Learning Ground Displacement Signals Directly from InSAR-Wrapped Interferograms.

Monitoring ground displacements identifies potential geohazard risks early before they cause critical damage. Interferometric synthetic aperture radar (InSAR) is one of the techniques that can monitor these displacements with sub-millimeter accuracy. However, using the InSAR technique is challenging due to the need for high expertise, large data volumes, and other complexities. Accordingly, the development of an automated system to indicate ground displacements directly from the wrapped interferograms and coherence maps could be highly advantageous. Here, we compare different machine learning algorithms to evaluate the feasibility of achieving this objective. The inputs for the implemented machine learning models were pixels selected from the filtered-wrapped interferograms of Sentinel-1, using a coherence threshold. The outputs were the same pixels labeled as fast positive, positive, fast negative, negative, and undefined movements. These labels were assigned based on the velocity values of the measurement points located within the pixels. We used the Parallel Small Baseline Subset service of the European Space Agency's GeoHazards Exploitation Platform to create the necessary interferograms, coherence, and deformation velocity maps. Subsequently, we applied a high-pass filter to the wrapped interferograms to separate the displacement signal from the atmospheric errors. We successfully identified the patterns associated with slow and fast movements by discerning the unique distributions within the matrices representing each movement class. The experiments included three case studies (from Italy, Portugal, and the United States), noted for their high sensitivity to landslides. We found that the Cosine K-nearest neighbor model achieved the best test accuracy. It is important to note that the test sets were not merely hidden parts of the training set within the same region but also included adjacent areas. We further improved the performance with pseudo-labeling, an approach aimed at evaluating the generalizability and robustness of the trained model beyond its immediate training environment. The lowest test accuracy achieved by the implemented algorithm was 80.1%. Furthermore, we used ArcGIS Pro 3.3 to compare the ground truth with the predictions to visualize the results better. The comparison aimed to explore indications of displacements affecting the main roads in the studied area.

GBDT Method Integrating Feature-Enhancement and Active-Learning Strategies-Sea Ice Thickness Inversion in Beaufort Sea.

Sea ice, as an important component of the Earth's ecosystem, has a profound impact on global climate and human activities due to its thickness. Therefore, the inversion of sea ice thickness has important research significance. Due to environmental and equipment-related limitations, the number of samples available for remote sensing inversion is currently insufficient. At high spatial resolutions, remote sensing data contain limited information and noise interference, which seriously affect the accuracy of sea ice thickness inversion. In response to the above issues, we conducted experiments using ice draft data from the Beaufort Sea and designed an improved GBDT method that integrates feature-enhancement and active-learning strategies (IFEAL-GBDT). In this method, the incident angle and time series are used to perform spatiotemporal correction of the data, reducing both temporal and spatial impacts. Meanwhile, based on the original polarization information, effective multi-attribute features are generated to expand the information content and improve the separability of sea ice with different thicknesses. Taking into account the growth cycle and age of sea ice, attributes were added for month and seawater temperature. In addition, we studied an active learning strategy based on the maximum standard deviation to select more informative and representative samples and improve the model's generalization ability. The improved GBDT model was used for training and prediction, offering advantages in dealing with nonlinear, high-dimensional data, and data noise problems, further expanding the effectiveness of feature-enhancement and active-learning strategies. Compared with other methods, the method proposed in this paper achieves the best inversion accuracy, with an average absolute error of 8 cm and a root mean square error of 13.7 cm for IFEAL-GBDT and a correlation coefficient of 0.912. This research proves the effectiveness of our method, which is suitable for the high-precision inversion of sea ice thickness determined using Sentinel-1 data.

Integration of Sentinel-1A Radar and SMAP Radiometer for Soil Moisture Retrieval over Vegetated Areas.

