ABSTRACT
Fruits can be divided into dry and fleshy types. Dry fruits mature through senescence and fleshy fruits through ripening. Previous studies have indicated that partially common molecular networks could govern fruit maturation in these different fruit types. However, the nature of such networks remains obscure. CLASS-II KNOX genes were shown to regulate the senescence of the Arabidopsis (Arabidopsis thaliana) dry fruits, the siliques, but their roles in fleshy-fruit development are unknown. Here, we investigated the roles of the tomato (Solanum lycopersicum) CLASS-II KNOX (TKN-II) genes in fleshy fruit ripening using knockout alleles of individual genes and an artificial microRNA line (35S:amiR-TKN-II) simultaneously targeting all genes. 35S:amiR-TKN-II plants, as well as a subset of tkn-II single and double mutants, have smaller fruits. Strikingly, the 35S:amiR-TKN-II and tknII3 tknII7/+ fruits showed early ripening of the locular domain while their pericarp ripening was stalled. Further examination of the ripening marker-gene RIPENING INHIBITOR (RIN) expression and 35S:amiR-TKN-II rin-1 mutant fruits suggested that TKN-II genes arrest RIN activity at the locular domain and promote it in the pericarp. These findings imply that CLASS-II KNOX genes redundantly coordinate maturation in both dry and fleshy fruits. In tomato, these genes also control spatial patterns of fruit ripening, utilizing differential regulation of RIN activity at different fruit domains.
Subject(s)
Arabidopsis , Solanum lycopersicum , Arabidopsis/genetics , Arabidopsis/metabolism , Ethylenes/metabolism , Fruit/metabolism , Gene Expression Regulation, Plant , Solanum lycopersicum/metabolism , Plant Proteins/genetics , Plant Proteins/metabolism , Transcription Factors/metabolismABSTRACT
The pericarp is the predominant tissue determining the structural characteristics of most fruits. However, the molecular and genetic mechanisms controlling pericarp development remain only partially understood. Previous studies have identified that CLASS-II KNOX genes regulate fruit size, shape, and maturation in Arabidopsis thaliana and Solanum lycopersicum. Here we characterized the roles of the S. lycopersicum CLASS-II KNOX (TKN-II) genes in pericarp development via a detailed histological, anatomical, and karyotypical analysis of TKN-II gene clade mRNA-knockdown (35S:amiR-TKN-II) fruits. We identify that 35S:amiR-TKN-II pericarps contain more cells around their equatorial perimeter and fewer cell layers than the control. In addition, the cell sizes but not the ploidy levels of these pericarps were dramatically reduced. Further, we demonstrate that fruit shape and pericarp layer number phenotypes of the 35S:amiR-TKN-II fruits can be overridden by the procera mutant, known to induce a constitutive response to the plant hormone gibberellin. However, neither the procera mutation nor exogenous gibberellin application can fully rescue the reduced pericarp width and cell size phenotype of 35S:amiR-TKN-II pericarps. Our findings establish that TKN-II genes regulate tomato fruit anatomy, acting via gibberellin to control fruit shape but utilizing a gibberellin-independent pathway to control the size of pericarp cells.
Subject(s)
Gibberellins , Solanum lycopersicum , Gibberellins/metabolism , Fruit/metabolism , Solanum lycopersicum/genetics , Plant Growth Regulators/metabolism , Gene Expression Regulation, Plant , Plant Proteins/genetics , Plant Proteins/metabolismABSTRACT
Grafting of vegetable seedlings is a unique horticultural technology, practiced for more than five decades, aiming to overcome problems associated with intensive cultivation on limited arable land. Grafting can protect vegetables against soil-borne diseases and nematodes; against abiotic stresses such as high or low temperatures, salinity, drought or excessive soil-water content; and against elevated soil concentrations of heavy metals and organic pollutants. Watermelon is one of the most popular vegetables to be grafted, and more than 90% of the plants worldwide are commercially grafted. This mini review aims to summarize the latest available information about the effects of rootstock/scion combinations with respect to enhancing or impairing watermelon fruit-quality. A better understand of the influence of rootstock/scion compatibility or incompatibility on fruit-quality parameters will facilitate decision-making by growers and direct breeding programs to produce high-quality grafted fruits in a cost-effective manner. © 2020 Society of Chemical Industry.
