Restauração em resina composta semidireta em dente posterior: relato de caso / Semi-direct composite restoration in posterior toth: a case report

A escolha da técnica restauradora desempenha papel fundamental na eficácia e duração de um tratamento reabilitador. O objetivo deste relato de caso foi descrever a utilização da técnica semidireta para a confecção de uma restauração em resina composta em um primeiro molar inferior. A paciente apresentava uma restauração insatisfatória no dente 36, que necessitava ser substituída devido à infiltração por cárie. Optou-se pela técnica semidireta devido à amplitude da cavidade, que envolvia estruturas de suporte, e pela combinação das vantagens das abordagens direta e indireta. O procedimento envolveu a remoção de tecido cariado, a aplicação de hidróxido de cálcio pasta, seguida da aplicação de uma fina camada de ionômero de vidro e, posteriormente, resina fluída para realizar o selamento dentinário. O preparo foi realizado seguindo os princípios necessários. O elemento em questão foi moldado com silicone de adição e o arco antagonista, com alginato. Ambos modelos foram vertidos com silicone para modelos semirrígidos e montados em oclusor de peças de brinquedo. A restauração semidireta foi confeccionada em resina composta Filtek Z350 XT, respeitando a anatomia do dente 36. Pigmentos foram utilizados para aprimorar detalhes estéticos. Após acabamento e polimento, a peça foi condicionada e cimentada com cimento dual Relyx Ultimate. Pode-se concluir que a abordagem restauradora por meio da técnica semidireta construída em modelo semirrígido é uma opção terapêutica conservadora e vantajosa para dentes com extensa destruição coronária. Essa técnica possibilita a restauração de forma eficaz, garantindo tanto a estética quanto a função adequada do dente afetado(AU)

The choice of restorative technique plays a fundamental role in the effectiveness and duration of rehabilitation treatment. The objective of this case report was to describe the use of the semi-direct technique to create a composite resin restoration in a lower first molar. The patient had an unsatisfactory restoration on tooth 36, which needed to be replaced due to cavity infiltration. The semi-direct technique was chosen due to the amplitude of the cavity, which involved support structures, and the combination of advantages of the direct and indirect approaches. The procedure involved the removal of carious tissue, and the application of calcium hydroxide paste, followed by the application of a thin layer of glass ionomer and, subsequently, fluid resin to seal the dentin. The preparation was carried out following the necessary principles. The element in question was molded with addition silicone and the antagonist arch was molded with alginate. Both models were poured with silicone for semi-rigid models and mounted on toy parts occluders. The semi-direct restoration was made in Filtek Z350 XT composite resin, respecting the anatomy of tooth 36. Pigments were used to improve aesthetic details. After finishing and polishing, the piece was conditioned and cemented with Relyx Ultimate dual cement. It can be concluded that the restorative approach using the semi-direct technique built on a semi-rigid model is a conservative and advantageous therapeutic option for teeth with extensive coronal destruction. This technique allows for effective restoration, ensuring both the aesthetics and adequate function of the affected tooth(AU)

Effect of different design and surface treatment on the load-to-failure of ceramic repaired with composite / Efeito de diferentes tratamentos de superficie e formas do preparo de cerámicas na resistencia de uniao de reparos em resina composta

ABSTRACT Glass ceramics are widely used to manufacture esthetic veneers, inlays, onlays, and crowns. Although the clinical survival rates ofglass-ceramic restorations arefavorable,fractures or chips are common. Certain cases can be repaired with direct composite. Aim The aim of this study was to investigate the interaction effect of different designs and surface treatments on the load-to-failure of lithium disilicate glass-ceramic repaired with nanofilled composite. Materials and Method Lithium-disilicate glass-ceramic slabs (IPS e.max Press, Ivoclar Vivadent) with three different designs of the top surface (flat, single plateau, or doubleplateau) (n=U) received 'no treatment', '5% HF etching', or "AI2O3 sandblasting". HF-etched and sandblasted slabs also received silane and universal one-step adhesive application. All slabs were incrementally repaired with nanofilled composite (Filtek Z350, 3M ESPE) up to6 mm above the highest ceramic top plateau. Specimens were stored in artificial saliva at 37 °C for 21 days and then subjected to 1,000 thermocycles between 5 and 55 °C. The interface composite-ceramic of each specimen was tensile tested until failure in a universal testing machine and the mode of failure was determined under a stereomicroscope. The ceramic surface morphology of one representative tested specimen from each subgroup (design/surface treatment) was observed through scanning electron microscopy (SEM). Results Regardless of ceramic design, the absence of surface treatment resulted in significantly lower load-to-failure values. No significant differences in load-to-failure values were observed between HF-etched and sandblasted specimens for the flat design; however, HF etching resulted in significantly higher load-to-failure values than sandblasting for both single plateau and double plateau designs. The majority (60%) of HF-etched specimens with single plateau or double plateau presented mixed failures. SEM photomicrographs showed that HF-etched specimens had smoother surfaces than sandblasted specimens. Conclusion The surface treatment of a defective lithium disilicate glass-ceramic restoration has more influence than its macroscopic design on the retention of the composite repair. HF etching seems to provide higher bond strength to the composite repair.

