RESUMO
OBJECTIVE: By studying the process of reverse osmosis system for traditional Chinese medicine materials physicochemical parameters affecting the osmotic pressure of its relevance, new compound system reverse osmosis process design methods were explored. METHOD: Three concentrations materials for high, middle and low were dubbed with Sini decoction as a model drug, and pretreated by 50 thousand relative molecular weight cut-off ultrafiltration membrane. The viscosity, turbidity, conductivity, salinity, TDS, pH value and osmotic pressure of each sample were determined after the reverse osmosis to study the physical and chemical parameters between their respective correlations with the osmotic pressure, and characterized by HPLC chromatograms showing changes before and after the main chemical composition of samples of reverse osmosis. RESULT: Conductivity-osmotic pressure, salinity-osmotic pressure of the linear correlation coefficient, TDS-osmotic pressure between the three sets of parameters were 0.963 8, 0.932 7, 0.973 7, respectively. Reverse osmosis concentrate and its characteristic spectrum ultrafiltrate HPLC similarity were up to 0. 968 or more, except the low concentrations. CONCLUSION: There is a significant correlation between the three physicochemical parameters (conductivity, salinity, TDS) and osmotic pressure of each sample system, and there is also significant linear correlation between salinity, conductivity, TDS. The original chemical composition of Sini decoction material concentrate was completely remained after the process of reverse osmosis.
Assuntos
Química Farmacêutica/métodos , Medicamentos de Ervas Chinesas/química , Fenômenos Químicos , Cromatografia Líquida de Alta Pressão , Peso Molecular , Pressão Osmótica , Propriedades de Superfície , ViscosidadeRESUMO
A novel and interesting controllable spirocyclization of unsaturated barbiturates with enamino esters for the assembly of cyclopentenyl and pyrrolinyl spirobarbiturates has been developed under ball-milling conditions. The present protocol features high chemoselectivity and efficiency, excellent functional group tolerance and mild reaction conditions.
RESUMO
Rapid advancements in carbon-based fillers have enabled a new and more promising platform in the development of electromagnetic attenuation composites. Alignment of fillers in composites with specific structures and morphologies has been widely pursued to achieve high performance based on taking advantage of unique filler characteristics. In this work, few-layer graphene (FLG), obtained from direct exfoliation of graphite, was fabricated into paraffin wax to prepare FLG/wax composites and investigate their electromagnetic interference (EMI) shielding performance. The as-exfoliated FLG/wax samples have shown much improved EMI performance compared to the commercial graphite/wax ones. For further improvement of EMI shielding performance, split-press-merge approaches were applied to align the FLG fillers to achieve anisotropic characteristics in the plane perpendicular to the pressing direction. Much enhanced EMI shielding performance coupled with an improvement in absorption and reflection was observed in the post-alignment FLG/wax composites. An average interparticle distance model associated with improved electrically conducting interconnection and enlarged effective reflection regions with respect to enhanced reflection efficiency were discussed. The results suggest a platform and promising opportunities for preparing high-performance EMI shielding composites.
RESUMO
OBJECTIVE: To compare the morphological and compositional characteristics of carotid plaques in two cohorts (2002-2005 and 2012-2015) of Chinese patients using magnetic resonance vessel wall imaging. METHODS: Symptomatic patients with carotid atherosclerotic plaques who underwent carotid vessel wall magnetic resonance imaging between 2002-2005 and 2012-2015 were retrospectively recruited. Plaque morphology [including mean wall area, wall thickness, and maximum normalized wall index (NWI)] and composition [including calcification, intraplaque hemorrhage, and lipid-rich necrotic core (LRNC)] in symptomatic carotid arteries were evaluated and compared between patients in these two time periods. RESULTS: A total of 258 patients, including 129 patients in the 2002-2005 cohort and 129 patients in the 2012-2015 cohort, were recruited. Statin use (49.6%vs. 32.6%, P = 0.004) and hypertension (76.0% vs. 62.8%, P = 0.015) were significantly more common in the 2012-2015 cohort than in the 2002-2005 cohort. Patients in the 2012-2015 cohort also exhibited significantly low plaque burden parameters (allP < 0.05), as well as a lower prevalence (68.2% vs. 89.9%, P < 0.001) and volume percentages of LRNC (11.2% ± 14.2% vs. 25.7% ± 17.7%, P < 0.001). These differences remained significant after adjustment for clinical factors. The differences in the volume percentages of LRNC also remained significant after an additional adjustment for maximum NWI ( P < 0.001). CONCLUSIONS: Patients in the 2012-2015 cohort had a lower plaque burden and volume percentages of LRNC in symptomatic carotid arteries than those in the 2002-2005 cohort. These findings indicate that carotid plaques in the recent cohort had a lower severity and vulnerability.
