Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 104
Filtrar
1.
Anal Chem ; 96(23): 9561-9569, 2024 Jun 11.
Artículo en Inglés | MEDLINE | ID: mdl-38796775

RESUMEN

Square wave voltammetry (SWV) is commonly used in electroanalytical applications to enhance analyte faradaic signals and minimize nonfaradaic processes. However, little attention is given as to how best use SWV to minimize faradaic interference signals that arise from redox species present in solution that have redox potentials that convolute with that of the analyte. In conventional SWV, a series of current-time (i-t) transients are collected, and i is averaged over a specified window of each transient (potentiostat dependent). This average i is reported against the electrode potential, E. As the i-t response is governed by the type of electron transfer reaction under investigation, we show how by collecting all i-t data and through judicious choice of the current averaging window, it is possible to enhance the analyte response while at the same time reducing the interferent signal. We look at three different electron transfer reactions, fast electron transfer outer sphere, metal electrodeposition/stripping, and surface-confined proton-coupled electron transfer (PCET) and demonstrate different i-t behaviors in SWV, visually aided by the use of 3D i-t-E plots. In the case of PCET quinone-based voltammetric sensing of pH in the presence of a heavy metal (here Cu2+), we show that the use of a much earlier current averaging window (2-10% of the i-t response) results in the pH signal being clearly distinguished from that of the overlapping heavy metal.

2.
Phys Chem Chem Phys ; 25(11): 7832-7846, 2023 Mar 15.
Artículo en Inglés | MEDLINE | ID: mdl-36857676

RESUMEN

A finite-element model has been developed to simulate the cyclic voltammetric (CV) response of a planar electrode for a 1e outer-sphere redox process, which fully accounts for cell electrostatics, including ohmic potential drop, ion migration, and the structure of the potential-dependent electric double layer. Both reversible and quasi-reversible redox reactions are treated. The simulations compute the time-dependent electric potential and ion distributions across the entire cell during a voltammetric scan. In this way, it is possible to obtain the interdependent faradaic and non-faradaic contributions to a CV and rigorously include all effects of the electric potential distribution on the rate of electron transfer and the local concentrations of the redox species Oz and Rz-1. Importantly, we demonstrate that the driving force for electron transfer can be different to the applied potential when electrostatic interactions are included. We also show that the concentrations of Oz and Rz-1 at the plane of electron transfer (PET) significantly depart from those predicted by the Nernst equation, even when the system is characterised by fast electron transfer/diffusion control. A mechanistic rationalisation is also presented as to why the electric double layer has a negligible effect on the CV response of such reversible systems. In contrast, for quasi-reversible electron transfer the concentrations of redox species at the PET are shown to play an important role in determining CV wave shape, an effect also dependant on the charge of the redox species and the formal electrode potential of the redox couple. Failure to consider electrostatic effects could lead to incorrect interpretation of electron-transfer kinetics from the CV response. Simulated CVs at scan rates between 0.1 and 1000 V s-1 are found to be in good agreement with experimental data for the reduction of 1.0 mM Ru(NH3)63+ at a 2 mm diameter gold disk electrode in 1.0 M potassium nitrate.

3.
Anal Chem ; 94(37): 12673-12682, 2022 09 20.
Artículo en Inglés | MEDLINE | ID: mdl-36069703

RESUMEN

The voltammetric response of electrodes coated with a redox-active monolayer is computed by finite element simulations based on a generalized model that couples the Butler-Volmer, Nernst-Planck, and Poisson equations. This model represents the most complete treatment of the voltammetric response of a redox film to date and is made accessible to the experimentalist via the use of finite element modeling and a COMSOL-generated report. The model yields a full description of the electric potential and charge distributions across the monolayer and bulk solution, including the potential distribution associated with ohmic resistance. In this way, it is possible to properly account for electrostatic effects at the molecular film/electrolyte interface, which are present due to the changing charge states of the redox head groups as they undergo electron transfer, under both equilibrium and nonequilibrium conditions. Specifically, our numerical simulations significantly extend previous theoretical predictions by including the effects of finite electron-transfer rates (k0) and electrolyte conductivity. Distortion of the voltammetric wave due to ohmic potential drop is shown to be a function of electrolyte concentration and scan rate, in agreement with experimental observations. The commonly used Laviron analysis for the determination of k0 fails to account for ohmic drop effects, which may be non-negligible at high scan rates. This model provides a more accurate alternative for k0 determination at all scan rates. The electric potential and charge distributions across an electrochemically inactive monolayer and electrolyte solution are also simulated as a function of applied potential and are found to agree with the Gouy-Chapman-Stern theory.


