Association of Oral Health-Related Quality of Life with the Longevity of ART-Restorations in Children

ABSTRACT Objective: To evaluate the association of oral health-related quality of life (OHRQoL) with the longevity of ART-restorations in children after 18 months. Material and Methods: A longitudinal clinical study with 62 six- to seven-year-old children, both genders, 31 of whom underwent four weeks of oral health education strategy (OHES) followed by ART (GOHES+ART) and the others only ART (GART). The Brazilian short-version of the Child Perceptions Questionnaire (16-CPQ8-10) was used to evaluate the OHRQoL and the perception of change in oral health was assessed by a single question. Data was analyzed using Mann-Whitney, Wilcoxon and Friedman's tests. Results: After 18 months, GOHES+ART reported a greater impairment on OHRQoL, mainly in oral symptoms domain (p<0.05). In this period, greater impairment of oral symptoms was reported in children with failed restorations and with treatment considered to have a minor failure (p<0.05). In inter-group analysis, the GOHES+ART, with 2 to 4 restorations, Class I, of small size, located in the upper arch and with a smaller failure, reported more oral symptoms than the GART. Conclusion: In the long-term, children submitted to OHES followed by ART reported more oral symptoms. Factors such as number, class, size and location of the restorations need to be considered for the implementation of an efficient and effective oral health program, as well as for greater longevity of ART-restorations.

Risk Factors for the Incidence of Dental Caries in Low, Very Low, and Extremely Low Birth Weight Children: A Cohort Study

Abstract Objective: To assess the incidence of caries in a two-year period among low birth weight (LBW), very low birth weight (VLBW), and extremely low birth weight (ELBW) children considering socioeconomic indicators, dietary factors and oral hygiene. Material and Methods: A convenience sample was formed of 42 low birth weight children aged two to five years at baseline. Two examiners diagnosed caries using the World Health Organization criteria. Birth weight, socioeconomic indicators and diet were collected from medical records and questionnaires. Binomial models were used to estimate unadjusted and adjusted rate ratios (RR) and respective 95% confidence intervals for the factors evaluated. Results: Thirty-six children were re-examined after two years. The incidence of dental caries was 36.7%. The dmft index was 0.44 (±1.25) at baseline and increased to 1.36 (±3.85) at follow-up. VLBW children (1,000 to 1,500 g) (RR=0.23; 95%CI: 0.08-0.72) and LBW children (1,500 to 2,500 g) (RR=0.06; 0.01-0.55) had fewer carious lesions compared to ELBW children (<1,000 g). Carious lesions were more frequent among children with a lower income (RR=6.05; 1.05-34.84) and less frequent among those who did not consume sweetened juice, tea or yogurt (RR: 0.21; 0.07-0.62). Conclusion: An inverse dose-response relation was found between birth weight and the incidence of caries. A lower income and the consumption of sweetened beverages were risk factors for the development of caries (AU).

A higiene bucal de bebês edêntulos e sua influência na microbiota bucal: os profissionais de saúde devem preconizá-la? ­ revisão crítica / Oral hygiene in edentulous infants and its influence on oral microbiota: should the health professionals recommend it? ­ a critical review

Introdução: A indicação de higiene bucal em bebês edêntulos entre os profissionais de saúde ainda é controversa, sendo necessária a busca científica sobre esta indicação e a padronização da informação. Objetivo: Investigar criticamente as evidências relacionadas a indicação da higiene bucal para bebês edêntulos. Métodos: A busca de artigos foi realizada nas bases de dados PubMed, LILACS e Google Scholar, de modo a avaliar a seguinte pergunta: "A higienização da cavidade bucal de bebês edêntulos pode influenciar a microbiota bucal?". Uma busca em 8 livros de Odontopediatria também foi realizada. Resultados: Foram encontrados 317 artigos (167-PubMed, 146-Google Scholar e 4-LILACS). Não foram encontrados estudos primários que avaliaram o efeito da higiene bucal em bebês edêntulos na microbiota, impossibilitando a condução de revisão sistemática. Assim, para a revisão foram incluídos 6 estudos que investigaram micro-organismos na cavidade bucal de bebês edêntulos e o papel das imunoglobulinas salivares. Dentre os livros avaliados, somente 4 indicaram a higiene bucal em bebês edêntulos. Conclusão: Diante dos dados analisados, não existem estudos primários que avaliaram o efeito da higienização na microbiota bucal de bebês edêntulos. Torna-se relevante a condução de estudos clínicos para obtenção de evidências científicas sobre a indicação ou não da higienização da cavidade bucal de bebês edêntulos.

Introduction: The indication of oral hygiene in edentulous babies is still controversial among health professionals, being necessary the search of this recommendation and the standardization of information. Objective: To inves-tigate critically the evidence related to the indication of oral hygiene for edentulous babies. Methods: The search for articles was performed in the PubMed, LILACS and Google Scholar databases, in order to assess the following question: "Can oral cavity hygiene of edentulous babies influence oral microbiota?" A search in 8 books of Pediatric Dentistry was also performed. Results: 317 articles were found (167-PubMed, 146-Google Scholar and 4-LILACS). There were no primary studies that evalu-ated the effect of oral hygiene of edentulous infants on microbiota, which impair the conduction of a systematic review. Thus, it was included for this review six studies that investigated microorganisms in the oral cavity of edentulous infants and the role of salivary immunoglo- bulins. Among the textbooks evaluated, only 4 indicated the oral hygiene in edentulous infants. Conclusion:According to the data, there are no primary studies that assessed the effect of oral hygiene in the oral microbiota of edentulous babies. It is relevant to conduct clinical studies in order to obtain scientific evidence about the indication or no of the oral hygiene in edentulous babies

