Quality analysis of four filling techniques in ovoid root canals prepared with M® instruments

Aims: This study aimed to assess the quality of various filling techniques in ovoid root canals prepared using M® instruments. Materials and Methods: Sixty ovoid root canals underwent endodontic treatment with M® instruments and were subsequently divided randomly into four experimental groups, each employing a different obturation technique: TU - single cone; TL - active lateral condensation; TH - Tagger hybrid; TS - Schilder technique. Digital radiographs were taken in both mesiodistal and buccolingual directions to examine the filled teeth. The percentage of filling material and empty spaces was quantified using Photoshop® software. Data were subjected to statistical analysis using the one-way ANOVA test and T test (? = 0.05). Results: In the TL and TS groups, there was a significantly lower average percentage of unfilled spaces compared to the TU and TH groups (P<0.0001). When analyzing the radiographic directions, the mesiodistal view exhibited the highest mean percentage of unfilled spaces, with differences in filling quality observed only in the TU and TL groups. Conclusions: Active lateral condensation and Schilder techniques demonstrated superior performance in achieving effective filling of ovoid root canals.

Características clínicas y radiográficas de reabsorciones radiculares externas / Clinical and radiographic characterization of external root resorption

Introducción La siguiente revisión bibliográfica se realizó con el propósito de reconocer las características clínicas y radiográficas que deben ser evaluadas para el diagnóstico de las reabsorciones radiculares externas incluyendo también sus tratamientos. Metodología Se llevó a cabo una búsqueda en las bases de datos MEDLINE/PubMed, Cochrane Library y Google Scholar bajo el término , incluyendo estudios experimentales y revisiones bibliográficas desde 2010 a 2022 en español e inglés, incluyendo finalmente 17 artículos. Resultados Los resultados obtenidos señalaron que cada tipo de reabsorción radicular externa presenta características clínicas específicas que las diferencian. Estas diferencias son: para la reabsorción externa inflamatoria la vitalidad pulpar negativa; para la reabsorción externa de reemplazo la ausencia de movilidad y percusión metálica; para la reabsorción externa cervical una coloración rosada de la corona; la reabsorción externa superficial no presenta ningún tipo de sintomatología clínica y la reabsorción de colapso apical transitorio presenta un cambio de coloración transitorio. Conclusión Las reabsorciones radiculares externas requieren un diagnóstico preciso y temprano. Se debe realizar un examen clínico con énfasis en sondaje, coloración, movilidad y pruebas de vitalidad.

Introduction The following bibliographic review was carried out with the purpose of recognizing the clinical and radiographic characteristics that must be considered in the diagnosis of external root resorption, including treatments. Methods A bibliographic search was carried out in PubMed/Medline, Cochrane Library and Google Scholar databases under the term "external root resorption", from 2010 to 2022 in Spanish and English. Experimental studies and bibliographic reviews were selected, and finally 17 articles were included. Results The results obtained indicated that each type of resorption presents specific clinical characteristics that differentiate them, these are: for external inflammatory resorption a negative pulp vitality; for replacement external resorption the absence of mobility and metallic percussion; for cervical external resorption a pink coloration of the crown; superficial external resorption does not present any type of clinical symptoms and transient apical collapse presents a transient change in color. Conclusion External root resorptions require accurate and early diagnosis. A clinical examination should be performed with emphasis on the following: probing, coloration, mobility, and vitality tests.

Comparación de la actividad antimicrobiana de cementos selladores en endodoncia / Comparison of the antimicrobial activity of sealing cements in endodontics

Introducción: la persistencia de microorganismos en los conductos radiculares es uno de los principales factores del fracaso endodóncico. Por ello la importancia de conocer las propiedades antimicrobianas de los distintos tipos de selladores. Objetivo: realizar una comparación con base en la evidencia disponible sobre la actividad antimicrobiana de los diferentes cementos selladores en endodoncia. Material y métodos: la información fue recopilada de las bases de datos PubMed y Google Académico en el idioma inglés y español, publicados en el periodo 2014-2023. Resultados: un gran número de microorganismos se encuentran presentes en los diferentes tipos de infecciones de origen endodóncico, se han identificado más de 500 especies microbianas, entre ellas bacterias, hongos, arqueas y virus. Los cementos selladores se pueden clasificar según su composición química, en cementos a base de óxido de zinc-eugenol, hidróxido de calcio, a base de ionómero de vidrio, silicona, resina y biocerámicos. Conclusión: los cementos selladores que mostraron mayor actividad antimicrobiana contra los microorganismos persistentes fueron los cementos a base de óxido de zinc-eugenol, resina y biocerámicos. Sin embargo, se identificó que cada autor utilizó diferentes métodos y tiempos, por lo tanto, no es posible lograr definir con exactitud qué cemento sellador posee la mejor capacidad antimicrobiana (AU)

Introduction: the persistence of microorganisms in root canals is one of the main factors of endodontic failure. Therefore, the importance of knowing the antimicrobial properties of the different types of sealants. Objective: to make a comparison based on the available evidence on the antimicrobial activity of the different endodontics sealers. Material and methods: the information was collected from PubMed and Google Academic databases in English and Spanish, published in the period 2014-2023. Results: a large number of microorganisms are present in the different types of infections of endodontic origin, more than 500 microbiological species have been identified, including bacteria, fungi, archaea and viruses. Sealer cements can be classified according to their chemical composition, into cements based on zinc oxide-eugenol, calcium hydroxide, based on glass ionomer, silicone, resin and bioceramics. Conclusion: sealer cements that showed the highest antimicrobial activity against persistent microorganisms were zinc oxide-eugenol, resin, and bioceramic-based cements. However, it was identified that each author used different methods and times, therefore, it is not possible to accurately define which sealer cement has the best antimicrobial capacity (AU)

Antibacterial ability of different activated irrigation after root canal preparation: intratubular analyses