RESUMO Embora fraturas e lascamento de restauragoes vitrocerámicas sejam comuns, alguns casos podem ser reparados com compósito direto. Objetivo investigar o efeito da interagao de diferentes formas e tratamentos de superficie na carga de ruptura de uma vitrocerámica reforgada com dissilicato de litio reparada com compósito nanoparticulado. Materials e Método A superficie superior de espécimes de vitroceramica (IPS e.max Press, Ivoclar Vivadent) foi preparada com tres formas (plana, plato único, ou duplo) e recebeu (n=11): 'nenhum tratamento', 'condicionamento com ácido hidrofluoridrico 5%', ou 'jateamento com AfOf. Ambos espécimes condicionados e jateados receberam silano e adesivo universal. Todos os espécimes foram reparados incrementalmente com compósito (Filtek Z350, 3M ESPE) até6 mm acima do plato cerámico mais alto, armazenados em saliva artificial á 37 °C por 21 dias, e submetidos á 1.000 termociclos (5 e 55 °C). A interface compósito-cerámica de cada amostra foi testada á tragao até sua falha em máquina universal e o modo de falha foi determinado com estereomicroscópio. A morfologia da superficie de uma amostra representativa de forma/tratamento de superficie foi observada através de microscopia eletronica de varredura (MEV). Resultados Independentemente da forma ceramica, a ausencia de tratamento superficial resultou em valores de carga de ruptura significativamente menores. Nao foi observada differenga significativa entre os espécimes planos condicionados ou jateados; no entanto, o condicionamento resultou em valores significativamente maiores que o jateamento para espécimes com plato único e duplo. A maioria (60%) dos espécimes condicionados e com plato único ou duplo apresentou falhas mistas. Imagens SEM demonstraram rugosidade superficial mais regular dos espécimes condicionados que os jateados. Conclusoes O tratamento superficial de uma restauragao defeituosa de vitrocerámica reforgada por dissilicato de litio tem maior influencia na retengao do reparo de compósito do que sua forma macroscópica; ainda, o condicionamento com ácido hidrofluoridrico parece proporcionar maior resistencia de uniao ao reparo com compósito.

The use of fiberglass posts in dentistry: a literature review / O uso de pinos de fibra de vidro na odontologia: uma revisão de literatura

The choice of retaining material that will replace the lost properties of the tooth, in which it is fragile and with loss of dentin structure, is important. The success of the treatment will depend on the qualities presented in it. Therefore, the objective of this work, through a literature review, is to present the advantages and disadvantages observed in the use of fiberglass post intraradicular retainer. This paper reviews the most relevant articles on the specificities presented in the fiberglass post retaining material, published in the period (2003 to 2020). The bibliographic search was performed in PubMed, Lilacs, Scielo, Google Scholar databases. In view of the selected articles on the subject, it is possible to observe the authors' acceptance of the application of the use of retainers, highlighting that in the treatment of cases with extensive coronary destruction, the aim is to have the functional and retentive capacity returned, in addition to the tension resistance. Therefore, theThe use of fiberglass posts in weakened teeth is effective as the material of choice. In cases that require reconstruction and return of tissue integrity, it has sufficient advantages for its selection. Despite the disadvantages it has, these do not outweigh the benefits to the point of making its use unfeasible. However, knowing when, where and how to treat is always important in any procedure for a satisfactory final outcome.

A escolha do material retentor que irá substituir as propriedades perdidas do dente, no qual este se apresenta de forma fragilizada e com perca de estrutura dentinária é importante. O sucesso do tratamento irá depender das qualidades apresentadas no mesmo. Sendo assim, o objetivo deste trabalho por meio de uma revisão de literatura é apresentar as vantagens e desvantagens observadas no uso do retentor intrarradicular de pino de fibra de vidro. Este trabalho revisa os artigos mais relevantes sobre as especificidades apresentadas no material retentor de pino de fibra de vidro, publicadas no período (2003 até 2020). A busca bibliográfica foi realizada nos bancos de dados PubMed, Lilacs, Scielo, Google Scholar. Diante dos artigos selecionados referentes ao tema, pode-se observar a aceitação dos autores sobre a aplicação do uso de retentores, destacando-se que no tratamento de casos com destruição coronária extensa o intuito é dispor da devolução da capacidade funcional, retentiva, além da resistência a tensão. Portanto, a utilização de pinos de fibra de vidro em dentes fragilizados apresenta efetividade como material de escolha. Em casos que necessitam de reconstrução e devolução de sua integridade tecidual, possui consigo vantagens suficientes para sua seleção. Apesar das desvantagens que possui, essas não se sobrepõem aos benefícios a ponto de tornarem inviáveis ao seu uso. Entretanto, saber quando, onde e como tratar é sempre importante em qualquer procedimento para um desfecho final satisfatório.

Bionic design,preparation and clinical translation of oral hard tissue restorative materials / 北京大学学报(医学版)

Oral diseases concern almost every individual and are a serious health risk to the popula-tion.The restorative treatment of tooth and jaw defects is an important means to achieve oral function and support the appearance of the contour.Based on the principle of"learning from the nature",Deng Xu-liang's group of Peking University School and Hospital of Stomatology has proposed a new concept of"microstructural biomimetic design and tissue adaptation of tooth/jaw materials"to address the worldwide problems of difficulty in treating dentine hypersensitivity,poor prognosis of restoration of tooth defects,and vertical bone augmentation of alveolar bone after tooth loss.The group has broken through the bottle-neck of multi-stage biomimetic technology from the design of microscopic features to the enhancement of macroscopic effects,and invented key technologies such as crystalline/amorphous multi-level assembly,ion-transportation blocking,and multi-physical properties of the micro-environment reconstruction,etc.The group also pioneered the cationic-hydrogel desensitizer,digital stump and core integrated restora-tions,and developed new crown and bridge restorative materials,gradient functionalisation guided tissue regeneration membrane,and electrically responsive alveolar bone augmentation restorative membranes,etc.These products have established new clinical strategies for tooth/jaw defect repair and achieved inno-vative results.In conclusion,the research results of our group have strongly supported the theoretical im-provement of stomatology,developed the technical system of oral hard tissue restoration,innovated the clinical treatment strategy,and led the progress of the stomatology industry.

