Green method by National Environmental Methods Index and Eco-Scale Assessment for evaluation of gatifloxacin-based product by HPLC.

The literature reveals gaps in the availability of green analytical methods for assessing products containing gatifloxacin (GFX), a fluoroquinolone. Presently, method development is supported by tools such as the National Environmental Methods Index (NEMI) and Eco-Scale Assessment (ESA), which offer objective insights into the environmental friendliness of analytical procedures. The objective of this work was to develop and validate a green method by the NEMI and ESA to quantify GFX in eye drops using HPLC. The method utilized a C8 column (4.6 × 150 mm, 5 µm), with a mobile phase of purified water containing 2% acetic acid and ethanol (70:30, v/v). The injection volume was 10 µL and the flow rate was 0.7 mL/min in isocratic mode at 25°C, with detection performed at 292 nm. The method demonstrated linearity in the range of 2-20 µg/mL, and precision at intra-day (relative standard deviation [RSD] 1.44%), inter-day (RSD 3.45%), and inter-analyst (RSD 2.04%) levels. It was selective regarding the adjuvants of the final product (eye drops) and under forced degradation conditions. The method was accurate (recovery 101.07%) and robust. The retention time for GFX was approximately 3.5 min. The greenness of the method, as evaluated by the NEMI, showed four green quadrants, and by ESA, it achieved a score of 88.

Green Methods to Recover Bioactive Compounds from Food Industry Waste: A Sustainable Practice from the Perspective of the Circular Economy.

The worrying and constant increase in the quantities of food and beverage industry by-products and wastes is one of the main factors contributing to global environmental pollution. Since this is a direct consequence of continuous population growth, it is imperative to reduce waste production and keep it under control. Re-purposing agro-industrial wastes, giving them new life and new directions of use, is a good first step in this direction, and, in global food production, vegetables and fruits account for a significant percentage. In this paper, brewery waste, cocoa bean shells, banana and citrus peels and pineapple wastes are examined. These are sources of bioactive molecules such as polyphenols, whose regular intake in the human diet is related to the prevention of various diseases linked to oxidative stress. In order to recover such bioactive compounds using more sustainable methods than conventional extraction, innovative solutions have been evaluated in the past decades. Of particular interest is the use of deep eutectic solvents (DESs) and compressed solvents, associated with green techniques such as microwave-assisted extraction (MAE), ultrasonic-assisted extraction (UAE), pressurized liquid extraction (PLE) and pulsed-electric-field-assisted extraction (PEF). These novel techniques are gaining importance because, in most cases, they allow for optimizing the extraction yield, quality, costs and time.

Green synthesis of silver nanoparticle prepared with Ocimum species and assessment of anticancer potential.

Silver nanoparticles (AgNPs) have gained much attention due to their unique physical, and chemical properties. Integration of phytochemicals in nanoformulation might have higher applicability in healthcare. Current work demonstrates the synthesis of green AgNPs with O. gratissimum (gr-AgNPs) O. tenuiflorum (te-AgNPs) and O. americanum (am-AgNPs) followed by an evaluation of their antimicrobial and anticancer properties. SEM analysis revealed spherical-shaped particles with average particle sizes of 69.0 ± 5 nm for te-AgNPs, 46.9 ± 9 nm for gr-AgNPs, and 58.5 ± 18.7 nm for am-AgNPs with a polydispersity index below 0.4. The synthesized am-AgNPs effectively inhibited Klebsiella pneumonia, Escherichia coli, Staphylococcus aureus, Aspergillus niger, and Candida albicans with 23 ± 1.58 mm, 20 ± 1.68 mm, 22 ± 1.80 mm, 26 ± 1.85 mm, and 22 ± 1.40 nm of zone of inhibition respectively. Synthesized AgNPs also induced apoptotic cell death in MCF-7 in concentration-dependent manner. IC50 values for am-AgNPs, te-AgNPs, and gr-AgNPs were 14.78 ± 0.89 µg, 18.04 ± 0.63 and 15.41 ± 0.37 µg respectively which suggested that am-AgNPs were the most effective against cancer. At higher dose size (20 µg) AgNPs were equally effective to commercial standard Doxorubicin (DOX). In comparison to te-AgNPs and gr-AgNPs, am-AgNPs have higher in vitro anticancer and antimicrobial effects. The work reported Ocimum americanum for its anticancer properties with chemical profile (GCMS) and compared it with earlier reported species. The activity against microbial pathogens and selected cancer cells clearly depicted that these species have distinct variations in activity. The results have also emphasized on higher potential of biogenic silver nanoparticles in healthcare but before formulation of commercial products, detailed analysis is required with human and animal models.