Abstract This study assessed the intratubular antibacterial ability of different activated irrigations after chemical mechanical preparation. Seventy-two palatal root canals of upper molars were infected with Enterococcus faecalis for 4 weeks, and then initial bacterial collection from the main root canal was performed. The root canals were prepared by using a WaveOne Gold large (45/.05) and distributed into 6 groups according to the activation of the final irrigation: ultrasonic activation (UA), XP-Endo Finisher (25/.00), XP Clean (25/.02), EasyClean (25/.04) in reciprocating motion and continuous rotary motion (ECRot), and conventional irrigation. After final irrigation, another bacterial collection from the main root canal was performed, and the root was sectioned transversely in three-thirds and stained for analysis by confocal laser microscopy. Intratubular bacteria were collected through dentin powder and plated for bacterial viability analysis. Intergroup and intragroup comparisons were performed by using analysis of variance and repeated measures analysis of variance, respectively, both at 5% significance. ECRot had higher antibacterial ability than UA (p<0.05), and both were superior to the other groups (p<0.05) in both methodologies. It can be concluded that activation of final irrigation enhances the disinfection of the root canal system, and activators have different efficacies

Resumo Este estudo avaliou a capacidade antibacteriana intratubular de diferentes irrigações ativadas após o preparo químico-mecânico. Setenta e dois canais palatinos de molares superiores foram contaminados com Enterococcus faecalis por 4 semanas, e então a coleta bacteriana inicial do canal principal foi realizada. Os canais foram preparados com WaveOne Gold large (45/.05) e distribuídos em 6 grupos de acordo com a ativação da irrigação final: ativação ultrassônica (UA), XP-Endo Finisher (25/.00), XP Clean (25/.02), EasyClean (25/.04) em movimento reciprocante e em movimento rotatório contínuo (ECRot) e irrigação convencional. Após a irrigação final, outra coleta bacteriana do canal principal foi realizada, e a raiz foi seccionada transversalmente em três terços e corada para análise por microscopia laser confocal. Bactérias intra tubulares foram coletadas através de pó de dentina e cultivadas para análise de viabilidade bacteriana. As comparações entre grupos e intragrupos foram realizadas usando análise de variância e análise de variância de medidas repetidas, respectivamente, ambas com 5% de significância. ECRot apresentou maior capacidade antibacteriana que UA (p<0,05), e ambos foram superiores aos demais grupos (p<0,05) em ambas as metodologias. Pode-se concluir que a ativação da irrigação final melhora a desinfecção do sistema de canais radiculares, e os ativadores têm eficácias diferentes.

Can a dentin bonding agent prevent color change in regenerative endodontic procedures? An in vitro evaluation

Abstract This in vitro study aimed to determine the efficacy of dentin bonding agents in preventing color changes following Regenerative Endodontic Procedures. One hundred twenty bovine incisors were endodontically prepared and randomly assigned to a two main factors design: application of a dentin bonding agent (Scotchbond Adper, 3M ESPE, St Paul, MN, USA) in the pulp chamber (Group 1, n=60) versus no bonding intervention (Group 2, n=60), and five levels of intracanal medication (n=12/subgroup): Triple antibiotic paste (TAP), double antibiotic paste (DAB), calcium hydroxide (CH), modified triple antibiotic paste (TAPM), and Control (CTL). Color changes were measured over 28 days at multiple time points (1, 3, 7, 14, 21, and 28 days) using the CIEDE2000 formula to calculate the color difference (ΔE00) from baseline (T0). The ΔE00 quantifies the perceptible color difference between the initial and final tooth color, with lower values indicating less discoloration. The results were analyzed using repeated measures ANOVA-2 and post-hoc Holm-Sidak tests. The TAP subgroups, both with and without the bonding agent, exhibited the highest color variation. However, a pulp chamber seal with a bonding agent showed a protective effect against discoloration compared to no seal, even though complete prevention was not achieved. All groups demonstrated ΔE00 values beyond acceptable interpretation thresholds for clinical application, primarily driven by a reduction in lightness (L*) and a decrease in redness (a* value, shifting towards green). In conclusion, while the pulp chamber seal with a bonding agent mitigated TAP-induced discoloration, it did not eliminate it.

Resumo Este estudo in vitro avaliou adesivos dentinários na prevenção de alterações de cor após procedimentos endodônticos regenerativos. Cento e vinte incisivos bovinos foram preparados endodonticamente e aleatoriamente designados para um desenho com dois fatores principais: aplicação de agente adesivo (Scotchbond Adper, 3M ESPE, St Paul, MN, EUA) na câmara pulpar (Grupo 1, n=60) versus não intervenção adesiva (Grupo 2, n=60), e cinco níveis de medicação intracanal (n=12/subgrupo): pasta de triantibiótica (TAP), pasta diantibiótica (DAB), hidróxido de cálcio (CH), pasta triantibiótica modificada (TAPM) e Controle (CTL). Alterações cromáticas foram monitoradas por 28 dias em intervalos (1, 3, 7, 14, 21, e 28 dias), usando CIEDE2000 para calcular a diferença de cor (ΔE00) em relação a cor inicial. O ΔE00 quantifica a diferença entre a cor inicial e final do dente, com valores menores indicando menos descoloração. Os resultados foram analisados usando ANOVA-2 de medidas repetidas e teste posthoc de Holm-Sidak. Os grupos utilizando medicação TAP, com ou sem adesivo, possuíram as maiores variações cromática. Contudo, o uso do adesivo na câmara pulpar mostrou um efeito protetor contra descoloração, em comparação com a ausência do selamento adesivo, embora a prevenção completa não tenha sido alcançada. Todos os grupos demonstraram valores de ΔE00 além dos limiares aceitáveis para aplicação clínica, principalmente devido à redução na luminosidade (L*) e redução no vermelho (a*, deslocando-se em direção ao verde). Em conclusão, enquanto o selamento da câmara pulpar com um agente adesivo mitigou a descoloração induzida pelo TAP, mas não a eliminou completamente.

Effect of pH on the solubility and volumetric change of ready-to-use Bio-C Repair bioceramic material

Abstract Acidic pH can modify the properties of repair cements. In this study, volumetric change and solubility of the ready-to-use bioceramic repair cement Bio-C Repair (BCR, Angelus, Londrina, PR, Brazil) were evaluated after immersion in phosphate-buffered saline (PBS) (pH 7.0) or butyric acid (pH 4.5). Solubility was determined by the difference in initial and final mass using polyethylene tubes measuring 4 mm high and 6.70 mm in internal diameter that were filled with BCR and immersed in 7.5 mL of PBS or butyric acid for 7 days. The volumetric change was established by using bovine dentin tubes measuring 4 mm long with an internal diameter of 1.5 mm. The dentin tubes were filled with BCR at 37°C for 24 hours. Scanning was performed with micro-computed tomography (micro-CT; SkyScan 1176, Bruker, Kontich, Belgium) with a voxel size of 8.74 µm. Then, the specimens were immersed in 1.5 mL of PBS or butyric acid at and 37 °C for 7 days. After this period, a new micro-CT scan was performed. Bio-C Repair showed greater mass loss after immersion in butyric acid when compared with immersion in PBS (p<0.05). Bio-C Repair showed volumetric loss after immersion in butyric acid and increase in volume after immersion in PBS (p<0.05). The acidic pH influenced the solubility and dimensional stability of the Bio-C Repair bioceramic cement, promoting a higher percentage of solubility and decrease in volumetric values.

