Ultrasensitive Fluorescent Microsensors Based on Aptamers Modified with SYBR Green I for Visual Quantitative Detection of Organophosphate Pesticides.

Organophosphate pesticides (OPs) are widely utilized in agricultural production, and the residues threaten public health and environmental safety due to their toxicity. Herein, a novel and simple DNA aptamer-based sensor has been fabricated for the rapid, visual, and quantitative detection of profenofos and isocarbophos. The proposed DNA aptamers with a G-quadruplex spatial structure could be recognized by SYBR Green I (SG-I), resulting in strong green fluorescence emitted by SG-I. The DNA aptamers exhibit a higher specific binding ability to target OP molecules through aromatic ring stacking, disrupting the interaction between SG-I and DNA aptamers to induce green fluorescence quenching. Meanwhile, the fluorescence wavelength of G-quadruplex fluorescence emission peaks changes, accompanied by an obvious fluorescence variation from green to blue. SG-I-modified aptasensor without any additive reference fluorescence units for use in multicolor fluorescence assay for selective monitoring of OPs was first developed. The developed aptasensor provides a favorable linear range from 0 to 200 nM, with a low detection limit of 2.48 and 3.01 nM for profenofos and isocarbophos, respectively. Moreover, it offers high selectivity and stability in real sample detection with high recoveries. Then, a self-designed portable smartphone sensing platform was successfully used for quantitative result outputs, demonstrating experience in designing a neotype sensing strategy for point-of-care pesticide monitoring.

Background-Free and Reversible Upconversion Hydrogel Sensing Platform for Visual Monitoring of Sulfite.

Excessive sulfite usage in food and pharmaceutical production causes respiratory and neurological diseases, underscoring the need for a sensitive and rapid quantification strategy. The portable sensing platform based on a luminescent hydrogel sensor is a powerful tool for the on-site, real-time detection of sulfite ions. However, the lack of recyclability in almost all reaction-based hydrogel sensors increases the application cost. This study constructed a reversible and upconversion nanoprobe combining upconversion nanoparticles (UCNPs) and pararosaniline (PAR) for sulfite detection. The upconversion nanoprobe was further encapsulated in a three-dimensional polyacrylamide hydrogel matrix to create a background-free, reversible hydrogel sensor. The near-infrared excitation of UCNPs avoids the autofluorescence in the hydrogel and real samples. Meanwhile, PAR serves as a specific recognition unit for sulfite ions. After the addition of sulfites, a specific reaction occurs between PAR and sulfites, leading to the recovery of characteristic emission at 540 nm, achieving sensitive detection of sulfite ions. Importantly, this specific reaction is reversible under thermal treatment, allowing the hydrogel sensor to return to its initial state and thus enabling reversible detection of sulfite ions. Furthermore, a portable sensing platform is developed to realize point-of-care, real-time quantitative detection of sulfite ions. The proposed upconversion reversible hydrogel sensor provides a new sensing strategy for the detection of hazardous substances in food and offers new insights into the preparation of reversible, highly sensitive hydrogel sensors.

Multiplex Chroma Response Wearable Hydrogel Patch: Visual Monitoring of Urea in Body Fluids for Health Prognosis.

Visual wearable devices can rapid intuitively monitor biomarkers in body fluids to indicate the human health status and provide valuable reference for further medical diagnosis. However, unavoidable interference factors such as skin color, natural light, and background luminescence can interfere with the visualization accuracy of flexible wearable devices, limiting their practical sensing application. Here, we designed a wearable sensing patch via an embedded upconversion optical probe in a 3D porous polyacrylamide hydrogel, exhibiting a multiplex chroma response to urea based on the inner filter effect, which overcomes the susceptibility to external conditions due to its near-infrared excited luminescence and improves the resolution and accuracy of visual sensing. Furthermore, a highly compatible portable sensing platform combined with a smartphone was designed to achieve in situ rapid quantitative analysis of urea. The limit of detection values of the upconversion optical probe and hydrogel sensor are as low as 1.4 and 30 µM respectively, exhibiting the practicality in different scenarios. The designed sensing patch provides a convenient and accurate sensing strategy for the detection of biomarkers in body fluids and has the potential to be developed into a point-of-care device to provide disease early warning and clinical diagnosis.

