Time to optimize vaccination strategies in blood cancer patients.

Immune response to vaccinations is dampened in patients with indolent lymphomas due to disease and treatment-related factors. The study by Lim et al. demonstrated impaired humoral response but intact cellular response to the SARS-CoV2 vaccine in patients with follicular lymphoma receiving front-line therapy. The results highlight the importance of several factors in predicting immune response to vaccination and provide estimates of immune response for different clinical scenarios and treatment points. Commentary on: Lim et al. Immunogenicity of COVID-19 vaccines in patients with follicular lymphoma receiving frontline chemoimmunotherapy. Br J Haematol 2024 (Online ahead of print). doi: 10.1111/bjh.19562.

Long-term follow-up for the development of subsequent malignancies in patients treated with genetically modified IECs.

Subsequent malignancies are well-documented complications in long-term follow-up of cancer patients. Recently, genetically modified immune effector (IE) cells have shown benefit in hematologic malignancies and are being evaluated in clinical trials for solid tumors. Although the short-term complications of IE cells are well described, there is limited literature summarizing long-term follow-up, including subsequent malignancies. We retrospectively reviewed data from 340 patients treated across 27 investigator-initiated pediatric and adult clinical trials at our center. All patients received IE cells genetically modified with γ-retroviral vectors to treat relapsed and/or refractory hematologic or solid malignancies. In a cumulative 1027 years of long-term follow-up, 13 patients (3.8%) developed another cancer with a total of 16 events (4 hematologic malignancies and 12 solid tumors). The 5-year cumulative incidence of a first subsequent malignancy in the recipients of genetically modified IE cells was 3.6% (95% confidence interval, 1.8% to 6.4%). For 11 of the 16 subsequent tumors, biopsies were available, and no sample was transgene positive by polymerase chain reaction. Replication-competent retrovirus testing of peripheral blood mononuclear cells was negative in the 13 patients with subsequent malignancies tested. Rates of subsequent malignancy were low and comparable to standard chemotherapy. These results suggest that the administration of IE cells genetically modified with γ retroviral vectors does not increase the risk for subsequent malignancy.

Radiation hazards of the Ukraine nuclear power plants: how can international blood and marrow stem cell transplant societies help?

Any conflict in countries that process nuclear power plants raises concerns of the potential radiation injuries to the people in that region and beyond such as the current conflict in Ukraine. International healthcare organizations and societies should prepare for the potential scenarios of nuclear incidents. The Worldwide Network for Blood and Marrow Transplantation (WBMT) and its members, have recent experience preparing for this type of events such as the Fukushima incident in 2011. In this article, we discuss the risks of radiation exposure, current guidelines, and scientific evidence on hematopoietic support, including the role of hematopoietic stem cell transplant (HCT) for those exposed to nuclear radiation, and the role that the WBMT and other global BMT societies can play in triaging and managing people suffering from radiation injuries.

Properties of a novel composite elastomeric polymer vinyl polyether siloxane in comparison to its parent materials: a systemic review and meta-analysis.

BACKGROUND: The effectiveness of newly developed elastomeric polymer hybrid siloxane (PVES), which combines the properties of polyethylene (PE) and polyvinyl siloxane (PVS) elastomers, has been a subject of interest in recent studies. This study aimed to assess the physical properties of hybrid PVES materials by analyzing existing data from recent studies on this topic. METHODS: A systematic literature search was conducted to retrieve peer-reviewed articles published up to February 5, 2023. The population, intervention, comparison, and pertinent outcomes were specified under the PICO framework. The primary data analysis was performed in Microsoft Excel, while statistical analysis used Meta-Essentials. RESULTS: Of the 1152 articles assessed, 14 met the inclusion criteria. The meta-analysis of the selected studies indicated that polyether (PE) and polyvinyl siloxane (PVS) were highly correlated (two-tailed p-values of 0.000 and 0.001, respectively) with the improved tensile strength of vinyl polyether siloxane (PVES) with a significantly positive effect size. Similarly, the hydrophilic characteristics of PVES were significantly improved compared to those of PE and PVS. PE was a significant contributor to the hydrophilic characteristics of PVES, with a two-tailed p-value of 0.000. The effect size was highly positive for hydrophilicity but showed high heterogeneity. It was also observed that the dimensional accuracy of PVES was comparable to those of PE and PVS, with no statistically significant differences among the three materials. CONCLUSIONS: PVES showed promising features, with improved tensile strength and hydrophilic characteristics compared to those of PE and PVS.

