-functionalized hierarchical beads afford high cell capture efficiency up to 98.7% in a facile label-free manner. This work guides the development of label-free cell capture techniques and contributes to the construction of smart interfaces in bio-systems.
Asunto(s)
Microesferas , Coloración y Etiquetado , Células A549 , Humanos , Ácido Hialurónico/química , Células MCF-7RESUMEN
Here, a means of controlling the assembly pathways of p-conjugated oligoelectrolytes into supramolecular fibers and microtubes is presented, and it is shown how the addition of small end-caps to well-defined and pH-responsive conjugated oligomers can alter the balance between repulsive and attractive supramolecular forces and enables control of the morphology of the hierarchical assembly process. The assembly stages from nuclei to protofibers are evidenced and a hypothesis on the mechanism of microtubes formation using a combination of analytical methods is provided, revealing different degrees of order at different scales along the structural hierarchy.
RESUMEN
Hierarchical porous structures are ubiquitous in biological organisms and inorganic systems. Although such structures have been replicated, designed, and fabricated, they are often inferior to naturally occurring analogues. Apart from the complexity and multiple functionalities developed by the biological systems, the controllable and scalable production of hierarchically porous structures and building blocks remains a technological challenge. Herein, a facile and scalable approach is developed to fabricate hierarchical hollow spheres with integrated micro-, meso-, and macropores ranging from 1 nm to 100 µm (spanning five orders of magnitude). (Macro)molecules, micro-rods (which play a key role for the creation of robust capsules), and emulsion droplets have been successfully employed as multiple length scale templates, allowing the creation of hierarchical porous macrospheres. Thanks to their specific mechanical strength, these hierarchical porous spheres could be incorporated and assembled as higher level building blocks in various novel materials.
RESUMEN
A novel supramolecular alternating polymer is constructed based on double molecular recognition events of benzo-21-crown-7 with a secondary ammonium salt and of pillar[5]arene with a neutral guest. The resulting polymer is utilized to prepare hierarchical materials with different dimensionalities for the first time. These materials included zero-dimensional spherical aggregates, one-dimensional nanofibers, two-dimensional microstructured films, and three-dimensional ordered glue. This development will be helpful for designing and preparing supramolecular hierarchical materials with different dimensionalities.
RESUMEN
Our world is transforming into an interacting system of the physical world and the digital world. What will be the materials science in the new era? With the rising expectations of the rapid development of computers, information science and mathematical science including statistics and probability theory, 'data-driven materials design' has become a common term. There is knowledge and experience gained in the physical world in the form of know-how and recipes for the creation of material. An important key is how we establish vocabulary and grammar to translate them into the language of the digital world. In this article, we outline how materials science develops when it encounters mathematics, showing some emerging directions.
RESUMEN
Hierarchical nanomaterials are highly suitable as electrocatalysts and electrocatalyst supports in electrochemical energy conversion devices. The intrinsic kinetics of an electrocatalyst are associated with the nanostructure of the active phase and the support, while the overall properties are also affected by the mesostructure. Therefore, both structures need to be controlled. A comparative state-of-the-art review of catalysts and supports is provided along with detailed synthesis methods. To further improve the design of these hierarchical nanomaterials, in-depth research on the effect of materials architecture on reaction and transport kinetics is necessary. Inspiration can be derived from nature, which is full of very effective hierarchical structures. Developing fundamental understanding of how desired properties of biological systems are related to their hierarchical architecture can guide the development of novel catalytic nanomaterials and nature-inspired electrochemical devices.
RESUMEN
Bio-derived polysaccharide aerogels are of interest for a broad range of applications. To date, these aerogels have been obtained through the time- and solvent-intensive procedure of hydrogel fomation, solvent exchange, and scCO2 drying, which offers little control over meso/macropore distribution. A simpler and more versatile route is developed, using freeze drying to produce highly mesoporous polysaccharide aerogels with various degrees of macroporosity. The hierarchical pore distribution is controlled by addition of different quantities of t-butanol (TBA) to hydrogels before drying. Through a systematic study an interesting relationship between the mesoporosity and t-butanol/water phase diagram is found, linking mesoporosity maxima with eutectic points for all polysaccharides studied (pectin, starch, and alginic acid). Moreover, direct gelation of polysaccharides in aqueous TBA offers additional time savings and the potential for solvent reuse. This finding is a doorway to more accessible polysaccharide aerogels for research and industrial scale production, due to the widespread accessibility of the freeze drying technology and the simplicity of the method.