Asunto(s)
Electrólitos , Electrodos , Análisis de Elementos Finitos , Oxidación-Reducción , Electricidad Estática
4.
Anal Chem ; 94(27): 9856-9862, 2022 07 12.
Artículo en Inglés | MEDLINE | ID: mdl-35767370

RESUMEN

Rotating ring disk electrodes (RRDEs) are a powerful and versatile tool for mechanistically investigating electrochemical reactions at electrode surfaces, particularly in the area of electroanalysis and catalysis. Despite their importance, only limited electrode materials (typically glassy carbon, platinum, and gold) and combinations thereof are available commercially. In this work, we present a method employing three-dimensional (3D) printing in conjunction with machined brass components to produce housing, which can accommodate any electrode material in, e.g., pressed powdered pellet, wafer, rod, foil, or vapor deposited onto a conductive substrate form. In this way, the range and usability of RRDEs is extended. This custom do-it-yourself (DIY) approach to fabricating RRDEs also enables RRDEs to be produced at a significant fraction of the cost of commercial RRDEs. To illustrate the versatility of our approach, coplanar boron-doped diamond (BDD) RRDEs are fabricated for the first time using the approach described. Experimental collection efficiencies for the redox couple FcTMA+/FcTMA2+ are found to be very close to those predicted theoretically. BDD electrodes serve as an ideal electrocatalyst support due to their low background currents, wide solvent potential window in aqueous solution, and chemical and electrochemical stability in acid and alkali solutions. The BDD RRDE configuration is employed to investigate the importance of surface-incorporated nondiamond carbon in BDD on hydrogen peroxide generation via the oxygen reduction reaction in acid solutions.


Asunto(s)
Boro , Diamante , Carbono , Electrodos , Oxidación-Reducción
5.
Anal Bioanal Chem ; 413(27): 6777-6791, 2021 Nov.
Artículo en Inglés | MEDLINE | ID: mdl-33961102

RESUMEN

An SU-8 probe with an array of nine, individually addressable gold microband electrodes (100 µm long, 4 µm wide, separated by 4-µm gaps) was photolithographically fabricated and characterized for detection of low concentrations of chemicals in confined spaces and in vivo studies of biological tissues. The probe's shank (6 mm long, 100 µm wide, 100 µm thick) is flexible, but exhibits sufficient sharpness and rigidity to be inserted into soft tissue. Laser micromachining was used to define probe geometry by spatially revealing the underlying sacrificial aluminum layer, which was then etched to free the probes from a silicon wafer. Perfusion with fluorescent nanobeads showed that, like a carbon fiber electrode, the probe produced no noticeable damage when inserted into rat brain, in contrast to damage from an inserted microdialysis probe. The individual addressability of the electrodes allows single and multiple electrode activation. Redox cycling is possible, where adjacent electrodes serve as generators (that oxidize or reduce molecules) and collectors (that do the opposite) to amplify signals of small concentrations without background subtraction. Information about electrochemical mechanisms and kinetics may also be obtained. Detection limits for potassium ferricyanide in potassium chloride electrolyte of 2.19, 1.25, and 2.08 µM and for dopamine in artificial cerebral spinal fluid of 1.94, 1.08, and 5.66 µM for generators alone and for generators and collectors during redox cycling, respectively, were obtained.


