Bond strength of different orthodontic brackets produced with different materials and fabrication methods / Resistência de união de bráquetes ortodônticos produzidos com diferentes materiais e métodos de fabricação

Objective: The aim of this study was to evaluate the effects of material and processing methods on the bond strength of orthodontic brackets. Material and Methods: Five types of brackets were tested: Conventional metallic (CM), metallic sandblasted (SB), ceramic (C), polycarbonate (PC), and metallic fabricated by melting injection molding (MIM). Shear bond strength (SBS) was conducted to check bond strength of the brackets bonded to bovine teeth (n=10/group), and tensile bond strength (TBS) (20 brackets/group) to check bracket retention to bonding material (n=20/group). Both, SBS and TBS were conducted with 1mm/min crosshead speed in a universal testing machine. Bond strength was calculated in Megapascal (MPa) based on force (N) and bracket area (mm 2). Data normality was verified, and One-way ANOVA was the statistical test with Tukey post-hoc (α=0.05). Results: SB and MIM presented higher SBS compared to C, PC, and CM (p<0.05). SB and MIM also presented significantly higher TBS compared to CM and PC (p<0.05). However, MIM was not different of C for TBS. Conclusion: The type of material and method of fabrication are determinant factors that affect bond strength of orthodontic brackets and melting injection molding (MIM) is a remarkable technology to improve brackets retention during the orthodontic treatment. (AU)

Objetivo: O objetivo deste estudo foi avaliar os efeitos dos materiais e métodos de processamento na resistência de união de bráquetes ortodônticos. Material e Métodos: Cinco tipos de bráquetes foram testados: Convencionais metálicos (CM), metálicos jateados (SB), cerâmico (C), policarbonato (PC), e metálico fabricado por injeção de metal fundido em molde (MIM). A resistência de união ao cisalhamento (SBS) foi conduzida para verificar a resistência de união dos bráquetes aderidos a dentes bonivos (n=10/grupo) e a resistência à tração (TBS) (20 bráquetes/grupo) para verificar a retenção do bráquete ao material adesivo (n=20/grupo). SBS e TBS foram conduzidas com relação carga/velocidade de 1mm/min em uma máquina de ensaios universal. A resistência de união foi calculada em Megapascal (MPa) com base na força (N) pela área do bráquete (mm 2). A normalidade dos dados e a estatística foi realizada utilizando One-way ANOVA e Tukey post-hoc (α=0.05). SB e MIM apresentaram os maiores valores de SBS comparados com C, PC e CM (p<0.05). Resultados: SB e MIM também apresentaram valores significativamente maiores de TBS comparados com CM e PC (p<0.05). Contudo, os valores de TBS para o grupo MIM não foram significativamente diferentes de C. Conclusão: O tipo de material e o método de fabricação são fatores determinantes que afetam a resistência de união de bráquetes ortodônticos e a injeção de metal fundido em molde (MIM) é uma tecnologia relevante para melhorar a retenção dos bráquetes durante o tratamento ortodôntico. (AU)

Titanium dioxide nanotubes added to glass ionomer cements affect S. mutans viability and mechanisms of virulence

Abstract This in vitro study evaluated the impact of TiO2 nanotubes (n-TiO2) incorporated into glass ionomer cement (GIC) on Streptococcus mutans (S. mutans) characteristics at cellular and molecular levels. n-TiO2, synthesized by the alkaline method (20 nm in size), was added to Ketac Molar EasyMix® at 0%, 3%, 5%, and 7% by weight. S. mutans strains were cultured on GIC disks with addition or not of n-TiO2 for 1, 3, and 7 days and the following parameters were assessed: inhibition halo (mm) (n=3/group); cell viability (live/dead) (n=5/group); cell morphology (SEM) (n=3/group); and gene expression by real-time PCR (vicR, covR, gtfB, gtfC, and gtfD) (n=6/group). The data were analyzed by the Kruskal-Wallis test, repeated-measures ANOVA or two-way ANOVA, and Tukey's and Dunn's post-hoc tests (α=0.05). The agar diffusion test showed a higher antibacterial property for 5% n-TiO2 compared with 3% and 7% (p<0.05) with no effect of time (1, 3, and 7 days). The cell number was significantly affected by all n-TiO2 groups, while viability was mostly affected by 3% and 5% n-TiO2, which also affected cell morphology and organization. Real-time PCR demonstrated that n-TiO2 reduced the expression of covR when compared with GIC with no n-TiO2 (p<0.05), with no effect of time, except for 3% n-TiO2 on vicR expression. Within-group and between-group analyses revealed n-TiO2 did not affect mRNA levels of gtfB, gtfC, and gtfD (p>0.05). Incorporation of n-TiO2 at 3% and 5% potentially affected S. mutans viability and the expression of key genes for bacterial survival and growth, improving the anticariogenic properties of GIC.

