RESUMO
Titanium surface modifications to simultaneously prevent bacterial adhesion but promote bone-cell functions could be highly beneficial for improving implant osseointegration. In the present in vitro study, the effect of sulfonate groups on titanium surfaces was investigated with respect to both S. aureus adhesion and osteoblast functions pertinent to new bone formation. Commercial pure titanium (cpTi) squares were oxydized (Tiox), grafted with poly(sodium styrene sulfonate) groups (Tigraft) by covalent bonding using radical polymerization, and were characterized by infrared spectroscopy (HATR-FTIR) and colorimetry. Bacterial adhesion study showed that Tigraft exhibited high inhibition of S. aureus adhesion S at levels >90 %, when compared to cpTi (P < 0.05). In contrast osteoblasts adhesion was similar on all three titanium surfaces. While the kinetics of cell proliferation were similar on the three titanium surfaces, Alkaline phosphatase-specific activity of osteoblasts cultured on Tigraft surfaces was twofold higher than that observed on either on Tiox or cpTi surfaces (P < 0.01). More importantly, the amount and the distribution of calcium-containing nodules was different. The total area covered by calcium-containing nodules was 2.2-fold higher on the Tigraft as compared to either Tiox or cpTi surfaces (P < 0.01). These results provide evidence that poly(sodium styrene sulfonate) groups grafting on cpTi simultaneously inhibits bacteria adhesion but promote osteoblast function pertinent to new bone formation. Such modified titanium surfaces offer a promising strategy for preventing biofilm-related infections and enhancing osteointegration of implants in orthopaedic and dental applications.
Assuntos
Aderência Bacteriana/efeitos dos fármacos , Diferenciação Celular/efeitos dos fármacos , Materiais Revestidos Biocompatíveis/farmacologia , Osteoblastos/efeitos dos fármacos , Staphylococcus aureus/efeitos dos fármacos , Animais , Células Cultivadas , Materiais Revestidos Biocompatíveis/síntese química , Materiais Revestidos Biocompatíveis/química , Embrião de Mamíferos , Teste de Materiais , Testes de Sensibilidade Microbiana , Osseointegração/efeitos dos fármacos , Osteoblastos/fisiologia , Osteogênese/efeitos dos fármacos , Polímeros/síntese química , Polímeros/química , Polímeros/farmacologia , Poliestirenos/síntese química , Poliestirenos/química , Poliestirenos/farmacologia , Ratos , Ratos Wistar , Sódio/química , Sódio/farmacologia , Staphylococcus aureus/fisiologia , Compostos de Sulfônio/síntese química , Compostos de Sulfônio/química , Compostos de Sulfônio/farmacologia , Titânio/química , Titânio/farmacologiaRESUMO
Implanted prostheses are sometimes subject to bacterial infections, which can threat their benefit rule on a long-term basis. Various methods are studied to fight against these infections. Among them, the grafting of bioactive polymers onto the prosthesis surface shows up as a promising way to the problem of infections. This work presents the influence of various water-soluble bioactive polymers on the inhibition of the Staphylococcus epidermidis adhesion on the titanium samples surfaces initially preadsorbed with various proteins. Whatever the studied protein is, it is shown that the bioactive polymer containing sulfonate functions generates an inhibition of the adhesion of Staphylococcus epidermidis. For a plasma preadsorption, the inhibition rate rises up to 68% when the concentration of sulfonate function is 2.5µmol/L. Titanium surfaces grafted with the bioactive polymer were also tested. We find an inhibitive activity of the adhesion close to that of the previous case. These preliminary results can point up a clinical interest in the fight against the medical devices infection, because they highlight a clear local effect of S. epidermidis adhesion inhibition. Copolymers containing other functional groups (phosphate or carboxylate) were dissolved in a bacterial suspension to monitor the influence of the composition on the adhesion inhibition. Their inhibition rates are not significantly lower than those of pNaSS homopolymers, as much as the sulfonate function proportion remains higher than 50%. Thus, the sulfonate function is the main responsible for the inhibition of the S. epidermidis adhesion.