Photoinduced Electron Transfer-Triggered g-C3N4\Rhodamine B Sensing System for the Ratiometric Fluorescence Quantitation of Carbendazim.

Assays for carbendazim (Car) with high sensitivity and on-site screening have been urgently required to protect the ecosystem and prevent disease. In this work, a simple, sensitive, and reliable sensing system based on photoinduced electron transfer was established to detect carbendazim utilizing ultrathin graphitic carbon nitride (g-C3N4) nanosheets and rhodamine B (RB). Carbendazim reacts with g-C3N4 by electrostatic interactions to form π-π stacking, and the quenching of the blue fluorescence is caused by electron transfer. While RB works as a reference fluorescence sensor without any fluorescence change, leading to obvious ratiometric fluorescence variation from blue to purple. Under optimal conditions, a favorable linear range from 20 to 180 nM was obtained, with a low detection limit of 5.89 nM. In addition, a portable smartphone sensing platform was successfully used for carbendazim detection in real samples with excellent anti-interference capability, demonstrating the potential applications of carbendazim monitoring.

A Portable Sensing Platform Using an Upconversion-Based Nanosensor for Visual Quantitative Monitoring of Mesna.

Mesna is an important regional antidote for protecting the urinary system of chemotherapy patients, which requires monitoring its level in real time to ensure the curative effect. The fluorescence method is a powerful tool in real-time detection with the advantages of fast response and visualization. However, the background interference limits its application in biological sensing. Here, we developed a portable sensing platform using an upconversion-based nanosensor for visual quantitative monitoring of mesna in real-time/on-site conditions. The nanosensor was constructed by upconversion nanoparticles (UCNPs) and ethyl violet (EV), in which the UCNPs emitted red and green light, while EV quenched the green light due to the inner filter effect (IFE). The reaction of mesna with EV caused its fading and broke the IFE process, leading to the recovery of green light. By the fluorescence and colorimetric chromaticity variations, the nanosensor achieved a dual-readout detection for mesna with low limits of detection (LODs) of 26 and 48 nM, respectively. Furthermore, a highly compatible sensing platform was fabricated for facile determination of mesna with an LOD of 56 nM, realizing visual quantitative monitoring of the mesna level to ensure the curative effect and providing a new strategy for point-of-care testing of drugs in clinical settings.

Chromaticity Evolutionary Detection of Food Contaminant Semicarbazide through an Upconversion Luminescence-Based Nanosensor.

Semicarbazide (SEM) is a widespread carcinogenic and neurotoxic food contaminant, originating from the metabolite of antibiotic nitrofurazone, which is used in aquaculture, or thermal decomposition byproduct of a flour blowing agent azodicarbonamide. Although optical detection technologies are powerful tools considering the advantages of fast response and visualization detection, there are few optical nanosensors for highly sensitive and visual assays of SEM due to no luminescence response and UV absorbance of SEM. Herein, an upconversion luminescence (UCL)-based nanosensor was designed for visual detection of SEM with high sensitivity and good selectivity. The nanosensor was constructed by combining upconversion nanoparticles (UCNPs) and phosphomolybdic acid (PMA), which was used as the specific recognition element of SEM. The developed nanosensor exhibited selective absorbance enhancement and UCL quenching behavior with the addition of SEM based on the inner filter effect (IFE). Since the change in absorbance translated into an exponential change in the luminescence, the sensitivity of the nanosensor was greatly improved. The nanosensor realized a highly sensitive and visual response to SEM in the linear range of 0.5-16 µM with a low limit of detection of 58 nM. Moreover, satisfactory recovery values ranging from 90 to 112% in spiked real samples indicated the practical applicability of the nanosensor. The nanosensor designed here provides a sensitive and convenient sensing strategy for visual detection of hazardous substances and is expected to develop the upconversion sensing application in food safety.

