An IoT-Based Road Bridge Health Monitoring and Warning System.

Recent earthquakes worldwide have led to significant loss of life and structural damage to infrastructure, especially road bridges. Existing bridge monitoring systems have limitations, including restricted detection capabilities, subjectivity, human error, labor-intensive inspections, limited access to remote areas, and high costs. Aging infrastructures pose a critical concern for organizations and government funding policies, showing signs of decay and impending structural failure. To address these challenges, this research proposes an IoT-based bridge health status monitoring and warning system that is wireless, low-cost, durable, and user-friendly. The proposed system builds upon engineering standards and guidelines to classify bridge health status into categories ranging from excellent to collapse condition. It incorporates deflection, vibration, temperature, humidity, and infrared sensors, combined with IoT and a fuzzy logic algorithm. The primary objective is to reduce bridge maintenance costs, extend lifespans, and enhance transportation safety through an early warning system via a mobile application. Additionally, a Google Maps interface has been developed to display bridge conditions along with real-time traffic video. To validate the proposed system, a 3-D prototype model was constructed and tested. Practical testing of the fuzzy logic algorithm aligned with the simulation outcomes, demonstrating expected accuracy in determining bridge health status.

Contactless Technologies, Sensors, and Systems for Cardiac and Respiratory Measurement during Sleep: A Systematic Review.

Sleep is essential to physical and mental health. However, the traditional approach to sleep analysis-polysomnography (PSG)-is intrusive and expensive. Therefore, there is great interest in the development of non-contact, non-invasive, and non-intrusive sleep monitoring systems and technologies that can reliably and accurately measure cardiorespiratory parameters with minimal impact on the patient. This has led to the development of other relevant approaches, which are characterised, for example, by the fact that they allow greater freedom of movement and do not require direct contact with the body, i.e., they are non-contact. This systematic review discusses the relevant methods and technologies for non-contact monitoring of cardiorespiratory activity during sleep. Taking into account the current state of the art in non-intrusive technologies, we can identify the methods of non-intrusive monitoring of cardiac and respiratory activity, the technologies and types of sensors used, and the possible physiological parameters available for analysis. To do this, we conducted a literature review and summarised current research on the use of non-contact technologies for non-intrusive monitoring of cardiac and respiratory activity. The inclusion and exclusion criteria for the selection of publications were established prior to the start of the search. Publications were assessed using one main question and several specific questions. We obtained 3774 unique articles from four literature databases (Web of Science, IEEE Xplore, PubMed, and Scopus) and checked them for relevance, resulting in 54 articles that were analysed in a structured way using terminology. The result was 15 different types of sensors and devices (e.g., radar, temperature sensors, motion sensors, cameras) that can be installed in hospital wards and departments or in the environment. The ability to detect heart rate, respiratory rate, and sleep disorders such as apnoea was among the characteristics examined to investigate the overall effectiveness of the systems and technologies considered for cardiorespiratory monitoring. In addition, the advantages and disadvantages of the considered systems and technologies were identified by answering the identified research questions. The results obtained allow us to determine the current trends and the vector of development of medical technologies in sleep medicine for future researchers and research.

A secure remote health monitoring model for early disease diagnosis in cloud-based IoT environment.

Internet of Things (IoT) and smart medical devices have improved the healthcare systems by enabling remote monitoring and screening of the patients' health conditions anywhere and anytime. Due to an unexpected and huge increasing in number of patients during coronavirus (novel COVID-19) pandemic, it is considerably indispensable to monitor patients' health condition continuously before any serious disorder or infection occur. According to transferring the huge volume of produced sensitive health data of patients who do not want their private medical information to be revealed, dealing with security issues of IoT data as a major concern and a challenging problem has remained yet. Encountering this challenge, in this paper, a remote health monitoring model that applies a lightweight block encryption method for provisioning security for health and medical data in cloud-based IoT environment is presented. In this model, the patients' health statuses are determined via predicting critical situations through data mining methods for analyzing their biological data sensed by smart medical IoT devices in which a lightweight secure block encryption technique is used to ensure the patients' sensitive data become protected. Lightweight block encryption methods have a crucial effective influence on this sort of systems due to the restricted resources in IoT platforms. Experimental outcomes show that K-star classification method achieves the best results among RF, MLP, SVM, and J48 classifiers, with accuracy of 95%, precision of 94.5%, recall of 93.5%, and f-score of 93.99%. Therefore, regarding the attained outcomes, the suggested model is successful in achieving an effective remote health monitoring model assisted by secure IoT data in cloud-based IoT platforms.

Real-time data analysis in health monitoring systems: A comprehensive systematic literature review.

