Expression, purification, and functional verification of recombinant human glycoprotein hormone beta 5/alpha 2 fusion protein in CHO-S cells / 中国药理学通报

Aim To express and purify recombinant hCGH-CTP fusion protein in high-density suspension culture of Chinese hamster ovary cells (CHO-S), and to verify the lipid accumulation effect of rhCGH-CTP on 3T3-L1 mature adipocytes. Methods The recombinant protein expression vector (pcDNA3. 1-rhCGH-CTP) was constructed, achieved by fusing the human glycoprotein hormone beta 5/alpha 2 cDNA with CTP Linker. The expression plasmid was transiently transfected into the suspended CHO-S to express rhCGH-CTP protein and then purified, and the protein biological activity was verified. Intervention with 3T3-L1 mature adipocyte cells for 24 h was performed to detect the changes of intracellular triglyceride (TG) level. Results Western blot results showed that rhCGH-CTP protein was successfully expressed in CHO-S cells, and the yield was up to 715. 4 mg • L~ . The secreted protein was purified by AKTA pure system with higher purity that was up to 90% as identified by SDS-PAGE. In addition, the intracellular cAMP content of mature adipocytes with high expression of TSHR gene significantly increased after intervention with different concentrations of rhCGH-CTP protein by ELISA kit, indicating that rhCGH-CTP protein had biological activity. Oil red 0 staining showed that compared with the control group, the lipid content of mature adipocytes in the intervention groups with different concentrations of rhCGH-CTP protein significantly decreased (P < 0. 05) . Conclusions The rhCGH-CTP protein has been successfully expressed and purified with biological activity, and effectively reduce TG. This research provides an important theoretical basis for further revealing the physiological role of CGH protein and its potential application in clinical practice.

Surveillance of Aedes populations in Jiangsu Province in 2020 / 中国血吸虫病防治杂志

Objective To investigate the seasonal Aedes population fluctuation and the resistance of Aedes populations to common insecticides in Jiangsu Province in 2020, so as to provide insights into vector-borne infectious diseases control.. Methods One village was randomly sampled from each of Xinbei District of Changzhou City and Zhangjiagang County of Suzhou City in southern Jiangsu Province, Hai’an County of Nantong City and Yandu District of Yancheng City in Central Jiangsu Province, and Suining County of Xuzhou City and Sihong County of Suqian City in northern Jiangsu Province during the period between May and October, 2020. A small ponding container was sampled, and larval Aedes mosquitoes were collected using straws once each in early and late stages of each month. All larvae were bred in laboratory to adults for population identification. In addition, larval breeding were observed in all small ponding containers in and out of 30 households that were randomly sampled from six surveillance sites, and the larval mosquito density was estimated using Breteau index. Larval A. albopictus mosquitoes were sampled around Cuiyuan New Village in Jintan District of Changzhou City, and bred in laboratory to the first offspring generation, and the susceptibility of adult female mosquitoes to deltamethrin, lambda-cyhalothrin, malathion, and propoxur was tested using the filter-paper bioassay recommended by WHO. Results A total of 1 165 larval Aedes mosquitoes were captured from small ponding containers in six surveillance sites of Jiangsu Province in 2020, and all were identified as A. albopictus following eclosion. The largest number of Aedes larvae captured was found in July. A total of 1 152 households were investigated in six surveillance sites, and the mean Breteau indexes were 9.58, 13.20, 13.71, 13.20, 12.18 and 5.58 from May to October, respectively, while a high Aedes transmission risk was seen in Xinbei District of Changzhou City, with a higher Breteau index than in Suining (H = 23.667, Padjusted = 0.001) and Sihong (H = 22.500, Padjusted = 0.003) counties. The field-captured A. albopictus from Cuiyuan New Village in Jintan District of Changzhou City remained sensitive to malathion, but was resistant to propoxur, and developed high-level resistance to deltamethrin and lambda-cyhalothrin. Conclusions A. albopictus was present in southern, central and northern Jiangsu Province in 2020, and the larval density peaked in July. A. albopictus captured from Cuiyuan New Village in Jintan District of Changzhou City has developed high-level resistance to pyrethroid pesticides.