Asunto(s)
Hidrogeles/síntesis química , Polisacáridos/química , Alcohol terc-Butílico/química , Desecación , Liofilización , Hidrogeles/química , Ensayo de Materiales , Polisacáridos/síntesis química , Porosidad , Estrés Mecánico , Propiedades de Superficie , Temperatura , Resistencia a la Tracción , Agua/químicaRESUMEN
Lyotropic non-lamellar liquid crystalline (LLC) aqueous nanodispersions hold a great promise in drug solubilization and delivery, but these nanosystems often induce severe hemolysis and complement activation, which limit their applications for safe intravenous administration. Here, we engineer and characterize LLC aqueous nanodispersions from a binary lipid mixture consisting of 2,3-dihydroxypropyl oleate (glyceryl monooleate) and medium-chain triglycerides with tunable internal nanostructures and improved hemocompatibility controlled by citrem as stabilizer. Citrem, in a concentration-dependent manner, modulates the internal nanostructure of LLC dispersions from a biphasic H2/L2 feature to a neat L2 phase, where the latter resembles "thread-like" swollen micelles. Citrem stabilization totally overcomes hemolysis and complement activation, thus realizing the potential of the engineered LLC aqueous nanodispersions for exploitation in intravenous delivery of drugs and contrast agents. FROM THE CLINICAL EDITOR: The complement system often gets activated after intravenous injection of nano drug-carriers. This may result in detrimental systemic effects. The authors described in this article the use of citrem as a stabilizing agent and showed the ability of this agent to abolish complement activation. Hence, citrem may prove to be an important component of tunable LLC nanocarriers that may be useful in future clinical setting.
Asunto(s)
Ácido Cítrico/análogos & derivados , Portadores de Fármacos/química , Excipientes/química , Glicéridos/química , Nanoestructuras/química , Triglicéridos/química , Ácido Cítrico/efectos adversos , Activación de Complemento/efectos de los fármacos , Portadores de Fármacos/efectos adversos , Esterificación , Excipientes/efectos adversos , Glicéridos/efectos adversos , Humanos , Cristales Líquidos/efectos adversos , Cristales Líquidos/química , Nanoestructuras/efectos adversos , Dispersión del Ángulo Pequeño , Triglicéridos/efectos adversos , Difracción de Rayos XRESUMEN
The electrochemical performance of supercapacitors relies not only on the exploitation of high-capacity active materials, but also on the rational design of superior electrode architectures. Herein, a novel supercapacitor electrode comprising 3D hierarchical mixed-oxide nanostructured arrays (NAs) of C/CoNi3 O4 is reported. The network-like C/CoNi3 O4 NAs exhibit a relatively high specific surface area; it is fabricated from ultra-robust Co-Ni hydroxide carbonate precursors through glucose-coating and calcination processes. Thanks to their interconnected three-dimensionally arrayed architecture and mesoporous nature, the C/CoNi3 O4 NA electrode exhibits a large specific capacitance of 1299 F/g and a superior rate performance, demonstrating 78% capacity retention even when the discharge current jumps by 100 times. An optimized asymmetric supercapacitor with the C/CoNi3 O4 NAs as the positive electrode is fabricated. This asymmetric supercapacitor can reversibly cycle at a high potential of 1.8 V, showing excellent cycling durability and also enabling a remarkable power density of â¼13 kW/kg with a high energy density of â¼19.2 W·h/kg. Two such supercapacitors linked in series can simultaneously power four distinct light-emitting diode indicators; they can also drive the motor of remote-controlled model planes. This work not only presents the potential of C/CoNi3 O4 NAs in thin-film supercapacitor applications, but it also demonstrates the superiority of electrodes with such a 3D hierarchical architecture.