Assuntos
Alcanossulfonatos/farmacologia , Aderência Bacteriana/efeitos dos fármacos , Dióxido de Carbono/farmacologia , Fosfatos/farmacologia , Polímeros/farmacologia , Staphylococcus epidermidis/efeitos dos fármacos , Titânio/farmacologia , Alcanossulfonatos/química , Antibacterianos/farmacologia , Proteínas Sanguíneas/farmacologia , Dióxido de Carbono/química , Materiais Revestidos Biocompatíveis/química , Materiais Revestidos Biocompatíveis/farmacologia , Humanos , Modelos Biológicos , Fosfatos/química , Polímeros/química , Desenho de Prótese , Solubilidade , Infecções Estafilocócicas/prevenção & controle , Staphylococcus epidermidis/fisiologia , Propriedades de Superfície , Água/farmacologiaRESUMO
The present study assessed in vivo new bone formation around titanium alloy implants chemically grafted with macromolecules bearing ionic sulfonate and/or carboxylate groups. Unmodified and grafted Ti-6Al-4V exhibiting either 100% carboxylate, or 100% sulfonate, or both carboxylate and sulfonate groups in the percent of 50/50 and 80/20 were bilaterally implanted into rabbit femoral condyle. Neither toxicity nor inflammation were observed for all implants tested. After 4 weeks, peri-implant new bone formation varied as a function of the chemical composition of the titanium surfaces. The percent bone-implant contact (BIC) was the lowest (13.4 +/- 6.3%) for the implants modified with grafted carboxylate only. The value of BIC on the implants with 20% sulfonate (24.6 +/- 5.2%) was significantly (P < 0.05) lower than that observed on 100% sulfonate (38.2 +/- 13.2%) surfaces. After both 4 and 12 weeks post-implantation, the BIC value for implants with more than 50% sulfonate was similar to that obtained with the unmodified Ti-6Al-4V. The grafted titanium alloy exhibiting either 100% sulfonate or carboxylate and sulfonate (50% each) groups promoted bone formation. Such materials are of clinical interest because, they do not promote bacteria adhesion but, they support new bone formation, a condition which can lead to osseointegration of bone implants while preventing peri-implant infections.
Assuntos
Alcanossulfonatos/química , Carbono/química , Materiais Revestidos Biocompatíveis/química , Fêmur/citologia , Fêmur/cirurgia , Próteses e Implantes , Titânio/química , Animais , Materiais Biomiméticos/química , Masculino , Teste de Materiais , Tamanho da Partícula , Coelhos , Propriedades de SuperfícieRESUMO
Previous work showed that established interactions between water-soluble polymers and cell membrane receptors can lead to modulate cell proliferation and differentiation in vitro. These polymers can be considered as bioactive. The aim of this work was to establish the consequences of the interactions between human breast cancer cells MCF7 and polymers of various chemical compositions regarding cell adhesion and proliferation onto tissue culture plate. Water soluble copolymers were synthesized by radical polymerization and are composed of methacrylic acid and sodium styrene sulphonate units. The modulation of the MCF7, biological-induced by these polymers of various compositions, was evaluated. The influence of the polymers chemical composition on the kinetics of cell proliferation, as well as cell morphology and spreading, were studied. A polymer concentration-dependent inhibition effect was observed. One hundred microgram per liter polymers solutions induced strong inhibition of cell proliferation, as well as a change of the MCF7 cells morphology, which can be related to an inhibition of cell spreading. The polymers/MCF7 cells interactions are modulated by the chemical composition of the copolymers and then the respective rate in sulphonate and carboxylate groups distributed along the macromolecular chain.
Assuntos
Antineoplásicos/uso terapêutico , Neoplasias da Mama/tratamento farmacológico , Divisão Celular/efeitos dos fármacos , Adenocarcinoma/tratamento farmacológico , Adenocarcinoma/patologia , Neoplasias da Mama/patologia , Linhagem Celular Tumoral , Sobrevivência Celular/efeitos dos fármacos , Feminino , Corantes Fluorescentes , Humanos , Concentração de Íons de Hidrogênio , Espectroscopia de Ressonância Magnética , Espectrofotometria , Ácidos Sulfônicos/farmacologiaRESUMO
Oxidative stress induced by Reactive Oxygen Species (ROS) was shown to be involved in the pathogenesis of chronic diseases such as cardiovascular pathologies. Particularly, oxidative stress has proved to mediate abnormal platelet function and dysfunctional endothelium-dependent vasodilatation representing a key factor in the progression of ischemic injuries. Antioxidants like carotenoids have been suggested to contribute in their prevention and treatment. Astaxanthin, a xanthophyll carotenoid produced naturally and synthetically, shows interesting antioxidant and anti-inflammatory properties. In vivo studies applying different models of induced ischemia and reperfusion (I/R) injury confirm astaxanthin's protective action after oral or intravenous administration. However, some studies have shown some limitations after oral administration such as low stability, bioavailability and bioefficacy, revealing a need for the implementation of new biomaterials to act as astaxanthin vehicles in vivo. Here, a brief overview of the chemical characteristics of astaxanthin, the carrier systems developed for overcoming its delivery drawbacks and the animal studies showing its potential effect to treat I/R injury are presented.
