Valorization of Sour Cherry Kernels: Extraction of Polyphenols Using Natural Deep Eutectic Solvents (NADESs).

The objective of this research was to optimize the natural deep eutectic solvent (NADES) extraction process from sour cherry kernels (Prunus cerasus L.). For polyphenol isolation, conventional solid-liquid extraction was employed using different concentrations of ethanol (0, 10, 20, 30, 40, 50, 60, 70, 80, 90, and 96%), as well as the innovative NADES extraction technique. In the initial phase of the research, a screening of 10 different NADESs was conducted, while extraction was carried out under constant parameters (50 °C, 1:20 w/w, 60 min). NADES 4, composed of lactic acid and glucose in a molar ratio of 5:1, exhibited the highest efficiency in the polyphenol isolation. In the subsequent phase of the research, response surface methodology (RSM) was utilized to optimize the extraction process. Three independent variables, namely temperature, extraction time, and solid-liquid (S/L) ratio, were examined at three different levels. The extracted samples were analyzed for total phenol (TP) and antioxidant activity using the DPPH, ABTS, and FRAP assays. ANOVA and descriptive statistics (R2 and CV) were performed to fit the applied model. According to RSM, the optimal extraction conditions were determined as follows: temperature of 70 °C, extraction time of 161 min, and S/L ratio of 1:25 w/w.

Isolation of Garlic Bioactives by Pressurized Liquid and Subcritical Water Extraction.

Garlic (Allium sativum L.) is widely used in various food products and traditional medicine. Besides unique taste and flavour, it is well known for its chemical profile and bioactive potential. The aim of this study was to apply subcritical water extraction (SWE) and pressurized liquid extraction (PLE) for the extraction of bioactive compounds from the Ranco genotype of garlic. Moreover, PLE process was optimized using response surface methodology (RSM) in order to determine effects and optimize ethanol concentration (45-75%), number of cycles (1-3), extraction time (1-3 min) and temperature (70-110 °C) for maximized total phenols content (TP) and antioxidant activity evaluated by various in vitro assays. Furthermore, temperature effect in SWE process on all responses was evaluated, while allicin content (AC), as a major organosulphur compound, was determined in all samples. Results indicated that PLE provided tremendous advantage over SWE in terms of improved yield and antioxidant activity of garlic extracts. Therefore, high-pressure processes could be used as clean and green procedures for the isolation of garlic bioactives.

Comparative characterization of sugar beet fibers to sugar beet pectin and octenyl succinic anhydride modified maltodextrin in aqueous solutions using viscometry, conductometry, tensiometry and component analysis.

BACKGROUND: Knowledge about specific functional characteristics, such as viscosimetric, conductometric, tensiometric and structural properties of polysaccharide aqueous solutions is highly important in the successful and adequate application in food emulsion formulation. For the first time detailed characterization of sugar beet fibers aqueous solutions in comparison to high molecular weight (sugar beet pectin) and low molecular weight [octenyl succinic anhydride (OSA) maltodextrin] hydrocolloids/stabilizers was performed through viscometry, conductometry, tensiometry and component analysis. RESULTS: Sugar beet fibers and its water-soluble fraction were investigated. All sugar beet fiber samples showed substantial surface-active properties but different effect on the viscosity values of aqueous solutions. Sugar beet pectin had higher impact on aqueous solutions viscosity values compared to sugar beet fiber samples. Structural bonding between investigated polysaccharides were evaluated through conductometric measurements. Intermolecular linking and probable embedding of OSA maltodextrin molecules into the sugar beet fiber complex structure was detected in conductometric studies. The increased concentration of sugar beet fibers in the presence of sugar beet pectin led to the accelerated increase in specific conductivity values indicating effects of 'macromolecular crowding', intermolecular and intramolecular conformation changes and charge formation. CONCLUSIONS: Detailed characterization of sugar beet fibers provided scientific insight towards fundamental characteristics of sugar beet fiber aqueous solutions. The presented characteristics are particularly applicable in the field of food emulsion stabilization due to the presented surface-active properties of sugar beet fibers as well as specific characteristics of investigated multi-polysaccharide systems. © 2022 Society of Chemical Industry.

Natural Deep Eutectic Solvent (NADES) Extraction Improves Polyphenol Yield and Antioxidant Activity of Wild Thyme (Thymus serpyllum L.) Extracts.