NASA's Soil Moisture Active Passive (SMAP) was originally designed to combine high-resolution active (radar) and coarse-resolution but highly sensitive passive (radiometer) L-band observations to achieve unprecedented spatial resolution and accuracy for soil moisture retrievals. However, shortly after SMAP was put into orbit, the radar component failed, and the high-resolution capability was lost. In this paper, the integration of an alternative radar sensor with the SMAP radiometer is proposed to enhance soil moisture retrieval capabilities over vegetated areas in the absence of the original high-resolution radar in the SMAP mission. ESA's Sentinel-1A C-band radar was used in this study to enhance the spatial resolution of the SMAP L-band radiometer and to improve soil moisture retrieval accuracy. To achieve this purpose, we downscaled the 9 km radiometer data of the SMAP to 1 km utilizing the Smoothing Filter-based Intensity Modulation (SFIM) method. An Artificial Neural Network (ANN) was then trained to exploit the synergy between the Sentinel-1A radar, SMAP radiometer, and the in situ-measured soil moisture. An analysis of the data obtained for a plant growing season over the Mississippi Delta showed that the VH-polarized Sentinel-1A radar data can yield a coefficient of correlation of 0.81 and serve as a complimentary source to the SMAP radiometer for more accurate and enhanced soil moisture prediction over agricultural fields.

Prediction of Surface Subsidence in Mining Areas Based on Ascending-Descending Orbits Small Baseline Subset InSAR and Neural Network Optimization Models.

Surface subsidence hazards in mining areas are common geological disasters involving issues such as vegetation degradation and ground collapse during the mining process, which also raise safety concerns. To address the accuracy issues of traditional prediction models and study methods for predicting subsidence in open-pit mining areas, this study first employed 91 scenes of Sentinel-1A ascending and descending orbits images to monitor long-term deformations of a phosphate mine in Anning City, Yunnan Province, southwestern China. It obtained annual average subsidence rates and cumulative surface deformation values for the study area. Subsequently, a two-dimensional deformation decomposition was conducted using a time-series registration interpolation method to determine the distribution of vertical and east-west deformations. Finally, three prediction models were employed: Back Propagation Neural Network (BPNN), BPNN optimized by Genetic Algorithm (GA-BP), and BPNN optimized by Artificial Bee Colony Algorithm (ABC-BP). These models were used to forecast six selected time series points. The results indicate that the BPNN model had Mean Absolute Errors (MAE) and Root Mean Squared Errors (RMSE) within 7.6 mm, while the GA-BP model errors were within 3.5 mm, and the ABC-BP model errors were within 3.7 mm. Both optimized models demonstrated significantly improved accuracy and good predictive capabilities.

Comparison of the monitoring of surface deformations in open-pit mines with Sentinel-1A and TerraSAR-X satellite radar data.

In case necessary precautions are not taken in surface mines, serious accidents and loss of life may occur, particularly due to large mass displacements. It is extremely important to identify the early warning signs of these displacements and take the necessary precautions. In this study, free medium-resolution satellite radar images from the European Space Agency's (ESA) C-band Sentinel-1A satellite and commercial high-resolution satellite radar images (SAR, Synthetic Aperture Radar) from the Deutsches Zentrum für Luft- und Raumfahrt's (DLR) X-band TerraSAR-X satellite were obtained, and it was attempted to reveal the traceability and adequacy of monitoring of deformations and possible mass displacements in the dump site of an open-pit coal mine. The compatibility of the results obtained from the satellite radar data with two devices of Global Positioning System (GPS) which were installed in the field was evaluated. Furthermore, the velocity results in the Line Of Sight (LOS) direction and vertical deformation velocity results obtained with all three approaches (GPS/Sentinel-1A, GPS/TerraSAR-X, and Sentinel-1A/TerraSAR-X) were compared. It was observed that the results were statistically equal and the directions of movement were similar/compatible. The result of this study showed that deformations at mine sites can be monitored with sufficient accuracy for early warning with free Sentinel-1A satellite data, although the TerraSAR-X satellite offers a higher resolution.

