Association of defects of enamel with polymorphisms in the vitamin D receptor and parathyroid hormone genes

Abstract This cross-sectional study aimed to investigate the association between developmental defects of enamel (DDE) and single nucleotide polymorphisms (SNPs) in the genes encoding the vitamin D receptor (VDR) and parathyroid hormone (PTH). Orthodontic patients receiving treatment at a dental school were selected through convenience sampling. Intra-oral photographs were used to assess DDE, which were classified according to the criteria proposed by Ghanim et al. (2015) by a single calibrated examiner (Kappa>0.80). Enamel hypoplasia, molar-incisor hypomineralization (MIH), hypomimineralized second primary molar (HSPM), and non-MIH/HSPM demarcated opacities were considered for the analysis. Genomic DNA was extracted from buccal cells. The SNPs in VDR (rs7975232) and PHT (rs694, rs6256, and rs307247) were genotyped using real-time polymerase chain reactions (PCR). Statistical analyses were performed using the PLINK software (version 1.03, designed by Shaun Purcell, EUA). Chi-square or Fisher's exact tests were performed at a significance level of 5%. Ninety-one (n=91) patients (49 females and 42 males) (mean age of 14.1±5.8 years) were included. The frequency of DDE was 38.5% (35 patients). Genotype distributions were in Hardy-Weinberg equilibrium. No significant statistical association was found between DDE and the SNPs evaluated. A borderline association (p=0.09) was observed between DDE and the CC haplotype for SNP rs7975232 in VDR. In conclusion, the selected SNPs in VDR and PTH genes were not associated with DDE in the studied samples.

Resumo Este estudo transversal teve como objetivo investigar a associação entre defeitos de desenvolvimento do esmalte (DDE) e polimorfismos de nucleotídeo único (SNPs) nos genes que codificam o receptor da vitamina D (VDR) e o hormônio da paratireoide (PTH). Pacientes ortodônticos em tratamento em uma escola Odontologia foram selecionados por amostragem de conveniência. Os DDEs foram avaliados e classificados por um examinador calibrado (Kappa>0,80) através de fotografias intraorais de acordo com os critérios propostos por Ghanim et al. (2015). Os tipos de DDE considerados para análise foram: hipoplasia de esmalte, hipomineralização molar-incisivo (HMI), hipomineralização de segundos molares decíduos (HSMD) e opacidades demarcadas não-HMI/HSMD. O DNA gnômico foi extraído de células bucais. Os SNPs em VDR (rs7975232) e PTH (rs694, rs6256 e rs307247) foram genotipados por PCR em tempo real. As análises estatísticas foram realizadas utilizando o software PLINK (versão 1.03, concebido por Shaun Purcell, EUA). Foram feitos teste de qui-quadrado e teste exato de Fisher com um nível de significância de 5%. Foram incluídos noventa e um (n=91) pacientes (49 do sexo feminino e 42 do sexo masculino) (idade média de 14,1±5,8 anos). A frequência de DDE foi de 38,5% (35 pacientes). As distribuições genotípicas estavam em equilíbrio de Hardy-Weinberg. Não foi encontrada associação estatisticamente significante entre os DDEs e os SNPs avaliados. Foi observada uma associação limítrofe (p=0,09) entre a DDE e o haplótipo CC para o SNP rs7975232 no VDR. Em conclusão, os SNPs seleccionados nos genes VDR e PTH não foram associados à DDE nas amostras estudadas.

Insertion torque, flexural strength and surface alterations of stainless steel and titanium alloy orthodontic mini-implants: an in vitro study