Wild thyme (Thymus serpyllum L.) herbal dust has been recognized as a potential underutilized resource for the recovery of antioxidants. The aim of this paper was to optimize natural deep eutectic solvent (NADES) extraction of polyphenols to obtain improved antioxidant activity of extracts determined by selected in vitro assays (DPPH, FRAP, and ABTS). Twenty different NADES systems were investigated in the first step of the screening of the extraction solvent and l-proline (Pro)-glycerine (Gly) based solvents provided the best results. Preliminary experiments organized by 25-1 fractional factorial design narrowed down the number of extraction factors from five (temperature, extraction time, NADES type, water content and L/S ratio) to three and determined their experimental domain for the final step. A face-centered central composite design with temperature (40-55-70 °C), extraction time (60-120-180 min) and L/S ratio (10-20-30 g NADES/g sample) was applied for influence analysis and process optimization. Multi-response optimization suggested a temperature of 65 °C, time of extraction of 180 min and L/S ratio of 28 g NADES/g DW as optimal extraction parameters. Experimental validation confirmed good agreement between experimental and predicted results in the extract obtained at optimal conditions and the interactions in the most suitable NADES (N16; Pro-Gly-H2O; 1:2:1) were confirmed by the 1H-NMR.

Pressurized-Liquid Extraction as an Efficient Method for Valorization of Thymus serpyllum Herbal Dust towards Sustainable Production of Antioxidants.

The aim of this study was to valorize Thymus serpyllum herbal dust, a particular fraction distinguished as an industrial waste from filter-tea production. Pressurized liquid extraction (PLE) was used with the aim of overcoming certain obstacles of conventional extraction techniques in terms of shortening extraction time, reducing solvent consumption and energy costs, using "green" solvents and obtaining high yield and quality products. In order to optimize PLE of T. serpyllum herbal dust, the preliminary screening of the independent variables in order to define the most influential parameters and their domain was done first. After the screening, the optimization study using the face-centered central composite experimental design (CCD) with response surface methodology (RSM) was implemented. Additionally, taking into account the high awareness of the positive influence of antioxidants on the human health and associating it with high content of polyphenolic compounds in various members of Lamiaceae family, PLE has proven to be a great approach for antioxidants recovery from T. serpyllum herbal dust.

Extraction of Peppermint Essential Oils and Lipophilic Compounds: Assessment of Process Kinetics and Environmental Impacts with Multiple Techniques.

Consumers are becoming more mindful of their well-being. Increasing awareness of the many beneficial properties of peppermint essential oil (EO) has significantly increased product sales in recent years. Hydrodistillation (HD), a proven conventional method, and a possible alternative in the form of microwave-assisted hydrodistillation (MWHD) have been used to isolate peppermint EO. Standard Soxhlet and alternatively supercritical fluid (SFE), microwave-assisted, and ultrasound-assisted extraction separated the lipid extracts. The distillations employed various power settings, and the EO yield varied from 0.15 to 0.80%. The estimated environmental impact in terms of electricity consumption and CO2 emissions suggested that MWHD is an energy efficient way to reduce CO2 emissions. Different extraction methods and solvent properties affected the lipid extract yield, which ranged from 2.55 to 5.36%. According to the corresponding values of statistical parameters, empiric mathematical models were successfully applied to model the kinetics of MWHD and SFE processes.

Suitability of the Cyclic Voltammetry Measurements and DPPH• Spectrophotometric Assay to Determine the Antioxidant Capacity of Food-Grade Oenological Tannins.

Twenty commercially available oenological tannins (including hydrolysable and condensed) were assessed for their antiradical/reducing activity, comparing two analytical approaches: The 2,2-diphenyl-1-picrylhydrazyl (DPPH•) radical scavenging spectrophotometric assay and the cyclic voltammetry (CV) electrochemical method. Electrochemical measurements were performed over a -200 mV-500 mV scan range, and integrated anodic currents to 500 mV were used to build a calibration graph with (+)-catechin as a reference standard (linear range: From 0.0078 to 1 mM, R2 = 0.9887). The CV results were compared with the DPPH• assay (expressed as % of radical scavenged in time), showing high correlation due to the similarity of the chemical mechanisms underlying both methods involving polyphenolic compounds as reductants. Improved correlation was observed by increasing the incubation time with DPPH• to 24 h (R2 = 0.925), demonstrating that the spectrophotometric method requires a long-term incubation to complete the scavenging reaction when high-molecular weight tannins are involved; this constraint has been overcome by using instant CV measurements. We concluded that the CV represents a valid alternative to the DPPH• colorimetric assay, taking advantage of fast analysis and control on the experimental conditions and, because of these properties, it can assist the quality control along the supply chain.