Health monitoring systems (HMSs) capture physiological measurements through biosensors (sensing), obtain significant properties and measures from the output signal (perceiving), use algorithms for data analysis (reasoning), and trigger warnings or alarms (acting) when an emergency occurs. These systems have the potential to enhance health care delivery in different application domains, showing promising benefits for health diagnosis, early symptom detection, disease prediction, among others. However, the implementation of HMS presents challenges for sensing, perceiving, reasoning, and acting based on monitored data, mainly when data processing should be performed in real time. Thus, the quality of these diagnoses relies heavily on the data and data analysis methods applied. Data mining techniques have been broadly investigated in health systems; however, it is not clear what real-time data analysis techniques are best suited for each context. This work carries out a search in five scientific electronic databases to identify recent studies that investigated HMS using real-time data analysis techniques. Thirty-six research studies were selected after screening 2,822 works. Applied data analysis methods, application domains, utilized sensors, physiological parameters, extracted features, claimed benefits, limitations, datasets used, and published results were described, compared and analyzed. The findings indicate that machine learning methods are trending in such studies. There is no universal solution for all health domains; however, support vector machines are a predominant method. Among the application domains, cardiovascular disease is the most investigated. Most reviewed studies reported improvements in performing data mining tasks or operational modes of solutions. Although studies tested algorithms and presented promising results, those are particular for each experiment. This review gives a comprehensive overview of HMS real-time data analysis and points to directions for future research.

From Molecular Reconstruction of Mesoscopic Functional Conductive Silk Fibrous Materials to Remote Respiration Monitoring.

Turning insulating silk fibroin materials into conductive ones turns out to be the essential step toward achieving active silk flexible electronics. This work aims to acquire electrically conductive biocompatible fibers of regenerated Bombyx mori silk fibroin (SF) materials based on carbon nanotubes (CNTs) templated nucleation reconstruction of silk fibroin networks. The electronical conductivity of the reconstructed mesoscopic functional fibers can be tuned by the density of the incorporated CNTs. It follows that the hybrid fibers experience an abrupt increase in conductivity when exceeding the percolation threshold of CNTs >35 wt%, which leads to the highest conductivity of 638.9 S m-1 among organic-carbon-based hybrid fibers, and 8 times higher than the best available materials of the similar types. In addition, the silk-CNT mesoscopic hybrid materials achieve some new functionalities, i.e., humidity-responsive conductivity, which is attributed to the coupling of the humidity inducing cyclic contraction of SFs and the conductivity of CNTs. The silk-CNT materials, as a type of biocompatible electronic functional fibrous material for pressure and electric response humidity sensing, are further fabricated into a smart facial mask to implement respiration condition monitoring for remote diagnosis and medication.

Non-Invasive Electromagnetic Skin Patch Sensor to Measure Intracranial Fluid-Volume Shifts.

Elevated intracranial fluid volume can drive intracranial pressure increases, which can potentially result in numerous neurological complications or death. This study's focus was to develop a passive skin patch sensor for the head that would non-invasively measure cranial fluid volume shifts. The sensor consists of a single baseline component configured into a rectangular planar spiral with a self-resonant frequency response when impinged upon by external radio frequency sweeps. Fluid volume changes (10 mL increments) were detected through cranial bone using the sensor on a dry human skull model. Preliminary human tests utilized two sensors to determine feasibility of detecting fluid volume shifts in the complex environment of the human body. The correlation between fluid volume changes and shifts in the first resonance frequency using the dry human skull was classified as a second order polynomial with R² = 0.97. During preliminary and secondary human tests, a ≈24 MHz and an average of ≈45.07 MHz shifts in the principal resonant frequency were measured respectively, corresponding to the induced cephalad bio-fluid shifts. This electromagnetic resonant sensor may provide a non-invasive method to monitor shifts in fluid volume and assist with medical scenarios including stroke, cerebral hemorrhage, concussion, or monitoring intracranial pressure.

Wearable Sensor Localization Considering Mixed Distributed Sources in Health Monitoring Systems.

