Effects of pressure, shear, temperature, and their interactions on selected milk quality attributes.

The effects of pressure, temperature, shear, and their interactions on selected quality attributes and stability of milk during ultra-shear technology (UST) were investigated. The UST experiments include pressure (400 MPa) treatment of the milk sample preconditioned at 2 different initial temperatures (25°C and 15°C) and subsequently depressurizing it via a shear valve at 2 flow rates (low: 0.15-0.36 g/s; high: 1.11-1.22 g/s). Raw milk, high-pressure processed (HPP; 400 MPa, ~40°C for 0 and 3 min) and thermal treated (72°C for 15 s) milk samples served as the controls. The effect of different process parameters on milk quality attributes were evaluated using particle size, zeta potential, viscosity, pH, creaming, lipase activity, and protein profile. The HPP treatment did not cause apparent particle size reduction but increased the sample viscosity up to 3.08 mPa·s compared with 2.68 mPa·s for raw milk. Moreover, it produced varied effects on creaming and lipase activity depending on hold time. Thermal treatment induced slight reduction in particle size and creaming as compared with raw milk. The UST treatment at 35°C reduced the effective diameter of sample particles from 3,511.76 nm (raw milk) to 291.45 nm. This treatment also showed minimum relative lipase activity (29.93%) and kept milk stable by preventing creaming. The differential effects of pressure, shear, temperature, and their interactions were evident, which would be useful information for equipment developers and food processors interested in developing improved food processes for dairy beverages.

Effects of Lipid Solid Mass Fraction and Non-Lipid Solids on Crystallization Behaviors of Model Fats under High Pressure.

Different fractions of fully hydrogenated soybean oil (FHSBO) in soybean oil (10-30% w/w) and the addition of 1% salt (sodium chloride) were used to investigate the effect of high-pressure treatments (HP) on the crystallization behaviors and physical properties of the binary mixtures. Sample microstructure, solid fat content (SFC), thermal and rheological properties were analyzed and compared against a control sample (crystallized under atmospheric condition). The crystallization temperature (Ts) of all model fats under isobaric conditions increased quadratically with pressure until reaching a pressure threshold. As a result of this change, the sample induction time of crystallization (tc) shifted from a range of 2.74-0.82 min to 0.72-0.43 min when sample crystallized above the pressure threshold under adiabatic conditions. At the high solid mass fraction, the addition of salt reduced the pressure threshold to induce crystallization during adiabatic compression. An increase in pressure significantly reduced mean cluster diameter in relation to the reduction of tc regardless of the solid mass fraction. In contrast, the sample macrostructural properties (SFC, storage modulus) were influenced more significantly by solid mass fractions rather than pressure levels. The creation of lipid gel was observed in the HP samples at 10% FHSBO. The changes in crystallization behaviors indicated that high-pressure treatments were more likely to influence crystallization mechanisms at low solid mass fraction.

Effect of enzyme pretreatment in the ultrasound assisted extraction of finger millet polyphenols.

Polyphenols from plant sources are increasingly recognized as functional ingredients with multiple health benefits. Finger millet (Eleusine coracana), a major millet grown in Asia and Africa is a significant source of polyphenols. The extraction of polyphenols from millets which are under-utilized has received less research attention compared to other plant matrices. Therefore, the present study was carried out to identify an effective method of extracting the polyphenols from finger millet (v. GPU 28) seed coat (FMSC). Two eco friendly methods namely ultrasonication (UA) and enzyme treatment followed by ultrasonication (EUA) were compared with the conventional heat reflux method (HR). The polyphenolic profile and content along with the antioxidant potential of the extract were evaluated. Phenolic yield increased 2.3 fold using EUA with xylanase (XUA) compared to heat reflux extraction (HR). However, yield with UA was equivalent to the conventional method. Total flavonoids increased 1.4 fold in UA and 1.3 fold in XUA, similarly, tannins also showed a significant increase (1.1 fold in UA and 1.2 fold in XUA). FTIR spectra revealed the presence of all phenolic functional groups and ESI-MS showed 80% similarity in the individual polyphenols in the extracts. Catechins, luteolin and cyanidin were identified in the UA and XUA treated samples, whereas, shikimic acid derivatives- caffeoyl and di caffeoyl were present only in XUA extracts. This is the first report on enhanced extraction of polyphenols from FMSC using a combination of enzyme treatment and ultrasonication, providing a green technology for utilization of polyphenols in nutraceuticals and functional foods.