Progress in the role of peritubular capillary injury in kidney transplantation / 器官移植

Kidney is a highly vascularized organ and peritubular capillary network constitutes the critical component of its microvascular system. Peritubular capillaries, as the main vessels for blood supply in renal tubules and renal interstitium, involve in important physiological processes in renal tubules such as energy metabolism, substance secretion and reabsorption. In recent years, it has been demonstrated that ischemia-reperfusion injury, rejection and renal fibrosis during kidney transplantation would result in compromised structural integrity and decreased number in peritubular capillaries, thus leading to interstitial fibrosis in renal allograft, which would seriously affect the long-term stability of renal function in the renal allograft. Therefore, we reviewed the structure and function of peritubular capillary, peritubular capillary and ischemia-reperfusion injury, rejection and renal allograft fibrosis, focusing on the mechanism for peritubular capillary injury in kidney transplantation and the specific changes manifested, with the aim of providing a reference for preventing and treating perioperative complications in kidney transplantation and improving the long-term prognosis of grafts.

Application status of generalized periodic discharges in continuous electroencephalography monitoring in hypoxic-ischemic encephalopathy / 中华神经科杂志

In the electroencephalography (EEG) monitoring of patients with hypoxic-ischemic encephalopathy, generalized periodic discharges are often monitored abnormal waveforms. When there are some features of generalized periodic discharges (e.g., frequency≥1.5 Hz or plus), it indicates that the patient is at high risk for seizures or has a poor prognosis. Compared with conventional EEG, the time of continuous EEG monitoring is longer, so the detection rate of these waveforms is higher. At present, scholars at home and abroad have studied these waveforms, but there is controversy about the significance of these waveforms. In this paper, the definition and characteristics of these waveforms and their significance in determining prognosis and guiding treatment in patients with hypoxic-ischemic encephalopathy are reviewed.

Expression, purification and functional verification of recombinant human α-galactosidase A in suspension CHO-S / 中国药理学通报

Aim To express and purify rhα-Gal A with a 6 X His tag via using a serum-free expression system in high-density suspension culture of Chinese hamster ovary cells ( CHO-S) , and to verify the scavenging effect of rhα-Gal A on globular trisaccharide ceramide (Gb3 or GL3) . Methods The construction of recombinant protein expression vector, pcDNA4-GLA, was achieved by fusing the human α-galactosidase cDNA, gla, with 6 X His tag and artificial DNA synthesis. The expression plasmid was transfected into the suspended CHO-S to express rhα-Gal A and then purified. Following this procedure, we determined rhα-Gal A's expression, the enzymatic activity, and the glycosylation of the recombinant enzyme. Co-incubation with cultured cells was performed to examine whether rhα-Gal A could be taken up into the cells and effectively remove Gb3 substrates. Results rhα-Gal A was successfully expressed and purified after transiently transfecting pcDNA4-GLA into the suspended CHO-S, and the yield was up to (100 ±20. 6) mg • L

Metabonomics Analysis of Brain Stem Tissue in Rats with Primary Brain Stem Injury Caused Death / 法医学杂志

OBJECTIVES@#To explore the potential biomarkers for the diagnosis of primary brain stem injury (PBSI) by using metabonomics method to observe the changes of metabolites in rats with PBSI caused death.@*METHODS@#PBSI, non-brain stem brain injury and decapitation rat models were established, and metabolic maps of brain stem were obtained by LC-MS metabonomics method and annotated to the HMDB database. Partial least square-discriminant analysis (PLS-DA) and random forest methods were used to screen potential biomarkers associated with PBSI diagnosis.@*RESULTS@#Eighty-six potential metabolic markers associated with PBSI were screened by PLS-DA. They were modeled and predicted by random forest algorithm with an accuracy rate of 83.3%. The 818 metabolic markers annotated to HMDB database were used for random forest modeling and prediction, and the accuracy rate was 88.9%. According to the importance in the identification of cause of death, the most important metabolic markers that were significantly up-regulated in PBSI group were HMDB0038126 (genipinic acid, GA), HMDB0013272 (N-lauroylglycine), HMDB0005199 [(R)-salsolinol] and HMDB0013645 (N,N-dimethylsphingosine).@*CONCLUSIONS@#GA, N-lauroylglycine, (R)-salsolinol and N,N-dimethylsphingosine are expected to be important metabolite indicators in the diagnosis of PBSI caused death, thus providing clues for forensic medicine practice.