Identification and antimicrobial susceptibility profile of bacteria isolated from primary endodontic infections

Abstract This study aimed to identify and characterize the antimicrobial susceptibility profile of bacteria found in primary endodontic infections in the teeth of patients treated at the Dental Clinic of the University of Ribeirão Preto, São Paulo, Brazil. From September to December 2019, samples were obtained from 21 patients with primary endodontic infections. The collections were carried out in triplicate using paper cones placed close to the total length of the root canal. Bacterial isolation was performed in Brain Heart Infusion agar, Blood agar, and other selective culture media cultured at 37°C for up to 48 h under aerobiosis and microaerophilic conditions. The bacterial species were identified using the Vitek 2 automated system. The disk diffusion method on agar Müeller-Hinton was used to assess antimicrobial susceptibility with the recommended antimicrobials for each identified bacterial species. A total of 49 antibiotics were evaluated. Fifteen of the 21 samples collected showed bacterial growth, and 17 bacterial isolates were found. There were 10 different bacterial species identified: Enterococcus faecalis (four isolates), Streptococcus mitis/oralis (three isolates), Streptococcus anginosus (three isolates) being the most common, followed by Staphylococcus epidermidis, Enterococcus faecium, Streptococcus constellatus, Streptococcus alactolyticus, Enterobacter cloacae, Klebsiella variicola, and Providencia rettgeri (one isolate of each species). The analysis demonstrated significant susceptibility to most of the tested antibiotics. However, some Enterococcus isolates resisted the antibiotic's erythromycin, ciprofloxacin, and tetracycline. A Staphylococcus epidermidis isolate was characterized as multidrug-resistant. Five Streptococcus isolates were non-susceptible to all antibiotics tested.

The effect of injectable platelet-rich fibrin and platelet-rich fibrin in regenerative endodontics: a comparative in vitro study

Abstract Objective To explore the feasibility of injectable platelet-rich fibrin (i-PRF) in regenerative endodontics by comparing the effect of i-PRF and platelet-rich fibrin (PRF) on the biological behavior and angiogenesis of human stem cells from the apical papilla (SCAPs). Methodology i-PRF and PRF were obtained from venous blood by two different centrifugation methods, followed by hematoxylin-eosin (HE) staining and scanning electron microscopy (SEM). Enzyme-linked immunosorbent assay (ELISA) was conducted to quantify the growth factors. SCAPs were cultured with different concentrations of i-PRF extract (i-PRFe) and PRF extract (PRFe), and the optimal concentrations were selected using the Cell Counting Kit-8 (CCK-8) assay. The cell proliferation and migration potentials of SCAPs were then observed using the CCK-8 and Transwell assays. Mineralization ability was detected by alizarin red staining (ARS), and angiogenesis ability was detected by tube formation assay. Real-time quantitative polymerase chain reaction (RT-qPCR) was performed to evaluate the expression of genes related to mineralization and angiogenesis. The data were subjected to statistical analysis. Results i-PRF and PRF showed a similar three-dimensional fibrin structure, while i-PRF released a higher concentration of growth factors than PRF ( P <.05). 1/4× i-PRFe and 1/4× PRFe were selected as the optimal concentrations. The cell proliferation rate of the i-PRFe group was higher than that of the PRFe group ( P <.05), while no statistical difference was observed between them in terms of cell mitigation ( P >.05). More importantly, our results showed that i-PRFe had a stronger effect on SCAPs than PRFe in facilitating mineralization and angiogenesis, with the consistent result of RT-qPCR ( P <.05). Conclusion This study revealed that i-PRF released a higher concentration of growth factors and was superior to PRF in promoting proliferation, mineralization and angiogenesis of SCAPs, which indicates that i-PRF could be a promising biological scaffold for application in pulp regeneration.

Aplicación de la crioterapia en endodoncia: su importancia en el control del dolor

Introducción: La endodoncia es la disciplina odontológica que estudia la morfología, fisiología y patología de la pulpa dentaria y del tejido perirradicular. Comprende la etiología, prevención, diagnóstico y tratamiento de las alteraciones pulpares, así como sus repercusiones en la región periapical y el resto del organismo. Su finalidad es aliviar el dolor y preservar las piezas dentales en función dentro del sistema estomatognático. El dolor que se origina en piezas dentarias o tejidos circundantes es uno de los principales motivos de consulta odontológica. Objetivo general: explicar el uso de la crioterapia en endodoncia. Objetivos específicos: analizar su mecanismo fisiológico de acción; la eficacia en la reducción del dolor en las terapias endodónticas con diferentes diagnósticos iniciales; describir sus formas de aplicación clínica; establecer las contraindicaciones o los posibles inconvenientes que pueda presentar su aplicación. Metodología: El trabajo es una revisión narrativa. Se realizó la búsqueda bibliográfica con los siguientes términos MeSH (Medical Subject Heading): cryotherapy, endodontic, intracanal irrigation, dental pain y sus correspondientes descriptores en ciencias de la salud DeCS: crioterapia, endodoncia, irrigación intracanal y dolor dental. Los criterios de inclusión fueron: artículos disponibles a texto completo que contengan al menos una palabra clave en título y/o resumen, en idioma inglés, español o portugués, sin límite temporal. Se excluyeron los artículos con estudios en animales o en piezas dentarias deciduas. Conclusiones: De acuerdo al presente trabajo existen estudios científicos que sostienen positivamente la aplicación de la crioterapia para el control del dolor en endodoncia.

