ABSTRACT
Objective:To evaluate the curative effects of 3D printed microporous titanium (tantalum) prosthesis in reconstruction of large segmental bone defects caused by lower extremity osteomyelitis.Methods:A retrospective study was conducted to analyze the clinical data of 18 patients who had been treated for large segmental bone defects caused by lower extremity osteomyelitis between January 2020 to May 2022 at Department of Orthopaedics, The 920th Hospital of Joint Logistics Support Force. There were 10 males and 8 females with an age of (45.3±14.1) years. The defects were at the left side in 13 cases and at the right side in 5 cases, at the femur in 11 cases and at the tibia in 7 cases. The duration of osteomyelitis was 1.0 (1.0, 3.5) years. The length of bone defects was 8.35 (6.50, 9.84) cm. Their bone defects were repaired by an individually 3D printed microporous titanium (tantalum) prosthesis after operative removal of osteomyelitis lesions. The wound healing was observed after surgery. The clinical efficacy was comprehensively evaluated by the Paley grading for bone defect healing, visual analog scale (VAS), lower extremity functional scale (LEFS), and imaging examination.Results:The postoperative follow-up period for the 18 patients was (12.2±0.3) months. Wound infection occurred 2 months after surgery in one patient who was treated with Ilizarov bone transfer after removal of the microporous titanium prosthesis. The remaining 17 patients had good postoperative wound healing. At the last follow-up, the 18 patients had a VAS pain score of 2.0(1.0, 4.0) points, significantly lower than the preoperative one [(6.1±2.3) points], and a LEFS score of 54.00(34.50, 69.25) points, significantly higher than the preoperative one [18.50(9.00, 26.50) points] ( P<0.05). At the last follow-up, according to the Paley grading, the bone union was rated as excellent in 16 patients, as good in 1 patient and as poor in 1 patient. The integration of femoral fractures with 3D printed microporous titanium prostheses was fine. Conclusion:In reconstruction of large segmental bone defects caused by lower extremity osteomyelitis, implantation of a 3D printed microporous titanium (tantalum) prosthesis is feasible and effective, not only reducing pain but also restoring the limb function.
ABSTRACT
Objective:To analyze the clinical efficacy of bone transport with unilateral external fixation in the treatment of massive tibial bone defects.Methods:A retrospective study was conducted to review the 21 patients with massive tibial bone defects who had been treated by bone transport with unilateral external fixation from February 2017 to January 2022 at Department of Trauma Orthopedics, Ganzhou People's Hospital. There were 14 males and 7 females with a mean age of (46.3 ± 11.3) years. Causes for bone defects: trauma ( n=5), resection of bone non-union ( n=9), resection of infected bone ( n=6) and resection of bone tumor ( n=1). The mean bone defect length was (8.3 ± 1.7) cm. Bone transport started from 10 to 12 days after operation, with a speed of 1 mm/d, and was completed in 4 times. X-ray films were reviewed every 2 weeks. The bone union time, external fixation time (EFT), external fixation index (EFI), docking site situation and complications were recorded. The clinical efficacy was assessed by Paley score. Results:All patients were followed-up for a mean time of (13.5 ± 5.5) months. The mineralization of regenerated bone was good. The bone union time was (9.6 ± 2.2) months, the EFT (10.3 ± 4.0) months, and the EFI (1.3 ± 0.4) months/cm. All docking sites got united. The docking sites were cleaned in 14 patients, of whom simple compression with external fixation was performed in 5 and bone grafts at the docking sites in 9. Postoperative nail tract infection was observed in 6 cases, tibial alignment deviation in 1 case, foot drop deformity in 5 cases, horseshoe varus foot deformity in 1 case, toe flexion deformity in 3 cases, and refracture after removing the external fixation in 1 case. By the Paley score, the bony outcomes were rated as excellent in 16 and as good in 5 cases. The functional outcomes were excellent in 10, good in 7, and acceptable in 4.Conclusion:Bone transport with unilateral external fixation is an effective treatment for massive tibial bone defects, showing advantages of easy operation and convenient carry.
ABSTRACT
Bone defects are mostly caused by severe trauma, infection, tumor resection and congenital malformations, which adversely affect their health and quality of life. So far, the bone defects are mainly filled with autologous or allogeneic bone grafting, which has problems such as donor shortage, secondary bone injury and scarring. In recent years, the rise of bone tissue engineering has provided a new way for repair of bone defects, in which mesenchymal stem cell (MSC) sheets prepared by using the principle of tissue engineering can well solve the above problems of autologous or allogeneic bone grafting. With the development of preparation technology, new bone defect repair materials such as decellularized extracellular matrix (ECM) sheets and MSC/ECM clumps have been derived on the basis of MSC sheets. Therefore, the authors reviewed the preparation and the role of MSC sheets and their derivatives in bone defect repair, hoping to provide a reference for basic research and clinical treatment related to bone defect repair.
