ABSTRACT
This study explores the effect of apigenin(APG), oxymatrine(OMT), and APG+OMT on the proliferation of non-small cell lung cancer cell lines and the underlying mechanisms. Cell counting kit-8(CCK-8) assay was used to detect the vitality of A549 and NCI-H1975 cells, and colony formation assay to evaluate the colony formation ability of the cells. EdU assay was employed to examine the proliferation of NCI-H1975 cells. RT-qPCR and Western blot were performed to detect the mRNA and protein expression of PLOD2. Molecular docking was carried out to explore the direct action ability and action sites between APG/OMT and PLOD2/EGFR. Western blot was used to study the expression of related proteins in EGFR pathway. The viability of A549 and NCI-H1975 cells was inhibited by APG and APG+OMT at 20, 40, and 80 μmol·L~(-1) in a dose-dependent manner. The colony formation ability of NCI-H1975 cells was significantly suppressed by APG and APG+OMT. The mRNA and protein expression of PLOD2 was significantly inhibited by APG and APG+OMT. In addition, APG and OMT had strong binding activity with PLOD2 and EGFR. In APG and APG+OMT groups, the expression of EGFR and proteins in its downstream signaling pathways was significantly down-regulated. It is concluded that APG in combination with OMT could inhibit non-small lung cancer, and the mechanism may be related to EGFR and its downstream signaling pathways. This study lays a new theoretical basis for the clinical treatment of non-small cell lung cancer with APG in combination with OMT and provides a reference for further research on the anti-tumor mechanism of APG in combination with OMT.
Subject(s)
Humans , Carcinoma, Non-Small-Cell Lung , Lung Neoplasms , Apigenin , Molecular Docking Simulation , Alkaloids , Quinolizines , RNA, Messenger , ErbB ReceptorsABSTRACT
This study aims to investigate the impact of the invasive pest Corythucha marmorata on the growth and quality of Artemi-sia argyi. The signs of insect damage at the cultivation base of A. argyi in Huanggang, Hubei were observed. The pests were identified based on morphological and molecular evidence. The pest occurrence pattern and damage mechanism were investigated. Electron microscopy, gas chromatography-mass spectrometry(GC-MS), and high performance liquid chromatography(HPLC) were employed to analyze the microstructure, volatile oils, and flavonoid content of the pest-infested leaves. C. marmorata can cause destructive damage to A. argyi. Small decoloring spots appeared on the leaf surface at the initial stage of infestation. As the damage progressed, the spots spread along the leaf veins and aggregated into patches, causing yellowish leaves and even brownish yellow in the severely affected areas. The insect frequently appeared in summer because it thrives in hot dry conditions. After occurrence on the leaves, microscopic examination revealed that the front of the leaves gradually developed decoloring spots, with black oily stains formed by the black excrement attaching to the glandular hairs. The leaf flesh was also severely damaged, and the non-glandular hairs were broken, disor-ganized, and sticky. The content of neochlorogenic acid, cryptochlorogenic acid, isochlorogenic acids A and B, hispidulin, jaceosidin, and eupatilin at the early stage of infestation was significantly higher than that at the middle stage, and the content decreased at the last stage of infestation. The content of eucalyptol, borneol, terpinyl, and caryophyllin decreased in the moderately damaged leaves and increased in the severely damaged leaves. C. marmorata was discovered for the first time on A. argyi leaves in this study, and its prevention and control deserves special attention. The germplasm materials resistant to this pest can be used to breed C. marmorata-resis-tant A. argyi varieties.
Subject(s)
Artemisia/chemistry , Plant Breeding , Gas Chromatography-Mass Spectrometry , Oils, Volatile/analysis , Chromatography, High Pressure Liquid , Plant Leaves/chemistryABSTRACT
This study is based on ultra-high-performance liquid chromatography(UPLC), gas chromatography-mass spectrometry(GC-MS), and network pharmacology methods to analyze and predict potential quality markers(Q-markers) of Artemisiae Argyi Folium. First, UPLC and GC-MS techniques were used to analyze the content of 12 non-volatile components and 8 volatile components in the leaves of 33 Artemisia argyi germplasm resources as candidate Q-markers. Subsequently, network pharmacology was employed to construct a "component-target-pathway-efficacy" network to screen out core Q-markers, and the biological activity of the markers was validated using molecular docking. Finally, cluster analysis and principal component analysis were performed on the content of Q-markers in the 33 A. argyi germplasm resources. The results showed that 18 candidate components, 60 targets, and 185 relationships were identified, which were associated with 72 pathways related to the treatment of 11 diseases and exhibited 5 other effects. Based on the combination of freedom and component specificity, six components, including eupatilin, cineole, β-caryophyllene, dinatin, jaceosidin, and caryophyllene oxide were selected as potential Q-markers for Artemisiae Argyi Folium. According to the content of these six markers, cluster analysis divided the 33 A. argyi germplasm resources into three groups, and principal component analysis identified S14 as having the highest overall quality. This study provides a reference for exploring Q-markers of Artemisiae Argyi Folium, establishing a quality evaluation system, further studying its pharmacological mechanisms, and breeding new varieties.