Application of body temperature rinse in percutaneous transforaminal endoscopic lumbar discectomy through intervertebral approach / 中国骨伤

OBJECTIVE@#To investigate the effects of two types of temperature rinses on body temperature, inflammatory cytokine levels, and bleeding volume in percutaneous endoscopic lumbar discectomy.@*METHODS@#Eighty patients underwent percutaneous endoscopic lumbar discectomy from January 2018 to December 2020 were selected and divided into experimental group (40 cases) and control group(40 cases). In experimental group, there were 19 males and 21 females, aged (38.8±9.8) years old;7patients on L4,5 and 33 patients on L5S1;Body msss index(BMI) was (27.8±7.2) kg·m-2. In contral group, there were 18 males and 22 females, aged (41.5±10.9) years old, 5 patients on L4,5 and 35 patients on L5S1;BMI was (26.4±6.2) kg·m-2. The patients in the control group were received normal saline rinse at room temperature, and the patients in the experimental group were received normal saline rinse heated to 37 ℃. Body temperature, chills, nausea, vomiting, and other adverse reactions were recorded. The levels of tumor necrosis factor-α (TNF-α), interleukin-6 (IL-6) and interleukin-10 (IL-10) in two groups were recorded before and 2 hours after operation. Visual analogue scale (VAS) was used to evaluate the degree of lumbar pain in two groups before and 2 hours after surgery. Fibrinolytic-coagulation indexes with preoperative and 2 hours after surgery, including the D-dimer (DD), fibrinogen degradation products (FDP), activated partial thrombin time (APTT) and prothrombin time (PT) were recorder. Operation time and blood loss in two groups were recorded.@*RESULTS@#The body temperature of both groups showed a downward trend, while the body temperature of the control group was lower than that of the experimental group. The levels of TNF-α, IL-6 and IL-10 in two groups were increased 2 hours after surgery compared with those before surgery(P<0.05), while the levels in experimental group were lower than those in control group(P<0.05). Postoperative VAS in experimental group 2.19±1.13 was significantly lower than that in the control group 3.38±1.35(P<0.05). The levels of DD and FDP at 2 hours after surgery in both groups were higher than those before surgery (P<0.05), while the levels of DD and FDP in the experimental group were higher than those in the control group (P<0.05). There was no significant difference in APTT and PT levels between two groups after operation (P>0.05). The blood loss in the experimental group of (45.2±14.1) ml was lower than that in the control group of (59.52±15.6) ml. The operation time of experimental group (46.7±13.8) min was less than that of control group (58.3±15.2) min(P<0.05).@*CONCLUSION@#Body temperature rinse can reduce the incidence of adverse reactions, alleviate local inflammatory reactions, reduce intraoperative blood loss and shorten the operation time.

Clinical application effects of two longitudes three transverses method in perforator location of thoracodorsal artery perforator flap and deep wound repair / 中华烧伤杂志