Asunto(s)
Dopamina/líquido cefalorraquídeo , Técnicas Electroquímicas/instrumentación , Microelectrodos , Animales , Calibración , Cuerpo Estriado/cirugía , Técnicas Electroquímicas/métodos , Electrólitos/química , Ferricianuros/análisis , Ferricianuros/química , Oro , Rayos Láser , Masculino , Microelectrodos/efectos adversos , Microtecnología , Oxidación-Reducción , Polímeros/química , Cloruro de Potasio/química , Ratas Sprague-Dawley
6.
Phys Chem Chem Phys ; 23(14): 8100-8117, 2021 Apr 14.
Artículo en Inglés | MEDLINE | ID: mdl-33875985

RESUMEN

Students who undertake practical electrochemistry experiments for the first time will come face to face with the potentiostat. To many this is simply a box containing electronics which enables a potential to be applied between a working and reference electrode, and a current to flow between the working and counter electrode, both of which are outputted to the experimentalist. Given the broad generality of electrochemistry across many disciplines it is these days very common for students entering the field to have a minimal background in electronics. This article serves as an introductory tutorial to those with no formalized training in this area. The reader is introduced to the operational amplifier, which is at the heart of the different potentiostatic electronic circuits and its role in enabling a potential to be applied and a current to be measured is explained. Voltage follower op-amp circuits are also highlighted, given their importance in measuring voltages accurately. We also discuss digital to analogue and analogue to digital conversion, the processes by which the electrochemical cell receives input signals and outputs data and data filtering. By reading the article, it is intended the reader will also gain a greater confidence in problem solving issues that arise with electrochemical cells, for example electrical noise, uncompensated resistance, reaching compliance voltage, signal digitisation and data interpretation. We also include trouble shooting tables that build on the information presented and can be used when undertaking practical electrochemistry.

7.
Anal Chem ; 92(24): 16072-16078, 2020 12 15.
Artículo en Inglés | MEDLINE | ID: mdl-33196163

RESUMEN

This work demonstrates the use of an sp2-bonded carbon microspot boron doped diamond (BDD) electrode for voltammetric measurement of both pH and analyte concentration in a pH-dependent speciation process. In particular, the electrode was employed for the voltammetric detection of pH and hypochlorite (OCl-) in unbuffered, aerated solutions over the pH range 4-10. Knowledge of both pH and [OCl-] is essential for determination of free chlorine concentration. The whole surface of the microspot BDD electrode was found active toward the voltammetric oxidation of OCl-, with OCl- showing a characteristic response at +1.5 V vs SCE. In contrast, it was only the surface integrated quinones (Q) in sp2-bonded carbon regions of the BDD electrode that were responsible for the voltammetric pH signal. A Nernstian response for pH (gradient = 63 ± 1 mV pH-1) was determined from proton coupled electron transfer at the BDD-Q electrode, over the potential range -0.4-0.5 V vs SCE. By measuring both OCl- and pH voltammetrically, over the pH range 4-10, the OCl- oxidative current was found to correlate extremely well with the predicted pH-dependent [OCl-] speciation profile.

8.
Chem Soc Rev ; 48(1): 157-204, 2019 Jan 02.
Artículo en Inglés | MEDLINE | ID: mdl-30444227

RESUMEN

Conductive diamond possesses unique features as compared to other solid electrodes, such as a wide electrochemical potential window, a low and stable background current, relatively rapid rates of electron-transfer for soluble redox systems without conventional pretreatment, long-term responses, stability, biocompatibility, and a rich surface chemistry. Conductive diamond microcrystalline and nanocrystalline films, structures and particles have been prepared using a variety of approaches. Given these highly desirable attributes, conductive diamond has found extensive use as an enabling electrode across a variety of fields encompassing chemical and biochemical sensing, environmental degradation, electrosynthesis, electrocatalysis, and energy storage and conversion. This review provides an overview of the fundamental properties and highlights recent progress and achievements in the growth of boron-doped (metal-like) and nitrogen and phosphorus-doped (semi-conducting) diamond and hydrogen-terminated undoped diamond electrodes. Applications in electroanalysis, environmental degradation, electrosynthesis electrocatalysis, and electrochemical energy storage are also discussed. Diamond electrochemical devices utilizing micro-scale, ultramicro-scale, and nano-scale electrodes as well as their counterpart arrays are viewed. The challenges and future research directions of conductive diamond are discussed and outlined. This review will be important and informative for chemists, biochemists, physicists, materials scientists, and engineers engaged in the use of these novel forms of carbon.