Subject(s)
Molecular Docking Simulation , Network Pharmacology , Plant Breeding , Chromatography, High Pressure Liquid/methods , Gas Chromatography-Mass Spectrometry , Artemisia/chemistry , Drugs, Chinese Herbal/chemistryABSTRACT
italic>Artemisia argyi (A. argyi) is a Chinese herbal medicine in China. The main active components are volatile oils, flavonoids, and other compounds, which have various pharmacological activities. Methoxylated flavonoids are the main active ingredients in A. argyi. Flavonoid O-methyltransferase (FOMT) is a key enzyme in the O-methylation of flavonoids. In order to further understand the function and characteristics of FOMT proteins, this paper carried out the whole genome mining and identification of FOMT genes in A. argyi and performed phylogenetic, chromosomal localization, gene sequence characterization, subcellular localization prediction, protein structure, gene structure analysis, and expression pattern analysis. The results showed that a total of 83 FOMT genes were identified in the genome of A. argyi. The phylogenetic tree shows that FOMT genes are divided into two subgroups, CCoAOMT (caffeoyl CoA O-methyltransferase) subfamily (32 genes) and COMT (caffeic acid O-methyltransferase) subfamily (51 genes). Gene sequence analysis showed that the number of amino acids encoded by FOMT was 70-734 aa, the molecular weight was 25 296.55-34 241.3 Da, and the isoelectric point was 4.51-9.99. Compared with 32 members of the CCoAOMT subfamily, nearly 1/3 of the 51 members of the COMT subfamily were hydrophobic proteins and 2/3 were hydrophilic proteins. Subcellular localization prediction showed that more than 80% of CCoAOMT subfamily members were located in the cytoplasm, and 96% of COMT subfamily members were located in the chloroplast. COMT subfamily members have more motifs than CCoAOMT subfamily members. The N-terminal motifs of COMT subfamily proteins are relatively variable, while the C-terminal motifs are relatively conserved. Expression pattern analysis showed that CCoAOMT subfamily members were mainly expressed in roots, while COMT members were mainly expressed in leaves. Some FOMTs showed the tissue expression specificity by real-time quantitative PCR analysis, especially in leaves. In this study, we identified and analyzed the FOMT gene family in A. argyi, and provided a theoretical basis for further research on the function of FOMTs and the biosynthesis of methylated flavonoids in A. argyi.
ABSTRACT
The quality of moxa is an important factor affecting moxibustion therapy, and traditionally, 3-year moxa is considered optimal, although scientific data are lacking. This study focused on 1-year and 3-year moxa from Artemisia stolonifera and A. argyi(leaf-to-moxa ratio of 10∶1) as research objects. Scanning electron microscopy(SEM), Van Soest method, and simultaneous thermal analysis were used to investigate the differences in the combustion heat quality of 1-year and 3-year moxa and their influencing factors. The results showed that the combustion of A. stolonifera moxa exhibited a balanced heat release pattern. The 3-year moxa released a concentrated heat of 9 998.84 mJ·mg~(-1)(accounting for 54% of the total heat release) in the temperature range of 140-302 ℃, with a heat production efficiency of 122 mW·mg~(-1). It further released 7 512.51 mJ·mg~(-1)(accounting for 41% of the total heat release) in the temperature range of 302-519 ℃. The combustion of A. argyi moxa showed a rapid heat release pattern. The 3-year moxa released a heat of 16 695.28 mJ·mg~(-1)(accounting for 70% of the total heat release) in the temperature range of 140-311 ℃, with an instantaneous power output of 218 mW·mg~(-1). It further released 5 996.95 mJ·mg~(-1)(accounting for 25% of the total heat release) in the temperature range of 311-483 ℃. Combustion parameters such as-R_p,-R_v, D_i, C, and D_b indicated that the combustion heat quality of 3-year moxa was superior to that of 1-year moxa. It exhibited greater combustion heat, heat production efficiency, flammability, mild and sustained burning, and higher instantaneous combustion efficiency. This study utilized scientific data to demonstrate that A. stolonifera could be used as excellent moxa, and the quality of 3-year moxa surpassed that of 1-year moxa. The research results provide a scientific basis for the in-depth development of A. stolonifera moxa and the improvement of moxa quality standards.