Portable Smartphone Platform Based on a Single Dual-Emissive Ratiometric Fluorescent Probe for Visual Detection of Isopropanol in Exhaled Breath.

The components in the exhaled breath have been confirmed to be related to certain diseases, especially studies have shown that isopropanol (IPA) might be closely associated with illnesses such as lung cancer, and are considered as a biomarker. Herein, we designed a portable smartphone platform based on a chemically synthesized ratiometric fluorescent probe for real-time/on-site, sensitive, and quantitative visual detection of IPA in exhaled breath. The fluorescent probe was fabricated by a nicotinamide adenine dinucleotide (NAD+) functional modified onto fluorescent internal standard red carbon dots (RCDs). Whereas, IPA can convert NAD+ into reduced nicotinamide adenine dinucleotide (NADH) through an enzymatic reaction of secondary alcohol dehydrogenase (S-ADH). The electron transfer from IPA to NAD+ emitted a blue emission of NADH, which displayed consecutive color changes from red to light blue. Under optimum conditions, the fluorescent probe shows sensitive responses to IPA with a detection limit as low as 4.45 nM. Moreover, combined with the smartphone color recognizer application (APP), the ratio of fluorescence intensity response was recorded on a blue channel (B)/red channel (R), which has been employed for the visual quantitative determination of IPA with a detection limit of 8.34 nM and a recovery rate of 90.65-110.09% (RSD ≤ 4.83). The method reported here provides a convenient pathway for real-time/on-site and visual detection of IPA in exhaled air and is expected to extend the application of investigation of potential volatile biomarkers for preliminary monitoring and clinical diagnosis.

3D-printed smartphone-based device for fluorimetric diagnosis of ketosis by acetone-responsive dye marker and red emissive carbon dots.

A portable smartphone device is reported that uses 3D printing technology for the primary diagnosis of diseases by detecting acetone. The key part of the device consists of red carbon dots (RCDs), which are used as internal standards, and a sensing reagent (3-N,N-(diacethydrazide)-9-ethylcarbazole (2-HCA)) for acetone. With an excitation wavelength of 360 nm, the emission wavelengths of 2-HCA and RCDs are 443 nm and 619 nm, respectively. 2-HCA effectively captures acetone to form a nonfluorescent acylhydrazone via a condensation reaction occurring in aqueous solution, resulting in obvious color changes from blue-violet to dark red. The detection limit for acetone is 2.62 µM (~ 0.24 ppm). This is far lower than the ketone content in normal human blood (≤ 0.50 mM) and the acetone content in human respiratory gas (≤ 1.80 ppm). The device has good recovery rates for acetone detection in blood and exhaled breath, which are 90.56-109.98% (RSD ≤ 5.48) and 92.80-108.00% (RSD ≤ 5.07), respectively. The method designed here provides a reliable way to provide health warnings by visually detecting markers of ketosis/diabetes in blood or exhaled breath. The portable smart phone device visually detects ketosis/diabetes markers in the blood or exhaled breath through the nucleophilic addition reaction, which effectively captures acetone to form nonfluorescent acyl groups. This will be a reliable tool to warn human health.

Semiquantitative Visual Detection of Lead Ions with a Smartphone via a Colorimetric Paper-Based Analytical Device.

A simple, instrument-free, paper-based analytical device with dual-emission carbon dots (CDs) (blue CDs and red CDs) was developed for the semiquantitative, visual, and sensitive speciation analysis of lead ions in a real sample with a sensitive detection limit of 2.89 nM. When a paper strip was immersed into the sample solution, the blue fluorescence was quenched by Pb2+ in solution, while the red fluorescence served as a background reference without color change, and significant color evolutions from blue to red were observed under the ultraviolet lamp, resulting in a semiquantitative visual detection. Furthermore, a smartphone was used in the visual detection of lead ions by identifying the RGB value of the fluorescent probe solution and corresponding paper strip. The application of smartphones and fluorescent paper strips has greatly shortened the detection time and reduced the cost of detection, providing a new strategy for the on-site and semiquantitative detection of heavy-metal ions in water samples.