ABSTRACT
Objective:To evaluate the treatment of infected nonunion after internal fixation of subtrochanteric fracture with a reconstruction stent of external fixation.Methods:A retrospective study was conducted to analyze the data of 5 male patients with infected nonunion after internal fixation of subtrochanteric fracture who had been treated and completely followed up at The Great Wall Orthopaedics and Hand Surgery Hospital from January 2017 to October 2022. The patients were (30.0±13.5) years old. Seinsheimer fracture types: ⅢA (1 case), ⅢB (1 case), Ⅳ (2 cases), and Ⅴ (1 case); original internal fixation: intramedullary system (4 cases) and plate fixation (1 case); the Cierny-Mader anatomical classification: type Ⅳ (diffuse type) for all. After complete debridement at stage one, 2 or 3 hydroxyapatite (HA) coated screws were placed at both fracture ends from the lateral side of the femur for unilateral reconstruction external fixation. Next, a hybrid external fixation scaffold was added with a 1/3 ring at the sagittal position and 1 or 2 HA screws in 4 cases while unilateral reconstruction external fixation was constructed at both sides by inserting 2 HA screws into both fracture ends from the anterior femur at the sagittal position in 1 case. Antibiotic bone cement was used to fill bone defects of (3.8±1.8) cm. At 6 to 8 weeks after debridement when infection did not recur, antibiotic bone cement was removed before autogenous iliac bone grafting was performed in 3 patients and osteotomy bone transport in 2 patients. Infection control, bone union time, time for removal of external fixation stent, complications, Sanders hip function score and Paley bone outcome score were recorded.Results:The 5 patients were followed up for (23.4±8.1) months after surgery. Infection at the fracture ends was controlled after 1 time of debridement in 3 patients and after 2 times of debridement in 2 patients. The loosening HA screws were replaced twice due to infection at the proximal nail tract, and autologous bone grafting was performed at the opposite fracture ends in 1 case; no complications occurred in the other 4 cases. Bony union was achieved at the extended segment and fracture ends in all patients. The time for imaging union after bone reconstruction was (10.2±3.4) months. The time for wearing a stent of external fixation was (18.0±4.5) months. There was no recurrent infection or lingering infection. According to the Sanders hip function score at the last follow-up, 4 cases were excellent and 1 case was good; according to the Paley bone outcome score, the curative effect was excellent in all.Conclusion:Application of a reconstruction stent of external fixation combined with antibiotic bone cement can control infection at the first stage and conduct bone reconstruction at the second stage to successfully treat the infected nonunion and preserve the hip function after internal fixation of subtrochanteric fracture.
ABSTRACT
Objective:To compare the clinical efficacy between bone transport technique combined with bone grafting plus internal fixation and simple bone transport technique in the treatment of large segmental bone defects at lower limbs after trauma.Methods:A retrospective study was conducted to analyze the clinical data of 42 patients with large segmental bone defects at lower limbs after trauma who had been treated at Department of Trauma Orthopaedics, Honghui Hospital Affiliated to Medicine College, Xi'an Jiaotong University from September 2015 to September 2019. The patients were divided into 2 groups according to the different methods of repairing bone defects. In group A of 18 patients subjected to bone transport combined with bone grafting plus internal fixation, there were 11 males and 7 females with an age of (35.2±10.3) years, and 12 tibial defects and 6 femoral defects; in group B of 24 patients subjected to simple bone transport, there were 15 males and 9 females with an age of (37.3±9.4) years, and 17 tibial defects and 7 femoral defects. The external fixation time (EFT), external fixation index (EFI), total cure time and complications were recorded and compared between the 2 groups. At the last follow-up, the Ennecking score for limb functional recovery (score/total score 30) and Self-rating Anxiety Scale (SAS) were used to evaluate respectively the functional recovery of the limbs and postoperative anxiety.Results:The 2 groups were comparable because there was no significant difference between them in preoperative general data or follow-up time ( P>0.05). There was no statistically significant difference in the number of surgeries between the 2 groups ( P>0.05). The EFT [(5.9±1.5) months], EFI [(0.45±0.09) months/cm], total treatment time [(16.2±2.4) months], Ennecking score for limb functional recovery (87.0%±8.6%), SAS score [(43.2±9.0) points], and complications per capita [(0.4±0.2) times/case] in group A were significantly better than those in group B [(15.3±4.2) months, (1.19±0.28) months/cm, (19.7±3.5) months, (77.3%±9.2%), (58.2±9.3) points, and (1.2±0.5) times/case] (all P<0.05). Conclusion:In the treatment of large segmental bone defects at lower limbs, compared with simple bone transport technique, bone transport technique combined with bone grafting plus internal fixation has advantages of shorter external fixation time and overall cure time, a lower rate of complications, and better functional recovery of the limbs.
