Biocompatible PHB Production from Bacillus Species Under Submerged and Solid-State Fermentation and Extraction Through Different Downstream Processing.

Catastrophic global accumulation of non-biodegradable plastic has led to efforts for production of alternative eco-friendly biopolymer. Here, we attempted to produce a biodegradable, cytocompatible and eco-friendly polyhydroxy-butyrate (PHB) from a pigmented Bacillus sp. C1 (2013) (KF626477) through submerged (SmF) and solid-state fermentation (SSF). Under SmF and SSF, 0.60 g l-1 and 1.56 g l-1 of PHB with 0.497 g l-1 of yellow fluorescent pigment (YFP) was produced. Fourier transform infrared (FTIR) absorption bands at 1719-1720 cm-1 indicate the presence of C=O group of PHB. Nuclear magnetic resonance (NMR) exhibited the typical chemical shift patterns of PHB, and crystallinity was confirmed from X-ray diffraction (XRD). The melting temperature (Tm), degradation temperature (Td) and crystallinity (Xc) of extracted PHB were found to be 171 °C, 288 °C and 35%, respectively. FACS (Fluorescence-activated cell sorting) confirmed cytocompatibility of PHB at 400 µg ml-1 in mouse fibroblast line. Moreover, biodegradability and elevated cytocompatibility of the PHB produced through SSF make them highly potential biomaterials to be used as a drug delivery carrier in future.

A Preliminary Study on Metabolome Profiles of Buffalo Milk and Corresponding Mozzarella Cheese: Safeguarding the Authenticity and Traceability of Protected Status Buffalo Dairy Products.

The aim of this study is to combine advanced GC-MS and metabolite identification in a robust and repeatable technology platform to characterize the metabolome of buffalo milk and mozzarella cheese. The study utilized eleven dairies located in a protected designation of origin (PDO) region and nine dairies located in non-PDO region in Italy. Samples of raw milk (100 mL) and mozzarella cheese (100 g) were obtained from each dairy. A total of 185 metabolites were consistently detected in both milk and mozzarella cheese. The PLS-DA score plots clearly differentiated PDO and non-PDO milk and mozzarella samples. For milk samples, it was possible to divide metabolites into two classes according to region: those with lower concentrations in PDO samples (galactopyranoside, hydroxybuthyric acid, allose, citric acid) and those with lower concentrations in non-PDO samples (talopyranose, pantothenic acid, mannobiose, etc.,). The same was observed for mozzarella samples with the proportion of some metabolites (talopyranose, 2, 3-dihydroxypropyl icosanoate, etc.,) higher in PDO samples while others (tagatose, lactic acid dimer, ribitol, etc.,) higher in non-PDO samples. The findings establish the utility of GC-MS together with mass spectral libraries as a powerful technology platform to determine the authenticity, and create market protection, for "Mozzarella di Bufala Campana."

Harzianoic acids A and B, new natural scaffolds with inhibitory effects against hepatitis C virus.

Two new sesquiterpene-based analogues, namely harzianoic acids A (1) and B (2), were isolated from a sponge-associated fungus Trichoderma harzianum. Their structures were determined on the basis of the extensive spectroscopic analyses in association with the ECD data for the configurational assignment. Harzianoic acids A and B were structurally characterized as a sesquiterpene and a norsesquiterpene with a cyclobutane nucleus, which is uncommonly found from nature. Both compounds exhibited the inhibitory activity to reduce the HCV RNA levels with low cytotoxicity. The preliminary investigation of the mode of action revealed that the compounds blocked the entry step in the HCV life cycle, while the viral E1/E2 and the host cell CD81 were the potential target proteins.

Ultra-High-Performance Liquid Chromatography Tandem Mass Spectrometry Assay for Determination of Endogenous GHB and GHB-Glucuronide in Nails.