Effect of high pressure processing on dispersive and aggregative properties of almond milk.

BACKGROUND: A study was conducted to investigate the impact of high pressure (450 and 600 MPa at 30 °C) and thermal (72, 85 and 99 °C at 0.1 MPa) treatments on dispersive and aggregative characteristics of almond milk. Experiments were conducted using a kinetic pressure testing unit and water bath. Particle size distribution, microstructure, UV absorption spectra, pH and color changes of processed and unprocessed samples were analyzed. RESULTS: Raw almond milk represented the mono model particle size distribution with average particle diameters of 2 to 3 µm. Thermal or pressure treatment of almond milk shifted the particle size distribution towards right and increased particle size by five- to six-fold. Micrographs confirmed that both the treatments increased particle size due to aggregation of macromolecules. Pressure treatment produced relatively more and larger aggregates than those produced by heat treated samples. The apparent aggregation rate constant for 450 MPa and 600 MPa processed samples were k450MPa,30°C = 0.0058 s(-1) and k600MPa,30°C = 0.0095 s(-1) respectively. CONCLUSIONS: This study showed that dispersive and aggregative properties of high pressure and heat-treated almond milk were different due to differences in protein denaturation, particles coagulation and aggregates morphological characteristics. Knowledge gained from the study will help food processors to formulate novel plant-based beverages treated with high pressure. © 2015 Society of Chemical Industry.

Inactivation of Geobacillus stearothermophilus spores in low-acid foods by pressure-assisted thermal processing.

BACKGROUND: The effect of pressure-assisted thermal processing (PATP) on the inactivation of Geobacillus stearothermophilus spores was determined in deionized water, cooked ground beef, egg patty mince, whole milk and mashed potatoes at 105 °C under 500 and 700 MPa. RESULTS: The numbers of G. stearothermophilus spores in deionized water and milk were reduced by more than 6 log CFU mL(-1) at 700 MPa and 105 °C, whereas those in cooked beef were reduced by 4.27 log CFU g(-1). The inactivation patterns of G. stearothermophilus spores in all food matrices followed nonlinear behavior, showing that Weibull model fitted well to the inactivation curves of G. stearothermophilus spores in low-acid foods. CONCLUSION: The complex food matrices caused a protective effect on the inactivation of G. stearothermophilus spores during PATP. The results provide useful information in inactivation kinetics of bacterial spores for validating PATP-processed low-acid foods.

Ultrasound assisted extraction of red cabbage and encapsulation by freeze-drying: moisture sorption isotherms and thermodynamic characteristics of encapsulate.

In the present study encapsulation of ultrasound assisted red cabbage extract was carried out using four different carrier agents such as maltodextrin, gum arbic, xanthan gum, and gellan gum. Among the four hydrocolloids investigated, maltodextrin was found to have the least destructive effect on anthocyanin content (14.87 mg C3G/g dw), TPC (54.51 ± 0.09 mg GAE/g dw), TFC (19.82 Mg RE/g dw) and antioxidant activity (74.15%) upon freeze-drying. Subsequently a storage study was conducted using maltodextrin as carrier agent at 25-50 °C. The Clausius-Clapeyron equation was used to evaluate the net isosteric heat (qst) of water adsorption. The differential entropy (ΔS) and qst decreased from 82.298 to 38.628 J/mol, and 27.518 kJ/mol to 12.505 kJ/mol, respectively as the moisture content increased from 2 to 14%. The value of isokinetic energy and Gibb's free energy were found to be 364.88 and - 1.596 kJ/mol for freeze dried red cabbage.

Impact of ultra-shear technology on quality attributes of model dairy-pea protein dispersions with different fat levels.

