ABSTRACT
Background Shoemaking industry workers are prone to work-related musculoskeletal disorders (WMSDs) due to long-term awkward postures during the work process. There is little research on the prevalence and influencing factors of WMSDs in the knee region of this industry, and it should be taken seriously. Objective To estimate the prevalence of work-related knee pain among shoemaking workers and analyze the related influencing factors. Methods A total of 6982 shoemaking workers were selected from 26 shoemaking factories in Guangdong, Hubei, Fujian, Chongqing, Shandong, Zhejiang, and Jingxi by convenience sampling. Prevalence of work-related knee pain in past year, demographic characteristics, occupational related factors, and work posture were collected by a cross-sectional survey using the electronic version of Musculoskeletal Disorder Questionnaire. Logistic regression analysis was used to analyze the influencing factors that may lead to work-related knee pain. Results This survey collected 6982 valid questionnaires with a recovery rate of 98.3%. The prevalence of work-related knee pain of shoemaking workers in the past 12 months was 13.0% (908/6982). According to the results of logistic regression analysis, compared with workers with less than 5 years of service, workers with 5-10 years of service (OR=1.21, 95%CI: 1.02, 1.45) and more than 10 years (1.53, 95%CI: 1.27, 1.83) showed a higher risk of knee WMSDs; sometimes, often and very frequent (reference : rarely or never) long-term standing (OR=1.33, 95%CI: 1.08, 1.64; OR=2.67, 95%CI: 2.10, 3.39; OR=2.75, 95%CI: 2.08, 3.63) and sometimes, often and very frequent (reference: rarely or never) long-term squatting or kneeling (OR=1.80, 95%CI: 1.47, 2.21; OR=2.43, 95%CI: 1.58, 3.75; OR=3.22, 95%CI: 1.66, 6.24) increased the risk of knee pain: long-term bending (OR=1.59, 95%CI: 1.34, 1.89) and often repeated movement of lower limbs and ankles (OR=1.48, 95%CI: 1.25, 1.75) were also risk factors for knee WMSDs among shoemaking industry workers (P<0.05). Adequate rest time (OR=0.58, 95%CI: 0.49, 0.68) and able to stretch or change leg posture (OR=0.75, 95%CI: 0.64, 0.88) reduced the risk of knee WMSDs (P<0.05). Conclusion In the shoemaking industry, length of service and awkward postures are risk factors for knee pain. The shoemaking enterprises should ensure that workers have sufficient rest time, reduce long-term standing, squatting, kneeling, and bending postures, as well as lower limbs repetition in order to reduce the occurrence of knee WMSDs of workers.
ABSTRACT
Objective: To analyze the current status of work-related musculoskeletal disorders (WMSDs), work fatigue and musculoskeletal pain in Chinese occupational population, and to study the relationship between work fatigue and musculoskeletal pain and WMSDs. Methods: A total of 66 961 employees from 323 enterprises in 15 key industries in China were selected as the study subjects using stratified cluster sampling method. The incidence of WMSDs in the past year was investigated using the Chinese version of the Musculoskeletal Disorders Questionnaire, and the work fatigue and musculoskeletal pain were investigated using Borg 6-20 Rating of Perceived Exertion Scale and visual analogue scale. The data were standardized using the age composition data of 18 to 60 years from the seventh national population census. Results: The standardized annual incidence of WMSDs was higher in the front-line workers than that in the administrative and other supportive staff (38.82% vs 36.30%). The detection rates of work fatigue and musculoskeletal pain in the study subjects were 44.54% and 63.08%, respectively. The result of S-curve fitting showed that the risk of WMSDs increased with the level of work fatigue (P<0.01). Among the front-line workers, the average of monthly fatigue frequency in the neck, shoulder, lower back, upper back, wrist/hand, foot and ankle, knee, leg, and elbow were higher in the group with WMSDs compared to those without WMSDs (all P<0.01). The pain degree of musculoskeletal pain was higher in all nine sites in the fatigued group than in the no-fatigue group (all P<0.01). The standardized detection rate of musculoskeletal pain was higher in the fatigued group than in the non-fatigued group (80.38% vs 25.71%). The work fatigue was moderate and positively correlated with musculoskeletal pain in all seven sites except the lower back and elbow, with Kendall Tau-b correlation coefficients ranging from 0.423 to 0.546 (all P<0.01). Conclusion: There is a good correlation between work fatigue and local musculoskeletal pain, work fatigue and WMSDs in Chinese occupational population. Implementing ergonomic interventions to control the development of work fatigue can be an effective measure for preventing WMSDs.
ABSTRACT
Objective To analyze the problems and solutions in the diagnosis of a patient with occupational radiogenic neoplasms. Methods The dose conversion method was selected in dose estimation. Personal dose equivalent, skin absorbed dose, and reported detection data were converted into red bone marrow absorbed dose. The upper 95% confidence limit of the probability of causation (PC 95%) was calculated. Results The PC 95% of cancer due to radiation in the worker was 66.38%, which suggested occupational radiogenic neoplasms. Personal dose data were missing in dose estimation. The current dose estimation standard lacked bedside radiography and CT operation type, and the dose conversion formula was not perfect. Conclusion In the judgment of occupational radiogenic neoplasms, the estimated dose showed uncertainty. There is an urgent need to formulate and promulgate dose estimation standards that are operational and in line with the current development of radiological diagnosis and treatment technology and equipment.
