ABSTRACT
The bond strength to the silicate-based CAD/CAM blocks may be affected by the composition and microstructure of the silicatebased blocks, surface treatment, and the properties of the applied adhesive. In this study, the shear bond strength to the silicate blocks with various universal adhesives after sandblasting or HF-treatment was measured, and the effects of the additional silane application after surface treatments are evaluated. Six silica-containing blocks and five universal adhesives currently used in dental clinics were selected. After polishing the silicate block surface, the specimens were divided into two groups. The first groups were HF-treated and the second groups were sandblasted with alumina, and the surface roughness, contact angle, and microstructure were analyzed by CLSM (Confocal Laser Scanning Microscope), contact angle analyzer, and FE-SEM (Field Emission Scanning Electron Microscope).Composite resin (2 mm diameter) was bonded with universal adhesive to silicate blocks and stored in a 37 ℃ water bath for 24 hours, and the shear bond strength was measured using a universal testing machine. The measured values were statistically analyzed using the Tukey-multiple comparison test (α=0.05). For hybrid composite ceramics, there was no significant difference in bond strength between sandblasting or HF-treatment, and additional silane application may not be necessary when bonding with a universal adhesive, whereas for leucite-reinforced and lithium disilicate glass-ceramics, HF-treatment may be more favorable for adhesion than sandblasting, and additional silane application appears to be necessary even when applying a universal adhesive.
ABSTRACT
Objective@#: The parafascicular nucleus (PF) plays important roles in controlling the basal ganglia. It is not well known whether the PF affects the development of abnormal involuntary movements (AIMs). This study was aimed to find a role of the PF in development of AIMs using optogenetic methods in an animal model. @*Methods@#: Fourteen rats were underwent stereotactic operation, in which they were injected with an adeno-associated virus with channelrhodopsin (AAV2-hSyn-ChR2-mCherry) to the lateral one third of the PF. Behavior test was performed with and without optical stimulation 14 days after the injection of the virus. AIM of rat was examined using AIM score. After the behavior test, rat’s brain was carefully extracted and the section was examined using a fluorescence microscope to confirm transfection of the PF. @*Results@#: Of the 14 rats, seven rats displayed evident involuntary abnormal movements. AIM scores were increased significantly after the stimulation compared to those at baseline. In rats with AIMs, mCherry expression was prominent in the PF, while the rats without AIM lacked with the mCherry expression. @*Conclusion@#: AIMs could be reversibly induced by stimulating the PF through an optogenetic method.
ABSTRACT
The shear bond strength of the composite resin to a CAD/CAM hybrid composite resin block (CRB) can be affected by the composition and microstructure of the hybrid CRB, surface treatment and the properties of the applied adhesive. In this study, the shear bond strengths between composite resin and the hybrid CRBs were measured to evaluate the effect of microstructure differences in hybrid CRBs on the bond strength. Ten conventional and reinforced hybrid CRBs developed by five domestic and international manufacturersand five universal adhesives currently used in dentistry were selected. After polishing the hybrid CRB surface, the specimens were divided into two groups. The first group was HF-treated to observe the microstructure by FE-SEM, and the second group was sandblasted with alumina, measured the surface roughness by CLSM, bonded with composite resin (diameter = 2.0mm) using universal adhesive, and stored in a 37 ℃ water bath for 24 hours, and measured the shear bond strength using a universal testing machine. The measured values were statistically analyzed using the Tukey-multiple comparison test (α= 0.05). It was observed that the size, type, and fraction of the filler particles contained in the regular and reinforced hybrid CRBs affected the microstructure, but the differences did not affect the shear bond strength. All five universal adhesives containing 10-MDP as the main functional monomer met the minimum bond strength (>20 MPa) required for clinical applications.
ABSTRACT
Purpose@#. The purpose of the study was to fabricate a prototype robotic simulator for dental education, to test whether it could simulate mandibular movements, and to assess the possibility of the stimulator responding to stimuli during dental practice. @*Materials and methods@#. A virtual simulator model was developed based on segmentation of the hard tissues using cone-beam computed tomography (CBCT) data. The simulator frame was 3D printed using polylactic acid (PLA) material, and dentiforms and silicone face skin were also inserted. Servo actuators were used to control the movements of the simulator, and the simulator’s response to dental stimuli was created by pressure and water level sensors.A water level test was performed to determine the specific threshold of the water level sensor. The mandibular movements and mandibular range of motion of the simulator were tested through computer simulation and the actual model. @*Results@#. The prototype robotic simulator consisted of an operational unit, an upper body with an electric device, a head with a temporomandibular joint (TMJ) and dentiforms. The TMJ of the simulator was capable of driving two degrees of freedom, implementing rotational and translational movements. In the water level test, the specific threshold of the water level sensor was 10.35 ml. The mandibular range of motion of the simulator was 50 mm in both computer simulation and the actual model. @*Conclusion@#. Although further advancements are still required to improve its efficiency and stability, the upper-body prototype simulator has the potential to be useful in dental practice education.