Background: The short chain fatty acid gamma-hydroxybutyric acid (GHB) is a precursor, and the metabolite of gamma-aminobutyric acid is commonly used as an illegal recreational drug of abuse. Methods: An ultra-high-performance liquid chromatography tandem mass spectrometry was developed and validated for endogenous GHB and its glucuronide in nails, to complement hair in forensic contexts for a retrospective detection of psychotropic drugs consumption. Results: GHB endogenous values for children and adolescents, adult females, and adult males in fingernails ranged from 0.3 to 3.0, 3.2, and 3.8 ng/mg, respectively, and toenails values ranged from 0.3 to 1.8, 2.0, and 2.4 ng/mg, respectively. In the three different groups, values of GHB in fingernails were statistically higher than those in toenails. GHB glucuronide could only be detected in finger nails with values ranging from 0.08 to 0.233, 0.252 and 0.243 in children and adolescents, adult females and adult males, respectively. Conclusions: The validated method was efficaciously applied to real finger and toe nails specimens from a population of males and females non GHB consumers. A preliminary cut-off of 5.0 ng/mg nail for endogenous GHB and 0.5 ng/mg for endogenous GHB-Gluc in the general population was proposed.

Improving metabolite production in microbial co-cultures using a spatially constrained hydrogel.

Microbial co-cultures promise the development of more efficient bioproductions. However, the design of obligate mutualisms is complicated when using organisms that possess differing growth rates or incompatible media requirements. In this work, we investigate sucrose production by cscB Synechococcus elongatus PCC 7942 within a polyacrylate hydrogel matrix. This system secretes sucrose only when the hydrogel is spatially constrained, demonstrating a new utilization of hydrogel swelling pressure to control the osmotic strength of a microbial microenvironment. The sucrose produced via the constrained microbial hydrogel is used to grow the diazotrophic organism, Azotobacter vinelandii, in a mutually dependent fashion. The growth of this hydrogel-based coculture has several advantages over batch cultures, including better growth over a longer period of time and decreased salt stress on A. vinelandii. Biotechnol. Bioeng. 2017;114: 1195-1200. © 2016 Wiley Periodicals, Inc.

Systematic engineering of TCA cycle for optimal production of a four-carbon platform chemical 4-hydroxybutyric acid in Escherichia coli.

To address climate change and environmental problems, it is becoming increasingly important to establish biorefineries for the production of chemicals from renewable non-food biomass. Here we report the development of Escherichia coli strains capable of overproducing a four-carbon platform chemical 4-hybroxybutyric acid (4-HB). Because 4-HB production is significantly affected by aeration level, genome-scale metabolic model-based engineering strategies were designed under aerobic and microaerobic conditions with emphasis on oxidative/reductive TCA branches and glyoxylate shunt. Several different metabolic engineering strategies were employed to develop strains suitable for fermentation both under aerobic and microaerobic conditions. It was found that microaerobic condition was more efficient than aerobic condition in achieving higher titer and productivity of 4-HB. The final engineered strain produced 103.4g/L of 4-HB by microaerobic fed-batch fermentation using glycerol. The aeration-dependent optimization strategy of TCA cycle will be useful for developing microbial strains producing other reduced derivative chemicals of TCA cycle intermediates.

CRISPRi engineering E. coli for morphology diversification.

Microbial morphology engineering has recently become interesting for biotechnology. Genes ftsZ and mreB encoding proteins of bacterial fission ring and skeletons, respectively, are essential for cell growth, they both are the most important genes keeping the bacterial shapes including the cell length and width, respectively. Clustered regularly interspaced short palindromic repeats interference, abbreviated as CRISPRi, was for the first time used in this study to regulate expression intensities of ftsZ or/and mreB in E. coli. Five sgRNAs associated with CRISPRi were designed and synthesized, respectively, to target five various locations on genes ftsZ or mreB encoded in the E. coli chromosome, resulting in various reduced expression levels of ftsZ or/and mreB, respectively, forming elongated or/and fatter cells. Repressions on gene expressions of ftsZ or/and mreB could be further intensified by combining various sgRNAs together. It was found that the stronger the repression on genes ftsZ or/and mreB, the longer the E. coli fibers, and the larger the E. coli cells. Combined repressions on expressions of ftsZ and mreB generated long and larger E. coli with diverse morphologies including various sizes of gourds, bars, coccus, spindles, multi-angles and ellipsoids. In all cases, accumulations of intracellular biopolyester polyhydroxybutyrate (PHB) were in direct proportional to the intracellular volumes, ranging from 40% to 80% PHB in bacterial cell dry weights, depending on the cell volumes increases by the above CRISPRi applications.

Calorespirometric feeding control enhances bioproduction from toxic feedstocks-Demonstration for biopolymer production out of methanol.