Antimicrobial activity of mouth rinses against bacteria that initially colonizes dental's surface / Atividade antimicrobiana de enxaguatórios bucais sobre bactérias que iniciam a colonização das superfícies dentais

Abstract Introduction Much advertising in mouthwash is conveyed in all media appealing to the anti-plaque effect and rendering a disservice to the community. Mouth rinses are available over-the-count and differ on their compositions and antimicrobial effectiveness. Objective In this study, we evaluated the antimicrobial activity of 35 widely available mouth rinses against bacterial species involved in initiation of dental biofilm - Streptococcus gordonii, Streptococcus mitis, Streptococcus oralis, Streptococcus salivarius, and Streptococcus sanguinis. Material and method The Minimum Inhibitory Concentration (MIC) and the Minimum Bactericidal Concentration (MBC) of the evaluated mouth rinses were determined according to the Clinical & Laboratory Standards Institute protocols. Data were submitted to Kruskal-Wallis test and Mann-Whitney post hoc (α=0.05). Result About 70% of the mouth rinses achieved high antibacterial activity and 30%, a low antibacterial activity against all the species tested. The most ineffective mouth rinse showed antibacterial activity (MIC) at 1:1 dilution, while the most effective showed activity even at 1:2048 dilution, which may imply prolonged effect in the mouth. About 51% of mouth rinses showed bactericidal activity, and it was verified that cetylpyridinium chloride or chlorhexidine digluconate containing in the formulation were associated with the highest activity. Conclusion Most - but not all - mouth rinses commercially available are effective in inhibiting in vitro initial colonizers of dental surfaces.

Resumo Introdução Muita publicidade sobre enxaguatórios bucais é veiculada em todos os meios de comunicação apelando para o efeito anti-placa e prestando um desserviço à comunidade. Grande quantidade de enxaguatórios bucais está disponível no mercado e estes diferem em suas composições e eficácia antimicrobiana. Objetivo Neste estudo, avaliamos a atividade antimicrobiana de 35 enxaguatórios bucais amplamente disponíveis contra espécies bacterianas envolvidas na iniciação do biofilme dental - Streptococcus gordonii, Streptococcus mitis, Streptococcus oralis, Streptococcus salivarius e Streptococcus sanguinis. Material e método A Concentração Inibitória Mínima (CIM) e a Concentração Bactericida Mínima (CBM) dos enxaguatórios avaliados foram determinadas de acordo com os protocolos do Clinical & Laboratory Standards Institute. Os dados foram submetidos ao teste Kruskal-Wallis e Mann-Whitney post hoc (α=0,05). Resultado Aproximadamente 70% dos enxaguatórios bucais alcançaram alta atividade antibacteriana e 30%, baixa atividade antibacteriana contra todas as espécies testadas. O enxaguatório bucal mais ineficaz mostrou atividade antibacteriana (CIM) na diluição de 1:1, enquanto a mais eficaz mostrou atividade mesmo na diluição de 1:2048, o que pode implicar em efeito prolongado na boca. Cerca de 51% dos enxaguatórios bucais apresentaram atividade bactericida, e verificou-se que formulações contendo cloreto de cetilpiridíneo ou digluconato de clorexidina estavam associados à maior atividade. Conclusão A maior parte - mas não todos - dos enxaguatórios bucais comercialmente disponíveis são eficazes na inibição de colonizadores iniciais de superfícies dentárias in vitro.