ABSTRACT
Objective:To evaluate the efficacy of 3D printed patients-specific guide plates in assisting Ilizarov bone transport in the treatment of tibial bone defects.Methods:A retrospective study was conducted to analyze the clinical data of 24 patients with tibial bone defects who had been admitted to Institute of Trauma Orthopedics, The 80th Army Group Hospital of PLA from January 2018 to March 2022. There were 9 males and 15 females with an age of (49.8±6.5) years, and 4 upper tibial defects, 5 middle tibial defects, and 15 lower tibial defects. According to the methods of repairing bone defects, the patients were divided into 2 groups: a 3D printing group of 10 cases where a 3D printed patient-specific guide plate was used to assist Ilizarov bone transport in the treatment of tibial bone defects, and a traditional group of 14 cases where Ilizarov bone transport was performed in a traditional manner. The 2 groups were compared in terms of operation time, frequency of intraoperative fluoroscopy, axial angulation of the tibia at postoperation and the last follow-up, external fixation time (EFT) and external fixation index (EFI). At the last follow-up, healing of bone defects was evaluated according to the criteria of The Association for the Study and Application of the Method of Ilizarov (ASAMI), functional outcomes were evaluated according to the Paley criteria, and needle infection was recorded according to the Paley classification for complications.Results:There was no statistically significant difference in the preoperative general data between the 2 groups, indicating comparability ( P>0.05). All patients were followed up for (11.3±2.0) months on average after operation. The 3D printing group had significantly shorter operation time [(19.9±2.6) min] and significantly lower frequency of intraoperative fluoroscopy [(3.0±0.8) times] than the traditional group [(38.1±2.2) min and (8.9±1.3) times] (P<0.05), and had significantly better axial angulation of the tibia at postoperation and the last follow-up than the traditional group ( P<0.05). There was no significant difference in EFT or EFI between the 2 groups ( P>0.05), and the last follow-up revealed no significant difference either in bone healing, functional outcomes, or needle infection between the 2 groups ( P>0.05). Conclusion:In the treatment of tibial bone defects, compared with conventional Ilizarov bone transport, the Ilizarov bone transport assisted by a 3D printed patient-specific guide plate demonstrates advantages of shorter operation time, lower intraoperative fluoroscopy, and higher reduction accuracy.
ABSTRACT
Objective:To investigate the efficacy of Masquelet induced membrane technique combined with an external locking plate in the treatment of infectious bone defects of the tibia.Methods:A retrospective study was conducted to analyze the data of 32 patients with infectious bone defects of the tibia who had been treated by Masquelet induced membrane technique combined with an external locking plate at Department of Orthopaedic Surgery, The Fourth Hospital of Wuhan from January 2011 to January 2021. There were 22 males and 10 females, with an age of (43.2±13.1) years. The length of bone defects was (5.1±1.3) cm. By the Cierny-Mader classification, there were 12 cases of type Ⅲ and 20 cases of type Ⅳ. The defects were located at the proximal tibia in 11 cases, at the middle tibia in 12, and at the distal tibia in 9. At the last follow-up, the lower limb function was evaluated by the Paley scale, and the quality of life by the 36-Item Short Form Health Survey (SF-36).Results:All the 32 patients were followed up for (21.2±5.7) months. Normal healing was achieved in 30 cases but delayed healing occurred in 2 cases. The external plate and screws were removed at (23.1±4.6) weeks after operation. There was no infection in the original surgical incision or no injury to the nerve, blood vessel or tendon after operation, but nail tract infection occurred more or less in 3 cases. According to the Paley scale at the last follow-up, the lower limb function was evaluated as excellent in 22 cases, as good in 8, and as fair in 2, giving an excellent and good rate of 93.75% (30/32). The SF-36 quality of life score was (88.9±3.8) points.Conclusion:In the treatment of infectious bone defects of the tibia, Masquelet induced membrane technique combined with an external locking plate can achieve satisfactory clinical outcomes due to its effective control of infection, reduction in delayed healing, good stability and good patient tolerance.