ABSTRACT Objective: This study aimed to compare the insertion torque (IT), flexural strength (FS) and surface alterations between stainless steel (SS-MIs) and titanium alloy (Ti-MIs) orthodontic mini-implants. Methods: Twenty-four MIs (2 x 10 mm; SS-MIs, n = 12; Ti-MIs, n = 12) were inserted on artificial bone blocks of 20 lb/ft3 (20 PCF) and 40 lb/ft3 (40 PCF) density. The maximum IT was recorded using a digital torque meter. FS was evaluated at 2, 3 and 4 mm-deflection. Surface topography and chemical composition of MIs were assessed by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). General linear and mixed models were used to assess the effect of the MI type, bone density and deflection on the evaluated outcomes. Results: The IT of Ti-MIs was 1.1 Ncm greater than that obtained for the SS-MIs (p= 0.018). The IT for MIs inserted in 40 PCF test blocks was 5.4 Ncm greater than that for those inserted in 20 PCF test blocks (p < 0.001). SS-MIs inserted in higher density bone (40 PCF) had significantly higher flexural strength than the other groups, at 2 mm (98.7 ± 5.1 Ncm), 3 mm (112.0 ± 3.9 Ncm) and 4 mm (120.0 ± 3.4 Ncm) of deflection (p< 0.001). SEM evidenced fractures in the Ti-MIs. EDS revealed incorporation of 18% of C and 2.06% of O in the loaded SS-MIs, and 3.91% of C in the loaded Ti-MIs. Conclusions: Based on the findings of this in vitro study, it seems that SS-MIs offer sufficient stability and exhibit greater mechanical strength, compared to Ti-MIs when inserted into higher density bone.

RESUMO Objetivo: O objetivo deste estudo foi comparar o torque de inserção (TI), a resistência flexural (RF) e as alterações de superfície em mini-implantes ortodônticos de aço inoxidável (MIs-Ai) e de liga de titânio (MIs-Ti). Métodos: Vinte e quatro MIs (2 x 10 mm; MIs-Ai, n = 12; MIs-Ti, n = 12) foram inseridos em blocos de osso artificial de densidades de 20 lb/ft3 (20 PCF) e 40 lb/ft3 (40 PCF). O torque máximo de inserção foi registrado por meio de um torquímetro digital. A resistência flexural foi avaliada nas deflexões de 2, 3 e 4 mm. Topografia de superfície e composição química dos MIs foram avaliadas por Microscopia Eletrônica de Varredura (MEV) e Espectroscopia de Energia Dispersiva de Raios X (EDS). Modelos lineares gerais e mistos foram utilizados para avaliar o efeito do tipo de MI, da densidade óssea e da deflexão nos desfechos avaliados. Resultados: O TI dos MIs-Ti foi 1,1 Ncm maior do que o obtido para os MIs-Ai (P = 0,018). O TI para MIs inseridos em blocos de teste de 40 PCF foi 5,4 Ncm maior do que para aqueles inseridos em blocos de teste 20 PCF (p < 0,001). MIs-Ai inseridos em osso de maior densidade (40 PCF) apresentaram resistência flexural significativamente maior do que outros grupos, em deflexões de 2 mm (98,7 ± 5,1 Ncm), 3 mm (112,0 ± 3,9 Ncm) e 4 mm (120,0 ± 3,4 Ncm) (p < 0,001). A MEV evidenciou fraturas nos MIs-Ti. A EDS revelou incorporação de 18% de C e 2,06% de O nos MIs-Ai e 3,91% de C nos MIs-Ti, ambos submetidos a testes mecânicos. Conclusões: Com base nos resultados desse estudo in vitro, os MIs-Ai aparentam oferecer adequada estabilidade e maior resistência mecânica, em comparação aos MIs-Ti, quando inseridos em osso de maior densidade.

Investigating the association between dental age and polymorphisms in genes encoding estrogen receptors

Abstract Background Genetic polymorphisms have been shown to influence several physiological traits, including dental and craniofacial characteristics. Understanding the clinical relevance of genetic polymorphisms in dental practice is crucial to personalize treatment plans and improve treatment outcomes. Objective to evaluate the association between dental age and genetic polymorphisms in genes encoding estrogen receptors alpha and beta (ESR1 and ESR2, respectively) in a sample of Brazilian children. Methodology This retrospective cross-sectional study was performed with children undergoing orthodontic treatment. Patients with syndromes, congenital anomalies, craniofacial deformities, under hormonal or systemic treatment, and with a previous history of facial trauma were excluded. Panoramic radiographs were used to assess dental age according to the Demirjian, Goldstein, and Tanner method. A delta [dental age-chronological age (DA-CA)] was obtained, which shows whether the patient tends to have a normal, delayed (negative values), or advanced (positive values) dental age. DNA isolated from buccal cells was used to genotype four genetic polymorphisms: rs9340799 (A>G) and rs2234693 (C>T), located in ESR1; and rs1256049 (C>T) and rs4986938 (C>T), located in ESR2. A statistical analysis was performed and values of p<0.05 indicated statistical difference. Results A total of 79 patients were included, 44 (55.70%) girls and 35 (44.30%) boys. The Demirjian, Goldstein, and Tanner method, in general, overestimated patients' age by 0.75 years. There was no difference in the delta of dental age between the sexes (p>0.05). Genetic polymorphisms in ESR1 and ESR2 were not associated with dental age (p>0.05). Conclusion The studied genetic polymorphisms in ESR1 and ESR2 were not associated with dental age in Brazilian children.

