Differences in mandibular condyle and glenoid fossa morphology in relation to vertical and sagittal skeletal patterns: A cone-beam computed tomography study / 대한치과교정학회지

Objective@#This study aimed to evaluate the following null hypothesis: there are no differences in the morphology of the temporomandibular joint (TMJ) structures in relation to vertical and sagittal cephalometric patterns. @*Methods@#This retrospective study was performed with 131 participants showing no TMJ symptoms. The participants were divided into Class I, II, and III groups on the basis of their sagittal cephalometric relationships and into hyperdivergent, normodivergent, and hypodivergent groups on the basis of their vertical cephalometric relationships. The following measurements were performed using cone-beam computed tomography images and compared among the groups: condylar volume, condylar size (width, length, and height), fossa size (length and height), and condyle-to-fossa joint spaces at the anterior, superior, and posterior condylar poles. @*Results@#The null hypothesis was rejected. The Class III group showed larger values for condylar width, condylar height, and fossa height than the Class II group (p < 0.05). Condylar volume and superior joint space in the hyperdivergent group were significantly smaller than those in the other two vertical groups (p < 0.001), whereas fossa length and height were significantly larger in the hyperdivergent group than in the other groups (p < 0.01). The hypodivergent group showed a greater condylar width than the hyperdivergent group (p < 0.01). The sagittal and vertical cephalometric patterns showed statistically significant interactions for fossa length and height. @*Conclusions@#TMJ morphology differed across diverse skeletal cephalometric patterns. The fossa length and height were affected by the interactions of the vertical and sagittal skeletal patterns.

Differences in mandibular condyle and glenoid fossa morphology in relation to vertical and sagittal skeletal patterns: A cone-beam computed tomography study / 대한치과교정학회지

Objective@#This study aimed to evaluate the following null hypothesis: there are no differences in the morphology of the temporomandibular joint (TMJ) structures in relation to vertical and sagittal cephalometric patterns. @*Methods@#This retrospective study was performed with 131 participants showing no TMJ symptoms. The participants were divided into Class I, II, and III groups on the basis of their sagittal cephalometric relationships and into hyperdivergent, normodivergent, and hypodivergent groups on the basis of their vertical cephalometric relationships. The following measurements were performed using cone-beam computed tomography images and compared among the groups: condylar volume, condylar size (width, length, and height), fossa size (length and height), and condyle-to-fossa joint spaces at the anterior, superior, and posterior condylar poles. @*Results@#The null hypothesis was rejected. The Class III group showed larger values for condylar width, condylar height, and fossa height than the Class II group (p < 0.05). Condylar volume and superior joint space in the hyperdivergent group were significantly smaller than those in the other two vertical groups (p < 0.001), whereas fossa length and height were significantly larger in the hyperdivergent group than in the other groups (p < 0.01). The hypodivergent group showed a greater condylar width than the hyperdivergent group (p < 0.01). The sagittal and vertical cephalometric patterns showed statistically significant interactions for fossa length and height. @*Conclusions@#TMJ morphology differed across diverse skeletal cephalometric patterns. The fossa length and height were affected by the interactions of the vertical and sagittal skeletal patterns.

Stability of bimaxillary surgery involving intraoral vertical ramus osteotomy with or without presurgical miniscrew-assisted rapid palatal expansion in adult patients with skeletal Class III malocclusion / 대한치과교정학회지