A comprehensive research on open surface drinking water resources in Istanbul using remote sensing technologies.

Istanbul is a megacity with a population of 15.5 million and is one of the fastest-growing cities in Europe. Due to the rapidly increasing population and urbanization, Istanbul's daily water needs are constantly increasing. In this study, eight drinking water basins that supply water to Istanbul were comprehensively examined using remote sensing observations and techniques. Water surface area changes were determined monthly, and their relationships with meteorological parameters and climate change were investigated. Monthly water surface areas of natural lakes and dams were determined with the Normalized Difference Water Index (NDWI) applied to Sentinel-2 satellite images. Sentinel-1 Synthetic Aperture Radar (SAR) images were used in months when optical images were unavailable. The study was carried out using 3705 optical and 1167 SAR images on the Google Earth Engine (GEE) platform. Additionally, to determine which areas of water resources are shrinking, water frequency maps of the major drinking water resources were produced. Land use/land cover (LULC) changes that occurred over time were determined, and the effects of the increase in urbanization, especially on drinking water surface areas, were investigated. ESRI LULC data was used to determine LULC changes in watersheds, and the increase in urbanization areas from 2017 to 2022 ranged from 1 to 91.43%. While the basin with the least change was in Istranca, the highest increase in the artificial surface was determined to be in the Büyükçekmece basin with 1833.03 ha (2.89%). While there was a 1-12.35% decrease in the surface areas of seven water resources from 2016 to 2022, an increase of 2.65-93% was observed in three water resources (Büyükçekmece, Sazlidere, and Elmali), each in different categories depending on their size. In the overall analysis, total WSA decreased by 62.33 ha from 2016 to 2022, a percentage change of 0.70%. Besides the areal change analysis, the algae contents of the drinking water resources over the years were examined for the major water basins using the Normalized Difference Chlorophyll Index (NDCI) and revealed their relationship with meteorological factors and urbanization.

Water distribution based on SAR and optical data to improve hazard mapping.

Climate projections foresee intense precipitation and long-term drought events is increasing with consequent rapid changes in surface water bodies in a short period. In areas with drastic hydrological changes, achieving accurate and rapid mapping of these phenomena in combination with hydrologic variability characteristics is a key of effective emergency management and disaster risk reduction plans. This study presents an automatic method for mapping drought and flood hazards, particularly in regions with significant hydrological changes. We use Sentinel-1/2 and Landsat data to extract surface water and classify permanent and seasonal water bodies in historical periods, which serve as the basis for identifying flood or drought areas. The water extraction method combines index-based analysis for optical data and the region-Otsu method for radar data, ensuring accurate identification of water. The effectiveness of this approach is demonstrated through comparisons with existing products in Poyang Lake (China), the Po River Plain (Italy), and the Indus River Plain (Pakistan). Findings show a high similarity between the two, and our results can provide more specific details. Our method is particularly well-suited for areas with fluctuating hydrological conditions, can also map quickly without optical data. By effectively identifying areas affected by drought and flood hazards while mitigating errors from natural hydrological dynamics, this methodology contributes valuable insights to enhance emergency management and disaster risk reduction plans.

Comparing NISAR (Using Sentinel-1), USDA/NASS CDL, and Ground Truth Crop/Non-Crop Areas in an Urban Agricultural Region.