Weight-loss and surface roughness of enamel after microabrasion procedure with different agents / Perda de peso e rugosidade da superfície do esmalte após procedimento de microabrasão com diferentes agentes

Introduction: Enamel microabrasion is achieved by abrasion of the enamel surface and it is a quick, practical and efficient procedure. Objective It was assessed the weight loss and surface aspect of enamel after microabrasion procedures with commercial and mixtures made in-office. Material and method Eighty bovine incisors were divided into four groups (n=10): OpalustreTM (6.6% HCl + silicon carbide); Whiteness RMTM (6% HCl + silicon carbide); 37% H3PO4 + pumice and 10% HCl + pumice. Treatment was performed by 15 applications of 10s duration. The enamel weight loss was determined by the difference in weight before and after the microabrasion. The surfaces were analyzed by a surface roughness equipment and scanning electron microscopy. Data were submitted to paired-T test, one-way ANOVA and Tukey tests (α=0.05). Result It was observed significantly weight loss for all groups. The difference in weight loss ranged from 0.037±0.012 for group 37% H3PO4 and from 0.054±0.009 for group 6,6% HCl. There was a significant increase in surface roughness for all groups and 10% HCl group showed the lower results (0.65±0.09). It was observed different patterns of enamel morphology by SEM images. Conclusion The in-office mixtures resulted in the lowest enamel structure loss (37% H3PO4) and the lowest surface roughness (10% HCl).

Introdução: A microabrasão do esmalte é realizada através da abrasão da superfície do mesmo, apresentando-se como um procedimento rápido, prático e eficiente. Objetivo Avaliar a perda de peso e o aspecto superficial do esmalte após procedimentos de microabrasão com agentes comerciais e não comerciais. Material e método Oitenta incisivos bovinos foram divididos em quatro grupos (n = 10): OpalustreTM (6,6% HCl + carboneto de silício); Whiteness RMTM (6% HCl + carboneto de silício); 37% H3PO4 + pedra-pomes e 10% HCl + pedra-pomes. O tratamento foi realizado em 15 aplicações de 10s de duração. A perda de peso do esmalte foi determinada pela diferença de peso antes e depois da microabrasão. As superfícies foram analisadas por equipamento de rugosidade superficial e microscopia eletrônica de varredura. Os dados foram submetidos ao teste T-pareado, ANOVA one-way e teste de Tukey (α = 0,05). Resultado Foi observada perda de peso significativa para todos os grupos, a diferença na perda de peso variou de -0,037±0,012 para o grupo 37% H3PO4 a -0.054±0.009 para o grupo 6.6% HCl. Houve um aumento significativo na rugosidade da superfície para todos os grupos e o grupo 10%HCl apresentou os resultados mais baixos (0,65±0,09). Foram observados diferentes padrões de morfologia do esmalte por meio de imagens MEV. Conclusão Os agentes não comerciais resultaram na menor perda de estrutura do esmalte (37% H3PO4) e na rugosidade superficial (10% HCl).

Synthesis of a chitosan nanoparticle suspension and its protective effects against enamel demineralization after an in vitro cariogenic challenge

Abstract Objective Our study aims to synthesize, characterize, and determine the effects of a ChNPs suspension on human enamel after cariogenic challenge via pH-cycling. Methodology ChNPs were synthesized by ion gelation and characterized by Transmission Electron Microscopy (TEM) and Dynamic Light Scattering. Forty enamel blocks were divided into four groups (n=10/group): (i) ChNPs suspension; (ii) chitosan solution; (iii) 0.05% sodium fluoride (NaF) solution; and (iv) distilled water. Specimens were exposed to cariogenic challenge by cycling in demineralization solution (3 h) and then remineralized (21h) for 7 days. Before each demineralization cycle, the corresponding solutions were passively applied for 90 s. After 7 days, specimens were examined for surface roughness (Ra) and Knoop hardness (KHN) before and after the cariogenic challenge; % KHN change (variation between initial and final hardness), and surface topography by an optical profilometer. The data were analyzed by repeated-measures ANOVA, One-way ANOVA, and Tukey tests (α=0.05). Results TEM images showed small spherical particles with diameter and zeta potential values of 79.3 nm and +47.9 mV, respectively. After the challenge, all groups showed an increase in Ra and a decrease in KHN values. Optical profilometry indicated that ChNPs- and NaF-treated specimens showed uneven roughness interspersed with smooth areas and the lowest %KHN values. Conclusion The ChNPs suspension was successfully synthesized and minimized human enamel demineralization after a cariogenic challenge, showing an interesting potential for use as an oral formulation for caries prevention.