ABSTRACT
@#Tooth loss is accompanied by alveolar bone absorption or defect, resulting in insufficient bone and soft tissue. In addition to restoring the masticatory function of missing teeth, implant treatment should also needs to restore the contour and shape of the dental arch. Guided bone regeneration is a common means of bone increase. Xenogeneic granular bone substitute materials are widely used in the field of clinical bone augmentation due to their advantages of long degradation time and low immunogenicity, but other problems, such as inconvenient operation and low osteogenic activity, remain. Plasmatrix can effectively improve the effect of oral tissue regeneration and reduce the occurrence of postoperative complications, and its application in oral tissue regeneration is gradually increasing. This article first introduces the main application forms of plasmatrix in horizontal bone augmentation (mainly solid plasmatrix membrane and plasmatrix bone block), and reclassifies horizontal bone defects according to commonly used decision-making schemes in clinical bone augmentation, in other words, whether the implant can be placed in the ideal position and whether there is bone dehiscence after implantation. Type Ⅰ defects refers to the situation where the bone at the implant site can allow the insertion of an implant with ideal size, and there is no bone dehiscence around the implant, but the alveolar bone contour is not ideal; type Ⅱ defects refers to the situation that when an ideal size implant is placed at the implant site determined by the future prosthesis position, there will be bones on three sides of the implant, but there is bone dehiscence in the buccal bone wall (the length of bone dehiscence is less than 50% of the implant length); type Ⅲ defects refers to the situation where the bone volume at the implant site is not enough to for the placement of the ideal size implant at the ideal position, and bone grafting is required to restore the bone volume before the implant placement. The application of plasmatrix in different types of bone defects is then described. In type Ⅰ bone defects, the solid plasmatrix membrane is used instead of the collagen membrane; in type Ⅱ bone defects, the bone defect around the implant is filled by plasmatrix bone block and then covered with collagen membrane and solid plasmatrix membrane; and in type Ⅲ bone defects, plasmatrix bone block is used to replace autogenous bone block to fill the defect area, and titanium screws are used for fixation. The defect is then covered with a collagen membrane and a solid plasmatrix membrane. This article aims to provide oral clinicians with a comprehensive understanding of plasmatrix and simplify the guidelines for bone regeneration operations.
ABSTRACT
@#The reconstruction effect of peri-implantitis bone defects depends on their morphological characteristics. This paper reviews the morphological classification and treatment of peri-implantitis bone defects. A literature review shows that the morphological classification of bone defects in peri-implantitis includes morphology classification and clinical classification. At present, the Renvert classification is more commonly used in the clinic and is divided into four-wall bone pockets, three-wall bone pockets, two-wall bone pockets, one-wall bone pocket and dehiscence according to the number of bone walls. This has guiding significance in the treatment plan of peri-implantitis. The treatment of peri-implantitis depends on the severity of peri-implant bone defects. Peri-implantitis with mild bone defects is treated by nonsurgical treatment, peri-implantitis with severe bone defects is recommended to remove the implant, and peri-implantitis with moderate bone defects is further judged according to the shape of the bone defects. Four-wall bone pockets, three-wall bone pockets and dehiscence are mostly treated by bone regenerative surgery. For shallow two-wall bone pockets, one-wall bone pockets and horizontal bone resorption, bone resection is often used. However, most peri-implantitis has a variety of bone defect forms at the same time, which need to be treated with bone regenerative surgery and bone resection surgery.
ABSTRACT
Objective:To investigate the risk factors for axial deviation in the treatment of tibial defect susing Orthofix unilateral external fixator and proximal tibial osteotomy for bone transport.Methods:A retrospective study was performed to analyze the clinical data of 90 patients who had been treated for tibial bone defects by the Orthofix unilateral external fixator at Department of Microrepair and Reconstruction, The First Hospital Affiliated to Xinjiang Medical University from May 2012 to June 2019. There were 77 males and 13 females with a mean age of 41.2 years (from 17 to 63 years).The bone defects ranged from 4 to 13 cm in length. According to the Paley criteria for axial deviation, the 90 patients were divided into 2 groups: a deviation-free group with no axial deviation or an axial deviation ≤5° and a deviation group with an axial deviation>5°. The 2 groups were compared in terms of age, number of prior surgery, defect length, placement angle of Schanz screws, external fixation time, external fixation index and bending degree of Schanz screws at the last follow-up.The factors with P<0.05 were analyzed by multivariate logistic regression to find the risk factors for coronal axial deviation. Results:The 90 patients were followed up for an average of 23 months (from 12 to 40 months). The incidence of axial deviation in this cohort was 36.7% (33/90).The deviation group had a significantly larger number of prior surgery [5 (3, 6) times], a significantly longer defect length [8 (8, 9) cm], a significantly longer external fixation time [400.0 (341.8, 426.3) d], and a significantly greater bending degree of Schanz screws at the last follow-up [1.2° (0.4°, 3.5°)] than the deviation-free group [3 (2, 3) times, 6 (5, 8) cm, 340.8 (226.5, 422.8) d, and 0.8° (0.2°, 3.7°)] (all P<0.05). Multivariate logistic regression analysis showed that the number of prior surgery ( OR=2.581, 95% CI: 1.496-4.450, P=0.001) and the defect length ( OR=5.310, 95% CI: 1.952-14.442, P=0.001) were the risk factors for the axial deviation. Conclusion:In the treatment of tibial defect susing Orthofix unilateral external fixator and proximal tibial osteotomy for bone transport, the more prior surgeries and the longer a bone defect, the higher the risk for axial deviation.