Dental biomaterials redefined: molecular docking and dynamics-driven dental resin composite optimization.

BACKGROUND: Dental resin-based composites are widely recognized for their aesthetic appeal and adhesive properties, which make them integral to modern restorative dentistry. Despite their advantages, adhesion and biomechanical performance challenges persist, necessitating innovative strategies for improvement. This study addressed the challenges associated with adhesion and biomechanical properties in dental resin-based composites by employing molecular docking and dynamics simulation. METHODS: Molecular docking assesses the binding energies and provides valuable insights into the interactions between monomers, fillers, and coupling agents. This investigation prioritizes SiO2 and TRIS, considering their consistent influence. Molecular dynamics simulations, executed with the Forcite module and COMPASS II force field, extend the analysis to the mechanical properties of dental composite complexes. The simulations encompassed energy minimization, controlled NVT and NPT ensemble simulations, and equilibration stages. Notably, the molecular dynamics simulations spanned a duration of 50 ns. RESULTS: SiO2 and TRIS consistently emerged as influential components, showcasing their versatility in promoting solid interactions. A correlation matrix underscores the significant roles of van der Waals and desolvation energies in determining the overall binding energy. Molecular dynamics simulations provide in-depth insights into the mechanical properties of dental composite complexes. HEMA-SiO2-TRIS excelled in stiffness, BisGMA-SiO2-TRIS prevailed in terms of flexural strength, and EBPADMA-SiO2-TRIS offered a balanced combination of mechanical properties. CONCLUSION: These findings provide valuable insights into optimizing dental composites tailored to diverse clinical requirements. While EBPADMA-SiO2-TRIS demonstrates distinct strengths, this study emphasizes the need for further research. Future investigations should validate the computational findings experimentally and assess the material's response to dynamic environmental factors.

Evaluation of the effect of chemical disinfection and ultraviolet disinfection on the dimensional stability of polyether impression material: an in-vitro study.

BACKGROUND: Various methods, chemical and physical, disinfect dental impressions. Common chemicals include 1% Sodium Hypochlorite and 2% glutaraldehyde, while UV radiation is a prevalent physical method. Few studies compare their effects on dimensional stability in polyether impressions. This study aims to assess such stability using different disinfection methods. Therefore, this study was planned to evaluate the dimensional stability of polyether impression material using different disinfection methods. METHODS: This in vitro study compared the effects of chemical disinfectants (1% Sodium Hypochlorite and 2% glutaraldehyde) and UV irradiation on the dimensional stability of polyether impression material. Groups A, B, C, and D, each with ten samples (N = 10), were studied. Group A was untreated (control). Group B was treated with 2% glutaraldehyde for 20 min, Group C with 1% Sodium Hypochlorite for 20 min, and Group D with UV rays for 20 min. A pilot milling machine drill was used to make four parallel holes labeled A, B, C, and D in the anterior and premolar regions from right to left. After sequential drilling, four implant analogs were positioned using a surveyor for accuracy. Ten open-tray polyether impressions were made and treated as described in the groups, followed by pouring the corresponding casts. Distortion values for each disinfection method were measured using a coordinate measuring machine capable of recording on the X- and Y-axes. RESULTS: A comprehensive analysis was conducted using the one-way ANOVA test for distinct groups labeled A, B, C, and D, revealing significant differences in the mean distances for X1, X2, X4, X5, and X6 among the groups, with p-values ranging from 0.001 to 0.000. However, no significant differences were observed in X3. Notably, mean distances for the Y variables exhibited substantial differences among the groups, emphasizing parameter variations, with p-values ranging from 0.000 to 0.033. The results compared the four groups using the one-way ANOVA test, revealing statistically significant distance differences for most X and Y variables, except for X3 and Y4. Similarly, post-hoc Tukey's tests provided specific pairwise comparisons, underlining the distinctions between group C and the others in the mean and deviation distances for various variables on both the X- and Y-axes. CONCLUSIONS: This study found that disinfection with 1% sodium hypochlorite or UV rays for 20 min maintained dimensional stability in polyether impressions.

Review of MR spectroscopy analysis and artificial intelligence applications for the detection of cerebral inflammation and neurotoxicity in Alzheimer's disease.

