Calculation method for novel upright CT scanner isodose curves.

PURPOSE: A computational method based on Monte-Carlo calculations is presented and used to calculate isodose curves for a new upright and tilting CT scanner useful for radiation protection purposes. METHODS: The TOPAS code platform with imported CAD files for key components was used to construct a calculation space for the scanner. A sphere of water acts as the patient would by creating scatter out of the bore. Maximum intensity dose maps are calculated for various possible tilt angles to make sure radiation protection for site planning uses the maximum possible dose everywhere. RESULTS: The resulting maximum intensity isodose lines are more rounded than ones for just a single tilt angle and so closer to isotropic. These maximum intensity curves are closer to the isotropic assumption used in CTDI or DLP based methods of site planning and radiation protection. The isodose lines are similar to those of a standard CT scanner, just tilted upwards. There is more metal above the beam that lessens the dose above versus below isocenter. CONCLUSION: Aside from the orientation, this upright scanner is very similar to a typical CT scanner, and nothing different for shielding needs to be done for this new upright tilting CT scanner, because an isotropic scatter source is often assumed for any CT scanner.

[FreeArcs Knife: a Novel Stereotactic Radiosurgery System].

This paper describes the design of an innovative linear accelerator image-guided radiosurgery (IGRS) device, which is based on a composite twofold rotary gantry structure. The paper discusses five aspects of the innovative device: its overall composition, the safety net space created by the accelerator radiation head as it rotates around the patient's longitudinal axis, the non-coplanar spherical coverage in the direction of the incidence angle for quasi-4π delivery, the structural features of the composite twofold rotary gantry, and the processes of treatment planning and implementation. It elaborates on the device's manufacturing feasibility, safety, effectiveness, accuracy, and efficiency. The conclusion is that this innovative device design holds significant development value and market promotion potential.

Emerging technologies for cancer therapy using accelerated particles.

Cancer therapy with accelerated charged particles is one of the most valuable biomedical applications of nuclear physics. The technology has vastly evolved in the past 50 years, the number of clinical centers is exponentially growing, and recent clinical results support the physics and radiobiology rationale that particles should be less toxic and more effective than conventional X-rays for many cancer patients. Charged particles are also the most mature technology for clinical translation of ultra-high dose rate (FLASH) radiotherapy. However, the fraction of patients treated with accelerated particles is still very small and the therapy is only applied to a few solid cancer indications. The growth of particle therapy strongly depends on technological innovations aiming to make the therapy cheaper, more conformal and faster. The most promising solutions to reach these goals are superconductive magnets to build compact accelerators; gantryless beam delivery; online image-guidance and adaptive therapy with the support of machine learning algorithms; and high-intensity accelerators coupled to online imaging. Large international collaborations are needed to hasten the clinical translation of the research results.

Dose rate versus gantry speed performance evaluation for slow gantry speeds using DICOM RT plans.

PURPOSE: Varian provides a DICOM RT Plan file that users can deliver to the electronic portal imaging device (EPID) panel to confirm the linear accelerator delivers consistent dose output across several regions of interest for varying dose rates and gantry speeds (DRGS). This work investigates if (a) the vendor-provided DRGS DICOM RT Plan is valid within the gantry speed range of stereotactic body radiation therapy (SBRT) treatments, and (b) if output constancy is maintained at those gantry speeds on a TrueBeam. METHODS: Python code was written to iterate through all control points in the DICOM RT Plan files for 21 SBRT patients and the MU per degree values were calculated for each control point. A histogram was generated to illustrate how MU per degree was distributed among the control points from the patient plans. Then, the total number of MUs was increased in the vendor-provided DRGS DICOM file to make a "modified DRGS DICOM RT Plan," which surpasses the maximum MU per degree value found in the patient plans, forcing the gantry to travel at slow speeds and deliver more MU per degree over the same arc length (representative of those during SBRT treatment delivery). The modified DRGS DICOM RT Plan file was then delivered on a TrueBeam to acquire EPID images of the dose distribution. The EPID images were analyzed with Pylinac, a Python library that analyzes DICOM RT images acquired during routine linac QA. RESULTS: Over 83% of patient DICOM RT Plan control points had MU per degree values greater than the MU per degree values in the vendor-provided DRGS DICOM file. The Pylinac analysis of the EPID-acquired images found a maximum deviation of 0.4% from machine baselines. CONCLUSIONS: The modified DRGS DICOM file can be used to determine if a TrueBeam linac is operating within specifications even when very low gantry speeds are reached.