Subject(s)
Citrullus/growth & development , Fruit/chemistry , Plant Breeding , Plant Roots/chemistry , Citrullus/chemistry , Fruit/growth & development , Plant Roots/growth & developmentABSTRACT
Combined quantitative trait loci (QTL) and expression-QTL (eQTL) mapping analysis was performed to identify genetic factors affecting melon (Cucumis melo) fruit quality, by linking genotypic, metabolic and transcriptomic data from a melon recombinant inbred line (RIL) population. RNA sequencing (RNA-Seq) of fruit from 96 RILs yielded a highly saturated collection of >â 58â 000 single-nucleotide polymorphisms, identifying 6636 recombination events that separated the genome into 3663 genomic bins. Bin-based QTL analysis of 79 RILs and 129 fruit-quality traits affecting taste, aroma and color resulted in the mapping of 241 QTL. Thiol acyltransferase (CmThAT1) gene was identified within the QTL interval of its product, S-methyl-thioacetate, a key component of melon fruit aroma. Metabolic activity of CmThAT1-encoded protein was validated in bacteria and in vitro. QTL analysis of flesh color intensity identified a candidate white-flesh gene (CmPPR1), one of two major loci determining fruit flesh color in melon. CmPPR1 encodes a member of the pentatricopeptide protein family, involved in processing of RNA in plastids, where carotenoid and chlorophyll pigments accumulate. Network analysis of >â 12â 000 eQTL mapped for >â 8000 differentially expressed fruit genes supported the role of CmPPR1 in determining the expression level of plastid targeted genes. We highlight the potential of RNA-Seq-based QTL analysis of small to moderate size, advanced RIL populations for precise marker-assisted breeding and gene discovery. We provide the following resources: a RIL population genotyped with a unique set of SNP markers, confined genomic segments that harbor QTL governing 129 traits and a saturated set of melon eQTLs.
Subject(s)
Chromosome Mapping , Cucurbitaceae/genetics , Fruit/genetics , Quantitative Trait Loci/genetics , Cucurbitaceae/metabolism , Food Quality , Fruit/metabolism , Genes, Plant/genetics , Genes, Plant/physiology , Genetic Linkage , Genome-Wide Association Study , Polymorphism, Single Nucleotide/genetics , Sequence Analysis, RNAABSTRACT
KEY MESSAGE: Molecular markers linked to QTLs controlling post-harvest fruit water loss in pepper may be utilized to accelerate breeding for improved shelf life and inhibit over-ripening before harvest. Bell pepper (Capsicum annuum L.) is an important vegetable crop world-wide. However, marketing is limited by the relatively short shelf life of the fruit due to water loss and decay that occur during prolonged storage. Towards breeding pepper with reduced fruit post-harvest water loss (PWL), we studied the genetic, physiological and biochemical basis for natural variation of PWL. We performed quantitative trait locus (QTL) mapping of fruit PWL in multiple generations of an interspecific cross of pepper, which resulted in the identification of two linked QTLs on chromosome 10 that control the trait. We further developed near-isogenic lines (NILs) for characterization of the QTL effects. Transcriptome analysis of the NILs allowed the identification of candidate genes associated with fruit PWL-associated traits such as cuticle biosynthesis, cell wall metabolism and fruit ripening. Significant differences in PWL between the NILs in the immature fruit stage, differentially expressed cuticle-associated genes and differences in the content of specific chemical constituents of the fruit cuticle, indicated a likely influence of cuticle composition on the trait. Reduced PWL in the NILs was associated with delayed over-ripening before harvest, low total soluble solids before storage, and reduced fruit softening after storage. Our study enabled a better understanding of the genetic and biological processes controlling natural variation in fruit PWL in pepper. Furthermore, the genetic materials and molecular markers developed in this study may be utilized to breed peppers with improved shelf life and inhibited over-ripening before harvest.