Introdução: Endodontia é a disciplina odontológica que trata da morfologia, fisiologia e patologia da polpa dentária e do tecido perirradicular. Inclui a etiologia, prevenção, diagnóstica e tratamento das desordens pulpares, bem como suas repercussões na região periapical e no restante do organismo. O objetivo é aliviar a dor e preservar os dentes em função. A dor originada nos dentes ou tecidos circundantes é um dos principais motivos de consulta odontológica. Objetivo geral: explicar a aplicação da crioterapia na endodontia. Objetivos específicos: analisar seu mecanismo fisiológico de ação; a eficácia na redução da dor em terapias endodônticas com diferentes diagnósticos iniciais; descrever suas formas de aplicação clínica; estabelecer as contraindicações ou possíveis inconvenientes que a sua aplicação possa apresentar. Metodologia: O trabalho é uma revisão narrativa. A busca bibliográfica foi realizada com os seguintes termos MeSH (Medical Subject Heading): crioterapia, endodontia, irrigação intracanal, dor dentária e seus correspondentes descritores no DeCS ciências da saúde: crioterapia, endodontia, irrigação intracanal e dor dentária. Os critérios de inclusão foram: artigos disponíveis em texto completo que contenham pelo menos uma palavra-chave no título e/ou resumo, nos idiomas inglês, espanhol ou português, sem limite de tempo. Foram excluídos artigos com estudos em animais ou em dentes decíduos. Conclusões: De acordo com o presente trabalho, existem estudos científicos que apoiam positivamente a aplicação da crioterapia para controle da dor em endodontia.

Introduction: Endodontics is the dental discipline that deals with the morphology, physiology and pathology of the dental pulp and periradicular tissue. It includes the etiology, prevention, diagnosis and treatment of pulp disorders, as well as its repercussions in the periapical region and the rest of the organism. The purpose is to relieve pain and preserve the teeth in function. Pain originating from teeth or surrounding tissues is one of the main reasons for dental consultation. General objective: explain the implementation of cryotherapy in endodontics. Specific objectives: to analyze its physiological mechanism of action; the efficacy in reducing pain in endodontic therapies with different initial diagnoses; describe its forms of clinical application; establish the contraindications or possible inconveniences that its application may present. Methodology: The work is a narrative review. The bibliographic search was carried out with the following MeSH (Medical Subject Heading) terms: cryotherapy, endodontic, intracanal irrigation, dental pain and their corresponding descriptors in DeCS health sciences: cryotherapy, endodontics, intracanal irrigation and dental pain. The inclusion criteria were: articles available in full text that contain at least one keyword in the title and/or abstract, in English, Spanish or Portuguese, with no time limit. Articles with studies in animals or in deciduous teeth were excluded. Conclusions: According to the present work, there are scientific studies that positively support the application of cryotherapy for pain control in endodontics.

Prevalence and reasons for referrals to the Endodontics Specialty Clinic at the Piracicaba Dental School

Abstract Dental referrals to the Endodontics Specialty Clinic (ESC) are routine owing to the complexity of endodontic treatments. To obtain a better prognosis for treatment, students/dentists must perceive their technical limits. This study sought to investigate the referrals of patients to the ESC from different clinics of the Piracicaba Dental School, State University of Campinas - SP, Brazil, and check: a) the demographic profile of patients and the most commonly affected tooth; b) the clinic with the largest number of referrals; c) the reasons for referrals; d) the complexity of the cases; e) and the difficulty in assessing the referred cases based on the classification provided by the American Association of Endodontists (AAE) and Souza-Filho. The study sample consisted of patients' electronic dental referral records from February 2015 to June 2019. A total of 1,707 patients were referred to the ESC during the study period, and 62.4% were female. Lower molars were the most frequently involved teeth (34.8%), and 60.7% of the cases were referred due to the presence of root curvature. The AAE classification showed prevalence of highly difficult cases (71.3%), whereas Souza-Filho classification demonstrated a high rate of class III cases (85.8%). This study highlights the difficulties encountered by undergraduate students before or during endodontic treatments, reinforcing the need for clear criteria for selecting cases appropriate for each education level, thus improving endodontic treatment prognosis.

Comparative in vitro analysis of the antifungal activity of different calcium silicate-based endodontic sealers

Aim: This study aimed to perform an in vitro comparative analysis of the antifungal activity of different calcium silicate-based endodontic sealers against three fungal species. Methods: The antifungal properties of three calcium silicate-based sealers were tested: Bio-C Sealer, Cambiar a Sealer Plus BC, and MTA-Fillapex. Two commonly used sealers were used as controls: AH Plus and Endomethasone. An agar diffusion test was performed to analyze the antifungal activity of the sealers against Candida albicans, Candida glabrata, Candida tropicalis, and a mixed microbial culture medium. The results were analyzed using ANOVA (p <0.05). Results: Endomethasone exhibited the highest inhibition against all strains examined, maintaining a consistent level of inhibition throughout 7 days. MTA-Fillapex demonstrated the best performance among the calcium silicate-based sealers for the three fungal species (p < 0.05), maintaining stable values over the 7 days, surpassing that of Endomethasone. Nevertheless, MTA-Fillapex only exhibited antimicrobial effect against the mixed culture for the first 24 hours, and no antimicrobial activity was observed at 48 hours, being surpassed by all tested sealers (p < 0.05). Conclusion: Of all silicate-based sealers tested, only MTA-Fillapex exhibited promising antifungal activity. Nevertheless, care must be taken when extrapolating these results, as MTA-Fillapex exhibited poor antimicrobial activity when tested in mixed microbial cultures

Accuracy of the integrated electronic apex locator in locating simulated perforation under various irrigating solutions in an in vitro study

Aim: This study's objective was to assess the accuracy of the integrated apex locator in identifying artificial root canal perforations in the presence of saline, chlorhexidine, sodium hypochlorite, QMix, and MTAD. Methods: The root canals of 60 single-rooted extracted human teeth were perforated artificially at a point 10 mm away from the root apex. After measuring the actual lengths up to the perforation point, the teeth were then put within an alginate mould for measurements using an integrated apex locator. Using a #20 K-file in the presence of NaCl, CHX, MTAD, NaOCl, and QMix, an electronic apex locator was used to measure the perforations electronically in accordance with the manufacturer's instructions. Between the measurements, each canal was dried with paper points after being irrigated with distilled water. The accuracy of all the readings was calculated at ± 0.5 mm. Statistical analyses were performed using the Z-test. Results: In comparison to the MTAD, NaOCl, and Qmix, saline and chlorhexidine scored more readings in the ± 0.5 mm range of the perforation site, and the difference was statistically significant. Conclusion: The most precise electronic measurements of artificial perforation were obtained in the presence of chlorhexidine or saline