Effect of hydrochloric acid commercial presentation for microabrasion technique on loss of enamel structure and surface / Efeito da apresentação comercial de ácido clorídrico para técnica de microabrasão na perda de estrutura e superfície do esmalte

Introdução: A técnica de microabrasão pode ser realizada através de pasta pronta para uso, disponível comercialmente, ou o profissional pode manipulá-la no consultório. Objetivo: Verificar o efeito da apresentação comercial do ácido clorídrico a 10% na manipulação de pasta para microabrasão sobre a superfície do esmalte. Metodologia: Foram selecionados incisivos bovinos e divididos em dois grupos, de acordo com a apresentação comercial do ácido clorídrico (líquido ou em gel). O tratamento foi realizado através de dez aplicações com 10s de duração cada, intercaladas por lavagem de 10s. Vinte incisivos (n=10) foram utilizados para se determinar a perda de estrutura do esmalte. Cada amostra foi pesada, em balança analítica, antes e após submissão à microabrasão. Outras 20 amostras (n=10) foram utilizadas para determinação da rugosidade superficial média (Ra) utilizando-se um rugosímetro. Três amostras de cada grupo do experimento anterior foram selecionadas, aleatoriamente, e outras três amostras adicionais foram preparadas como controle (baseline) para análise em MEV. Resultados: Verificou-se diferença estatística significativa entre a massa final e a inicial e rugosidade superficial das amostras, independente da apresentação comercial do ácido. Nas imagens de MEV observou-se presença de superfície regular para o grupo controle (baseline). Nas demais imagens verificou-se superfície com considerável irregularidade e dissolução discreta do esmalte. Conclusões: O tratamento realizado causou perda significativa de estrutura e aumentou a rugosidade superficial dos espécimes, independente da apresentação comercial do ácido e sem apresentar diferença entre os grupos ao final. A apresentação comercial do ácido não parece ser um fator a interferir no tratamento. (AU)

Introduction: The microabrasion technique can be performed using a commercially available paste, or the dentist can prepare it in his office. Objective: To verify the effect of hydrochloric acid commercial presentation in the handling of microabrasion paste on the enamel surface. Methodology: Bovine incisors were divided into two groups, according to the commercial presentation of 10% hydrochloric acid (liquid or gel). The treatment was carried out through ten applications of 10 s duration each, intercalated with a 10s wash. Twenty teeth (n=10) were used to determine the loss of enamel structure. Each sample was weighed on an analytical balance before and after submission to microabrasion. Another 20 teeth (n=10) were used to determine the average surface roughness (Ra) using a rugosimeter. Three samples from each group of the previous experiment were selected, randomly, and another three additional samples were repared as a control (baseline) for SEM analysis. Results: There was a statistically significant difference between the final and initial mass and the surface roughness of the samples, regardless of the acid commercial presentation. In the SEM images, a regular surface was observed for the control group (baseline). In the other images, there was a surface with considerable irregularity and a slight dissolution of the enamel. Conclusions: The treatment carried out. (AU)

In Vitro Effect of Acidic Challenges on the Physical Properties of Dental Prosthesis Artificial Teeth

Abstract Objective: To evaluate the effect of immersion and acid challenge with cola drink on color change (ΔE), Vickers hardness (VHN) and surface roughness (Ra) of artificial acrylic resin teeth. Material and Methods: The artificial teeth were divided into 6 groups (n= 8): TC (Trilux/Control), BC (Biotone/Control), TAC (Trilux/Acid challenge), BAC (Biotone/Acid challenge), TI (Trilux/Immersion) and BI (Biotone/Immersion). The teeth were embedded in acrylic resin and the labial side was serially polished to provide appropriate flat surface. The samples of TC, BC, TI, BI groups were immersed in artificial saliva and cola drink (coke) for 7 days, respectively. The acid challenge was performed with immersion of samples in coke for 5 min, and subsequently immersion in artificial saliva for 2h. This cycle was repeated at 4 times/day, during 7 days. The tests of VHN, ΔE and Ra were analyzed before and after the challenge and immersion groups. Data was analyzed by ANOVA, Tukey and T test (α = 0.05). Results: There was no difference in Ra values between groups after treatments. However, there was a decrease in VHN for all groups. BI (19.2 ± 0.3) presented significantly lower hardness than BAC (19.5 ± 0.9) and BC (20.2 ± 0.5). Groups BI (2.18 ± 0.41) and TI (1.50 ± 0.43) had statistically higher ΔE compared to the other groups. Conclusion: The hardness of resin teeth decreased after acid challenges, but the roughness surface was not affected. The color was more affected by the times of exposure in cola beverage and remineralization in artificial saliva, which were associated to the material degradation (AU).

Os medicamentos infantis podem causar erosão na superfície de dentes decíduos? Revisão sistemática da literatura / Can child medications cause erosion on the surface of deciduous teeth? A systematic review of literature

Introdução: A erosão dentária é caracterizada por uma perda progressiva e irreversível dos tecidos dentários mineralizados que ocorre sem envolvimento bacteriano. Acredita-se que o uso frequente de medicamentos líquidos orais, em crianças, possa desenvolver erosão dentária visto que esses medicamentos apresentam, em sua maioria, pH ácido, que pode atuar como fator predisponente ao desenvolvimento da erosão dentária. Objetivo: O presente estudo avaliou os efeitos do uso de medicamentos líquidos orais na estrutura de dentes decíduos por meio de revisão sistemática da literatura. Material e Métodos: Foi realizada pesquisa de artigos científicos, em março de 2018, nas bases de dados PubMed e Web of Science utilizando descritores específicos para a pesquisa, de modo a avaliar, descritivamente, a seguinte pergunta "Os medicamentos infantis de uso contínuo podem causar erosão na superfície de dentes decíduos?" Foram encontrados 278 artigos na base de dados Pubmed e 41 na base Web of Science, dos quais 18 artigos eram coincidentes, assim 301 títulos e resumos foram lidos e analisados. Destes, 293 foram excluídos de modo que 8 artigos foram selecionados para análise crítica. Resultados: Os medicamentos líquidos de uso contínuo, geralmente utilizados para o tratamento de condições crônicas em crianças, promovem efeito erosivo sobre a estrutura dentária, principalmente quando relacionado ao pH e acidez titulável dos medicamentos, por avaliação de estudos conduzidos "in vitro". Conclusão: Torna-se necessária a realização de estudos clínicos para avaliação mais adequada do efeito erosivo de medicamentos infantis na superfície de dentes decíduos.