Impact of cigarette smoke on osteogenic and osteoclast signaling in middle palatal suture

Abstract Considering that smoking is a public health problem that has been growing among adolescents, the aim of this study was to investigate the impact of cigarette smoke on osteogenic and osteoclastogenic signaling in middle palatal suture of rats. Male Wistar rats exposed (n = 30) or not to cigarette smoke (n = 30) were used. Exposure to smoke was carried out for two daily periods of 3 minutes each, with an interval of 12 hours between exposures. After the experimental periods of 3, 7, 14 and 21 days, the animals were euthanized. The collected tissues were analyzed using light microscopy and real-time RT-PCR was performed to investigate gene expression. The data obtained were compared using the Kruskal Wallis and Dunn tests (⍺ = 5%). Morphologically, there were no significant changes in the middle palatal suture of rats exposed or not to cigarette smoke during 3, 7, 14 and 21 days (p> 0.05). On the other hand, osteoclastogenic signaling was increased in animals exposed to smoke and was characterized by a higher production of RANKL at 3 and 14 days (p <0.05), with no change in the synthesis of RANK and osteoprotegerin (p> 0.05). Interestingly, in the exposed animals, an early increase in the synthesis of osteocalcin, bone sialoprotein and osteopontin was also identified at 3 days of exposure (p <0.05), not sustained over time (p> 0.05). Cigarette smoke modulates osteogenic and osteoclastogenic signaling in the middle palatal suture of young rats, although morphological changes have not been evidenced.

Resumo Considerando que a fumaça de cigarro é um problema de saúde pública que está crescendo entre os adolescentes, o objetivo deste estudo foi investigar o impacto da fumaça de cigarro na sinalização osteogênica e osteoclastogênica da sutura palatina mediana de ratos. Foram utilizados ratos Wistar machos expostos (n=30) e não expostos à fumaça de cigarro (n=30). A exposição à fumaça de cigarro foi realizada duas vezes ao dia por 3 minutos, com um intervalo de 12 horas entre as exposições. Os animais foram mortos após o período experimental de 3, 7, 14 e 21 dias. Os tecidos coletados foram analisados em microscópico de luz e pelo RT-PCR em tempo real foi realizado para investigar a expressão gênica. s dados obtidos foram comparados usando o testes de Kruskal Wallis e Dunn (⍺ = 5%). Morfoligicamente, não houve mudança significativa na sutura palatina mediana nos ratos expostos ou não à fumaça de cigarro durante os tempo de 3, 7, 14 e 21 dias (p> 0.05). Por outro lado, a sinalização osteogênica esta aumentada nos animais expostos à fumaça e foi caracterizado por um aumento da produção de RANKL aos 3 e 14 dias (p <0.05), sem mudança na síntese da produção de RANK e osteoprotegerina (p> 0.05). Curiosamente, nos animais expostos, também foi observado um aumento precoce da síntese de osteocalcina, sialoproteína óssea e de osteopontina aos 3 dias de exposição, o que não foi mantido ao longo do tempo. A fumaça de cigarro modula a sinalização osteogênica e osteoclastogênica na sutura palatina mediana de ratos jovens, apesar de não tenha sido evidenciado alterações morfológicas.

CO2 laser irradiation for debonding ceramic orthodontic brackets

Abstract This study evaluated shear bond strength (SBS), adhesive remnant index (ARI) and fracture mode of chemically and mechanically retained ceramic brackets bonded with different composite resins and irradiated with CO2 laser. The null hypothesis was that ceramic brackets bonded with different composite resins and irradiated with CO2 laser would have similar SBS values. Ninety human premolars were divided into four experimental groups according to the combination of type of composite resin (Transbond XT and Z 250) and type of ceramic bracket (Fascination and Mystique), and two control groups (n=15). In the four experimental groups, the brackets were irradiated with CO2 laser at 10 W for 3 seconds before SBS testing. Enamel surface ARI was calculated after debonding under electron microscopy scanning. ANOVA and the Mann-Whitney test were used for statistical analysis. The laser groups had lower SBS values than the non-irradiated groups (control) (p<0.05). The mechanically retained brackets (Mystique) had the higher (p<0.05) and Z250 had the lower SBS values after CO2 laser irradiation. The groups bonded with Z250 had the highest ARI. Adhesive fractures were the most prevalent. The null hypothesis was rejected. CO2 laser decreased SBS efficiently and facilitated debonding of mechanically and chemically retained ceramic brackets.