Subject(s)
Capsicum/genetics , Fruit/physiology , Quantitative Trait Loci , Water/physiology , Capsicum/chemistry , Capsicum/physiology , Chromosome Mapping , Crosses, Genetic , DNA, Plant/genetics , Fruit/chemistry , Genetic Markers , Plant Breeding , Transcriptome , Waxes/chemistryABSTRACT
BACKGROUND: The concept of photo-selective netting using commercial cultivation practices was studied in a tomato (Solanum lycopersicum 'Vedetta') summer cultivation in south Serbia (under high solar radiation 910 W m(-2) , with a photosynthetic photon flux density of 1661 µmol m(-2) s(-1) ), under four different coloured shade-nets (pearl, red, blue and black) with 40% relative shading. The aim of the study was to determine how different environmental control technologies (coloured shade-nets as screen house or plastic-house integrated with coloured shade-nets) could influence plant parameters, production and quality traits in tomato fruits cultivated in south Serbia (Balkan region). RESULTS: The leaf area index (LAI) ranged from 4.6 to 5.8 in open field and plastic tunnels plants (control) with maximum LAI values of 7.9-8.2 in net houses with red colour nets. Shade-grown leaves generally have higher total chlorophyll and carotenoids content than do control leaves. Pericarp thickness was significantly higher tomatoes grown under pearl (7.215.82 µm), red (7099.00 µm) and blue nets (6802.29 µm) compared to other treatments and to control (6202.48 µm). The highest concentration of lycopene was detected in tomatoes grown in plastic houses integrated with red colour nets (64.9 µg g(-1) fresh weight). The plastic house and open field (control) tomato production had a taste index mean value of 1.09-1.10. This is significantly higher than the values determined for the treatments with different coloured shade-nets. CONCLUSION: These results show that red and pearl photo-selective nets create optimal growing conditions for the growth of the plant and produce fruits with thicker pericarp, the highest lycopene content, a satisfactory level of taste index and can be further implemented within protected cultivation practices.
Subject(s)
Agriculture/methods , Carotenoids/metabolism , Fruit , Light , Plant Leaves , Solanum lycopersicum , Taste , Chlorophyll/metabolism , Color , Darkness , Fruit/growth & development , Fruit/metabolism , Humans , Lycopene , Solanum lycopersicum/growth & development , Solanum lycopersicum/metabolism , Photosynthesis , Plant Leaves/growth & development , Plant Leaves/metabolism , Serbia , SunlightABSTRACT
Marketing melons (Cucumis melo) as convenient fresh-cut products is popular nowadays. However, damage inflicted by fresh-cut processing results in fast quality degradation and food safety risks. The life of fresh-cut produce can be extended by a modified atmosphere (MA), either generated in a package by tissue respiration (a passive MA) or injected by gas flushing (an active MA). This work investigated the effect of passive and active MA formed in packages of different perforation levels on the quality of fresh-cut melons of two genetic groups: C. melo var. cantalupensis, characterized by climacteric fruit behavior, and non-climacteric C. melo inodorus. The best product preservation was achieved in passive MA packages: non-perforated for inodorus melons and micro-perforated for cantalupensis ones. The optimal packages allowed for the preservation of both genotypes for 14 days at 6-8 °C. The major factors limiting the shelf life of fresh-cut melons were microbial spoilage, translucency disorder and hypoxic fermentation associated with cantalupensis melons with enhanced ethyl acetate accumulation. Inodorus melons were found to be preferable for fresh-cut processing since they were less prone to fermented off-flavor development.
ABSTRACT
Pepper (Capsicum spp.) fruits are covered by a relatively thick coating of cuticle that limits fruit water loss, a trait previously associated with maintenance of postharvest fruit quality during commercial marketing. To shed light on the chemical-compositional diversity of cuticles in pepper, the fruit cuticles from 50 diverse pepper genotypes from a world collection were screened for both wax and cutin monomer amount and composition. These same genotypes were also screened for fruit water loss rate and this was tested for associations with cuticle composition. Our results revealed an unexpectedly large amount of variation for the fruit cuticle lipids, with a more than 14-fold range for total wax amounts and a more than 16-fold range for cutin monomer amounts between the most extreme accessions. Within the major wax constituents fatty acids varied from 1 to 46%, primary alcohols from 2 to 19%, n-alkanes from 13 to 74% and triterpenoids and sterols from 10 to 77%. Within the cutin monomers, total hexadecanoic acids ranged from 54 to 87%, total octadecanoic acids ranged from 10 to 38% and coumaric acids ranged from 0.2 to 8% of the total. We also observed considerable differences in water loss among the accessions, and unique correlations between water loss and cuticle constituents. The resources described here will be valuable for future studies of the physiological function of fruit cuticle, for the identification of genes and QTLs associated with fruit cuticle synthesis in pepper fruit, and as a starting point for breeding improved fruit quality in pepper.