Analysis of color stability and degree of conversion of different types of resin composites

Abstract Resin composites containing surface pre-reacted glass (S-PRG) have been introduced to reduce demineralization and improve remineralization of the tooth structure. However, water diffusion within the material is necessary for its action, which can impair its overall physicomechanical properties over time, including color stability. This study aimed to evaluate the color stability and related degree of conversion (DC) of four resin composites. Discs (6 x 4 mm, n = 5/group) of microhybrid (MH), nanofilled (NF), nanohybrid (NH), and S-PRG-based nanohybrid (S-PRG-NH) composites with two opacities (A2/A2E and A2O/A2D) were prepared. Color (CIELab and CIEDE2000) was evaluated with a spectrophotometer after aging in grape juice (2 x 10 min/10mL/7days). The DC was analyzed by using Fourier transform infrared spectroscopy before and after light-curing. Data were statistically analyzed by using two-way analysis of variance and post-hoc least significant difference tests (p<0.05). In the color stability analysis, the interaction between filler type and opacity was significant (CIELab, p = 0.0015; CIEDE2000, p = 0.0026). NH presented the highest color stability, which did not differ from that of MH. The greatest color alteration was observed for S-PRG-NH. S-PRG fillers also influenced DC (p < 0.05). The nanohybrid resin composite presented favorable overall performance, which is likely related to its more stable organic content. Notwithstanding the benefits of using S-PRG-based nanohybrid resins, mostly in aesthetic procedures, professionals should consider the susceptibility of such resins to color alteration, probably due to the water-based bioactive mechanism of action.

Resistencia a la fractura de premolares superiores con tratamientos de endodoncia por accesos conservador y tradicional / Resistance to Fracture of Upper Premolars with Endodontic Treatment by Conservative and Traditional Access

Introducción: Las piezas dentarias luego de tratamiento de endodoncia aumentan su susceptibilidad a la fractura, lo que está asociado, principalmente, con la pérdida de la estructura dental. Objetivo: Evaluar in vitro, la resistencia a la fractura de premolares superiores con tratamientos de endodoncia mediante acceso tradicional, conservador y conservador Ninja, con restauración provisoria y final. Métodos: Estudio prospectivo de diseño experimental longitudinal con 42 premolares superiores donados, separados en 3 grupos según el tipo de acceso de endodoncia a aplicarse y luego cada uno en dos subgrupos según el tipo de restauración, y un grupo control, al cual no se le realiza endodoncia. Luego de realizar el tratamiento y la restauración, se evaluó la resistencia a la fractura mediante carga compresiva oblicua (45°), en una máquina de carga universal. Las cargas requeridas para la fractura se registraron en newtons y fueron comparadas estadísticamente. Resultados: Las piezas tratadas mediante acceso conservador Ninja con restauración provisoria y final, requirieron una carga promedio para la fractura de 513,45 N y 638,13 N, respectivamente. Fuerzas significativamente mayores a las resistencias ofrecidas por los otros tratamientos con p 0,05. Conclusiones: En la endodoncia in vitro, el diseño del acceso a la cavidad, tipo conservador Ninja, afectó significativamente la resistencia a la fractura de los premolares superiores, adquiriendo un comportamiento biomecánico similar al de las piezas control(AU)

Introduction: Tooth pieces, after endodontic treatment, increase their susceptibility to fracture, a phenomenon mainly associated with loss of tooth structure. Objective: To evaluate, in vitro, the resistance to fracture of upper premolars with endodontic treatment by traditional, conservative and conservative ninja access, with temporary and final restoration. Methods: A prospective study of longitudinal experimental design was carried out with 42 donated upper premolars, separated into three groups, according to the type of endodontic access to be applied; in turn, each was then divided into two subgroups, according to the type of restoration, and a control group, not performed endodontic treatment. After treatment and restoration, fracture resistance was evaluated using oblique compressive loading (45°) in a universal loading machine. The loads required for fracture were recorded in newtons and statistically compared. Results: The parts treated by conservative ninja access with provisional and final restoration required an average fracture load of 513.45 N and 638.13 N, respectively; this forces were significantly higher than the resistance values offered by the other treatments, with p < 0.05. Likewise, there were no significant differences in the resistance values obtained between the cases of conservative access and traditional access, nor when comparing the types of applied restoration, with P<0.05. Conclusions: In in vitro endodontics, the design of the access to the cavity of conservative ninja type significantly affected the resistance to fracture of the upper premolars, acquiring a biomechanical behavior similar to that of the control pieces(AU)

Reabilitação estética e funcional com resina composta após trauma dentário: relato de caso / Aesthetic and functional rehabilitation with composite resin after dental trauma: case report

