Characteristics of SARS-CoV-2 Transmission among Meat Processing Workers in Nebraska, USA, and Effectiveness of Risk Mitigation Measures.

The coronavirus disease (COVID-19) pandemic has severely impacted the meat processing industry in the United States. We sought to detail demographics and outcomes of severe acute respiratory syndrome coronavirus 2 infections among workers in Nebraska meat processing facilities and determine the effects of initiating universal mask policies and installing physical barriers at 13 meat processing facilities. During April 1-July 31, 2020, COVID-19 was diagnosed in 5,002 Nebraska meat processing workers (attack rate 19%). After initiating both universal masking and physical barrier interventions, 8/13 facilities showed a statistically significant reduction in COVID-19 incidence in <10 days. Characteristics and incidence of confirmed cases aligned with many nationwide trends becoming apparent during this pandemic: specifically, high attack rates among meat processing industry workers, disproportionately high risk of adverse outcomes among ethnic and racial minority groups and men, and effectiveness of using multiple prevention and control interventions to reduce disease transmission.

Musculoskeletal and neurological injuries associated with work organization among immigrant Latino women manual workers in North Carolina.

BACKGROUND: This analysis examines the associations of work organization attributes among Latino women in manual occupations with musculoskeletal and neurological injuries. METHODS: Participants included 234 women in western North Carolina. Outcome measures included epicondylitis, rotator cuff syndrome, back pain, and carpal tunnel syndrome. Independent measures included indicators of job demand, job control, and job support, as well as personal characteristics. RESULTS: Latina workers commonly experienced epicondylitis, rotator cuff syndrome, back pain, and CTS. Awkward posture and decision latitude were associated with epicondylitis. Rotator cuff syndrome was associated with awkward posture and psychological demand. Awkward posture and psychological demand, and decreased skill variety and job control were related to CTS. CONCLUSIONS: Work organization factors are potentially important for musculoskeletal and neurological injury among vulnerable workers. Research is required to understand the associations of work and health outcomes of these women. Policy initiatives need to consider how work organization affects health.

3-D jobs and health disparities: The health implications of Latino chicken catchers' working conditions.

OBJECTIVES: This study uses qualitative data to describe the tasks performed by chicken catchers, their organization of work, and possible health and safety hazards encountered. METHODS: Twenty-one Latino immigrant chicken catchers for North Carolina poultry-processing plants were interviewed to obtain their perceptions of the job and its hazards. Interviews were recorded and transcribed (n = 10) or detailed notes recorded (n = 11). Transcripts and notes were subjected to qualitative analysis. RESULTS: Chicken catching takes place in a highly contaminated and hazardous work environment. The fast pace of work, low level of control over work intensity, and piece rate compensation all result in high potential for work-related injury and illness, including trauma, electrical shock, respiratory effects, musculoskeletal injuries, and drug use. Workers receive little safety or job training. CONCLUSIONS: Chicken catching is characterized by a work environment and organization of work that promote injury and illness.

The external leadership of self-managing teams: intervening in the context of novel and disruptive events.

Relatively little empirical research has been conducted on external leaders of self-managing teams. The integration of functional leadership theory with research on team routines suggests that leaders can intervene in teams in several different ways, and the effectiveness of this intervention depends on the nature of the events the team encounters. External team leaders from 3 organizations first described a series of events (N=117), and leaders and team members then completed surveys to quantitatively describe the events. Results indicated that leader preparation and supportive coaching were positively related to team perceptions of leader effectiveness, with preparation becoming more strongly related to effectiveness as event novelty increased. More active leader intervention activities (active coaching and sense making) were negatively related to satisfaction with leadership yet were positively related to effectiveness as events became more disruptive.

Food hygiene and hazard analysis critical control point in the United Kingdom food industry: practices, perceptions, and attitudes.