Subject(s)
Capsicum/chemistry , Fruit/chemistry , Membrane Lipids/chemistry , Water/metabolism , Waxes/chemistry , Alcohols/analysis , Capsicum/genetics , Capsicum/metabolism , Coumaric Acids/analysis , Fatty Acids/analysis , Fruit/genetics , Fruit/metabolism , Genes, Plant/genetics , Genotype , Lipids/chemistry , Palmitic Acid/analysis , Plant Epidermis/chemistry , Plant Epidermis/genetics , Plant Epidermis/metabolism , Plant Structures/chemistry , Plant Structures/genetics , Plant Structures/metabolism , Quantitative Trait Loci/genetics , Species Specificity , Stearic Acids/analysis , Sterols/analysis , Terpenes/analysisABSTRACT
Herein, we report bioderived cross-linkers to create biopolymer-based hydrogels with tunable properties. Nucleosides (inosine and uridine) and ribose (pentose sugar lucking the nitrogenous base) were partially oxidized to yield inosine dialdehyde (IdA), uridine dialdehyde (UdA), and ribose dialdehyde (RdA). The dialdehydes were further used as cross-linkers with polysaccharide chitosan to form hydrogels. Depending on the cross-linker type and concentration, the hydrogels showed tunable rheological, mechanical, and liquid holding properties allowing the preparation of injectable, soft, and moldable hydrogels. Computational modeling and molecular dynamics simulations shed light on hydrogel formation and revealed that, in addition to covalent bonding, noncovalent interactions (π-π stacking, cation-π, and H-bonding) also significantly contributed to the cross-linking process. To demonstrate various application possibilities, the prepared hydrogels were used as a growth platform for plant cells, as injectable inks for layer-by-layer 3D printing applications, and as moldable hydrogels for soft lithography to replicate the microstructure of the plant. These findings suggest that the obtained tunable biocompatible hydrogels have the potential to be good candidates for various biotechnological applications.
Subject(s)
Chitosan , Nucleosides , Biocompatible Materials/chemistry , Hydrogels/chemistry , Ribose , Chitosan/chemistry , UridineABSTRACT
This work addresses the challenge of delivering bioactive molecules by designing biocompatible nanogel particles (NGPs) utilizing rationally modified nature-sourced building blocks: capryl-oligochitosan and oxidized inosine. Capryl substituents endowed the resultant NGPs with membrane-penetration capabilities, while purine-containing inosine allowed H-bond/π-π/π-cation interactions. The prepared NGPs were complexed with carboxyfluorescein-labeled single-stranded oligonucleotide (FAM-oligo) and DsRed-encoding plasmid DNA. The successful delivery of FAM-oligo to the cell cytoplasm of the Nicotiana benthamiana plant was observed. Alexa 555-labeled bovine serum albumin (Alexa 555-BSA) was also efficiently encapsulated and delivered to the plant. In addition to delivering FAM-oligo and Alexa 555-BSA separately, NGPs also successfully co-delivered both biomolecules to the plant. Finally, NGPs successfully encapsulated the drug amphotericin B and reduced its toxicity while maintaining its efficacy. The presented findings suggest that NGPs may become a promising platform for the advanced delivery of bioactive molecules in various applications.
Subject(s)
Nucleosides , Oligosaccharides , Nanogels , Inosine , Serum Albumin, Bovine , Drug Delivery SystemsABSTRACT
This study reports significant steps toward developing anti-biofilm surfaces based on superhydrophobic properties that meet the complex demands of today's food and medical regulations. It presents inverse Pickering emulsions of water in dimethyl carbonate (DMC) stabilized by hydrophobic silica (R202) as a possible food-grade coating formulation and describes its significant passive anti-biofilm properties. The final coatings are formed by applying the emulsions on the target surface, followed by evaporation to form a rough layer. Analysis shows that the final coatings exhibited a Contact Angle (CA) of up to 155° and a Roll-off Angle (RA) lower than 1° on the polypropylene (PP) surface, along with a relatively high light transition. Dissolving polycaprolactone (PCL) into the continuous phase enhanced the average CA and coating uniformity but hindered the anti-biofilm activity and light transmission. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) showed a uniform coating by a "Swiss-cheese" like structure with high nanoscale and microscale roughness. Biofilm experiments confirm the coating's anti-biofilm abilities that led to the reduction in survival rates of S.aureus and E.coli, by 90-95% respectively, compared to uncoated PP surfaces.