RESUMEN
Three dimensional hierarchical materials are widespread in nature but are difficult to synthesize by using self-assembly/organization. Here, we employ a gel-liquid interface to obtain centimeter-long â¼100â µm diameter tubes with complex mineral wall structures that grow from the interface into solution. The gel, made from gelatin, is loaded with metal chloride salt, whereas the solution is a high pH anion source. Tubes were obtained with a range of cations (Ca(2+) , Sr(2+) , Ba(2+) , Cu(2+) , and Zn(2+) ) and anions (CO3 (2-) and PO4 (3-) ). The crystalline phases found in the tube walls corresponded to expectations from solution chemistries and phase solubilities. The growth mechanism is found to be akin to that of chemical gardens. The divalent cations modify the strength of the gelatin gel in a manner that involves not only simple electrostatic screening, but also ion-specific effects. Thus, tubes were not obtained for those ions and/or concentrations that significantly changed the gel's mechanical structure. At high Cu(2+) loading, for example, vertical convection bands, not Liesegang bands, were observed in the gels.
RESUMEN
Polysaccharides constitute over 90% of the carbohydrate mass in nature, which makes them a promising feedstock for manufacturing sustainable materials. Polysaccharide particles (PSPs) are used as effective scavengers, carriers of chemical and biological cargos, and building blocks for the fabrication of macroscopic materials. The biocompatibility and degradability of PSPs are advantageous for their uses as biomaterials with more environmental friendliness. This review highlights the progresses in PSP applications as advanced functional materials, by describing PSP extraction, preparation, and surface functionalization with a variety of functional groups, polymers, nanoparticles, and biologically active species. This review also outlines the fabrication of PSP-derived macroscopic materials, as well as their applications in soft robotics, sensing, scavenging, water harvesting, drug delivery, and bioengineering. The paper is concluded with an outlook providing perspectives in the development and applications of PSP-derived materials.
RESUMEN
The enamel of mammalian teeth is a highly mineralized tissue that must endure a lifetime of cyclic contact and is inspiring the development of next-generation engineering materials. Attempts to implement enamel-inspired structures in synthetic materials have had limited success, largely due to the absence of a detailed understanding of its microstructure. The present work used synchrotron phase-contrast microCT imaging to evaluate the three-dimensional microstructure of enamel from four mammals including Lion, Gray Wolf, Snow Leopard, and Black Bear. Quantitative results of image analysis revealed that the decussation pattern of enamel consists of discrete diazone (D) and parazone (P) bands of rods organized with stacking arrangement of D+/P/D-/P in all mammals evaluated; the D+ and D- refer to distinct diazone bands with juxtaposed rod orientations from the reference plane. Furthermore, the rod orientations in the bands can be described in terms of two principal angles, defined here as the pitch and yaw. While the pitch angle increases from the outer enamel to a maximum (up to ≈ 40°) near the dentin enamel junction, minimal spatial variations are observed in yaw across the enamel thickness. There are clear differences in the decussation parameters of enamel across species that are interpreted here with respect to the structural demands placed on their teeth. The rod pitch and band width of enamel are identified as important design parameters and appear to be correlated with the bite force quotient of the four mammals evaluated. STATEMENT OF SIGNIFICANCE: The multi-functionality of tooth enamel requires both hardness and resistance to fracture, properties that are generally mutually exclusive. Ubiquitous to all mammalian teeth, the enamel is expected to have undergone adaptations in microstructure to accommodate the differences in diet, body size and bite force across animals. For the first time, we compare the complex three-dimensional microstructure of enamel from teeth of multiple mammalian species using synchrotron micro-computed tomography. The findings provide new understanding of the "design" of mammalian enamel microstructures, as well as how specific parameters associated with the decussation of rods appear to be engineered to modulate its fracture resistance.