Fuzzy analytic hierarchy process-based risk priority number for risk assessments of commissioning process of a ring gantry LINAC.

PURPOSE: We propose a fuzzy analytic hierarchy process (AHP)-based risk priority number (RPN) method in failure modes and effects analysis (FMEA) to overcome the shortcomings of traditional RPN-based FMEA. Our research group has previously published the FMEA to mitigate the failure modes (FMs) for the commissioning process of a ring gantry LINAC. However, inter-relationships among FMs were observed in high ranked FMs due to a heavy reliance on imaging system. METHODS: Fuzzy AHP was applied to determine relative weights of risk impacts based on inter-relationships among FMs. Since the time sequence dependency is a major factor for risk factors, a hierarchical structure of AHP was used to reflect the directional impacts such as causal influence and feedback loop. Two fuzzy weighted RPNs, called (RPNW and FRPNW , were calculated depending on the input values of severity (S), occurrence (O), and probability of not being detected (D) from the evaluators. The RPNW used numerical values, whereas the fuzzy values were used for FRPNW . Both RPNs were calculated by multiplying the weighted O, S, and D using the fuzzy AHP method. RESULTS: The differences between the two fuzzy RPN rankings are due to inherent fuzzy uncertainty and deviations in O, S, and D values submitted by the evaluators. Considering all results of traditional and fuzzy-based FMEA, the two most highly ranked FMs were identified: errors in determining the non-isocentric SSD and SSD from MV images because of the unique features of the ring gantry LINAC. CONCLUSION: This study has demonstrated the feasibility of the use of a fuzzy AHP-based RPN to perform comprehensive analysis and prioritization of FMs. The risk analysis using fuzzy AHP can be improved and/or refined based on the department's specific workflow and clinical preferences taking various priority weighting approaches into account.

Modeling Dual-Drive Gantry Stages with Heavy-Load and Optimal Synchronous Controls with Force-Feed-Forward Decoupling.

The application of precision dual-drive gantry stages in intelligent manufacturing is increasing. However, the loads of dual drive motors can be severely inconsistent due to the movement of heavy loads on the horizontal crossbeam, resulting in synchronization errors in the same direction movement of dual-drive motors. This phenomenon affects the machining accuracy of the gantry stage and is an critical problem that should be immediately solved. A novel optimal synchronization control algorithm based on model decoupling is proposed to solve the problem. First, an accurate physical model is established to obtain the essential characteristics of the heavy-load dual-drive gantry stage in which the rigid-flexible coupling dynamic is considered. It includes the crossbeam's linear motion and rotational motion of the non-constant moment of inertia. The established model is verified by using the actual system. By defining the virtual centroid of the crossbeam, the cross-coupling force between dual-drive motors is quantified. Then, the virtual-centroid-based Gantry Synchronization Linear Quadratic Regulator (GSLQR) optimal control and force-Feed-Forward (FF) decoupling control algorithm is proposed. The result of the comparative experiment shows the effectiveness and superiority of the proposed algorithm.

Diagnostic Yield of Incremental Biopsy Cores and Second Lesion Sampling for In-Gantry MRI-Guided Prostate Biopsy.