A mail survey was designed and distributed to 1,650 managers of food businesses across the manufacturing, retail, and catering sectors of the United Kingdom food industry. Respondents were asked about the food hygiene practices of their business, their use of systems such as hazard analysis critical control point (HACCP), and their attitudes toward a range of food hygiene-related issues. Complete responses were received from 254 businesses, a response rate of 15.3%. The results showed that 69% of manufacturers were using HACCP systems, significantly more than the 13% and 15% in the retail and catering sectors, respectively (P < 0.05); 53% of manufacturing, 59% of retail, and 48% of catering managers thought that their business represented a low risk to food safety. Among businesses using HACCP, specific training in the system was significantly related to the likelihood that businesses had adopted all seven of the HACCP principles (P < 0.05). Business size was a significant factor in the use of HACCP in both the manufacturing and retail sectors. Higher levels of food hygiene qualifications among business managers, business status, and higher perceptions among managers of the risk to food safety of the business were also significantly related to HACCP use in all sectors (P < 0.05). The results from this survey have implications for the future development of HACCP, particularly within the UK retail and catering sectors. Risk communication and training are highlighted as areas of concern for marketing HACCP within these industry sectors.

Subprimal purchasing and merchandising decisions for pork: relationship to retail yield and fabrication time.

Boxed pork was obtained to represent four different purchase specifications (different anatomical separation locations and[or] external fat trim levels) common in the pork industry to conduct a study of retail yields and labor requirements. Bone-in loins (n = 180), boneless loins (n = 94), and Boston butts (n = 148) were assigned randomly to fabrication styles within subprimals. When comparing cutting styles within subprimals, it was evident that cutting style affected percentage of retail yield and cutting time. When more bone-in cuts were prepared from bone-in loin subprimals, retail yields ranged from 92.80 +/- .61 to 95.28 +/- .45%, and processing times ranged from 222.57 +/- 10.13 to 318.99 +/- 7.85 s, from the four suppliers. When more boneless cuts were prepared from bone-in loin subprimals, retail yields ranged from 71.12 +/- 1.10 to 77.92 +/- .77% and processing times ranged from 453.49 +/- 8.95 to 631.09 +/- 15.04 s from the different loins. Comparing boneless to bone-in cuts from bone-in loins resulted in lower yields and required greater processing times. Significant variations in yields and times were found within cutting styles. These differences seemed to have been the result of variation in supplier fat trim level and anatomical separation (primarily scribe length).

The use of supervisory practices as leverage to improve safety behavior: a cross-level intervention model.

INTRODUCTION: The paper presents three intervention studies designed to modify supervisory monitoring and rewarding of subordinates' safety performance. METHOD: Line supervisors received weekly feedback concerning the frequency of their safety-oriented interactions with subordinates, and used this to self-monitor progress toward designated improvement goals. Managers higher up in the organizational hierarchy received the same information, coupled with synchronous data concerning the frequency of workers' safety behaviors, and highlighting co-variation of supervisory action and workers' behavior. RESULTS: In all the companies involved, supervisory safety-oriented interaction increased significantly, resulting in significant changes in workers' safety behavior and safety climate scores. Continued improvement during the post-intervention period suggests the inclusion of workers' safety behavior as in-role supervisory responsibility. Applied and theoretical implications are discussed.

Subprimal purchasing and merchandising decisions for pork: relationship to retail value.

To assess retail value and profitability, cutting test data were obtained in a simulated retail cutting room for boxed pork subprimals, bone-in loins (n = 180), boneless loins (n = 94), Boston butts (n = 148), fresh hams (n = 28), and boneless hams (n = 23). Processing times (seconds) and retail weights (kilograms) were used to determine relative value. Cutting style affected (P < .05) value differential (US$/subprimal) for bone-in and boneless loins. When cutting styles within subprimals were pooled, value differential was affected (P < .05) by purchasing specification for bone-in loins, boneless loins, Boston butts, and inside fresh hams. Processing bone-in loins to a boneless end point produced a greater (P < .05) value differential and percentage of gross margin than a bone-in retail end point. Bone-in loins fabricated to a boneless retail end point produced a greater (P < .05) value differential and percentage of gross margin than boneless loins fabricated to the same end point. The increase in retail value can be attributed to the increased number and weight of retail cuts produced from bone-in loins. The thick, boneless loin cutting style produced a greater (P < .05) value differential and percentage of gross margin as a result of a lower (P < .05) cost of fabrication and increased value of retail cuts than the thin, boneless cutting style. In general, boneless pork cutting methods were more profitable than bone-in cutting methods regardless of subprimal.