Antibacterial effectiveness in vitro of different formulations of calcium hydroxide paste / Eficácia antibacteriana in vitro de diferentes formulações de pastas de hidróxido de cálcio

ABSTRACT Objective: To evaluate the antibacterial activity of four formulations of calcium hydroxide paste against microorganisms commonly found in infected root canals. Methods: To evaluate antibacterial activity through the agar diffusion method, pastes of calcium hydroxide were made from its pro-analysis form, diffused into four separate vehicles: distilled water, camphorated p-monochlorophenol, propylene glycol and Otosporin®, testing the antimicrobial activity of these on strains of Staphylococcus aureus, Bacillus subtilis and Enterococcus faecalis. After the incubation period, the presence or otherwise of inhibition zones were observed and their sizes in three stages: 24h, 48h and 72h. With this data, the median between the four dishes was obtained and the consequent value was submitted to Kruskal-Wallis nonparametric statistical analysis, with post-tests of Mann-Whitney and Bonferroni correction, at a significance level of 5%. Results: Only pastes with camphorated p-monochlorophenol and Otosporin vehicles caused the formation of significant inhibition zones, with medians of 8.0 mm. Against the strains of Enterococcus faecalis, only pastes with the camphorated p-monochlorophenol vehicle resulted in the formation of significant inhibition zones, with a median of 3.0 mm. Conclusion : Otosporin and CMCP vehicles provide greater antimicrobial potential to calcium hydroxide against the studied bacteria. However, only the Ca(OH)2 and CMCP combination was effective against all the strains, and can thus be regarded as the paste formulation with the greatest antimicrobial effectiveness in this study.

RESUMO Objetivo: Avaliar a ação antibacteriana de quatro formulações de pastas de hidróxido de cálcio contra microrganismos comumente encontrados em canais radiculares infectados. Métodos: Para avaliar a ação antibacteriana, através do método de difusão em ágar, foram preparadas pastas de hidróxido de cálcio a partir de sua forma pró-análise dispersa em quatro veículos distintos: água destilada, paramonoclorofenol canforado, propilenoglicol e Otosporin®, testando o potencial antibacteriano destas sobre cepas de Staphylococcus aureus, Bacillus subtilis e Enterococcus faecalis. Após o período de incubação, foi verificada a pre¬sença ou não de halos de inibição e seus respectivos tamanhos em três momentos: 24h, 48h e 72h. Com os dados, foi obtida uma mediana das quatro placas e o valor encontra¬do submetido à análise estatística não paramé¬trica Kruskall-Wallis, com pós-testes de Mann-Whitney e penalização de Bonferroni, ao nível de significância de 5%. Resultados: Apenas nas pastas com veículos paramonoclorofenol canforado e Otosporin foi observado a formação de halos de inibição significativos, com medianas de 8,0mm. Sobre as cepas de Enterococcus faecalis, somente a pasta com veículo paramonoclorofenol canforado foi observado formação de halo de inibição significativo, com mediana de 3,0mm. Conclusão: Os veículos Otosporin e PMCC possibilitam maior potencial antimicrobiano ao hidróxido de cálcio frente às bactérias estudadas. No entanto, somente a associação Ca(OH)2 e PMCC foi efetiva contra todas as cepas, e assim pode ser considerada como a formulação de pasta de maior efetividade antimicrobiana neste estudo.

Clinical evaluation of two materials in the restoration of abfraction lesions

Aim: To evaluate the clinical performance of a composite resin (CR) and a resin-modified glass-ionomer cement (RMGIC) for the treatment of abfraction lesions. Methods: Thirty patients with abfraction lesions in at least two premolar teeth were selected and invited to participate in this study. All restorations were made within the same clinical time frame. One tooth was restored with CR Z100TM (3M, St. Paul, MN, USA), and the other was restored with RMGIC VitremerTM (3M). The restorations were assessed immediately and 1, 6 and 12 months after the restoration, using modified US Public Health Service (USPHS) criteria: marginal integrity, marginal discoloration, wear, retention, secondary caries and hypersensitivity. The statistical analysis was based on Friedman ANOVA test and Mann-Whitney test, considering p<0.05 for statistical significance. Results: Both materials demonstrated satisfactory clinical performance after one year. In the individual analysis of each material, there was a significant difference (p<0.05) in the criteria marginal integrity and wear, for both CR and RMGIC. RMGIC exhibited more damage one year after the restoration. Comparing both materials, it was found a significant difference only for marginal discoloration, while the RMGIC restorations showed the worst prognosis after a year of evaluation. There was no significant difference in the number of retentions, caries or hypersensitivity between CR and RMGIC. Conclusions: It was concluded that CR exhibited the best clinical performance according to the cost-effectiveness and evaluation criteria used in this study.