The sustainable production of fuels and industrial bulk chemicals by microorganisms in biotechnological processes is promising but still facing various challenges. In particular, toxic substrates require an efficient process control strategy. Methanol, as an example, has the potential to become a major future feedstock due to its availability from fossil and renewable resources. However, besides being toxic, methanol is highly volatile. To optimize its dosage during microbial cultivations, an innovative, predictive process control strategy based on calorespirometry, i.e., simultaneous measurements of heat and CO2 emission rates, was developed. This rarely used technique allows an online-estimation of growth parameters such as the specific growth rate and substrate consumption rate as well as a detection of shifts in microbial metabolism thus enabling an adapted feeding for different phases of growth. The calorespirometric control strategy is demonstrated exemplarily for growth of the methylotrophic bacterium Methylobacterium extorquens on methanol and compared to alternative control strategies. Applying the new approach, the methanol concentration could be maintained far below a critical limit, while increased growth rates of M. extorquens and higher final contents of the biopolymer polyhydroxybutyrate were obtained. Biotechnol. Bioeng. 2016;113: 2113-2121. © 2016 Wiley Periodicals, Inc.

A simple recovery process for biodegradable plastics accumulated in cyanobacteria treated with ionic liquids.

Here, we proposed a simple recovery process for poly(3-hydroxybutyrate) (PHB) accumulated in cyanobacteria by using ionic liquids (ILs), which dissolve cyanobacteria but not PHB. First, we investigated the effects of IL polarity on hydrogen-bonding receipt ability (ß value) and hydrogen-bonding donating ability (α value) and evaluated the subsequent dissolution of cyanobacteria. We found that ILs having α values higher than approximately 0.4 and ß values of approximately 0.9 were suitable for dissolution of cyanobacteria. In particular, 1-ethyl-3-methylimidazolium methylphosphonate ([C2mim][MeO(H)PO2]) was found to dissolve cyanobacteria components, but not PHB. Thus, we verified that PHB produced in cyanobacteria could be separated and recovered by simple filtering after dissolution of cyanobacteria in [C2mim][MeO(H)PO2]. Using this technique, more than 98 % of PHB was obtained on the filter as residues separated from cyanobacteria. Furthermore, [C2mim][MeO(H)PO2] maintained the ability to dissolve cyanobacteria after a simple recycling procedure.

Effectiveness of xylose utilization for high yield production of lactate-enriched P(lactate-co-3-hydroxybutyrate) using a lactate-overproducing strain of Escherichia coli and an evolved lactate-polymerizing enzyme.

Xylose, which is a major constituent of lignocellulosic biomass, was utilized for the production of poly(lactate-co-3-hydroxybutyrate) [P(LA-co-3HB)], having transparent and flexible properties. The recombinant Escherichia coli JW0885 (pflA(-)) expressing LA-polymerizing enzyme (LPE) and monomer supplying enzymes grown on xylose produced a copolymer having a higher LA fraction (34mol%) than that grown on glucose (26mol%). This benefit of xylose was further enhanced by combining it with an evolved LPE (ST/FS/QK), achieving a copolymer production having 60mol% LA from xylose, while glucose gave a 47mol% LA under the same condition. The overall carbon yields from the sugars to the polymer were similar for xylose and glucose, but the ratio of the LA and 3HB units in the copolymer was different. Notably, the P(LA-co-3HB) yield from xylose (7.3gl(-1)) was remarkably higher than that of P(3HB) (4.1gl(-1)), indicating P(LA-co-3HB) as a potent target for xylose utilization.

High production of poly(3-hydroxybutyrate) from a wild Bacillus megaterium Bolivian strain.