Assuntos
Antioxidantes/farmacologia , Espécies Reativas de Oxigênio/metabolismo , Traumatismo por Reperfusão/tratamento farmacológico , Animais , Xantofilas/química , Xantofilas/farmacologiaRESUMO
An imbalance in the reactive oxygen species (ROS) homeostasis is involved in the pathogenesis of oxidative stress-related diseases. Astaxanthin, a xanthophyll carotenoid with high antioxidant capacities, has been shown to prevent the first stages of oxidative stress. Here, we evaluate the antioxidant capacities of astaxanthin included within hydroxypropyl-beta-cyclodextrin (CD-A) to directly and indirectly reduce the induced ROS production. First, chemical methods were used to corroborate the preservation of astaxanthin antioxidant abilities after inclusion. Next, antioxidant scavenging properties of CD-A to inhibit the cellular and mitochondrial ROS by reducing the disturbance in the redox state of the cell and the infiltration of lipid peroxidation radicals were evaluated. Finally, the activation of endogenous antioxidant PTEN/AKT, Nrf2/HO-1, and NQOI gene and protein expression supported the protective effect of CD-A complex on human endothelial cells under stress conditions. Moreover, a nontoxic effect on HUVEC was registered after CD-A complex supplementation. The results reported here illustrate the need to continue exploring the interesting properties of this hydrophilic antioxidant complex to assist endogenous systems to counteract the ROS impact on the induction of cellular oxidative stress state.
Assuntos
Fibrinolíticos/uso terapêutico , Antioxidantes , Fibrinolíticos/farmacologia , Humanos , Estresse Oxidativo , Espécies Reativas de Oxigênio , Xantofilas/farmacologia , Xantofilas/uso terapêuticoRESUMO
After myocardial infarction, the heart's mechanical properties and its intrinsic capability to recover are compromised. To improve this recovery, several groups have developed cardiac patches based on different biomaterials strategies. Here, we developed polyvinylalcohol/dextran (PVA/Dex) elastic hydrogel patches, obtained through the freeze thawing (FT) process, with the aim to deliver locally a potent natural antioxidant molecule, astaxanthin, and to assist the heart's response against the generated myofibril stress. Extensive rheological and dynamo-mechanical characterization of the effect of the PVA molecular weight, number of freeze-thawing cycles and Dex addition on the mechanical properties of the resulting hydrogels, were carried out. Hydrogel systems based on PVA 145 kDa and PVA 47 kDa blended with Dex 40 kDa, were chosen as the most promising candidates for this application. In order to improve astaxanthin solubility, an inclusion system using hydroxypropyl-ß-cyclodextrin was prepared. This system was posteriorly loaded within the PVA/Dex hydrogels. PVA145/Dex 1FT and PVA47/Dex 3FT showed the best rheological and mechanical properties when compared to the other studied systems; environmental scanning electron microscope and confocal imaging evidenced a porous structure of the hydrogels allowing astaxanthin release. In vitro cellular behavior was analyzed after 24 h of contact with astaxanthin-loaded hydrogels. In vivo subcutaneous biocompatibility was performed in rats using PVA145/Dex 1FT, as the best compromise between mechanical support and astaxanthin delivery. Finally, ex vivo and in vivo experiments showed good mechanical and compatibility properties of this hydrogel. The obtained results showed that the studied materials have a potential to be used as myocardial patches to assist infarcted heart mechanical function and to reduce oxidative stress by the in situ release of astaxanthin.
Assuntos
Materiais Biocompatíveis/química , Dextranos/química , Hidrogéis/química , Álcool de Polivinil/química , 2-Hidroxipropil-beta-Ciclodextrina/química , Animais , Sistemas de Liberação de Medicamentos , Gelatina/química , Células Endoteliais da Veia Umbilical Humana , Humanos , Masculino , Teste de Materiais , Microscopia Confocal , Microscopia Eletrônica de Varredura , Estresse Oxidativo , Porosidade , Ratos , Ratos Wistar , Espécies Reativas de Oxigênio/metabolismo , Reologia , Solubilidade , Estresse Mecânico , Xantofilas/administração & dosagemRESUMO
As joint prostheses become infected preventive strategies are needed. Silicone prostheses were coated with a COO - and SO3 - bearing bioactive copolymer, Q5, synthesized by radical polymerization and the adherence of Staphylococcus aureus (S. aureus)to them was evaluated in vitro and in vivo. Copolymer Q5 contains tris(trimethylsiloxy) methacryloxy propyl silane favoring the compatibility with the silicone matrix, cinnamoyl ethyl methacrylate allowing a network formation at the surface of the silicone prostheses, two ionic monomers: methacrylic acid and sodium styrene sulfonate. In vitro experiments were conducted on Q5-coated silicone lenses and on Q5-coated silicone prostheses. In both cases, materials were incubated with fi-bronectin (Fn) because of its important role in S. aureus adherence to implant surfaces. The percentage of adhesion inhibition was observed at approximately 40% for the coated materials compared to the untreated silicone. Rabbits underwent double-blind partial knee replacements with Q5-coated or control implants fitted into the intramedullary canal of the tibia, and 10 7 bacteria were injected into the knees. The number of bacteria adherent on the prostheses was determined 24 hr later. Signifi-cantly fewer bacteria adhered to Q5-coated than control prostheses (2.26 +/- 0.76 vs 3.86 +/- 0.54 log10 CFU/ml; p < 0.0035). Bioactive polymer coating could provide a new method of preventing joint-prosthesis infections. (Journal of Applied Biomaterials & Biomechanics 2003; 1: 178-85).