Objective: To explore the clinical application value of two longitudes three transverses method in the location of the perforator of thoracodorsal artery perforator and deep wound repair. Methods: The retrospectively observational study was conducted. From December 2018 to June 2020, 17 patients with deep wounds who were admitted to the Affiliated Hospital of Zunyi Medical University met the inclusion criteria and were included in this study, including 7 males and 10 females, aged 12 to 72 years. The wound areas of patients after debridement were 7 cm×3 cm to 11 cm×7 cm. Two longitudinal lines were located through the midpoint of the armpit, the posterior superior iliac spine, and the protruding point of the sacroiliac joint, and three transverse lines were located 5, 10, and 15 cm below the midpoint of the armpit between the two longitudinal lines, i.e. two longitudes three transverses method, resulting in two trapezoidal areas. And then the thoracodorsal artery perforators in two trapezoidal areas were explored by the portable Doppler blood flow detector. On this account, a single or lobulated free thoracodorsal artery perforator flap or flap that carrying partial latissimus dorsi muscle, with an area of 7 cm×4 cm to 12 cm×8 cm was designed and harvested to repair the wound. The donor sites were all closed by suturing directly. The number and location of thoracodorsal artery perforators, and the distance from the position where the first perforator (the perforator closest to the axillary apex) exits the muscle to the lateral border of the latissimus dorsi in preoperative localization and intraoperative exploration, the diameter of thoracodorsal artery perforator measured during operation, and the flap types were recorded. The survivals of flaps and appearances of donor sites were followed up. Results: The number and location of thoracodorsal artery perforators located before operation in each patient were consistent with the results of intraoperative exploration. A total of 42 perforators were found in two trapezoidal areas, with 2 or 3 perforators each patient. The perforators were all located in two trapezoid areas, and a stable perforator (the first perforator) was located and detected in the first trapezoidal area. There were averagely 1.47 perforators in the second trapezoidal area. The position where the first perforator exits the muscle was 2.1-3.1 cm away from the lateral border of the latissimus dorsi. The diameters of thoracodorsal artery perforators were 0.4-0.6 mm. In this group, 12 cases were repaired with single thoracodorsal artery perforator flap, 3 cases with lobulated thoracodorsal artery perforator flap, and 2 cases with thoracodorsal artery perforator flap carrying partial latissimus dorsi muscle. The patients were followed up for 6 to 16 months. All the 17 flaps survived with good elasticity, blood circulation, and soft texture. Only linear scar was left in the donor area. Conclusions: The two longitudes three transverses method is helpful to locate the perforator of thoracodorsal artery perforator flap. The method is simple and reliable. The thoracodorsal artery perforator flap designed and harvested based on this method has good clinical effects in repairing deep wound, with minimal donor site damage.

Evaluation of the effectiveness of malaria control health education among overseas enterprise employees / 中国血吸虫病防治杂志

Objective To evaluate the effectiveness of health education on knowledge, attitude and practice (KAP) relating to malaria control among overseas enterprise employees. Methods In September 2019, on-site malaria control health education was conducted among all Chinese employees of a China-funded mining enterprise in the Democratic Republic of Congo. The KAP questionnaire for malaria control was generated on the Questionstar website, and the participants were subjected to two questionnaire surveys prior to and 14 months after health education. After the questionnaires were recovered, all valid questionnaires were divided into 4 groups, including the baseline group (the questionnaires filled out by respondents who received health education and participated in two questionnaire surveys before health education), the loss-to-follow-up group (the questionnaires filled out by respondents who received health education but only participated in the questionnaire survey after health education), the retest group (the questionnaires filled out by respondents who received health education and participated in two questionnaire surveys after health education) and the new group (questionnaires filled out by respondents who did not receive health education and only participated in the questionnaire survey after health education) according to subjects’ receiving health education and participation in two questionnaire surveys. The correct rate of malaria control knowledge, the proportion to good attitudes towards malaria control and the proportion of good practices towards malaria control were compared between the baseline group and the loss-to-follow-up group, between the baseline group and the retest group, and between the retest group and the new group. Results A total of 110 and 142 valid questionnaires were recovered during the two surveys, and the recovery rates were 90.9% and 70.3%, respectively. There were 77, 77, 33, and 65 valid questionnaires recovered from the baseline group, the loss-to-follow-up group, the retest group, and the new group, respectively. There were no significant differences in respondents’ gender, age and educational levels between the baseline group and the loss-to-follow-up group (all P values > 0.05), and there were no significant differences between the two groups in terms of the mean score of malaria control knowledge (Z = 2.011, P > 0.05), the mean score of attitudes towards malaria control (t = −0.787, P > 0.05) and the mean score of practices towards malaria control (t = −0.787, P > 0.05). There were significant differences between the retest group and the baseline group in terms of the mean score of malaria control knowledge (10.83 vs. 9.79; Z = −4.017, P < 0.05), the mean score of attitudes towards malaria control (29.48 vs. 28.61; Z = −1.981, P < 0.05) and the mean score of practices towards malaria control (6.43 vs. 5.91; Z = −2.499, P < 0.05). There were no significant differences between the retest group and the new group in terms of gender, age or education levels (all P values > 0.05), and a higher mean score of malaria control knowledge was found in the retest group than in the new group (10.83 vs. 9.81; Z = −2.962, P < 0.05), while no significant differences were seen in the mean score of attitudes towards malaria control (29.48 vs. 30.17; Z = −1.158, P > 0.05) and the mean score of practices towards malaria control (6.43 vs. 6.37; Z = −0.048, P > 0.05) between the two groups. Conclusion Malaria control health education may significantly improve the understanding of malaria control knowledge, positive attitudes towards malaria control and the compliance of practices towards malaria control among overseas enterprise employees.