Introduction: Dental erosion is characterized by a progressive and irreversible loss of mineralized dental tissues that occurs without bacterial involvement. It is believed that the frequent use of oral liquid medicines in children can develop dental erosion since the majority of these medications has acidic pH, which can act as a predisposing factor for dental erosion development. Objective: The present study evaluated the effects of the use of liquid oral medications on the structure of deciduous teeth by a systematic review of literature. Material and Methods: We conducted a survey of scientific articles in PubMed and Web of Science databases on March 2018, using specific descriptors for the research, in order to evaluate descriptively the following question: "Children's medicines for continuous use may cause erosion on the surface of deciduous teeth?". We found 278 articles in the PubMed database and 41 in the Web of Science database, of which 18 articles were matched, so 301 titles and abstracts were read and analyzed. Of these, 293 were excluded. Thus, 8 articles were selected for the critical analysis. Results: Liquid medications of continuous use, generally used for the treatment of chronic conditions in children, promoted erosive effect on dental structure, especially when related to pH and titratable acidity of the drugs in in vitro studies. Conclusion:It is necessary to carry out clinical studies for a more adequate evaluation of the erosive effect of children's medicines on the surface of deciduous teeth.

TiF4 varnish protects the retention of brackets to enamel after in vitro mild erosive challenge

Abstract The effect of fluoride agents on the retention of orthodontic brackets to enamel under erosive challenge is little investigated. Objective: The aim of this study was to evaluate the effect of titanium tetrafluoride (TiF4) and sodium fluoride (NaF) agents on the shear bond strength of brackets to enamel and on the enamel microhardness around brackets under erosive challenge. Methods: Brackets were bonded to bovine incisors. Five groups were formed according to fluoride application (n=10): TiF4 varnish, TiF4 solution, NaF varnish, NaF solution and control (without application). The specimens were submitted to erosive challenge (90 s cola drink/2h artificial saliva, 4x per day for 7 days). Solutions were applied before each erosive cycle and varnishes were applied once. Vickers Microhardness (VHN) was obtained before and after all cycles of erosion and the percentage of microhardness loss was calculated. Shear bond strength, adhesive remnant index and polarized light microscopy were conducted after erosion. The data were analyzed by ANOVA, Tukey, Kruskal-Wallis and Mann-Whitney U tests (α=0.05). Results: The %VHN had no statistically significant differences among the experimental groups. However, considering the comparisons of all groups with the control group, TiF4 varnish showed the highest protection from enamel demineralization (effect size of 2.94, while the effect size for the other groups was >2.4). The TiF4 varnish group had significantly higher shear bond strength compared to other groups. There was no difference among groups for adhesive remnant index. Polarized light microscopy showed higher demineralization depth for the control group. Conclusions: Application of NaF and TiF4 agents during mild erosive challenge minimized the enamel mineral loss around brackets, however only the experimental TiF4 varnish was able to prevent the reduction of shear bond strength of brackets to enamel.

Influence of Different Dentin Substrate (Caries-Affected, Caries-Infected, Sound) on Long-Term muTBS

Abstract The aim of this study was to evaluate the μTBS in different dentin substrates and water-storage periods. Twenty-four dentin blocks obtained from sound third molars were randomly divided into 3 groups: Sound dentin (Sd), Caries-affected dentin (Ca) and Caries-infected dentin (Ci). Dentin blocks from Ca and Ci groups were subjected to artificial caries development (S. mutans biofilm). The softest carious tissue was removed using spherical drills under visual inspection with Caries Detector solution (Ca group). It was considered as Ci (softer and deeply red stained dentin) and Ca (harder and slightly red stained dentin). The Adper Single Bond 2 adhesive system was applied and Z350 composite blocks were built in all groups. Teeth were stored in deionized water for 24 h at 37 ºC and sectioned into beams (1.0 mm2 section area). The beams from each tooth were randomly divided into three storages periods: 24 h, 6 months or 1 year. Specimens were submitted to µTBS using EZ test machine at a crosshead speed of 1.0 mm/min. Failure mode was examined by SEM. Data from µTBS were submitted to split plot two-way ANOVA and Tukey’s HSD tests (a=0.05). The µTBS (MPa) of Sd (41.2) was significantly higher than Ca (32.4) and Ci (27.2), regardless of storage. Ca and Ci after 6 months and 1 year, presented similar µTBS. Mixed and adhesive failures predominated in all groups. The highest µTBS values (48.1±9.1) were found for Sd at 24 h storage. Storage of specimens decreased the µTBS values for all conditions.