Greenness and whiteness assessment of a sustainable voltammetric method for difluprednate estimation in the presence of its alkaline degradation product.

Nowadays, scientists are currently attempting to lessen the harmful effects of chemicals on the environment. Stability testing identifies how a drug's quality changes over time. The current work suggests a first and sustainable differential pulse voltammetry technique for quantifying difluprednate (DIF) as an anti-inflammatory agent in the presence of its alkaline degradation product (DEG). The optimum conditions for the developed method were investigated with a glassy carbon electrode and a scan rate of 100 mV s-1. The linearity range was 2.0 × 10-7-1.0 × 10-6 M for DIF. DIF was found to undergo alkaline degradation, when refluxed for 8 h using 2.0 M NaOH, and DEG was successfully characterized utilizing IR and MS/MS. The intended approach demonstrated the selectivity for DIF identification in pure, pharmaceutical, and degradation forms. The student's t-test and F value were used to compare the suggested and reported approaches statistically. The results were validated according to ICH requirements. The greenness of the studied approach was evaluated using the Green Analytical Procedure Index and the Analytical Greenness metric. Additionally, the whiteness features of the proposed approach were examined with the recently released red, green, and blue 12 model, and the recommended strategy performed better than the reported approaches in greenness and whiteness.

Developing of an eco-friendly liquid-liquid microextraction method by using menthol-based hydrophobic deep eutectic solvent for determination of basic fuchsin dye: assessment of the greenness profile.

Herein, we aimed to develop a new environmentally friendly liquid-liquid microextraction (LLME) method based on hydrophobic deep eutectic solvent (hDES) synthesized using biodegradable dl-menthol and decanoic acid for the spectrophotometric determination of toxic basic fuchsin dye in environmental water samples. The parameters affecting the extraction efficiency such as pH, mole ratio, and volume of hDES (1:2) and type and volume of organic solvent, sample volume, times of vortex, ultrasonic bath and centrifuge, ionic strength, and matrix effect were investigated and optimized. Under optimal conditions, the calibration curve showed linearity in the range of 7.4-167 µg L-1 with a coefficient of determination of 0.9994. The limit of detection, intra-day and inter-day precision, and recovery values were 2.25 µg L-1, 2.46% and 4.45%, and 105 ± 3%, respectively. The preconcentration and enrichment factors were found to be 30 and 61.5, respectively. The proposed hDES-LLME methodology was successfully applied to the environmental water samples to detect toxic BF dye (95-105%). Finally, the ecological impact of the suggested method was evaluated using the analytical eco-scale (PPS:88), complementary green analytical procedure indexe (ComplexGAPI), and the Analytical GREEnness tool (0.63). The assessment results showed that the presented analytical method can be regarded as a green LLME approach for the determination of the BF in water.

Recent Advances of carbon Pathways for Sustainable Environment development.

Carbon dots (CDs) are an emerging type of carbon nanomaterial with strong biocompatibility, distinct chemical and physical properties, and low toxicity. CDs may emit fluorescence in the ultraviolet (UV) to near-infrared (NIR) range, which renders them beneficial for biomedical applications. CDs are usually made from carbon precursors and can be synthesized using top-down and bottom-up methods and it can be easily functionalized using different methods. For specific cases of biomedical applications carbon dot functionalization augments the materials' characteristics. Novel functionalization techniques are still being investigated. This review will look at the benefits of functionalization to attain a high yield and various biological applications. Biomedical applications such as photodynamic and photothermal therapy, biosensing, bioimaging, and antiviral and antibacterial properties will be covered in this review. The future applications of green synthesized carbon dots will be determined in part by this review.