9.
J Am Chem Soc ; 141(2): 1035-1044, 2019 01 16.
Artículo en Inglés | MEDLINE | ID: mdl-30525559

RESUMEN

While quinone proton coupled electron transfer (PCET) under buffered conditions is well understood, the situation is more complicated in unbuffered aqueous solutions. With a view to producing a quinone-based voltammetric pH electrode that can function universally in both buffered and unbuffered solutions by following a two-electron (2e-)/two-proton (2H+) Nernstian pathway over a wide pH range, the voltammetric response of strongly electronically coupled surface-bound quinones, directly integrated into a boron-doped diamond (BDD) electrode, is investigated. A laser ablation process enables integration of quinones into the BDD electrode surface with a high p Ka1 (first protonation state) and with controllable, very low surface coverages (as low as 2 orders of magnitude below monolayer coverage). Under buffered conditions, one wave results for all pH values, and the 2e-/2H+ pathway is followed across the entire pH range. The measured ET rate constant values, from Laviron analysis, are also high, indicative of fast ET pathways. Under unbuffered conditions, one wave is again observed for all pH values; however, deviations from the buffered 2e-/2H+ behavior are seen in the neutral region (pH 6-8). While 2e-/2H+ transfer is maintained at all times, we attribute the observed deviation to local pH changes caused by the consumption and generation of protons at the electrode surface during the redox electrochemistry of the quinone. The associated proton fluxes generated at such sparse surface coverages are thought to be sufficiently high enough to prevent ET from occurring exclusively via a proton-independent route. By reducing surface coverage (down to ∼4 × 10-12 mol cm-2; the limit of our laser ablation process) local pH changes can be reduced but are not eradicated completely. By moving to a pulsed voltammetric technique, where for each potential step protons consumed at the electrode are immediately replaced, it is possible, provided the surface coverage is low enough, to obtain a Nernstian 2e-/2H+ response across a wide pH range in unbuffered solution.

10.
Anal Chem ; 91(12): 7935-7942, 2019 Jun 18.
Artículo en Inglés | MEDLINE | ID: mdl-31083924

RESUMEN

Square wave voltammetry (SWV) is most commonly used to enhance electroanalytical current signals of a redox analyte of interest. The SWV is typically recorded in a potential region where both non-faradaic and faradaic currents are collected; however, only data in the faradaic region are analyzed. In this article, we show how by collecting the full current-time ( i- t) data, arising from the SWV potential pulse sequence, and analyzing in the region of the potential scan where non-faradaic currents arise, further analytical information can be collected, over short time periods (typically seconds). Importantly, we show how information on solution resistance, R (and solution conductivity), and double layer capacitance, C, can be extracted from this data, without the need to conduct further electrochemical experiments, such as electrochemical impedance spectroscopy or independent solution conductivity measurements. Knowledge of the latter is important for measurements in real world samples, where the electrolyte concentration is unknown. We show how SWV measurements of electrode capacitance with repeat SWV scans can also be used to determine whether a changing faradaic SWV signal is due to electrode fouling or changing analyte concentration. Finally, knowledge of both parameters ( RC) is essential for optimization of the SWV parameters, such that the faradaic SWV signal is truly free from non-faradaic contributions.

11.
Analyst ; 144(23): 6834-6849, 2019 Nov 18.
Artículo en Inglés | MEDLINE | ID: mdl-31657380

RESUMEN

Anodic Stripping Voltammetry (ASV) has the capability to detect heavy metals at sub ppb-level with portable and cheap instrumentation making it ideal for in the field (at the source) analysis, however, commercial activity is surprisingly limited. The more commonly used liquid mercury electrodes are now obsolete due to toxicity concerns, and replacements are all based around solid electrodes, which come with their own challenges. This tutorial review aims to discuss the experimental practicalities of ASV, providing a clear overview of the issues for consideration, which can serve as a guide for anyone wanting to undertake analytical ASV. Choice of electrode material (with or without subsequent modification) and solution composition (pH, electrolyte, buffer) are important parameters, as well as an understanding of pH dependent metal speciation and possible intermetallic effects. Measurements made on model solutions often differ from those made on environmental samples with the latter containing organic matter, biological and inorganic species, which themselves can adsorb metal ions. Consideration should also be given to the method of solution collection and the sample container utilised. ASV can be a powerful tool to an analytical chemist, however optimisation for the application of interest is essential, which this review aims to help guide.