INTRODUCTION: Magnetic resonance spectroscopy (MRS) has an emerging role as a neuroimaging tool for the detection of biomarkers of Alzheimer's disease (AD). To date, MRS has been established as one of the diagnostic tools for various diseases such as breast cancer and fatty liver, as well as brain tumours. However, its utility in neurodegenerative diseases is still in the experimental stages. The potential role of the modality has not been fully explored, as there is diverse information regarding the aberrations in the brain metabolites caused by normal ageing versus neurodegenerative disorders. MATERIALS AND METHODS: A literature search was carried out to gather eligible studies from the following widely sourced electronic databases such as Scopus, PubMed and Google Scholar using the combination of the following keywords: AD, MRS, brain metabolites, deep learning (DL), machine learning (ML) and artificial intelligence (AI); having the aim of taking the readers through the advancements in the usage of MRS analysis and related AI applications for the detection of AD. RESULTS: We elaborate on the MRS data acquisition, processing, analysis, and interpretation techniques. Recommendation is made for MRS parameters that can obtain the best quality spectrum for fingerprinting the brain metabolomics composition in AD. Furthermore, we summarise ML and DL techniques that have been utilised to estimate the uncertainty in the machine-predicted metabolite content, as well as streamline the process of displaying results of metabolites derangement that occurs as part of ageing. CONCLUSION: MRS has a role as a non-invasive tool for the detection of brain metabolite biomarkers that indicate brain metabolic health, which can be integral in the management of AD.

Challenges and opportunities in shared care for international patients treated with cellular therapy for nonmalignant disease.

As cellular therapies gradually become the mainstay of treatment for several nonmalignant diseases, there appears to be varied accessibility to these therapies globally. Despite considerable burden of nonmalignant conditions, such as sickle cell disease, thalassemia, and aplastic anemia in populations of low-middle-income countries, the utilization of cellular therapies remain sparse because of lack of resources. Globally, the frequency of hematopoietic stem cell transplant (HSCT) has increased disproportionately in countries with higher gross national income (GNI) per capita, governmental healthcare expenditures, and a high human development index. This leads to a large subset of international patients seeking care in the United States. This review summarizes the unique set of challenges that often arise when offering sophisticated therapies such as HSCT to international patients constituting of cross-cultural, logistical, financial, and medical challenges and the opportunities that are available to bridge the gap.

Machine learning applications and challenges in graft-versus-host disease: a scoping review.

PURPOSE OF REVIEW: This review delves into the potential of artificial intelligence (AI), particularly machine learning (ML), in enhancing graft-versus-host disease (GVHD) risk assessment, diagnosis, and personalized treatment. RECENT FINDINGS: Recent studies have demonstrated the superiority of ML algorithms over traditional multivariate statistical models in donor selection for allogeneic hematopoietic stem cell transplantation. ML has recently enabled dynamic risk assessment by modeling time-series data, an upgrade from the static, "snapshot" assessment of patients that conventional statistical models and older ML algorithms offer. Regarding diagnosis, a deep learning model, a subset of ML, can accurately identify skin segments affected with chronic GVHD with satisfactory results. ML methods such as Q-learning and deep reinforcement learning have been utilized to develop adaptive treatment strategies (ATS) for the personalized prevention and treatment of acute and chronic GVHD. SUMMARY: To capitalize on these promising advancements, there is a need for large-scale, multicenter collaborations to develop generalizable ML models. Furthermore, addressing pertinent issues such as the implementation of stringent ethical guidelines is crucial before the widespread introduction of AI into GVHD care.

Long term outcomes in older patients with primary central nervous system lymphoma: an analysis of the Texas Cancer Registry.