Análisis radiográfico comparativo de tratamientos endodónticos: su posible aporte en la identificación forense / Comparative radiographic analysis of endodontic treatments: its possible contribution to forensic identification

Introducción: La identificación por cotejo de regis-tros odontológicos representa una metodología científicamente consolidada. La estrategia más co-mún reside en la comparación de odontogramas impresos o digitalizados, aunque se ha cuestionado cierta subjetividad al asentar dicha información. Los recursos imagenológicos constituyen una evidencia más confiable y objetiva, reduciendo el sesgo iden-tificatorio. La obtención de radiografías post mor-tem (PM) reproduciendo en lo posible las técnicas que han generado las imágenes ante mortem (AM) recuperadas, otorga una eficaz modalidad compa-rativa, aumentando su valor probatorio. Materiales y Métodos: Se efectuó la comparación entre radio-grafías panorámicas y periapicales tomadas a 10 pacientes atendidos en un consultorio particular de la ciudad de Quilmes, Provincia de Buenos Aires, don-de se visualizaban tratamientos de endodoncia. Los registros de ambas técnicas de imágenes se realiza-ron sobre los mismos sujetos entre los años 2010 y 2022. Se cotejaron 11 radiografías periapicales y 10 panorámicas, procediéndose a la digitalización de la totalidad de la muestra. Se clasificaron las imágenes de cada persona conforme a la fecha de obtención de las mismas. A las más antiguas se las catalogó con el color verde, representando el material AM, mien-tras que las más recientes se marcaron en color rojo, constituyendo la información PM. Resultados: Teniendo en cuenta los criterios estipulados por la Junta Americana de Odontología Forense (ABFO) se identificaron positivamente 7 casos estudiados, 2 fueron catalogados como identificación posible, en tanto que 1 se clasificó como insuficiente. No se re-gistraron exclusiones. Conclusión: Los tratamientos endodónticos podrían suministrar información pon-derable en procesos de identificación humana en virtud de la escasa probabilidad de sufrir alteracio-nes morfológicas y estructurales por su estratégica localización intradentaria, otorgando posibilidades concretas de establecer la identidad categórica de sujetos desconocidos (AU)

Introduction: Identification by comparison of dental records represents a scientifically consolidated methodology. The most common strategy lies in the comparison of printed or digitised odontograms, although certain subjectivity has been questioned when recording said information. Imaging resources constitute more reliable and objective evidence, reducing identification bias. Obtaining post-mortem (PM) radiographs reproducing the techniques that have generated the recovered ante-mortem (AM) images, provides an effective comparative modality, increasing its evidentiary value. Materials and Methods: A comparison was made between panoramic and periapical radiographs taken to 10 patients treated in a private office in the city of Quilmes, Province of Buenos Aires, where endodontic treatments were visualized. The records of both imaging techniques were carried out on the same subjects between 2010 and 2022. 11 periapical and 10 panoramic radiographs were collected, and the entire sample was digitized. The images of each person were classified according to the date they were obtained. The oldest ones were cataloged with the color green, representing the AM material, while the most recent ones were marked in red, constituting the PM information. Results: Taking into account the criteria stipulated by the American Board of Forensic Odontology (ABFO), 7 cases studied were positively identified, 2 were classified as possible identification, while 1 was classified as insufficient. No exclusions were recorded. Conclusion: Endodontic treatments could provide valuable information in human identification processes due to the low probability of suffering morphological and structural alterations due to their strategic intradental location, providing concrete possibilities of establishing the categorical identity of unknown subjects (AU)

Frecuencia y tipología del segundo conducto mesiovestibular en primeros molares superiores / Frequency and typology of the second mesiobuccal canal in maxillary first molars

Objetivos: Evaluar mediante microscopia quirúrgica la presencia del segundo conducto mesiovestibular (MV2) en el piso de la cámara pulpar de los primeros molares superiores, determinar su abordabilidad, establecer el calibre de lima que llegó al tercio apical y tipificar radiovisiográficamente su morfología se-gún la clasificación de Weine. Materiales y métodos: Se utilizaron 48 primeros molares superiores huma-nos extraídos. Sé tomaron radiovisografías preope-ratorias (Carestream 5200) en sentido orto radial y mesio-distal. Se realizó apertura y se localizó entra-da del MV2 con microscopio quirúrgico (Newton MEC XXI, Argentina) a 16 x. Se cateterizó MV1 y MV2 con limas tipo K #10 y #15 (Dentsply Maillefer). Se cortó raíz distovestibular para mejorar visualización ra-diovisográfica. Se tomó conductometria en sentido mesio-distal para establecer la tipología. Se compa-raron frecuencias y porcentajes mediante test de Chi-cuadrado con corrección de Yates, prueba exac-ta de Fisher y test z para diferencia de proporcio-nes. Se calcularon intervalos de confianza 95% para porcentajes mediante método score de Wilson. Re-sultados: El 54% (26 casos) presentó MV2. De los 26 MV2, el 77% (20 casos) fueron abordables, porcen-taje significativamente mayor al 23% no abordable (z=3,62; P<0,05). Al hacer cateterismo, hubo asocia-ción significativa entre tipo de conducto (MV1 y MV2) y calibre de lima que llegó al tercio apical (Chi-cua-drado=29,12; gl=1; P<0,05). La tipología I (58%) fue significativamente mayor que las tipologías II (21%) y III (21%) (P<0,05 para ambas comparaciones). Con-clusión: El alto porcentaje de piezas que presentó MV2 evidencia la importancia clínica de detectarlo y tratarlo correctamente. Dado el alto porcentaje de piezas donde fue abordable, se concluye que el clíni-co debe tener conocimiento, destreza y la tecnología necesaria para poder abordarlo. Si bien la tipología I (58%) fue la más encontrada, cuando el MV2 termina en foramen independiente (tipo III), su omisión puede conducir al fracaso del tratamiento (AU))