ABSTRACT
Background Prolonged awkward postures during occupational activities can lead to excessive musculoskeletal load on the wrist of workers and symptoms such as wrist pain or discomfort. Objective To survey the prevalence of wrist pain among workers in 10 key industries and analyze its correlation with wrist working postures. Methods By using stratified cluster sampling method, workers from 10 key industries, such as footwear manufacturing industry, shipbuilding manufacturing industry, and automobile manufacturing industry, were selected from seven regions in North China, East China, Central China, South China, Southwest China, Northwest China, and Northeast China. The demographic information, wrist working postures, pain in wrist of the workers were collected through a cross-sectional survey. Pearson χ2 test was used to compare prevalence by selected factors, trend χ2 test for between group comparison, and unconditional logistic regression models for the association of wrist working postures with wrist pain. Results There were 64052 workers enrolled in this survey, and 56286 provided valid questionnaires (the effective rate was 87.8%). According to the survey, the prevalence of wrist pain was 23.3% (13112/56286), and the industries with higher prevalences were footwear manufacturing (27.1%, 1927/7106), automobile manufacturing (24.9%, 5378/21560), and shipbuilding and related equipment manufacturing (24.4%, 850/3488) industries. Finger pinching (OR=2.09, 95%CI: 1.95-2.24), frequent wrist bending (OR=2.03, 95%CI: 1.92-2.15), fixed wrist bending (OR=1.77, 95%CI: 1.69-1.85), wrist on hard edge (OR=1.34, 95%CI: 1.28-1.40), and arms over shoulders (OR=1.11, 95%CI: 1.05-1.17) increased the risk of reporting wrist pain. Conclusion Awkward postures are related to wrist pain among workers in selected 10 key industries. The related factors are wrist on hard edge, frequent wrist bending, finger pinching, fixed wrist bending, and arms over shoulders.
ABSTRACT
CT is an important imaging tool for the diagnosis of novel coronavirus pneumonia (COVID-19), therefore, it′s necessary to strictly control the disinfection of CT workplace and equipment and biosafety to avoid the place from becoming a potential infection source and to reduce the risk of infection of patients and radiological staff. It is also necessary to reduce the CT scan dose to minimize the radiation hazards on patients under the premise of ensuring the CT image quality and diagnostic efficiency. Based on the survey that novel coronavirus residues after disinfection at some CT workplace in domestic and overseas and the application of low-dose CT scan in diagnosis of COVID-19, as well as the current situation of radiological protection management in emergency hospital, this paper summarizes and proposes suggestions on infection control and radiological protection for CT workplace to strengthen the defense line of COVID-19 prevention and control.
ABSTRACT
Objective@#To study the effect of noise on hypertension and hyperglycemia among occupational workers.@*Methods@#Total 670 workers in an automobile manufacturing company were selected as the subjects of physical examination in 2017. According to the noise exposure or not, the subjects were divided into control group (no noise exposure) 143 and contact group (noise exposure) 527. Questionnaire survey and physical examination were conducted. The measurement data were analyzed by t-test, and the count data and grade data were analyzed by χ2 test. The influence of noise on blood glucose, heart rate, blood pressure and other indicators was analyzed by logistic regression, and the OR and 95%CI of each risk factor were calculated.@*Results@#The average age of the control group and the contact group was no significant difference (P>0.05) . There were 139 (20.7%) cases of high systolic pressure, 154 (23.0%) cases of high diastolic pressure, 63 (9.4%) cases of hyperglycemia, 29 (4.3%) cases of tachycardia. Compared with the control group, there were significant differences in systolic blood pressure, diastolic blood pressure and blood glucose in the contact group (P<0.05) . Compared with the control group, the systolic blood pressure, diastolic blood pressure and blood glucose of the subjects in the corresponding age contact group increased significantly (P<0.05) . The years of noise exposure were protective factors for systolic and diastolic blood pressure (OR=0.970, 0.973) .@*Conclusion@#Noise exposure may increase blood pressure and blood sugar of occupational workers, but the effect on heart rate can not be determined.
ABSTRACT
OBJECTIVE: To investigate the feasibility of using 8-hydroxy-2'deoxyguanosine(8-OHdG) in blood and urine samples as biomarkers for the evaluation of human DNA oxidative damage caused by diesel exhaust(DE). METHODS: A convenient sampling method was used to select 56 male workers exposed to DE in a car manufacturing factory as exposure group, and 52 male workers without exposure to DE were selected as the control group.Urine samples and blood samples were collected from workers in the 2 groups 8 hours after work, and the levels of 8-OHdG in urine and plasma were measured by ultra-high performance liquid chromatography tandem mass spectrometer. RESULTS: The median level of urinary 8-OHdG in the exposure group was higher than that of control group(2.54 vs 2.03 μg/g Cr, P<0.05). The median levels of plasma 8-OHdG in the exposure group and control group showed no statistical significance(32.20 vs 31.40 ng/L, P>0.05). CONCLUSION: The urinary 8-OHdG can be used as a biomarker for evaluating the oxidative damage induced by DE exposure.