Resumo O objetivo neste estudo foi avaliar a resistência de união à microtração (RUµT) de um sistema adesivo convencional (Adper Single Bond 2 - SB) em diferentes substratos dentinários e períodos de armazenagem. Vinte e quatro blocos de dentina foram obtidos de terceiros molares hígidos e separados aleatoriamente em 3 grupos (n=8): dentina sadia (Ds), dentina afetada (Da) e dentina infectada (Di). A Da e a Di foram submetidas ao desenvolvimento biológico artificial de cárie (S. mutans). O tecido cariado amolecido foi removido usando broca esférica sob inspeção visual com a solução Caries Detector (grupo Da). Considerou-se como Di a dentina amolecida e fortemente pigmentada de vermelho e como Da, a dentina hígida e levemente pigmentada de vermelho. O sistema adesivo SB foi aplicado de acordo com as recomendações do fabricante e blocos da resina composta Z350 foram construídos (6 mm de altura). O conjunto (dente/bloco de resina) foi armazenado em água deionizada por 24 horas a 37 °C. Estes foram seccionados em palitos (1,0 mm2 de área), que foram separados aleatoriamente em 3 períodos de armazenagem: 24 horas, 6 meses e 1 ano. Os palitos foram submetidos ao ensaio de resistência de união à microtração na máquina EZ teste a uma velocidade de 1,0 mm/min. Dados de RUµT foram submetidos à Análise de Variância 2 fatores em esquema de parcela subdividida e ao teste de Tukey (a=0,05). Os valores de resistência (MPa) da Ds (41,2) foram significativamente maiores do que os da Da (32,4) e Di (27,2), independente do tempo de armazenagem. Di e Da, 6 meses e 1ano, apresentaram valores similares de resistência de união. As falhas adesivas e mistas foram predominantes para todos os grupos. Em conclusão, os maiores valores de RUµT (48,1±9,1) foram verificados para a Ds e 24 h de armazenagem. A armazenagem diminuiu os valores de RUµT para todas as condições.

Is pomegranate peels infusion effective for disinfection of toothbrushes? / A infusão de cascas de romã é efetiva na desinfecção de escovas dentais?

Introduction: Methods of decontamination or sanitization of toothbrushes have been questioned. Objective: This study assessed the effectiveness of pomegranate peels infusion as a disinfectant of toothbrushes against Streptococcus mutans. Material and method: A sample of 16 schoolchildren aged between 7 and 9 years performed brushing 5 days/week, with a careful brushing once a day. After each day of brushing, the toothbrushes were washed and sprayed with one disinfectant solution. This procedure was repeated for 4 weeks using one of the different solutions per week: distilled water (G1; negative control), pomegranate (Punica granatum Linn) peels infusion (G2), 1% sodium hypochlorite (G3) and 0.12% chlorhexidine digluconate (G4). After the fifth day, toothbrushes were collected for laboratory analysis. Toothbrushes heads were subjected to agitation in saline dilution of 10–1, 10–2,10–3, and 25 μL of each dilution were seeded in mitis salivarius agar culture medium for S. mutans colony-forming unit (CFU) counting. One calibrated examiner (Kappa = 0.91) performed the CFU (mL–1 × 104) counts. Kruskal-Wallis and Dunn Multiple Comparison tests were used at a significance level of 5%. Result: G1 presented the highest number of CFU (3.9 ± 8.4), followed by G2 (3.2 ± 4.0). No S. mutans growth was observed in G3 and G4. There was no statistically significant difference between G1 and G2 and between G3 and G4 (p>0.05). Conclusion: Pomegranate infusion was completely ineffective for the disinfection of toothbrushes against S. mutans when compared with 1% sodium hypochlorite and 0.12% chlorhexidine digluconate solutions.

Introdução: Os métodos de descontaminação ou desinfecção de escovas dentais têm sido questionados. Objetivo: Este estudo avaliou a eficácia da infusão de cascas de romã como um desinfetante de escovas dentais contra Streptococcus mutans. Material e método: Uma amostra de 16 escolares com idade entre 7 e 9 anos realizou escovação dentária cuidadosa, uma vez ao dia por 5 dias/semana durante 4 semanas. Após cada dia de escovação, as escovas foram lavadas e pulverizadas com uma solução desinfetante. Este procedimento foi repetido por 4 semanas utilizando uma das diferentes soluções por semana: água destilada (G1; grupo controle), infusão de casca de romã (Punica granatum Linn) (G2), hipoclorito de sódio a 1% (G3) e digluconato de clorexidina a 0,12% (G4). Após o quinto dia, as escovas foram coletadas para análise laboratorial. As cabeças das escovas foram agitadas em solução salina diluída em 10–1, 10–2,10–3, e 25μL de cada diluição foi semeada em meio de cultura agar mitis salivarius para contagem de unidade formadora de colônias (UFC) de S. mutans. Um examinador calibrado (Kappa = 0,91) realizou a contagem de UFC mL–1 × 104. Os testes de Kruskal-Wallis e de Comparações Múltiplas de Dunn foram usados em um nível de significância de 5%. Resultado: G1 apresentou o maior número de UFC (3,9 ± 8,4), seguido de G2 (3,2 ± 4,0). Não foi observado crescimento de S. mutans em G3 e G4. Não houve diferença estatisticamente significante entre G1 e G2 e entre G3 e G4 (p>0,05). Conclusão: A infusão de romã foi completamente ineficaz para a desinfecção de escovas dentais contra S. mutans quando comparada às soluções de hipoclorito de sódio a 1% e digluconato de clorexidina a 0,12%.