Primary central nervous system lymphoma (PCNSL) is an aggressive subtype of non-Hodgkin lymphoma that carries a poor prognosis in the elderly. The aim of this study is to investigate treatment patterns and survival trends in patients ≥ 65 years with PCNSL through data provided by the Texas Cancer Registry. Adults ≥ 65 years diagnosed with PCNSL and followed between 1995-2017 were identified and separated into three eras: 1995-2003, 2004-2012, and 2013-2017. Baseline covariates compared included patient demographics and treatments administered. Pearson's chi-squared test and Cox proportional hazard models compared covariates; overall survival (OS) and disease-specific survival (DSS) were assessed via Kaplan-Meier methodology. There were 375 patients; 104 (27.7%) in 1995-2003, 146 (38.9%) in 2004-2012, and 125 (33.3%) in 2013-2017. There were 50 (48.1%), 55 (37.7%), and 31 (24.8%) in 1995-2003, 2004-2012, and 2013-2017, respectively, that did not receive treatment. At last follow up, 101 (97.1%), 130 (89.0%), and 94 (75.2%) in each era died, of which 89 (85.6%), 112 (76.7%), and 70 (56.0%) were attributed to PCNSL. Median OS per era was eight (95% confidence interval [CI] 5.06-10.93), six (95% CI, 2.30-9.69), and five months (95% CI, 2.26-7.73) (p = 0.638). DSS per era was nine (95% CI: 0.00, 26.53), 10 (95% CI: 5.14, 14.86), and 19 (95% CI, 0.00-45.49) (p = 0.931) months. Spinal cord as primary disease site (HR: 0.668 [95% CI, 0.45-0.99], p = 0.049), and chemotherapy (HR 0.532 [95% CI, 0.42-0.673], p = < 0.001) or chemotherapy + radiation (HR, 0.233 [95% CI, 0.11-0.48] p < 0.001) had better outcomes compared to no therapy or radiation therapy alone. Survival in older patients ≥ 65 with PCNSL has not improved per our analysis of the TCR from 1995-2017 despite increasing trends of treatment utilization. Strategies to augment recruitment of older individuals in trials are needed in order to determine who would derive treatment benefit and minimize treatment toxicities.

Parasitic infections in hematopoietic stem cell transplant recipients.

INTRODUCTION: Hematopoietic stem cell transplantation (HSCT) is a vital treatment for various hematological disorders. However, HSCT recipients face increased risks of infectious complications due to immunosuppression. Parasitic infections are a significant concern in this vulnerable population and can lead to substantial morbidity and mortality. This review examines parasitic infections in HSCT recipients, focusing on major infections affecting different organ systems, including intestinal parasites (Giardia spp., Entamoeba histolytica, and Cryptosporidium spp.), hematologic parasites (Plasmodium spp. and Babesia spp.), and tissue/visceral parasites (Toxoplasma gondii, Leishmania spp., and Trypanosoma cruzi). METHODS: A systematic search of relevant literature was conducted and included studies up to August 2023. Databases included PubMed, Google Scholar, were queried using specific keywords related to parasitic infections in HSCT patients. The epidemiology, risk factors, clinical presentation, diagnostic methods, and treatment approaches for each infection were evaluated. RESULTS AND CONCLUSION: Knowing the epidemiology, risk factors, and clinical presentations are crucial for timely intervention and successful management. By emphasizing early detection, effective therapies, and the unique challenges posed by each of these infections, this review highlights the importance of tailored strategies for HSCT recipients. Future research can further refine management protocols to enhance care and outcomes for these patients.

Prevalence of temporomandibular disorders among psychoactive substances abusers: A systematic review and meta-analysis.

INTRODUCTION: The COVID-19 pandemic has had a significant impact on substance abuse patterns in recent times. Many people have experienced increased stress, anxiety, and social isolation, which has led to higher rates of substance abuse and addiction. It impacts on the orofacial region, particularly temporomandibular joint (TMJ). This review was undertaken to assess the association between substance abuse and temporomandibular disorders. (TMDs). MATERIALS AND METHODS: The databases of PubMed, Google Scholar, Web of Science and Cochrane were searched for articles based of set PECO criteria. A comprehensive search using keywords of "Psychoactive substances", "Illegal substances", "substance abuse", "narcotics", "temporomandibular joint" and "temporomandibular joint disorders" yielded a total of 1405 articles. Modified Newcastle-Ottawa Scale for observational studies assessed the risk of bias of included studies. RESULTS: Two studies were reviewed. Samples recruited were either from rehabilitation centres or prisoners and fell in the second to fourth decade. A definite association was noted between psychoactive substance and TMDs. Moderate to low risk of bias was noted in all the studies evaluated. CONCLUSION: Further research is needed to better understand the nature of this relationship and the underlying mechanisms involved. It is important for healthcare providers to be aware of this potential association and to screen for substance abuse in patients with TMD symptoms.

Effect of chemical disinfection on the dimensional stability of polyvinyl ether siloxane impression material: a systemic review and meta-analysis.

