RESUMEN
A bias control approach is an automatic lock working point algorithm based on variational mode decomposition (VMD) and lock-in amplification (LIA) demodulation for a lithium niobate polarization controller (LNPC). Commonly, the dither voltage applied to the LNPC is much smaller than the bias voltage to avoid the influence of the dither signal on the output light, which reduces the polarization control accuracy of the LNPC. In this paper, we use VMD and LIA, with which the polarization control accuracy of LNPC can be improved, to extract and amplify the dither signal to compensate the drift half-wave of LNPC. The light intensity fluctuations of the output polarized light in vertical or horizontal directions are less than 0.017%.
RESUMEN
The scratches on the fiber end face can enhance the local electrical field, which lowers the damage threshold. The damage mechanism of a high-energy laser is investigated. The effect of scratches on the electric field is simulated by the finite difference time domain (FDTD) solution. The results show that the depth of the scratch has a greater ability to influence the electric field than the width, and multiple scratches have a stronger modulation than a single scratch. In calculation, the damage threshold of the scratch-free end face is 0.456J/c m 2 when the incident light electric field intensity is 50M V/c m, compared to 0.345J/c m 2 in the presence of the scratch on the end face.
RESUMEN
We develop a simple model for assessing risk of airborne disease transmission that accounts for non-uniform mixing in indoor spaces and is compatible with existing epidemiological models. A database containing 174 high-resolution simulations of airflow in classrooms, lecture halls, and buses is generated and used to quantify the spatial distribution of expiratory droplet nuclei for a wide range of ventilation rates, exposure times, and room configurations. Imperfect mixing due to obstructions, buoyancy, and turbulent dispersion results in concentration fields with significant variance. The spatial non-uniformity is found to be accurately described by a shifted lognormal distribution. A well-mixed mass balance model is used to predict the mean, and the standard deviation is parameterized based on ventilation rate and room geometry. When employed in a dose-response function risk model, infection probability can be estimated considering spatial heterogeneity that contributes to both short- and long-range transmission.
Asunto(s)
Contaminación del Aire Interior , Ventilación , Modelos EstadísticosRESUMEN
An anisotropic plasmonic sheet-core-satellite (PSCS) superstructure can be controlled via competitive binding between aptamer/MC-LR conjugation and aptamer-ssDNA hybridization. SERS nanotags can be incorporated into anisotropic plasmonic sheet-cores, e.g., pGO/nanorods, or pGO/hollow AgCl : Au nanoplates so as to fabricate an aptasensor for "ON-OFF" detection of MC-LR toxin. Preparing a PSCS superstructure and detection of toxin can be simultaneously completed so as to simplify the detection procedure of MC-LR toxin. Detection sensitivity of MC-LR toxin can be optimized by controlling aspect ratios or hollow interiors of plasmonic core nanoparticles. Herein, a limit of detection (0.635 pM) with a wide linear range from 1 pM to 10 nM can be obtained via optimized PSCS of pGO/nanorod/dotnanotags. When the aptasensor was tested in real samples, the PSCS shows excellent recoveries from 96.6% to 104.5% with relative standard deviation (RSD) lower than 2.89% in spiked reservoir samples. It can be predicted that a one-step facile nanofabrication/aptasensing approach would be extensively applied for rapid detection of some other environmental contaminants.
Asunto(s)
Aptámeros de Nucleótidos , Técnicas Biosensibles , Límite de Detección , Toxinas Marinas , MicrocistinasRESUMEN
A two-photon 3D printed polymer magnetic sensing device based on a Mach-Zehnder interferometer (MZI) is proposed. One arm of the MZI contains a hollow cavity and two connecting open channels that can be filled with magnetic fluids (MFs) and sealed by the UV curable adhesive, forming a magneto-optical component of the interferometer. As the magnetic field changes, the refractive index (RI) of the MF changes, and the effective RI of the guiding mode of the waveguide changes accordingly, which results in a change in the phase of the MZI. The interferometric spectra can be used to evaluate the sensing sensitivity. The MZI structure with a hollow length of 40 µm is fabricated, and the microstructure is encapsulated with MF, demonstrating a highly sensitive magnetic field device. The experimental results show that the magnetic field sensitivity of the fabricated magnetic field device is -1.675nm/Oe. For a spectrometer with a resolution of 1 pm, the minimal detectable magnetic field resolution of the sensor is up to 59.7 nT with good stability.