Subject(s)
Biofilms , Staphylococcus aureus , Emulsions/chemistry , Hydrophobic and Hydrophilic Interactions , WaterABSTRACT
Herein, we report biocompatible hydrogel for wound healing that was prepared using nature-sourced building blocks. For the first time, OCS was employed as a building macromolecule to form bulk hydrogels along with the nature-sourced nucleoside derivative (inosine dialdehyde, IdA) as the cross-linker. A strong correlation was obtained between the mechanical properties and stability of the prepared hydrogels with a cross-linker concentration. The Cryo-SEM images of IdA/OCS hydrogels showed an interconnected spongy-like porous structure. Alexa 555 labeled bovine serum albumin was incorporated into the hydrogels matrix. The release kinetics studies under physiological conditions indicated that cross-linker concentration could also control the release rate. The potential of hydrogels in wound healing applications was tested in vitro and ex vivo on human skin. Topical application of the hydrogel was excellently tolerated by the skin with no impairment of epidermal viability or irritation, determined by MTT and IL-1α assays, respectively. The hydrogels were used to load and deliver epidermal growth factor (EGF), showing an increase in its ameliorating action, effectively enhancing wound closure inflicted by punch biopsy. Furthermore, BrdU incorporation assay performed in both fibroblast and keratinocyte cells revealed an increased proliferation in hydrogel-treated cells and an enhancement of EGF impact in keratinocytes.
Subject(s)
Epidermal Growth Factor , Nucleosides , Humans , Epidermal Growth Factor/pharmacology , Hydrogels/pharmacology , Hydrogels/chemistry , Wound HealingABSTRACT
To understand the role of fruit cuticle lipid composition in fruit water loss, an advanced backcross population, the BC(2)F(2) , was created between the Capsicum annuum (PI1154) and the Capsicum chinense (USDA162), which have high and low post-harvest water loss rates, respectively. Besides dramatic differences in fruit water loss, preliminary studies also revealed that these parents exhibited significant differences in both the amount and composition of their fruit cuticle. Cuticle analysis of the BC(2)F(2) fruit revealed that although water loss rate was not strongly associated with the total surface wax amount, there were significant correlations between water loss rate and cuticle composition. We found a positive correlation between water loss rate and the amount of total triterpenoid plus sterol compounds, and negative correlations between water loss and the alkane to triterpenoid plus sterol ratio. We also report negative correlations between water loss rate and the proportion of both alkanes and aliphatics to total surface wax amount. For the first time, we report significant correlations between water loss and cutin monomer composition. We found positive associations of water loss rate with the total cutin, total C(16) monomers and 16-dihydroxy hexadecanoic acid. Our results support the hypothesis that simple straight-chain aliphatic cuticle constituents form more impermeable cuticular barriers than more complex isoprenoid-based compounds. These results shed new light on the biochemical basis for cuticle involvement in fruit water loss.
Subject(s)
Capsicum/chemistry , Capsicum/metabolism , Fruit/chemistry , Fruit/metabolism , Membrane Lipids/chemistry , Water/metabolism , Waxes/chemistry , Capsicum/genetics , Chimera , Genetic Variation , Inbreeding , Stress, PhysiologicalABSTRACT
Improved postharvest storage is a major target for pepper-crop production. The three main components of postharvest improvement of pepper fruit are reducing water-loss rate, reducing chilling susceptibility, and increasing resistance to pathogens. To date, a small number of Quantitative Trait Locus (QTL) studies have been reported for reduced water loss and enhanced tolerance to chilling and anthracnose. More effort is needed to screen germplasm collections for accessions with improved postharvest traits. Molecular studies have enabled the identification of candidate genes conferring reduced susceptibility to chilling injury and pathogen infection in pepper fruit, and in related crops such as tomato - which may be implemented in pepper. Manipulation of the activity of these genes by genome editing can improve postharvest pepper quality.