BACKGROUND. In-gantry MRI-guided biopsy (MRGB) of the prostate has been shown to be more accurate than other targeted prostate biopsy methods. However, the optimal number of cores to obtain during in-gantry MRGB remains undetermined. OBJECTIVE. The purpose of this study was to assess the diagnostic yield of obtaining an incremental number of cores from the primary lesion and of second lesion sampling during in-gantry MRGB of the prostate. METHODS. This retrospective study included 128 men with 163 prostate lesions who underwent in-gantry MRGB between 2016 and 2019. The men had a total of 163 lesions sampled with two or more cores, 121 lesions sampled with three or more cores, and 52 lesions sampled with four or more cores. A total of 40 men underwent sampling of a second lesion. Upgrade on a given core was defined as a greater International Society of Urological Pathology (ISUP) grade group (GG) relative to the previously obtained cores. Clinically significant prostate cancer (csPCa) was defined as ISUP GG 2 or greater. RESULTS. The frequency of any upgrade was 12.9% (21/163) on core 2 versus 10.7% (13/121) on core 3 (p = .29 relative to core 2) and 1.9% (1/52) on core 4 (p = .03 relative to core 3). The frequency of upgrade to csPCa was 7.4% (12/163) on core 2 versus 4.1% (5/121) on core 3 (p = .13 relative to core 2) and 0% (0/52) on core 4 (p = .07 relative to core 3). The frequency of upgrade on core 2 was higher for anterior lesions (p < .001) and lesions with a higher PI-RADS score (p = .007); the frequency of upgrade on core 3 was higher for apical lesions (p = .01) and lesions with a higher PI-RADS score (p = .01). Sampling of a second lesion resulted in an upgrade in a single patient (2.5%; 1/40); both lesions were PI-RADS category 4 and showed csPCa. CONCLUSION. When performing in-gantry MRGB of the prostate, obtaining three cores from the primary lesion is warranted to optimize csPCa diagnosis. Obtaining a fourth core from the primary lesion or sampling a second lesion has very low yield in upgrading cancer diagnoses. CLINICAL IMPACT. To reduce patient discomfort and procedure times, operators may refrain from obtaining more than three cores or second lesion sampling.

Clinical efficiency of operating room-based sliding gantry CT as compared to mobile cone-beam CT-based navigated pedicle screw placement in 853 patients and 6733 screws.

PURPOSE: Multiple solutions for navigation-guided pedicle screw placement are available. However, the efficiency with regard to clinical and resource implications has not yet been analyzed. The present study's aim was to analyze whether an operating room sliding gantry CT (ORCT)-based approach for spinal instrumentation is more efficient than a mobile cone-beam CT (CBCT)-based approach. METHODS: This cohort study included a random sample of 853 patients who underwent spinal instrumentation using ORCT-based or CBCT-based pedicle screw placement due to tumor, degenerative, trauma, infection, or deformity disorders between November 2015 and January 2020. RESULTS: More screws had to be revised intraoperatively in the CBCT group due to insufficient placement (ORCT: 98, 2.8% vs. CBCT: 128, 4.0%; p = 0.0081). The mean time of patients inside the OR (Interval 5 Entry-Exit) was significantly shorter for the ORCT group (ORCT: mean, [95% CI] 256.0, [247.8, 264.3] min, CBCT: 283.0, [274.4, 291.5] min; p < 0.0001) based on shorter times for Interval 2 Positioning-Incision (ORCT: 18.8, [18.1, 19.9] min, CBCT: 33.6, [32.2, 35.5] min; p < 0.0001) and Interval 4 Suture-Exit (ORCT: 24.3, [23.6, 26.1] min, CBCT: 29.3, [27.5, 30.7] min; p < 0.0001). CONCLUSIONS: The choice of imaging technology for navigated pedicle screw placement has significant impact on standard spine procedures even in a high-volume spine center with daily routine in such devices. Particularly with regard to the duration of surgeries, the shorter time needed for preparation and de-positioning in the ORCT group made the main difference, while the accuracy was even higher for the ORCT.

Reduce Patient Treatment wait time in a Proton Beam Facility - A Gatekeeper Approach.