Application of porous tantalum Jumbo cup in revision of hip arthroplasty / 中国骨伤

OBJECTIVE@#To investigate the clinical effect of porous tantalum Jumbo cup on acetabular reconstruction in revision of total hip arthroplasty.@*METHODS@#From September 2014 to December 2017, 18 patients(18 hips) with acetabular defect were reconstructed by porous tantalum Jumbo cup technology, including 6 males and 12 females;the age ranged from 54 to 76 years old with an average of(63.8±15.3) years. There were 6 cases of paprosky typeⅡA, 8 cases of typeⅡB, 2 cases of typeⅡC and 2 cases of type Ⅲ a. Harris score and visual analogue scale (VAS) were performed before and after operation. Imaging examination was performed to evaluate the position of hip rotation center and prosthesis, and to judge whether acetabular loosening, displacement and complications existed.@*RESULTS@#All cases were followed up for 13 to 49 months, with an average of 20.6 months. Harris score increased from 54.6±4.7 to 86.5±3.2 one year after operation(P<0.01), and VAS score decreased from 6.8±0.7 to 0.8±0.6 one year after operation (P<0.01). The transverse coordinate of hip rotation center was (3.52±0.72) cm before operation and (3.47±0.54) cm after operation (P>0.05). The longitudinal coordinate of hip rotation center was improved from (3.02±0.84) cm before operation to (2.35±0.53) cm after operation (P<0.01). During the follow-up period, the Jumbo cup was well fixed without loosening and displacement, the acetabular cup had bone ingrowth in varying degrees, and no light transmission line and osteolysis around the acetabular cup were found. No complications such as infection and nerve injury occurred.@*CONCLUSION@#The method of reconstructing acetabular bone defect with porous tantalum Jumbo cup is simple and easy, the early stability of acetabulum is good, and the short-term follow-up effect is good.

Mechanical Properties of Novel Interlocking Intramedullary Nail for Fixing Transverse Olecranon Fractures / 医用生物力学

Objective To study the effect of interlocking intramedullary nail on fixing transverse olecranon fracture. Methods Nine pairs of fresh ulna specimens were collected and the transverse fracture model of olecranon was established. Kirschner wire tension band and interlocking intramedullary nail were used to repair the fracture. Cyclic dynamic tension loads with amplitude of 25 N, mean value of 45 N and frequency of 05 Hz were applied to the triceps tendon under simulated elbow flexion conditions of 30°, 45° and 60°, respectively. The fracture displacements of specimens within 300 cycles were recorded in three groups. ResultsAt 30° flexion angle, the fracture displacement of interlocking intramedullary nail group and Kirschner wire tension band group was (1.831±0.333) mm and (3.723±2.390) mm, respectively. At 45° flexion angle, the fracture displacement of interlocking intramedullary nail group and Kirschner wire tension band group was (1.167±0.374) mm and (2.455±0.609) mm, respectively. At 60° flexion angle, the fracture displacement of interlocking intramedullary nail group and Kirschner wire tension band group was (1.407±0.342) mm and (3.112±1.025) mm, respectively. The fracture displacement of interlocking intramedullary nail was smaller. Conclusions The mechanical properties of interlocking intramedullary nail are better than those of Kirschner wire tension band, and the interlocking intramedullary nail is more stable and firmer for fixing transverse olecranon fracture. Moreover, the interlocking intramedullary nail is installed with the operating tool, thus the operation is more accurate and faster, and the operation efficiency is greatly improved.