Resumo O objetivo do estudo foi avaliar a resistência de união ao cisalhamento da colagem (RCC), o índice de remanescente de adesivo (IRA) e o modo de fratura de bráquetes cerâmicos com retenção química e mecânica colados com diferentes compositos e irradiados com laser de CO2. A hipótese nula testada foi que bráquetes colados com diferentes compósitos e irradiados com laser de CO2 apresentam valores semelhantes de RCC. Noventa pré-molares humanos foram divididos em 6 grupos (n=15): 2 controles e 4 experimentais que se diferenciaram pelo tipo de bráquete ceramic (Fascination and Mystique) e pelo compósito de fixação (Transbond XT e Z 250). Nos quatro grupos experimentais, os bráquetes foram irradiados com laser de CO2 com 10W por 3 segundos anteriormente ao teste de RCC. O IRA das superficies de esmalte foram avaliados após a descolagem e submetidos a análise em microscopia electrônica de varredura (MEV). Para análise estatística foram utilizados ANOVA e o teste de mann-Whitney. Os grupos laser mostraram valores de RCC menores que os grupos não irradiados (controles) (p<0.05). Os bráquetes com retenção mecânica (Mystique) mostraram alta RCC (p<0.05) e o compósito Z 250 obteve os mais baixos valores de RCC após irradiação com laser. Os grupos colados com o compósito Z 250 apresentaram os mais altos escores do IRA. O modo de fratura mais prevalente foi a adesiva. A hipótese nula foi rejeitada. O laser de CO2 foi eficaz para diminuir os valores de RCC e facilitou a descolagem dos bráquetes cerâmicos de retenção química e mecânica

Transverse maxillary deficiency: treatment alternatives in face of early skeletal maturation

ABSTRACT Transverse deficiencies should be a priority in orthodontic treatment, and should be corrected as soon as diagnosed, to restore the correct transverse relationship between maxilla and mandible and, consequently, normal maxillary growth. Corrections may be performed at the skeletal level, by opening the midpalatal suture, or by dentoalveolar expansion. The choice of a treatment alternative depends on certain factors, such as age, sex, degree of maxillary hypoplasia and maturation of the midpalatal suture. Thus, the present study discusses different treatment approaches to correct maxillary hypoplasia in patients with advanced skeletal maturation.

RESUMO Os problemas transversais devem ser priorizados no tratamento ortodôntico e corrigidos assim que diagnosticados, para restituir a correta relação transversal entre maxila e mandíbula e, consequentemente, restabelecer o crescimento maxilar normal. A correção pode ser realizada em nível esquelético, por meio da abertura da sutura palatina mediana (SPM), ou por expansão dentoalveolar. A opção de tratamento depende de alguns fatores como idade, sexo, grau de hipoplasia da maxila e a maturação da SPM. Assim, o objetivo do presente trabalho foi discutir as diferentes abordagens terapêuticas para correção da hipoplasia maxilar em pacientes com maturação esquelética avançada.

Genetic polymorphism in ESR2 and risk of tooth agenesis

Introduction: Tooth agenesis (TA) is the congenital absence of teeth. Several studies have proposed a strong genetic background for this condition. Aim: The present cross-sectional study aimed to evaluate whether genetic polymorphisms in the genes that code for estrogen receptors ( ESR1 and ESR2 ) are associated with the presence of isolated TA in a Brazilian sample. Methods: Panoramic radiographs of 142 orthodontic patients were assessed to determine TA of permanent teeth (excluding third molars). DNA of patients was extracted from buccal cells from saliva to evaluate genetic polymorphisms in ESR1 ( rs2234693 and rs9340799 ) and ESR2 ( rs1256049 and rs4986938 ) by genotyping using the real-time PCR technique. For statistical analyses, associations between the distributions of the alleles and genotypes, and the ocurrence of TA were assessed for each genetic polymorphism, with an established alpha of 5%. Results: Thirteen patients had at least 1 congenital missing tooth. The number of congenitally missing teeth ranged from 1 to 11. The genetic polymorphisms rs2234693 and rs9340799 in ESR1 and rs1256049 in ESR2 were not associated with TA ( p > 0.05) . For the genetic polymorphism rs4986938 in ESR2, the genotype and allele distributions were significantly different between the patients with and without TA ( p < 0.05). The CC genotype and the C allele were overrepresented in the TA patients. Conclusion: The genetic polymorphism rs4986938 in ESR2 was associated with the ocurrence o f TA.