Objective@#The aim of this study was to evaluate the stability of bimaxillary surgery involving bilateral intraoral vertical ramus osteotomy performed with or without presurgical miniscrew-assisted rapid palatal expansion (MARPE) in adult patients with skeletal Class III malocclusion. @*Methods@#A total of 40 adult patients with skeletal Class III malocclusion were retrospectively divided into two groups (n = 20 each) according to the use of MARPE for the correction of transverse maxillomandibular discrepancy during presurgical orthodontic treatment. Serial lateral cephalograms and dental casts were analyzed until 6 months after surgery. @*Results@#Before presurgical orthodontic treatment, there was no significant differences in terms of sex and age between groups. However, the difference of approximately 3.1 mm in the maxillomandibular intermolar width was statistically significant (p < 0.001). Two days after surgery, the mandible had moved backward and upward without any significant intergroup difference. Six months after surgery, the maxillary intercanine (2.7 ± 2.1 mm), interpremolar (3.6 ± 2.4 mm), and intermolar (2.0 ± 1.3 mm) arch widths were significantly increased (p < 0.001) relative to the values before presurgical orthodontic treatment in the MARPE group; these widths were maintained or decreased in the control group. However, there was no significant difference in surgical changes and the postsurgical stability between the two groups. No significant correlations existed between the amount of maxillary expansion and postsurgical mandibular movement. @*Conclusions@#MARPE is useful for stable and nonsurgical expansion of the maxilla in adult patients with skeletal Class III malocclusion who are scheduled for bimaxillary surgery.

Positional changes in the mandibular proximal segment after intraoral vertical ramus osteotomy:Surgery-first approach versus conventional approach / 대한치과교정학회지

Objective@#To compare postoperative positional changes in the mandibular proximal segment between the conventional orthognathic surgery (CS) and the surgery-first approach (SF) using intraoral vertical ramus osteotomy (IVRO) in patients with Class III malocclusion. @*Methods@#Thirty-eight patients with skeletal Class III malocclusion who underwent bimaxillary surgery were divided into two groups according to the use of preoperative orthodontic treatment: CS group (n = 18) and SF group (n = 20). Skeletal changes in both groups were measured using computed tomography before (T0), 2 days after (T1), and 1 year after (T2) the surgery. Three-dimensional (3D) angular changes in the mandibular proximal segment, condylar position, and maxillomandibular landmarks were assessed. @*Results@#The mean amounts of mandibular setback and maxillary posterior impaction were similar in both groups. At T2, the posterior portion of the mandible moved upward in both groups. In the SF group, the anterior portion of the mandible moved upward by a mean distance of 0.9 ± 1.0 mm, which was statistically significant (p < 0.001). There were significant between-group differences in occlusal changes (p < 0.001) as well as in overjet and overbite.However, there were no significant between-group differences in proximal segment variables. Conclusions: Despite postoperative occlusal changes, positional changes in the mandibular proximal segment and the position of the condyles were similar between CS and SF, which suggested that SF using IVRO achieved satisfactory postoperative stability. If active physiotherapy is conducted, the proximal segment can be adapted in the physiological position regardless of the occlusal changes.

Comprehensive orthodontic treatment of a young girl with an odontogenic keratocyst and impacted teeth in the mandible / 대한치과교정학회지

Odontogenic keratocysts (OKCs) are one of the most aggressive cysts in the oral and maxillofacial area because of their high recurrence rate and infiltrative behavior. In growing patients with OKCs, a radical treatment approach might cause numerous complications, including the disturbance of jaw growth and loss of the involved tooth. This case report describes successful comprehensive orthodontic treatment combined with marsupialization of the cyst in a young girl who exhibited an OKC with impacted teeth. The 10-year-old girl presented with an OKC extending from the mandibular symphysis through the left mandibular body, with ectopic impaction of the mandibular left canine and first premolar, as well as congenitally missing bilateral mandibular second premolars. Interestingly, spontaneous improvement of the positions of the ectopic impacted teeth, along with a reduction in the size of the cyst, occurred during marsupialization. The sequential use of removable and fixed appliances enabled orthodontic traction of the impacted teeth. The treatment outcome was stable at 2.5 years after the end of the treatment. We speculate that comprehensive orthodontic treatment combined with marsupialization can be an effective treatment strategy for patients with OKCs, especially when they are encountered in young, growing patients with impacted teeth.

