ABSTRACT
Objective@#To investigate the epidemiological characteristics of suspected cases with occupational diseases and analyze the quality of occupational diseases report in Huzhou City from 2016 to 2020, so as to provide insights into supervision and early warning of occupational diseases.@*Methods@#The epidemiological data pertaining to suspected cases with occupational diseases reported in Huzhou City from 2016 to 2020 were retrieved from the Occupational Disease and Health Risk Factors Monitoring Information System of China Disease Prevention and Control Information System, including gender, age, type of job, industry category, enterprise size and diagnosis. The percentages of identification, diagnosis and definitive diagnosis were calculated, and the distribution and diagnosis of suspected cases with occupational diseases were descriptively analyzed among different regions, industry categories and enterprise sizes.@*Results@#A total of 264 398 people underwent occupational health examinations in Huzhou City from 2016 to 2020, and 322 suspected cases with occupational diseases were detected (12.18/104), including 179 cases with suspected pneumoconiosis (55.59%), 78 cases with suspected occupational ear, nose, throat and oral diseases (24.22%), 54 cases with suspected occupational poisoning (16.77%), 6 cases with suspected occupational skin diseases (1.86%), 3 cases with suspected occupational diseases caused by physical factors (0.93%) and 2 cases with other suspected respiratory diseases (0.62%). The 322 cases with suspected occupational diseases included 290 men (90.06%) and 32 women (9.94%), and had a mean age of (53.28±9.20) years. A total of 207 cases underwent occupational diseases diagnosis (64.29%), and 155 cases were definitively diagnosed with occupational diseases (74.88%). Among different counties (districts) in Huzhou City, the highest number of suspected cases with occupational diseases was reported in Changxing County (101 cases, 31.37%), with a diagnostic rate of 88.12%, and among all enterprises, the highest number of suspected cases with occupational diseases was reported in small enterprises (220 cases, 68.32%), with a diagnostic rate of 68.64%, while among all industry categories, the highest number of suspected cases with occupational diseases was reported in manufacture industry (228 cases, 70.81%), with a diagnostic rate of 56.14%. In addition, there was no suspected case with occupational diseases detected in agriculture, forestry, animal husbandry, fishery, wholesale/retail trade industry, or public administration, social security or social organizations.@*Conclusion@#Pneumoconiosis was the predominant type of suspected occupational diseases in Huzhou City from 2016 to 2020, and a low diagnostic rate was found. Improved supervision of occupational diseases control is strongly recommended among small enterprises to standardize the reporting system of suspected occupational diseases.
ABSTRACT
Objective:To investigate the efficacy of local application of methimazole cream in the patients with hyperthyroidism complicated with liver failure, and to provide reference for its clinical treatment.Methods:Two patients were admitted to hospital with jaundice as the main performance.Liver function and coagulation function supported the diagnosis of liver failure.The thyroid function indicators suggested hyperthyroidism.Combined with other related examination results, liver failure, hyperthyroidism and hepatitis B virus were diagnosed, and the local treatment of methimazole cream and other related treatments were given.Results:After treatment, the liver function of two patients returned to normal and the thyroid function was improved.After follow-up, one patient changed the external use of methimazole cream to oral treatment, and another patient was still treated in a local manner.Conclusion:There is a conflict in the treatment of hyperthyroidism complicated with liver failure.The local application of methimazole cream in the topic of reducing the risk of liver damage caused by drugs has good results in the treatment of hyperthyroidism.This method also provides the new ideas for its clinical treatment.
ABSTRACT
Objective@#To assess the occupational health risk level of a small-scale furniture manufacturer, and to explore the applicability of the Singapore-developed semi-quantitative occupational risk assessment model for chemical exposure (Singapore model) in small-scale furniture manufacturers, and to provide a basis for the continuous occupational health management of manufacturers.@*Methods@#A small-scale furniture manufacturer was selected as the study subject; an on-site occupational hygiene investigation was performed on the above manufacturer during April to June in 2017, and a risk assessment was carried out using the Singapore model.@*Results@#The assessment results of the Singapore model indicated that risk levels of occupational exposure to harmful chemicals for the key positions in the workplace were inconsistent between the actual exposure level method and the exposure index method except for the following: high risk for formaldehyde exposure (risk level: 3.5 and 4.1, respectively) during woodworking process, high risk for dimethyl benzene exposure (risk level: 3.5 and 3.5, respectively) during burnishing process, medium risk for methyl benzene and dimethyl benzene exposure (risk level: 3.0 and 3.4, respectively) as well as for dimethyl benzene exposure (risk level: 3.0 and 3.3, respectively) during primer coating process, medium risk for methyl benzene exposure (risk level: 3.0 and 3.4, respectively) during gel painting process, and medium risk for cyclohexanone exposure (risk level: 2.8 and 2.8, respectively) during oil polishing process. The exposure index method yielded a higher risk level than the actual exposure level method, especially in the risk level of benzene exposure, which was rated as "high" and "very high" by the former but "low" by the latter.@*Conclusion@#The Singapore model is suitable for risk assessment of occupational exposure to harmful chemicals in small-scale furniture manufacturers, which can provide a basis for further prevention and control measures taken by manufacturers.