Asunto(s)
Sincrotrones , Diente , Animales , Microtomografía por Rayos X , Mamíferos , Esmalte Dental/diagnóstico por imagenRESUMEN
The discovery of self-organization principles that enable scalable routes toward complex functional materials has proven to be a persistent challenge. Here, reaction-diffusion driven, immersion-controlled patterning (R-DIP) is introduced, a self-organization strategy using immersion-controlled reaction-diffusion for targeted line patterning in thin films. By modulating immersion speeds, the movement of a reaction-diffusion front over gel films is controlled, which induces precipitation of highly uniform lines at the reaction front. A balance between the immersion speed and diffusion provides both hands-on tunability of the line spacing ( d = 10 - 300 µ m $d = 10-300 \; \umu \text{m}$ ) as well as error-correction against defects. This immersion-driven patterning strategy is widely applicable, which is demonstrated by producing line patterns of silver/silver oxide nanoparticles, silver chromate, silver dichromate, and lead carbonate. Through combinatorial stacking of different line patterns, hybrid materials with multi-dimensional patterns such as square-, diamond-, rectangle-, and triangle-shaped motifs are fabricated. The functionality potential and scalability is demonstrated by producing both wafer-scale diffraction gratings with user-defined features as well as an opto-mechanical sensor based on Moiré patterning.
RESUMEN
Inorganic-organic mesophase materials provide a wide range of tunable properties, which are often highly dependent on their nano-, micro-, or meso-scale compositions and structures. Among these are macroscopic orientational order and corresponding anisotropic material properties, the adjustability of which are difficult to achieve. This is due to the complicated transient and coupled transport, chemical reaction, and surface processes that occur during material syntheses. By understanding such processes, general criteria are established and used to prepare diverse mesostructured materials with highly aligned channels with uniform nanometer dimensions and controllable directionalities over macroscopic dimensions and thicknesses. This is achieved by using a micropatterned semipermeable poly(dimethylsiloxane) stamp to manage the rates, directions, and surfaces at which self-assembling phases nucleate and the directions that they grow. This enables mesostructured surfactant-directed silica and titania composites, including with functional guest species, and mesoporous carbons to be prepared with high degrees of hexagonal order, as well as controllable orthogonal macroscopic orientational order. The resulting materials exhibit novel anisotropic properties, as demonstrated by the example of direction-dependent photocurrent generation, and are promising for enhancing the functionality of inorganic-organic nanocomposite materials in separations, catalysis, and energy conversion applications.
RESUMEN
In this study, in operandi SAXS experiments were conducted on samples of human hair with a varying degree of strain (2% within the elastic region and 10% beyond). Four different features in the SAXS patterns were evaluated: The intermediate filament distance perpendicular to and the distance from the meridional arc in the load direction, as well as the distances of the lipid bilayer peak in and perpendicular to the load direction. From the literature, one concludes that polar lipids in the cuticle are the origin of the lipid peak in the SAXS pattern, and this study shows that the observed strain in the lipids is much lower than in the intermediate filaments. We support these findings with SEM micrographs, which show that the scales in the cuticle deform much less than the cortex. The observed deformation of the intermediate filaments is very high, about 70% of the macrostrain, and the ratio of the transverse strain to the longitudinal strain at the nanoscale gives a Poisson ratio of νnano = 0.44, which is typical for soft matter. This work also finds that by varying the time period between two strain cycles, the typical strain recovery time is about 1000 min, i.e., one day. After this period, the structure is nearly identical to the initial structure, which suggests an interpretation that this is the typical time for the self-healing of hair after mechanical treatment.
RESUMEN
The high salinity of seawater often strongly affects the activity and stability of photocatalysts utilized for photodriven seawater splitting. The current investigation is focused on the photocatalyst H-TiO2/Cu2O, comprised of hydroxyl-enriched hollow mesoporous TiO2 microspheres containing incorporated Cu2O nanoparticles. The design of H-TiO2/Cu2O is based on the hypothesis that the respective hollow and mesoporous structure and hydrophilic surfaces of TiO2 microspheres would stabilize Cu2O nanoparticles in seawater and provide efficient and selective proton adsorption. H-TiO2/Cu2O shows hydrogen production performances of 45.7 mmol/(g·h) in simulated seawater and 17.9 mmol/(g·h) in natural seawater, respectively. An apparent quantum yield (AQY) in hydrogen production of 18.8% in water (and 14.9% in natural seawater) was obtained at 365 nm. Moreover, H-TiO2/Cu2O displays high stability and can maintain more than 90% hydrogen evolution activity in natural seawater for 30 h. A direct mass- and energy- transfer mechanism is proposed to clarify the superior performance of H-TiO2/Cu2O in seawater splitting.