PhInd-Database on Polyphenol Content in Agri-Food By-Products and Waste: Features of the Database.

Timely access to topic-relevant datasets is of paramount importance for the development of any successful strategy (food waste reduction strategy), since datasets illuminate opportunities, challenges and development paths. PhInd is the first comprehensive database on polyphenol content in plant-based by-products from the agri-food sector or the wastewater sector and was developed using peer-reviewed papers published in the period of 2015-2021. In total, >450 scientific manuscripts and >6000 compound entries were included. Database inclusion criteria were polyphenol contents = determined using HPLC/UHPLC quantitative methods. PhInd can be explored through several criteria which are either 'open' or checkboxes. Criteria are given in subsections: (a) plant source; (b) by-product industrial processing; (c) pre-treatment of by-products before the isolation of polyphenols; and (d) the extraction step of polyphenols. Database search results could be explored on the website directly or by downloading Excel files and graphs. This unique database content is beneficial to stakeholders-the food industry, academia, government and citizens.

Eco-Friendly Extraction: A green approach to maximizing bioactive extraction from pumpkin (Curcubita moschata L.).

The research focused on optimizing the accelerated solvent extraction (ASE) of carotenoids and polyphenols from pumpkin powder. The study optimized accelerated solvent extraction (ASE) of carotenoids and polyphenols from pumpkin powder. Using a mix of standard score (SS) and artificial neural network (ANN) methods, the extraction process was fine-tuned. The ANN model assessed extraction parameters' significance, achieving high predictability for total carotenoid content (TCC), total phenolic content (TPC), and free radical scavenging capacity (DPPH and ABTS methods). The analysis highlighted the most effective extraction at 50 % concentration, 120 °C temperature, 5 min duration, and 2 cycles, yielding high carotenoid and phenolic content (TCC 571.49 µg/g, TPC 7.85 mg GAE/g). HPLC-DAD profiles of the optimized ASE extract confirmed major carotenoids and phenolic compounds. Strong correlations were found between bioactive compounds and antioxidant activity, emphasizing potential health benefits.

Polycyclic aromatic hydrocarbon (PAH) phytoaccumulation in urban areas by Platanus × acerifolia, Celtis australis, and Tilia grandifolia leaves and branches.

Polycyclic aromatic hydrocarbon (PAH) concentrations in the leaves and 1-year-old branches of three common tree species growing in a middle-sized city located in a moderate climate zone were estimated. For this purpose, PAH phytoaccumulation in Platanus × acerifolia, Celtis australis, and Tilia grandifolia species from highly urbanized, traffic congested, and highly PAH-contaminated streets was compared with trees from non-contaminated parks in the same urban core. The gathered data was used to define 17 PAH profiles, identify the main PAH pollution emission sources, and determine the organ and species specificity of PAHs accumulation. Due to the direct absorption of polluted air via stomata, the leaves accumulated up to 30% more PAHs compared to the 1-year-old branches. As expected, PAH concentrations were much higher in street trees, while heavy weight PAHs (with five and six rings) were accumulated in the highest concentrations. The highest foliar Σ17 PAH concentrations were detected in street-grown C. australis, followed by P. acerifolia and T. grandifolia (502.68, 488.45, and 339.47 ng g-1 dry weight (DW), respectively). The same pattern was noted for Σ17 PAHs in branches (414.89, 327.58, and 342.99 ng g-1 DW, respectively). Thus, T. grandifolia emerged as the least effective PAH sink as it accumulated up to ~ 40% less PAHs than P. acerifolia and C. australis leaves/branches. Among the 17 tracked PAHs, benzo[a]anthracene, benzo[a]pyrene, dibenzo[a,h]anthracene, and pyrene were found to have accumulated in the highest concentrations in all analyzed species irrespective of the site, and accounted for more than 50% of the total detected PAHs. Finally, a "black box" about species and organ specificity, as well as specific drivers that limit PAHs uptake capacity by trees, was opened, while this work provides insights into further PAH phytoremediation strategies.

Exploring the composition and potential uses of four hops varieties through different extraction techniques.