Mechanics Analysis on Novel Micro-Movement Elastic Implant of Distal Tibiofibular Syndesmosis in Dorsiflexion Position / 医用生物力学

Objective To study mechanical properties of the novel micro-movement elastic implant of distal tibiofibular syndesmosis in dorsiflexion position.Methods A combination of simulation and experiment was used. The normal ankle dorsiflexion model, the bone nail repaired model and the micro-movement elastic implant repaired model were established by using Mimics and CT data. Besides, ANSYS Workbench was used for finite element analysis. Mechanical experiments on lower limb specimens were conducted on Instron E10000 mechanical test instrument, and five sets of experimental data were measured and analyzed.Results Mechanical properties of the micro-movement elastic implant repaired model were closer to those of the normal ankle dorsiflexion model, but stress of the micro-movement elastic implant repaired mode was greater than that of the bone nail repaired model. The results of two-sample heteroscedasticity t test indicated that there was no significant difference in resistance torque between the micro-movement elastic implant repaired model and the normal ankle dorsiflexion model.Conclusions For dorsiflexion position, repairing mechanical properties of the novel micro-movement elastic implant are much better than those of the bone nail, and there is still room for optimizing the micro-movement elastic implant.

Research advances on mesenchymal stem cells and their derivatives in the treatment of acne scars / 中华烧伤杂志

Acne is a common chronic inflammatory disease of the skin that often occurs on the face, and acne scars are often secondary to the healing process of acne, which often leads to impaired appearance and psychological disorders of patients. The current treatment for acne scars is extremely difficult. With the development of regenerative medicine, stem cell transplantation has become a new treatment for acne scars. In recent years, it has been reported that stem cells and their derivatives can effectively antagonize the formation of acne scars. Therefore, this paper briefly reviews the basic and clinical researches on the treatment of acne scars with various mesenchymal stem cells and their derivatives, aiming to provide theoretical basis and reference for the stem cell therapy of acne scars.

Bone morphogenetic protein 7 mediates stem cells migration and angiogenesis: therapeutic potential for endogenous pulp regeneration / 国际口腔科学杂志·英文版

Pulp loss is accompanied by the functional impairment of defense, sensory, and nutrition supply. The approach based on endogenous stem cells is a potential strategy for pulp regeneration. However, endogenous stem cell sources, exogenous regenerative signals, and neovascularization are major difficulties for pulp regeneration based on endogenous stem cells. Therefore, the purpose of our research is to seek an effective cytokines delivery strategy and bioactive materials to reestablish an ideal regenerative microenvironment for pulp regeneration. In in vitro study, we investigated the effects of Wnt3a, transforming growth factor-beta 1, and bone morphogenetic protein 7 (BMP7) on human dental pulp stem cells (h-DPSCs) and human umbilical vein endothelial cells. 2D and 3D culture systems based on collagen gel, matrigel, and gelatin methacryloyl were fabricated to evaluate the morphology and viability of h-DPSCs. In in vivo study, an ectopic nude mouse model and an in situ beagle dog model were established to investigate the possibility of pulp regeneration by implanting collagen gel loading BMP7. We concluded that BMP7 promoted the migration and odontogenic differentiation of h-DPSCs and vessel formation. Collagen gel maintained the cell adhesion, cell spreading, and cell viability of h-DPSCs in 2D or 3D culture. The transplantation of collagen gel loading BMP7 induced vascularized pulp-like tissue regeneration in vivo. The injectable approach based on collagen gel loading BMP7 might exert promising therapeutic application in endogenous pulp regeneration.

Novel cross-locking intramedullary nails for olecranon: a finite element analysis and specimen experiments / 中华创伤骨科杂志

Objective:To determine the mechanical properties of our self-designed novel cross-locking intramedullary nails and the impact of number of conical locking nails on the fixation through a finite element analysis and specimen experiments.Methods:Mimics 19.0 and SolidWorks 2014 were used to create transverse fracture models of the olecranon which were subjected to fixation with respectively K-wire tension band (KTB) and our self-designed novel cross-locking intramedullary nails (NIN). The strengths of KTB and NIN fixation were analyzed by Ansys. Fifteen human ulna specimens were used to construct a transverse fracture model of the olecranon; an Instron E10000 mechanical testing machine was used to determine mechanical properties in fixation respectively with KTB, one NIN (NIN-1) and 3 NINs (NIN-3).Results:In the finite element analysis, in simulation of the forearm flexed at 45° under a 100 N load, the deformation of the fracture surface of the olecranon in fixation with KTB, NIN-1 and NIN-3 was respectively 0.131 mm, 0.123 mm and 0.121 mm. In the specimen experiments, in simulation of the forearm flexed at 45°, the maximum failure loads for fixation with KTB, NIN-1 and NIN-3 were (313.38±27.68) N, (528.56±53.58) N and (871.04±94.95) N, respectively, showing significant differences among the 3 groups ( P<0.05). The maximum failure load for NIN-3 fixation was significantly greater than that for KTB or NIN-1 fixation, and the maximum failure load for NIN-1 fixation was significantly greater than that for KTB fixation ( P<0.05). Conclusions:Compared with KTB fixation, NIN fixation is more convenient in operation and has better mechanical properties. NIN-3 fixation has the best mechanical properties.