A general limitation in assessing the accuracy of land cover mapping is the availability of ground truth data. At sites where ground truth is not available, potentially inaccurate proxy datasets are used for sub-field-scale resolution investigations at large spatial scales, i.e., in the Contiguous United States. The USDA/NASS Cropland Data Layer (CDL) is a popular agricultural land cover dataset due to its high accuracy (>80%), resolution (30 m), and inclusions of many land cover and crop types. However, because the CDL is derived from satellite imagery and has resulting uncertainties, comparisons to available in situ data are necessary for verifying classification performance. This study compares the cropland mapping accuracies (crop/non-crop) of an optical approach (CDL) and the radar-based crop area (CA) approach used for the upcoming NASA-ISRO Synthetic Aperture Radar (NISAR) L- and S-band mission but using Sentinel-1 C-band data. CDL and CA performance are compared to ground truth data that includes 54 agricultural production and research fields located at USDA's Beltsville Agricultural Research Center (BARC) in Maryland, USA. We also evaluate non-crop mapping accuracy using twenty-six built-up and thirteen forest sites at BARC. The results show that the CDL and CA have a good pixel-wise agreement with one another (87%). However, the CA is notably more accurate compared to ground truth data than the CDL. The 2017-2021 mean accuracies for the CDL and CA, respectively, are 77% and 96% for crop, 100% and 94% for built-up, and 100% and 100% for forest, yielding an overall accuracy of 86% for the CDL and 96% for CA. This difference mainly stems from the CDL under-detecting crop cover at BARC, especially in 2017 and 2018. We also note that annual accuracy levels varied less for the CA (91-98%) than for the CDL (79-93%). This study demonstrates that a computationally inexpensive radar-based cropland mapping approach can also give accurate results over complex landscapes with accuracies similar to or better than optical approaches.

Investigating Correlations and the Validation of SMAP-Sentinel L2 and In Situ Soil Moisture in Thailand.

Soil moisture plays a crucial role in various hydrological processes and energy partitioning of the global surface. The Soil Moisture Active Passive-Sentinel (SMAP-Sentinel) remote-sensing technology has demonstrated great potential for monitoring soil moisture with a maximum spatial resolution of 1 km. This capability can be applied to improve the weather forecast accuracy, enhance water management for agriculture, and managing climate-related disasters. Despite the techniques being increasingly used worldwide, their accuracy still requires field validation in specific regions like Thailand. In this paper, we report on the extensive in situ monitoring of soil moisture (from surface up to 1 m depth) at 10 stations across Thailand, spanning the years 2021 to 2023. The aim was to validate the SMAP surface-soil moisture (SSM) Level 2 product over a period of two years. Using a one-month averaging approach, the study revealed linear relationships between the two measurement types, with the coefficient of determination (R-squared) varying from 0.13 to 0.58. Notably, areas with more uniform land use and topography such as croplands tended to have a better coefficient of determination. We also conducted detailed soil core characterization, including soil-water retention curves, permeability, porosity, and other physical properties. The basic soil properties were used for estimating the correlation constants between SMAP and in situ soil moistures using multiple linear regression. The results produced R-squared values between 0.933 and 0.847. An upscaling approach to SMAP was proposed that showed promising results when a 3-month average of all measurements in cropland was used together. The finding also suggests that the SMAP-Sentinel remote-sensing technology exhibits significant potential for soil-moisture monitoring in certain applications. Further validation efforts and research, particularly in terms of root-zone depths and area-based assessments, especially in the agricultural sector, can greatly improve the technology's effectiveness and usefulness in the region.

A Statistical Approach for the Integration of Multi-Temporal InSAR and GNSS-PPP Ground Deformation Measurements.