As lesões dentárias traumáticas são um problema de saúde pública mundial, dentre as quais a fratura dentária é a de maior ocorrência, envolvendo principalmente os dentes anteriores. A abordagem de grandes fraturas anteriores é um desafio para cirurgiões dentistas de qualquer nível pois, além da função, afetam diretamente a estética do paciente, fazendo-se necessário um planejamento que envolva diferentes especialidades na odontologia. Objetivo: Relatar um caso clínico de reabilitação funcional e estética de fratura dentária nos incisivos centrais superiores envolvendo tratamento endodôntico, instalação de pino de fibra de vidro e restauração direta em resina composta. Relato de Caso: O paciente de 17 anos sofreu fratura nos incisivos centrais superiores causada por uma queda de bicicleta. Devido à busca tardia por tratamento o elemento 21 foi diagnosticado com necrose pulpar e, portanto, foi submetido à tratamento endodôntico pela Técnica Crown Down e reabilitação com pino de fibra de vidro Splendor-SAP. Posteriormente, os elementos 11 e 21 foram restaurados com facetas diretas em resina composta pela técnica incremental. Conclusão: A reabilitação com instalação de pino de fibra de vidro associada à técnica de estratificação incremental em resina composta se mostra como uma boa opção para reabilitação estética pois permite dar forma anatômica ao dente com riqueza de detalhes na estratificação da dentina e esmalte, além de máxima preservação da estrutura dental. Os resultados obtidos reforçam o sucesso estético e funcional com significativo impacto na qualidade de vida do paciente(AU)

Traumatic dental injuries are a worldwide public health problem, among which dental fractures are the most frequent, mainly involving the anterior teeth. The approach of large anterior fractures is a challenge for dental surgeons of any level because, in addition to function, they directly affect the patient's esthetics, requiring a plan that involves different specialties in dentistry. Objective: Report a clinical case of functional and aesthetic rehabilitation of dental fractures in maxillary central incisors involving endodontic treatment, installation of a fiberglass post and direct restoration in composite resin. Case Report: The 17-year-old patient suffered a fracture in the upper central incisors caused by a fall from a bicycle. Due to the late search for treatment, element 21 was diagnosed with pulp necrosis and, therefore, underwent endodontic treatment using the Crown Down Technique and rehabilitation with a Splendor-SAP fiberglass pin. Later, elements 11 and 21 were restored with direct veneers in composite resin using the incremental technique. Conclusion: Rehabilitation with the installation of a fiberglass post associated with the incremental layering technique in composite resin is a good option for aesthetic rehabilitation as it allows the anatomical shape of the tooth with rich details in the layering of dentin and enamel, in addition to maximum preservation of the tooth structure. The results obtained reinforce the aesthetic and functional success with a significant impact on the patient's quality of life(AU)

Composite resin reinforced with silk nanoparticles from Bombyx mori cocoon for dental applications

Abstract The objective of this work was to evaluate the mechanical performance of Z350 resin composite modified with Bombyx mori cocoons silk nanoparticles for dental applications. Four experimental groups were analyzed G0% = Filtek Z350 resin composite (control); G1% = Filtek Z350 with 1% of silk nanoparticles; G3% = Filtek Z350 with 3% of silk nanoparticles; G5% = Filtek Z350 with 5% of silk nanoparticles. It was employed scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, 3-point flexural strength test, Knoop hardness test, and surface roughness. From 3-point flexural strength tests the control group presented the best results G0% = 113.33 MPa (±23.73). The higher flexural modulus was shown by groups G3% = 29.150 GPa (±5.191) and G5% = 34.101 GPa (±7.940), which are statistically similar. The Knoop microhardness test has shown statistical difference only among the G3% group between the top 80.78 (± 3.00) and bottom 68.80 (±3.62) and no difference between the groups. The roughness test presented no statistical difference between the groups. The incorporation of silk nanoparticles reduced the flexural strength of Z350 resin composite. The surface roughness and microhardness tests showed no changes in any of the groups studied.

Resumo O objetivo deste trabalho foi avaliar o desempenho mecânico da resina composta Z350 modificada com nanopartículas de seda Bombyx mori cocoons para aplicações odontológicas. Quatro grupos experimentais foram analisados: G0%) Resina Z350 apenas (grupo controle); G1%) Reforço com 1% de nanopartículas de seda; G3%) Reforço com 3% de nanopartículas de seda; e G5%) Reforço com 5% de nanopartículas de seda. Foi empregado microscopia eletrônica de varredura, espectroscopia de energia dispersiva de raios X, difração de raios X, teste de resistência à flexão de 3 pontos, teste de dureza Knoop e rugosidade superficial. Nos testes de resistência à flexão de 3 pontos o grupo controle apresentou melhores resultados G0% = 0.113 GPa (±0.024). O maior módulo de flexão foi demonstrado pelos grupos G3% = 29.151GPa (±5.191) e G5% = 34.102 GPa (±7.94), que são estatisticamente semelhantes. O teste de microdureza Knoop mostrou diferença estatística apenas entre o grupo G3% entre os 80.78 superiores (± 3.00) e os 68.80 inferiores (±3.62). Não há diferença entre os grupos. O teste de rugosidade não apresentou diferença estatística entre os grupos. A incorporação de nanopartículas de seda reduziu a resistência à flexão da resina composta Z350. Os testes de rugosidade superficial e microdureza não apresentaram alterações em nenhum dos grupos estudados.