BACKGROUND AND OBJECTIVES: Polyvinyl ether siloxane (PVES) possesses ideal characteristics for making precise and accurate dental impressions. PVES dimensional stability owes to its better polymeric properties derived from its parent materials poly ethers and polyvinyl siloxanes. As recommended use of chemical disinfecting agents is getting more popular, there is a growing concern associated with the effect of disinfectants on PVES dimensional stability. This study was aimed to understand the PVES behavior when subjected to chemical disinfectants. MATERIALS AND METHODOLOGY: The data was collected from research studies retrieved from Google Scholar, Scopus, and PubMed using MeSH terms of keywords "vinyl polyether siloxane AND Disinfection" or (Vinyl polyether siloxane OR polyvinyl siloxane ether OR PVES) AND (disinfectant OR disinfection)" without any restriction to publication date. The PRISMA (Preferred Reporting Items for Systemic Review and Meta-Analysis) directions were observed during the data collection, screening of studies, and meta-analysis. The primary data were retrieved, and batch exported from databases using Harzing's Publish or Perish software; primary analysis was performed in Microsoft Excel, while statistical analysis for effect size, two-tailed p-values, and heterogeneity among studies was performed using Meta Essentials. The effect size was calculated using Hedge's g values at the 95% confidence level using the random-effects model. Heterogeneity among studies was measured using the Cochrane Q and I2. RESULTS AND CONCLUSION: Dental impressions made from the PVES elastomeric impression materials showed no significant changes in dimensional stability. Immersion in the chemical disinfectant for 10 min was associated with clinically irrelevant changes in the dimensions of the PVES impressions. Disinfection with sodium hypochlorite was associated with clinically significant changes in dimensions, with a two-tailed p-value of 0.049. Disinfection with 2-2.5% glutaraldehyde solution was not associated with any significant dimensional variability.

Comparative evaluation of open tray impression technique: investigating the precision of four splinting materials in multiple implants.

BACKGROUND: This study aimed to determine the relative positioning accuracy of multiple implants utilizing four distinct types of splinting materials. METHODS: The purpose of this in-vitro study was to compare the precision of four splinting materials in an open tray impression technique in multiple implant situations. Based on the material used for splinting, four groups were made (n = 40)- Group A: Conventional Method, Group B: Prefabricated Pattern Resin Framework, Group C: Prefabricated Metal Framework, Group D: Light Cured Pattern Resin, these groups were compared with the master model. A heat-cured clear acrylic resin and a master model were constructed. A pilot milling machine drill was used to drill four parallel holes in the anterior and premolar regions, which were later labeled as A, B, C, and D positions from right to left. Then, sequential drilling was carried out, and four 3.75­mm diameter and 13-mm long ADIN implant analogs with internal hex were placed in the acrylic model using a surveyor for proper orientation. The impression posts were then manually screwed to the implant analogs using an open tray, and they were secured to the implants using 10 mm flat head guide pins with a 15 N.cm torque. 10 Open tray polyether impressions were made, and casts were poured. Each splinting method's distortion values were measured using a coordinate measuring machine capable of recordings in the X-, Y-, and Z-axes. Comparison of mean distances for X1, X2, and X3 was made using the Kruskal-Wallis test, and Pairwise comparison was done using Post Hoc Tukey's Test. RESULTS: The differences between the groups were significant when assessing the distances X1, X2, and X3 (p < 0.05). The comparison of deviations between the groups revealed a statistically significant difference (p < 0.05) for the deviation distance X3 but not for the deviation distances X1 and X2. For distance Y1, the difference between the groups was statistically significant (p0.05), but it was not significant for distances Y2 and Y3. A statistically significant difference was seen in the comparison between the groups (p < 0.05) for the deviation distances Y1, Y2, and Y3. The results were statistically significant for the distance Z1 comparisons, namely, control vs. Group A (p = 0.012), control vs. Group B (p = 0.049), control vs. Group C (p = 0.048), and control vs. Group D (p = 0.021), and for distance Z3 comparison for control vs. Group A (p = 0.033). The results were statistically insignificant for the distance Z2 comparisons (p > 0.05). CONCLUSIONS: All splinting materials produced master casts with measurements in close proximity to the reference model. However, prefabricated pattern resin bars splinting showed the highest accuracy among the studied techniques. The most recent splinting techniques using prefabricated metal framework and light-cure pattern resin showed similar accuracy.

Antitumor activity of ipilimumab or BRAF ± MEK inhibition after pembrolizumab treatment in patients with advanced melanoma: analysis from KEYNOTE-006.