Patient wait time can negatively impact treatment quality in a proton therapy center, where multiple treatment rooms share one proton beam. Wait time increases patient discomfort that can lead to patient motion, dissatisfaction, and longer treatment delay. This study was to develop a patient call-back model that reduced patient wait while efficiently utilizing the proton beam. A "Gatekeeper" logic allowing therapists to adjust the time of a patient's call-back to the treatment room was developed. It uses a two-pronged approach to minimize overlap of long treatment and the possibility of excessive wait in the queue to receive the proton beam. The goal was to reduce the maximum wait time to less than eight minutes per field for a four-room facility. The effectiveness of this logic was evaluated through simulation, and five scenarios were compared. Four scenarios implementing various levels of gatekeeper logic were compared with the original scenario without the logic. The best performing model provided a reduction of the maximum field wait by 26% and met the predefined goal. Adjusting call-back extended the treatment day length by an average of 6 min and a maximum of 12 min in total. The use of this gatekeeper logic significantly reduces patient field wait with minimal impact on treatment day length for a four-room proton facility. A sample interface that adopts this logic for therapists to make informed decision on patient call-back time is demonstrated.

Linac-based stereotactic body radiation therapy for low and intermediate-risk prostate cancer : Long-term results and factors predictive for outcome and toxicity.

INTRODUCTION: Stereotactic body radiation therapy (SBRT) is considered an effective and safe treatment in patients with low- and intermediate-risk prostate cancer (PC). However, due to a lack of long-term follow-up and late toxicity data, this treatment is not universally accepted. The present study aimed to evaluate outcome and early and late toxicity in a cohort of patients with low- and intermediate-risk PC treated prospectively with linear accelerator (linac)-based SBRT. PATIENTS AND METHODS: Patients with low- or intermediate-risk (NCCN criteria) PC were included. All patients received linac-based SBRT to 35 Gy in 5 fractions delivered on alternate days. Endpoints were toxicity, biochemical relapse-free survival (BRFS), metastatic progression-free survival (mPFS), and overall survival (OS). RESULTS: From 2012 to 2018, 178 patients were treated. Median baseline prostate-specific antigen (iPSA) was 6.37 ng/ml (range 1.78-20). Previous transurethral resection of the prostate (TURP) was present in 23 (12.9%) patients. Median follow-up was 58.9 months (range 9.7-89.9). BRFS rates at 1, 3, and 5 years were 98.3 (95% confidence interval, CI, 94.7-99.4%), 94.4 (95%CI 89.4-97), and 91.6% (95%CI 85.4-95.2), respectively. In univariate analysis, performance status (PS), iPSA, and nadir PSA (nPSA) were correlated with BRFS. In multivariable analysis iPSA and nPSA remained significant. BRFS rates at 5 years were 94.9% (95%CI 86.8-98) for International Society of Urological Pathology (ISUP) grade group 1, 93.2% (95%CI 80.5-97.7) for ISUP group 2, and 74.8% (95%CI 47.1-89.5) for ISUP group 3. At 1, 3, and 5 years, mPFS rates were 98.8 (95%CI 95.5-99.7), 96.2 (95%CI 91.9-98.3), and 92.9% (95%CI 87.2-96.2), respectively; OS rates were 100, 97.2 (95%CI 92.9-98.9), and 95.1% (95%CI 90-97.6), respectively. One (0.56%) case of grade 3 acute genitourinary (GU), one case of acute gastrointestinal (GI), and one case of grade 3 late GU toxicity were observed. GI toxicity positively correlated with prostate volume. CONCLUSION: At long-term follow-up, linac-based SBRT continues to be a valid option for the management localized PC. Biochemical control remains high at 5 years, albeit with some concerns regarding the optimal schedule for unfavorable intermediate-risk PC. Considering the excellent prognosis, patient selection is crucial for prevention of severe late toxicity.

Innovations in laboratory-based dynamic micro-CT to accelerate in situ research.