ABSTRACT
Objective:To explore the short-term outcomes of reconstruction of tumorous critical bone defects at femoral shaft with a 3D printed ultra-short stem with a porous structure.Methods:From September 2016 to June 2018, 8 patients underwent reconstruction of critical bone defects with a 3D printed ultra-short stem with a porous structure after resection of femoral shaft malignant tumor at Department of Orthopaedics, West China Hospital. There were 4 males and 4 females, with an average age of 36.9 years (from 11 to 61 years). Their preoperative Enneking staging was stage Ⅱb in all. There were 3 osteosarcomas, 2 Ewing sarcomas, 2 chondrosarcomas and one periosteal osteosarcoma. Preoperative CT/MRI image fusion technology was used to define the surgical boundary, design the guide plate and prosthesis, and perform surgical simulation. Tomosynthesis-shimadzu Metal Artefact Reduction technology was used to evaluate osseointegration. Complications and bone oncology prognosis of the patients were documented. The lower limb function of the patients was evaluated using Musculoskeletal Tumor Society (MSTS) 1993 scoring and knee range of motion.Results:The overall follow-up time ranged from 36 to 50 months, averaging 42.8 months. During operation one patient sustained a periprosthesis fracture, the union of which was followed up after wire assisted fixation. There was no local tumor recurrence, lung metastasis or death. The last follow-up revealed good osseointegration and basically isometric lower extremities in all cases. There was no such a complication as aseptic loosening of the prosthesis, deep infection or prosthesis fracture during the follow-up period. At the last follow-up in the 8 patients, the flexion range of the knee joint was 116.2°±9.1°, significantly improved compared with that before operation (98.8°±10.9°), and the MSTS score was (26.2±2.1) points, also significantly improved compared with that before operation [(21.6±1.8) points] ( P<0.05). Conclusions:Reconstruction with a 3D printed ultra-short stem with a porous structure is an accurate operation for femoral shaft tumorous bone defects. With careful preoperative design, intraoperative manipulation and strict postoperative follow-up management, this operation can lead to fine early curative outcomes for long shaft critical bone defects.
ABSTRACT
Objective:To evaluate biplane osteotomy and bone transport combined external locking plating for sequential treatment of massive tibial bone defects.Methods:Twenty-eight patients with massive tibial bone defects were reviewed who had been treated at Department of Repair and Reconstruction, Wuhan Puai Hospital from October 2013 to October 2019. They were divided into a bone transport group and a combined bone transport group (bone transport combined external locking plating) according to their surgical methods. In the bone transport group of 14 cases, there were 10 males and 4 females with an age of (38.6±3.2) years and a bone defect of (8.0±0.5) cm; in the combined bone transport group of 14 cases, there were 9 males and 5 females with an age of (39.1±3.9) years and a bone defect of (8.3±0.3) cm. The time for wearing external fixator, fracture healing time, dock-in-site healing time, postoperative function assessment and complications were observed and compared between the 2 groups.Results:There was no significant difference between the 2 groups in their preoperative general data, showing they were comparable ( P>0.05). The bone transport group were followed up for 12 to 28 months (average, 18.4 months) and the combined bone transport group for 12 to 26 months (average, 16.8 months). The time for wearing external fixator in the combined bone transport group [(8.4±0.7) months] was significantly shorter than that [(13.3±1.4) months] in the bone transport group ( P<0.05). No significant difference was observed between the 2 groups in either the fracture healing time [(8.4±1.3) months versus (7.4±1.2) months] or the dock-in-site healing time [(210.2±9.1) months versus (206.2±9.8) months] ( P>0.05). By the Association for the Study and Application of the Method of Ilizarov (ASAMI) scoring, the bone healing was excellent in 6, good in 5 and fair in 3 cases in the bone transport group while excellent in 8, good in 4 and fair in 2 cases in the combined bone transport group, showing no significant difference between the 2 groups in the excellent to good rate ( P>0.05). By the postoperative functional assessment of the lower extremity, there were 7 excellent, 3 good, 3 fair and one poor cases in the bone transport group while 8 excellent, 5 good and one poor cases in the combined bone transport group, showing no significant difference between the 2 groups in the excellent to good rate ( P>0.05). In the bone transport group, there were 3 cases of pin track infection, one case of dock-in-site nonunion, 2 cases of poor alignment of lower extremities, 2 cases of skin depression, one case of nail loosening, 5 cases of joint stiffness and 3 cases of delayed union of the distracted bone; in the combined bone transport group, there were one case of pin track infection, 2 cases of poor alignment of lower extremities, 3 cases of skin depression, 3 cases of joint stiffness, 2 cases of delayed union of the distracted bone and one case of refracture. Conclusion:In the sequential treatment of massive tibial bone defects, biplane osteotomy and bone transport combined external locking plating can reduce the time for wearing external fixator and increase the satisfaction of patients.