RESUMO
Shape-memory resorbable materials were obtained by extrusion-cooking of potato starch with 20% glycerol under usual conditions. They presented an efficient shape-memory with a high recovery ratio (Rr>90%). Their recovery could be triggered at 37°C in water. After water immersion at 37°C, the modulus decreased from 1GPa to 2.4MPa and remained almost constant over 21 days. Gamma-ray sterilization did not have a dramatic impact on their mechanical properties, despite a large decrease of molecular mass analyzed by asymmetrical flow field-flow fractionation coupled with multi-angle laser light scattering (AFFFF-MALLS). Samples implanted in a rat model exhibited normal tissue integration with a low inflammatory response. Thus, as previously investigated in the case of shape-memory synthetic polymers, natural starch, without chemical grafting, can now be considered for manufacturing innovative biodegradable devices for less-invasive surgery.
Assuntos
Implantes Absorvíveis , Materiais Biocompatíveis/química , Amido/química , Parede Abdominal/cirurgia , Técnicas de Fechamento de Ferimentos Abdominais , Animais , Materiais Biocompatíveis/metabolismo , Materiais Biocompatíveis/efeitos da radiação , Módulo de Elasticidade , Raios gama , Glicerol/química , Masculino , Ratos , Ratos Wistar , Solanum tuberosum/química , Amido/metabolismo , Esterilização , Estresse Mecânico , TemperaturaRESUMO
The grafting of poly(sodium styrene sulfonate) (pNaSS) onto ozone-treated poly(ethylene terephthalate) (PET) fabric surfaces was characterized by X-ray photoelectron spectroscopy and toluidine blue colorimetry. Significant amounts of pNaSS were grafted over the range of experimental conditions examined in this study (30-120 min of ozonation, reaction at 65 or 70 degrees C, and reaction times up to 240 min). Within these ranges the amount of grafted pNaSS increased with both ozonation time and reaction temperature. The amount of grafted pNaSS increased over the first 60 min of reaction, then remained relatively constant from 60 to 240 min. For the biological experiments pNaSS-grafted samples were prepared with 30 min of ozonation and 60 min of reaction at a grafting temperature of 70 degrees C. The ozonation time was limited to 30 min to minimize any possible degradation of the PET fabrics by the ozonation treatment. The pNaSS-grafted PET surface adsorbed a factor of 4 more compared to the nongrafted surfaces. The strength of fibroblast adhesion was an order of magnitude higher on pNaSS-grafted PET fabrics compared to that on nongrafted PET fabrics. This difference in the cell attachment was correlated to the cell spreading, which was better and more homogeneous on the grafted fibers compared to the nongrafted fibers. Fibroblasts adhered more strongly on surfaces precoated with normal human plasma compared to surfaces precoated with 10% fetal calf serum in Dulbecco's modified Eagle's medium.
Assuntos
Polietilenotereftalatos/química , Adsorção , Adesão Celular/efeitos dos fármacos , Linhagem Celular , Proliferação de Células/efeitos dos fármacos , Forma Celular/efeitos dos fármacos , Humanos , Cinética , Ozônio/química , Polietilenotereftalatos/farmacologia , Poliestirenos/química , Albumina Sérica/químicaRESUMO
The anterior cruciate ligament (ACL) is the most important ligament for the knee stabilization. Unfortunately, it is also the most commonly injured. Synthetic polymers such as polyethylene terephthalate (PET) are widely used to fabricate ligament prostheses. In this study, we reported how to graft poly(sodium styrene sulfonate) (pNaSS) onto PET fabrics used to prepare ligament at a rate of about 4.5 x 10(-6) mol/g. In this study, we analyzed the morphology of human fibroblast MacCoy adhering onto the pNaSS grafted fabrics. Cell adhesion strength onto grafted and non grafted fabrics previously adsorbed with serum proteins was also evaluated after the application of shear stresses. Results showed that human fibroblast MacCoy adhered more strongly on the pNaSS grafted fabric compared to the non grafted one. The cell spreading is well on the grafted fiber even after the shear stress application: about 65% of cells remained adhered on the pNaSS grafted fabric as compared to 32% on the non grafted one. We concluded that Mac Coy human fibroblast cells strongly adhered onto the pNaSS functionalized PET prosthesis surface and showed a better spread cell morphology as well as a more homogeneous distribution than on the non grafted sample surfaces.