Determining and monitoring ground deformations is critical for hazard management studies, especially in megacities, and these studies might help prevent future disaster conditions and save many lives. In recent years, the Golden Horn, located in the southeast of the European part of Istanbul within a UNESCO-protected region, has experienced significant changes and regional deformations linked to rapid population growth, infrastructure work, and tramway construction. In this study, we used Interferometric Synthetic Aperture Radar (InSAR) and Global Navigation Satellite System (GNSS) techniques to investigate the ground deformations along the Golden Horn coastlines. The investigated periods are between 2015 and 2020 and 2017 and 2020 for InSAR and GNSS, respectively. For the InSAR analyses, we used sequences of multi-temporal synthetic aperture radar (SAR) images collected by the Sentinel-1 and ALOS-2 satellites. The ground displacement products (i.e., time series and velocity maps) were then cross-compared with those achievable using the Precise Point Positioning (PPP) technique for the GNSS solutions, which can provide precise positions with a single receiver. In the proposed analysis, we compared the ground displacement velocities obtained by both methods by computing the standard deviations of the difference between the relevant observations considering a weighted least square estimation procedure. Additionally, we identified five circle buffers with different radii ranging between 50 m and 250 m for selecting the most appropriate coherent points to conduct the cross-comparison analysis. Moreover, a vertical displacement rate map was produced. The comparison of the vertical ground velocities derived from PPP and InSAR demonstrates that the PPP technique is valuable. For the coherent stations, the vertical displacement rates vary between -4.86 mm/yr and -23.58 mm/yr and -9.50 and -27.77 mm/yr for InSAR and GNSS, respectively.

SBAS-InSAR Based Deformation Monitoring of Tailings Dam: The Case Study of the Dexing Copper Mine No.4 Tailings Dam.

The No.4 tailings pond of the Dexing Copper Mine is the second largest in Asia. The tailing pond is a dangerous source of man-made debris flow with high potential energy. In view of the lack of effective and low-cost global safety monitoring means in this region, in this paper, the time-series InSAR technology is innovatively introduced to monitor the deformation of tailings dam and significant key findings are obtained. First, the surface deformation information of the tailings pond and its surrounding areas was extracted by using SBAS-InSAR technology and Sentinel-1A data. Second, the cause of deformation is explored by analyzing the deformation rate, deformation accumulation, and three typical deformation rate profiles of the representative observation points on the dam body. Finally, the power function model is used to predict the typical deformation observation points. The results of this paper indicated that: (1) the surface deformation of the tailings dam can be categorized into two directions: the upper portion of the dam moving away from the satellite along the Line of Sight (LOS) at a rate of -40 mm/yr, whereas the bottom portion approaching the satellite along the LOS at a rate of 8 mm/yr; (2) the deformation of the dam body is mainly affected by the inventory deposits and the construction materials of the dam body; (3) according to the current trend, deformation of two typical observation points in the LOS direction will reach the cumulative deformation of 80 mm and -360 mm respectively. The research results can provide data support for safety management of No.4 tailings dam in the Dexing Copper Mine, and provide a method reference for monitoring other similar tailings dams.

Multi-Annual Evaluation of Time Series of Sentinel-1 Interferometric Coherence as a Tool for Crop Monitoring.

Interferometric coherence from SAR data is a tool used in a variety of Earth observation applications. In the context of crop monitoring, vegetation indices are commonly used to describe crop dynamics. The most frequently used vegetation indices based on radar data are constructed using the backscattered intensity at different polarimetric channels. As coherence is sensitive to the changes in the scene caused by vegetation and its evolution, it may potentially be used as an alternative tool in this context. The objective of this work is to evaluate the potential of using Sentinel-1 interferometric coherence for this purpose. The study area is an agricultural region in Sevilla, Spain, mainly covered by 18 different crops. Time series of different backscatter-based radar vegetation indices and the coherence amplitude for both VV and VH channels from Sentinel-1 were compared to the NDVI derived from Sentinel-2 imagery for a 5-year period, from 2017 to 2021. The correlations between the series were studied both during and outside the growing season of the crops. Additionally, the use of the ratio of the two coherences measured at both polarimetric channels was explored. The results show that the coherence is generally well correlated with the NDVI across all seasons. The ratio between coherences at each channel is a potential alternative to the separate channels when the analysis is not restricted to the growing season of the crop, as its year-long temporal evolution more closely resembles that of the NDVI. Coherence and backscatter can be used as complementary sources of information, as backscatter-based indices describe the evolution of certain crops better than coherence.

Utilising Sentinel-1's Orbital Stability for Efficient Pre-Processing of Radiometric Terrain Corrected Gamma Nought Backscatter.