ABSTRACT
This study aimed to analyze the eluted components of syringe-type bis-acryl composites and to evaluate the effect of removing the oxygen-inhibited layer on cytotoxicity. Four different bis-acryl provisional composite materials-Protemp 4 (PT), Structur 2 SC (ST), Luxatemp Automix Plus (LT), and Hexa-Temp (HT)-were evaluated. Gas chromatography/mass spectrometry was used to analyze the composite eluate after 24 h of immersion in methanol. An agar overlay test and a live/dead assay were performed on the polymerized disc-shaped specimens after 24 h. To evaluate the effect of removing the oxygen-inhibited layer, samples were prepared with a surface oxygen-inhibited layer. The surface oxygen-inhibited layer of the disc-shaped specimens was removed with alcohol only (subgroup A) or with polishing and alcohol (subgroup PA), and their cytotoxicities were compared with those of “as received” (subgroup N) specimens using the WST-1 assay. Statistical significance was assessed using analyses of variance, followed by Bonferroni multiple comparison tests (α=0.05). Different components were detected by gas chromatography/mass spectrometry analysis among the groups. The agar overlay assay confirmed severe cytotoxicity in HT, LT, and ST groups, whereas PT showed moderate cytotoxicity. The effect of removing the oxygen-inhibited layer on cell viability was significantly higher in PA than in N in all composite groups. In HT and ST, the cell viability was significantly higher in PA than in A. Syringe-type bis-acryl composites for provisional restorations may elute various components into the oral cavity, which may cause cytotoxicity in adjacent structures. The cytotoxicity of the materials is reduced by the removal of the oxygen-inhibited layer.
ABSTRACT
Objective@#: No optimum genetic rat Huntington model both neuropathological using an adeno-associated virus (AAV-2) vector vector has been reported to date. We investigated whether direct infection of an AAV2 encoding a fragment of mutant huntingtin (AV2-82Q) into the rat striatum was useful for optimizing the Huntington rat model. @*Methods@#: We prepared ten unilateral models by injecting AAV2-82Q into the right striatum, as well as ten bilateral models. In each group, five rats were assigned to either the 2×1012 genome copies (GC)/mL of AAV2-82Q (×1, low dose) or 2×1013 GC/mL of AAV2-82Q (×10, high dose) injection model. Ten unilateral and ten bilateral models injected with AAV-empty were also prepared as control groups. We performed cylinder and stepping tests 2, 4, 6, and 8 weeks after injection, tested EM48 positive mutant huntingtin aggregates. @*Results@#: The high dose of unilateral and bilateral AAV2-82Q model showed a greater decrease in performance on the stepping and cylinder tests. We also observed more prominent EM48-positive mutant huntingtin aggregates in the medium spiny neurons of the high dose of AAV2-82Q injected group. @*Conclusion@#: Based on the results from the present study, high dose of AAV2-82Q is the optimum titer for establishing a Huntington rat model. Delivery of high dose of human AAV2-82Q resulted in the manifestation of Huntington behaviors and optimum expression of the huntingtin protein in vivo.
ABSTRACT
Purpose@#The purpose of this study was to compare the biomechanical outcome in the mandibular posterior region between two different loading conditions by finite element analysis. @*Materials and Methods@#The mandibular posterior teeth model and the implant model were generated for the study. And 2 different types of loading conditions were provided: Arbitrary occlusion and natural occlusion obtained from the digital occlusal analyzer, Accura (Accura, Dmetec Co. Ltd., Seoul, Korea). Total load of 100 N was evenly distributed over arbitrary occlusion points, and 100 N load was differentially distributed over natural occlusion points according to Accura data. The biomechanical outcome was evaluated by the finite element analysis software. @*Results@#The result of finite element analysis showed considerable difference in both von Mises stress pattern and displacement under different loading conditions. @*Conclusion@#In finite element analysis, it is recommended to simulate a realistic occlusal loading pattern that is based on accurate measurement.