Sistemas de pulido para restauraciones cerámicas. Revisión de la literatura / Polishing systems for ceramic restorations. Literature review

El pulido es un paso de suma importancia en el flujo de trabajo de las restauraciones cerámicas, después de realizado un ajuste con puntas o piedras diamantadas, ya que disminuye la rugosidad de las superficies tratadas. Esto repercute positivamente en las propiedades mecánicas y ópticas del material. Sin embargo, la poca literatura disponible acerca de este procedimiento hace que sea pasado por alto. Debido a esto, el presente articulo tuvo como objetivo realizar una revisión bibliográfica sobre los diferentes protocolos de pulido para las diversas restauraciones cerámicas de mayor uso: Feldespática, disilicato de litio y zirconia en sus diferentes presentaciones. Se describen aspectos relevantes sobre el pulido mecánico, la rugosidad superficial y los sistemas de pulido actuales para cerámicas.

Polishing is an extremely important step in the workflow of ceramic restorations, after adjustment with diamond burs or stones, as it reduces the roughness of the treated surfaces. This has a positive impact on the mechanical and optical properties of the material; however, the limited literature available about this procedure makes it to be overlooked. Therefore, the aim of this article was to review the literature on the different polishing protocols for the most used ceramic restorations: Feldspathic, lithium disilicate and zirconia ceramics. Relevant aspects on mechanical polishing, surface roughness and current polishing systems for ceramics are described.

Key points and clinical observation of immediate implant restoration in the aesthetic area of anterior teeth / 中国医师杂志

Objective:To explore the treatment methods and effects of immediate implant restoration in the aesthetic area of anterior teeth, and explain the advantages of its technology.Methods:A prospective selection was conducted on 100 patients admitted to the Department of Stomatology at the Hunan Second People′s Hospital from June 2019 to June 2022 who underwent implant surgery due to missing teeth in the aesthetic area of the anterior teeth. The patients were randomly divided into an immediate group and a conventional group, with 50 patients in each group. The immediate group received immediate implant restoration after tooth extraction, while the conventional group received delayed implant restoration after tooth extraction. We compared the aesthetic effects, implant success rate, and patient satisfaction at different times after surgery.Results:After 12 months of postoperative evaluation, both groups of patients achieved successful implant repair. The gingival red aesthetic index score on the day after immediate implantation surgery in the immediate group was higher than that in the conventional group, and the difference was statistically significant ( P<0.05); At 6 and 12 months after surgery, there was no statistically significant difference in scores between the two groups (all P>0.05). After completing permanent repair, the satisfaction of patients in the immediate group was significantly higher than that in the conventional group, and the difference was statistically significant ( P<0.05). Conclusions:Adopting immediate implant restoration technology in the aesthetic area of anterior teeth can reduce the number of surgeries and treatment time, achieve better aesthetic results in the early stage, and improve patient satisfaction.

Clinical performance of an alkasite-based bioactive restorative in class II cavities: a randomized clinical trial

Abstract Objective This clinical study aimed to evaluate the clinical performance of an alkasite-based bioactive material by comparing it with a resin composite (RC) in the restoration of Class II cavities over a year. Methodology A hundred Class II cavities were restored at 31 participants. Groups were as follows: Cention N (CN) (Ivoclar Vivadent, Schaan, Liechtenstein) and G-ænial Posterior (GP) (GC, Tokyo, Japan) in combination with G-Premio Bond (etch&rinse). Restorative systems were applied following manufacturers' instructions. They were finished and polished immediately after placement and scored based on retention, marginal discoloration, marginal adaptation, sensitivity, surface texture, and color match using modified USPHS criteria after 1 week (baseline), 6 months, and 12 months. Statistical analyses were performed using chi-square, McNemar's, and Kaplan Meier tests. Results After 12 months, the recall rate was 87%. Survival rates of CN and GP restorations were 92.5% and 97.7%, respectively. Three CN and one GP restorations lost retention. Seven CN (17.9%) and five (11.6%) GP restorations were scored as bravo for marginal adaptation and no significant difference was seen between groups (p=0.363). One (2.7%) CN and two GP (4.7%) restorations were scored as bravo for marginal discoloration, but no significant difference was observed between groups(p=1.00). For surface texture, three (8.1%) CN and three (7%) GP restorations were scored as bravo (p=1.00). None of the restorations demonstrated post-operative sensitivity or secondary caries at any examinations. Conclusion The tested restorative materials performed similar successful clinical performances after 12 months. ClinicalTrials.gov (NTC04825379).

An engineering perspective of ceramics applied in dental reconstructions

Abstract The demands for dental materials continue to grow, driven by the desire to reach a better performance than currently achieved by the available materials. In the dental restorative ceramic field, the structures evolved from the metal-ceramic systems to highly translucent multilayered zirconia, aiming not only for tailored mechanical properties but also for the aesthetics to mimic natural teeth. Ceramics are widely used in prosthetic dentistry due to their attractive clinical properties, including high strength, biocompatibility, chemical stability, and a good combination of optical properties. Metal-ceramics type has always been the golden standard of dental reconstruction. However, this system lacks aesthetic aspects. For this reason, efforts are made to develop materials that met both the mechanical features necessary for the safe performance of the restoration as well as the aesthetic aspects, aiming for a beautiful smile. In this field, glass and high-strength core ceramics have been highly investigated for applications in dental restoration due to their excellent combination of mechanical properties and translucency. However, since these are recent materials when compared with the metal-ceramic system, many studies are still required to guarantee the quality and longevity of these systems. Therefore, a background on available dental materials properties is a starting point to provoke a discussion on the development of potential alternatives to rehabilitate lost hard and soft tissue structures with ceramic-based tooth and implant-supported reconstructions. This review aims to bring the most recent materials research of the two major categories of ceramic restorations: ceramic-metal system and all-ceramic restorations. The practical aspects are herein presented regarding the evolution and development of materials, technologies applications, strength, color, and aesthetics. A trend was observed to use high-strength core ceramics type due to their ability to be manufactured by CAD/CAM technology. In addition, the impacts of COVID-19 on the market of dental restorative ceramics are presented.