Real-Time Discrimination and Versatile Profiling of Spontaneous Reactive Oxygen Species in Living Organisms with a Single Fluorescent Probe.

Fluorescent probes are powerful tools for the investigations of reactive oxygen species (ROS) in living organisms by visualization and imaging. However, the multiparallel assays of several ROS with multiple probes are often limited by the available number of spectrally nonoverlapping chromophores together with large invasive effects and discrepant biological locations. Meanwhile, the spontaneous ROS profilings in various living organs/tissues are also limited by the penetration capability of probes across different biological barriers and the stability in reactive in vivo environments. Here, we report a single fluorescent probe to achieve the effective discrimination and profiling of hydroxyl radicals (•OH) and hypochlorous acid (HClO) in living organisms. The probe is constructed by chemically grafting an additional five-membered heterocyclic ring and a lateral triethylene glycol chain to a fluorescein mother, which does not only turn off the fluorescence of fluorescein, but also create the dual reactive sites to ROS and the penetration capability in passing through various biological barriers. The reactions of probe with •OH and HClO simultaneously result in cyan and green emissions, respectively, providing the real-time discrimination and quantitative analysis of the two ROS in cellular mitochondria. Surprisingly, the accumulation of probes in the intestine and liver of a normal-state zebrafish and the transfer pathway from intestine-to-blood-to-organ/tissue-to-kidney-to-excretion clearly present the profiling of spontaneous •OH and HClO in these metabolic organs. In particular, the stress generation of •OH at the fresh wound of zebrafish is successfully visualized for the first time, in spite of its extremely short lifetime.

Color-Multiplexing-Based Fluorescent Test Paper: Dosage-Sensitive Visualization of Arsenic(III) with Discernable Scale as Low as 5 ppb.

Fluorescent colorimetry test papers are promising for the assays of environments, medicines, and foods by the observation of the naked eye on the variations of fluorescence brightness and color. Unlike dye-absorption-based pH test paper, however, the fluorescent test papers with wide color-emissive variations with target dosages for accurate quantification remain unsuccessful even if the multicolorful fluorescent probes are used. Here, we report the dosage-sensitive fluorescent colorimetry test paper with a very wide/consecutive "from red to cyan" response to the presence and amount of arsenic ions, As(III). Red quantum dots (QDs) were modified with glutathione and dithiothreitol to obtain the supersensitivity to As(III) by the quenching of red fluorescence through the formation of dispersive QDs aggregates. A small amount of cyan carbon dots (CDs) with spectral blue-green components as the photostable internal standard were mixed into the QDs solution to produce a composited red fluorescence. Upon the addition of As(III) into the sensory solution, the fluorescence color could gradually be reversed from red to cyan with a detection limit of 1.7 ppb As(III). When the sensory solution was printed onto a piece of filter paper, surprisingly a serial of color evolution from peach to pink to orange to khaki to yellowish to yellow-green to final cyan with the addition of As(III) was displayed and clearly discerned the dosage scale as low as 5 ppb. The methodology reported here opens a novel pathway toward the real applications of fluorescent test papers.

Label-free surface-enhanced Raman scattering imaging to monitor the metabolism of antitumor drug 6-mercaptopurine in living cells.