12.
Anal Chem ; 89(5): 2830-2837, 2017 03 07.
Artículo en Inglés | MEDLINE | ID: mdl-28192945

RESUMEN

Quantitative studies of electron transfer processes at electrode/electrolyte interfaces, originally developed for homogeneous liquid mercury or metallic electrodes, are difficult to adapt to the spatially heterogeneous nanostructured electrode materials that are now commonly used in modern electrochemistry. In this study, the impact of surface heterogeneity on Fourier-transformed alternating current voltammetry (FTACV) has been investigated theoretically under the simplest possible conditions where no overlap of diffusion layers occurs and where numerical simulations based on a 1D diffusion model are sufficient to describe the mass transport problem. Experimental data that meet these requirements can be obtained with the aqueous [Ru(NH3)6]3+/2+ redox process at a dual-electrode system comprised of electrically coupled but well-separated glassy carbon (GC) and boron-doped diamond (BDD) electrodes. Simulated and experimental FTACV data obtained with this electrode configuration, and where distinctly different heterogeneous charge transfer rate constants (k0 values) apply at the individual GC and BDD electrode surfaces, are in excellent agreement. Principally, because of the far greater dependence of the AC current magnitude on k0, it is straightforward with the FTACV method to resolve electrochemical heterogeneities that are ∼1-2 orders of magnitude apart, as applies in the [Ru(NH3)6]3+/2+ dual-electrode configuration experiments, without prior knowledge of the individual kinetic parameters (k01 and k02) or the electrode size ratio (θ1:θ2). In direct current voltammetry, a difference in k0 of >3 orders of magnitude is required to make this distinction.

13.
Phys Chem Chem Phys ; 19(13): 8726-8734, 2017 Mar 29.
Artículo en Inglés | MEDLINE | ID: mdl-28317963

RESUMEN

Heterogeneous electron transfer (ET) processes at electrode/electrolyte interfaces are of fundamental and applied importance and are extensively studied by a range of electrochemical techniques, all of which have various attributes but also limitations. The present study focuses on the one-electron oxidation of tetrathiafulvalene (TTF) and reduction of tetracyanoquinodimethane (TCNQ) in acetonitrile solution by two powerful electrochemical techniques: Fourier-transformed large amplitude alternating current voltammetry (FTACV); and scanning electrochemical microscopy (SECM), both of which are supported by detailed theoretical models. At conventional Pt, Au and glassy carbon (GC) electrode materials, the apparent (overall) charge transfer kinetic values determined by FTACV give standard ET rate constants, k, that are fast and close to the reversible limit. They are in good agreement with highly localised k measurements determined by SECM under conditions of high mass transport rates. In contrast, the impact of both the complex heterogeneous surface of polycrystalline boron doped diamond (pBDD) and degenerate p-type doping results in a range of k values across the electrode surface compared to the overall k measured for both processes studied. Moreover, the reduced availability of charge carriers at the electrode surface, at each energy state, compared to a metal, which decreases as the potential becomes more negative, results in lower k0 values at pBDD than Pt, Au and GC. The measurement technique also has an influence: SECM measurements are made at much higher local current density than FTACV, and for TCNQ/TCNQ˙-, which has the more negative formal potential, limited charge carrier availability results in k > k, with unusual apparent charge transfer coefficients and voltammetric waveshapes from SECM. These data thus highlight the importance of understanding the influence of the measurement technique and further demonstrate how ET kinetics at pBDD differ from conventional electrodes, in this case for processes in an organic solvent, which has received much less attention compared to aqueous systems for studies with pBDD.