RESUMEN
Marine algae are regarded as a promising nutrients resource in future as they can be sustainably cultured without land and high investment. These macroalgae are now widely processed into food and beverages, fertilizers and animal feed. Furthermore, bioactive compounds such as polysaccharides and polyphenols in seaweeds have proven to have antibacterial, antiviral and antifungal properties that can be utilized in cosmeceuticals, nutraceuticals and pharmaceuticals. As a key procedure in seaweed production, the postharvest process not only requires more laboured and energy but also affect the quality of the final product significantly. This article reviewed all current postharvest processes and technologies of seaweed and addressed potential postharvest strategies for seaweed production. © 2021 Society of Chemical Industry.
Asunto(s)
Extractos Vegetales/química , Algas Marinas/química , Animales , Cosmecéuticos/química , Suplementos Dietéticos/análisis , Manipulación de Alimentos , Humanos , Polifenoles/análisis , Polisacáridos/análisisRESUMEN
Awareness towards utilizing food-processing by-products are increasing in health as well as environmental purview. Coffee silver skin (CSS), potato peel (PP) and brewer's spent grain (BSG) are voluminous by-products in their respective processing industries. The present study compared these three by-products for their prospective utilization in producing polyphenols-rich aqueous extracts by using ultrasound-assisted extractions (UAE). A probe-type sonicator was used for ultrasound treatments. The total phenolic contents in the extracts were assessed by Folin-Ciocalteu assay, while the phenolic profiles of the extract was characterized by LC-Q-TOF mass spectrometry. The microstructure of the samples after UAE was evaluated by scanning electron microscopy (SEM). Ultrasound treatment enhanced the rate of extraction and recovered 2.79, 2.12 and 0.66 mg gallic acid equivalents/g of TPC from CSS, PP and BSG, respectively in 30 min, which correspond to recoveries of 97.6%, 84.5% and 84.6%, respectively, compared to conventional solid-liquid extractions carried out for 24 h. The extraction yield was dependent on the particle size of the raw materials and the highest yield was obtained from the materials with 100-250 µm particle size. The SEM imaging revealed that ultrasound treatment caused prominent tissue damage. Extracts contained mainly hydroxycinnamic acid derivatives of phenolic acids. PP and CSS had the highest amounts of umami free amino acids (0.13 mg/g in each), while BSG contained the highest amount of essential amino acids (92 mg/g). The present work shows that CSS, PP and BSG are good sources of polyphenols and UAE can be employed to enhance the extraction efficiency as means of a green approach.
RESUMEN
With the growing consumer demands for greener alternatives that do not involve toxic chemicals as well as the industry concerns of sustainable, nontoxic routes of extraction, the applications of novel extraction technologies in the food industry have been widely studied. This review discussed the novel extraction technologies including their mechanisms, protocols, influencing factors, advantages and drawbacks, as well as a comprehensive summary of the combination of the novel extraction technologies for phyto-bioactive compounds. Novel extraction methods, including ultrasound-assisted extraction (UAE), microwave-assisted extraction (MAE) and enzyme-assisted extraction (EAE), are considered as clean, green and efficient alternative to conventional extraction technologies. Their combinations, ultrasound-assisted enzymatic extraction (UAEE), microwave-assisted enzymatic extraction (MAEE) and ultrasonic microwave-assisted extraction (UMAE), can exhibit higher potential extraction ability. However, some of them need specific equipment. The food industry in the extraction sector should choose a proper extraction method which has a balance between product quality, process efficiency, production costs and environmentally friendly processes. The current review presented comprehensive references for future research on the novel extraction of phyto-bioactive compounds extraction.HighlightsNovel clean, green and efficient alternative to conventional extraction technologies are discussed.Combination of the novel extraction technologies for synergistic effects.Minimal degradation and enhanced extraction yields.Extraction mechanisms, advantages and drawbacks associated with novel extraction technologies.