The molecular processes of drugs from cellular uptake to intracellular distribution as well as the intracellular interaction with the target molecule are critically important for the development of new antitumor drugs. In this work, we have successfully developed a label-free surface-enhanced Raman scattering (SERS) technique to monitor and visualize the metabolism of antitumor drug 6-mercaptopurine in living cells. It has been clearly demonstrated that Au@Ag NPs exhibit an excellent Raman enhancement effect to both 6-mercaptopurine and its metabolic product 6-mercaptopurine-ribose. Their different ways to absorb at the surface of Au@Ag NPs lead to the obvious spectral difference for distinguishing the antitumor drug and its metabolite by SERS spectra. The Au@Ag NPs can easily pass through cell membranes in a large amount and sensitively respond to the biological conversion of 6-mercaptopurine in tumor cells. The Raman imaging can visualize the real-time distribution of 6-mercaptopurine and its biotransformation with the concentrations in tumor cells. The SERS-based method reported here is simple and efficient for the assessments of drug efficacy and the understanding of the molecular therapeutic mechanism of antitumor drugs at the cellular level.

Multiemitting Ultralong Phosphorescent Carbonized Polymer Dots via Synergistic Enhancement Structure Design.

Advancing a metal-free room temperature phosphorescent (RTP) material that exhibits multicolor emission, remarkable RTP lifetime, and high quantum yield still faces the challenge of achieving intersystem crossing between singly and triplet excited states, as well as the rapid decay of triplet excited states due to nonradiative losses. In this study, a novel strategy is proposed to address these limitations by incorporating o-phenylenediamine, which generates multiple luminescent centers, and long-chain polyacrylic acid to synthesize carbonized polymer dots (CPDs). These CPDs are then embedded in a rigid B2O3 matrix, effectively limiting nonradiative losses through the synergistic effects of polymer cross-linking and the rigid matrix. The resulting CPD-based materials exhibit remarkable ultralong phosphorescence in shades of blue and lime green, with a visible lifetime of up to 49 s and a high phosphorescence quantum yield. Simultaneously, this study demonstrates the practical applicability of these excellent material properties in anti-counterfeiting and information encryption.

Ultrafine Aramid Nanofiber-Assisted Large-Area Dense Stacking of MXene Films for Electromagnetic Interference Shielding and Multisource Thermal Conversion.

Polymers are often used as adhesives to improve the mechanical properties of flexible electromagnetic interference (EMI) shielding layered films, but the introduction of these insulating adhesives inevitably reduces the EMI performance. Herein, ultrafine aramid nanofibers (UANF) with a diameter of only 2.44 nm were used as the binder to effectively infiltrate and minimize the insulating gaps in MXene films, for balancing the EMI shielding and mechanical properties. Combining the evaporation-induced scalable assembly assisted by blade coating, flexible large-scale MXene/UANF films with highly aligned and compact MXene stacking are successfully fabricated. Compared with the conventional ANF with a larger diameter of 7.05 nm, the UANF-reinforced MXene film exhibits a "brick-mortar" structure with higher orientation and compacter stacking MXene nanosheets, thus showing the higher mechanical properties, electrical conductivity, and EMI shielding performance. By optimizing MXene content, the MXene/UANF film can achieve the optimal tensile strength of 156.9 MPa, a toughness of 2.9 MJ m-3, satisfactory EMI shielding effectiveness (EMI SE) of 40.7 dB, and specific EMI SE (SSE/t) of 22782.4 dB cm2/g). Moreover, the composite film exhibits multisource thermal conversion functions including Joule heating and photothermal conversion. Therefore, the multifunctional MXene/UANF EMI shielding film with flexibility, foldability, and robust mechanical properties shows the practical potential in complex application environments.

Multi-deformable interpenetrating network thermosensitive hydrogel fluorescent device for real-time and visual detection of nitrite.