AIM: Taking into account that a novel strain of Bacillus megaterium was isolated from Uyuni salt lake (Bolivia) in a previous work, the objectives of this new study were to determine the maximal Poly-3-hydroxybutyrate production potential of B. megaterium strain uyuni S29 in an industrial conventional media, the possibility that the strain accumulates different types of polyhydroxyalkanoates, the cellular morphology during the biosynthesis process and the characterization of the produced biopolymers. METHODS AND RESULTS: The micro-organism was first tested in a 3-L bioreactor obtaining a high specific growth rate of 1·64 h(-1). A second fed-batch experiment was carried out in shaking flasks, reaching up to 70% PHB of cell dry mass. The biosynthesized polymers were extracted by two different extraction procedures and characterized. The results showed that all of them were PHB with thermal properties different to the conventional PHB. The micrographs taken by TEM show the different cell morphology during the fermentation process. CONCLUSIONS: In this previous study, the strain not only grew properly in the industrial conditions proposed without spore formation, but also produced and accumulated a large content of PHB, never reached before for its genus. Therefore, if the culture conditions can be optimized, the biopolymer production could be increased. SIGNIFICANCE AND IMPACT OF THE STUDY: The impact of the study has related to the area of the biomaterials and their production. The study provides new data related to the high production of PHB from the wild novel strain B. megaterium uyuni S29, the highest polymer accumulation for the genus Bacillus without spores formation.

Novel GHB-derived natural products from European mistletoe (Viscum album).

CONTEXT: The European white-berry mistletoe [Viscum album L. (Loranthaceae)] is among the oldest known medicinal plants. At present the most important application of mistletoe extracts is in the treatment of cancer. However, natural products specific to mistletoe have rarely been encountered in the current literature. OBJECTIVE: To discover novel natural products specific to European mistletoe. MATERIALS AND METHODS: European mistletoe was extracted with methanol, purified to partition against diethyl ether and further purified with XAD-7 column chromatography. Pure compounds were separated by Sephadex column chromatography and preparative HPLC. The structures of the novel compounds were established using a combination of several 2D NMR spectroscopic techniques and mass spectrometry. RESULTS: A new type of natural product derived from the methyl ester of γ-hydroxybutyric acid (GHB) coupled to hydroxybenzoic acids, namely 3-(3'-carbomethoxypropyl) gallic acid and 3-(3'-carbomethoxypropyl)-7→3″-protocatechoyl galloate were characterized from European white-berry mistletoe. Condensation of the 3-hydroxyl of gallic acid with the 4-hydroxyl of GHB significantly reduced the radical scavenging properties of the former compound. DISCUSSION AND CONCLUSION: The characterized compounds define a novel group of natural products that may be of particular interest because it appears that the two new compounds are not closely related to any known natural product.

Production and characterization of biodegradable polyhydroxybutyrate by Micrococcus luteus isolated from marine environment.

Marine microorganisms are reported to produce polyhydroxybutyrate (PHB) that has wide range of medical and industrial applications with the advantage of biodegradability. PHBs are synthesized as an energy and carbon storage element under metabolic pressure. The scope of this work is enhancing PHB production using marine microbial isolate, Micrococcus luteus by selectively optimizing various growth conditions such as different media components and growth parameters that influence the cell growth and PHB production were sampled. Micrococcus luteus produced 7.54 g/L of PHB utilizing glucose as a carbon source and ammonium sulphate as a nitrogen source with maximum efficiency. The same optimized operational conditions were further employed in batch fermentation over a time span of 72 h. Interestingly higher cell dry weight of 21.52 g/L with PHB yield of 12.18 g/L and 56.59% polymer content was observed in batch fermentation studies at 64 h. The chemical nature of the extracted polymer was validated with physio-chemical experiments and was at par with the commercially available PHB. This study will spotlight M. luteus as a potential source for large-scale industrial production of PHB with reducing environmental pollutions.

Production of eco-friendly PHB-based bioplastics by Pseudomonas aeruginosa CWS2020 isolate using poultry (chicken feather) waste.

Nowadays, the accumulation of non-degradable plastics and other disposed wastes leads to environmental pollution across the world. The production of eco-friendly and cost-effective poly-ß-hydroxybutyrate (PHB) could be a better alternative to conventional petroleum-based plastics and prevent environmental pollution. Besides, the area in and around Namakkal, Tamil Nadu, India is well known for poultries, currently facing the number of environmental issues due to the accumulation of chicken feather waste. This study focused on the production of eco-friendly PHB by recycling poultry (chicken feather) waste as the substrate. The native PHB producers were screened from the chicken waste disposal site in Namakkal by Sudan black B staining method. Further, the potent bacterial isolate was identified as Pseudomonas aeruginosa (NCBI accession MF18889) by phenotypic and genotypic characteristics. The PHB production media with chicken feather waste was statistically optimized by response surface methodology. The dry weight of PHB produced under optimized condition (15.96 g/L chicken feather waste, 37 °C temperature, 19.8 g/L glucose and 6.85 pH) was found to be 4.8 g/L. Besides, PHB was characterized and confirmed by thin-layer chromatography, Fourier-transform infrared spectroscopy and Gas chromatography-mass spectrometry analysis. Thus, this study concludes that poultry waste could be a complex nitrogen source for improving the growth of PHB producers and substantially increasing the yield of PHB, and it will be an eco-friendly and low-cost production in bioprocess technology.