Subject(s)
Artemisia , Hot Temperature , Moxibustion , Plant LeavesABSTRACT
This study aimed to explore the anti-inflammatory material basis and molecular mechanism of Artemisia stolonifera based on the analysis of the chemical components in different extracted fractions of A. stolonifera and their antioxidant and anti-inflammatory effects in combination with network pharmacology and molecular docking. Thirty-two chemical components were identified from A. stolonifera by ultra-performance liquid chromatography coupled to tandem quadrupole time-of-flight mass spectrometry(UPLC-Q-TOF-MS). Among them, there were 7, 21 and 22 compounds in water, n-butanol and ethyl acetate fractions, respectively. The antio-xidant capacity of different extracted fractions was evaluated by measuring their scavenging ability against 1,1-diphenyl-2-picrylhydrazyl radical 2,2-diphenyl-1-(2,4,6-trinitrophenyl) hydrazyl(DPPH) and 2,2'-azinobis-(3-ethylbenzthiazoline-6-sulphonic acid)(ABTS) free radicals and total antioxidant capacity [ferric reducing antioxidant power(FRAP) assay]. The inflammatory model of RAW264.7 cells was induced by lipopolysaccharide(LPS), and the levels of nitrite oxide(NO), tumor necrosis factor-α(TNF-α), interleukin-6(IL-6) in the supernatant and the mRNA expression of related inflammatory factors in cells were used to evaluate the anti-inflammatory effects. The results revealed that ethyl acetate fraction of A. stolonifera was the optimal antioxidant and anti-inflammatory fraction. By network pharmacology, it was found that flavonoids such as rhamnazin, eupatilin, jaceosidin, luteolin and nepetin could act on key targets such as TNF, serine/threonine protein kinase 1(AKT1), tumor protein p53(TP53), caspase-3(CASP3) and epidermal growth factor receptor(EGFR), and regulate the phosphatidylinositol-3-kinase-protein kinase B(PI3K-AKT) and mitogen-activated protein kinase(MAPK) signaling pathways to exert the anti-inflammatory effects. Molecular docking further indicated excellent binding properties between the above core components and core targets. This study preliminarily clarified the anti-inflammatory material basis and mechanism of ethyl acetate fraction of A. stolonifera, providing a basis for the follow-up clinical application of A. stolonifera and drug development.
Subject(s)
Antioxidants/chemistry , Molecular Docking Simulation , Artemisia , Network Pharmacology , Phosphatidylinositol 3-Kinases , Anti-Inflammatory Agents/chemistry , Drugs, Chinese Herbal/pharmacology , Interleukin-6ABSTRACT
The purpose of this study was to analyze the effects of shading intensity on the growth, yield, and quality of Artemisia stolonifera so as to provide references for the artificial cultivation of A. stolonifera. The seedlings of A. stolonifera with consistent growth underwent shading treatment at four shading intensity levels(0, 55%, 85%, and 95%) with different layers of black shading nets. The agronomic indexes, yield, moxa yield, total ash, quality characteristics of moxa during combustion and pyrolysis, main volatile components, flavonoids, and phenolic acids were measured. The results showed that under shading conditions, the stem diameter, leaf width, 5-leaf spacing, branch number, and yield of A. stolonifera decreased significantly, while the plant height, leaf length, leaf number, chlorophyll content, and moxa yield increased first and then decreased with the increase in shading intensity. The burning performance of moxa under natural light was better than that under moderate and severe shading conditions. The content of eucalyptol first increased and then decreased with the increase in shading intensity. The humulene content was negatively correlated with shading intensity. Other major volatile components showed no significant difference under various shading conditions. The content of neochlorogenic acid, cryptochlorogenic acid, isoschaftoside, and isochlorogenic acid B was positively correlated with shading intensity, while the content of chlorogenic acid, isochlorogenic acid A, and isochlorogenic acid C decreased first and then increased with the increase in shading intensity. To sum up, A. stolonifera is a light-loving plant, and shading can greatly reduce the yield, the content of internal components, and the burning performance of moxa. It is the main reason why A. stolonifera is mainly distributed in the forest edge, open forest, roadside, and wasteland grass in the middle and high mountains in the wild. For artificial domestication and cultivation of A. stolonifera, it is better to select plots with sufficient light.