In health monitoring systems, the base station (BS) and the wearable sensors communicate with each other to construct a virtual multiple input and multiple output (VMIMO) system. In real applications, the signal that the BS received is a distributed source because of the scattering, reflection, diffraction and refraction in the propagation path. In this paper, a 2D direction-of-arrival (DOA) estimation algorithm for incoherently-distributed (ID) and coherently-distributed (CD) sources is proposed based on multiple VMIMO systems. ID and CD sources are separated through the second-order blind identification (SOBI) algorithm. The traditional estimating signal parameters via the rotational invariance technique (ESPRIT)-based algorithm is valid only for one-dimensional (1D) DOA estimation for the ID source. By constructing the signal subspace, two rotational invariant relationships are constructed. Then, we extend the ESPRIT to estimate 2D DOAs for ID sources. For DOA estimation of CD sources, two rational invariance relationships are constructed based on the application of generalized steering vectors (GSVs). Then, the ESPRIT-based algorithm is used for estimating the eigenvalues of two rational invariance matrices, which contain the angular parameters. The expressions of azimuth and elevation for ID and CD sources have closed forms, which means that the spectrum peak searching is avoided. Therefore, compared to the traditional 2D DOA estimation algorithms, the proposed algorithm imposes significantly low computational complexity. The intersecting point of two rays, which come from two different directions measured by two uniform rectangle arrays (URA), can be regarded as the location of the biosensor (wearable sensor). Three BSs adopting the smart antenna (SA) technique cooperate with each other to locate the wearable sensors using the angulation positioning method. Simulation results demonstrate the effectiveness of the proposed algorithm.

CCS_WHMS: A Congestion Control Scheme for Wearable Health Management System.

Wearable computing is becoming a more and more attracting field in the last years thanks to the miniaturisation of electronic devices. Wearable healthcare monitoring systems (WHMS) as an important client of wearable computing technology has gained a lot. Indeed, the wearable sensors and their surrounding healthcare applications bring a lot of benefits to patients, elderly people and medical staff, so facilitating their daily life quality. But from a research point of view, there is still work to accomplish in order to overcome the gap between hardware and software parts. In this paper, we target the problem of congestion control when all these healthcare sensed data have to reach the destination in a reliable manner that avoids repetitive transmission which wastes precious energy or leads to loss of important information in emergency cases, too. We propose a congestion control scheme CCS_WHMS that ensures efficient and fair data delivery while used in the body wearable system part or in the multi-hop inter bodies wearable ones to get the destination. As the congestion detection paradigm is very important in the control process, we do experimental tests to compare between state of the art congestion detection methods, using MICAz motes, in order to choose the appropriate one for our scheme.

Enhancing stress measurements accuracy control in the construction of long-span bridges.

This paper introduces new contributions for construction procedures designed to enhance the robustness and precision of stress control in active anchorage and short presetressing units for long-span bridges, particularly addressing potential technical risks. The primary focus is on optimizing stress management for bridge stays, suspension cables, and short prestressing units by emphasizing a unified parameter: stress. The contributions of this research encompass (1) the introduction of advanced load cells for stress control in active anchorages and (2) the implementation of a novel synchronized multi-strain gage load cell network for short prestressing units, crucial in situations where prestressing losses can attain significant magnitudes. To validate these advancements, the authors present (3) a practical experience and results obtained from applying these methodologies in monitoring the structural response during the construction of the Tajo Bridge using the cable-stayed cantilever technique.

A non-invasive machine learning mechanism for early disease recognition on Twitter: The case of anemia.

Social media sites, such as Twitter, provide the means for users to share their stories, feelings, and health conditions during the disease course. Anemia, the most common type of blood disorder, is recognized as a major public health problem all over the world. Yet very few studies have explored the potential of recognizing anemia from online posts. This study proposed a novel mechanism for recognizing anemia based on the associations between disease symptoms and patients' emotions posted on the Twitter platform. We used k-means and Latent Dirichlet Allocation (LDA) algorithms to group similar tweets and to identify hidden disease topics. Both disease emotions and symptoms were mapped using the Apriori algorithm. The proposed approach was evaluated using a number of classifiers. A higher prediction accuracy of 98.96 % was achieved using Sequential Minimal Optimization (SMO). The results revealed that fear and sadness emotions are dominant among anemic patients. The proposed mechanism is the first of its kind to diagnose anemia using textual information posted on social media sites. It can advance the development of intelligent health monitoring systems and clinical decision-support systems.

Framework of sensor-based monitoring for pervasive patient care.

Sensor-based health systems can often become difficult to use, extend and sustain. The authors propose a framework for designing sensor-based health monitoring systems aiming to provide extensible and usable monitoring services in the scope of pervasive patient care. The authors' approach relies on a distributed system for monitoring the patient health status anytime-anywhere and detecting potential health complications, for which healthcare professionals and patients are notified accordingly. Portable or wearable sensing devices measure the patient's physiological parameters, a smart mobile device collects and analyses the sensor data, a Medical Center system receives notifications on the detected health condition, and a Health Professional Platform is used by formal caregivers in order to review the patient condition and configure monitoring schemas. A Service-oriented architecture is utilised to provide extensible functional components and interoperable interactions among the diversified system components. The framework was applied within the REMOTE ambient-assisted living project in which a prototype system was developed, utilising Bluetooth to communicate with the sensors and Web services for data exchange. A scenario of using the REMOTE system and preliminary usability results show the applicability, usefulness and virtue of our approach.