Objectives: To evaluate by surgical microscopy the presence of second mesiobuccal canal (MB2) in the pulp chamber floor of the maxillary first molars, determine its approachability, establish the caliber of the file that reached the apical third, and radiographically typify its morphology according to Weine ́s classification. Materials and methods: 48 extracted human maxillary first molars were used. Preoperative radiovisographies (Carestream 5200) were taken in ortho-radial and mesio-distal direction. Coronal access was made and the entrance of MB2 was located with a surgical microscope (Newton MEC XXI, Argentina) at 16x. MB1 and MB2 were catheterized with K files #10 and #15 (Dentsply Maillefer). Distobuccal root was cut to improve radiovisographic visualization. Conductometry was taken in mesio-distal direction to establish the typology. Frequencies and percentages were compared using Chi-square test with Yates correction, Fisher's exact test and z test for difference in proportions. 95% confidence intervals were calculated for percentages using Wilson score method. Results: 54% (26 cases) presented MB2. Of the 26 MB2, 77% (20 cases) were approachable, a significantly higher percentage than those not approachable (z=3.62; P<0.05). When performing catheterization, there was a significant association between type of canal (MB1 and MB2) and file caliber that reached the apical third (Chi-square=29.12; df=1; P<0.05). Typology I (58%) was significantly higher than typologies II (21%) and III (21%) (P<0.05 for both comparisons). Conclusion: The high percentage of specimens that showed MB2 evidence the clinical importance of detecting and treating it correctly. Given the percentage of pieces where it was approachable (77%), it is concluded that the clinician must have the knowledge, skill and necessary technology to be able to approach it. Although typology I (58%) was the most found, when MB2 ends an independent foramen (type III), its omission can lead to treatment failure (AU)

Evaluación de la filtración apical al utilizar dos selladores biocerámicos / Evaluation of apical leakage when using two bioceramic sealers

Objetivo: Evaluar con técnica de diafanización el gra-do de filtración apical al utilizar dos selladores bio-cerámicos y la técnica de cono único con taper ex vivo. Materiales y métodos: Se utilizaron 60 premola-res inferiores humanos uniradiculares extraídos. La instrumentación se realizó con lima Primary 25/.07 (WaveOne Gold, Dentsply Maillefer), según protocolo del fabricante. Se irrigó con NaOCl 2,5% y EDTAC 17%. Para la obturación, la muestra se dividió aleatoria-mente en 4 grupos (n=15). Grupo 1: Cono único y Bio C Sealer. Grupo 2: Cono único y MTA Fillapex. Grupo control negativo: no se obturó. Grupo control positi-vo: Cono único y AH Plus. En todas las muestras se aplicaron dos capas de esmalte para uñas en toda la superficie dentaria con excepción del tercio apical y del grupo control positivo, que se esmaltó en su tota-lidad. Medio de filtración: tinta china negra por difu-sión pasiva. Se diafanizó con técnica de Robertson. Se usó programa AutoCad 2022, para medir filtración en milímetros lineales. Los datos se analizaron me-diante prueba de Kruskal-Wallis seguida por compa-raciones post hoc empleando el método de Conover (p<0,05, significativo). Resultados: La filtración con Bio C Sealer, MTA Fillapex, control negativo y control positivo tuvo una media (mínimo-máximo) de 0 (0-2), 1 (0-3), 6 (2-12) y 0 (0-0); sin diferencias significativas entre Bio C Sealer y MTA Fillapex (p>0,05), ni entre Bio C Sealer y control positivo (p>0,05); pero con di-ferencias significativas entre MTA Fillapex y control positivo (p<0,05), y entre control negativo y cual-quiera de los otros tres grupos (p<0,05). Conclusión: La obturación con Bio C Sealer lograría un nivel de sellado similar al que se obtiene con el control po-sitivo; mientras que la obturación con MTA Fillapex produciría un sellado ligeramente menos efectivo que el control positivo. Sin embargo, la filtración no variaría sustancialmente entre obturaciones con Bio C Sealer y MTA Fillapex (AU)

Objective: To evaluate the degree of apical filtration with diaphanization technique, using two bioceramic sealers and single cone technique with taper, ex vivo. Materials and methods: 60 extracted single-root human mandibular premolars were used. The instrumentation was carried out with primary file 25/.07 (WaveOne Gold, Dentsply Maillefer), according to the manufacturer's protocol. Irrigation was done with 2.5% NaOCl and 17% EDTAC. For obturation, the sample was randomly divided in 4 groups (n=15). Group 1: Single cone and Bio C Sealer. Group 2: Single cone and MTA Fillapex. Negative control group: it was not obturated. Positive control group: Single cone and AH Plus. In all samples, two layers of nail polish were applied to the entire tooth surface with exception of apical third and the positive control group, which was completely glazed. Filtration medium: black Chinese ink by passive diffusion. It was diaphanized with Robertson technique. AutoCad 2022 program was used to measure filtration in linear millimeters. Data were analyzed using Kruskal-Wallis test, followed by post hoc comparisons using Conover method (p < 0.05, significant). Results: Filtration with Bio C Sealer, MTA Fillapex, negative control and positive control had a mean (minimum-maximum) of 0 (0-2), 1 (0-3), 6 (2-12) and 0 (0-0); no significant differences between Bio C Sealer and MTA Fillapex (p > 0.05), nor between Bio C Sealer and positive control (p > 0.05); but with significant differences between MTA Fillapex and positive control (p < 0.05), and between negative control and any of the other three groups (p < 0.05). Conclusion: Obturation with Bio C Sealer would achieve a level of sealing similar to obtained with the positive control; while obturation with MTA Fillapex would produce a slightly less effective seal than the positive control. However, filtration would not vary substantially between fillings with Bio C Sealer and MTA Fillapex (AU)

Protocolo para la medición de espacios vacíos dentro de la obturación endodóntica con microtomografía / A protocol for the measurement of voids within the endodontic filling with microtomography

La microtomografía es un estudio que utiliza la ra-diación X para obtener imágenes de tamaños de mi-lésimas de milímetros y de alta resolución. Las imá-genes 2D son procesadas por diferentes softwares para lograr obtener volúmenes capaces de ser ana-lizados tridimensionalmente. La microtomografía es el estudio de elección a la hora de evaluar caracte-rísticas muy pequeñas con gran precisión. La obtu-ración endodóntica buscar lograr un sellado que no tenga espacios vacíos dentro de la masa de obtura-ción. Esto es importante debido a que los poros pue-den permitir, si están en contacto con la pared den-tinaria, la entrada de microorganismos al conducto radicular. El objetivo de este trabajo fue describir el procedimiento para el análisis y visualización de los espacios vacíos dentro de la obturación endodónti-ca, utilizando la microtomografía de rayos x, y esta-blecer un protocolo para ser utilizado por cualquier investigador(AU)