Can composite packaging and selective enamel etching affect the clinical behavior of bulk-fill composite resin in posterior restorations? 24-month results of a randomized clinical trial

Abstract Objectives This is a double-blind, split-mouth, randomized clinical study that aims to evaluate the influence of bulk-fill composite packaging presented in syringes (BSy) and capsules (BCa), and the effect of selective enamel etching (SEE) on the clinical performance of class I and II bulk-fill resin composite restorations after 24 months. Methodology A total of 295 class I or class II restorations were performed on 70 patients. One universal adhesive was applied in all restorations. SEE was used in 148 restorations and self-etching mode (SET) in 147 restorations. After the adhesive application, cavities were restored with Filtek Bulk-fill Posterior Restorative in syringes (BSy), Filtek One Bulk-fill in capsules (BCa), or Filtek Supreme Ultra in syringes with the incremental technique (In). All restorations were evaluated using the FDI criteria after one week and after six, 12, and 24 months. Kaplan-Meier survival analysis and Pearson's Chi-square test were used (α=0.05) for statistical analysis. Results After 24 months, 62 patients were evaluated and four restorations were lost due to fracture (one for SEEBSy, two for SEEIn, and one for SETIn). No significant differences in the fracture and retention rate were found between groups (p>0.05). SEE showed significantly fewer marginal adaptation defects than SET (p<0.05). BCa and BSy groups showed fewer marginal discrepancies compared to In (p<0.05). Restorations performed with BCa showed less color mismatch than BSy or In (p<0.05). Conclusion Although all restorations exhibited satisfactory clinical performance after 24 months of clinical service, the clinical behavior of class I and II restorations' improved when performed with a bulk-fill composite in capsules, mainly when associated with a universal adhesive applied with SEE.

Immediate prosthetic rehabilitation of lower molars with hybrid internal tapered implants: report of two cases / Reabilitação protética imediata de molares inferiores com implantes cônicos internos híbridos: relato de dois casos

ABSTRACT The immediate rehabilitation of the posterior region of the mandible with dental implants, expands the set of possible actions for the dental surgeon, in the face of tooth loss. The purpose of this study is to describe two cases of single rehabilitation of mandibular molars with hybrid internal tapered implants indicated for immediate loading in post-extraction socket, associated with the maintenance of the prosthetic and peri-implant space. Implants with macrogeometry and surface treatment (Hydrophilic) were used to optimize primary stability, as well as the type of internal connection and prosthetic abutments that allows better accommodation and healing of adjacent tissues, and protection of the bone graft. Different methodologies of surgical guides did not influence the final result. The predictability of associating techniques and components can be observed in the 2-year follow-up. The initial planning combined with the new technologies enable to achieve stable and functional final restorations.

RESUMO A reabilitação imediata da região posterior da mandíbula com implantes dentários, amplia o conjunto de ações possíveis ao cirurgião dentista, frente as perdas dentárias. O intuito desse estudo é descrever dois casos de reabilitação unitária de molares inferiores com implantes cônicos internos híbridos indicados para carregamento imediato em alvéolos pós-extração, associado a manutenção do espaço protético e peri-implantar. Foram utilizados implantes com macrogeometria e tratamento de superfície que otimizassem a estabilidade primária (Hidrofílicos), bem como o tipo de conexão interna e abutments protéticos que permitisse melhor acomodação e cicatrização dos tecidos adjacentes, e proteção do enxerto ósseo. Diferentes metodologias de guias cirúrgicos não influenciaram o resultado final. A previsibilidade da associação de técnicas e componentes pode ser observada no follow-up de 2 anos. O planejamento inicial aliado às novas tecnologias permite restaurações finais estáveis e funcionais.

Background and surrounding colors affect the color blending of a single-shade composite

Abstract This study evaluated the background and effect of surrounding colors on the color blending of a single-shade composite used in a thin layer. Disc-shaped specimens (1.0 mm thickness) were built with the Vittra APS Unique composite surrounded (dual specimens) or not surrounded (simple specimens) by a control composite (shade A1, A2, or A3). Simple specimens were also built with only control composites. The specimen color was measured against white and black backgrounds with a spectrophotometer (CIELAB system). The whiteness index for dentistry (WID) was calculated for simple specimens. Differences (ΔE00) in color and translucency parameters (ΔTP00) between the simple/dual specimens and the controls were calculated. The translucency adjustment potential (TAP) and color adjustment potential (CAP) were estimated based on the ratios between data from simple and dual specimens. The Vittra APS Unique composite showed higher WID values than the controls. No differences between ΔTP00_SIMPLE and ΔTP00_DUAL were observed for any of the shades. The composite shade did not affect TAP values. The lowest values of ΔE00_SIMPLE and ΔE00_DUAL were observed for shade A1 regardless of the background color. For the white background, ΔE00_SIMPLE values did not differ from those of ΔE00_DUAL for all shades. Only A1 showed ΔE00_DUAL values lower than ΔE00_SIMPLE when the black background was used. The highest modulus of CAP (negative values for the white background) was observed when shade A1 surrounded the Vittra APS Unique composite. The color blending ability of the single-shade resin composite used in a thin layer was affected by both the surrounding shade and background color.