Comprehensive Orthodontic Treatment in a Middle-Aged Patient with Missing Maxillary Left First Premolar: A Case Report

As the adult population continues to increase, orthodontic treatment for adult patients is becoming more common. This case report describes comprehensive orthodontic treatment of a middle-aged patient with closure of the extraction space without prosthetic restoration. A 55-year-old woman with her maxillary left first premolar extracted because of a periodontal problem, wanted to close the space with orthodontic treatment. Since she had generalized crowding and mild skeletal discrepancy, we planned comprehensive orthodontic treatment, including closure of the extraction space by protraction of the left maxillary molars using miniscrews and aesthetic alignment of anterior teeth. The total treatment period was 28 months. As a result of these treatments, the extraction space was successfully closed, good tooth alignment and satisfactory occlusion were achieved.

Repeated injections of botulinum toxin into the masseter muscle induce bony changes in human adults: A longitudinal study / 대한치과교정학회지

OBJECTIVE: To evaluate soft- and hard-tissue changes in the mandibular angle area after the administration of botulinum toxin type A (BoNT-A) injection to patients with masseteric hypertrophy by using three-dimensional cone-beam computed tomography (3D-CBCT). METHODS: Twenty volunteers were randomly divided into two groups of 10 patients. Patients in group I received a single BoNT-A injection in both masseter muscles, while those in group II received two BoNT-A injections in each masseter muscle, with the second injection being administered 4 months after the first one. In both groups, 3D-CBCT was performed before the first injection and 6 months after the first injection. RESULTS: Masseter muscle thicknesses and cross-sectional areas were significantly reduced in both groups, but the reductions were significantly more substantial in group II than in group I. The intergonial width of the mandibular angle area did not change significantly in either group. However, the bone volume of the mandibular gonial angle area was more significantly reduced in group II than in group I. CONCLUSIONS: The repeated administration of BoNT-A injections may induce bone volume changes in the mandibular angle area.

Effects of bodily retraction of mandibular incisors versus mandibular setback surgery on pharyngeal airway space: A comparative study / 대한치과교정학회지

OBJECTIVE: The purpose of this study was to compare the changes induced in the pharyngeal airway space by orthodontic treatment with bodily retraction of the mandibular incisors and mandibular setback surgery without extraction. METHODS: This retrospective study included 63 adult patients (32 men and 31 women). Thirty-three patients who had been treated via four-bicuspid extraction and bodily retraction of the mandibular incisors (incisor retraction, IR group) were compared with 30 patients who had been treated via mandibular setback surgery (MS group) without extraction. Lateral cephalograms were acquired and analyzed before (T1) and after treatment (T2). RESULTS: The superior pharyngeal airway space did not change significantly in either group during treatment. The middle pharyngeal airway space decreased by 1.15 ± 1.17 mm and 1.25 ± 1.35 mm after treatment in the IR and MS groups, respectively, and the decrease was comparable between the two groups. In the MS group, the inferior pharyngeal airway space (E-IPW) decreased by 0.88 ± 1.67 mm after treatment (p < 0.01). The E-IPW was larger in the MS group than in IR group at T1, but it did not differ significantly between the two groups at T2. No significant correlation was observed between changes in the pharyngeal airway space and the skeletal and dental variables in each group. CONCLUSIONS: The middle pharyngeal airway space decreased because of the posterior displacement of the mandibular incisors and/or the mandibular body. The E-IPW decreased only in the MS group because of the posterior displacement of only the mandibular body.