ABSTRACT
This paper aims to compare the difference of growth and quality between wild and cultivated Artemisia stolonifera, thereby providing references for further development and utilization of A. stolonifera. The wild and cultivated A. stolonifera from different altitudes were collected, and the agronomic characters, moxa yield, volatile components, flavonoids, and phenolic acids were determined. The results showed that the cultivated species were taller and stronger, with more leaves and branches, than the wild species. The moxa yield and combustion quality of wild products were higher than those of cultivated products. The content of main volatile components in cultivated products was higher than that in wild products. The content of flavonoids and phenolic acids in wild products was higher than that in cultivated products. At high altitude, the ignition performance, combustion persistence, comprehensive combustion performance, and heat release during combustion of the wild and cultivated A. stolonifera. were optimal. At middle altitude, the content of main characteristic volatile components and flavone phenolic acids in the leaves of the cultivated and wild A. stolonifera were the highest. At low altitude, the combustion quality and the content of the above components of the cultivated A. stolonifera decrease significantly. Considering the combustion quality and the content of the internal components of the leaf lint, the middle and high altitude areas are suitable for the artificial cultivation of A. stolonifera.
Subject(s)
Artemisia , Agriculture , Flavonoids , Plant Leaves , Drugs, Chinese HerbalABSTRACT
Artemisia stolonifera is a relative of A. argyi. The two species are difficult to be distinguished due to the similarity in leaf shape and have even less distinctive features after processing. This study aims to establish a method to quickly distinguish between them. At the same time, we examined the reasonability and applicability of the specific polymerase chain reaction(PCR) method. The C/T single nucleotide polymorphism was detected at the position 202 of the sequence, based on which specific primers were designed to identify these two species. The PCR with the specific primer JNC-F and the universal primer ITS3R produced a specific band at 218 bp for A. argyi and no band for A. stolonifera, which can be used to detect at least 3% of A. argyi samples mixed in A. stolonifera samples. The PCR with the specific primer KY-F and the universal primer ITS3R produced a specific band at 218 bp for A. stolonifera and no band for A. argyi, which can be used to detect at least 5% of A. stolonifera samples mixed with A. argyi. The limit of detection of the established method was 5 ng DNA. The established PCR method can accurately distinguish between A. stolonifera and A. argyi, which provides an experimental basis for the quality control of A. stolonifera and determines whether the herbs are adulterated.
Subject(s)
Artemisia/genetics , Trichomes , Polymerase Chain Reaction , Nucleic Acid Amplification Techniques , Plant Leaves/geneticsABSTRACT
To clarify the content characteristics of mineral elements in different Artemisia argyi germplasm resources and their relationship with the quality properties of Artemisiae Argyi Folium, this study measured the content of 10 mineral elements including nitrogen(N), phosphorus(P), potassium(K), calcium(Ca), magnesium(Mg), aluminum(Al), manganese(Mn), iron(Fe), copper(Cu), and zinc(Zn) in 100 Artemisia argyi germplasm samples. Besides, their relationship with the quality properties of Artemisiae Argyi Folium was explored by correlation analysis, path analysis, and cluster analysis. The results demonstrated that the variation coefficient of the 10 mineral elements in Artemisiae Argyi Folium ranged from 12.23% to 64.38%, and the genetic diversity index from 0.97 to 3.09. The genetic diversities of N, P, and Zn were obvious. As revealed by the correlation analysis, N, P, and K showed strong positive correlations with each other. Except that Mg and Al were negatively correlated, Ca, Mg, Al, Mn, Fe, Cu, and Zn were positively correlated. The correlation analysis of mineral elements with the quality properties of Artemisiae Argyi Folium proved the significant correlations of 17 pairs of characters. According to the path analysis, P, K, Ca, and Mn greatly affected the yield of Artemisiae Argyi Folium, P, K, and Mg the output rate of moxa, N, P, and K the content of total volatile oil, P and K the content of eucalyptol, and P, K, and Ca the content of eupatilin. The 100 germplasm samples were clustered into three groups. Specifically, in cluster Ⅰ, the enrichment capacity of P, K, and Mg elements was strong, and the comprehensive properties of mineral elements were better, implying good development potential. Ca, Mn, Fe, and Zn elements in cluster Ⅱ and N and Al in cluster Ⅲ displayed strong enrichment capacities. This study has provided new ideas for resource evaluation and variety breeding of A. argyi and also reference for fertilizer application.