RESUMO
Iminodiacetic acid (IDA) is widely used as an intermediate in the manufacturing of chelating agents, glyphosate herbicides and surfactants. To improve activity and tolerance to the substrate for IDA production, Acidovorax facilis nitrilase was selected for further modification by the gene site saturation mutagenesis method. After screened by a two-step screening method, the best mutant (Mut-F168V/T201N/S192F/M191T/F192S) was selected. Compared to the wild-type nitrilase, Mut-F168V/T201N/S192F/M191T/F192S showed 136% improvement in specific activity. Co2+ stimulated nitrilase activity, whereas Cu2+, Zn2+ and Tween 80 showed a strong inhibitory effect. The Vmax and kcat of Mut-F168V/T201N/S192F/M191T/F192S were enhanced 1.23 and 1.23-fold, while the Km was decreased 1.53-fold. The yield of Mut-F168V/T201N/S192F/M191T/F192S with 453.2â¯mM of IDA reached 71.9% in 5â¯h when 630â¯mM iminodiacetonitrile was used as substrate. This study indicated that mutant nitrilase obtained in this study is promising in applications for the upscale production of IDAN.
Assuntos
Substituição de Aminoácidos , Aminoidrolases , Proteínas de Bactérias , Comamonadaceae , Mutagênese Sítio-Dirigida , Aminoidrolases/química , Aminoidrolases/genética , Proteínas de Bactérias/química , Proteínas de Bactérias/genética , Comamonadaceae/enzimologia , Comamonadaceae/genética , Proteínas Recombinantes/químicaRESUMO
OBJECTIVE: To investigate the difference in the vulnerability of carotid atherosclerotic plaques in patients with unilateral and bilateral intraplaque hemorrhage (IPH). METHODS: A retrospective analysis was conducted among 44 patients with unilateral IPH (30 cases) or bilateral IPH (14 cases) in the carotid plaques detected by magnetic resonance imaging (MRI) in our hospital between December, 2009 and December, 2012. The age, maximum wall thickness and incidence of fibrous cap rupture were compared between the two groups. RESULTS: Compared with those with unilateral IPH, the patients with bilateral IPHs had a significantly younger age (66.6∓9.4 years vs 73.7∓9.0 years, P=0.027), a significantly greater maximum plaque thickness (6.3∓1.9 mm vs 5.0∓1.3 mm, P=0.035) and a higher incidence of ulcers (50% vs 13.3%, P=0.025). Logistic regression analysis revealed a significant association between bilateral IPHs and the occurrence of ulcer with an odd ratio (OR) of 6.5 (95% confidence interval [CI]: 1.5-28.7, P=0.014). After adjustment for gender in Model 1, bilateral IPHs were still significantly associated with presence of ulcer (OR=5.7, 95%CI: 1.1-29.2, P=0.036). But after adjustment for age (P=0.131) or maximum plaque thickness (P=0.139) in model 2, no significant correlation was found between bilateral IPHs and the presence of ulcer. CONCLUSION: Compared with patients with unilateral IPH, those with bilateral IPHs are at a younger age and have a greater plaque burden and a higher incidence of fibrous cap rupture, suggesting a greater vulnerability of the carotid plaques in patients with bilateral IPHs.