Canadian beef quality audit.

A study was conducted in 4 Canadian processing plants in 1995-96 to determine the prevalence of quality defects in Canadian cattle. One percent of the annual number of cattle processed in Canada were evaluated on the processing floor and 0.1% were graded in the cooler. Brands were observed on 37% and multiple brands on 6% of the cattle. Forty percent of the cattle had horns, 20% of which were scurs, 33% were stubs, 10% were tipped, and 37% were full length. Tag (mud and manure on the hide) was observed on 34% of the cattle. Bruises were found on 78% of the carcasses, 81% of which were minor in severity. Fifteen percent of the bruises were located on the round, 29% on the loin, 40% on the rib, 16% on the chuck, and 0.02% on the brisket. Grubs were observed in 0.02% of the steers, and injection sites were observed in 1.3% of whole hanging carcasses. Seventy percent of the livers were passed for human food and 14% for pet food; 16% were condemned. Approximately 71% of the liver condemnations were due to liver abscesses. Four percent of the heads, 6% of the tongues, and 0.2% of whole carcasses were condemned. The pregnancy rate in female cattle was approximately 6.7%. The average hot carcass weight was 357 kg (s = 40) in steers, 325 kg (s = 41) in heifers, 305 kg (s = 53) in cows, 388 kg (s = 62) in virgin bulls and 340 kg (s = 39) in mature bulls. The average ribeye area in all cattle was 84 cm2 (s = 12); range 29 cm2 to 128 cm2. Grade fat was highly variable and averaged 9 mm (s = 4) for steers and heifers, 6 mm (s = 6) for cows, 5 mm (s = 1) for virgin bulls, and 4 mm (s = 0.5) for mature bulls. The average lean meat yield was 59.7% in cattle (s = 3.4); range 39% to 67%. One percent of the carcasses were devoid of marbling, 1% were dark cutters, and 0.05% of the steer carcasses were staggy. Six percent of the carcasses had poor conformation, 3.7% were underfinished, and 0.7% were overfinished. Yellow fat was observed in 4% of the carcasses; 10% of carcasses were aged. Based on January 1996 prices, the economic analysis showed that the Canadian beef industry lost $70.52 per head or $189.6 million annually from quality nonconformities. Methods identified to reduce these nonconformities included improvements in management, animal identification, handling, genetic selection, marketing, grading, and information transfer.

Biosecurity in poultry production: where are we and where do we go?

An overview is given about the importance of biosecurity in the poultry industry, and a comparison is made with other systems of disease control such as vaccination and medication. Different measures considered to be important in bio-security are reviewed and some expectations for the future are given. Furthermore, some attention is paid to the animal welfare aspects.

The food safety impact of salt and sodium reduction initiatives.

Excessive or high salt or sodium intake is known to cause hypertension and other diseases. Within the United Kingdom voluntary targets for salt reduction have been set and laid out in the Secretary of State responsibility deal. This review considers the options available to food manufacturers to enable them to reduce salt and the potential food safety risks associated with those options. Gaps in research and knowledge within the areas of information supplied to food manufacturers, alternative solutions for salt replacement and the food safety impact of salt reduction are discussed.

Potential application of quantitative microbiological risk assessment techniques to an aseptic-UHT process in the food industry.