Comparative assessment of the biological activity of the green synthesized silver nanoparticles and aqueous leaf extract of Perilla frutescens (L.).

Green synthesized nanoparticles (GSNPs) display fascinating properties compared to physical and chemical synthesized ones. GSNPs are currently used in numerous applications such as food packaging, surface coating agents, environmental remediation, antimicrobial, and medicine. In the present study, the aqueous leaf extract of Perilla frutescens L. having suitable capping, reducing, and stabilizing compounds was used for green synthesis of silver nanoparticles (Pf-AgNPs). The bioreductant capacity of aqueous leaf extract of P. frutescens for Pf-AgNPs was determined by different confirmatory techniques including UV-Visible spectroscopy, XRD, FESEM, EDX, zeta potential, DLS, SERS, and FTIR analysis. The results exhibited that Pf-AgNPs had optimal size (< 61 nm), shape (spherical), and stability (- 18.1 mV). The antioxidant activity of Pf-AgNPs with both DPPH and FRAP assays was significantly higher compared to P. frutescens extract. Furthermore, Pf-AgNPs had high antimicrobial activity against Escherichia coli and Staphylococcus aureus (MIC = 0.78 mg/mL), and Candida albicans (MIC = 8 mg/mL) while the plant extract showed low antimicrobial activity against both bacterial strains and the fungus tested. Pf-AgNPs and P. frutescens extract also exhibited moderate toxicity on MCF-7 cancer cells with IC50 values of 346.2 and 467.4 µg/mL, respectively. The results provide insights into using the biosynthesized Pf-AgNPs as an eco-friendly material for a wide range of biomedical applications.

Synthesis, Characterization, and Assessment of Anti-Cancer Potential of ZnO Nanoparticles in an In Vitro Model of Breast Cancer.

Advanced innovations for combating variants of aggressive breast cancer and overcoming drug resistance are desired. In cancer treatment, ZnO nanoparticles (NPs) have the capacity to specifically and compellingly activate apoptosis of cancer cells. There is also a pressing need to develop innovative anti-cancer therapeutics, and recent research suggests that ZnO nanoparticles hold great potential. Here, the in vitro chemical effectiveness of ZnO NPs has been tested. Zinc oxide (ZnO) nanoparticles were synthesized using Citrullus colocynthis (L.) Schrad by green methods approach. The generated ZnO was observed to have a hexagonal wurtzite crystal arrangement. The generated nanomaterials were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), UV-visible spectroscopy. The crystallinity of ZnO was reported to be in the range 50-60 nm. The NPs morphology showed a strong absorbance at 374 nm with an estimated gap band of 3.20 eV to 3.32 eV. Microscopy analysis proved the morphology and distribution of the generated nanoparticles to be around 50 nm, with the elemental studies showing the elemental composition of ZnO and further confirming the purity of ZnO NPs. The cytotoxic effect of ZnO NPs was evaluated against wild-type and doxorubicin-resistant MCF-7 and MDA-MB-231 breast cancer cell lines. The results showed the ability of ZnO NPs to inhibit the prefoliation of MCF-7 and MDA-MB-231 prefoliation through the induction of apoptosis without significant differences in both wild-type and resistance to doxorubicin.

Validation of a rapid and economical RP-HPLC method for simultaneous determination of metformin hydrochloride and sitagliptin phosphate monohydrate: Greenness evaluation using AGREE score.