Hydrophilic, lipophilic extracts and essential oil of four hops varieties from Slovenia were examined in this study. Lipophilic extracts were obtained by supercritical extraction (SFE), while for hydrophilic extracts ultrasound and microwave extraction were employed. Essential oils were isolated by the hydrodistillation process. The lipophilic composition of essential oils and lipophilic extracts was determined by GC-MS analysis. Monoterpenes and sesquiterpene hydrocarbons were the most abundant class of compounds in oils (62.27-79.65 %), with myrcene being the most abundant constituent. Limonene and trans-caryophyllene were two terpenes determined in all essential oils while only trans-caryophyllene was detected in SFE samples. Antioxidant, antimicrobial, and cytotoxic activity, determined by applying in vitro assays, was more influenced by extraction technique than by varieties. Molecular docking was carried out to gain insight into the potential cancer protein targets BCL-2 and MMP9, whereby humulene epoxide II displayed good binding configuration within the cavities of the two proteins.

Effects of Dill (Anethum graveolens) Essential Oil and Lipid Extracts as Novel Antioxidants and Antimicrobial Agents on the Quality of Beef Burger.

Dill (Anethum graveolens L.) essential oil (DEO) obtained by hydrodistillation (HD) and lipid extracts (DSE1 and DSE2) obtained by supercritical CO2 extraction (SFE) were used as potential antioxidants and antimicrobial agents in beef burgers at two different concentrations (0.075 and 0.15 µL/g). The chemical profile of the lipid extracts and their in vitro antimicrobial activity against the common pathogens E. coli and L. monocytogenes (MIC and MBC) were determined. The quality and shelf life of the burgers were monitored through (lipid oxidation-TBARS test; protein oxidation-thiol group content and selected biogenic amine content) and microbiological quality (Enterobacteriaceae-EB, aerobic mesophilic bacteria-TAMB, lactic acid bacteria-LAB). Dill lipid extracts (DEO and DSE1) significantly (p < 0.05) reduced lipid oxidation and protein oxidation in beef burgers, while the lipid extract (DSE2) showed pro-oxidative effects. The strongest antimicrobial potential against EB was found in SFE1150 (1.15 log cfu/g). Putrescine, cadaverine, histamine, and tyramine were not detected in any of the analyzed samples during the storage period, while the total content of biogenic amines ranged from 21.4 mg/kg to 285 mg/kg. Generally, it can be concluded that dill essential oil (DEO) and extract DSE1 can be used as novel natural additives in minced-meat products.

Sour Cherry Pomace Valorization as a Bakery Fruit Filling: Chemical Composition, Bioactivity, Quality and Sensory Properties.

Sour cherry pomace filling (SCPF) and commercial sour cherry filling (CSCF) produced on a semi-industrial scale were tested and compared in terms of food safety, chemical composition, bioactivity, quality, sensory properties and thermal stability. Both samples were safe for human consumption, thermally stable and there was a lack of syneresis. SCPF had a significantly higher fiber concentration (3.79 g/100 g) due to higher skin fraction and is considered a "source of fibers". The higher skin fraction in SCPF also resulted in a higher mineral quantity (Fe-3.83 mg/kg fw) in comparison to CSCF (Fe-2.87 mg/kg fw). Anthocyanins concentration was lower in SCPF (7.58 mg CGE/100 g fw), suggesting that a significant amount of anthocyanins was removed from SC skin during juice extraction. However, there was a lack of statistical differences in antioxidant activity between the two fillings. CSCF was more spreadable, not as firm and less sticky, with lower storage and loss modulus values than SCPF. However, both fillings exhibited acceptable rheological and textural behaviour for fruit fillings. According to the consumer pastry test, 28 participants preferred each pastry; thus, there was a lack of preference toward any of the tested samples. SCP could be used as a raw material for the bakery fruit fillings industry, which leads to the valorization of food industry by-products.

Antibacterial Activity of Selected Essential Oils against Foodborne Pathogens and Their Application in Fresh Turkey Sausages.

Essential oils (EOs) isolated from different plant materials, namely Origanum majorana L., Satureja hortensis L., and Satureja montana L. (OMEO, SHEO, and SMEO, respectively), were used in fresh turkey sausage processing. The chemical composition and in vitro antimicrobial potential of selected EOs and their mixture were determined. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) against foodborne pathogens (Escherichia coli, Salmonella Enteritidis, and Listeria monocytogenes) ranged in the interval of 0.44-7.1 µL/mL. Fresh turkey sausages were produced with EOs addition and marked as follows: TOMEO-0.150 µL/g OMEO; TSHEO-0.150 µL/g SHEO; TSMEO-0.150 µL/g SMEO; TEOM-0.050 µL/g OMEO, 0.050 µL/g SHEO and 0.050 µL/g SMEO, and control (C) (without EOs). Microbiological profile and biogenic amines content in fresh turkey sausages were recorded during storage. The selected EOs and their mixture efficiently reduced bacterial growth and biogenic amines formation and accumulation. The lowest Enterobacteriaceae count and total biogenic amine (BA) concentration were determined through treatment TSHEO. The results of this study show that selected EOs could be useful in fresh turkey sausage processing in order to improve safety and shelf-life.