This study investigated the impact of ultra-shear technology (UST) processing on dairy-pea protein dispersions with different fat levels. Raw milk, skim milk, and cream, as well as model dispersions with combinations of dairy products and pea protein (i.e., raw milk with pea protein, skim milk with pea protein, and cream with pea protein) were employed as test samples. UST experiments were conducted at a pressure of 400 MPa and 70 °C shear valve exit temperature. The UST treatment increased the viscosity of the dispersions and the increases depended on the fat level. Dairy-pea protein dispersions from raw milk and skim milk were shear thinning and mathematically described by the power-law model defined by the consistency coefficient, K (Pa·sn) and the flow behavior index, n. UST treated cream + pea protein dispersions produced structures with gel-like characteristics. Microstructure and particle size analysis determined by laser scanning microscope revealed a reduction in particle size after UST treatment in raw milk + pea protein and skim milk + pea protein dispersions up to 7.55 and 8.30 µm, respectively. In contrast, the particle mean diameter of cream + pea protein dispersions increased up to 77.20 µm after the UST treatment. Thus, the effect of UST on the particle size and rheological behavior of the dispersions depended on the fat level. UST-treated dispersions were stable with no visible phase separation or sedimentation upon centrifugation at 4000×g for 30 min (4 °C). Heat treatment and freeze-thaw treatment of UST-treated samples showed stable blends immediately after the treatments, but subsequent centrifugation showed solid separation. Results from the study suggest that UST is a potential technology to produce stable dairy + pea protein liquids foods with different rheological characteristics for diverse applications.

Superheated steam effectively inactivates diverse microbial targets despite mediating effects from food matrices in bench-scale assessments.

Sanitation in dry food processing environments is challenging due to the exclusion of water. Superheated steam (SHS) is a novel sanitation technique that utilizes high temperature steam to inactivate microorganisms. The high sensible heat of SHS prevents condensation on surfaces. Here we evaluated SHS thermal inactivation of various vegetative and spore forming bacteria and fungi and determined the effect of food matrix composition on SHS efficacy. Capillary tubes with vegetative cells (Salmonella, E. coli O157:H7, Listeria monocytogenes, or Enterococcus faecium), Aspergillus fischeri ascospores, or B. cereus spores (100 µL) were SHS treated at 135 ± 1 °C for 1 or 2 s. After 1 s, SHS achieved a reduction of 10.91 ± 0.63 log10 CFU/mL for vegetative cells, 2.09 ± 0.58 log10 ascospores/mL for A. fischeri, and 0.21 ± 0.10 log10 spores/mL for B. cereus. SHS treatment achieved significant reductions in vegetative cells and fungal ascospores (p < 0.05), however B. cereus spores were not significantly reduced after 2 s and were determined to be the most resistant of the cell types evaluated. Consequently, peanut butter compositions (peanut powder, oil, and water) and milk powder (whole and nonfat) inoculated with B. cereus spores on aluminum foil coupons (2 × 3 × 0.5 cm) were tested. The D161°C values for B. cereus spores ranged from 46.53 ± 4.48 s (6 % fat, 55 % moisture, aw: 0.927) to 79.21 ± 14.87 s (43 % fat, 10 % moisture, aw: 0.771) for various peanut butter compositions. Whole milk powder had higher D161°C (34.38 ± 20.90 s) than nonfat milk powder (24.73 ± 6.78 s). SHS (135 ± 1 °C) rapidly (1 s) inactivated most common vegetative bacterial cells; however B. cereus spores were more heat resistant. B. cereus spore inactivation was significantly affected by product composition (p < 0.05). Compared to the log-linear model (R2 0.81-0.97), the Weibull model had better fit (R2 0.94-0.99). Finally, the ease of peanut butter removal from surfaces increased while the ease of non-fat dry milk removal decreased with the increasing SHS treatment duration. However, allergen residues were detectable on surfaces regardless of SHS treatment. The findings from this study can inform the development of pilot-scale research on SHS.

Current concepts and clinical importance of glycemic variability.