Production and characterization of PHB from two novel strains of Bacillus spp. isolated from soil and activated sludge.

The present study reports two bacteria, designated 87I and 112A, which were isolated from soil and activated sludge samples from Hyderabad, India, and that are capable of producing poly-3-hydroxybutyrate (PHB). Based on phenotypical features and genotypic investigations, these microorganisms were identified as Bacillus spp. Their optimal growth occurred between 28 degrees C and 30 degrees C and pH 7. Bacillus sp. 87I yielded a maximum of 70.04% dry cell weight (DCW) PHB in medium containing glucose as carbon source, followed by 55.5% DCW PHB in lactose-containing medium, whereas Bacillus sp. 112A produced a maximum of 67.73% PHB from glucose, 58.5% PHB from sucrose, followed by 50.5% PHB from starch as carbon substrates. The viscosity average molecular mass (M (v)) of the polymers from Bacillus sp. 87I was 513 kDa and from Bacillus sp. 112A was 521 kDa. All the properties of the biopolymers produced by the two strains 87I and 112A were characterized.

Harzianic acid, an antifungal and plant growth promoting metabolite from Trichoderma harzianum.

A Trichoderma harzianum strain, isolated from composted hardwood bark in Western Australia, was found to produce a metabolite with antifungal and plant growth promoting activity. The structure and absolute configuration of the fungal compound, harzianic acid (1), were determined by X-ray diffraction studies. Harzianic acid showed antibiotic activity against Pythium irregulare, Sclerotinia sclerotiorum, and Rhizoctonia solani. A plant growth promotion effect was observed at low concentrations of 1.

Six new monacolin analogs from red yeast rice.

Six novel monacolin analogs, monacolins V1-V6 (1-6), together with seven known ones (7-13), were isolated from the ethyl acetate extract of red yeast rice. Their structures and absolute configurations were determined by spectroscopic methods, especially 2D NMR (1H-1HCOSY, HSQC, HMBC, and NOESY/ROESY) and CD spectroscopic analyses as well as chemical derivation. Monacolins V2 (2) and V3 (3) represent the first examples of monacolins with 3-hydroxybutyrate substitute. The anti-inflammatory inhibitory activities against the lipopolysaccharide (LPS) induced NO production in BV-2 cells as well as antioxidant activities against rat liver microsomal lipid peroxidation were evaluated.

Characterization of short-chain poly3-hydroxybutyrate in baker's yeast.

A short-chain poly3-hydroxybutyrate including four comonomers, originating from a complex with calcium polyphosphate, was isolated from commercial baker's yeast cells (Saccharomyces cerevisiae) and characterized as the second complexed poly(3-hydroxyalkanoate) (cPHA) in eukaryotes. The number-average molecular weight of 4982.5 Da with a polydispersity index of 1.11 was much lower than that of beet cPHA previously isolated. End-group analysis suggested that at least 60% of the molecules form the cyclic structures. Here, the organism-dependent structural diversity of cPHAs was completely established. It was also found that a change of culture medium influences the molecular weight but not the polydispersity of baker's yeast cPHA.

Production of Poly(3-hydroxybutyrate) from waste potato starch.

There has been a considerable interest in using low cost carbon substrates for the production of Poly(3-hydroxybutyrate) (PHB). We have shown that saccharified waste potato starch can be used as a viable alternative carbon source in high cell density PHB production. Using Ralstonia eutropha NCIMB 11599 with phosphate limitation, 179 g/l biomass, 94 g/l PHB, Y(biomass/starch) = 0.46 g/g, Y(PHB/starch) = 0.22 g/g, and PHB productivity = 1.47 g/(l*h) were achieved. Residual maltose accumulated in the fed-batch reactor but caused no noticeable inhibition. Performance with saccharified starch was virtually identical to that with glucose.