The Crystal Structure and Molecular Docking of CYP76AH3 in the Tanshinone Biosynthesis Pathway / 中国生物化学与分子生物学报

Salvia miltiorrhiza is widely used in the treatment of the angina pectoris, coronary heart disease and myocardial infarction. CYP76AH3 is the key P450 enzyme, locating at the branch point of the tanshinone synthesis pathway. The crystal structural study and key amino acid analysis are of great significance for synthetic biology study on tanshinone. But it is always a challenge for scientists to carry out protein purification, crystallization and crystal structural studies on transmembrane type Ⅱ P450 enzymes. In this study, the prokaryotic expression plasmid was generated, and the high-purity target protein was purified. CYP76AH3 was successfully crystallized, and the crystal structure was solved.After docking range was determined by Cavityplus analysis, molecular docking with Discovery Studio was conducted. The docking result indicated that Gly298 and Asp294 had hydrogen bond interaction with the substrate, while Phe479, Leu367 and Leu293 had hydrophobic interaction with the substrate.In addition, the effect of mutations at the key amino acids on the protein structure stability was predicted throung point mutation simulation. This study would provide a target for protein engineering of CYP76AH3 and lay a foundation for the study of synthesis biology on tanshinones.

Safety and efficacy of transcatheter tricuspid valve replacement with LuX-Valve in patients with severe tricuspid regurgitation / 中华心血管病杂志

Objectives: To evaluate the safety and efficacy of LuX-Valve on the treatment of severe tricuspid regurgitation (TR). Methods: This is a prospective observational study. From September 2018 to March 2019, 12 patients with severe TR, who were not suitable for surgery, received LuX-Valve implantation in Changhai Hospital. LuX-Valve was implanted under general anesthesia and the guidance of transesophageal echocardiography and X-ray fluoroscopy. Access to the tricuspid valve was achieved via a minimally invasive thoracotomy and transatrial approach. Main endpoints were surgery success and device success. Surgery success was defined as successful implanting the device and withdrawing the delivery system, positioning the valve correctly and stably without severe or life-threatening adverse events. Device success was defined as satisfied valve function (TR severity reduction ≥ 2 grades, tricuspid gradient ≤ 6 mmHg (1 mmHg=0.133 kPa)), absence of malposition, valve failure and reintervention, major adverse events including device related mortality, embolization, conduction system disturbances and new onset shunt across ventricular septum at day 30 post implantation. Results: A total of 12 patients with severe to torrential TR were included in this study. The age was (68.5±6.9) years and 7 were female. All patients had typical right heart failure symptoms. Procedural success was achieved in all cases, there was no intraprocedural mortality or transfer to open surgery. TR significantly improved after LuX-Valve implantation (none/trivial in 8 patients, mild in 3 patients and moderate in 1 patient). The average device time was (9.2±4.2) minutes. Intensive care unit duration was 3.0 (2.0, 4.8) days. One patient died at postoperative day 18 due to non-surgery and device reasons. Transthoracic echocardiography at 30 days after operation showed that TR was significantly reduced (none/trivial in 8 patients, mild in 2 patients and moderate in 1 patient) and device success was achieved in 11 cases. All survived patients experienced a significant improvement in life quality with significantly improvement in New York Heart Association (NYHA) classification (Ⅰ and Ⅱ: 6/11 post operation vs. 0/11 before operation, P=0.012) and there were no device related complications in this patient cohort. Conclusions: LuX-Valve implantation is feasible, safe and effective for the treatment of patients with severe TR.