BACKGROUND AND AIMS: Evolving evidence indicate that variations in blood glucose levels are likely to be an important factor in developing diabetic complications. Monitoring glucose fluctuations in patients remains as a therapeutic challenge and more evidence needs to be created in order to bring GV into limelight. This review encapsulates the most important findings conducted and discusses on them to provide readers a better understanding on this emerging subject. METHODS: Keyword-based comprehensive desktop search was conducted to gather the relevant literature. Triple-stage cascade type content analysis of the literature was conducted to draw relevant themes of discussions. RESULTS: High glycemic variability is associated with an increased risk of development of diabetic complications especially in cardiac conditions. The widely used and accepted metrics to determine the variations in blood glucose are Standard deviation (SD), MAGE (Mean amplitude of glycemic excursions) and MODD (Mean of daily differences). Occurrence of blood glucose variations affects at a molecular level thereby causing more harm than the occurrence of hyperglycemia alone. CONCLUSION: Available data suggest that Glycemic Variability should be used as an additional marker of glycemia. Additional research globally, and in India are required.

Inactivation of Bacillus amyloliquefaciens spores by a combination of sucrose laurate and pressure-assisted thermal processing.

The aim of this research was to study the effect of sucrose laurate ester (SL) on enhancing pressure-assisted thermal processing (PATP) inactivation of Bacillus amyloliquefaciens Fad 82 spores. B. amyloliquefaciens spores (∼108 CFU/ml) were suspended in deionized water, solutions of 0.1, 0.5, and 1.0% SL, and mashed carrots without or with 1% SL. Samples were treated at 700 MPa and 105°C for 0 (come-up time), 1, 2, and 5 min and analyzed by pour-plating and most-probable-number techniques. Heat shock (80°C, 10 min) was applied to untreated and treated samples to study the germination rates. Results were also compared against samples treated by high pressure processing (700 MPa, 35°C) and thermal processing (105°C, 0.1 MPa). Among the combinations tested, SL at concentrations of 1.0% showed the best synergistic effect against spores of B. amyloliquefaciens when combined with PATP treatments. In the case of high pressure and thermal processing treatments, SL did not enhance spore inactivation at the conditions tested. These results suggest that SL is a promising antimicrobial compound that can help reduce the severity of PATP treatments.

Carotenoid composition and antioxidant potential of Eucheuma denticulatum, Sargassum polycystum and Caulerpa lentillifera.

Three species of Malaysian edible seaweed (Eucheuma denticulatum, Sargassum polycystum and Caulerpa lentillifera) were analyzed for their carotenoid composition using a combination of high-performance thin layer chromatography (HPTLC) and ultra-high-performance liquid chromatography-electrospray ionization-tandem mass spectrometry (UHPLC-ESI-MS/MS), while the antioxidant capacities were determined by 2,2-diphenyl-1-picrylhydrazyl (DPPH) and oxygen radical absorbance capacity (ORAC) assays. The HPTLC analysis exhibited a distinct carotenoid pattern among the three seaweed groups. The UHPLC-ESI-MS/MS analysis showed fucoxanthin as the major carotenoid present in S. polycystum while lutein and zeaxanthin in E. denticulatum. For C. lentillifera, ß-carotene and canthaxanthin were the major carotenoids. Some of the carotenoids, such as rubixanthin, dinoxanthin, diatoxanthin and antheraxanthin, were also tentatively detected in E. denticulatum and S. polycystum. For antioxidant activity, S. polycystum (20 %) and E. denticulatum (1128 µmol TE/g) showed the highest activity in the DPPH and ORAC assays, respectively. The findings suggest the three edible varieties of seaweeds may provide a good dietary source with a potential to reduce antioxidative stress.

Influence of pressurization rate and pressure pulsing on the inactivation of Bacillus amyloliquefaciens spores during pressure-assisted thermal processing.