Evaluation of stability after pre-orthodontic orthognathic surgery using cone-beam computed tomography: A comparison with conventional treatment / 대한치과교정학회지

OBJECTIVE: The aim of this study was to evaluate the skeletal and dental changes after intraoral vertical ramus osteotomy (IVRO) with and without presurgical orthodontics by using cone-beam computed tomography (CBCT). METHODS: This retrospective cohort study included 24 patients (mean age, 22.1 years) with skeletal Class III malocclusion who underwent bimaxillary surgery with IVRO. The patients were divided into the preorthodontic orthognathic surgery (POGS) group (n = 12) and conventional surgery (CS) group (n = 12). CBCT images acquired preoperatively, 1 month after surgery, and 1 year after surgery were analyzed to compare the intergroup differences in postoperative three-dimensional movements of the maxillary and mandibular landmarks and the changes in lateral cephalometric variables. RESULTS: Baseline demographics (sex and age) were similar between the two groups (6 men and 6 women in each group). During the postsurgical period, the POGS group showed more significant upward movement of the mandible (p < 0.05) than did the CS group. Neither group showed significant transverse movement of any of the skeletal landmarks. Moreover, none of the dental and skeletal variables showed significant intergroup differences 1 year after surgery. CONCLUSIONS: Compared with CS, POGS with IVRO resulted in significantly different postsurgical skeletal movement in the mandible. Although both groups showed similar skeletal and dental outcomes at 1 year after surgery, upward movement of the mandible during the postsurgical period should be considered to ensure a more reliable outcome after POGS.

Five-year investigation of a large orthodontic patient population at a dental hospital in South Korea / 대한치과교정학회지

OBJECTIVE: The purpose of this study was to investigate the characteristics of orthodontic patients at Yonsei Dental Hospital from 2008 to 2012. METHODS: We evaluated Angle's classification from molar relationships, classification of skeletal malocclusion from the A point-nasion-B point angle, facial asymmetry, and temporomandibular joint disorders (TMDs) from the records of 7,476 patients who received an orthodontic diagnosis. The orthognathic surgery rate, extraction rate, and extraction sites were determined from the records of 4,861 treated patients. RESULTS: The patient number increased until 2010 and gradually decreased thereafter. Most patients were aged 19-39 years, with a gradual increase in patients aged ≥ 40 years. Angle's Class I, Class II divisions 1 and 2, and Class III malocclusions were observed in 27.7%, 25.6%, 10.6%, and 36.1% patients, respectively, with a gradual decrease in the frequency of Class I malocclusion. The proportion of patients with skeletal Class I, Class II, and Class III malocclusions was 34.3%, 34.3%, and 31.4%, respectively, while the prevalence of facial asymmetry and TMDs was 11.0% and 24.9%, respectively. The orthognathic surgery rate was 18.5%, with 70% surgical patients exhibiting skeletal Class III malocclusion. The overall extraction rate among nonsurgical patients was 35.4%, and the maxillary and mandibular first premolars were the most commonly extracted teeth. CONCLUSIONS: The most noticeable changes over time included a decrease in the patient number after 2010, an increase in the average patient age, and a decrease in the frequency of Angle's Class I malocclusion. Our results suggest that periodic characterization is necessary to meet the changing demands of orthodontic patients.

Continuing to make leaps and bounds / 대한치과교정학회지

No abstract available.

Lip and perioral soft tissue changes after bracket bonding using 3-D laser scanner / 대한치과교정학회지

OBJECTIVE: The aim of this study was to evaluate the lip and perioral soft tissue changes after bracket bonding. METHODS: The soft tissue changes in 45 adult patients (age greater than 18 years and less than 29 years) without severe skeletal discrepancy were evaluated using three-dimensional images acquired with a laser scanner before and after bracket bonding was performed using 4 types of labial orthodontic brackets. RESULTS: Among the statistically significant changes in distance observed for the landmarks, the biggest change was observed in forward movement. The landmarks on the lateral sides also showed significant changes. While the landmarks on the upper lip showed significant upward movement, those on the lower lip showed significant downward movement. However, the changes were smaller for the landmarks on the upper lip (average, 0.87 mm) than for the landmarks on the lower lip (average, 1.21 mm). The type of bracket used did not significantly affect the soft tissue changes. CONCLUSIONS: These findings will help predict soft tissue changes after bracket bonding for orthodontic treatment.