Subject(s)
Fruit , Plant Breeding , Fruit/genetics , Quantitative Trait Loci/genetics , Phenotype , WaterABSTRACT
In this study, oligomers of carboxymethyl cellulose (O-CMC) were used as a new postharvest treatment for fresh produce. The oligomers were prepared by green and cost-effective enzymatic hydrolysis and applied to prevent spoilage and improve storability of fresh-cut strawberries. The produce quality was improved by all formulations containing O-CMC in comparison to the control, as indicated by the decrease in decay incidence, weight loss (min ~2-5 times less), higher firmness, microbial load decrease, better appearance, and sensorial quality of the fruits. Natural resources: ascorbic acid, gallic acid, and vanillin were further added to enhance the beneficial effect. O-CMC with vanillin was most efficient in all of the tested parameters, exhibiting the full prevention of fruit decay during all 7 days of refrigerated storage. In addition, fruits coated with O-CMC vanillin have the smallest weight loss (%), minimum browning, and highest antimicrobial effect preventing bacterial (~3 log, 2 log) and yeast/mold contaminations. Based on the obtained positive results, O-CMC may provide a new, safe, and effective tool for the postharvest treatment of fresh produce that can be used alone or in combination with other active agents.
ABSTRACT
In this work, we present biocompatible nanocarriers based on modified polysaccharides capable of transporting insulin macromolecules through human skin without any auxiliary techniques. N-Alkylamidated carboxymethyl cellulose (CMC) derivatives CMC-6 and CMC-12 were synthesized and characterized using attenuated total reflectance Fourier transform infrared (ATR-FTIR) and nuclear magnetic resonance (NMR) spectroscopy, gel permeation chromatography and thermogravimetric, calorimetric and microscopic techniques. The prepared modified polysaccharides spontaneously assemble into soft nanoaggregates capable of adjusting to both aqueous and lipid environments. Due to this remarkable self-adjustment ability, CMC-6 and CMC-12 were examined for transdermal delivery of insulin. First, a significant increase in the amount of insulin present in lipid media upon encapsulation in CMC-12 was observed in vitro. Then, ex vivo studies on human skin were conducted. Those studies revealed that the CMC-12 carrier led to an enhancement of transdermal insulin delivery, showing a remarkable 85% insulin permeation. Finally, toxicity studies revealed no alteration in epidermal viability upon treatment and the absence of any skin irritation or amplified cytokine release, verifying the safety of the prepared carriers. Three-dimensional (3D) molecular modeling and conformational dynamics of CMC-6 and CMC-12 polymer chains explained their binding capacities and the ability to transport insulin macromolecules. The presented carriers have the potential to become a biocompatible, safe and feasible platform for the design of effective systems for transdermal delivery of bioactive macromolecules in medicine and cosmetics. In addition, transdermal insulin delivery reduces the pain and infection risk in comparison to injections, which may increase the compliance and glycemic control of diabetic patients.
ABSTRACT
Storage at low temperatures is a common practice to prolong postharvest life of fruit and vegetables with a minimal negative impact on human/environmental health. Storage at low temperatures, however, can be restricted due to produce susceptibility to non-freezing chilling temperatures, when injuries such as physiological disorders and decays may result in unmarketable produce. We have investigated tomato fruit response to postharvest chilling stress in a recombinant inbred line (RIL) population developed from a cross between a chilling-sensitive cultivated tomato (Solanum lycopersicum L.) breeding line and a chilling-tolerant inbred accession of the tomato wild species S. pimpinellifolium L. Screening of the fruit of 148 RILs under cold storage (1.5°C) indicated presence of significant variations in chilling tolerance, manifested by varying degrees of fruit injury. Two extremely contrasting groups of RILs were identified, chilling-tolerant and chilling-sensitive RILs. The RILs in the two groups were further investigated under chilling stress conditions, and several physiological parameters, including weight loss, chlorophyll fluorescence parameters Fv/Fm, and Performance Index (PI), were determined to be efficient markers for identifying response to chilling stress in postharvest fruit. The Fv/Fm values reflected the physiological damages endured by the fruit after cold storage, and PI was a sensitive marker for early changes in photosystem II function. These two parameters were early indicators of chilling response before occurrence of visible chilling injuries. Antioxidant activities and ascorbic acid content were significantly higher in the chilling-tolerant than the chilling-sensitive lines. Further, the expression of C-repeat/DREB binding factors (CBFs) genes swiftly changed within 1-hr of fruit exposure to the chilling temperature, and the SlCBF1 transcript level was generally higher in the chilling-tolerant than chilling-sensitive lines after 2-hr exposure to the low temperature. This research demonstrates the presence of potential genetic variation in fruit chilling tolerance in the tomato RIL population. Further investigation of the RIL population is underway to better understand the genetic, physiological, and biochemical mechanisms involved in postharvest fruit chilling tolerance in tomato.