Subject(s)
Artemisia/genetics , Iron , Minerals/analysis , Plant Breeding , Plant Leaves/chemistryABSTRACT
In Hezhang county, Guizhou province, black spot tends to occur to Aconitum carmichaelii in the hot rainy summer, with the incidence up to 50%-70%, seriously impacting the yield and quality of the medicinal material. Thus, this study aims to clarify the pathogen and the occurrence characteristics. To be specific, the pathogen was isolated and identified according to Koch's postulates and the pathogenicity and biological characteristics were determined. In addition, the sensitivity of the pathogen to four microbial fungicides, four botanical fungicides, and five chemical fungicides was determined with the mycelium growth rate method for the purpose of screening out optimal fungicides. The pathogen was identified as Alternaria alternate, as evidenced by the similar colony morphology and microscopic characteristics and 99.55%-100% similarity in sequences of rDNA-ITS, LSU, 18S, and TEF of the two. The optimum growth conditions for A. alternata were 28 ℃, pH 8, and continuous darkness. Bacillus subtilis had strong inhibitory effect on the pathogen, and the inhibition rate was more than 90% when the concentration was 1 mg·L~(-1). In addition, difenoconazole and quinoline copper can also control the pathogen, with median effective concentration(EC_(50)) of 2.92 and 9.02 mg·L~(-1), respectively. This study lays a theoretical basis for the field control of black spot in A. carmichaelii.
Subject(s)
Aconitum , Alternaria , Fungicides, Industrial/pharmacology , MyceliumABSTRACT
In this study, in order to evaluate the phenotypic diversity of Artemisia argyi germplasm resources and improve its efficiency of cultivation and breeding, 100 accessions of A. argyi germplasm resources from 58 regions in China were collected, 20 agronomic traits and leaf phenotypic traits were observed and described. The data were used for phenotypic diversity analysis, correlation analysis, principal component analysis and cluster analysis. The result showed that the genetic diversity index of 20 traits ranged from 0.82 to 4.37, among which the largest was the base depth and the smallest was the leaf width; the coefficient of variation of the 12 quantitative traits ranged from 10.55% to 41.47%. the highest coefficient of variation was the height of dead leaves, and the smallest was the content of chlorophyll, except for the angle of branches, all the quantitative characters tended to be normal distribution. The correlation analysis showed that 28 pairs of traits had significant correlation(P<0.01), and 13 pairs had significant correlation(P<0.05). According to principal component analysis, 20 traits were simplified into 9 principal components, and the cumulative contribution rate was 73.414%, nine traits including plant height, dead leaves heigh, stem diameter, symmetry of leave base, stipule, leaf tip shape, depth of the first pair of lobes, depth of the second pair of lobes and leaf yield were selected as key indexes for evaluating agronomic traits and leaf phenotypic traits of A.argyi germplasm resources. With cluster analysis, 100 accessions of A.argyi were classified into 3 groups, the groupⅠincluded the dwarf plants with thick stem and large leaf, the groupⅡincluded high plants with wide leaf and high yield, the group Ⅲ included dwarf plants with thin stem and flat bottom shape of leaf, which could provide the basis for cultivation identification and variety breeding of A.argyi germplasm resources.
Subject(s)
Artemisia , China , Phenotype , Plant Breeding , Plant Leaves/geneticsABSTRACT
During the high-temperature and rainy season from June to October in 2017-2019,serious southern blight broke out in the Cynanchum stauntonii planting area in Tuanfeng county,Hubei province,which had a great impact on the yield and quality of medicinal materials. In this study,the pathogen of C. stauntonii was isolated,purified,and identified,and the pathogenicity was tested according to Koch's postulates. Meanwhile,the biological characteristics of the pathogen were analyzed. On this basis,the effective fungicides were screened in laboratory. Finally,the pathogen( BQ-1) was identified as Athelia rolfsii( Deuteromycotina,Basidiomycota,anamorph: Sclerotium rolfsii). The optimum growth conditions for BQ-1 were 25-30 ℃,p H 5-8,and alternating light and dark.The effective chemical fungicides were lime-sulphur-synthelic-solution( LSSS) and flusilazole,and the effective botanical fungicide was osthole. BQ-1 was highly homologous to the pathogen HS-1 of peanut southern blight,with the similarity of 18 S r DNA and TEF sequences at 99. 09%. The southern blight in C. stauntonii might be resulted from that in peanut. In the production of C. stauntonii,the following measures should be taken: avoiding rotation or neighboring with peanut,draining water from June to October to reduce humidity,and reasonably applying fungicides.