Effects of erosive challenge on the morphology and surface properties of luting cements / Efeito do desafio erosivo na morfologia e propriedades de superfície de agentes cimentantes

Introduction: Few studies investigated the surface properties of luting cements after erosive challenge. Objective: To evaluate the surface roughness (Ra), Vickers hardness (VHN) and morphology of 4 luting cements after erosive challenge. Material and method: Twenty specimens of each cement were prepared (4×2mm) and divided into experimental (erosive challenge) and control (artificial saliva) groups (n=10): Rely X U200 (U200); Rely X ARC (ARC); Ketac Cem Easy Mix (Ketac) and Zinc phosphate (ZnP). The erosive challenge was performed by four daily erosive cycles (90s) in a cola drink and 2 h in artificial saliva over 7 days. Ra and VHN readings were performed before and after erosion. The percentage of hardness loss (%VHN) was obtained after erosion. The surface morphology was analyzed by scanning electron microscopy (SEM). ANOVA, Tukey and Student-T tests were used (α=0.05). Result: After erosion, all luting cements had increase in Ra values and U200 and ZnP groups had the highest %VHN. After saliva immersion, only U200 and ZnP groups had significant increases in Ra values and there were no significant differences among the groups in %VHN. SEM analysis showed that Ketac and ZnP groups had rough and porous surfaces, and U200 group had higher resin matrix degradation than ARC group. Conclusion: Erosive challenge with a cola drink affected the surface properties of all luting cements.

Introdução: Poucos estudos investigaram as propriedades de superfície de cimentos após desafio erosivo. Objetivo: Avaliar a rugosidade da superfície (Ra), dureza Vickers (VHN) e morfologia de superfície de 4 cimentos após desafio erosivo. Material e método: Vinte amostras de cada cimento foram preparadas (4×2mm) e divididas em grupo experimental (desafio erosivo) e controle (saliva artificial) (n=10): Rely X U200 (U200); Rely X ARC (ARC); Ketac Cem Easy Mix (Ketac) e Fosfato de Zinco (ZnP). O desafio erosivo foi realizado com quatro ciclos erosivos diárias (90s) em bebida à base de cola e 2h em saliva artificial durante 7 dias. As leituras de Ra e VHN foram realizadas antes e após erosão. A porcentagem de perda de dureza (%VHN) foi obtida depois da erosão. A morfologia de superfície foi analisada por microscopia eletrônica de varredura (MEV). Foram utilizados testes de ANOVA, Tukey e T-Student (α=0,05). Resultado: Após a erosão, foi observado aumento dos valores de Ra em todos os cimentos testados, e os grupos U200 e ZNP tiveram a maior %VHN. Após imersão em saliva, apenas os grupos U200 e ZnP tiveram aumento significativo nos valores de Ra e não houve diferenças significativas entre os grupos quanto à %VHN. A análise em MEV mostrou que os grupos Ketac e ZNP apresentaram superfícies rugosas e porosas, e o grupo U200 apresentou maior degradação da matriz comparado ao grupo ARC. Conclusão: O desafio erosivo com bebida a base de cola afetou as propriedades de superfície de todos os cimentos.

In vitro Effect of Erosive Challenge on Surface Microhardness of Orthodontic Composites

Objective: To evaluate in vitro the effect of erosive challenge and continuous immersion in cola drink on surface microhardness of orthodontic composites. Material and Methods: Forty samples of three composites (Transbond XT, Quick Cure and Ortho Cem) were prepared (4 x 2 mm) and distributed into 4 groups (n=10): erosive challenge, artificial saliva immersion (control 1), continuous cola immersion and artificial saliva immersion (control 2). Erosive challenge was performed 4 times per day (5 min) in cola drink for 2 h in artificial saliva for 7 days. Samples of continuous cola immersion group were soaked in cola drink for 5 weeks and the beverage was renewed every two days. Control samples were immersed in artificial saliva for 7 days (control 1) and 5 weeks (control 2). Vickers microhardness (VHN) measurements were performed before and after erosive challenge and continuous immersion. Data were evaluated by paired Student's T-test, ANOVA one-way and Tukey tests (α = 0.05). Results: After 7 days of erosive challenge, there was no statistical difference between VHN values before and after erosive challenge and artificial saliva immersion. However, after 5 weeks of cola drink and artificial saliva immersion, significant reduction in VHN values was observed for all composites when compared to baseline values, and specimens immersed in cola drink showed lower VHN compared to those immersed in saliva, regardless of composite composition. Conclusion: After 7 days of erosive challenge, there was no alteration in superficial VHN of orthodontic composites. However, after 5 weeks of immersion in cola drink, significant reduction of VHN values was observed for all composites.

Thickness and nanomechanical properties of protective layer formed by TiF4 varnish on enamel after erosion

Abstract The layer formed by fluoride compounds on tooth surface is important to protect the underlying enamel from erosion. However, there is no investigation into the properties of protective layer formed by NaF and TiF4 varnishes on eroded enamel. This study aimed to evaluate the thickness, topography, nanohardness, and elastic modulus of the protective layer formed by NaF and TiF4 varnishes on enamel after erosion using nanoindentation and atomic force microscopy (AFM). Human enamel specimens were sorted into control, NaF, and TiF4 varnish groups (n = 10). The initial nanohardness and elastic modulus values were obtained and varnishes were applied to the enamel and submitted to erosive challenge (10 cycles: 5 s cola drink/5 s artificial saliva). Thereafter, nanohardness and elastic modulus were measured. Both topography and thickness were evaluated by AFM. The data were subjected to ANOVA, Tukey's test and Student's t test (α = 0.05). After erosion, TiF4 showed a thicker protective layer compared to the NaF group and nanohardness and elastic modulus values were significantly lower than those of the control group. It was not possible to measure nanohardness and elastic modulus in the NaF group due to the thin protective layer formed. AFM showed globular deposits, which completely covered the eroded surface in the TiF4 group. After erosive challenge, the protective layer formed by TiF4 varnish showed significant properties and it was thicker than the layer formed by NaF varnish.