ABSTRACT
@#Vertical bone augmentation surgery still faces considerable challenges in clinical practice due to various problems, such as difficulty in restoring the ideal alveolar bone height and biological complications, and because it is highly technically sensitive. Plasmatrix is derived from patients’ own blood, and it can effectively promote the vascularization of the regenerated area, recruit stem cells, and reduce inflammation when used in vertical bone augmentation. Based on studies published worldwide, this article first divides vertical bone augmentation into 3 categories according to the height of the expected alveolar ridge, namely, type Ⅰ, the required vertical bone gain is less than 4 mm; type Ⅱ, the required vertical bone gain is between 4-8 mm; and type Ⅲ, the required vertical bone gain is greater than 8 mm. In the type Ⅰ vertical bone augmentation, the plasmatrix bone block is directly placed in the defect area and covered with the plasmatrix membrane before tension-free suturing; in the type Ⅱ vertical bone augmentation, the plasmatrix bone block should be placed in the defect area and fixed with titanium nails and then covered with an absorbable collagen membrane and plasmatrix membrane with a tension-free suture; in the type Ⅲ vertical bone augmentation, additional active ingredients (such as bone morphogenetic protein, autologous bone, etc.) should be added to the plasmatrix bone block and strong fixation (such as titanium nails) should be used. Absorbable collagen and plasmatrix membranes should be used to cover the surface of the bone block, and the flap should be sutured. According to different types of vertical bone augmentation categories, the above methods optimize the vertical bone augmentation effect. This article aims to provide a reference and guidelines for oral clinicians to fully understand plasmatrix and simplify the classification and operation of vertical bone augmentation.
ABSTRACT
OBJECTIVE@#To investigate the effect of RUNX2 gene overexpression vector modified exosomes derived from bone marrow mesenchymal stem cells (BMSCs) combined with calcium carbonate scaffold system in bone defect.@*METHODS@#Rabbit BMSCs were used as the research object, and BMSCs were identified by flow cytometry. Construct RUNX2 gene overexpression vector, transfect BMSCs with lentivirus, and collect exosomes by ultracentrifugation. The morphology of exosomes was observed by transmission electron microscope, the expression of exosome marker CD63 was detected by Western blot, and the calcium carbonate scaffold was constructed by three chamber parallel automatic temperature control reaction system. According to whether the RUNX2 gene overexpression vector was transfected or not, the complex of BMSCs and calcium carbonate scaffold was divided into three groups, namely BMSCs group, RUNX2 overexpression group and exosome group. The osteogenic differentiation of BMSCs was detected by oil red O staining and RT-PCR. There were 9 clean adult healthy male New Zealand white rabbits, aged (12.97±1.21) months, with a body weight of (19.3±3.6) kg, with 3 rabbits in each group. The animal model of skull defect was constructed by surgical method, and the repair of bone defect was evaluated by imaging, he staining and Masson staining.@*RESULTS@#The results of flow cytometry showed that the expression of CD29 protein, CD44 protein, CD11b protein and CD45 protein on the surface of BMSCs were 99.5%, 100%, 0.1% and 0.1%, respectively. Transmission electron microscopy showed that the exosomes were bilayer vesicles with a diameter of 50 to 150 nm. Western blot showed that the molecular marker CD63 of exosomes was positive. Oil red O staining showed that the osteogenic differentiation of BMSCs in exosome group was significantly higher than that in RUNX2 overexpression group and BMSCs group. The results of RT-PCR showed that the relative expressions of RUNX2, BMP-2 and ALP mRNA in BMSCs in exosome group were significantly higher than those in RUNX2 overexpression group and BMSCs group (P<0.05). The imaging results showed that the repair effect of skull defect in exosome group was better than that in RUNX2 overexpression group. HE staining and Masson staining showed that the repair effect of skull defect in exosome group was better than that in RUNX2 overexpression group (P<0.05). MSCs in exosome group was significantly higher than that in RUNX2 overexpression group and BMSCs group. The results of RT-PCR showed that the relative expressions of RUNX2, BMP-2 and ALP mRNA in BMSCs in exosome group were significantly higher than those in RUNX2 overexpression group and BMSCs group(P<0.05). The imaging results showed that the repair effect of skull defect in exosome group was better than that in RUNX2 overexpression group. HE staining and Masson staining showed that the repair effect of skull defect in exosome group was better than that in RUNX2 overexpression group(P<0.05).@*CONCLUSION@#Compared with RUNX2 gene overexpression vector transfection, extraction of exosomes directly can promote the differentiation of BMSCs into osteoblasts more efficiently, and the combination with calcium carbonate scaffold can better promote the healing of bone defects. So as to provide new ideas and methods for the clinical treatment of bone defects.