Introdução: A agenesia dentária (AD) é a ausência congênita de um ou mais dentes. Vários estudos vêm sugerindo o forte componente genético para essa condição. Objetivo: O presente estudo teve como objetivo avaliar se os polimorfismos genéticos nos genes que codificam os receptores de estrógeno ( ESR1 e ESR2 ) estão associados à ocorrrência de AD isolada em uma amostra brasileira. Métodos: Radiografias panorâmicas de 142 pacientes ortodônticos foram avaliadas para determinar AD de dentes permanentes (excluindo terceiros molares). O DNA dos pacientes foi extraído das células da mucosa bucal contidas na saliva para avaliar polimorfismos genéticos em ESR1 ( rs2234693 e rs9340799 ) e ESR2 ( rs1256049 e rs4986938 ) por genotipagem usando a técnica de PCR em tempo real. Para análises estatísticas, associações entre as distribuições dos alelos e genótipos e a ocorrrência de AD foram avaliadas para cada polimorfismo genético, com um alfa estabelecido de 5%. Resultados: Treze pacientes tiveram pelo menos 1 dente congenitamente ausente. O número de dentes congenitamente ausentes variou de 1 a 11. Os polimorfismos genéticos rs2234693 e rs9340799 no ESR1 e rs1256049 no ESR2 não foram associados à AD ( p > 0,05). Para o polimorfismo genético rs4986938 no ESR2 , as distribuições dos genótipos e dos alelos foram estatisticamente diferentes entre os pacientes com e sem AD ( p < 0,05). O genótipo CC e o alelo C estavam super-representados nos pacientes com AD. Conclusão: Houve associação entre o polimorfismo genético rs4986938 no ESR2 e a ocorrrência de AD.

Microbial species associated with dental caries found in saliva and in situ after use of self-ligating and conventional brackets

Abstract Objectives Enamel demineralization is among the main topics of interest in the orthodontic field. Self-ligating brackets have been regarded as advantageous in this aspect. The aim of this study was to evaluate the break homeostasis in the oral environment and the levels of microorganisms associated with dental caries among the different types of brackets. Material and Methods Twenty patients received two self-ligating brackets: In-Ovation®R, SmartClipTM, and one conventional GeminiTM. Saliva was collected before bonding (S0), 30 (S1) and 60 (S2) days after bonding. One sample of each bracket was removed at 30 and 60 days for the in situ analysis. Checkerboard DNA-DNA Hybridization was employed to evaluate the levels of microbial species as-sociated with dental caries. Data were evaluated by nonparametric Friedman and Wilcoxon tests at 5% significance level. Results The salivary levels of L. casei (p=0.033), S. sobrinus (p=0.011), and S. sanguinis (p=0.004) increased in S1. The in situ analyses showed alteration in S. mutans (p=0.047), whose highest levels were observed to the In-Ovation®R. Conclusions The orthodontic appliances break the salivary homeostasis of microorganisms involved in dental caries. The contamination pattern was different between self-ligating and conventional brackets. The In-Ovation®R presented worse performance considering the levels of cariogenic bacterial species.