Asunto(s)
Análisis de los Alimentos/métodos , Industria de Alimentos/tendencias , Microondas , UltrasonidoRESUMEN
Apple pomace has been considered as a sustainable source for antioxidant phenolic compounds. Previous reports show extraction of total phenolic contents (TPC) by following various conventional and non-conventional techniques; however, a comparative study has not been reported. In the present work, conventional extraction was compared with several non-conventional extraction methods including ultrasound-assisted extraction (UAE), microwave-assisted extraction (MAE), high-speed homogenization (HH). Moreover, efficacy of combined treatments, including high-speed homogenization coupled with MAE and ultrasound-assisted enzymatic extraction (UAEE) was evaluated for the recovery of TPC. The results revealed that UAEE results in the highest TPC (4.62 mg GAE/g), moreover, it simultaneously enabled the recovery of low methoxy pectins with the degree of methylation ranging from 14.03- 28.85%. The LC-Q-Tof analysis revealed the presence of various phenolic acids and flavonoids. The DPPH radical scavenging assay showed that the phenolic rich extracts had IC50 values ranging from 27.1 to 54.6, depending on the extraction parameters. This article is protected by copyright. All rights reserved.
RESUMEN
BACKGROUND: This study investigated the effect of blanching (60, 70 and 80 °C for 1, 3, 5 and 10 min) combined with oven drying at 60 °C on the phenolic compounds, antioxidant activity, colour and drying characteristics (drying time, drying rate constant, effective moisture diffusivity and activation energy) of onion slices. RESULTS: Blanching of onion slices at 60 °C for 3 min and at 70 °C for 1 min prior to drying increased their bioactive compounds and antioxidant activity compared to the control samples and other treatments. Eighteen drying models were evaluated. The Modified Page and two-term exponential models best represented the drying data. The effective diffusivity ranged from 3.32 × 10-11 m2 s-1 (control) to 5.27 × 10-11 m2 s-1 , 5.01 × 10-11 m2 s-1 , and 4.74 × 10-11 m2 s-1 for onions blanched at 60 °C, 70 °C and 80 °C, respectively. The higher activation energy was observed for the control (unblanched) sample and slightly lower values were found for 1 min- and 3 min-blanched samples, confirming the higher drying efficiency as a result of the blanching pre-treatment. CONCLUSION: The use of blanching as a pre-treatment before drying of onions resulted in enhanced phytochemical content and drying efficiency. © 2017 Society of Chemical Industry.
Asunto(s)
Desecación/métodos , Manipulación de Alimentos/métodos , Cebollas/química , Fitoquímicos/análisis , Antioxidantes/análisis , Color , Difusión , Calor , Fenoles/análisis , TermodinámicaRESUMEN
Moisture sorption isotherm is commonly determined by saturated salt slurry method, which has defects of long time cost, cumbersome labor, and microbial deterioration of samples. Thus, a novel method, aw measurement (AWM) method, has been developed to overcome these drawbacks. Fundamentals and applications of this fast method have been introduced with respects to its typical operational steps, a variety of equipment set-ups and applied samples. The resultant rapidness and reliability have been evaluated by comparing with conventional methods. This review also discussed factors impairing measurement precision and accuracy, including inappropriate choice of predryingwetting techniques and unachieved moisture uniformity in samples due to inadequate time. This analysis and corresponding suggestions can facilitate improved AWM method with more satisfying accuracy and time cost.
Asunto(s)
Análisis de los Alimentos/métodos , Agua/análisis , Desecación , Manipulación de Alimentos , Calor , Reproducibilidad de los Resultados , VacioRESUMEN
Apple pomace is a promising source of carbohydrates, proteins, amino acids, fatty acids, phenolic compounds, vitamins, and other compounds with a vast range of food applications. This review focuses on the valorization of apple pomace towards the recovery of the main compounds, namely pectin and polyphenols. Applications, advantages, and drawbacks of conventional extraction (acidic medium under high temperatures) compared with novel extraction technologies are presented. The comparison is based on an extensive literature review of research on extraction of valuable compounds from plant matrixes, particularly apple pomace. Novel extraction techniques involving enzymes, electric field, ultrasound, microwave heating, pressurized liquid, and super/subcritical fluid are also discussed. These techniques offer several advantages, including shorter extraction time, increased yield, reduction-or suppression-of solvents, and minimization of the environmental impact. This paper may help researchers and food industry professionals on the scaling-up and optimization of eco-friendly extractions of pectin and phenolic compounds.