Reported high performance liquid chromatographic (HPLC) methods for estimating metformin hydrochloride (MET) and sitagliptin phosphate monohydrate (SIT) are either laborious or contain higher proportions of organic solvents in mobile phase, thus presenting exorbitant procedures. So, a rapid, significantly more economical and eco-friendly HPLC method for synchronized analysis of both drugs was aimed to develop and validate in current study. Analytical evaluation was executed on Shimadzou⌖ C18 column (250mm × 4.6mm, 5µm) using acidified water and methanol 60:40 (v/v) as mobile phase at a flow of 1mL/min; while peaks were detected at 260nm at 25°C. Resultant values of accuracy, precision, linearity, limit of detection (LOD), limit of quantification (LOQ), robustness and specificity depicted that the method was validated in accordance with the ICH Guidelines. The approximate retention time for MET and SIT were 1.96 and 3.70 min, correspondingly. The greenness score of the developed method was evaluated using AGREE software and was found better (0.81) as compared with the methods reported (<0.8). Conclusively, the developed method was time saving, economical, rapid, robust, rugged, precise, accurate and found to be applicable for simultaneous determination of MET and SIT in commercial tablets.

Greenness profile assessment of selective liquid chromatographic methods for determination of a quaternary antimigraine combination along with three of their related official impurities.

Two selective, sensitive and environmentally safe LC methods were developed and validated for determination of paracetamol, caffeine, ergotamine tartrate and metoclopramide in coformulated antimigraine tablets along with p-aminophenol, p-nitrophenol and theophylline as officially specified impurities. The first is based on high-performance thin-layer chromatography (HPTLC) coupled with densitometric quantitation. Separation was achieved on HPTLC silica gel 60 F254 plates as stationary phase using ethyl acetate:aqueous ammonium hydroxide solution:glacial acetic acid (10.0:0.4:0.1, by volume) as a developing system followed by scanning of the separated bands at 210.0 nm. The subsequent method depends on HPLC with diode array detection. The LC separation was accomplished on a Scharlau C18 (250 × 4.6 mm, 5 µm) column using a mixture of 20.0 mm sodium dihydrogen phosphate, pH 3.0, adjusted with o-phosphoric acid and methanol, at a flow rate of 1.3 mL/min in a gradient elution program. The separated peaks were detected at 210.0 nm. The proposed methods have been validated and proven to meet the requirements outlined in the International Council for Harmonisation (ICH) guidelines. The greenness profile evaluation was carried out using three tools, namely, the National Environmental Method Index, the Analytical EcoScale and the Green Analytical Procedure Index tool, and a comparative study was then conducted. Successful application of the developed methods for determination of the cited quaternary mixture in Metograine tablets confirms their suitability regarding the analytical performance and ecological impact in quality control assay and impurity profiling purposes.

Inherent Safety Assessment of Industrial-Scale Production of Chitosan Microbeads Modified with TiO2 Nanoparticles.

In this study, the inherent safety analysis of large-scale production of chitosan microbeads modified with TiO2 nanoparticles was developed using the Inherent Safety Index (ISI) methodology. This topology was structured based on two main stages: (i) Green-based synthesis of TiO2 nanoparticles based on lemongrass oil extraction and titanium isopropoxide (TTIP) hydrolysis, and (ii) Chitosan gelation and modification with nanoparticles. Stage (i) is divided into two subprocesses for accomplishing TiO2 synthesis, lemongrass oil extraction and TiO2 production. The plant was designed to produce 2033 t/year of chitosan microbeads, taking crude chitosan, lemongrass, and TTIP as the primary raw materials. The process was evaluated through the ISI methodology to identify improvement opportunity areas based on a diagnosis of process risks. This work used industrial-scale process inventory data of the analyzed production process from mass and energy balances and the process operating conditions. The ISI method comprises the Chemical Inherent Safety Index (CSI) and Process Inherent Safety Index (PSI) to assess a whole chemical process from a holistic perspective, and for this process, it reflected a global score of 28. Specifically, CSI and PSI delivered scores of 16 and 12, respectively. The analysis showed that the most significant risks are related to TTIP handling and its physical-chemical properties due to its toxicity and flammability. Insights about this process's safety performance were obtained, indicating higher risks than those from recommended standards.

Environmental Assessment of Enzyme Production and Purification.

The importance of bioprocesses has increased in recent decades, as they are considered to be more sustainable than chemical processes in many cases. E factors can be used to assess the sustainability of processes. However, it is noticeable that the contribution of enzyme synthesis and purification is mostly neglected. We, therefore, determined the E factors for the production and purification of 10 g enzymes. The calculated complete E factor including required waste and water is 37,835 gwaste·genzyme-1. This result demonstrates that the contribution of enzyme production and purification should not be neglected for sustainability assessment of bioprocesses.