Subject(s)
Animals , Humans , Male , Rabbits , Calcium Carbonate/metabolism , Core Binding Factor Alpha 1 Subunit/metabolism , Exosomes/metabolism , Osteogenesis/genetics , RNA, Messenger/metabolismABSTRACT
Abstract This study evaluated the bone repair in surgical defects of rats treated with hyaluronic acid (HA) associated or not with Hevea brasiliensis fraction protein (F-1). Bone defect were created in 15 albino Wistar rats divided into 3 groups (n=5): Control group (1) - blood clot; HA group (2) - 0.5% hyaluronic acid; HAF1 group (3) - 0.1% F-1 protein fraction dissolved in 0.5% hyaluronic acid. After 4 weeks, the animals were euthanized and the bone repair was evaluated through histomorphometric analysis, zymography and immunohistochemistry. The neoformed bone area did not show a significant difference (p = 0.757), but there was a tendency for bone trabeculation to increase in the groups HA and HAF1. For immunohistochemically analysis, there was a difference in vascular endothelial growth factor (VEGF) labeling (p = 0.023), being higher in the groups HA and HAF1 than the control group. No significant difference in bone sialoprotein (BSP) (p = 0.681), osteocalcin (p = 0.954), however, significant difference in platelet endothelial cell adhesion molecule-1 (CD-31) (p = 0.040), with HAF1 group being significantly lower than the control. For zymographic analysis, there was no significant difference for metalloproteinase-2 (MMP-2) (p = 0.068), but there was a tendency to increase MMP-2 in the HA group. Despite the influence on angiogenic factors and the apparent tendency for greater trabeculation in the HA and HAF1 groups, there was no significant difference in the area of newly formed bone tissue in the analyzed period.
Resumo Este estudo avaliou o reparo ósseo em defeitos cirúrgicos de ratos tratados com ácido hialurônico (AH) associado ou não à fração proteica de Hevea brasiliensis (F-1). Foram criados defeitos ósseos em 15 ratos albinos Wistar divididos em 3 grupos (n = 5): Grupo controle (1) - coágulo sanguíneo; Grupo HA (2) - ácido hialurônico 0,5%; Grupo HAF1 (3) - fração proteica F-1 0,1% dissolvida em ácido hialurônico a 0,5%. Após 4 semanas, os animais foram submetidos à eutanásia e o reparo ósseo avaliado por meio de análise histomorfométrica, zimografia e imunohistoquímica. A área óssea neoformada não apresentou diferença significativa (p = 0,757), mas houve tendência de aumento da trabeculação óssea nos grupos HA e HAF1. Para a análise imunoistoquímica, houve diferença na marcação do fator de crescimento endotelial vascular (VEGF) (p = 0,023), sendo maior nos grupos HA e HAF1 do que no grupo controle. Nenhuma diferença significativa na sialoproteína óssea (BSP) (p = 0,681), osteocalcina (p = 0,954), no entanto, diferenças significativas foram encontradas para a molécula de adesão de células endoteliais plaquetárias-1 (CD-31) (p = 0,040), com o grupo HAF1 sendo significativamente inferior ao controle. Para a análise zimográfica, não houve diferença significativa para metaloproteinase-2 (MMP-2) (p = 0,068), mas houve tendência de aumento da MMP-2 no grupo HA. Apesar da influência sobre os fatores angiogênicos e da aparente tendência de maior trabeculação nos grupos HA e HAF1, não houve diferença significativa na área de tecido ósseo neoformado no período analisado.
Subject(s)
Animals , Rats , Hyaluronic Acid , Latex , Bone Regeneration , Matrix Metalloproteinase 2 , Vascular Endothelial Growth Factor AABSTRACT
Abstract The increase in the number of revision total knee arthroplasty surgeries has been observed in recent years, worldwide, for several causes. In the United States, a 601% increase in the number of total knee arthroplasties, between 2005 and 2030, is estimated. Among the enormous challenges of this complex surgery, the adequate treatment of bone defects is essential to obtain satisfactory and lasting results. The adequate treatment of bone defects aims to build a stable and lasting support platform for the implantation of the definitive prosthetic components and, if possible, with the reconstruction of bone stock. Concomitantly, it allows the correct alignment of the prosthetic and limb components, as well as restoring the height of the joint interline and, thus, restoring the tension of soft parts and load distribution to the host bone, generating a joint reconstruction with good function, stable, and painless. There are several options for the management of these bone defects, among them: bone cement with or without reinforcement with screws, modular metallic augmentations, impacted bone graft, structural homologous graft and, more recently, metal metaphyseal cones, and metaphyseal sleeves. The objective of the present article was to gather classic information and innovations about the main aspects related to the treatment of bone defects during revision surgeries for total knee arthroplasty.
Resumo O aumento do número de cirurgias de revisão de artroplastia total do joelho tem sido observado nos últimos anos, em todo o mundo, por diversas causas. Nos Estados Unidos, é estimado um aumento de 601% no número de artroplastias totais do joelho entre 2005 e 2030. Dentre os enormes desafios dessa cirurgia complexa, o adequado tratamento dos defeitos ósseos é essencial para a obtenção de resultados satisfatórios e duradouros. O adequado tratamento dos defeitos ósseos objetiva construir uma plataforma de suporte estável e duradoura para a implantação dos componentes protéticos definitivos e, se possível, com recomposição do estoque ósseo. Concomitantemente, possibilita o correto alinhamento dos componentes protéticos e do membro, assim como permite restabelecer a altura da interlinha articular e, dessa forma, restaurar a tensão de partes moles e distribuição de carga ao osso hospedeiro, gerando uma reconstrução articular com boa função, estável e indolor. Diversas são as opções para manejo dessas falhas ósseas, entre elas: cimento ósseo com ou sem reforço com parafusos, aumentos metálicos modulares, enxerto ósseo impactado, enxerto estrutural homólogo e, mais recentemente, cones metafisários de metal trabecular e sleeve metafisário. O objetivo do presente artigo foi reunir informações clássicas e inovações dos principais aspectos relativos ao tratamento das falhas ósseas durante as cirurgias de revisão de artroplastia total do joelho.