BACKGROUND: Antitumor activity of ipilimumab or BRAF ± MEK inhibitors (BRAFi ± MEKi) following pembrolizumab administration in melanoma is poorly characterized. PATIENTS AND METHODS: In the phase III KEYNOTE-006 study, patients with unresectable stage III/IV melanoma received pembrolizumab (10 mg/kg) once every 2 or 3 weeks (Q3W) or ipilimumab (3 mg/kg) Q3W. The current post hoc analysis evaluates outcomes with ipilimumab or BRAFi ± MEKi as first subsequent systemic therapy after pembrolizumab administration and includes patients who completed or discontinued pembrolizumab after one or more dose. Pembrolizumab arms were pooled. RESULTS: At data cut-off (4 December 2017), median follow-up was 46.9 months. Of 555 pembrolizumab-treated patients, first subsequent therapy was ipilimumab for 103 (18.6%) and BRAFi ± MEKi for 59 (10.6%) [33 received BRAFi + MEKi, 26 BRAFi alone; 37 (62.7%) were BRAFi ± MEKi naïve]. In the subsequent ipilimumab group, ORR with previous pembrolizumab was 17.5% [1 complete response (CR); 17 partial response (PR)]; 79.6% had discontinued pembrolizumab due to progressive disease (PD); median overall survival (OS) was 21.5 months. ORR with subsequent ipilimumab was 15.5%; 11/16 responses (8 CRs; 3 PRs) were ongoing. ORR with subsequent ipilimumab was 9.7% for patients with PD as best response to pembrolizumab. Median OS from ipilimumab initiation was 9.8 months. In the subsequent BRAFi ± MEKi group, ORR with previous pembrolizumab was 13.5% (8 PR); 76.3% had discontinued pembrolizumab due to PD; median OS was 17.9 months. ORR with subsequent BRAFi ± MEKi was 30.5%, 7/18 responses (4 CR, 3 PR) were ongoing. Median OS from BRAFi ± MEKi initiation was 12.9 months. ORR for BRAFi ± MEKi-naïve patients who received subsequent BRAFi ± MEKi was 43.2%; 6/16 were ongoing (3 CR, 3 PR). CONCLUSIONS: Ipilimumab and BRAFi ± MEKi have antitumor activity as first subsequent therapy after pembrolizumab in patients with advanced melanoma.

Cardiovascular Risks with Epidermal Growth Factor Receptor (EGFR) Tyrosine Kinase Inhibitors and Monoclonal Antibody Therapy.

PURPOSE OF REVIEW: Tyrosine kinase inhibitors (TKI) and monoclonal antibodies (mAbs) that target the epidermal growth factor receptor (EGFR) have changed the therapeutic landscape across a range of solid malignancies. However, there is little data regarding the cardiovascular (CV) impact of these agents. The purpose of this review is to discuss reported CV effects, pathophysiology, pre-treatment screening, diagnostic workup, and treatment recommendations in this patient population. RECENT FINDINGS: It is apparent that CV events are not class dependent, and while infrequently reported in clinical trials, unique CV toxicity may occur with EGFR inhibitors, including structural, electrical, and vascular events. There remains an unmet need to fully elucidate the spectrum of CV events associated with EGFR inhibitors. Early CV screening, close clinical monitoring, coupled with a multidisciplinary approach between medical and cardio-oncology is needed to minimize the potentially detrimental impact of cardiotoxicity in this patient population.

Influence of Surface Type with Coffee Immersion on Surface Topography and Optical and Mechanical Properties of Selected Ceramic Materials.

BACKGROUND The aim of this study was to assess and compare the effect of surface type (glazed or polished) with coffee immersion and aging on surface topography (Ra), optical properties (TP, OP), and mechanical properties (fracture forces and modes) of zirconia-reinforced lithium silicate (Vita Suprinity), hybrid polymer-infiltrated-feldspathic ceramic network material (Vita Enamic), and leucite-containing feldspathic glass (Vitablocs® Mark II) made by computer-aided design and computer-aided manufactured (CAD/CAM) ceramic materials. MATERIAL AND METHODS Fifty-four specimens were assembled out of the above 3 CAD/CAMs ceramic materials. Each group was divided into glazed or polished surfaces, having 9 specimens of every type and stained in coffee for 15 days. Ra and color of specimens in the form of TP and OP were recorded before and after immersion in staining material. Fracture forces and modes were analyzed after the 90-day aging. Data were analyzed using ANOVA, then post hoc analysis and Bonferroni tests. RESULTS Our study found significant differences in Ra, TP, and Op before and after coffee immersion between glazed and polished specimens, with higher values in the polished surfaces among the 3 ceramic materials. The highest values of fracture resistance were noted in Vita Suprinity, and Vita Enamic had the lowest values, without significant differences among groups. CONCLUSIONS Most of the TP and OP values were in acceptable clinical range, and Vita Suprinity had superior TP than the other groups. Reparable fracture types were observed in Vita Suprinity, whereas semi-reparable and non-reparable were predominant in other groups.