ABSTRACT
PURPOSE: The purpose of this study was to examine the association between the intake of semi-solid yogurt and periodontitis in Korean adults using a national database. METHODS: The data analyzed in this study are a subset of the sixth Korean National Health and Nutrition Examination Survey conducted in 2015 by the Korea Centers for Disease Control and Prevention. The sample size for this study was 4,727. We collected data on sociodemographic characteristics, oral health-related variables, oral and general health status, and intake of semi-solid yogurt. Semi-solid yogurt intake (YI) was calculated by multiplying the frequency of YI over the previous week by the average intake per serving. We assessed periodontal conditions using the Community Periodontal Index (CPI) and defined periodontitis as a CPI score ≥3. Multivariate logistic regression analyses were performed after adjusting for sociodemographic variables, and oral and general health behaviors and status. RESULTS: The mean weekly YI among those without periodontitis (1.03±0.06 cups) was significantly higher than among those with periodontitis (0.77±0.08 cups) (P<0.001). Individuals who consumed more than 2 cups of yogurt per day were 76% less likely to have periodontitis than those who consumed less than 1 cup of yogurt per week after adjusting for all covariates (odds ratio, 0.24; 95% confidence interval, 0.10–0.60). CONCLUSIONS: We found a significant association between increased intake of semi-solid yogurt and periodontal health. We therefore recommend daily consumption of semi-solid yogurt as a probiotic to improve periodontal health. Further longitudinal studies are required to elucidate plausible mechanisms through which probiotics impact periodontal disease, considering both periodontal pathogens and clinical periodontal parameters.
Subject(s)
Adult , Humans , Health Behavior , Korea , Logistic Models , Longitudinal Studies , Nutrition Surveys , Periodontal Diseases , Periodontal Index , Periodontitis , Probiotics , Sample Size , YogurtABSTRACT
The aim of this study is to examine the correlation between tooth wear and age by quantitatively measuring maxillary first molar wear in children. A total of 150 maxillary dental models were analyzed in 30 subjects (male, 11; female, 19) with an age range of 6–14 years. Maxillary first molar wear were assessed based on area, volume and the shortest distance from the buccal occlusal plane to the central pit point (BCPH). The area and volume of the tooth cusps were measured at four different offset-plane heights (0.2, 0.4, 0.6, and 0.8 mm). Relationship between age and the amount of wear or BCPH were statistically analyzed. Correlation and regression analyses were also performed, and age estimation was obtained with linear regression analysis. Repeated measures analysis of variance (ANOVA) revealed significant differences between age and the amount of wear based on area, volume, and offset-plane height. Except age of 8 and 10, 12 and 14's 0.2-mm offset-plane-measured volume, all area and volume measurement of all ages and offset-plane height showed a significant amount of increase. Wear speeds were calculated using the BCPH. Among age and measurement variables, the correlation coefficient was strongest when the volume was measured from the 0.4-mm offset-plane. As age increases, the amount of wear, as quantified by area and volume measurements, also increases. According to this study, a regression equation that can be used for age estimation is follows: Age (y)=0.16×0.4V+0.85 (R²=0.490) using volume.
Subject(s)
Child , Female , Humans , Models, Dental , Dental Occlusion , Linear Models , Longitudinal Studies , Molar , Tooth , Tooth WearABSTRACT
Tetrodes, consisting of four twisted micro-wires can simultaneously record the number of neurons in the brain. To improve the quality of neuronal activity detection, the tetrode tips should be modified to increase the surface area and lower the impedance properties. In this study, tetrode tips were modified by the electrodeposition of Au nanoparticles (AuNPs) and dextran (Dex) doped poly (3,4-ethylenedioxythiophene) (PEDOT). The electrochemical properties were measured using electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). A decrease in the impedance value from 4.3 MΩ to 13 kΩ at 1 kHz was achieved by the modified tetrodes. The cathodic charge storage capacity (CSC(C)) of AuNPs-PEDOT deposited tetrodes was 4.5 mC/cm², as determined by CV measurements. The tetrodes that were electroplated with AuNPs and PEDOT exhibited an increased surface area, which reduced the tetrode impedance. In vivo recording in the ventral posterior medial (VPM) nucleus of the thalamus was performed to investigate the single-unit activity in normal rats. To evaluate the recording performance of modified tetrodes, spontaneous spike signals were recorded. The values of the L-ratio, isolation distance and signal-to-noise (SNR) confirmed that electroplating the tetrode surface with AuNPs and PEDOT improved the recording performance, and these parameters could be used to effectively quantify the spikes of each cluster.