In the past few years, dynamic computed tomography (CT) approaches or uninterrupted acquisitions of deforming materials have rapidly emerged as an essential technique to understand material evolution, facilitating in situ investigations ranging from mechanical deformation to fluid flow in porous materials and beyond. Developments at synchrotron facilities have led this effort, pointing to the future of the technique. In the laboratory, recent developments at TESCAN XRE have made it possible to image, reconstruct and inspect dynamic processes in the laboratory with a temporal resolution below 10 s, meaning that an entire acquisition from 0 to 360° is completed within 10 s. The aim of this study is to explore the challenges and innovations that have led to the ability to perform high speed, dynamic acquisitions. A unique horizontally rotating gantry based micro-CT system was developed to facilitate complex in situ experiments. In doing so, the sample stays fixed while source and detector are uninterruptedly rotating around a vertical axis. In this work, the dynamic CT method with this rotating gantry based system will be described by two application examples: (1) deformation and collapse of a delicate beer foam and (2) in situ baking process of pastry. For the pastry baking process, an oven was needed to reach baking temperature. In a conventional micro-CT system, where the sample rotates, it is not so obvious to rotate an oven with sensor and heating cables. On the other hand, the delicate foam of a collapsing beer head is able to rotate, but because of the tangential convection during fast rotation (<10 s), it could influence the bubble detachment and liquid drainage and thus also the foam degradation. To investigate both processes, a horizontally rotating gantry based micro-CT is required. For both examples it was possible to quantify the key parameters such as pore size and distribution to better understand the rise and fall of porous foams. These examples will highlight the recent progress in adapting micro-CT workflows to accommodate uninterrupted imaging of dynamic events and point to opportunities for future continued development. LAY DESCRIPTION: Micro-CT allows the nondestructive visualisation of internal structures and is being used routinely in the field of Material Science, Geoscience, Life Science and more. Because of its nondestructive aspect, micro-CT is optimal to take repetitive scans of the same sample over time. The combination of taking different scans over time is so called time-resolved CT. By doing so, crucial insights can be obtained on how materials form, deform and perform over time or under certain external conditions. TESCAN XRE have made it possible to image, reconstruct and inspect dynamic processes in the laboratory with a temporal resolution below 10 s. The dynamic CT method will be described through the lens of two application examples: (1) deformation and collapse of a delicate beer foam and (2) in situ baking process of pastry. These examples will highlight the recent progress in adapting micro-CT workflows to accommodate imaging of dynamic events and point to opportunities for future continued development.

Comprehensive validation of halcyon 2.0 plans and the implementation of patient specific QA with multiple detector platforms.

PURPOSE: To perform a comprehensive validation of plans generated on a preconfigured Halcyon 2.0 with preloaded beam model, including evaluations of new features and implementing the patient specific quality assurance (PSQA) process with multiple detectors. METHODS: A total of 56 plans were generated in Eclipse V15.6 (Varian Medical System) with a preconfigured Halcyon treatment machine. Ten plans were developed via the AAPM TG-119 test suite with both IMRT and VMAT techniques. 34 clinically treated plans using C-arm LINAC from 24 patients were replanned on Halcyon using IMRT or VMAT techniques for a variety of sites including: brain, head and neck, lung, breast, abdomen, and pelvis. Six of those plans were breast VMAT plans utilizing the extended treatment field technique available with Halcyon 2.0. The dynamically flattened beam (DFB), another new feature on Halcyon 2.0, was also used for an AP/PA spine and four field box pelvis, as well as ten 3D breast plans. All 56 plans were measured with an ion chamber (IC), film, portal dosimetry (PD), ArcCHECK, and Delta4. Tolerance and action limits were calculated and compared to the recommendations of TG-218. RESULTS: TG-119 IC and film confidence limits met those set by the task group, except for IMRT target point dose. Forty-four of 46 clinical plans were within 3% for IC measurements. Average gamma passing rates with 3% dose difference and 2mm distance-to-agreement for IMRT/VMAT plans were: Film - 96.8%, PD - 99.9%, ArcCHECK - 99.1%, and Delta4 - 99.2%. Calculated action limits were: Film - 86.3%, PD - 98.4%, ArcCHECK - 96.1%, and Delta4 - 95.7%. Extended treatment field technique was fully validated and 3D plans with DFB had similar results to IMRT/VMAT plans. CONCLUSION: Halcyon plan deliveries were verified with multiple measurement devices. New features of Halcyon 2.0 were also validated. Traditional PSQA techniques and process specific tolerance and action limits were successfully implemented.

Development of a stereoscopic CT metal artifact management algorithm using gantry angle tilts for head and neck patients.