Subject(s)
Basidiomycota , Cynanchum , Fungicides, Industrial/pharmacology , HumidityABSTRACT
The basic features of glandular and non-glandular trichomes on leaves of Artemisia argyi( germplasms from Qichun,Ningbo,Tangyin,and Anguo,respectively) and related species A. stolonifera were observed by scanning electron microscopy( SEM)and compared. There were significant differences in trichome characteristics of leaves at all parts of A. argyi and A. stolonifera,which were closely related to the difference in chemical components. The length of non-glandular trichomes and size of glandular trichomes on middle leaves were the stablest. A. argyi and A. stolonifera can be distinguished by the density of glandular trichome. Additionally,the four germplasms of A. argyi can be discriminated via the density and curvature of non-glandular trichome. The density of non-glandular trichomes was the highest in A. stolonifera. For A. argyi,the germplasm from Qichun had the highest density of non-glandular trichomes on the abaxial surfaces of upper leaves and that from Ningbo had the largest non-glandular trichome curvature. With regard to the germplasm from Anguo,the T-shaped non-glandular trichomes of long stalks on the adaxial surfaces of the middle leaves were lodging-susceptible,and those with slender heads were wave-like. Statistics results of A. argyi and A. stolonifera are as follows: largest glandular trichomes on the adaxial and abaxial surfaces and highest glandular trichome density on the abaxial surfaces of the lower leaves in A. argyi germplasm from Ningbo,highest density of non-glandular trichomes on the abaxial surfaces of upper leaves in A. stolonifera,and highest density of glandular trichomes and non-glandular trichomes on the adaxial surfaces of the upper leaves in A. argyi germplasm from Qichun. According to the observation result under fluorescence microscope( FM),flavonoids were closely related to the size and density of non-glandular trichomes and size of glandular trichomes. The fluorescence intensity was the strongest and fluorescence area was the largest for flavonoids in A. argyi germplasms from Qichun and Tangyin,while the fluorescence for flavonoids was the weakest in A. stolonifera. It was the first time to observe and analyze the trichome ultrastructure of A. argyi leaves at different positions by SEM and FM. This study clarifies the differences between A. stolonifera and four famous A. argyi germplasms,which provides new evidence for the microscopic identification of A. argyi and its related species and serves as a reference for the study of the relationship of A. argyi structure with its components and functions.
Subject(s)
Artemisia , Flavonoids , Microscopy, Electron, Scanning , Plant Leaves , TrichomesABSTRACT
Volatile oil is the main effective component and an important quality indicator of Artemisia argyi leaves. In this study, 100 germplasm resources of A. argyi were collected from all the related habitats in China. The total volatile oils in A. argyi leaves were extracted by steam distillation and the content was determined by GC-MS. The result demonstrated that the content of total volatile oils was in the range of 0.53%-2.55%, with the average of 1.43%. A total of 39 chemical constituents were identified from the volatile oils, including 13 shared by the 100 germplasm resources. Clustering analysis of the 39 constituents showed that the 100 A. argyi samples were categorized into groups Ⅰ(9), Ⅱ(2), Ⅲ(66) and Ⅳ(23), and group Ⅲ had the most volatile medicinal components, with the highest content. Five principal components(PCs) were extracted from 13 shared constituents, which explained 73.454% of the total variance. PC1, PC2, and PC3 mainly reflected the pharmacological activity of volatile oils and the rest two the aroma information. The volatile oils identified in this study lay a foundation for variety breeding of and rational utilization of volatile oils in A. argyi leaves.