Catalytic pyrolysis of high-density polyethylene over nickel-waste chicken eggshell/HZSM-5.

The main objective of the current work is to investigate the effect of nickel-waste chicken eggshell modified Hydrogen exchanged Zeolite Socony Mobil-5 (Ni-WCE/HZSM-5) on pyrolysis of high-density polyethylene (HDPE). Ni-WCE/HZSM-5 was synthesized via the impregnation incipient wetness (IWI) method with Ni and WCE mass loading of 4 and 12 wt% respectively. HZSM-5, CaO, WCE, WCE/HZSM-5, and Ni/HZSM-5 were prepared for comparison purposes with Ni-WCE/HZSM-5. All the synthesized catalysts were characterized for phase analysis, metal loading, surface morphology, and textural properties. The impregnation of nickel and WCE had significantly affected the original framework of HZSM-5, where the crystallinity percentage and average crystal size of HZSM-5 dropped to 44.97% and increased to 47.90 nm respectively. The surface morphology of HZSM-5 has drastically changed from a cubic-like shape into a spider web-like surface after the impregnation of WCE. The BET surface area of HZSM-5 has been lowered due to the impregnation of nickel and WCE, but the total pore volume has increased greatly from 0.2291 cm3/g to 0.2621 cm3/g. The catalyst performance was investigated in the pyrolysis of HDPE via a fixed bed reactor and the pyrolysis oil was further analysed to evaluate the distribution of C6 to C9> hydrocarbons. Among the tested catalytic samples, the highest pyrolysis oil yield was achieved by WCE (80%) followed by CaO (78%), WCE/HZSM-5 (63%), HZSM-5 (61%), Ni/HZSM-5 (44%) and Ni-WCE/HZSM-5 (50%). For hydrocarbon distribution in pyrolysis oil, the Ni/HZSM-5 produced the highest of total C6 and C7 hydrocarbons at 12% and 27% respectively followed by WCE/HZSM-5 (4% and 20%), non-catalytic (5% and 13%), Ni-WCE/HZSM-5 (0% and 15%), WCE (0% and 10%), HZSM-5 (0% and 6%) and CaO (0% and 0%).

Green Synthesized Zinc Oxide Nanoparticles Based on Cestrum diurnum L. of Potential Antiviral Activity against Human Corona 229-E Virus.

SARS-CoV-2 has caused more than 596 million infections and 6 million fatalities globally. Looking for urgent medication for prevention, treatment, and rehabilitation is obligatory. Plant extracts and green synthesized nanoparticles have numerous biological activities, including antiviral activity. HPLC analysis of C. dirnum L. leaf extract showed that catechin, ferulic acid, chlorogenic acid, and syringic acid were the most major compounds, with concentrations of 1425.16, 1004.68, 207.46, and 158.95 µg/g, respectively. Zinc nanoparticles were biosynthesized using zinc acetate and C. dirnum extract. TEM analysis revealed that the particle size of ZnO-NPs varied between 3.406 and 4.857 nm. An XRD study showed the existence of hexagonal crystals of ZnO-NPs with an average size of 12.11 nm. Both ZnO-NPs (IC50 = 7.01 and CC50 = 145.77) and C. dirnum L. extract (IC50 = 61.15 and CC50 = 145.87 µg/mL) showed antiviral activity against HCOV-229E, but their combination (IC50 = 2.41 and CC50 = 179.23) showed higher activity than both. Molecular docking was used to investigate the affinity of some metabolites against the HCOV-229E main protease. Chlorogenic acid, solanidine, and catchin showed high affinity (-7.13, -6.95, and -6.52), compared to the ligand MDP (-5.66 Kcal/mol). Cestrum dinurum extract and ZnO-NPs combination should be subjected to further studies to be used as an antiviral drug.

Cord Blood Thyroid Stimulating Hormone Values in Healthy Term Babies delivered at Abubakar Tafawa Balewa University Teaching Hospital Bauchi, Northeastern Nigeria.