Pressure-assisted thermal processing (PATP) is an emerging sterilization technology in which a combination of pressure (500 to 700 MPa) and temperature (90 to 120 degrees C) are used to inactivate bacterial spores. The objective of this study was to examine the role of pressurization rate and pressure pulsing in enhancing PATP lethality to the bacterial spore. Bacillus amyloliquefaciens TMW 2.479 spore suspensions were prepared in deionized water at three inoculum levels (1.1 x 10(9), 1.4 x 10(8), and 1.3 x 10(6) CFU/ml), treated at two pressurization rates (18.06 and 3.75 MPa/s), and held at 600 MPa and 105 degrees C for 0, 0.5, 1, 2, 3, and 5 min. Experiments were carried out using custom-fabricated, high-pressure microbial kinetic testing equipment. Single and double pulses with equivalent pressure-holding times (1 to 3 min) were investigated by using the spore suspension containing 1.4 x 10(8) CFU/ml. Spore survivors were enumerated by pour plating, using Trypticase soy agar after incubation at 32 degrees C for 2 days. During short pressure-holding times (< or = 2 min), PATP treatment with the slow pressurization rate provided enhanced spore reduction over that of the fast pressurization rate. However, these differences diminished with extended pressure-holding times. After a 5-min pressure-holding time, B. amyloliquefaciens population decreased about 6 log CFU/ml, regardless of pressurization rate and inoculum level. Double-pulse treatment enhanced PATP spore lethality by approximately 2.4 to 4 log CFU/ml, in comparison to single pulse for a given pressure-holding time. In conclusion, pressure pulsing considerably increases the efficacy of PATP treatment against bacterial spores. Contribution of pressurization rate to PATP spore lethality varies with duration of pressure holding.

High-pressure processing of Turkish white cheese for microbial inactivation.

High-pressure processing (HPP) of Turkish white cheese and reduction of Listeria monocytogenes, total Enterobacteriaceae, total aerobic mesophilic bacteria, total molds and yeasts, total Lactococcus spp., and total Lactobacillus spp. were investigated. Cheese samples were produced from raw milk and pasteurized milk and were inoculated with L. monocytogenes after brining. Both inoculated (ca. 10(7) to 10(8) CFU/g) and noninoculated samples were subjected to HPP in a high-pressure food processor at 50 to 600 MPa for 5 and 10 min at 25 degrees C. Reductions in L. monocytogenes, total aerobic mesophilic bacteria, Lactococcus spp., and Lactobacillus spp. in both pasteurized- and raw-milk cheese samples and reductions in total molds and yeasts and total Enterobacteriaceae counts in raw-milk cheese samples increased with increased pressure (P < or = 0.05). The maximum reduction of the L. monocytogenes count, ca. 4.9 log CFU/g, was obtained at 600 MPa. Because of the highly inhibitory effect of pasteurization, the total molds and yeasts and total Enterobacteriaceae counts for the cheese samples produced from pasteurized milk were below the detection limit both before and after HPP. There was no significant difference in inactivation of L. monocytogenes, total aerobic mesophilic bacteria, Lactococcus spp., and Lactobacillus spp. under the same treatment conditions for the raw milk and pasteurized milk cheeses and for 5- and 10-min treatment times (P > 0.05). No significant change was detected in pH or water activity of the samples before and after HPP. Our findings suggest that HPP can be used effectively to reduce the microbial load in Turkish white cheese.

Postmortem brain MRI with selective tissue biopsy as an adjunct to autopsy following neonatal encephalopathy.

Following the death of a neonate it is essential that parents are given full and accurate information about the probable cause of death. Perinatal autopsy often adds new information or may even change the presumed diagnosis [Cartlidge PH, Dawson AT, Stewart JH, Vujanic GM. Value and quality of perinatal and infant postmortem examinations: cohort analysis of 400 consecutive deaths. Br Med J 1995;310(6973):155-8; Khong TY. Falling neonatal autopsy rates. Br Med J 2002;324(7340):749-50] informing decisions regarding the management of any future pregnancy. Autopsy can be considered the "gold standard" for the identification of antecedent events leading to a neonatal death. However, recent events in the UK have added to an already declining rate in neonatal autopsies [Brodlie M, Laing IA. Ten years of neonatal autopsies in tertiary referral centre: retrospective study. Br Med J 2002;324(7340):761-3]. To try and redress this balance the Chief Medical Officer has recommended that research should be commissioned into the use of non-invasive imaging to provide a similar standard of information [The Chief Medical Officer. The removal, retention and use of human organs and tissues from post mortem examination. London, England: The Stationary Office, Department of Health; 2001]. Previous publications on postmortem MRI have focused largely on investigation of the foetus and of still birth [Griffiths PD, Variend D, Evans M, Jones A, Wilkinson ID, Paley MNJ, et al. Postmortem MR imaging of the fetal and stillborn central nervous system. Am J Neuroradiol 2003;24(1):22-7; Whitby EH, Paley MN, Cohen M, GriffithsPD. Postmortem MR imaging of the fetus: an adjunct or a replacement for conventional autopsy? Semin Fetal Neonatal Med 2005;10(5):475-83]. We report our experience on the use of postmortem brain MRI combined with selective tissue biopsy, in six neonatal deaths in the setting of a large district general hospital.