Dental amalgams are a common source of artifacts in head and neck (HN) images. Commercial artifact reduction techniques have been offered, but are substantially ineffectual at reducing artifacts from dental amalgams, can produce additional artifacts, provide inaccurate HU information, or require extensive computation time, and thus offer limited clinically utility. The goal of this work was to define and validate a novel algorithm and provide a phantom-based testing as proof of principle. An initial clinical comparison to a vendor's current solution was also performed. The algorithm uses two-angled CT scans in order to generate a single image set with minimal artifacts posterior to the metal implants. The algorithm was evaluated using a phantom simulating a HN patient with dental fillings. Baseline (no artifacts) geometrical measurements of the phantom were taken in the anterior-posterior, left-right, and superior-inferior directions and compared to the metal-corrected images using our algorithm to evaluate possible distortion from application of the algorithm. Mean HU numbers were also compared between the baseline scan and corrected image sets. A similar analysis was performed on the vendor's algorithm for comparison. The algorithm developed in this work successfully preserved the image geometry and HU and corrected the CT metal artifacts in the region posterior to the metal. The average total distortion for all gantry angles in the AP, LR, and SI directions was 0.17, 0.12, and 0.14 mm, respectively. The HU measurements showed significant consistency throughout the different reconstructed images when compared to the baseline image sets. The vendor's algorithm also showed no geometrical distortion but performed inferiorly in the HU number analysis compared to our technique. Our novel metal artifact management algorithm, using CT gantry angle tilts, provides a promising technique for clinical management of metal artifacts from dental amalgam.

[Effect of Gantry Speed on Image Quality of Four-dimensional Cone-beam Computed Tomography Using a Dynamic Phantom of Lung].

PURPOSE: The purpose of this paper was to determine the optimal imaging conditions for four-dimensional cone-beam computed tomography (4D-CBCT) using an X-ray tube and a flat-panel detector mounted on a radiotherapy device. METHODS: The optimal imaging conditions were examined by changing the gantry speed (GS) parameter that affected the exposure time. Exposed dose during imaging and image quality of moving phantom were compared between examined conditions. RESULTS: The weighted computed tomography dose index (CTDIW) decreased linearly with increasing GS. However, when GS was 180°/min or faster, the image quality degraded, and errors of 1 mm or more were observed regarding the size of mock tumor in the moving phantom. The accuracy of automatic image matching was within 0.1 mm when GS of 120°/min or slower was chosen. CONCLUSION: From the results of this study, we concluded that GS of 120°/min is the optimum imaging condition. Under this imaging condition, the exposure time and CTDIW can be reduced by about 50% without compromising the accuracy of image registration, compared to the conventional GS of 70°/min. In addition, it has been clarified that there is an event that image reconstruction is not performed correctly due to the influence of phantom artifacts without depending on GS.

Evaluation of gantry angle during respiratory-gated VMAT using triggered kilovoltage x-ray image.

Respiratory-gated volumetric modulated arc therapy (gated VMAT) involves further complexities to the dose delivery process because the gantry rotation must repeatedly stop and restart according to the gating signals. In previous studies, the gantry rotation performances were evaluated by the difference between the plan and the machine log. However, several reports pointed out that log analysis does not sufficiently replicate the machine performance. In this report, a measurement-based quality assurance of the relation between the gantry angle and gate-on or gate-off using triggered kilovoltage imaging and a cylinder phantom with 16 ball bearings is proposed. For the analysis, an in-house program that estimates and corrects the phantom offset was developed. The gantry angle in static and gated arc delivery was compared between the machine log and the proposed method. The gantry was set every 5 deg through its full motion range in static delivery, and rotated at three speeds (2, 4 and 6 deg s-1 ) with different gating intervals (1.5 or 3.0 s) in gated arc delivery. The mean and standard deviation of the angular differences between the log and the proposed method was -0.05 deg ± 0.12 deg in static delivery. The mean of the angular difference was within ±0.10 deg and the largest difference was 0.41 deg in gated arc delivery. The log records the output of the encoder so that miscalibration and mechanical sagging will be disregarded. However, the proposed method will help the users to detect the mechanical issues due to the repeated gantry stops and restarts in gated VMAT.