Subject(s)
Artemisia , Distillation , Oils, Volatile , Plant Breeding , Plant LeavesABSTRACT
In this study, 23 germplasm resources of Chrysanthemum morifolium used in medicine and tea were collected from Dabie Mountains and its surrounding producing areas, and the contents of 13 mineral elements were determined and compared. The thermal maps of correlation analysis, principal component analysis and cluster analysis were used for comprehensive evaluation. The results showed that the average content of each element in Ch. morifolium of different germplasm resources was: K>N>P>Mg>Ca>Fe>Mn>Zn>Cu>Ni>Cr>Pb>Cd, and the leaves were: K>N>Ca>Mg>P>Fe>Mn>Zn>Cr>Cu>Ni>Pb>Cd. There are rich contents of N, P, K, Ca, Mg and Fe in Ch. morifolium flowers and their leaves, among them, K element has the largest change range, while N, Ca, Fe, Mg and Zn elements have a larger change range. The absorption and accumulation of each element in the leaves of different germplasm resources varied greatly. The correlation analysis shows that there is a strong positive correlation between Ca element, Mg, Mn and Cd element.Principal component analysis in Ch. morifolium flowers characteristic elements for Mn, Cr, Cu, P, K, can be used as a Ch. morifolium resources to identify the characteristics of the elements, choose top five principal component(F1-F5) comprehensive evalua-tion of medicinal Ch. morifolium, scored in the top five varieties for Hangiu-Fuhuangju, Hangju-Xiaoyangju, Hangju-Sheyangju, Hangju-Dayanghua, Hangju-Subeiju,indicates that in terms of mineral elements, the five medicinal Ch. morifolium resources quality is better. The PCA score chart can divide 23 Ch. morifolium resources into 4 groups, and the cluster analysis heat map divides 23 Ch. morifolium resources into 5 groups. All the Ch. morifolium resources of the same type can be well clustered together, indicating that the difference in mineral element content of Ch. morifolium germplasm resources is closely related to genetic factors.
Subject(s)
Chrysanthemum/genetics , Flowers/genetics , Minerals , Plant Leaves , TeaABSTRACT
In this study, 24 copies of samples of Chrysanthemum morifolium and soil from two main production towns in Macheng city were collected, and the contents of 13 mineral elements, 5 effective components and 14 soil nutrient factors in Ch. morifolium were determined. The enrichment characteristics of available soil nutrients by mineral elements were analyzed and the dominant factors affecting the effective components of Ch. morifolium were screened. The results showed that the content of mineral elements and soil nutrients and effective components are very different, and variation of soil fertility was much greater than that of inorganic elements in chrysanthemum plants. In general, the level of element content in Ch. morifolium from different producing areas is K>N>P>Mg>Ca>Fe>Mn>Zn>Cu>Ni>Cr>Pb>Cd. The content of K, N and Mg is higher than that of common crops, and the content of Cu, Cd and Pb in Ch. morifolium from various producing areas does not exceed the relevant standards. The N, P and K enrichment capacity in soil was stronger than that of other elements, and the Ca enrichment ability was the worst. The content of AvCu in the soil was positively correlated with the contents of N, Mg, K, Fe and Cu elements in Ch. morifolium. The contents of chlorogenic acid, luteolin, 3,5-O-dicaffeoylquinic acid reached the pharmacopoeia standard. The percentage of chlorogenic acid and 3,5-O-dicaffeoylquinic acid in Ch. morifolium that from Huangtugang town in the active components were generally higher than that from Futianhe town, and the diffe-rences of luteolin contents in the two producing areas were relatively small. The correlation and regression analysis showed that the contents of Cu, Zn and Cr in Ch. morifolium were positively correlated with the active components, while the contents of Fe, Mn and Ni were negatively correlated with the contents of AvP, AvK, TK, AvMn and AvCu in soil. In general, Zn and Ca fertilizer should be added to the ecological planting of Ch. morifolium, K fertilizer should be added, and N and P fertilizer should be applied appropriately.