A simple, economical and environmental-friendly method for staining protein gels using an extract from walnut-husk.

We wish to present a simple, rapid, cost-effective and environmentally safe method for staining proteins in polyacrylamide gels, using aqueous-based natural extracts from fresh green walnut (Juglans regia) hulls/husks. The technique takes not more than 10 min for staining and is comparable in sensitivity to the most commonly used Coomassie R-250 staining method when applied to different concentrations of Bovine Serum Albumin (BSA) and various amounts of E. coli extracts. The protein (BSA) band (~0.5 µg) and E. coli extract comprising ~25 µg total protein can be visualized on polyacrylamide gels. Compared to both Coomassie and Ponceau S staining, the current method displayed more intense bands when proteins are transferred to polyvinylidene fluoride (PVDF) membrane. Although the walnut-dye (WD) method does not require a time-consuming destaining step, excess background stain can simply be removed by washing in water. Extract from old dried black husks and extract from fresh green husks kept for a year was also effective. Using LC-MS, Myricetin and/or Kaempferol were found to be active compounds responsible for staining proteins. Compared to traditional Coomassie method, the inclusion of expensive and toxic solvents (methanol and acetic acid) is completely avoided resulting in positive health, environmental and economic benefits. In view of all these advantages, the WD method has immense potential to replace currently used protein staining techniques.

Evaluation of assay and in-vitro dissolution profile of certain fixed-dose combination using green analytical method.

OBJECTIVES: The pharmaceutical industry and the National Regulatory Authorities (NRAs) are now focusing on the dissolution of multi-component drugs for quality control testing and predicting in vivo results to further consolidation of the biowaiver concept. The mixed formulation of Ciprofloxacin hydrochloride (CIP) and Metronidazole (MET) have been used as a model for simultaneous determination and obtaining in vitro dissolution profiles by using green analysis method namely (UV-CWT(Db4, a=490)). MATERIAL AND METHODS: The proposed method (UV-CWT(Db4, a=490)) includes UV detection combined with Continuous Wavelet Transform (CWT) with Daubechies family and the order of fourth at the scaling factor (a=490) has been used and validated for analyzing and obtaining the dissolution profiles of the fixed-dose combination (CIP-MET). RESULTS: The proposed method (UV-CWT(Db4, a=490)) has been validated effectively in accordance with ICH rules, regarding linearity, specificity, rigor, and preciseness of the working range (3.0-16.0µg/mL) for both (CIP) and (MET), respectively. As well as figures of merit were concluded. The dissolution profiles of CIP-MET tablets were acquired by the proposed (UV-CWT (Db4, a=490)) and HPLC reported methods were conveniently compared using the indicators f1 and f2 ("difference" and "similarity") the results ensured that there were no statistically differences between the methods. In addition, the green assessment tool, namely analytical eco-scale, evaluated and compared the greenness of the suggested method (UV-CWT(Db4, a=490)) and HPLC reported one. CONCLUSION: The suggested process (UV-CWT(Db4, a=490)) was considered as an excellent green, rapid, accurate, economical and minimum-steps method for simultaneously resolve and construct the dissolution curves of a fixed-dose combination drug (CIP-MET) in a short time and without the use of organic solvents, enabling significant labor and resource savings.

Nano zinc elicited biochemical characterization, nutritional assessment, antioxidant enzymes and fatty acid profiling of rapeseed.