Inverse Finite Element Method for Reconstruction of Deformation in the Gantry Structure of Heavy-Duty Machine Tool Using FBG Sensors.

The deformation of the gantry structure in heavy-duty machine tools is an important factor that affects machining accuracy. In order to realize real-time monitoring of the deformation of the gantry structure, which is statically indeterminate and complex in shape, the reconstruction algorithm based on inverse Finite Element Method (iFEM) is proposed and fiber Bragg grating (FBG) sensors are used to measure strain data. The elements of the gantry structure are divided and the displacement functions of each element are determined. The shape function is obtained by substituting degree of freedoms (DOF) of element nodes into displacement functions. Through a differential method, the relation between strain and DOF of element nodes is established by the strain matrices. Subsequently, the DOF of element nodes are obtained by minimizing an error functional defined as the least-squares error between the analytic strain data and the corresponding experimental strains. Considering coordinate transformation and problem-specific displacement boundary conditions, the total deformation of the gantry structure is obtained. Following this, the experiment was carried out. The deformation simulated by ANSYS was used to replace the experimentally measured deformation and then compared with the deformation reconstructed by iFEM under the same loading condition. The accuracy of iFEM for reconstructing deformation of the gantry structure in heavy-duty machine tools is verified. It provides a new view for improving the machining precision of heavy-duty machine tools.

A novel and independent method for time-resolved gantry angle quality assurance for VMAT.

Volumetric-modulated arc therapy (VMAT) treatment delivery requires three key dynamic components; gantry rotation, dose rate modulation, and multi-leaf collimator motion, which are all simultaneously varied during the delivery. Misalignment of the gantry angle can potentially affect clinical outcome due to the steep dose gradients and complex MLC shapes involved. It is essential to develop independent gantry angle quality assurance (QA) appropriate to VMAT that can be performed simultaneously with other key VMAT QA testing. In this work, a simple and inexpensive fully independent gantry angle measurement methodology was developed that allows quantitation of the gantry angle accuracy as a function of time. This method is based on the analysis of video footage of a "Double dot" pattern attached to the front cover of the linear accelerator that consists of red and green circles printed on A4 paper sheet. A standard mobile phone is placed on the couch to record the video footage during gantry rotation. The video file is subsequently analyzed and used to determine the gantry angle from each video frame using the relative position of the two dots. There were two types of validation tests performed including the static mode with manual gantry angle rotation and dynamic mode with three complex test plans. The accuracy was 0.26° ± 0.04° and 0.46° ± 0.31° (mean ± 1 SD) for the static and dynamic modes, respectively. This method is user friendly, cost effective, easy to setup, has high temporal resolution, and can be combined with existing time-resolved method for QA of MLC and dose rate to form a comprehensive set of procedures for time-resolved QA of VMAT delivery system.

CT chest and gantry rotation time: does the rotation time influence image quality?

BACKGROUND: Computed tomography (CT) gantry rotation time is one factor influencing image quality. Until now, there has been no report investigating the influence of gantry rotation time on chest CT image quality. PURPOSE: To investigate the influence of faster gantry rotation time on image quality and subjective and objective image parameters in chest CT imaging. MATERIAL AND METHODS: Chest CT scans from 160 patients were examined in this study. All scans were performed using a single-source mode (collimation, 128 × 0.6 mm; pitch, 1.2) on a dual-source CT scanner. Only gantry rotation time was modified, while other CT parameters were kept stable for each scan (120 kV/110 reference mAs). Patients were divided into four groups based on rotation time: group 1, 1 s/ rotation (rot); group 2, 0.5 s/rot; group 3, 0.33 s/rot; group 4, 0.28 s/rot. Two blinded radiologists subjectively compared CT image quality, noise, and artifacts, as well as radiation exposure, from all groups. For objective comparison, all image datasets were analyzed by a radiologist with 5 years of experience concerning objective measurements as well as signal-to-noise ratio (SNR). RESULTS: We found that faster gantry rotation times (0.28 s/rot and 0.33 s/rot) resulted in more streak artifacts, image noise, and decreased image quality. However, there was no significant difference in radiation exposure between faster and slower rotation times (P > 0.7). CONCLUSION: Faster CT gantry rotation reduces scan time and motion artifacts. However, accelerating rotation time increases image noise and streak artifacts. Therefore, a slower CT gantry rotation speed is still recommended for higher image quality in some cases.