Radiometric Terrain Corrected (RTC) gamma nought backscatter, which was introduced around a decade ago, has evolved into the standard for analysis-ready Synthetic Aperture Radar (SAR) data. While working with RTC backscatter data is particularly advantageous over undulated terrain, it requires substantial computing resources given that the terrain flattening is more computationally demanding than simple orthorectification. The extra computation may become problematic when working with large SAR datasets such as the one provided by the Sentinel-1 mission. In this study, we examine existing Sentinel-1 RTC pre-processing workflows and assess ways to reduce processing and storage overheads by considering the satellite's high orbital stability. By propagating Sentinel-1's orbital deviations through the complete pre-processing chain, we show that the local contributing area and the shadow mask can be assumed to be static for each relative orbit. Providing them as a combined external static layer to the pre-processing workflow, and streamlining the transformations between ground and orbit geometry, reduces the overall processing times by half. We conducted our experiments with our in-house developed toolbox named wizsard, which allowed us to analyse various aspects of RTC, specifically run time performance, oversampling, and radiometric quality. Compared to the Sentinel Application Platform (SNAP) this implementation allowed speeding up processing by factors of 10-50. The findings of this study are not just relevant for Sentinel-1 but for all SAR missions with high spatio-temporal coverage and orbital stability.

Inversion of Forest Biomass Based on Multi-Source Remote Sensing Images.

Ecological forests are an important part of terrestrial ecosystems, are an important carbon sink and play a pivotal role in the global carbon cycle. At present, the comprehensive utilization of optical and radar data has broad application prospects in forest parameter extraction and biomass estimation. In this study, tree and topographic data of 354 plots in key nature reserves of Liaoning Province were used for biomass analysis. Remote sensing parameters were extracted from Landsat 8 OLI and Sentinel-1A radar data. Based on the strong correlation factors obtained via Pearson correlation analysis, a linear model, BP neural network model and PSO neural network model were used to simulate the biomass of the study area. The advantages of the three models were compared and analyzed, and the optimal model was selected to invert the biomass of Liaoning province. The results showed that 44 factors were correlated with forest biomass (p < 0.05), and 21 factors were significantly correlated with forest biomass (p < 0.01). The comparison between the prediction results of the three models and the real results shows that the PSO-improved neural network simulation results are the best, and the coefficient of determination is 0.7657. Through analysis, it is found that there is a nonlinear relationship between actual biomass and remote sensing data. Particle swarm optimization (PSO) can effectively solve the problem of low accuracy in traditional BP neural network models while maintaining a good training speed. The improved particle swarm model has good accuracy and speed and has broad application prospects in forest biomass inversion.

Near real-time flood inundation and hazard mapping of Baitarani River Basin using Google Earth Engine and SAR imagery.

Flood inundation mapping and satellite imagery monitoring are critical and effective responses during flood events. Mapping of a flood using optical data is limited due to the unavailability of cloud-free images. Because of its capacity to penetrate clouds and operate in all kinds of weather, synthetic aperture radar is preferred for water inundation mapping. Flood mapping in Eastern India's Baitarani River Basin for 2018, 2019, 2020, 2021, and 2022 was performed in this study using Sentinel-1 imagery and Google Earth Engine with Otsu's algorithm. Different machine-learning algorithms were used to map the LULC of the study region. Dual polarizations VH and VV and their combinations VV×VH, VV+VH, VH-VV, VV-VH, VV/VH, and VH/VV were examined to identify non-water and water bodies. The normalized difference water index (NDWI) map derived from Sentinel-2 data validated the surface water inundation with 80% accuracy. The total inundated areas were identified as 440.3 km2 in 2018, 268.58 km2 in 2019, 178.40 km2 in 2020, 203.79 km2 in 2021, and 321.33 km2 in 2022, respectively. The overlap of flood maps on the LULC map indicated that flooding highly affected agriculture and urban areas in these years. The approach using the near-real-time Sentinel-1 SAR imagery and GEE platform can be operationalized for periodic flood mapping, helps develop flood control measures, and helps enhance flood management. The generated annual flood inundation maps are also useful for policy development, agriculture yield estimation, crop insurance framing, etc.