In vitro effects of erosive challenge on the surface properties of sealants

To assess in vitro the surface roughness (Ra), Vickers hardness (VHN) and surface morphology of resin and glass ionomer materials used for sealants after dynamic erosive challenge. Methods: Twenty specimens of each material were prepared and divided into experimental (erosive challenge) and control groups (n=10): Protect Riva (SDI), Opallis Flow (3M ESPE), Fluroshield (Dentsply), Filtek Z350 XT Flow (3M ESPE). The erosive challenge was performed 4 times per day (90 s) in cola drink and for 2 h in artificial saliva for 7 days. The control specimens were maintained in artificial saliva. Ra and VHN readings were performed before and after erosion. The percentage of hardness loss (%VHN) was obtained after erosion. The surface morphology was evaluated by scanning electron microscopy (SEM). The data were analyzed by ANOVA, Tukey and paired t tests (á=0.05). Results: After erosion and saliva immersion, there was an increase in Ra values for all groups and Riva group showed the highest Ra values. After erosive challenge, Riva and Filtek groups showed significant decrease in VHN values, but Filtek group showed the greatest %VHN. For all groups there was inorganic particle protrusion and matrix degradation after erosion visualized by SEM images. Conclusions: Erosive challenge affected the surface properties of all materials used as sealants, particularly in the Riva and Filtek groups...

Protective effect of calcium nanophosphate and CPP-ACP agents on enamel erosion

The aim of this study was to assess the effect of different remineralizing agents on enamel microhardness (KHN) and surface topography after an erosive challenge. Forty-eight human enamel specimens (4 × 4 mm) were randomly assigned to 4 groups: control (no treatment), fluoride varnish, calcium nanophosphate paste and casein phosphopeptide-amorphous calcium phosphate paste (CPP-ACP). Both pastes were applied for 5 minutes, and fluoride varnish, for 24 h. Four daily erosive cycles of 5 minutes of immersion in a cola drink and 2 h in artificial saliva were conducted for 5 days. KHN readings were performed at baseline and after 5 days. The percentage of enamel hardness change (%KHN) was obtained after erosion. The surface topography was evaluated by atomic force microscopy (AFM). The data were tested using ANOVA, Tukey's and paired-T tests (p < 0.05). After an erosive challenge, there was no statistically significant difference between the control (96.8 ± 11.4 KHN / 72.4 ± 3.0 %KHN) and the varnish (91.7 ± 14.1 KHN / 73.4 ± 5.5 %KHN) groups. The nanophosphate group showed lower enamel hardness loss (187.2 ± 27.9 / 49.0 ± 7.9 %KHN), compared with the CPP-ACP group (141.8 ± 16.5 / 60.6 ± 4.0 %KHN), and both were statistically different from the varnish and the control groups. AFM images showed a rough surface for the control and the varnish groups, a non-homogeneous layer with globular irregularities for CPP-ACP, and a thick homogeneous layer for the nanophosphate group. None of the agents provided protection against the development of erosion; however, nanophosphate paste was able to reduce enamel surface softening after the erosive challenge.

Mechanical and Biological Properties of Acrylic Resins Manipulated and Polished by Different Methods

This study evaluated the influence of the manipulation technique and polishing method on the flexural strength and cytotoxicity of acrylic resins. Two manipulation techniques and three polishing methods were used in the fabrication of acrylic plates that were divided into 6 groups (n=10). Groups MM, MC and MW: mass technique with mechanical polishing, chemical polishing and without polishing, respectively; and Groups SM, SC and SW: Saturation technique with mechanical polishing, chemical polishing and without polishing, respectively). Flexural strength was tested in a universal testing machine and the cytotoxicity assay used cell cultures (L-929) for periods of 24 h to 168 h. Flexural strength and cytotoxicity data were assessed using two-way and three-way ANOVA, respectively (α=0.05), followed by post hoc Bonferroni test for multiple comparisons. The effect of combinations of manipulation techniques and polishing methods on flexural strength showed significant differences only between Group SC and Groups MW, MM and MC (p<0.01). Cell viability ranged from 51% (3.9%) to 87,6% (3.2) in the 24-h time interval, and from 87.8% (5.0) to 95.7% (3.1%) in the 168-h time interval. With the increase of cell viability, from the third day (72 h), there was no significant difference among the groups, except between MM and SC (p<0.01) at 72 h. In conclusion, the manipulation technique and polishing method had more influence on the cytotoxicity than on flexural strength.

Este estudo avaliou a influência da técnica de manipulação e método de polimento sobre a resistência à flexão e citotoxicidade de resinas acrílicas. Duas técnicas de manipulação e três métodos de polimento foram usados na fabricação de placas de acrílico que foram divididas em 6 grupos (n=10). Grupos MM, MC e MW: técnica de massa com polimento mecânico, polimento químico e sem polimento, respectivamente; e Grupos SM, SC e SW: técnica de saturação com polimento mecânico, polimento químico e sem polimento, respectivamente. A resistência à flexão foi testada em uma máquina universal de ensaios e o ensaio de citotoxicidade foi realizada utilizando culturas de células (L929) para os períodos de 24 h a 168 h. Dados da resistência à flexão e de citotoxicidade foram avaliados usando ANOVA dois fatores e ANOVA três fatores, respectivamente (α=0,05), seguido pelo teste post hoc de Bonferroni para comparações múltiplas. O efeito das combinações de técnicas de manipulação e métodos de polimento na resistência à flexão mostraram diferenças significativas apenas entre Grupo SC e Grupos MW, MM e MC (p<0,01). A viabilidade celular variou de 51,0% (3,9%) para 87,6% (3,2%) no intervalo de tempo de 24 h, e de 87,8% (5,0%) para 95,7% (3,1%) no intervalo de tempo de 168 h. Com o aumento da viabilidade celular, a partir do terceiro dia (72 h), não houve diferença significativa entre os grupos, exceto entre MM e SC (p<0,01) em 72 h. Em conclusão, a técnica de manipulação e o método de polimento tiveram maior influência sobre a citotoxicidade do que sobre a resistência à flexão.