Microtomography is a study that uses X-radiation to obtain high-resolution images of sizes of thousandths of millimeters. The 2D images are processed by different software to obtain volumes capable of being analyzed three-dimensionally. Microtomography is the study of choice when evaluating very small features with great precision. Endodontic filling seeks to achieve a seal that does not have voids within the filling obturation. This is important because the voids can allow, if they are in contact with the dentin wall, the entry of microorganisms into the root canal. The objective of this work was to describe the procedure for the analysis and visualization of voids within the endodontic filling using microtomography and to establish the protocol to be used by any researcher (AU)

Avances en endodoncia regenerativa: reporte de caso con uso de la membrana amniótica humana / Advances in regenerative endodontics: report of a case using a human amniotic membrane

Los procedimientos endodónticos regenerativos (REPs) representan una evolución significativa en el campo de la endodoncia, buscando no sólo tratar la infección o lesión presente en el diente, sino tam-bién promover la regeneración de los tejidos denta-rios afectados. El presente caso clínico muestra un incisivo lateral superior izquierdo con apexogénesis incompleta y diagnóstico de absceso alveolar crónico reagudizado en una paciente de 22 años, en el que se aplicó un procedimiento de endodoncia regenerativa (REPs). La estrategia terapéutica elegida se basó en los principios de ingeniería tisular, incorporando la novedosa aplicación de la membrana amniótica hu-mana liofilizada esterilizada como andamio bioactivo intraconducto. Las evaluaciones clínicas, radiográ-ficas y tomográficas a corto, mediano y largo plazo revelaron el éxito de la terapia. La resolución exitosa mostró en los controles a la pieza dentaria asintomá-tica, con una notable remisión de la patología apical, aumento de la longitud radicular y disminución del calibre apical. Se ha podido destacar la eficacia de los REPs, con una exitosa aplicabilidad de la membra-na amniótica como andamio innovador (AU)

Regenerative endodontic procedures (REPs) represent a significant evolution in the field of endodontics, aiming not only to address the infection or injury within the tooth, but also to promote the regeneration of the affected dental tissues. In this clinical case, an upper left lateral incisor with incomplete apexogenesis and diagnosis of acute exacerbation of a chronic periapical lesion in a 22-year-old patient is presented. A regenerative endodontic procedure (REPs) was applied. The chosen therapeutic strategy was based on tissue engineering principles, incorporating the innovative use of sterilized lyophilized human amniotic membrane as an intraconduct bioactive scaffold. Clinical, radiographic, and tomographic assessments at short, medium, and long-term follow-up revealed the success of the therapy. Successful resolution demonstrated an asymptomatic tooth in the follow-up, with a notable resolution of apical pathology, increased root length, and decreased apical caliber. The effectiveness of REPs has been highlighted, demonstrating the successful applicability of amniotic membrane as an innovative scaffold (AU)

Prevalencia de conductos en C de segundos molares mandibulares evaluados en tomografía de haz cónico / Prevalence of C-ducts of Mandibular Second Molars Evaluated on Cone Beam Tomography

Introducción: El conocimiento adecuado de la configuración de conductos radiculares es fundamental en endodoncia; la evaluación tomográfica permite una correcta evaluación de su disposición radicular. Objetivo: Determinar la prevalencia de conductos en C de segundos molares mandibulares, evaluados en tomografía de haz cónico. Métodos: Se realizó un estudio descriptivo y de corte transversal; la muestra estuvo conformada por 200 segundos molares mandibulares permanentes de una población peruana, observadas en tomografías cone beam, donde se registró la presencia del conducto en C, su configuración según la clasificación de Fan y el sexo del paciente. Resultados: La prevalencia de la configuración radicular en forma de C en segundos molares inferiores fue del 65,5 por ciento; según la Clasificación de Fan se observó mayor prevalencia en el tercio cervical del conducto radicular el tipo C1 con 85,7 por ciento; en el tercio medio el tipo C2 con 42,9 por ciento; a nivel apical fue el tipo C3C con 72,1 por ciento; según el sexo, el 65,2 por ciento de los conductos en C correspondió al femenino. Conclusión: La prevalencia de los conductos en C de los segundos molares mandibulares evaluados en tomografías de haz cónico fue de 65,5 por ciento con mayor predominio en el sexo femenino. La evaluación tomográfica permite una mejor identificación y configuración interna de los conductos radiculares(AU)

Introduction: Adequate knowledge of the configuration of root canals is fundamental in endodontics; tomographic evaluation allows a correct assessment of their radicular arrangement. Objective: To determine the prevalence of C-shaped canals in mandibular second molars, evaluated by cone beam tomography. Methods: A descriptive and cross-sectional study was carried out; the sample consisted of 200 permanent mandibular second molars from a Peruvian population, observed in cone beam tomography, where the presence of the C-shaped canal, its configuration according to Fan's classification and the patient's gender were recorded. Results: The prevalence of the C-shaped root canal configuration in lower second molars was 65.5 percent; according to the Fan classification, the highest prevalence was observed in the cervical third of the root canal, type C1 with 85.7 percent; in the middle third, type C2 with 42.9 percent; at the apical level it was type C3C with 72.1 percent; according to gender, 65.2 percent of the C-shaped canals corresponded to females. Conclusion: The prevalence of C-shaped canals in mandibular second molars evaluated in cone beam tomography was 65.5% with a higher predominance in the female gender. The tomographic evaluation allows a better identification and internal configuration of the root canals(AU)

Extrusão apical de irrigantes em dentes imaturos utilizando diferentes dispositivos de irrigação por pressão negativa / Apical extrusion of irrigants in immature teeth using different negative pressure irrigation devices