Functionalized thermosensitive hydrogel materials exhibit excellent properties for the fabrication of sensing devices that enable real-time visual detection of food safety duo to their good plasticity and powerful loading capacity. Here, a ratiometric fluorescent device based on an interpenetrating network (IPN) thermosensitive hydrogel was designed to embed functionalized Au nanoclusters (Au NCs) and Blue Carbon dots (BCDs) composites in a multi-network structure to build a sensitive hazardous material nitrite (NO2-) chemsensor. The hydrogel was utilized poloxamer 407 (P407), lignin and cellulose to form stable IPN structure, which resulted in complementation and synergy, thereby strengthening its porous network structure. The combination of fluorescent nanoprobes with the porous network structure has the potential to enhance stable fluorescence signals and improve sensing sensitivity. Moreover, the thermosensitive liquid-solid transition characteristics of the hydrogel facilitate its preparation into diverse sensing devices following curing at room temperature. The hydrogel device, when combined with a smartphone system, converted image information into data information, thereby enabling the accurate quantification of NO2- with a detection limit of 9.38 nM in 2 s. The designed multi-functional hydrogel device is capable of real-time differentiation of NO2- dosage with the naked eye, offering a high-contrast, rapid-response sensing methodology for visual assessment of food freshness. This research contributes to the expansion of hydrogel materials applications and the detection of hazardous materials in food safety.

Fluorescence sensing probe based on functionalized mesoporous MOFs for non-invasive and detection of dopamine in human fluids.

Abnormal amount of dopamine (DA) in human body is closely relate to various diseases, such as Parkinson's disease, pheochromocytoma. Real-time monitoring DA is crucial for disease warning, diagnosis and treatment. Currently, most methods rely on invasive blood testing for detecting DA, which is only completed with the aid of the medical staffs in hospitals. Herein, a non-invasive fluorescence visual strategy is developed for the real-time monitoring DA, based on luminescent nanoparticles and modified mesoporous zeolite imidazole framework (ZIF-8-NH2) dodecahedrons. During the reaction process, DA is enriched through the spatial configuration of ZIF-8-NH2 and hydrogen bonding effect. The luminescence of Cr3+-doped zinc gallate (ZnGa2O4:Cr3+, ZGC) is inhibited by the photo-induced electron transfer (PET) mechanism to realize sensitively detecting DA. The intelligent sensing platform based on the designed fluorescence probe and color recognition system is structured for real-time detection of DA in urine. Furthermore, a skin-fitting hydrogel patch is prepared by combining a fluorescent probe with chitosan, which enables sensitive and accurate detection of DA in sweat without the complex sample pretreatment. The non-invasive fluorescence detection method provides an effective strategy for quantitatively monitoring DA in human fluids.

Ion coordination and chelation in Eu-MOFs matrices: Ultrafast fluorescence visual quantification monitoring of antibiotic residues.

Rapid monitoring of trace antibiotics in the field in real time is essential for environment forewarning and human health. High sensitivity and real-time on-site quantitative monitoring of antibiotic residues can be accomplished by integrating portable sensors alongside fluorescent optics to construct an intelligent sensing platform that smoothly eliminates the instability of conventional detection methods. In this study, a ratiometric fluorescence sensor for the ultrasensitive detection of pefloxacin was built employing the photoinduced electron transfer (PET) mechanism from red Eu-MOFs to Mn2+-PEF complex. A visual color change results from the photoinduced electron transfer process from manganese ions to pefloxacin weakening the ligand metal charge transfer (LMCT) process in Eu-MOFs. This enables the ultrafast visible detection of pefloxacin and produces a transient shift in visual color with a detection limit as low as 15.4 nM. For the detection of pefloxacin in water, tomato, and raw pork samples, various sensing devices based on the developed fluorescent probes exhibit good practicability and accuracy. With the development of the ratiometric fluorescence sensing probe, it is now possible to quickly and quantitatively identify pefloxacin residues in the environment, offering a new method for ensuring the safety of food and people's health.

Hydrogen-bond induced enhanced emission ratiometric fluorescent handy needle for visualization assay of amoxicillin by smartphone sensing platform.