Development of a standalone delivery sequence model for proton arc therapy.

BACKGROUND: Spot-scanning proton arc (SPArc) has been drawing significant interests in recent years because of its capability of continuous proton irradiation during the gantry rotation. Previous studies demonstrated SPArc plans were delivered on a prototype of the DynamicARC solution, IBA ProteusONE. PURPOSE: We built a novel delivery sequence model through an independent experimental approach: the first SPArc delivery sequence model (DSMSPArc). Based on the model, we investigated SPArc treatment efficiency improvement in the routine proton clinical operation. METHODS: SPArc test plans were generated and delivered on a prototype of the DynamicARC solution, IBA ProteusONE. An independent gantry inclinometer and the machine logfiles were used to derive the DSMSPArc. Seventeen SPArc plans were used to validate the model's accuracy independently. Two random clinical operation dates (6th January and 22nd March, 2021) from a single-room proton therapy center (PTC) were selected to quantitatively assess the improvement of treatment efficiency compared to the IMPT. RESULTS: The difference between the logfile and DSMSPArc is about 3.2 ± 4.8%. SPArc reduced 58.1% of the average treatment delivery time per patient compared to IMPT (p < 0.01). Daily treatment throughput could be increased by 30% using SPArc using a single-room proton therapy system. CONCLUSIONS: The first model of dynamic arc therapy is established in this study through an independent experimental approach using logfiles and measurements which allows clinical users and investigators to simulate the dynamic treatment delivery and assess the daily treatment throughput improvement.

MRI-guided in-bore biopsy of the prostate - defining the optimal number of cores needed.

BACKGROUND: Numerous studies have shown that magnetic resonance imaging (MRI)-targeted biopsy approaches are superior to traditional systematic transrectal ultrasound guided biopsy (TRUS-Bx). The optimal number of biopsy cores to be obtained per lesion identified on multiparametric MRI (mpMRI) images, however, remains a matter of debate. The aim of this study was to evaluate the incremental value of additional biopsy cores in an MRI-targeted "in-bore"-biopsy (MRI-Bx) setting. PATIENTS AND METHODS: Two hundred and forty-five patients, who underwent MRI-Bx between June 2014 and September 2021, were included in this retrospective single-center analysis. All lesions were biopsied with at least five biopsy cores and cumulative detection rates for any cancer (PCa) as well as detection rates of clinically significant cancers (csPCa) were calculated for each sequentially labeled biopsy core. The cumulative per-core detection rates are presented as whole numbers and as proportion of the maximum detection rate reached, when all biopsy cores were considered. CsPCa was defined as Gleason Score (GS) ≥ 7 (3 + 4). RESULTS: One hundred and thirty-two of 245 Patients (53.9%) were diagnosed with prostate cancer and csPCa was found in 64 (26.1%) patients. The first biopsy core revealed csPCa/ PCa in 76.6% (49/64)/ 81.8% (108/132) of cases. The second, third and fourth core found csPCa/ PCa not detected by previous cores in 10.9% (7/64)/ 8.3% (11/132), 7.8% (5/64)/ 5.3% (7/132) and 3.1% (2/64)/ 3% (4/132) of cases, respectively. Obtaining one or more cores beyond the fourth biopsy core resulted in an increase in detection rate of 1.6% (1/64)/ 1.5% (2/132). CONCLUSION: We found that obtaining five cores per lesion maximized detection rates. If, however, future research should establish a clear link between the incidence of serious complications and the number of biopsy cores obtained, a three-core biopsy might suffice as our results suggest that about 95% of all csPCa are detected by the first three cores.