Aseptic ultra-high-temperature (UHT)-type processed food products (e.g., milk or soup) are ready to eat products which are consumed extensively globally due to a combination of their comparative high quality and long shelf life, with no cold chain or other preservation requirements. Due to the inherent microbial vulnerability of aseptic-UHT product formulations, the safety and stability-related performance objectives (POs) required at the end of the manufacturing process are the most demanding found in the food industry. The key determinants to achieving sterility, and which also differentiates aseptic-UHT from in-pack sterilised products, are the challenges associated with the processes of aseptic filling and sealing. This is a complex process that has traditionally been run using deterministic or empirical process settings. Quantifying the risk of microbial contamination and recontamination along the aseptic-UHT process, using the scientifically based process quantitative microbial risk assessment (QMRA), offers the possibility to improve on the currently tolerable sterility failure rate (i.e., 1 defect per 10,000 units). In addition, benefits of applying QMRA are (i) to implement process settings in a transparent and scientific manner; (ii) to develop a uniform common structure whatever the production line, leading to a harmonisation of these process settings, and; (iii) to bring elements of a cost-benefit analysis of the management measures. The objective of this article is to explore how QMRA techniques and risk management metrics may be applied to aseptic-UHT-type processed food products. In particular, the aseptic-UHT process should benefit from a number of novel mathematical and statistical concepts that have been developed in the field of QMRA. Probabilistic techniques such as Monte Carlo simulation, Bayesian inference and sensitivity analysis, should help in assessing the compliance with safety and stability-related POs set at the end of the manufacturing process. The understanding of aseptic-UHT process contamination will be extended beyond the current "as-low-as-reasonably-achievable" targets to a risk-based framework, through which current sterility performance and future process designs can be optimised.

New advances in the integrated management of food processing by-products in Europe: sustainable exploitation of fruit and cereal processing by-products with the production of new food products (NAMASTE EU).

By-products generated every year by the European fruit and cereal processing industry currently exceed several million tons. They are disposed of mainly through landfills and thus are largely unexploited sources of several valuable biobased compounds potentially profitable in the formulation of novel food products. The opportunity to design novel strategies to turn them into added value products and food ingredients via novel and sustainable processes is the main target of recently EC-funded FP7 project NAMASTE-EU. NAMASTE-EU aims at developing new laboratory-scale protocols and processes for the exploitation of citrus processing by-products and wheat bran surpluses via the production of ingredients useful for the formulation of new beverage and food products. Among the main results achieved in the first two years of the project, there are the development and assessment of procedures for the selection, stabilization and the physical/biological treatment of citrus and wheat processing by-products, the obtainment and recovery of some bioactive molecules and ingredients and the development of procedures for assessing the quality of the obtained ingredients and for their exploitation in the preparation of new food products.

From prescribed to real rotations: a means of collective protection for the health of workers in a soft drink factory.

This article describes a particular way developed by employees to respond to the constraints of a very restrictive manufacturing plant: the mutual cooperation. Facing a very strict organizational context, the production workers can only rely on themselves to cope with the constraints of work. In this context, a complex system of strategies is deployed, resulting in a work environment governed by the sense of collaboration and mutual cooperation. The objectives of the implemented strategies, however, go beyond the attempts to reduce the work overload. They may be linked to a way of maintaining high levels of productivity and a way for workers to keep their jobs. We hope to contribute, through this study, to the general knowledge of the strategies developed by workers in production lines in order to minimize the pains.

Work organization and musculoskeletal health: clinical findings from immigrant Latino poultry processing and other manual workers.

OBJECTIVE: To determine the potential role of differential exposure to work organization hazards in musculoskeletal disorders among immigrant Latino workers. METHOD: Self-reported work organization data were obtained from immigrant Latino workers in poultry processing and nonpoultry, manual occupations (N = 742). Clinical evaluations for epicondylitis, rotator cuff syndrome, and back pain were obtained from a subsample (n = 518). RESULTS: Several work organization hazards (eg, low job control, high psychological demands) were elevated among poultry processing workers. Job control predicted epicondylitis (odds ratio [OR] = 0.77) and rotator cuff syndrome (OR = 0.79); psychological demand predicted rotator cuff syndrome (OR = 1.30) and back pain (OR = 1.24); awkward posture and repeated movements predicted all three outcomes; and management safety commitment predicted rotator cuff syndrome (OR = 1.65) and back pain (OR = 1.81). DISCUSSION: Immigrant poultry processing workers are exposed to greater work organization hazards that may contribute to occupational health disparities.