14.
Anal Chem ; 88(6): 3272-80, 2016 Mar 15.
Artículo en Inglés | MEDLINE | ID: mdl-26877069

RESUMEN

Scanning electrochemical microscopy (SECM) is a powerful tool that enables quantitative measurements of fast electron transfer (ET) kinetics when coupled with modeling predictions from finite-element simulations. However, the advent of nanoscale and nanogap electrode geometries that have an intrinsically high surface area-to-solution volume ratio realizes the need for more rigorous data analysis procedures, as surface effects such as adsorption may play an important role. The oxidation of ferrocenylmethyl trimethylammonium (FcTMA(+)) at highly oriented pyrolytic graphite (HOPG) is used as a model system to demonstrate the effects of reversible reactant adsorption on the SECM response. Furthermore, the adsorption of FcTMA(2+) species onto glass, which is often used to encapsulate ultramicroelectrodes employed in SECM, is also found to be important and affects the voltammetric tip response in a nanogap geometry. If a researcher is unaware of such effects (which may not be readily apparent in slow to moderate scan voltammetry) and analyzes SECM data assuming simple ET kinetics at the substrate and an inert insulator support around the tip, the result is the incorrect assignment of tip-substrate heights, kinetics, and thermodynamic parameters. Thus, SECM kinetic measurements, particularly in a nanogap configuration where the ET kinetics are often very fast (only just distinguishable from reversible), require that such effects are fully characterized. This is possible by expanding the number of experimental variables, including the voltammetric scan rate and concentration of redox species, among others.

15.
Anal Chem ; 88(1): 974-80, 2016 Jan 05.
Artículo en Inglés | MEDLINE | ID: mdl-26638677

RESUMEN

The development of a voltammetric boron doped diamond (BDD) pH sensor is described. To obtain pH sensitivity, laser micromachining (ablation) is utilized to introduce controlled regions of sp(2) carbon into a high quality polycrystalline BDD electrode. The resulting sp(2) carbon is activated to produce electrochemically reducible quinone groups using a high temperature acid treatment, followed by anodic polarization. Once activated, no further treatment is required. The quinone groups show a linear (R(2) = 0.999) and Nernstian (59 mV/(pH unit)) pH-dependent reductive current-voltage response over a large analyzable pH range, from pH 2 to pH 12. Using the laser approach, it is possible to optimize sp(2) coverage on the BDD surface, such that a measurable pH response is recorded, while minimizing background currents arising from oxygen reduction reactions on sp(2) carbon in the potential region of interest. This enables the sensor to be used in aerated solutions, boding well for in situ analysis. The voltammetric response of the electrode is not compromised by the presence of excess metal ions such as Pb(2+), Cd(2+), Cu(2+), and Zn(2+). Furthermore, the pH sensor is stable over a 3 month period (the current time period of testing), can be stored in air between measurements, requires no reactivation of the surface between measurements, and can be reproducibly fabricated using the proposed approach. The efficacy of this pH sensor in a real-world sample is demonstrated with pH measurements in U.K. seawater.

16.
Analyst ; 141(11): 3349-57, 2016 Jun 07.
Artículo en Inglés | MEDLINE | ID: mdl-27118639

RESUMEN

The application of electrochemical X-ray fluorescence (EC-XRF), for the detection of palladium (Pd) contamination in a range of solutions containing electrochemically active compounds, present in excess and relevant to the pharmaceutical and food industries, is reported. In EC-XRF, EC is used to electrochemically pre-concentrate metal on an electrode under forced convection conditions, whilst XRF is employed to spectroscopically quantify the amount of metal deposited, which quantitatively correlates with the original metal concentration in solution. Boron doped diamond is used as the electrode due to its very wide cathodic window and the fact that B and C are non-interfering elements for XRF analysis. The effect of several parameters on the Pd XRF signal intensity are explored including: deposition potential (Edep), deposition time (tdep) and Pd(2+) concentration, [Pd(2+)]. Under high deposition potentials (Edep = -1.5 V), the Pd XRF peak intensity varies linearly with both tdep and [Pd(2+)]. Quantification of [Pd(2+)] is demonstrated in the presence of excess acetaminophen (ACM), l-ascorbic acid, caffeine and riboflavin. We show the same Pd XRF signal intensity (for [Pd(2+)] = 1.1 µM and tdep = 325 s) is observed, i.e. same amount of Pd is deposited on the electrode surface, irrespective of whether these redox active molecules are present or absent. For tdep = 900 s we report a limit of detection for [Pd(2+)] of 3.6 ppb (34 nM). Even lower LODs are possible by increasing tdep or by optimising the X-ray source specifically for Pd. The work presented for Pd detection in the presence of ACM, achieves the required detection sensitivity stipulated by international pharmacopeia guidelines.