Using Sentinel images for analyzing water and land separability in an agricultural river basin.

The presence or absence of water can result in floods or droughts, potentially impacting agricultural productivity to a great extent. With advancements in remote sensing technology, the reliability of identifying water bodies has significantly improved, particularly in terms of distinguishing between water and land. This study introduced remote sensing methods to improve the accuracy of differentiating water within the Dawenhe River basin. Various water body scenarios were examined, and the performance of these methods was evaluated to determine the proper approach for water-land separation. In applying water body indices to Sentinel-2 images, it was found that the normalized difference water index (NDWI) outperformed the modified normalized difference water index (MNDWI) in identifying water bodies. Consequently, histograms of frequency distribution for Sentinel-1 were generated, revealing that water and land were more distinguishable in VV polarization than in VH polarization. Using histogram thresholding on VV polarized images in Dongping Lake resulted in an overall classification accuracy of 97.58%, surpassing that of Otsu's method at 97.36%. To address the persisting misclassifications, this study identified three leading causes and proposed corresponding solutions. These solutions included (1) employing the morphological dilation algorithm to expand the water area, mitigating pixel mixing issues at the water-land boundary that caused the water bodies to appear smaller; (2) utilizing incidence angles and digital elevation model (DEM) to locate and remove shadows; and (3) slightly lowering the thresholds and manually correcting misclassifications. As a result, the average accuracy of the four areas increased from 95.56 to 96.94%.

Land cover and crop types mapping using different spatial resolution imagery in a Mediterranean irrigated area.

Crop type identification is critical for agricultural sustainability policy development and environmental assessments. Therefore, it is important to obtain their spatial distribution via different approaches. Medium-, high- and very high-resolution optical satellite sensors are efficient tools for acquiring this information, particularly for challenging studies such as those conducted in heterogeneous agricultural fields. This research examined the ability of four multitemporal datasets (Sentinel-1-SAR (S1), Sentinel-2-MSI (S2), RapidEye (RE), and PlanetScope (PS)) to identify land cover and crop types (LCCT) in a Mediterranean irrigated area. To map LCCT distribution, a supervised pixel-based classification is adopted using Support Vector Machine with a radial basis function kernel (SVMRB) and Random Forest (RF). Thus, LCCT maps were generated into three levels, including six (Level I), ten (Level II), and fourteen (Level III) classes. Overall, the findings revealed high overall accuracies of >92%, >83%, and > 81% for Level I, Level II, and Level III, respectively, except for Sentinel-1. It was found that accuracy improves considerably when the number of classes decreases, especially when cropland or non-cropland classes are grouped into one. Furthermore, there was a similarity in performance between S2 alone and S1S2. PlanetScope LCCT classifications outperform other sensors. In addition, the present study demonstrated that SVM achieved better performances against RF and can thereby effectively extract LCCT information from high-resolution imagery as PlanetScope.

Machine learning for modeling forest canopy height and cover from multi-sensor data in Northwestern Ethiopia.