Identification of several gy4 nulls from the USDA soybean germplasm collection provides new genetic resources for the development of high-quality tofu cultivars.

Tofu, a cheese-like food made by curdling soy milk, is a major dietary staple of Asian countries. Consumption of tofu and other soy products is steadily increasing in North America due to its well-known health benefits. Soybean A(5), A(4), and B(3) peptide null lines 'Enrei' and 'Raiden' are commonly utilized in breeding programs to develop high-quality tofu cultivars. To expand the genetic diversity it is desirable to identify and utilize other A(5), A(4), and B(3) null genotypes in the development of improved tofu cultivars that are adapted to North American conditions. In this study were screened diverse soybean accessions from the USDA Soybean Germplasm Collection to identify Gy4 mutants, the locus that controls A(5), A(4), and B(3) peptide production. Analysis of total seed proteins from 485 soybean lines by SDS-PAGE enabled the identification of 38 accessions that lacked the A(5), A(4), and B(3) peptides. These accessions showed marked differences in seed size and seed coat color and represented different maturity groups ranging from 0 to IX. To ascertain the molecular basis for the lack of A(5), A(4), and B(3) peptides in the newly identified Gy4 mutants, the nucleotide sequence of a portion of the Gy4 gene was determined from eight soybean accessions representing different maturity groups. These eight Gy4 mutants revealed a single point mutation that changed the translation initiation codon ATG to ATA, resulting in the A(5), A(4), and B(3) null phenotype. The newly identified Gy4 mutants from this study will enable plant breeders to expand the genetic diversity of North American food-quality soybeans and also aid in the development of hypoallergenic soybeans.

Prevention of Salmonella cross-contamination in an oilmeal manufacturing plant.

AIMS: The mechanisms of Salmonella contamination in an oilmeal plant were investigated and the basic data were collected in order to achieve control of Salmonella in oilmeal. METHODS AND RESULTS: Salmonella was detected in all contamination vectors and environmental factors investigated, namely: operators, processing floor, dust in the air and rodents. In particular, high concentrations of Salmonella were detected on the processing floor of the manufacturing area, which has high oil content. Steam was the most effective disinfection method used for the processing floor, as the effects of heat sterilization and disinfection may work in tandem. In addition, restricting the movement of operators of the production chain remarkably reduced Salmonella contamination, even in areas of otherwise high contamination. CONCLUSIONS: Within the oilmeal plant, high Salmonella contamination rates for the processing floor represent the greatest risk of contamination of oilmeal via operators, dust in the air and rodents. Therefore, control of the processing floor is the most important means for reducing the oilmeal contamination rate. SIGNIFICANCE AND IMPACT OF THE STUDY: Specific Salmonella control methods for oilmeal plants have been established.

Pea proteins based food products as meat replacers: the Profetas concept.

Profetas (Protein Foods, Environment, Technology and Society) is a Dutch trans-disciplinary research programme, aiming to develop more sustainable food systems. The central theme of the programme is the question: is a transition feasible from a diet based primarily on animal proteins to a diet based for a large part on new food products made from plant proteins? In the programme this question is studied from very different disciplinary perspectives. In the programme a consumer and chain oriented approach is adopted. In the experimental part of the programme, pea proteins are studied. Profetas is funded by the Netherlands Organisation for Scientific Research, with support from the Ministry of Agriculture, Nature management and Fisheries and the food industry. The programme compromises 16 PhD and post-doctoral projects.