Subject(s)
Bone and Bones/abnormalities , Bone Transplantation , Arthroplasty, Replacement, KneeABSTRACT
OBJECTIVES@#To investigate the clinical effect of Er:YAG laser combined with ethylenediamine tetra acetic acid (EDTA) on three-walled periodontal intrabony defects adjacent to implant sites.@*METHODS@#A total of 30 patients with three-walled periodontal intrabony defects adjacent to implant sites were treated with the combination therapy. Patients with three-walled intrabony defects were divided into two groups according to the depth of the intrabony pocket between the implant and natural teeth. Evaluation of wound healing was performed 10 days after the operation, and bone augmentation was evaluated 6 months after the operation.@*RESULTS@#Primary healing in group 1 was 92.31%, primary healing in group 2 was 82.35%. No significant difference was observed between the two groups (@*CONCLUSIONS@#The effect of bone augmentation with combination therapy was more ideal in group 2 than in group 1. Implant placement with combination therapy may be a viable technique to reconstruct three-walled intrabony defects due to the space maintenance provided by implants and bone grafts and the good root surface biocompatibility provided by the Er:YAG laser and EDTA.
Subject(s)
Humans , Acetic Acid , Alveolar Bone Loss , Dental Implants , Ethylenediamines , Follow-Up Studies , Guided Tissue Regeneration, Periodontal , Lasers, Solid-State , Periodontal Attachment Loss , Treatment OutcomeABSTRACT
With the continuous progress of materials science and biology, the significance of biomaterials with dual characteristics of materials science and biology is keeping on increasing. Nowadays, more and more biomaterials are being used in tissue engineering, pharmaceutical engineering and regenerative medicine. In repairing bone defects caused by trauma, tumor invasion, congenital malformation and other factors, a variety of biomaterials have emerged with different characteristics, such as surface charge, surface wettability, surface composition, immune regulation and so on, leading to significant differences in repair effects. This paper mainly discusses the influence of surface charge of biomaterials on bone formation and the methods of introducing surface charge, aiming to promote bone formation by changing the charge distribution on the surface of the biomaterials to serve the clinical treatment better.
Subject(s)
Biocompatible Materials , Osteogenesis , Regenerative Medicine , Tissue EngineeringABSTRACT
BACKGROUND: Bone marrow mesenchymal stem cells have good potential for directional differentiation, but the effect and mechanism of enamel matrix derivatives on osteogenic differentiation are still unclear. OBJECTIVE: To summarize the latest research progress on osteogenic induction of bone marrow mesenchymal stem cells by enamel matrix derivatives. METHODS: Related literature from 2000 to 2020 was searched in CNKI, Wanfang Data, VIP Database, PubMed databases. The key words are “Emdogain® or enamel matrix derivatives, bone marrow mesenchymal stem cells”. The languages of the literature were set to Chinese and English. When retrieving some classic articles, the publication date could be extended appropriately. Finally, 62 English articles and 5 Chinese articles meeting the inclusion criteria were selected. RESULTS AND CONCLUSION: There are different reports on the osteogenic effect of enamel matrix derivatives on bone marrow mesenchymal stem cells. Enamel matrix derivatives may enhance the osteogenic induction ability of bone marrow mesenchymal stem cells, and may enhance the osteogenic effect by affecting cells or cell membranes, but the relevant mechanism is unclear.
ABSTRACT
In the process of repairing of bone defects, bone scaffold materials need to be implanted to restore the corresponding tissue structure at the injury. At present, the repair materials used for bone defects mainly include autogenous bone, allogeneic bone, metal materials, bioceramics, polymer materials and various composite materials. Different materials have demonstrated strong reconstruction ability in bone repair, but the ideal bone implants in the clinic are still yet to be established. Except for autogenous bone, other materials used in bone defect repair are unable to perfectly balance biocompatibility, bone formation, bone conduction and osteoinduction. Combining the latest advances in materials sciences and clinical application, we believe that composite materials supplementedwith Chinese medicine, tissue cells, cytokines, trace elements, etc. and manufactured using advanced technologies such as additive manufacturing technology may have ideal bone repair performance, and may have profound significance in clinical repair of bone defects of special type. This article reviewed to the domestic and foreign literature in recent years, and elaborates the current status of bone defect repair materials in clinical application and basic research in regard to the advantages, clinical options, shortcomings, and how to improve the autogenous bone, allogeneic bone and artificial bone materials, in order to provide a theoretical basis for clinical management of bone defects.