Subject(s)
Animals , Rats , Brain , Dextrans , Dielectric Spectroscopy , Electric Impedance , Electrodes , Electroplating , Microelectrodes , Nanoparticles , Neurons , ThalamusABSTRACT
PURPOSE: Clinicians must examine tooth wear to make a proper diagnosis. However, qualitative methods of measuring tooth wear have many disadvantages. Therefore, this study aimed to develop and evaluate quantitative parameters using the cusp area and volume of virtual dental models. METHODS: The subjects of this study were the same virtual models that were used in our former study. The same age group classification and new tooth wear index (NTWI) scoring system were also reused. A virtual occlusal plane was generated with the highest cusp points and lowered vertically from 0.2 to 0.8 mm to create offset planes. The area and volume of each cusp was then measured and added together. In addition to the former analysis, the differential features of each cusp were analyzed. RESULTS: The scores of the new parameters differentiated the age and NTWI groups better than those analyzed in the former study. The Spearman ρ coefficients between the total area and the area of each cusp also showed higher scores at the levels of 0.6 mm (0.6A) and 0.8A. The mesiolingual cusp (MLC) showed a statistically significant difference (P < 0.01) from the other cusps in the paired t-test. Additionally, the MLC exhibited the highest percentage of change at 0.6A in some age and NTWI groups. Regarding the age groups, the MLC showed the highest score in groups 1 and 2. For the NTWI groups, the MLC was not significantly different in groups 3 and 4. These results support the proposal that the lingual cusp exhibits rapid wear because it serves as a functional cusp. CONCLUSIONS: Although this study has limitations due to its cross-sectional nature, it suggests better quantitative parameters and analytical tools for the characteristics of cusp wear.
Subject(s)
Humans , Classification , Models, Dental , Dental Occlusion , Diagnosis , Methods , Models, Statistical , Tooth Wear , ToothABSTRACT
OBJECTIVE: The aim of this study was to compare the initial stability as insertion and removal torque and the clinical applicability of novel orthodontic zirconia micro-implants made using a powder injection molding (PIM) technique with those parameters in conventional titanium micro-implants. METHODS: Sixty zirconia and 60 titanium micro-implants of similar design (diameter, 1.6 mm; length, 8.0 mm) were inserted perpendicularly in solid polyurethane foam with varying densities of 20 pounds per cubic foot (pcf), 30 pcf, and 40 pcf. Primary stability was measured as maximum insertion torque (MIT) and maximum removal torque (MRT). To investigate clinical applicability, compressive and tensile forces were recorded at 0.01, 0.02, and 0.03 mm displacement of the implants at angles of 0°, 10°, 20°, 30°, and 40°. The biocompatibility of zirconia micro-implants was assessed via an experimental animal study. RESULTS: There were no statistically significant differences between zirconia micro-implants and titanium alloy implants with regard to MIT, MRT, or the amount of movement in the angulated lateral displacement test. As angulation increased, the mean compressive and tensile forces required to displace both types of micro-implants increased substantially at all distances. The average bone-to-implant contact ratio of prototype zirconia micro-implants was 56.88 ± 6.72%. CONCLUSIONS: Zirconia micro-implants showed initial stability and clinical applicability for diverse orthodontic treatments comparable to that of titanium micro-implants under compressive and tensile forces.
Subject(s)
Animals , Alloys , Foot , Fungi , Polyurethanes , Titanium , TorqueABSTRACT
OBJECTIVE: The purpose of this study was to evaluate the dental and skeletal effects of the modified C-palatal plate (MCPP) for total arch distalization in adult patients with Class II malocclusion and compare the findings with those of cervical pull headgear. METHODS: The study sample consisted of the lateral cephalograms of 44 adult patients with Class II Division 1 malocclusion, including 22 who received treatment with MCPP (age, 24.7 ± 7.7 years) and 22 who received treatment with cervical pull headgear (age, 23.0 ± 7.7 years). Pre- (T1) and post-treatment (T2) cephalograms were analyzed for 24 linear and angular measurements. Multivariate analysis of variance was performed to evaluate the changes after treatment in each group and differences in treatment effects between the two groups. RESULTS: The mean amount of distalization at the crown and root levels of the maxillary first molar and the amount of distal tipping was 4.2 mm, 3.5 mm, and 3.9° in the MCPP group, and 2.3 mm, 0.6 mm, and 8.6° in the headgear group, respectively. In addition, intrusion by 2.5 mm was observed in the MCPP group. In both groups, the distal movement of the upper lip and the increase in the nasolabial angle were statistically significant (p < 0.001). However, none of the skeletal and soft tissue variables exhibited significant differences between the two groups. CONCLUSIONS: The results of this study suggest that MCPP is an effective treatment modality for total arch distalization in adults.