The structural change in the hyoid bone and upper airway after orthognathic surgery for skeletal class III anterior open bite patients using 3-dimensional computed tomography / 대한치과교정학회지

OBJECTIVE: The purpose of this study was to investigate the structural changes of the hyoid bone and upper airway after orthognathic surgery for skeletal class III anterior open bite patients, and make comparisons with normal occlusion. METHODS: Pre- and post-operative computed tomography (CT) examinations were performed on 12 skeletal class III anterior open bite patients who were treated with mandibular setback osteotomy. Using the V-works 4.0(TM) program, 3-dimensional images of the total skull, mandible, hyoid bone, and upper airway were evaluated. RESULTS: In the Class III openbite group, the hyoid bone were all positioned anteriorly, compared to the Normal group (p < 0.05). The angle between the hyoid plane and mandibular plane in the Class III openbite group before surgery was greater than in the Normal group (p < 0.05), and the difference increased after surgery (p < 0.01). In the Class III openbite group, the volume of the upper airway decreased after surgery (p < 0.001) and the volume of the upper airway was smaller than the Normal group before and after surgery (p < 0.001). CONCLUSIONS: The narrow upper airway space in skeletal Class III openbite patients decreased after mandibular setback osteotomy. This may affect the post-surgical stability.

Analysis of masseter muscle in facial asymmetry before and after orthognathic surgery using 3-dimensional computed tomography / 대한치과교정학회지

OBJECTIVE: The purpose of this study was to understand the differences in masseter muscle (MM) between the shifted and non-shifted sides in facial asymmetry patients, and the changes shown by MM after mandibular surgery. METHODS: Pre- and post-operative CT scans were performed on 12 Class III patients with facial asymmetry who were treated by intraoral vertical ramus osteotomy and 10 subjects with normal occlusion. Using the V-works 4.0 program (Cybermed, Seoul, Korea), 3-dimensional images of the mandible, and MM were reconstructed, and evaluated. RESULTS: In the asymmetry group, the MM angle between the shifted and non-shifted sides was only significantly different (p < 0.05). Compared with normal occlusion, the asymmetry group showed a significantly smaller volume and maximum cross-sectional area in both sides of MM (p < 0.05). After mandibular surgery, the angle of MM (p < 0.01) and differences in angle between the shifted and non-shifted sides of MM (p < 0.05) were significantly decreased. The thickness in the maximum cross-sectional area was significantly increased (p < 0.01). After surgery, MM in facial asymmetry patients was similarly changed to those in the normal occlusion group except for widths. CONCLUSIONS: MM in facial asymmetry was definitely different from those in normal occlusion. However, this study suggests that MM changed symmetrically in conjunction with the mandible after proper mandibular surgery.

Craniofacial morphologic alteration induced by bone-targeted mutants of FGFR2 causing Apert and Crouzon syndrome / 대한치과교정학회지

OBJECTIVE: Activating mutations in the fibroblast growth factor receptor-2 (FGFR2) have been shown to cause syndromic craniosynostosis such as Apert and Crouzon syndromes. The purpose of this pilot study was to investigate the resultant phenotypes induced by the two distinctive bone-targeted gene constructs of FGFR2, Pro253Arg and Cys278Phe, corresponding to human Apert and Crouzon syndromes respectively. METHODS: Wild type and a transgenic mouse model with normal FGFR2 were used as controls to examine the validity of the microinjection. Micro-CT and morphometric analysis on the skull revealed the following results. RESULTS: Both Apert and Crouzon mutants of FGFR2 induced fusion of calvarial sutures and anteroposteriorly constricted facial dimension, with anterior crossbite present only in Apert mice. Apert mice differed from Crouzon mice and transgenic mice with normal FGFR2 in the anterior cranial base flexure and calvarial flexure angle which implies a possible difference in the pathogenesis of the two mutations. In contrast, the transgenic mice with normal FGFR2 displayed normal craniofacial phenotype. CONCLUSION: Apert and Crouzon mutations appear to lead to genotype-specific phenotypes, possibly causing the distinctive sites and sequence of synostosis in the calvaria and cranial base. The exact function of the altered FGFR2 at each suture needs further investigation.