Quantification of pro-inflammatory cytokines and osteoclastogenesis markers in successful and failed orthodontic mini-implants

Abstract Objectives: Miniscrew has been frequently used, considering that anchorage control is a critical point in orthodontic treatment, and its failure, the main adverse problem. Using two groups of stable (successful) and unstable (failed) mini-implants, this in vivo study aimed to quantify proinflammatory cytokines IL-1 α, IL-6, IL-17, and TNF-α and osteoclastogenesis marker RANK, RANKL, and OPG in gingival tissue, using the real-time polymerase chain reaction technique. Methodology: Thirteen patients of both sexes (11-49 years old) under orthodontic treatment were selected, obtaining 11 successful and 7 failed mini-implants. The mini-implants were placed and removed by the same surgeon, in both jaws. The mean time of permanence in the mouth was 29.4 months for successful and 7.6 months for failed mini-implants. At removal time, peri-mini-implant gingival tissue samples were collected and processed for quantification of the proinflammatory cytokines and osteoclastogenesis markers. Nonparametric Wilcoxon rank-sum test considering the clusters and Kruskal-Wallis test were used for statistical analysis (α=0.05). Results: No significant difference (p>0.05) was observed between the groups for either quantification of cytokines or osteoclastogenesis markers, except for IL-6 (p<0.05). Conclusions: It may be concluded that the expression of IL-1α, IL-17, TNF-α, RANK, RANKL, and OPG in peri-implant gingival tissue were not determinant for mini-implant stability loss, but the higher IL-6 expression could be associated with mini-implant failure.

Rapid maxillary expansion in the treatment of the functional posterior crossbite: joint noise and electromyographic activity analysis / Expansão rápida da maxila no tratamento da mordida cruzada posterior: análise de ruídos articulares e atividade eletromiográfica

Abstract Introduction The rapid maxillary expansion (RME) reduces the risk of developing structural and functional disorders in the stomatognathic system. Objective To examine the effects of the RME as a treatment for the posterior crossbite, related with the electromyographic activity of the masticatory muscles and the TMJ noises in a population of children. Material and method 13 girls and 7 boys, regardless of the type of malocclusion, with a mean age of 9 years old (± 3), were treated with RME. The electrovibratography analyzed the TMJ noise, and the electromyography analyzed the masticatory muscles before treatment (T0) and after three months of a short-term follow-up (T1). The comparisons of the affected and unaffected sides by the crossbite were performed using Mann-Whitney's test, and to compare data before and after treatment the Wilcoxon's test was used (level of significance: 5%). Result No significant differences were found in the parameters of joint noise in comparison to the sides affected and unaffected by the crossbite, in both T0 and T1 (p>0.05); only the side without the crossbite observed decrease in the peak amplitude of the joint noises after treatment. In the static electromyographic analysis, inter-side differences were observed before and after treatment, since the deliberate unilateral chewing showed greater asymmetry activity in T0 for both sides, which has been corrected after treatment, improving the functional chewing. Conclusion The proposed treatment did not lead to the occurrence of joint noises and improved the functional pattern of electromyographic activity during chewing at the end of treatment.

Resumo Introdução A expansão rápida da maxila (RME) reduz o risco de desenvolvimento de distúrbios estruturais e funcionais no sistema estomatognático. Objetivo Analisar os efeitos desta intervenção como tratamento para a mordida cruzada posterior, relacionados à ocorrência de ruídos nas articulações temporomandibulares e à atividade eletromiográfica dos músculos masseter e temporal anterior. Material e método 13 meninas e 7 meninos, independentemente do tipo de maloclusão, com idade média de 9 anos (±3), foram tratadas com RME. Por meio de eletrovibratografia analisou-se ruídos nas articulações temporomandibulares, e de eletromiografia de superfície a atividade dos músculos mastigatórios antes (T0) e após 3 meses do final do tratamento proposto (T1). As comparações entre os lados afetado e não afetado pela mordida cruzada foram realizadas utilizando-se o teste de Mann-Withney. As comparações de antes e após o tratamento foram realizadas pelo teste de Wilcoxon (nível de significância: 5%). Resultado Não houve diferença significativa na eletrovibratografia entre os lados afetado e não afetado pela mordida cruzada, tanto em T0 como em T1 (p>0.05); do lado sem mordida cruzada observou-se diminuição do pico de amplitude dos ruídos articulares após a expansão rápida da maxila (p<0.05). Na análise da eletromiografia estática foram observadas diferenças inter-lados antes e após o tratamento, uma vez que a mastigação deliberada unilateral apresentou maior atividade de assimetria em T0 para ambos os lados, o que foi corrigido após o tratamento (p<0.05), melhorando a mastigação funcional padrão. Conclusão O tratamento proposto para mordida cruzada posterior funcional não levou à ocorrência de ruídos articulares e melhorou o padrão funcional da atividade eletromiográfica durante a mastigação ao final do tratamento.