RESUMEN
The assessment of binding affinity between ligands and the target proteins plays an essential role in drug discovery and design process. As an alternative to widely used scoring approaches, machine learning methods have also been proposed for fast prediction of the binding affinity with promising results, but most of them were developed as all-purpose models despite of the specific functions of different protein families, since proteins from different function families always have different structures and physicochemical features. In this study, we proposed a random forest method to predict the protein-ligand binding affinity based on a comprehensive feature set covering protein sequence, binding pocket, ligand structure and intermolecular interaction. Feature processing and compression was respectively implemented for different protein family datasets, which indicates that different features contribute to different models, so individual representation for each protein family is necessary. Three family-specific models were constructed for three important protein target families of HIV-1 protease, trypsin and carbonic anhydrase respectively. As a comparison, two generic models including diverse protein families were also built. The evaluation results show that models on family-specific datasets have the superior performance to those on the generic datasets and the Pearson and Spearman correlation coefficients (R p and Rs) on the test sets are 0.740, 0.874, 0.735 and 0.697, 0.853, 0.723 for HIV-1 protease, trypsin and carbonic anhydrase respectively. Comparisons with the other methods further demonstrate that individual representation and model construction for each protein family is a more reasonable way in predicting the affinity of one particular protein family.
Asunto(s)
Inteligencia Artificial , Diseño de Fármacos , Proteínas/metabolismo , Anhidrasas Carbónicas/metabolismo , Diseño Asistido por Computadora , Bases de Datos de Proteínas , Proteasa del VIH/metabolismo , Humanos , Ligandos , Modelos Biológicos , Unión Proteica , Tripsina/metabolismoRESUMEN
Goal: As an essential human-machine interactive task, emotion recognition has become an emerging area over the decades. Although previous attempts to classify emotions have achieved high performance, several challenges remain open: 1) How to effectively recognize emotions using different modalities remains challenging. 2) Due to the increasing amount of computing power required for deep learning, how to provide real-time detection and improve the robustness of deep neural networks is important. Method: In this paper, we propose a deep learning-based multimodal emotion recognition (MER) called Deep-Emotion, which can adaptively integrate the most discriminating features from facial expressions, speech, and electroencephalogram (EEG) to improve the performance of the MER. Specifically, the proposed Deep-Emotion framework consists of three branches, i.e., the facial branch, speech branch, and EEG branch. Correspondingly, the facial branch uses the improved GhostNet neural network proposed in this paper for feature extraction, which effectively alleviates the overfitting phenomenon in the training process and improves the classification accuracy compared with the original GhostNet network. For work on the speech branch, this paper proposes a lightweight fully convolutional neural network (LFCNN) for the efficient extraction of speech emotion features. Regarding the study of EEG branches, we proposed a tree-like LSTM (tLSTM) model capable of fusing multi-stage features for EEG emotion feature extraction. Finally, we adopted the strategy of decision-level fusion to integrate the recognition results of the above three modes, resulting in more comprehensive and accurate performance. Result and Conclusions: Extensive experiments on the CK+, EMO-DB, and MAHNOB-HCI datasets have demonstrated the advanced nature of the Deep-Emotion method proposed in this paper, as well as the feasibility and superiority of the MER approach.