Continuous mapping of the height and canopy cover of forests is vital for measuring forest biomass, monitoring forest degradation and restoration. In this regard, the contribution of Light Detection and Ranging (LiDAR) sensors, which were developed to obtain detailed data on forest composition across large geographical areas, is immense. Accordingly, this study aims to predict forest canopy cover and height in tropical forest areas utilizing Global Ecosystem Dynamics Investigation (GEDI) LIDAR, multisensor images, and random forest regression. To achieve this, we gathered predictor variables from the Shuttle Radar Topography Mission (SRTM) digital elevation model (DEM), Sentinel-2 multispectral datasets, and Sentinel-1 synthetic aperture radar (SAR) backscatters. The model's accuracy was evaluated based on a validation dataset of GEDI Level 2A and Level 2B. The random forest method was used the combination of data layers from Sentinel-1, Sentinel-2, and topographic measurements to model forest canopy cover and height. The produced canopy height and cover maps had a resolution of 30 m with R2 = 0.86 and an RMSE of 3.65 m for forest canopy height and R2 = 0.87 and an RMSE of 0.15 for canopy cover for the year 2022. These results suggest that combining multiple variables and data sources improves canopy cover and height prediction accuracy compared to relying on a single data source. The output of this study could be helpful in creating forest management plans that support sustainable utilization of the forest resources.

Seasonal evaluation and mapping of aboveground biomass in natural rangelands using Sentinel-1 and Sentinel-2 data.

Rangelands play a vital role in developing countries' biodiversity conservation and economic growth, since most people depend on rangelands for their livelihood. Aboveground-biomass (AGB) is an ecological indicator of the health and productivity of rangeland and provides an estimate of the amount of carbon stored in the vegetation. Thus, monitoring seasonal AGB is important for understanding and managing rangelands' status and resilience. This study assesses the impact of seasonal dynamics and fire on biophysical parameters using Sentinel-1 (S1) and Sentinel-2 (S2) image data in the mesic rangeland of Limpopo, South Africa. Six sites were selected (3/area), with homogenous vegetation (10 plots/site of 30m2). The seasonal measurements of LAI and biomass were undertaken in the early summer (December 2020), winter (July-August 2021), and late summer (March 2022). Two regression approaches, random forest (RF) and stepwise multiple linear regression (SMLR), were used to estimate seasonal AGB. The results show a significant difference (p < 0.05) in AGB seasonal distribution and occurrence between the fire (ranging from 0.26 to 0.39 kg/m2) and non-fire areas (0.24-0.35 kg/m2). In addition, the seasonal predictive models derived from random forest regression (RF) are fit to predict disturbance and seasonal variations in mesic tropical rangelands. The S1 variables were excluded from all models due to high moisture content. Hence, this study analyzed the time series to evaluate the correlation between seasonal estimated and field AGB in mesic tropical rangelands. A significant correlation between backscattering, AGB and ecological parameters was observed. Therefore, using S1 and S2 data provides sufficient data to obtain the seasonal changes of biophysical parameters in mesic tropical rangelands after disturbance (fire) and enhanced assessments of critical phenology stages.

Monitoring early-season agricultural drought using temporal Sentinel-1 SAR-based combined drought index.

Early-season agricultural drought is frequent over South Asian region due to delayed or deficient monsoon rainfall. These drought events often cause delay in sowing and can even result in crop failure. The present study focuses on monitoring early-season agricultural drought in a semi-arid region of India over 5-year period (2016-2020). It utilizes hydro-climatic and biophysical variables to develop a combined drought index (CDI), which integrates anomalies in soil moisture conditions, rainfall, and crop-sown area progression. Synthetic aperture radar (SAR)-based soil moisture index (SMI) represents in situ measured soil moisture with reasonable accuracy (r=0.68). Based on the highest F1-score, SAR backscatter in VH (vertical transmit-horizontal receive) polarization with specific values for parameter threshold (-18.63 dB) and slope threshold (-0.072) is selected to determine the start of season (SoS) with a validation accuracy of 73.53%. The CDI approach is used to monitor early-season agricultural drought and identified drought conditions during June-July in 2019 and during July in 2018. Conversely, 2020 experienced consistently wet conditions, while 2016 and 2017 had near-normal conditions. Overall, the study highlights the use of SAR data for early-season agricultural drought monitoring, which is mainly governed by soil moisture-driven crop-sowing progression. The proposed methodology holds potential for effective monitoring, management, and decision-making in early-season agricultural drought scenarios.