Essential Oils from Apiaceae, Asteraceae, Cupressaceae and Lamiaceae Families Grown in Serbia: Comparative Chemical Profiling with In Vitro Antioxidant Activity.

The aim of the present study was to investigate the chemical profile and antioxidant activity of essential oils obtained from the most commonly grown plant species in Serbia. Aromatic and medicinal plants from Lamiaceae (Mentha x Piperita, Ocimum basilicum, Origanum majorana, Origanum vulgare, Salvia officinalis, Satureja hortensis, Satureja montana and Thymus vulgaris), Asteraceae (Ehinacea purpurea and Matricaria chamomilla), Apiaceae (Anethum graveolens, Carum carvi, Foeniculum vulgare, Petroselinum crispum and Pimpinella anisum) and Cupressaceae (Juniperus comunis) were selected as raw material for essential oils (EOs)' isolation. Hydrodistillation (HD) was used for the isolation of EOs while they were evaluated in terms of yield and terpenoid profiles by GC-MS. In vitro radical scavenging DPPH and ABTS+ radical activities were carried out for all EOs. Finally, a principal component analysis (PCA) was performed with the experimental results of the composition and antioxidant activity of the EOs, which showed a clear distinction between the selected plant species for the aforementioned responses. This work represents a screening tool for the selection of other EO candidates for further processing by emerging extraction techniques and the use of EOs as natural additives for meat products.

Development of a Pressurized Green Liquid Extraction Procedure to Recover Antioxidant Bioactive Compounds from Strawberry Tree Fruit (Arbutus unedo L.).

Strawberry tree fruits (Arbutus unedo L.) are a natural source of valuable biologically active compounds. Therefore, the aim of this work was to develop a green extraction approach using pressurized liquid extraction (PLE) to provide the highest yield of bioactive compounds. Different extraction solvents (distilled water, 50% and 96% ethanol) and different PLE parameters were investigated: temperature (40, 80, and 120 °C), static extraction time (5 and 10 min), and number of cycles (1 and 2). Total phenolic contents (TPC), hydroxycinnamic acids (HCA), flavonols (FL), total flavonoids (TF), condensed tannins (CT), and antioxidant capacity (DPPH and FRAP) were determined in PLE extracts. Solvent type, temperature, static extraction time, and number of cycles had a statistically significant effect on all bioactive compounds and antioxidant capacity (p ≤ 0.05). All bioactive compounds were positively correlated with temperature, except for TPC and DPPH. For all polyphenols studied, the optimal PLE parameters were a temperature of 120 °C, a static extraction time of 10 min and 2 cycles. The best solvent for most bioactive compounds was 96% ethanol, except for TPC, for which 50% ethanol was better. This study suggests that PLE is a promising tool to intensify the extraction of bioactive compounds from strawberry tree fruits.

Chemical Composition, Antioxidant Potential, and Nutritional Evaluation of Cultivated Sorghum Grains: A Combined Experimental, Theoretical, and Multivariate Analysis.

Sorghum grain (Sorghum bicolor L. Moench) is a gluten-free cereal with excellent nutritional value and is a good source of antioxidants, including polyphenols, as well as minerals with proven health benefits. Herein, the phenolic composition, elemental profile, and antioxidant activity of sixteen food-grade sorghum grains (S1-S16) grown under agroecological conditions in Serbia were determined. Nine phenolic compounds characteristic of sorghum grains, such as luteolinidin, 5-methoxyluteolinidin, luteolidin derivative, luteolidin glucoside, apigeninidin, 7-methoxyapigeninidin, apigeninidin glucoside, and cyanidin derivative, were quantified. The antioxidant potential of the analyzed sorghum grains was evaluated by UV/Vis (DPPH, ABTS, and FRAP) and Electron Paramagnetic Resonance spectroscopy (hydroxyl and ascorbyl radical scavenging assays). The content of macro- and microelements was determined by Inductively Coupled Plasma Optical Emission spectroscopy. Theoretical daily intakes of selected major and trace elements were assessed and compared with the Recommended Daily Allowance or Adequate Intake. Sample S8 had the highest amount of phenolic compounds, while S4, S6, and S8 exhibited the strongest antioxidative potential. The sorghum studied could completely satisfy the daily needs of macro- (K, Mg, and P) and microelements (Se, Zn, Fe). Pattern recognition techniques confirmed the discrimination of samples based on phenolic profile and elemental analysis and recognized the main markers responsible for differences between the investigated samples. The reaction between hydroxyl radicals and luteolinidin/apigeninidin was investigated by Density Functional Theory and thermodynamically preferred mechanism was determined.