Fluoride Release/Uptake from Different Orthodontic Adhesives: A 30-Month Longitudinal Study

The aim of this study was to test the null hypothesis that there is no difference in fluoride release between resin-modified glass ionomer cements (RMGICs) and composites in the long term. The materials were divided into 5 groups: a nonfluoride-releasing composite - Group TXT (Transbond XT), a fluoride-releasing composite - Group QC (Quick-Cure), and three RMGICs - Groups FOLC, FOB and MC (Fuji Ortho LC, Fuji Ortho Band, and Multi-Cure). Fluoride release was measured at time intervals of 1 h, 1, 7, 14, 21 and 29 days, followed by further evaluations performed at 6, 12, 18, 24 and 30 months using selective ion electrodes connected to an ionic analyzer. Fluoride releasing and re-releasing experiments were analyzed using the Kruskal-Wallis test and Mann-Whitney test with the Bonferroni correction. The amount of fluoride released by FOB was larger in comparison with the other adhesives (p=0.01). In the long-term, FOLC and MC had a similar performance (p>0.05). The composites presented a low fluoride release, but fluoride ion uptake and re-release capacity of QC was statistically significant (p<0.05) during the experiment. In conclusion, the null hypothesis was rejected, the RMGIC Fuji Ortho Band and the composite Quick-Cure presented greater fluoride release and re-release capacity when recharged.

O objetivo deste estudo foi testar a hipótese nula de que não há nenhuma diferença de liberação de flúor entre cimentos de ionômero de vidro reforçados com resina (CIVRRs) e entre compósitos em longo prazo. Os materiais foram divididos em 5 grupos: um compósito não liberador de flúor - Grupo TXT (Transbond XT), um compósito liberador de flúor - Grupo QC (Quick-Cure), e três CIVRRs - Grupos FOLC, FOB e MC (Fuji Ortho LC, Fuji Ortho Band e Multi-Cure). A liberação de flúor foi medida em intervalos de tempo de 1 h, 1, 7, 14, 21 e 29 dias, seguido por outras avaliações realizadas aos 6, 12, 18, 24 e 30 meses, utilizando um eletrodo íon seletivo conectado a um analisador de íons. Liberação de flúor e experimentos de re-liberação foram avaliados usando o teste de Kruskal-Wallis e teste Mann-Whitney com correção de Bonferroni. A quantidade de flúor liberado pelo FOB foi maior em comparação com os outros adesivos (p=0,001). Em longo prazo, FOLC e MC demonstraram um desempenho semelhante (p>0,05). Os compósitos liberaram uma baixa quantidade de fluoreto, no entanto, a capacidade de captação do íon fluoreto e re-liberação do QC foi estatisticamente significante (p<0,05) durante o experimento. Em conclusão, a hipótese nula foi rejeitada, o CIVRR Fuji Ortho Band e o compósito Quick-Cure apresentaram maior liberação e capacidade de re-liberação de flúor quando recarregados.

Analysis by confocal laser scanning microscopy of the MDPB bactericidal effect on S. mutans biofilm CLSM analysis of MDPB bactericidal effect on biofilm

Since bacteria remain in the dentin following caries removal, restorative materials with antibacterial properties are desirable to help maintaining the residual microorganisms inactive. The adhesive system Clearfil Protect Bond (PB) contains the antibacterial monomer 12-methacryloyloxydodecylpyridinium bromide (MDPB) in its primer, which has shown antimicrobial activity. However, its bactericidal effect against biofilm on the dentin has been little investigated. Objective: The aim of this study was to analyze by confocal laser scanning microscopy (CLSM) and viable bacteria counting (CFU) the MDPB bactericidal effect against S. mutans biofilm on the dentin surface. Material and methods: Bovine dentin surfaces were obtained and subjected to S. mutans biofilm formation in BHI broth supplemented with 1% (w/v) sucrose for 18 h. Samples were divided into three groups, according to the primer application (n=3): Clearfil Protect Bond (PB), Clearfil SE Bond, which does not contain MDPB, (SE) and saline (control group). After the biofilm formation, Live/ Dead stain was applied directly to the surface of each sample. Next, 10 µL of each primer were applied on the samples during 590 s for the real-time CLSM analysis. The experiment was conducted in triplicate. The primers and saline were also applied on the other dentin samples during 20, 90, 300 and 590 s (n=9 for each group and period evaluated) and the CFU were assessed by colonies counting. Results: The results of the CLSM showed that with the Se application, although non-viable bacteria were detected at 20 s, there was no increase in their count during 590 s. In contrast, after the PB application there was a gradual increase of non-viable bacteria over 590 s. Conclusions: The quantitative analysis demonstrated a significant decrease of S. mutans CFU at 90 s PB exposure and only after 300 s of Se application. Protect Bond showed an earlier antibacterial effect than Se Bond.