A proposal of soft tissue landmarks for craniofacial analysis using three-dimensional laser scan imaging / 대한치과교정학회지

Three-dimensional (3-D) laser scans can provide a 3-D image of the face and it is efficient in examining specific structures of the craniofacial soft tissues. Due to the increasing concerns with the soft tissues and expansion of the treatment range, a need for 3-D soft tissue analysis has become urgent. Therefore, the purpose of this study was to evaluate the scanning error of the Vivid 900 (Minolta, Tokyo, Japan) 3-D laser scanner and Rapidform program (Inus Technology Inc., Seoul, Korea) and to evaluate the mean error and the magnification percentage of the image obtained from 3-D laser scans. In addition, soft tissue landmarks that are easy to designate and reproduce in 3-D images of normal, Class II and Class III malocclusion patients were obtained. The conclusions are as follows; scanning errors of the Vivid 900 3-D laser scanner using a manikin were 0.16 mm in the X axis, 0.15 mm in the Y axis, and 0.15 mm in the Z axis. In the comparison of actual measurements from the manikin and the 3-D image obtained from the Rapidform program, the mean error was 0.37 mm and the magnification was 0.66%. Except for the right soft tissue gonion from the 3-D image, errors of all soft tissue landmarks were within 2.0 mm. Glabella, soft tissue nasion, endocanthion, exocanthion, pronasale, subnasale, nasal alare, upper lip point, cheilion, lower lip point, soft tissue B point, soft tissue pogonion, soft tissue menton and preaurale had especially small errors. Therefore, the Rapidform program can be considered a clinically efficient tool to produce and measure 3-D images. The soft tissue landmarks proposed above are mostly anatomically important points which are also easily reproducible. These landmarks can be beneficial in 3-D diagnosis and analysis.

A study of facial soft tissue of Korean adults with normal occlusion using a three-dimensional laser scanner / 대한치과교정학회지

Developments in computer technology have made possible the 3-dimensional (3-D) evaluation of hard and soft tissues in orthodontic diagnosis, treatment planning and post-treatment results. In this study, Korean adults with normal occlusion (male 30, female 30) were scanned by a 3-D laser scanner, then 3-D facial images formed by the Rapidform 2004 program (Inus Technology Inc., Seoul, Korea.). Reference planes in the facial soft tissue 3-D images were established and a 3-D coordinate system (X axis-left/right, Y axis-superior/inferior, Z axis-anterior/posterior) was established by using the soft tissue nasion as the zero point. Twenty-nine measurement points were established on the 3-D image and 43 linear measurements, 8 angular measurements, 29 linear distance ratios were obtained. The results are as follows; there were significant differences between males and females in the nasofrontal angle (male: 142 degrees, female: 147 degrees) and transverse nasal prominence (male: 112 degrees, female: 116 degrees) (p < 0.05). The transverse upper lip prominence was 107 degrees in males, 106 degrees in females and the transverse mandibular prominence was 76 degrees in both males and females. Li-Me' was 0.4 times the length of Go-Me' (mandibular body length) and the mouth height was also 0.4 times the width of the mouth width. The linear distance ratio from the coronal reference plane of FT, Zy, Pn, ULPm, Li, Me' was -1/-1/1/0.5/0.5/-0.6 respectively. The 3-D facial model of Korean adults with normal occlusion were be constructed using coordinate values and linear measurement values. These data may be used as a reference in 3-D diagnosis and treatment planning for malocclusion and dentofacial deformity patients and applied for 3-D analysis of facial soft tissue changes before and after orthodontic treatment and orthognathic surgery.