Assuntos
Artérias Carótidas/diagnóstico por imagem , Hemorragia/diagnóstico por imagem , Imageamento por Ressonância Magnética , Placa Aterosclerótica/diagnóstico por imagem , Idoso , Estenose das Carótidas/diagnóstico por imagem , Estenose das Carótidas/fisiopatologia , Fibrose , Humanos , Pessoa de Meia-Idade , Razão de Chances , Estudos RetrospectivosRESUMO
In this study, few-layered MoS2 nanosheets (MoS2-NS) were obtained via the top-down exfoliation method from bulk MoS2 (MoS2-Bulk), and the dielectric properties and microwave absorption performance of MoS2-NS were first reported. The dimension-dependent dielectric properties and microwave absorption performance of MoS2 were investigated by presenting a comparative study between MoS2-NS and MoS2-Bulk. Our results show that the imaginary permittivity (ε'') of MoS2-NS/wax is twice as large as that of MoS2-Bulk/wax. The minimum reflection loss (RL) value of MoS2-NS/wax with 60 wt% loading is -38.42 dB at a thickness of 2.4 mm, which is almost 4 times higher than that of MoS2-Bulk/wax, and the corresponding bandwidth with effective attenuation (<-10 dB) of MoS2-NS/wax is up to 4.1 GHz (9.6-13.76 GHz). The microwave absorption performance of MoS2-NS is comparable to those reported in carbon-related nanomaterials. The enhanced microwave absorption performance of MoS2-NS is attributed to the defect dipole polarization arising from Mo and S vacancies and its higher specific surface area. These results suggest that MoS2-NS is a promising candidate material not only in fundamental studies but also in practical microwave applications.
RESUMO
Ideal electromagnetic attenuation material should not only shield the electromagnetic interference but also need strong absorption. Lightweight microwave absorber with thermal stability and high efficiency is a highly sought-after goal of researchers. Tuning microwave absorption to meet the harsh requirements of thermal environments has been a great challenge. Here, grape-like Fe3O4-multiwalled carbon nanotubes (MWCNTs) are synthesized, which have unique multiscale-assembled morphology, relatively uniform size, good crystallinity, high magnetization, and favorable superparamagnetism. The Fe3O4-MWCNTs is proven to be a smart microwave-absorber prototype with tunable high intensities in double belts in the temperature range of 323-473 K and X band. Maximum absorption in two absorbing belts can be simultaneously tuned from â¼-10 to â¼-15 dB and from â¼-16 to â¼-25 dB by varying temperature, respectively. The belt for reflection loss ≤-20 dB can almost cover the X band at 323 K. The tunable microwave absorption is attributed to effective impedance matching, benefiting from abundant interfacial polarizations and increased magnetic loss resulting from the grape-like Fe3O4 nanocrystals. Temperature adjusts the impedance matching by changing both the dielectric and magnetic loss. The special assembly of MWCNTs and magnetic loss nanocrystals provides an effective pathway to realize excellent absorbers at elevated temperature.
RESUMO
This paper presents for the first time a successful synthesis of quaternary nanocomposites consisting of graphene, Fe(3)O(4)@Fe core/shell nanopariticles, and ZnO nanoparticles. Transmission electron microscopy measurements show that the diameter of the Fe(3)O(4)@Fe core/shell nanoparitcles is about 18 nm, the Fe(3)O(4) shell's thickness is about 5 nm, and the diameter of ZnO nanoparticles is in range of 2-10 nm. The measured electromagnetic parameters show that the absorption bandwidth with reflection loss less than -20 dB is up to 7.3 GHz, and in the band range more than 99% of electromagnetic wave energy is attenuated. Moreover, the addition amount of the nanocomposites in the matrix is only 20 wt %. Therefore, the excellent electromagnetic absorption properties with lightweight and wide absorption frequency band are realized by the nanocomposites.