Subject(s)
Adult , Humans , Crowns , Lip , Malocclusion , Molar , Multivariate AnalysisABSTRACT
Obstructive hydrocephalus caused by tectal glioma, which relived by neuroendoscopy, have been described using 3.0 Tesla magnetic resonance imaging (3T MRI) so far, we present the results obtained from 3T and 7T MRI in this patient. A 21-year-old woman presented at our hospital with gait disturbance, hormonal insufficiency, and urinary incontinence that began prior to 6 years of age. 3.0T MRI revealed a non-enhancing tectal mass along with obstructive hydrocephalus. The mass measured approximately 1.1×1.0×1.2 cm. An endoscopic third ventriculostomy was performed to relieve the hydrocephalus. We compared hydrocephalus and cerebrospinal fluid (CSF) flow findings from 3T and 7T MRI, both preoperative and postoperative at 1, 6 months. Intraventricular CSF voiding on T2-weighted images obtained with 7T MRI showed greater fluid inversion than those obtained with 3T MRI. This study shows that 7T brain MRI can provide detailed information on hydrocephalus caused by tectal glioma. Further studies are needed to develop refined 7T MRI protocols for better images of hydrocephalus.
Subject(s)
Female , Humans , Young Adult , Brain , Brain Neoplasms , Cerebrospinal Fluid , Gait , Glioma , Hydrocephalus , Magnetic Resonance Imaging , Neuroendoscopy , Urinary Incontinence , VentriculostomyABSTRACT
OBJECTIVE: The aim of the present study is to estimate the incidence trend of head injury and the mortality based on traffic accident statistics and to investigate the impacts of rapid industrialization and economic growth on epidemiology of head injury in Korea over the period 1970-2012 including both pre-industrialized and post-industrialized stages. METHODS: We collected data of head injury estimated from traffic accident statistics and seven hospital based reports to see incidence trends between 1970 and 2012. We also investigated the population structure and Gross National Income (GNI) per capita of Korea over the same period. The age specific data were investigated from 1992 to 2012. RESULTS: The incidence of head injury gradually rose in the 1970s and the 1980s but stabilized until the 1990s with transient rise and then started to decline slowly in the 2000s. The mortality grew until 1991 but gradually declined ever since. However, the old age groups showed rather slight increase in both rates. The degree of decrease in the mortality has been more rapid than the incidence on head injury. CONCLUSION: In Korea during the low income stage, rapid industrialization cause considerable increase in the mortality and the incidence of head injury. During the high income stage, the incidence of head injury gradually declined and the mortality dropped more rapidly than the incidence due to preventive measures and satisfactory medical care. Nevertheless, the old age groups revealed rather slight increase in both rates owing to the large population structure and the declining birth rate.
Subject(s)
Humans , Accidents, Traffic , Birth Rate , Craniocerebral Trauma , Economic Development , Epidemiology , Head , Incidence , Korea , Mortality , Industrial DevelopmentABSTRACT
Moyamoya disease (MMD) is a chronic, progressive, cerebrovascular occlusive disorder that displays various clinical features and results in cerebral infarct or hemorrhagic stroke. Specific genes associated with the disease have not yet been identified, making identification of at-risk patients difficult before clinical manifestation. Familial MMD is not uncommon, with as many as 15% of MMD patients having a family history of the disease, suggesting a genetic etiology. Studies of single nucleotide polymorphisms (SNPs) in MMD have mostly focused on mechanical stress on vessels, endothelium, and the relationship to atherosclerosis. In this review, we discuss SNPs studies targeting the genetic etiology of MMD. Genetic analyses in familial MMD and genome-wide association studies represent promising strategies for elucidating the pathophysiology of this condition. This review also discusses future research directions, not only to offer new insights into the origin of MMD, but also to enhance our understanding of the genetic aspects of MMD. There have been several SNP studies of MMD. Current SNP studies suggest a genetic contribution to MMD, but further reliable and replicable data are needed. A large cohort or family-based design would be important. Modern SNP studies of MMD depend on novel genetic, experimental, and database methods that will hopefully hasten the arrival of a consensus conclusion.