RESUMEN
In this study, O-quaternary ammonium chitosan (O-HTCC) containing bicationic antibacterial active groups was synthesized to develop an O-HTCC/PVA porous nanofibrous film to enhance antibacterial activity, leveraging surface modification and nano-porous structure design. Uniform and smooth nanofibrous structures (average diameter: 72-294 nm) were successfully obtained using a simple and feasible electrospinning method. A response surface model via Box-Behnken design (BBD) was used to clarify the interaction relationship between O-HTCC fiber diameter and three critical electrospinning parameters (O-HTCC concentration, applied voltage, feed flow rate), predicting that the minimum O-HTCC fiber diameter (174 nm) could be achieved with 7 wt% of O-HTCC concentration, 14 kV of voltage, and 0.11 mL/h of feed flow rate. Linear regression (R2 = 0.9736, Radj2 = 0.9716) and the Anderson Darling test demonstrated the excellent fit of the RSM-BBD model. Compared to N-HTCC/PVA nanofibrous film, the O-HTCC/PVA version showed increased growth inhibition and more effective antibacterial efficacies against Escherichia coli (E. coli) (~;86.34 %) and Staphylococcus aureus (S. aureus) (~;99.99 %). DSC revealed improved thermal stability with an increased melting temperature (238 °C) and endothermic enthalpy (157.7 J/g). This study holds potential for further development of antibacterial packaging to extend food shelf-life to reduce bacterial infection.
Asunto(s)
Antibacterianos , Quitosano , Escherichia coli , Nanofibras , Alcohol Polivinílico , Compuestos de Amonio Cuaternario , Quitosano/química , Quitosano/farmacología , Nanofibras/química , Alcohol Polivinílico/química , Antibacterianos/farmacología , Antibacterianos/química , Compuestos de Amonio Cuaternario/química , Compuestos de Amonio Cuaternario/farmacología , Escherichia coli/efectos de los fármacos , Escherichia coli/crecimiento & desarrollo , Pruebas de Sensibilidad Microbiana , Staphylococcus aureus/efectos de los fármacos , PorosidadRESUMEN
Tin halide perovskites are rising as promising candidates for next-generation optoelectronic materials due to their good optoelectronic properties and relatively low toxicity. However, the high defect density and the easy oxidation of Sn2+ have limited their optoelectronic performance. Herein, we report the treatment of the FASnI3 (formamidinium tin, FA) perovskite film by a bifunctional cesium fluoride (CsF) additive, which improves the film quality and significantly enhances the photoelectric performance. The responsivity of the perovskite-based photodetector (PD) with an optimal CsF concentration of 15% is over 60 times larger than that of the PD without CsF. It indicates that both the Cs substitution and the fluoride anion additive from CsF inhibit the oxidation of Sn2+, optimize the crystal growth, and passivate the defects, demonstrating the dual roles of the CsF additive in improving the photoelectric performance. This work offers valuable insights into the additive selection for developing high-quality tin-based perovskite films and devices.
RESUMEN
OBJECTIVES: To analyze the correlation between age and sperm DNA fragmentation index (DFI), and determine whether the number of eggs retrieved from the female partner was associated with the impact of sperm DFI on clinical pregnancy rates. METHODS: A retrospective analysis of 896 couples aged 19-58 years who were treated at our hospital between 2019 and 2021 was performed to analyse male semen parameters and to investigate the correlation between male age, semen parameters and DFI. In total, data from 330 cycles of assisted reproduction in couples over 40 years of age were analyzed, including 66 cycles with a normal DFI (≤ 15) and 264 cycles with an abnormal DFI (> 15), so as to correlate clinical outcomes based on the number of eggs retrieved per woman and DFI. In order to identify factors associated with clinical outcomes, logistic regression analysis was carried out. RESULTS: There was no significant decrease in semen parameters (motility and concentration) with increasing age of the male partner (P > 0.05). DFI was positively correlated with male age and was significantly higher when age was ≥ 40 years (P = 0.002). A lower number of eggs retrieved (< 4) led to a reduced clinical pregnancy rate; with similar outcomes being found for a reduction in DFI. CONCLUSION: When male partner age exceeded 40 years, both the DFI and the number of eggs retrieved affected the clinical pregnancy rate.