Facial soft tissue measuring analysis of normal occlusion using three-dimensional CT imaging / 대한치과교정학회지

Studies for diagnostic analysis using three-dimensional (3D) CT images are recently in progress and needs for 3D craniofacial analysis are increasing in the fields of orthodontics. It is especially essential to analyze the facial soft tissue after orthodontic treatment and orthognathic surgery. In this study 3D CT images of adults with normal occlusion were taken to analyze the facial soft tissue. Norms were obtained from CT images of adults with normal occlusion (12 males, 11 females) using a computer program named V works 4.0 program. 3D coordinate planes were established using soft tissue Nasion as the reference point and a total of 20 reproducible landmarks of facial soft tissue were obtained using the multiple reconstructive sectional images (axial, sagittal and coronal images) of the V works 4.0 program; soft tissue Nasion, Pronasale, Subnasale, Upper lip center, Lower lip center, soft tissue B, soft tissue Pogonion, soft tissue Menton, Endocanthion (Rt/Lt), Alare lateralis (Rt/Lt), Cheilion (Rt/Lt), soft tissue Gonion (Rt/Lt), Tragus (Rt/Lt), and Zygomatic point (Rt/Lt). According to the established landmarks and measuring method, the 3D CT images of adults with normal occlusion were measured and the normal positional measurements and their Net (sigma=root(x2 + y2 + z2)) values were obtained using V surgery program. In the linear measurement between landmarks, there was a significant difference between males and females except Na'-Sn and En(Rt)-En(Lt). The normal ranges of Na'-Zy, Na'-Ch and Na'-Go' (facial depth) were obtained, which was difficult to measure by two-dimensional (2D) cephalometric analysis and facial photographs. These data may be used as references for 3D diagnosis and treatment planning for patients with malocclusion and dentofacial deformity.

Analysis of the hereditary factor in craniofacial morphology and fingerprints in Class III malocclusion / 대한치과교정학회지

In growing patients with Class III malocclusion, the various patterns of maxillofacial growth are a key element that affects the success or failure of treatment. Therefore it is important to correctly predict maxillofacial growth before initiating treatment. The purpose of this study was to find out the correlation between the maxillofacial morphology of parents and their Class III children by analyzing lateral cephalograms and hereditary factors. Among Class III preadolescent children, 50 families were obtained. To find out the specific hereditary factors involved, fingerprints were obtained and genetic correlation with the maxillofacial morphology was analyzed. The following conclusions were made. 1. A significant correlation (P<0.05-0.001) was found in many of the cephalometric measurements between the offspring and their parents. The correlation in the skeleton measurements was higher than in the denture measurements. The father-offspring correlation was higher than the mother-offspring correlation 2. A significant correlation (P<0.05-0.001) was found in fingerprint units between the offspring and their parents. The mother-offspring correlation was higher than the father-offspring correlation. 3. Between the maxillofacial morphology and fingerprint units, there was significant genetic correlation (P<0.05-0.01). Based on the analysis of genetic correlation, higher correlation was found in the parent-son pairing than the parent-daughter pairing.

Relationship of dental crowding to tooth size and arch width / 대한치과교정학회지

The purpose of the present study was to investigate the relationship of dental crowding to tooth size and arch dimension in Korean subjects. Two groups of dental casts with Class I molar relationship, were selected on the basis of crowding. One group, consisting of 82 pairs of study cast (29 males and 53 females), exhibited at least 7 millimeters of crowding in each arch. A second group, consisting of 82 sets of study cast (37 males and 45 females), exhibited normal occlusion with little or no crowding. Mesiodistal tooth diameters, and buccal and lingual dental arch widths were measured and compared between the crowding and normal occlusion groups. Significant differences were observed between the two groups not only in arch widths but also in tooth sizes. The results of the present study suggest that both etraction and expansion can be used as a treatment approach for the crowding cases.