Assuntos
Fibroblastos/citologia , Fibroblastos/fisiologia , Ligamentos Articulares/citologia , Ligamentos Articulares/crescimento & desenvolvimento , Polietilenoglicóis/química , Polímeros/química , Ácidos Sulfônicos/química , Engenharia Tecidual/métodos , Materiais Biocompatíveis/química , Técnicas de Cultura de Células/métodos , Proliferação de Células , Células Cultivadas , Humanos , Teste de Materiais , PolietilenotereftalatosRESUMO
The recognition of DNA-like phosphorylated polymers by anti-DNA antibodies from the plasma of systemic lupus erythematosus patients was evidenced a few years ago by our research group. However, the radioimmunological Farr assay used for the assessment of anti-DNA antibodies adsorption was not sensitive enough to give accurate results, particularly in the case of weak levels of antibodies. An alternative method based on the use of radiolabelled species was set up in order to check the validity of previous results. Polystyrene resins with different levels in phosphate groups substitution were assessed with regard to their interactions with anti-DNA antibodies. Results show that the anti-DNA antibodies affinity is dependent on the composition of the polymers and reaches a maximum for a composition of 17.5-22.5 mol of phosphorus per 100 mol of monomeric units. This composition corresponds to the DNA-like polymer previously described. A computer-assisted method was used in order to have an insight into the structure of the active sites responsible for the DNA-like behaviour of this polymer. Numerical simulations of the phosphorylation reaction were performed using a Monte Carlo method, taking the structure predictions and the environment of the phosphorylated units into account. A number of thus generated virtual polymers correlated with the experimental results of the adsorption of anti-DNA antibodies. The chemical structure of the active site was determined by computations introducing selected hypotheses on the structure of the phosphorylated units. Moreover, since the number of active sites is directly related to the number of adsorbed anti-DNA antibodies in the experimental results, the most probable structure of the active sites is proposed and compared to a fragment of DNA. Conclusions are that the distances between the phosphate groups in the active sites of the DNA-like polymer and in the DNA fragment are similar. Optimal conditions for the purification of SLE sera by highly specific liquid chromatography using phosphorylated polystyrene resins of precise compositions as stationary phases can thus be envisaged, as well as a new method for the detection of anti-DNA antibodies.
Assuntos
Reações Antígeno-Anticorpo , DNA/imunologia , Lúpus Eritematoso Sistêmico/imunologia , Poliestirenos , Adsorção , Especificidade de Anticorpos , Simulação por Computador , Epitopos , Humanos , Imunoglobulinas/metabolismo , Estrutura Molecular , Método de Monte Carlo , FosforilaçãoRESUMO
BACKGROUND: Migration and proliferation of lens epithelial cells (LECs) are based on interactions between cellular integrins and extracellular matrix proteins (ECMs). We were able to design polymers substituted with COO- and SO3- groups that counteract LEC proliferation through modification of the integrin/ECM interaction. The objective of this study was to compare the cell proliferation-inhibiting properties of differently substituted copolymers with those of a homopolymer. METHODS: Polymers were synthesized by radical polymerization and characterized by nuclear resonance spectroscopy. Second-passage rabbit LECs were cultured either on PMMA homopolymers (control) or on substituted PMMA copolymers. Cells were counted on days 2, 7, and 17. Cell vitality was evaluated by trypan blue staining. Experiments were run in quadruplicate. Statistical analysis was performed using the Wilcoxon test and the Mann-Whitney U-test. RESULTS: Compared with control, cells cultured on copolymers grew to significantly lower cell numbers. The inhibitory effect became evident at day 2 after seeding and persisted throughout the experiment. Different ratios of COO-/SO3- substitutions yielded different grades of inhibition. No toxic effect was seen on rabbit LECs. CONCLUSIONS: The tested copolymers inhibit cell proliferation and are nontoxic. Further evaluation could lead to the development of new intraocular lens materials that prevent secondary cataract.