ABSTRACT
Cannabis sativa L. is used to treat a wide variety of medical conditions, in light of its beneficial pharmacological properties of its cannabinoids and terpenes. At present, the quantitative chemical analysis of these active compounds is achieved through the use of laborious, expensive, and time-consuming technologies, such as high-pressure liquid-chromatography- photodiode arrays, mass spectrometer detectors (HPLC-PDA or MS), or gas chromatography-mass spectroscopy (GC-MS). Hence, we aimed to develop a simple, accurate, fast, and cheap technique for the quantification of major cannabinoids and terpenes using Fourier transform near infra-red spectroscopy (FT-NIRS). FT-NIRS was coupled with multivariate classification and regression models, namely partial least square-discriminant analysis (PLS-DA) and partial least squares regression (PLS-R) models. The PLS-DA model yielded an absolute major class separation (high-THC, high-CBD, hybrid, and high-CBG) and perfect class prediction. Using only three latent variables (LVs), the cross-validation and prediction model errors indicated a low probability of over-fitting the data. In addition, the PLS-DA model enabled the classification of chemovars with genetic-chemical similarities. The classification of high-THCA chemovars was more sensitive and more specific than the classifications of the remaining chemovars. The prediction of cannabinoid and terpene concentrations by PLS-R yielded 11 robust models with high predictive capabilities (R2CV and R2pred > 0.8, RPD >2.5 and RPIQ >3, RMSECV/RMSEC ratio <1.2) and additional 15 models whose performance was acceptable for initial screening purposes (R2CV > 0.7 and R2pred < 0.8, RPD >2 and RPIQ <3, 1.2 < RMSECV/RMSEC ratio <2). Our results confirm that there is sufficient information in the FT-NIRS to develop cannabinoid and terpene prediction models and major-cultivar classification models.
ABSTRACT
Quercetin-chitosan (QCS) polysaccharide was synthesized via non-radical reaction using L-valine-quercetin as the precursor. QCS was systematically characterized and demonstrated amphiphilic properties with self-assembling ability. In-vitro activity studies confirmed that quercetin grafting does not diminish but rather increases antimicrobial activity of the original chitosan (CS) and provided the modified polysaccharide with antioxidative properties. QCS applied as a coating on fresh-cut fruit reduced microbial spoilage and oxidative browning of coated melon and apple, respectively. Notably, QCS-based coatings prevented moisture loss, a major problem with fresh produce (2%, 12% and 18% moisture loss for the QCS-coated, CS-coated and uncoated fruit, respectively). The prepared QCS polysaccharide provides advanced bioactivity and does not involve radical reactions during its synthesis, therefore, it has good potential for use as a nature-sourced biocompatible active material for foods and other safety-sensitive applications.
Subject(s)
Chitosan , Cucurbitaceae , Antioxidants/pharmacology , Polysaccharides/pharmacology , Quercetin/pharmacologyABSTRACT
A series of quaternary dimethyl-(alkyl)-ammonium chitosan derivatives (QACs) was synthesized and studied for physicochemical properties and bioactivity. The QACs tended to spontaneously self-assembly into nanoaggregates. Antimicrobial activity was examined in vitro on Gram-negative Escherichia coli (E. coli) and Gram-positive Listeria innocua (L. innocua) bacteria as well as phytopathogenic fungus Botrytis cinerea. The hexyl chain-substituted QAC-6 demonstrated the highest potency causing 3.0- and 4.5-log CFU mL-1 reduction of E. coli and L. innocua, respectively. QAC-6 was tested for antimicrobial activity on stainless steel coupons and fresh spinach leaves. A traditional 'wet' application (spray) and dry Engineered Water Nanostructure (EWNS) approach were used for spinach decontamination. With both approaches, significant reduction of microbial load on the treated produce was achieved. The wet application showed a greater reduction of microbial load, while the advantages of EWNS were reaching the antimicrobial effect with miniscule dose of active agent leaving treated surface visibly dry.