Wear of dental ceramics / Desgaste das cerâmicas odontológicas

Com base no desenvolvimento da odontologia adesiva, restaurações minimamente invasivas em cerâmica são utilizadas como alternativas para restaurar um dente. As cerâmicas odontológicas são amplamente aplicadas na área odontológica principalmente devido à sua estética e resistência mecânica. Uma das propriedades da cerâmica a ser bem conhecida antes de seu uso, é a resistência ao desgaste que deve ser compatível com o comportamento de desgaste do antagonista para evitar desempenhos indesejados. Portanto, vários métodos têm sido realizados para avaliar o comportamento do desgaste dos materiais cerâmicos considerando diferentes condições presentes no complexo meio oral. Este estudo teve como objetivo compilar os métodos utilizados para investigar o desgaste das cerâmicas odontológicas e descrever os mecanismos de desgaste envolvidos nos mesmos. A obtenção e análise de dados também é abordada para discutir os resultados obtidos a partir de diferentes métodos, bem como a análise clínica do desgaste e perspectivas futuras sobre esse tema. Em conclusão, muitas metodologias estão disponíveis para medir o desgaste cerâmico. Portanto, os métodos devem ser selecionados com base na relevência clínica de cada estudo e devem seguir parâmetros previamente relatados para padronização, permitindo a comparação da literatura (AU)

Based on the development of adhesive dentistry, minimally invasive restorations in ceramics are used as alternatives to restore a tooth. Dental ceramics are largely applied in the dentistry field mainly due to their esthetic and mechanical strength. One of the ceramic properties to be well known before its use is the wear resistance that should be compatible with the antagonist wear behavior to avoid unwanted performance. Therefore, several methods have been performed to assess the ceramic materials wear behavior considering different conditions present in the complex oral medium. This study aimed to compile the methods used to investigate dental ceramics wear and to describe the wear mechanisms involved on them. Obtaining and analyzing data is also addressed to discuss the results obtained from different methods, as well as the clinical analysis of wear and future perspectives on this topic. In conclusion, many methodologies are available to measure the ceramic wear. Therefore, the methods must be selected based on the clinical significance of each study and should follow previously reported parameters for standardization, allowing literature comparison. (AU)

Biomimetics and the restoration of the endodontically treated tooth / Biomimética e a restauração do dente tratado endodonticamente

Although much progress has been obtained in terms of the Endodontic treatment, the literature shows that true success can be only achieved with adequate coronal seal to avoid bacterial contamination, and protect the tooth structure from fracture. There are many options available to the clinician to restore the endodontically treated tooth; however, there is not much evidence available on what alternative is better than another. This review will critically present the current knowledge on restorative choices, including posts and endocrowns, showing advantages and disadvantages of different treatment forms. With this knowledge, we will also introduce the concept of biomimetics to endodontically treated teeth, and how the nature of their remaining tooth structure can benefit from this approach. This concept entails the use of mechanisms and biologically produced materials to restore a tooth in a way that would mimic its natural structure, with the purpose of achieving better long-term prognosis (AU)

Embora tenha se obtido progresso em relação ao tratamento endodôntico, a literatura mostra que o sucesso real só pode ser atingido com o selamento coronal adequado, para evitar-se a contaminação bacteriana e proteger-se a estrutura dental de fraturas. Há muitas opções disponíveis para o clínico para a restauração do dente tratado endodonticamente; entretanto, não há muita evidência disponível sobre qual alternativa é melhor que a outra. Esta revisão apresentará criticamente o conhecimento atual sobre opções restauradoras, incluindo retentores intraradiculares e endocrowns, mostrando vantagens e desvantagens das diferentes formas de tratamento. Com esse conhecimento, também introduziremos o conceito de biomimética, uma vez que dentes tratados endodonticamente, devido a natureza de sua estrutura dental remanescente, podem se beneficiar desta abordagem. Esse conceito envolve o uso de mecanismos e materiais produzidos biologicamente para restaurar um dente de forma a imitar a estrutura natural, com o objetivo de alcançar melhor prognóstico de longo-prazo.(AU)

Impact of access cavities on root canal preparation, restorative protocol quality, and fracture resistance of teeth

Abstract The survival of endodontically treated teeth depends on the remaining tooth structure. The aim of this study was to evaluate the impact of different access cavities on root canal preparation, restorative protocol, and fracture resistance of endodontically treated teeth. Fifty-six mandibular molars were divided into control (n=8) and experimental (n=16) groups according to access cavity: Traditional, Conservative, and Truss; and redistributed (n=8) according to instrumentation protocols: Reciproc Blue and R-motion. After, teeth were scanned in micro-CT and then filled and redistributed according to composite resin restoration (n=8): Filtek One BulkFill and Filtek Z350. A new micro-CT scan was performed to analyze the restorative material. Then, samples were submitted to fracture resistance testing and the failure pattern was determined. Data were analyzed using paired T-test, ANOVA, Tukey, and chi-square tests (α=0.05). In Truss, R-Motion promoted less transportation in different thirds of root canals. Higher percentages of voids (5.05%) and filling material (11.7%) were observed in Truss. Fracture resistance values were higher for the control group, followed by Truss, Conservative, and Traditional. The predominant failure pattern was type-II. In Truss, reciprocating instruments with smaller taper showed less canal transportation. Also, Truss provided higher values of fracture resistance, although it presented a higher percentage of voids and remaining filling material. Thus, in Truss, reciprocating files with smaller taper showed less canal transportation, and these cavities provided higher values of fracture resistance, although it presented a higher percentage of voids and remaining filling material.