Subject(s)
Chrysanthemum , Fertilizers , Minerals , Nutrients , SoilABSTRACT
In order to identify the species and biological characteristics of the pathogen of southern blight from three kinds of Chinese medicine of Iridaceae(Belamcanda chinensis, Iris tectorum and I. japonica) in Dabie Mountains, the isolation, identification, pathogenicity and biological characteristics of the pathogens were studied according to Koch's postulates. In addition, 9 chemical fungicides, 3 botanical fungicides and 5 microbial fungicides were used to evaluate their inhibition to the isolates in vitro. The results showed that all the strains(SG-Q, YW-Q, and HDH-Q) isolated and purified from the diseased plants of B. chinensis, I. tectorum and I. japonica, respectively, were identified as Sclerotium rolfsii through morphological observation and sequence aligement of 18 S rDNA, rDNA-ITS and TEF. Field observations showed that the intensity of the disease incidence of three Iridaceae plants was B. chinensis>I. japonica> I. tectorum, and the pathogenicity of the strains was SG-Q>YW-Q>HDH-Q. For biological characteristics, SG-Q strain was suitable for growth under the 12 h light/12 h dark cycle, with the optimal growth temperature of 30 ℃ and pH of 5. Among the 9 tested chemical fungicides, 29% lime sulphure and 10% flusilazole had stronger inhibitory effect on mycelia growth of SG-Q. For 3 botanical fungicides, 1% osthol, 20% eugenol and 0.5% berberine could effectively inhibt the mycelial growth of SG-Q and cause the morphological variation of the pathogen. For 5 microbial fungicides, Trichoderma harzianum and Bacillus subtilis had better inhibition on the mycelium growth of SG-Q.
Subject(s)
Basidiomycota , Hypocreales , Iridaceae , MedicineABSTRACT
In order to explore the effect of different drying methods(drying-in-the-shade, sun-drying, and hot air drying) on appearance characteristics, internal structure and composition of Belamcandae Rhizoma, so as to provide a theoretical basis for screening out suitable drying methods for primary processing. In this study, the Belamcandae Rhizoma's dynamic changes of the moisture content ratio and drying rate with different drying time under different drying methods, as well as the effects of different drying methods on the appearance, drying rate, density, ash, extractives and the contents of six flavonoids(mangiferin, tectoridin, iridin, tectorigenin, irigenin, irisflorentin) were compared. The results showed that fresh Belamcandae Rhizoma consumed the longest time to reach the water balance point by traditional dry drying in the shade, whiche was about 311 h; that by sun drying was 19.3%, which was shorter than drying in the shade; both drying curves were smoother. The section color of the sun drying samples was the closest to that of fresh samples, but the interior is full of holes, with a low density and loose structure. Hot air drying(40, 60, 80 ℃) could save about 27% to 88% of the drying time, which was greatly shorter, with less pores, a larger density and compact structure. Compared with the traditional drying method, the drying rate of hot air drying was reduced by 13.7%. Ash was affected by temperature, the drying conditions under 40 ℃ and below were not significantly different from those of conventional drying. The ash content decreased by 7.73% to 18.5% compared with conventional drying at 60,80 ℃. After conventional drying and 40 ℃ hot air drying, the contents of tectoridin and iridin(glycosides) in the samples were significantly higher than those in 60,80 ℃ hot air drying, while the contents of tectorigenin, irigenin and irisflorentin(aglycones) dried at 60 ℃ were the best. Therefore, considering comprehensive appearance characteristics and content of medicinal ingredients, traditional Chinese medicinal materials after 60 ℃ hot air drying show a solid texture, tight internal structure, good appearance, appropriate reduction of toxic parasides and higher aglycone content.
Subject(s)
Desiccation , Drugs, Chinese Herbal , RhizomeABSTRACT
The research on endophytes of medicinal plants mainly relies on the traditional culture and isolation methods. Because of their functions such as promoting host growth, improving stress resistance, promoting the accumulation of medicinal active ingredients or directly producing medicinal active ingredients, the endophytes of medicinal plants have gradually attracted wide attention. However, it was found that the strains isolated by traditional methods were not the true dominant endophytes of medicinal plants by comparing the results of traditional culture isolation with high-throughput sequencing. The blind and random nature of traditional methods leads to the lack of standards in terms of medium selection, culture time and interaction between species. On the contrary, high-throughput sequencing technology is an emerging molecular biology technology developed in recent decades. Due to its high resolution level and indepen-dent culture, it can be used for thorough analysis of the community structure and diversity of environmental microorganisms. Therefore, we proposed the strategy of using high-throughput sequencing technology to guide the traditional culture and isolation of endophytes from medicinal plants. Firstly, the endophytic structure and diversity of medicinal plants were completely clear by high-throughput sequencing technology, and the dominant endophytes of the host were unequivocal. Then according to the characteristics of each dominant endophytes design or query suitable medium for its growth to culture and isolation. Finally, the function of the isolates was studied. This method can prevent researchers from missing out on the important functional strains of the host, expand the research scope of endophytes of medicinal plants, and facilitate the in-depth excavation and utilization of endophytes of medicinal plants.