Subject(s)
Humans , Atherosclerosis , Cohort Studies , Consensus , Endothelium , Genome-Wide Association Study , Moyamoya Disease , Polymorphism, Single Nucleotide , Stress, Mechanical , StrokeABSTRACT
We report on a case of an 87-year-old woman who showed spontaneous resolution of a large chronic subdural hematoma which required surgical decompression. She had suffered from confused mentality and right side weakness of motor grade II for 10 days. The initial brain CT scan showed a 22 mm thick low density lesion located in the left fronto-temporo-parietal region with midline shift (12 mm) which required emergency decompression. However, because she and her family did not want surgery, she was followed up in the outpatient clinic. Five months later, follow up brain CT showed that the CSDH had disappeared and the patient became neurologically normal. The reasons for spontaneous resolution of CSDH remain unclear. We discuss the possible relation between mechanisms of physio-pathogenesis and spontaneous resolution of a large chronic subdural hematoma (CSH) in an elderly patient.
Subject(s)
Aged , Aged, 80 and over , Female , Humans , Ambulatory Care Facilities , Brain , Craniotomy , Decompression , Decompression, Surgical , Emergencies , Follow-Up Studies , Hematoma, Subdural, Chronic , Tomography, X-Ray ComputedABSTRACT
Although blood contamination of cerebrospinal fluid (CSF) after an intracranial operation can occur, the development of a symptomatic spinal hematoma after craniotomy has been anecdotally reported and it is uncommon reported after a supratentorial meningioma removal operation. We report a case of spinal subdural hematoma following a supratentorial meningioma removal operation and discuss the mechanism of spinal subdural hematoma (SSDH) development. A 54-year-old woman presented with lumbago and radicular pain on both legs 4 days after a right parietooccipital craniotomy for meningioma removal. Only the straight leg raising sign was positive on neurologic examination but the magnetic resonance imaging (MRI) demonstrated a lumbosacral spinal subdural hematoma. The patient received serial lumbar tapping, after which her symptoms showed improvement.
Subject(s)
Female , Humans , Middle Aged , Cerebrospinal Fluid , Craniotomy , Hematoma , Hematoma, Subdural, Spinal , Leg , Low Back Pain , Magnetic Resonance Imaging , Meningioma , Neurologic ExaminationABSTRACT
PURPOSE: This study evaluated the efficacy of alveolar ridge preservation methods with and without primary wound closure and the relationship between histometric and micro-computed tomographic (CT) data. MATERIALS AND METHODS: Porcine hydroxyapatite with polytetrafluoroethylene membrane was implanted into a canine extraction socket. The density of the total mineralized tissue, remaining hydroxyapatite, and new bone was analyzed by histometry and micro-CT. The statistical association between these methods was evaluated. RESULTS: Histometry and micro-CT showed that the group which underwent alveolar preservation without primary wound closure had significantly higher new bone density than the group with primary wound closure (P<0.05). However, there was no significant association between the data from histometry and micro-CT analysis. CONCLUSION: These results suggest that alveolar ridge preservation without primary wound closure enhanced new bone formation more effectively than that with primary wound closure. Further investigation is needed with respect to the comparison of histometry and micro-CT analysis.
Subject(s)
Alveolar Process , Bone Density , Bone Substitutes , Durapatite , Membranes , Osteogenesis , Polytetrafluoroethylene , Wounds and InjuriesABSTRACT
OBJECTIVE: We aimed to investigate the effects of silanation time on the shear bond strength (SBS) of metal brackets on gold alloy in a silicoating procedure and compare the SBS of metal brackets on gold alloy and enamel. METHODS: Type III gold alloy plates were sandblasted with 30-microm silicon dioxide. Excess particles were removed with gentle air after silica coating, and silane was applied. Maxillary central-incisor metal brackets were bonded to each conditioned alloy surface with a light curing resin adhesive for 1 s, 30 s, 60 s, or 120 s after applying silane. The brackets were also bonded to 36 upper central incisors with the same adhesive. All samples were cured for 40 s with a light emitting diode curing light. The SBS was tested after 1 h and after 24 h. The adhesive remnant index (ARI) of the samples was also compared. RESULTS: The 60-s and 120-s silanation time groups showed a higher SBS than the other groups (p < 0.05). Samples tested after 24 h showed a significantly higher SBS than did the samples tested after 1 h (p < 0.05). The 1-s group showed higher ARI scores. The one-way analysis of variance and Student-Newman-Keuls test showed that the SBS values of the 60-s and 120-s silanation time groups were not significantly different from the SBS values of enamel. CONCLUSIONS: Adequate silanation time is required to produce sufficient bond strength during silicoating.