Cost-effectiveness of selective caries removal versus stepwise excavation for deep caries lesions

Abstract A multicenter, randomized controlled clinical trial evaluated the effectiveness of two treatments for deep caries lesions in permanent molars - selective caries removal (SCR) to soft dentin with restoration in a single visit, and stepwise excavation (SW) - regarding pulp vitality for a 5-year follow-up period. The present study aimed to determine the cost-effectiveness of these treatments. Treatments were conducted in two Brazilian cities (Brasília and Porto Alegre). At baseline, 299 permanent molars (233 patients) were treated and 229 teeth (174 patients) were evaluated after 5 years. The discounted cash flow method was adopted. The total cost of each treatment was calculated, and the failure cost (endodontic treatment + restoration) was added to the final cost, according to the 5-year failure rates of each therapy (20% for SCR and 44% for SW). A public health service unit composed of three dentists in 4-hour work shifts was used to calculate the monetary value of the treatments, assuming a total of 528 treatments/month. Considering the 229 teeth evaluated after 5 years (115 SCR and 114 SW), SCR provided savings of 43% (amalgam) and 41% (resin composite) per treatment, compared to SW. The SCR technique provides benefits for public finances (direct economy) and for public health services (increase in the number of treatments performed). Considering that maximizing profit and reducing costs are powerful motivating factors for adopting a certain treatment, this study provides data to better support the decision-making process, regarding the management of deep caries lesions in permanent molars.

A clinical evaluation of zirconia reinforced lithium silicate glass-ceramic CAD/CAM onlay: a two-year case report / Avaliação clínica de onlay cerâmica do tipo CAD / CAM de silicato de lítio reforçado com zircônia: um relato de caso de dois anos

ABSTRACT The CAD/CAM technology arose from the need to develop materials with better mechanical and optical properties that could be used for making monolithic restorations. Several materials have been used for milling indirect restorations in prefabricated blocks. Among them, lithium silicate reinforced with zirconia. Due to its recent introduction in the market, this case report aimed to present a detailed clinical protocol for the execution of a ceramic onlay of this material using CAD/CAM technology. A 57-year-old female patient sought care with extensive restoration in composite resin (BOMD) of tooth 15 maintained for almost two years. However, due to bruxism, constant dental tightening, the extension of the direct restoration and the need for improved esthetics, it was proposed to replace it with an indirect ceramic onlay restoration. Prophylaxis and choice of the color of the patient's dental substrate were performed. Afterwards, the dental preparation was made and polished. Subsequently, the molding was made with addition silicone and the provisional restoration confectioned. Once the stone model was obtained, it was scanned and the ceramic onlay restoration was milled using CAD/CAM technology. Finally, the restoration was stained and cemented over the preparation. After 2 years, the restoration remained stable, with no evidence of color mismatch, marginal discoloration, marginal cleft, caries or fracture, proving the effectiveness of the treatment in this time interval. The correct indication of the ceramic material combined with the use of CAD/CAM technology facilitated the restorative process, restoring function and the esthetics desired by the patient.

RESUMO A tecnologia CAD/CAM surgiu da necessidade de desenvolvimento de materiais com melhores propriedades mecânicas e ópticas que pudessem ser utilizados para confecção de restaurações monolíticas. Diversos materiais têm sido utilizados para fresagem de restaurações indiretas em blocos pré-fabricados. Dentre eles, o silicato de lítio reforçado com zircônia. Devido a sua recente introdução no mercado, este relato de caso objetivou apresentar um protocolo clínico detalhado para a execução de uma onlay cerâmica desse material utilizando a tecnologia CAD/CAM. Paciente, 57 anos, sexo feminino, procurou atendimento com extensa restauração em resina composta envolvendo as faces (MODV) do dente 15 mantida por quase dois anos. Contudo, em virtude do bruxismo, do apertamento dental constante, da extensão da restauração direta e da necessidade de melhora na estética, foi proposto a substituição por uma restauração indireta em cerâmica do tipo onlay. Foi realizada a profilaxia e escolha da cor do substrato dental da paciente. Em seguida o preparo dental foi confeccionado e polido. Posteriormente foi feita a moldagem com silicone de adição e a confecção do provisório. Com a obtenção do modelo, este foi escaneado e fresada a onlay cerâmica pela tecnologia CAD/CAM, que posteriormente foi maquiada e cimentada sobre o preparo. Após 2 anos, a restauração permaneceu estável, sem evidência de incompatibilidade de cor, descoloração marginal, fenda marginal, cárie ou fratura, comprovando a eficácia do tratamento neste intervalo de tempo. A correta indicação do material cerâmico aliada ao uso da tecnologia CAD-CAM facilitou o processo restaurador devolvendo função e a estética desejada pela paciente.