The use of nanomaterials in agriculture is a current need and could be helpful in overcoming food security risks. Brassica napus L. is the third most important crop for edible oil, having double low unsaturated fatty acids. In the present study, we investigated the effects of green synthesized Zn NPs on biochemical effects, antioxidant enzymes, nutritional quality parameters and on the fatty acid profile of rapeseed (B. napus). Plant-mediated synthesis of zinc nanoparticles (Zn NPs) was carried out using Mentha arvensis L. leaf extract followed by characterization through ultraviolet-visible spectroscopy (UV-vis), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-Ray (EDX), and X-Ray diffraction (XRD). NPs exhibited irregular shapes ranging in size from 30-70 nm and EDX analysis confirmed 96.08% of Zn in the sample. The investigated biochemical characterization (protein content, proline content, total soluble sugar (TSS), total flavonoid content (TFC), and total phenolic content (TPC) showed a substantial change on exposure to Zn NPs. A dose-dependent gradual increase was observed in the antioxidant enzymes, superoxide dismutase (SOD), peroxidase (POD), and catalase (CAT). Oil and moisture contents dropped significantly from the control level in the rapeseed (B. napus) varieties. However, different trends in nutritional (Zn, Na+, K+) and fatty acid profiling of B. napus have been noted. This study demonstrates that Zn NPs have the potential to improve the biochemical, nutritional, antioxidant enzymes, and fatty acid profile of B. napus varieties.

Therapeutic Potential Assessment of Green Synthesized Zinc Oxide Nanoparticles Derived from Fennel Seeds Extract.

PURPOSE: To study the cytotoxic evaluation, antimicrobial and confocal analysis of zinc oxide nanoparticles (ZnO NPs) obtained from a novel plant product fennel (Foeniculum vulgare Mill.) seed extract (FSE). METHODS: ZnO NPs were analyzed using UV-Vis spectroscopy, XRD, FTIR, TEM and EDX techniques. The MTT cell cytotoxicity assay measured the proliferation and survival of MCF-7 cells treated at different concentrations of FSE-derived ZnO NPs. The antimicrobial activity towards pathogenic bacteria and yeast strains was investigated. RESULTS: The UV-Vis spectra showed two peaks at 438 nm and 446 nm, confirming nanoparticle formation. The SEM morphology results showed porous ranging from 23-51 nm. The antitumor activity value (IC50) was at 50 µg/mL and 100 µg/mL. Besides, morphological changes of MCF-7, cells treated at different concentrations of FSE of ZnO NPs were observed in cell cultures transfected with a transient pCMV6-XL4-GFP-expressing vector containing C-terminal domain GFP-tagged proteins, which resulted in an apoptotic effect. Antimicrobial IZ ranged up No Inhibition to 18.00 ± 0.4. The IZ revealed at the highest concentration was E. faecium VRE and yeast Cryptococcus sp. (18.00 ± 0.4. mm), followed by S. aureus (17.00 ± 0.2 mm) and P. aeruginosa and the yeast C. parapsilosis (16 ± 0.4 mm). The IZ was equal to that caused by the nystatin to Cryptococcus sp., which was significantly highest than ampicillin treatments of S. aureus, P. aeruginosa, C. albicans, and C. parapsilosis. The MIC value of the FSE-derived ZnO NPs tested against E.faecium and C.albicans was 6.00 µg/mL (E. faecium and C. albicans). It was 32.00 µg/mL (S. aureus, S. typhimurium and Cryptococcus sp.), 64.00 µg/mL (P. aeruginosa), and 128 µg/mL (C. parapsilosis). CONCLUSION: As far as it is to our knowledge, this study established, for the first time, the biological activities of biosynthesized ZnO NPs from FSE and their synergistic therapeutic potential.

Cyanobacterial Polyhydroxyalkanoates: A Sustainable Alternative in Circular Economy.

Conventional petrochemical plastics have become a serious environmental problem. Its unbridled use, especially in non-durable goods, has generated an accumulation of waste that is difficult to measure, threatening aquatic and terrestrial ecosystems. The replacement of these plastics with cleaner alternatives, such as polyhydroxyalkanoates (PHA), can only be achieved by cost reductions in the production of microbial bioplastics, in order to compete with the very low costs of fossil fuel plastics. The biggest costs are carbon sources and nutrients, which can be appeased with the use of photosynthetic organisms, such as cyanobacteria, that have a minimum requirement for nutrients, and also using agro-industrial waste, such as the livestock industry, which in turn benefits from the by-products of PHA biotechnological production, for example pigments and nutrients. Circular economy can help solve the current problems in the search for a sustainable production of bioplastic: reducing production costs, reusing waste, mitigating CO2, promoting bioremediation and making better use of cyanobacteria metabolites in different industries.