Amoxicillin (AMO) is one of the most commonly used antibiotics, and its abuse in animal husbandry or clinical therapy can pose unpredictable hazards to humans. Therefore, it is crucial to develop a real-time and rapid method to accurately determine AMO content. Here, we designed a fluorescent nanoprobe for qualitative and quantitative AMO determination by using as-synthesized green safe materials of nontoxic red carbon dots (RCDs) and blue carbon dots (BCDs). In the presence of AMO, a reaction promoting hydrogen bonding occurred immediately, resulting in an instant increase in the intensity of the blue fluorescence of BCDs, accompanied by a marked color change from red to blue. For practical application, we designed a nontoxic sensing fluorescent handy needle to directly and quantitatively detect AMO in real samples. This portable and easy-to-use device was demonstrated on a smartphone platform based on 3D printing technology, which offers the advantages of simple production, excellent visualization, fast response, and instant quantitative detection. The device requires an extremely short detection time and has a sensitive detection limit of 2.39 nM. The method presented here enables real-time assessment for food safety, as well as on-site detection under field conditions to track various trace substances for timely health checks.

Two birds with one stone: Ratiometric sensing platform overcoming cross-interference for multiple-scenario detection and accurate discrimination of tetracycline analogs.

Environmental pollution caused by tetracycline antibiotics (TCs) is a major concern for public health worldwide. Trace detection and reliable discrimination of tetracycline and its analogs are consequently essential to determine the distribution characteristics of various tetracycline family members. Here, a dual-response sensor was constructed by integrating the fluorescence emission of fluorescein isothiocyanate (FITC) doped SiO2 and Eu3+. A portable Lab-on-Paper device is further fabricated through probe immobilization, which allows convenient visual detection of tetracycline using a smartphone. In addition, for the coexistence of multiple tetracycline analogs, dimensionality reduction via principal component analysis is applied to the spectra, realizing accurate differentiation of the four most widely used tetracycline analogs (tetracycline (TC), chlortetracycline (CTC), oxytetracycline (OTC), and doxycycline (DOX)). The dual-response nanoplatform enabled a wide-gamut color variation crossing from green to red, with limit of detection (LOD) of 2.9 nM and 89.8 nM for spectrometer- and paper-based sensors, respectively. Analytical performance was examined in multiple real samples, including food, environmental, and biological settings, confirming robust environmental adaptability and resistance. Compared to previous TC sensors, this method has several notable improvements, including improved ecological safety, accessibility, reproducibility, practicality, and anti-cross-interference capacity. These results highlight the potential of the proposed "two birds with one stone" strategy, providing an integrated methodology for synchronous quantitative detection and derivative identification toward environmental contaminants.

Lotus leaf mastoid inspired Ag micro/nanoarrays on PDMS film as flexible SERS sensor for in-situ analysis of pesticide residues on nonplanar surfaces.

Conventional surface-enhanced Raman scattering (SERS) molecular detection are based on hard and brittle substrate, which are not suitable for in-situ detection of analytes adsorbed on nonplanar surfaces. Here, we report a simple biomimetic synthesis method to fabricate lotus leaf mastoid structured AgNPs micro/nanoarrays as reliable SERS substrate. By ideal replicating mastoid structure of lotus leaf into a flexible and transparent PDMS film, followed by depositing plasmonic AgNPs, a powerful chemical sensor with high sensitivity and multiplex detecting capability is demonstrated. The employ of periodic mastoid structure array endows the sensor with high signal repeatability (RSD âˆ¼ 8.6 %), solving the general repeatability problem of SERS substrates. In addition, the detailed designed flexible and transparent PDMS substrate is capable of identifying trace analytes on curved surfaces with excellent durability. In the proof-of-concept experiment, a limit of detection (LOD) of (10-5 M to 10-7 M) was achieved on a portable Raman device for three common pesticides residues (thiram, fonofos and triadophos) on dendrobium leaves and stem according to the molecular fingerprint, indicating its excellent in-situ detection capability. Further, the multiplex detection ability of the Ag/PDMS film is also demonstrated by analyzing the mixture of four typical analytes. Benefiting from its high signal uniformity, this flexible Ag/PDMS substrate also showed good quantitative detection capabilities.