BACKGROUND: Congenital hypothyroidism is one of the most common preventable causes of mental retardation and clinical manifestations are often subtle or absent at birth and hence the need for screening. Implementation of newborn screening requires local normative values. OBJECTIVES: To determine the normative values of cord Thyroid Stimulating Hormone (TSH) among term babies in Bauchi, Northeast Nigeria and compare it with that from other centers in Nigeria. METHODOLOGY: Cord blood samples from 200 term babies were analyzed for TSH by Fluorescence Immunoassay technique in this descriptive cross-sectional study. A cut-off of >20 µIU/ml was used for recall. The mean and range were determined and compared with those of previous local studies using t-test. Impact of some maternal and infant factors on TSH was also assessed. RESULTS: The overall mean (SD) cord TSH was 3.74 (±1.99) µIU/ ml and the range was 0.73 to 15.22 µIU/ml (2.5th to 97.5th centile) and none had TSH > 20 µIU/ml and hence our recall rate was 0%. The mean cord TSH was comparable to that reported by a lone local multicenter study (p = 0.120) but significantly different from that of 3 other local studies (p < 0.001). There was also no significant difference between the means of different gender, birth weight groups, mode of delivery, socio-economic classes, maternal age and parity. CONCLUSION: The Cord blood TSH level of most term newborn in Bauchi, similar to other Nigerian studies, is < 10 µIU/ml with a few but significant percentage recording cord TSH level > 10 µIU/ml. Gender, birth weight, mode of delivery, socio-economic class, maternal age and parity were not significantly related to cord TSH level. The mean blood TSH values from different studies across the country tend to vary based on the assay technique. We recommend a nationwide multicenter study with a much larger sample size, lower cutoff value for recall and a unified sample processing laboratory if national normative values are to be developed.

BACKGROUND: L'hypothyroïdie congénitale est l'une des causes évitables les plus courantes de retard mental et les manifestations cliniques sont souvent subtiles ou absentes à la naissance, d'où la nécessité d'un dépistage. La mise en œuvre du dépistage néonatal nécessite des valeurs normatives locales. OBJECTIFS: Déterminer les valeurs normatives de l'hormone stimulatrice de la thyroïde (TSH) du cordon chez les bébés nés à terme à Bauchi, Nord-Est du Nigeria et les comparer à celles d'autres centres du Nigeria. MÉTHODOLOGIE: Des échantillons de sang ombilical de 200 bébés nés à terme ont été analysés pour la TSH par la technique d' étude descriptive transversale. Un seuil de >20 µUI/ml a été utilisé pour le rappel. La moyenne et l'intervalle ont été déterminés et comparés avec ceux des études locales précédentes en utilisant le test t. L'impact de certains facteurs maternels myet infantiles sur la TSH a également été évalué. RÉSULTATS: La moyenne globale (SD) de la TSH du cordon était de 3,74 (±1,99) µIU/ml et l'intervalle était de 0,73 à 15,22 µIU/ml (2,5 à 97,5 centiles) aucun n'avait une TSH > 20 µIU/ml et donc notre taux de rappel était de 0%. La moyenne de TSH au cordon était comparable à celle rapportée par une seule étude multicentrique locale unique (p = 0,120) mais significativement différente de celle de 3 autres études locales (p < 0,001). Il n'y avait pas non plus de différence significative entre les moyennes des différents sexes, groupes de poids de naissance, mode d'accouchement, classes socio d'accouchement, les classes socio-économiques, l'âge maternel et la parité. CONCLUSION: Le niveau de TSH dans le sang de cordon de la plupart des nouveau-nés à termede la plupart des nouveau-nés à terme à Bauchi, comme dans d'autres études nigérianes, est < 10 µUI/ml mais significatif, enregistrant un niveau de TSH du cordon > 10 µIU/ml. Le sexe, le poids à la naissance, le mode d'accouchement, la classe socio-économique maternelle et la parité n'étaient pas significativement liés au taux de TSH au cordon. Le site valeurs moyennes de la TSH sanguine provenant de différentes études dans le pays ont tendance à varier en fonction de la technique de dosage. Nous recommandons une étude nationale multicentrique avec une taille d'échantillon beaucoup plus grande, une valeur seuil pour le rappel et un laboratoire de traitement des échantillons unifié si des valeurs normatives nationales doivent être développées. Mots clés: Sang de cordon, Hormone de stimulation thyroïdienne, Bébés à terme.