Inactivation kinetics of selected aerobic and anaerobic bacterial spores by pressure-assisted thermal processing.

The combined pressure-thermal inactivation kinetics of spores from three strains of anaerobic (Clostridium sporogenes, C. tyrobutylicum, and Thermoanaerobacterium thermosaccharolyticum), and six strains of aerobic (Bacillus amyloliquefaciens and B. sphaericus) bacteria were studied. Spores of these bacteria were prepared in deionized water and treated in a custom-made kinetic tester over various pressure (0.1 and 700 MPa) and thermal (105 and 121 degrees C) combinations. Survivor data were modeled using log-linear and Weibull models to obtain relevant kinetic parameters. In comparison to thermal treatment alone, the combined pressure-thermal conditions accelerated the inactivation of the spores tested. A measurable fraction of spore populations was inactivated during the pressure come-up time. Pressure-assisted thermal processing (PATP) at 700 MPa and 121 degrees C for 1 min inactivated up to 7-8 log for some of spores tested. Among bacteria evaluated, based on survivor curve data T. thermosaccharolyticum, B. amyloliquefaciens Fad 82, and Fad 11/2 were found to produce the most PATP-resistant spores. PATP inactivation plots showed characteristic upward curvature, which is indicative of the tailing behavior. Since both log-linear and Weibull kinetic models did not consider microbial reduction during process come-up time, our results demonstrated that the estimated model parameters were not adequate to compare combined pressure-thermal resistance of various bacterial spores tested.

Monitoring biochemical changes in bacterial spore during thermal and pressure-assisted thermal processing using FT-IR spectroscopy.

Pressure-assisted thermal processing (PATP) is being widely investigated for processing low acid foods. However, its microbial safety has not been well established and the mechanism of inactivation of pathogens and spores is not well understood. Fourier transform infrared (FT-IR) spectroscopy was used to study some of the biochemical changes in bacterial spores occurring during PATP and thermal processing (TP). Spore suspensions (approximately 10(9) CFU/mL of water) of Clostridium tyrobutyricum, Bacillus sphaericus, and three strains of Bacillus amyloliquefaciens were treated by PATP (121 degrees C and 700 MPa) for 0, 10, 20, and 30 s and TP (121 degrees C) for 0, 10, 20, and 30 s. Treated and untreated spore suspensions were analyzed using FT-IR in the mid-infrared region (4000-800 cm(-1)). Multivariate classification models based on soft independent modeling of class analogy (SIMCA) were developed using second derivative-transformed spectra. The spores could be differentiated up to the strain level due to differences in their biochemical composition, especially dipicolinic acid (DPA) and secondary structure of proteins. During PATP changes in alpha-helix and beta-sheets of secondary protein were evident in the spectral regions 1655 and 1626 cm(-1), respectively. Infrared absorption bands from DPA (1281, 1378, 1440, and 1568 cm(-1)) decreased significantly during the initial stages of PATP, indicating release of DPA. During TP changes were evident in the bands associated with secondary proteins. DPA bands showed little or no change during TP. A correlation was found between the spore's Ca-DPA content and its resistance to PATP. FT-IR spectroscopy could classify different strains of bacterial spores and determine some of the changes occurring during spore inactivation by PATP and TP. Furthermore, this technique shows great promise for rapid screening PATP-resistant bacterial spores.

Physiological responses of Bacillus amyloliquefaciens spores to high pressure.