From waste to health: sustainable exploitation of grape pomace seed extract to manufacture antioxidant, regenerative and prebiotic nanovesicles within circular economy.

Pomace seed extract loaded vesicles were prepared as promising technological and green solution to exploit agri-food wastes and by-products, and develop high value-added products for human health. An antioxidant extract rich in bioactive compounds (epicatechins, catechin, gallic acid, quercetin and procynidins) was obtained from the seeds isolated from the pomace of Cannonau red grape cultivar. The extract was incorporated into phospholipid vesicles ad hoc formulated for intestinal delivery, by combining them, for the first time, whit a maltodextrin (Glucidex). Glucidex-transfersomes, glucidex-hyalurosomes and glucidex-hyalutransferomes were prepared, characterized and tested. Glucidex-liposomes were used as reference. All vesicles were small in size (~ 150 nm), homogeneously dispersed and negatively charged. Glucidex-transfersomes and especially glucidex-hyalutransfersomes disclosed an unexpected resistance to acidic pH and high ionic strength, as they maintained their physico-chemical properties (size and size distribution) after dilution at pH 1.2 simulating the harsh gastric conditions. Vesicles were highly biocompatible and able to counteract the oxidative damages induced in Caco-2 cells by using hydrogen peroxide. Moreover, they promoted the formation of Lactobacillus reuteri biofilm acting as prebiotic formulation. Overall results suggest the potential of glucidex-hyalutransfersomes as food supplements for the treatment of intestinal disorders.

Novel HPTLC densitometric methods for determination of tamsulosin HCl and tadalafil in their newly formulated dosage form: Comparative study and green profile assessment.

A promising combination of tamsulosin HCl and tadalafil has recently been introduced for treating two prevalent and associated urological disorders: benign prostate hyperplasia and erectile dysfunction. Novel HPTLC methods were designed and validated for assaying the cited drugs in their challenging combined formulation. Separation was achieved using HPTLC silica gel 60 F254 plates as a stationary phase with a densitometric measurement at 280 nm. The proposed methods with two different chromatographic systems were successfully applied: a conventional mixture (method I) of ethyl acetate-toluene-methanol-ammonia (5:3:2:0.5, by volume) and a greener one (method II) with ethyl acetate-ethanol-ammonia (8:2:0.1, by volume). The two methods were evaluated through a comparative study in terms of selectivity, tailing factor, developing time and concentration ranges. The greenness profile for each method was then appraised with several green guides, namely GlaxoSmithKline solvent sustainability guide, Environmental, Health and Safety (EHS) tool, National Environmental Method Index (NEMI) and Eco-scale. Moreover, method specificity and peak homogeneity were evaluated by peak purity assessment using the winCATS® software spectral correlation tool. The methods have potential for being simple, fast, economic and selective, and the greener one could be a good option for sustainable analysis of the drugs.

Microwave-Assisted Catalytic Method for a Green Synthesis of Amides Directly from Amines and Carboxylic Acids.

Amide bonds are among the most interesting and abundant molecules of life and products of the chemical pharmaceutical industry. In this work, we describe a method of the direct synthesis of amides from carboxylic acids and amines under solvent-free conditions using minute quantities of ceric ammonium nitrate (CAN) as a catalyst. The reactions are carried out in an open microwave reactor and allow the corresponding amides to be obtained in a fast and effective manner when compared to other procedures of the direct synthesis of amides from acids and amines reported so far in the literature. The amide product isolation procedure is simple, environmentally friendly, and is performed with no need for chromatographic purification of secondary amides due to high yields. In this report, primary amines were used in most examples. However, the developed procedure seems to be applicable for secondary amines as well. The methodology produces a limited amount of wastes, and a catalyst can be easily separated. This highly efficient, robust, rapid, solvent-free, and additional reagent-free method provides a major advancement in the development of an ideal green protocol for amide bond formation.