ABSTRACT
Objective@#To investigate the reproductive health status of female workers in petrochemical industry, and to provide a reference for improving reproductive health status and developing preventive and control measures for female workers in petrochemical industry.@*Methods@#A face-to-face questionnaire survey was performed from January to October, 2016. The Questionnaire on Women's Reproductive Health was used to investigate the reproductive health of female workers in petrochemical industry. The multivariate logistic regression model was used to identify the influencing factors for reproductive health of female workers in petrochemical industry.@*Results@#Among the 7485 female workers, 1 268 (40.9%) had abnormal menstrual period, 1 437 (46.4%) had abnormal menstrual volume, 177 (28.5%) had hyperplasia of mammary glands, and 1 807 (24.6%) had gynecological inflammation. The reproductive system diseases in female workers in petrochemical industry were associated with the factors including age, marital status, education level, unhealthy living habits, abortion, overtime work, work shift, workload, video operation, occupational exposure, positive events, and negative events, and among these factors, negative events (odds ratio[OR]= 1.856) , unhealthy living habits (OR=1.542) , and positive events (OR=1.516) had greater impact on reproductive system diseases.@*Conclusion@#Many chemical substances in the occupational environment of petrochemical industry can cause damage to the reproductive system, which not only affects the health of the female workers, but also poses potential threats to the health of their offspring. Occupational exposure, unhealthy living habits, overtime work, and work shift have great influence on reproductive system diseases in female workers.
ABSTRACT
Electronics industry is a typical labor-intensive industry in China. There are a lot of female workers and various occupational hazard factors in the workplace. This article reviewed the characteristics of employment of women in electronics industry, occupational hazards of exposure, protective measures, occupational disease situation, influence of reproductive health and mental health, and occupational health management. Electronics female emplyees have the priority in reproductive health and mental health. Besides, this group has poor protective measures, occupational health management and policy should be taken to enhance the level of women health in electronics industry.
ABSTRACT
Objective@#To investigate the reproductive health status of female workers engaged in administrative management, and to provide a reference for protecting the reproductive health of female workers. @*Methods@#From April to November, 2016, a cross-sectional survey was performed for 2717 female workers aged 18-60 years and engaged in administrative management from 13 cities and provinces in China, and a questionnaire was used to investigate their general information, occupational hazards in workplace, and reproductive health status, and the reproductive health status of female workers was analyzed. @*Results@#Of all 2 717 female workers, 1 170 had gynecological diseases or symptoms, resulting in an incidence rate of 43.06%, and among these workers, 11.15% had abnormal menstruation, 34.64% had infertility, and 38.76% had a history of abortion. There were significant differences in the rates of abnormal results of gynecological examination, abnormal menstruation, abortion, and infertility between the female workers in different age groups (P<0.01) . Unhealthy living habits and major events were risk factors for gynecological diseases, abnormal menstruation, and abortion (P<0.05) ; bad working status was a risk factor for gynecological diseases and abortion (P<0.05) ; exposure to harmful factors was a risk factor for gynecological diseases and abnormal menstruation (P<0.05) . @*Conclusion@#Living habits, major events, working status, and occupational harmful factors have certain influence on reproductive health of female workers engaged in administrative management. Occupational health protection should be strengthened, working patterns should be improved, self-protection awareness should be raised, and health protection should be enhanced for women of childbearing age to protect and promote the reproductive health of female workers.
ABSTRACT
Objective To grasp bilirubin in the quality control serum and calibration items in the same batch the variation law of the designed to ensure that the test quality and the use of reasonable quality control serum and calibration items ,control testing cost .Methods laboratories use The double level quality control serum and calibration items after dilution is divided into five groups ,with automatic biochemical analyzer test for 12 weeks and recorded results of TBIL ,DBIL .use SPSS 17 .0 to calculate the mean ,standard deviation ,coefficient of variation ,Normal distribution analysis and make the results trend line chart to observe any changes .Results RANDOX normal concentration quality control serum TBIL and DBIL values variation RCV% 26 .0% ,48 .2% , more than CLIA bilirubin projects allow 1/3 of the total error value(6 .67% ) .Normal distribution test ,P value was 0 .006 ,0 .012 , less than 0 .05 ,do not obey the normal distribution ,test results line chart is on the decline .LEADMAN high concentration quality control serum and bilirubin calibration items TBIL and DBIL variation RCV% 0 .05 ,obey the normal distribution ,test results no trend line chart .Conclusion Through the experiment observation to the quality control ser‐um and calibration items bilirubin in the variation law of 12 weeks .Experimenter can be used according to the actual situation to ad‐just ,not only to ensure the quality of the bilirubin test ,and to get the most out of the quality control serum and calibration items use efficiency ,reduce the test cost .