RESUMEN
Tanshinone IIA is a lipophilic organic compound from the root of Danshen (Salvia miltiorrhiza) and is one of the most well-known Tanshinone molecules by pharmacologists. In recent years, in addition to effects of anti-cardiovascular and neurological diseases, Tanshinone IIA has also shown some degrees of anti-prostate cancer potential. Although they do have some studies focusing on the molecular mechanism of Tanshinone IIA's anti-prostate cancer effects, a further understanding on the transcriptomic and structural level is still lacking. In this study, transcriptomic sequencing technology and computer technology were employed to illustrate the effects of Tanshinone IIA on prostate cancer through bioinformatic analysis and molecular dynamics simulation, and PPARG was considered to be one of the targets for Tanshinone IIA according to docking scoring and dynamic calculation. Our study provides a novel direction to further understand the mechanism of the effects of Tanshinone IIA on prostate cancer, and further molecular biological studies need to be carried on to further investigate the molecular mechanism of Tanshinone IIA's anti-prostate cancer effect through PPARG.
Asunto(s)
PPAR gamma , Neoplasias de la Próstata , Humanos , Masculino , Simulación del Acoplamiento Molecular , TranscriptomaRESUMEN
This study developed a new "capture and killing" antibacterial approach for efficient elimination of foodborne pathogens. Fe3O4-Chitosan (CS)/polyvinyl alcohol (PVA) nanofibrous films with improved antibacterial and mechanical properties were fabricated by a simple, environmentally friendly, and cost-effective electrospinning technique. The relationship between the physical properties (viscosity, surface tension, and conductivity) and spinnability of CS/PVA as fiber forming matrix was explored. Electrospun Fe3O4-CS/PVA films (0.03-0.12 mm) with smooth and bead-free nanofibrous structures (145-169 nm) were successfully obtained. Compared with the film electrospun from neat CS/PVA, incorporating Fe3O4 nanoparticles (NPs) (1.25-5 wt%) in CS/PVA nanofibrous film promoted bacterial attachment and increased the final inactivated efficiency, showing a difference with Fe3O4 loading and bacterial strain, which had the highest value against Escherichia coli (E. coli) and Staphyloccus aureus (S. aureus) being 90 % and 66.30 %, respectively. The tensile strength and elongation at break of Fe3O4-CS/PVA films enhanced by 46-192 % and 92-141 %, respectively. Results of the cytotoxicity test indicated that the resulting films had high biocompatibility. These promising findings provide a novel strategy for effective foodborne pathogens elimination, which could apply to sterilizing and food packaging to extend the shelf life of liquid food.
Asunto(s)
Quitosano , Nanofibras , Quitosano/química , Alcohol Polivinílico/química , Nanofibras/química , Escherichia coli , Staphylococcus aureus , Antibacterianos/farmacología , Antibacterianos/químicaRESUMEN
Background: Avoidant paruresis is a common clinical condition in urology and psychosomatic medicine. However, it has limited treatment options that are safe and effective with few side effects. Aims: Our study aimed to investigate the effectiveness and safety of the Chinese herbal Yangxin Tongquan decoction combined with cognitive-behavioural therapy (CBT) for avoidant paruresis. Methods: Sixty-eight patients with avoidant paruresis were divided into a treatment group (33 patients) and a control group (35 patients). The control group was assigned 10 weeks of CBT and systematic desensitisation. In addition to CBT and systematic desensitisation, the treatment group was given the Chinese herbal Yangxin Tongquan decoction during the 10-week study. The Shy Bladder Syndrome Scale (SBS) and the Self-rating Anxiety Scale (SAS) were administered before and after treatment to measure any change. Results: The overall efficacy in the treatment group (n=30) was 80.0% vs 62.5% in the control group (n=33). Comparing pretreatment and post-treatment measures, both groups showed improvement in SBS scores and SAS scores (treatment group: t(SBS) =8.397, p(SBS) <0.001, t(SAS) =8.216, p(SAS)<0.001; control group: t(SBS) =6.802, p(SBS) <0.001, t(SAS)=5.171, p(SAS) <0.001). Moreover, both groups' SBS and SAS scores changed significantly over time (SBS scores: Ftime =118.299, p<0.001; SAS scores: Ftime =92.114, p<0.001). However, the treatment group performed better than the control group (SBS scores: Ftime*group =5.709, p=0.020; SAS scores: Ftime*group =7.235, p=0.009). Conclusions: The Chinese herbal Yangxin Tongquan decoction combined with cognitive-behavioural psychotherapy positively affects the treatment of avoidant paruresis without significant adverse effects.