Polyphenols Recovery from Thymus serpyllum Industrial Waste Using Microwave-Assisted Extraction-Comparative RSM and ANN Approach for Process Optimization.

The aim of this study was to valorize Thymus serpyllum L. herbal dust, the particular fraction distinguished as industrial waste from filter-tea production. This work demonstrated comparable analysis considering model fitting, influence analysis and optimization of microwave-assisted extraction (MAE) of bioactive compounds from the aforementioned herbal dust using face-centered central composite experimental design within the response surface methodology (RSM), as well as artificial neural networks (ANN). In order to increase yield and amount of compounds of interest and minimize solvent, time and energy consumption, the ethanol concentration (45, 60 and 75%), extraction time (5, 12.5 and 20 min), liquid-solid ratio (10, 20 and 30 mL/g) and irradiation power (400, 600 and 800 W) were used as independent variables. Total extraction yield (Y), total phenols yield (TP), as well as antioxidant activity parameters obtained by DPPH and ABTS assays, were selected as responses. It could be concluded that the MAE technique is an efficient approach for the extraction of biologically active compounds from T. serpyllum herbal dust, which represents a high-value source of natural antioxidants with great potential for further use in various forms within different branches of industry.

Lipid Extracts Obtained by Supercritical Fluid Extraction and Their Application in Meat Products.

Supercritical fluid extraction (SFE) has been recognized as the green and clean technique without any negative impact on the environment. Although this technique has shown high selectivity towards lipophilic bioactive compounds, very few case studies on the application of these extracts in final products and different food matrices were observed. Considering the recent developments in food science and the increasing application of supercritical extracts in meat products in the last decade (2012-2022), the aim of this manuscript was to provide a systematic review of the lipid extracts and bioactives successfully obtained by supercritical fluid extraction and their application in meat products as antioxidant and/or antimicrobial agents. Lipophilic bioactives from natural resources were explained in the first step, which was followed by the fundamentals of supercritical fluid extraction and application on recovery of these bioactives. Finally, the application of natural extracts and bioactives obtained by this technique as functional additives in meat and meat products were thoroughly discussed in order to review the state-of-the-art techniques and set the challenges for further studies.

Isolation of Cherry Seed Oil Using Conventional Techniques and Supercritical Fluid Extraction.

This study aims to compare the suitability of three extraction techniques (cold pressing, Soxhlet and supercritical fluid extraction (SFE)) to isolate oil from cherry seeds. Oils were examined in terms of extraction yield, fatty acids profile, tocopherols yield and antioxidant activity. Additionally, influence of SFE parameters was evaluated using one-factor-at-a-time design with pressure (200−350 bar), temperature (40−70 °C), flow rate (0.2−0.4 kg/h) and particle size (<800 µm and >800 µm). Oil yields ranged from 2.50% to 13.02%, whereas the highest yield was achieved with SFE. Samples were rich in polyunsaturated fatty acids, regardless of the applied extraction technique. The main fatty acids were linoleic (46.32−47.29%), oleic (40.89−41.65%), palmitic (6.56−8.00%) and stearic (2.21−2.30%) acid. Total tocopherols yield was between 16.63 mg/100 g oil and 60.61 mg/100 g oil, and highest yield was achieved with SFE. Among the tocopherols, γ-tocopherol was the most abundant, followed by α-, δ- and ß-tocopherol. Antioxidant activity was determined using 1,1-diphenyl-2-picrylhydrazyl (DPPH) and 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonic) cation (ABTS) assays, and the results indicated that SFE extracts exhibited better or comparable antioxidant potential compared to traditional techniques. The comparison between modern and conventional extractions for oil recovery demonstrates pros and cons for the possibility of industrial application.