Objetivo: O objetivo deste estudo foi avaliar a extrusão apical de irrigantes em dentes imaturos simulados, comparando a irrigação convencional com outros dispositivos de irrigação por pressão negativa. Materiais e Métodos: 48 amostras de dentes imaturos simulados foram montadas em um modelo adaptado para conter o irrigante extravasado e distribuídas igualmente em 4 grupos (n=12) de acordo com o dispositivo de irrigação utilizado: Grupo Irrigação Convencional (IC), Grupo EndoVac (EV), Grupo Pulp Sucker (PS) e Grupo Ivac (IV). As amostras foram irrigadas com 15mL de solução irrigadora, sendo 10mL de NaOCl a 2,5% e 5mL de EDTA a 17% intercalados. As amostras foram pesadas em balança de precisão antes e depois dos procedimentos de irrigação, sendo a diferença entre os pesos final e inicial considerado o volume de irrigante extravasado. Os dados foram coletados e analisados estatisticamente pelos testes de Kruskal-wallis e exato de Fisher. Resultados: Os grupos que utilizaram pressão negativa promoveram significativamente menor volume de irrigante extravasado que o grupo IC (p<0,05), não havendo diferenças significativas quando comparados entre si (p>0,05). Houve diferenças significativas na associação entre os grupos e a extrusão de irrigante, sendo o grupo PS menos associado a extrusão de irrigante (p<0,005). Discussão: Estudos anteriores apontam os dispositivos de pressão negativa como opções seguras diante de extravasamento de irrigantes quando comparados à irrigação convencional. Conclusão: A irrigação convencional promoveu significativamente maior volume de extrusão de irrigante quando comparada aos dispositivos de irrigação por pressão negativa. O sistema PulpSucker mostrou extravasamento de irrigante em um número significativamente menor de amostras.

Aim: The aim of this study was to evaluate the apical extrusion of irrigants in simulated immature teeh, comparing convencional irrigation with other negative pressure irrigation devices. Materials and methods: 48 samples of simulated immature teeth were set up in an adapted model to contain the extravasated irrigant and evenly distributed into 4 groups (n=12) according to the device used: Convencional Irrigation Group (CI), EndoVac Group (EV), Pulp Sucker Group (PS) and Ivac Group (IV). The samples were irrigated with 15mL of irrigant solution, consisting of 10mL NaOCl 2,5% and 5mL EDTA 17%, in na alternating sequence. The samples' weights were measured using a precision scale before and after the irrigation procedures, with the difference between de final and initial weights considered the volume of extravasated irrigant. Data were collected and statistically analyzed by Kruskal-wallis and Fisher exact tests. Results: The groups that used negative pressure devices significantly promoted a lower volume of extruded irrigant than the CI group (p<0,05), with no significant differences between the negative pressure groups (p>0,05). There were signficant differences in the association between the groups and irrigant extrusion, with the PS group showing significantly less association with irrigant extrusion (p<0,005). Discussion: Previous studies have indicated that negative pressure devices are safe alternatives to convencional irrigation when considering irrigant extrusion. Conclusion: Conventional irrigation promoted a significantly greater volume of irrigant extrusion when compared to negative pressure irrigation devices. The PulpSucker system showed irrigant extravasation in significantly fewer samples.

Physico-Chemical comparison of four commercially available mineral trioxide aggregates / Comparación fisicoquímica de cuatro mineral trióxido agregados disponibles comercialmente

Abstract To compare the physicochemical composition of 4 MTAs commercially available in Latin America. ProRoot MTA (Dentsply, USA), MTA Angelus (Angelus, Brazil), MTA Flow (Ultradent, USA), and MTA Viarden (Viarden, Mexico) were physically and chemically compared. Scanning electron microscopy (SEM) images were obtained from the MTA powder and the prepared presentations. Energy Dispersive X-Ray Spectroscopy (EDS) analyses were performed by triplicate, to calculate the mass proportion of calcium (Ca), silicon (Si), the Ca/Si proportion among the 4 brands. Thermogravimetric analyses (TGA) were conducted (50ºC-1000ºC), and mass loss and inflection points were calculated for each material. Statistical differences for Ca and Si content were determined by ANOVA (p<0.05). SEM images showed evident differences in the appearance of both the powder and the prepared MTAs among brands. Angelus MTA showed cubic prisms not observed in the other 3 brands. ProRoot MTA and MTA Flow showed similar homogeneous structures. MTA Viarden was the less homogeneous, with random structures (>15um). When comparing the mass proportions of Ca and Si between the 4 powder samples, MTA Viarden showed a significantly lower proportions of both elements when compared with the other brands (p<0.005). TGA análisis showed a similar behavior for ProRoot MTA, MTA Angelus and MTA Flow, with less than 2% mass loss when the 1000C temperature was reached. MTA Viarden showed a mass loss of 9,94% before the 700C, indicating the presence of different content sensible to temperature degradation. The analyzed MTAs demonstrated to vary significantly in their chemical composition and physical characteristics. Clinicians must be aware of the differences between different brands of a same material, and future research should focus on the clinical implications of these differences.

Resumen Comparar la composición fisicoquímica de 4 MTA disponibles comercialmente en América Latina. Se compararon física y químicamente ProRoot MTA (Dentsply, EE. UU.), MTA Angelus (Angelus, Brasil), MTA Flow (Ultradent, EE. UU.) y MTA Viarden (Viarden, México). Se obtuvieron imágenes de microscopía electrónica de barrido (SEM) del polvo de MTA y de las presentaciones preparadas. Los análisis de espectroscopía de dispersión de energía de rayos X (EDS) se realizaron por triplicado para calcular la proporción de masa de calcio (Ca), silicio (Si), la proporción Ca/Si entre las 4 marcas. Se realizaron análisis termogravimétricos (TGA) (50ºC-1000ºC), y se calcularon las pérdidas de masa y los puntos de inflexión para cada material. Las diferencias estadísticas para el contenido de Ca y Si se determinaron mediante ANOVA (p<0,05). Los análisis SEM mostraron diferencias evidentes en la apariencia tanto del polvo como las preparaciones de los MTA, entre las diferentes marcas. MTA Angelus mostró prismas cúbicos no observados en las otras 3 marcas. ProRoot MTA y MTA Flow mostraron estructuras homogéneas similares. MTA Viarden fue el menos homogéneo, con estructuras aleatorias (>15um). Al comparar las proporciones de masa de Ca y Si entre las 4 muestras de polvo, MTA Viarden mostró proporciones significativamente más bajas de ambos elementos en comparación con las otras marcas (p<0,005). El análisis TGA mostró un comportamiento similar para ProRoot MTA, MTA Angelus y MTA Flow, con menos del 2 % de pérdida de masa al alcanzar los 1000 °C de temperatura. El MTA Viarden mostró una pérdida de masa de 9,94% antes de los 700 °C, indicando la presencia de diferentes contenidos sensibles a la degradación por temperatura. Los MTA analizados demostraron diferencias significativas en su composición química y características físicas. Los clínicos deben ser conscientes de las diferencias entre las diferentes marcas de un mismo material, y futuras investigaciones deben enfocarse en las implicaciones clínicas de estas diferencias.