17.
Anal Chem ; 87(9): 4933-40, 2015.
Artículo en Inglés | MEDLINE | ID: mdl-25860820

RESUMEN

The development and application of a new methodology, in situ electrochemical X-ray fluorescence (EC-XRF), is described that enables direct identification and quantification of heavy metals in solution. A freestanding film of boron-doped diamond serves as both an X-ray window and the electrode material. The electrode is biased at a suitable driving potential to electroplate metals from solution onto the electrode surface. Simultaneously, X-rays that pass through the back side of the electrode interrogate the time-dependent electrodeposition process by virtue of the XRF signals, which are unique to each metal. In this way it is possible to unambiguously identify which metals are in solution and relate the XRF signal intensity to a concentration of metal species in solution. To increase detection sensitivity and reduce detection times, solution is flown over the electrode surface by use of a wall-jet configuration. Initial studies focused on the in situ detection of Pb(2+), where concentration detection limits of 99 nM were established in this proof-of-concept study (although significantly lower values are anticipated with system refinement). This is more than 3 orders of magnitude lower than that achievable by XRF alone in a flowing solution (0.68 mM). In situ EC-XRF measurements were also carried out on a multimetal solution containing Hg(2+), Pb(2+), Cu(2+), Ni(2+), Zn(2+), and Fe(3+) (all at 10 µM concentration). Identification of five of these metals was possible in one simple measurement. In contrast, while anodic stripping voltammetry (ASV) also revealed five peaks, peak identification was not straightforward, requiring further experiments and prior knowledge of the metals in solution. Time-dependent EC-XRF nucleation data for the five metals, recorded simultaneously, demonstrated similar deposition rates. Studies are now underway to lower detection limits and provide a quantitative understanding of EC-XRF responses in real, multimetal solutions. Finally, the production of custom-designed portable in situ EC-XRF instrumentation will make heavy metal analysis at the source a very realistic possibility.


Asunto(s)
Técnicas Electroquímicas/métodos , Metales Pesados/análisis , Espectrometría por Rayos X/métodos , Técnicas Electroquímicas/instrumentación , Soluciones , Espectrometría por Rayos X/instrumentación
18.
Anal Chem ; 87(19): 10064-71, 2015 Oct 06.
Artículo en Inglés | MEDLINE | ID: mdl-26302058

RESUMEN

The quantification of genotoxic impurities (GIs) such as hydrazine (HZ) is of critical importance in the pharmaceutical industry in order to uphold drug safety. HZ is a particularly intractable GI and its detection represents a significant technical challenge. Here, we present, for the first time, the use of electrochemical analysis to achieve the required detection limits by the pharmaceutical industry for the detection of HZ in the presence of a large excess of a common active pharmaceutical ingredient (API), acetaminophen (ACM) which itself is redox active, typical of many APIs. A flow injection analysis approach with electrochemical detection (FIA-EC) is utilized, in conjunction with a coplanar boron doped diamond (BDD) microband electrode, insulated in an insulating diamond platform for durability and integrated into a two piece flow cell. In order to separate the electrochemical signature for HZ such that it is not obscured by that of the ACM (present in excess), the BDD electrode is functionalized with Pt nanoparticles (NPs) to significantly shift the half wave potential for HZ oxidation to less positive potentials. Microstereolithography was used to fabricate flow cells with defined hydrodynamics which minimize dispersion of the analyte and optimize detection sensitivity. Importantly, the Pt NPs were shown to be stable under flow, and a limit of detection of 64.5 nM or 0.274 ppm for HZ with respect to the ACM, present in excess, was achieved. This represents the first electrochemical approach which surpasses the required detection limits set by the pharmaceutical industry for HZ detection in the presence of an API and paves the wave for online analysis and application to other GI and API systems.