Surveillance of Culex mosquitoes in Jiangsu Province from 2018 to 2019 / 中国血吸虫病防治杂志

Objective To investigate the distribution and density of Culex mosquito populations and the resistance of Culex pipiens pallens to insecticides in Jiangsu Province in 2018 and 2019. Methods During the period from June to October in 2018 and 2019, six counties (districts, cities) were sampled in southern, northern and central Jiangsu Province as surveillance sites. The density of Culex mosquitoes was measured overnight using the light trapping technique. In addition, Culex pipiens pallens mosquitoes were collected from Hai’an of Nantong City and Yandu District of Yancheng City, central Jiangsu Province, and the sensitivity of female first filial generations to dichlorodiphenyltrichloroethane (DDT), malation, proposur, beta cypermethrin and deltamethrin was tested using the standard WHO insecticide susceptibility test assay. Results A total of 104 423 Culex mosquitoes were captured in six surveillance sites of Jiangsu Province in 2018 and 2019, and Culex quinquefasciatus (49.11%), Culex pipiens pallens (28.38%), and Culex tritaeniorhynchus (21.04%) were predominant species. The density of Culex mosquitoes started to increase since early June, peaked in July and tended to be low in late October. Culex pipiens pallens mosquitoes captured from Hai’an was susceptible to malation, while those from Yandu District were moderately resistant to malation. Culex pipiens pallens mosquitoes from both Yandu and Hai’an were moderately resistant to proposur, and were resistant to DDT, beta cypermethrin and deltamethrin. Conclusions Culex quinquefasciatus, Culex pipiens pallens and Culex tritaeniorhynchus are predominant Culex species in Jiangsu Province. Culex pipiens pallens is resistant to DT, beta cypermethrin and deltamethrin in central Jiangsu Province.

Mechanical Equation Verification and Mechanical Property Analysis of the TC4 Self-Tapping Bone Screw / 医用生物力学

Objective To test the validity for mechanical equation of the TC4 self-tapping bone screw and analyze the influence of bone screw parameters on its mechanical properties. Methods In order to derive the equation of self-tapping and pull-out for bone screw, the physical model of bone screw-polyurethane foam block was built. By reference of ASTMF543-07 standard specification and test method for metallic medical bone screw, the mechanical verification tests of selected conical head shallow thread locking bone screw (HAZ) and conical head deep thread locking bone screw (HBZ) with different diameters were performed on Instron E3000 mechanical testing machine, and the data of self-tapping force, self-tapping torque and pull-out force from 5 groups of bone screws were tested respectively. Results The calculated and measured values were basically the same, except for a few points with large individual errors. The average error of the two values was 11.02%, so the theoretical calculation formula was highly credible. The bone screw with a larger diameter or a higher tooth height would require greater self-tapping force and pull-out force. Conclusions The research results provide the calculation basis for mechanical properties of bone screw and the research direction for optimization and improvement of bone screw in future.

Axial Mechanical Properties of the Posterior Spinal Pedicle Fixation System / 医用生物力学

Objective To analyze factors that affect axial mechanical performance of the posterior pedicle fixation system. Methods The mechanical model for axial mechanical properties of the posterior pedicle fixation system was established to perform mechanical analysis. By referring to the Standard YY/T 0961-2014, tests on axial ejection force and axial clamping torque of JHL-I multi-axis components, JHL-I single-axis components, JHL-V multi-axis components and JHL-V single-axis components were performed by using Instron E3000 and Instron E10000 mechanical testing machines. Results The ejection rigidity of the single-axis component of vertebral nail system was significantly higher than that of the multi-axis component of vertebral nail system; the torsion rigidity of JHL-V was higher than that of JHL-I. The type and size of the locking bolt as well as its locking torque were the main factors affecting axial ejection force of the posterior spinal pedicle fixation system; the size of the locking bolt and the diameter of the connection rod were the main factors affecting axial clamping torque of the system; axial mechanical properties of the system could be improved by increasing the diameter of the connecting rod, the coefficient of friction between each connecting element, and the pitch diameter of the locking bolt. Conclusions The research findings provide references for optimizing and improving axial mechanical properties of the posterior pedicle fixation system.