ABSTRACT
Objective@#To understand the status of heat stroke in Huzhou and take preventive strategy and measures against the heat stroke.@*Methods@#Case reports between 2013 and 2017 were collected. The differents between the population and age data from different types of heat stroke were tested by F test, and the genders tested by χ2 test. The difference was statistically significant (P< 0.05) . Statistical significance by R 3.4.1.@*Results@#A total of 1 307 patients were reported from 2013 to 2017, among which 878 cases (67.18%) were mild and 429 cases (32.82%) were severe. 15 fatalities (1.15%) were from the severe heat stroke cases. Male patients (947 cases, 72.46%) were more than female ones (360 cases, 27.54%) and the difference was statistical significant (χ2=8.541, P<0.05) . Heat stroke cases in age 45~55 (25.33%) accounted for the largest proportion and the difference was statistical significant (F=8.87, P<0.05) . The cases for heat stroke have increased year by year and have obvious seasonality, mainly in June to September.@*Conclusion@#Taken together, these findings indicated that the incidence rate of heat stroke were mainly mild and middle-aged men were susceptible to heat stroke in the city. However, to decrease the numbers of heat stroke, the relevant departments should take preventive strategy and measures against the heat stroke.
ABSTRACT
OBJECTIVE: To analyze the data of occupational pneumoconiosis caused by bentonite dust. METHODS: The data of 2 cases of occupational pneumoconiosis caused by bentonite dust was retrospectively analyzed. RESULTS: Both 2 cases had a clear history of occupational exposure to bentonite dust. Case 1 has a 14 years and case 2 has 7 years of bentonite exposure history. The radiographic examination of chest X-ray in both cases showed diffuse miliary nodules with high density in both lungs. The small opacity total profusion of chest X-ray images in both cases belong to category 2. The small opacity of lung in case 1 distributed in 5 areas,while case 2 distributed in 4 areas. The pulmonary function test for case 1 showed that the forced vital capacity( FVC) was 81. 4%,the first second forced expiratory volume( FEV_1) was 76. 8%and FEV_1/FVC was 74. 4%,mild pulmonary ventilation damage; lung function test results for case 2 showed: FVC was84. 0%,FEV_1 was 90. 0%,FEV_1/FVC was 93. 0%,pulmonary ventilation function was in the normal range. Case 1 was diagnosed as occupational pneumoconiosis stage Ⅱ( bentonite); Case 2 was diagnosed as occupational pneumoconiosis stageⅠ( bentonite). CONCLUSION: The clinical symptoms and signs of occupational pneumoconiosis caused by bentonite dust are not obvious. Its diagnosis is mainly based on X-ray chest radiograph.
ABSTRACT
Artemisinin is the antidote to malaria, and has made hundreds of millions patients get rid of the disease since application in clinic. At present, the main accesses to artemisinin are directly extracted from Artemisia annua,chemical synthesis and biosynthesis. By comparing the differences of artemisinin production process between China and abroad, this research analyzes the reasons of the problem, and put forward their views and suggestions, so as to provide references for Artemisia annua further research.
ABSTRACT
This article was aimed to study the latest research progress of Tripterygium hypoglaucum, in order to pro-vide references for further research on T. hypoglaucum. CNKI Chinese Journal Full-text Database was used as data source. Bibliometric analysis was conducted on T. hypoglaucum research articles issued from 1915~2013. Bibliometric method was used in the analysis on the change trend among years, research institutes, publication dates, research per-sonnels and research topics of the articles with the built-in analysis tools and network analysis tools. The results indi-cated that T. hypoglaucum research was still in the development stage. And there is still plenty of room for growth in aspects including resources, material basis, manufacturing pharmacy and so on.
ABSTRACT
Objective To evaluate the safety, feasibility and efficacy of CT-guided percutaneous hollow screw fixation in the treatment of patients with sacroiliac complex injury. Methods Forty-five patients (at age range of 15-58 years) with sacroiliac complex injuries including 20 males and 25 females were enrolled in this study. There were 28 traffic injuries and 17 fall injuries. Fourteen patients with sacral fractures ( 15 patients with Dennis type Ⅰ fractures and nine with Dennis type Ⅱ fractures), 12 with sacroiliac joint dislocation, six with sacral fracture combined with sacroiliac joint dislocation and nine with sacroiliac joint complex injury. All patients were treated by CT-guided percutaneous hollow screw fixation. The functional exercise was performed early after operation. Results Seventy-two hollow screws were installed in 45 patients, with the operation time for 21-68 minutes ( average 37 minutes) and the operative blood loss for 30-75 ml. Of all, 38 patients were followed up for 6-26 months. According to the Majeed functional criteria, the score of the patients was 72-96 points (average 90. 3 points ), which showed that the results were excellent in 33 patients and good in two, with excellence rate of 92%. No iatrogenic nerve injury, incision infection or screw fracture were detected. Conclusion CT-guided percutaneous hollow screw fixation takes advantages of precise direction, stable fixation and safe operation and hence is one of safe and effective methods for treatment of sacroiliac complex injury.