Pressure inactivation behavior of Bacillus amyloliquefaciens spores was investigated in deionized water. The spores of B. amyloliquefaciens were subjected to 105 degrees C and 700 MPa. The magnitude of the decrease in viability after pressure treatment was similar to that after pressure treatment followed by heat shock. The increase of dipicolinic acid (DPA) release was correlated with the spore inactivation, and the hydrophobicity did not significantly change during the pressure-assisted thermal processing (PATP). Lag phase duration increased with increasing pressure process time. The mechanisms of spore germination and inactivation during the PATP were related to a complex physiological process.

Effects of inoculum level and pressure pulse on the inactivation of Clostridium sporogenes spores by pressure-assisted thermal processing.

The effects of initial concentration and pulsed pressurization on the inactivation of Clostridium sporogenes spores suspended in deionized water were determined during thermal processing (TP; 105 degrees C, 0.1 MPa) and pressure-assisted thermal processing (PATP; 105 degrees C and 700 MPa) treatments for 40 min and 5 min holding times, respectively. Different inoculum levels (10(4), 10(6), and 10(8) CFU/ml) of C. sporogenes spores suspended in deionized water were treated at 105 degrees C under 700 MPa with single, double, and triple pulses. Thermally treated samples served as control. No statistical significances (p > 0.05) were observed among all different inoculum levels during the thermal treatment, whereas the inactivation rates (k1 and k2) were decreased with increasing the initial concentrations of C. sporogenes spores during the PATP treatments. Double- and triple-pulsed pressurization reduced more effectively the number of C. sporogenes spores than single-pulse pressurization. The study shows that the spore clumps formed during the PATP may lead to an increase in pressure-thermal resistance, and multiple-pulsed pressurization can be more effective in inactivating bacterial spores. The results provide an interesting insight on the spore inactivation mechanisms with regard to inoculum level and pulsed pressurization.

Optimization of anthocyanins extraction from black carrot pomace with thermosonication.

A study was conducted to identify optimal ultrasound processing conditions (ultrasound energy density and temperature) to maximize the extraction of anthocyanin colorants from black carrot pomace. The treatment maximized the yield of five different anthocyanin compounds from black carrot pomace with cyanidin-3-xyloside-galactoside-glucoside-ferrulic acid (C3XGGF, 60.85-74.22mg/L) as the most abundant anthocyanin compound, followed by cyanidin-3-xyloside-galactoside (C3XG, 49.56-70.12mg/L). The response surface models predicted that if extraction conditions were conducted at 183.1J/g energy density and 50°C, the yield of various anthocyanin compounds would be maximized from the black carrot pomace. Response surface models were developed correlating anthocyanin yield with ultrasonication treatment parameters. The study showed the synergy of combining ultrasonication and temperature for the extraction of anthocyanin pigments from black carrot pomace. Results of the study also further demonstrate the potential of ultrasonication technology as a tool for the extraction of valuable components waste products from fruits and vegetables juice industry.

High-Pressure Processing of Broccoli Sprouts: Influence on Bioactivation of Glucosinolates to Isothiocyanates.

Effects of high-pressure processing (HPP, 100-600 MPa for 3 min at 30 °C) on the glucosinolate content, conversion to isothiocyanates, and color changes during storage in fresh broccoli sprouts were investigated. A mild heat treatment (60 °C) and boiling (100 °C) were used as positive and negative controls, respectively. Glucosinolates were quantified using liquid chromatography-mass spectrometry, and isothiocyanates were quantified using high-performance liquid chromatography-photodiode array detection. A formation of isothiocyanates was observed in all high-pressure-treated sprouts. The highest degree of conversion (85%) was observed after the 600 MPa treatment. Increased isothiocyanate formation at 400-600 MPa suggests an inactivation of the epithiospecifier protein. During storage, color changed from green to brownish, reflected by increasing a* values and decreasing L* values. This effect was less pronounced for sprouts treated at 100 and 600 MPa, indicating an influence on the responsible enzymes. In summary, HPP had no negative effects on the glucosinolate-myrosinase system in broccoli sprouts.