Asunto(s)
Acetaminofén/análisis , Analgésicos no Narcóticos/análisis , Técnicas Electroquímicas/instrumentación , Análisis de Inyección de Flujo/instrumentación , Hidrazinas/análisis , Diseño de Equipo , Humanos , Límite de Detección
19.
Phys Chem Chem Phys ; 17(5): 2935-49, 2015 Feb 07.
Artículo en Inglés | MEDLINE | ID: mdl-25518988

RESUMEN

Conducting, boron doped diamond (BDD), in addition to its superior material properties, offers several notable attributes to the electrochemist making it an intriguing material for electrochemical research. These include the widest solvent window of all electrode materials; low background and capacitive currents; reduced fouling compared to other electrodes and; the ability to withstand extreme potentials, corrosive and high temperature/pressure environments. However, BDD is not your typical electrode material, it is a semi-conductor doped degenerately with boron to present semi-metallic characteristics. Input from materials scientists, chemists and physicists has been required to aid understanding of how to work with this material from an electrochemical viewpoint and improve electrode quality. Importantly, depending on how the BDD has been grown and then subsequently treated, prior to electrochemical measurement, the resulting material properties can vary quite significantly from one electrode to the next. This likely explains the variability seen by different researchers working on the same experimental systems. The aim of this "protocols" article is not to provide a state-of-the-art review of diamond electrochemistry, suitable references are provided to the interested reader, but instead serves as a reference point for any researcher wishing to commence work with diamond electrodes and interpret electrochemical data. It provides information on how best to characterise the material properties of the electrode before use and outlines the interplay between boron dopant density, non-diamond-carbon content, grain morphology, surface chemistry and redox couple identity. All should ideally be considered when interpretating electrochemical data arising from the diamond electrode. This will aid the reader in making meaningful comparisons between data obtained by different researchers using different diamond electrodes. The guide also aims to help educate the researcher in choosing which form of BDD is best suited to their research application.

20.
Phys Chem Chem Phys ; 17(39): 26394-402, 2015 Oct 21.
Artículo en Inglés | MEDLINE | ID: mdl-26388328

RESUMEN

Voltammetric studies of dopamine (DA) oxidation on pristine and acid-treated single-walled carbon nanotube (SWNT) network electrodes were undertaken in order to investigate both the effect of network density and acid treatment times on the voltammetric characteristics for DA oxidation and the susceptibility of the electrodes to fouling. Through careful control of catalysed chemical vapour deposition growth parameters, multiply interconnected and randomly oriented SWNT networks of two significantly different densities were grown (high density, HD, coverage ≫10 µm length of SWNT per µm(-2) and low density, LD, coverage = 5 (±1) µmSWNTµm(-2)). Acid treatment was performed to provide materials with different electrochemical properties and SWNT coverage, as determined by field emission-scanning electron microscopy, atomic force microscopy and micro-Raman spectroscopy. A high concentration of DA (100 µM) was deliberately employed to accelerate the fouling phenomenon associated with DA oxidation in order to evaluate the lifetime of the electrodes. HD pristine SWNT networks were found to promote more facile electron transfer (ET) and were less susceptible to blocking, compared to LD pristine SWNT networks. Acid treatment resulted in both a further enhancement of the ET rate and a reduction in susceptibility towards electrode fouling. However, lengthy acid treatment detrimentally affected ET, due to a decrease in network density and significant damage to the SWNT network structure. These studies highlight the subtle interplay between SWNT coverage and degree of acid functionalisation when seeking to achieve the optimal SWNT electrode for the voltammetric detection of DA.


Asunto(s)
Dopamina/análisis , Técnicas Electroquímicas/instrumentación , Nanotubos de Carbono/química , Neurotransmisores/análisis , Electrodos , Diseño de Equipo , Nanotubos de Carbono/ultraestructura , Oxidación-Reducción
SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA