Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 9 de 9
Filter
1.
Braz. j. otorhinolaryngol. (Impr.) ; 88(supl.5): 100-107, Nov.-Dec. 2022. tab, graf
Article in English | LILACS-Express | LILACS | ID: biblio-1420888

ABSTRACT

Abstract Objective: To evaluate, by a three-dimensional study, the volumetric and integumentary effects of rapid maxillary expansion on the nose, in mouth breathing kids with maxillary hypoplasia, in the short term, assessing the possible interference of gender, growth and age on the results achieved. Methods: 120 mouth breathing patients with maxilla hypoplasia were divided into an Experimental Group treated by rapid maxillary expansion (n = 104, 62 males and 42 females, mean age 10.1 years, SD = 2.10, ranging from 5.1 to 13.9 years); and Control Group, constituted by 16 patients (9 males and 7 females, mean age 9.3 years, SD = 2.1 years, ranging from 6.1 to 13.2 years). Patients in the experimental group underwent multislice computed tomography examinations at two different times: (T1) pre-expansion and (T2) post-expansion. The control group was submitted to the same tests at the same time intervals. Six soft tissue variables of the nose were studied, besides the volume and area of the nasal cavity, and the measurement and comparison of data between T1 and T2 were performed using the Dolphin Imaging 11.7 Premium software. Results: The experimental group showed significant mean increases in all soft tissue variables studied (p < 0.005), yet there were no significant changes in the control group. In the comparison between groups, only inclination of the nasal dorsum did not present any significant change. Conclusion: Rapid maxillary expansion may alter the nasal shape and physiology, by anatomical changes in the nose soft tissues, making it an important aid in the treatment of mouth breathing in childhood. Level of evidence: The soft tissues of the nose play an important role in nasal shape and physiology and facial esthetics, and since they are directly related to the nasal valves, they are fundamental for maintenance and stability of the nasal breathing pattern.

2.
Rev. cuba. estomatol ; 58(4)dic. 2021.
Article in English | LILACS, CUMED | ID: biblio-1408350

ABSTRACT

Introduction: Negative maxillary transverse discrepancy is not exclusive to narrow upper arch. The transverse discrepancy due to maxillary deficiency is well described, but this is not the case when the maxilla displays adequate dimensions and the origin of the problem is an excess of mandibular width. Objective: To describe the cephalometric characteristics of negative maxillary transverse discrepancy present in narrow upper arches with those of normal or increased width. Methods: An observational and cross-sectional study was carried out in records of patients with negative maxillary transverse discrepancy. The cases referred to the maxillofacial surgery department at Hospital Clínico Quirúrgico "Hermanos Ameijeiras" between January 2016 and January 2020 were selected. The initial study models were measured and two groups were formed: those with a distance between central fossae of 16 to 26, less than 47 mm and the other with equal or greater values. Lateral cephalometric analysis of Ricketts, McNamara, Björk & Jarabak, Burstone and soft profile were performed on the initial teleradiographs. Using the Mann Whitney U test of independent samples, measurements with statistically significant differences between both groups were selected. (p <0.05). Results: Significant differences were found regarding the cranial-mandibular relationship, mandibular anatomy, maxillo-mandibular relationship and occlusal relationship. The most important differences observed in each group were respectively: S-Ar / Ar-Go ratio (p = 0.033), mandibular body length (p = 0.01), mandibular-maxillary difference (p = 0.003) and overjet (p = 0.043). Conclusions: In the studied patients, negative maxillary transverse discrepancy has the same probability of presenting a wide or in norm upper arch, as well as a narrow arch. In the first case, it is more likely to find jaws with increased body length, a skeletal class III pattern and a concave profile; in the second case, the tendency is to present small jaws with increased articular angle and dental overjet(AU)


Introducción: La discrepancia negativa transversal del maxilar no es exclusiva de una arcada superior angosta. La discrepancia transversal por deficiencia maxilar está bien descrita, pero no ocurre así cuando el maxilar se presenta con dimensiones adecuadas y el origen del problema es un exceso del ancho mandibular. Objetivo: Describir las diferencias cefalométricas de la discrepancia negativa transversal del maxilar que presentan arcadas superiores estrechas con aquellas de ancho normal o incrementado. Métodos: Se realizó un estudio observacional, de corte transversal, en expedientes de pacientes con discrepancia negativa transversal del maxilar. Se seleccionaron los casos que acudieron entre enero del 2016 y enero del 2020 a la consulta de cirugía maxilofacial del Hospital Clínico Quirúrgico "Hermanos Ameijeiras". Se midieron los modelos de estudio iniciales y se conformaron dos grupos: aquellos con distancia entre fosas centrales de 16-26, menor de 47 mm y el otro con valores iguales o superiores. Se realizaron análisis cefalométricos laterales en las telerradiografías iniciales de Ricketts, McNamara, Björk & Jarabak, Burstone y perfil blando. Por medio de la prueba U de Mann Whitney de muestras independientes, se seleccionaron las mediciones con diferencias estadísticas significativas entre ambos grupos (p < 0.05). Resultados: Se encontraron diferencias significativas concernientes a la relación cráneo mandibular, anatomía mandibular, relación máxilo mandibular y relación oclusal. Las diferencias observadas más importantes de cada grupo fueron respectivamente: relación S-Ar/Ar-Go (p = 0,033), longitud del cuerpo mandibular (p = 0,01), diferencia mandibular-maxilar (p = 0,003) y resalte (p = 0,043). Conclusiones: En los pacientes estudiados, las discrepancias negativas transversales tienen la misma probabilidad de presentarse con la arcada superior ancha o en norma, que angosta. En los primeros es más probable encontrar mandíbulas con longitud del cuerpo incrementada, patrón de clase III esquelética y perfil cóncavo; en los segundos, la tendencia es a presentar mandíbulas pequeñas con ángulo articular y resalte dentario aumentados(AU)


Subject(s)
Humans , Cephalometry/methods , Overbite , Orthognathic Surgery/methods , Malocclusion , Cross-Sectional Studies , Statistics, Nonparametric , Observational Studies as Topic
3.
Rev. otorrinolaringol. cir. cabeza cuello ; 81(4): 545-550, dic. 2021. ilus, tab
Article in Spanish, Portuguese | LILACS | ID: biblio-1389805

ABSTRACT

Las discrepancias dento-esqueletales severas presentan un reto para el cirujano maxilofacial, existe una versatilidad de osteotomías para las diferentes anomalías del crecimiento y desarrollo, sin embargo, son pocas las que permiten mejorar la proyección malar. La osteotomía Le Fort III modificada fue utilizada en un principio en pacientes con algún síndrome craneofacial, pero actualmente es una alternativa útil para discrepancias severas en pacientes no sindrómicos, ya que permite un avance cigomático-maxilar, favorece la proyección malar y disminuye la exposición escleral con un número limitado de complicaciones. Se presenta el caso de un paciente masculino de 33 años con antecedente de fractura orbitocigomática y piso orbitario izquierda con una discrepancia dento-esqueletal severa, la que fue tratada mediante osteotomía Le Fort III modificada, osteotomías sagitales mandibulares para un avance máxilo-malar y retroceso mandibular respectivamente y una genioplastia de avance; logrando un resultado funcional y estético adecuado.


The dento-skeletal severe discrepancies present a challenge for the maxillofacial surgeon, there is a versatility of osteotomies for the different growth and development anomalies, however, a few of them make possible to improve malar projection. The modified Le Fort III osteotomy was originally used in patients with some craniofacial syndrome, but now it is a useful alternative for severe discrepancies in non-syndromic patients, since it allows a zygomatic-maxillary advance, favors malar projection and reduces scleral exposure with a limited number of complications. The case of a 33-year-old male patient with a history of orbitozygomatic fracture and left orbital floor with a severe dento-skeletal discrepancy is presented, who was treated by modified Le Fort III osteotomy, mandibular sagittal osteotomies for maxillo-malar advancement and retrogression mandibular respectively and geniplasty for advance; achieving a suitable functional and aesthetic result.


Subject(s)
Humans , Male , Adult , Osteotomy, Le Fort/methods , Maxillary Fractures/surgery
4.
Dental press j. orthod. (Impr.) ; 25(2): e1-e9, Mar.-Apr. 2020. tab, graf
Article in English | LILACS, BBO | ID: biblio-1133655

ABSTRACT

ABSTRACT Introduction: Skeletal Class III malocclusion with asymmetry is one of the most difficult problems to correct in orthodontics. A functional shift of the mandible in growing patients may occur accompanying a Class III, due to constricted maxillary arch and occlusal interferences. Studies have indicated that posterior unilateral crossbite develops early and has a low rate of spontaneous correction. It may further lead to development of mandibular and facial asymmetry by growth and displacement of mandible if left untreated in growing patients. Objective: This article reports the clinical case of a thirteen-year-old female patient in CVMI transition stage that had maxillary hypoplasia with a developing facial asymmetry. Results: The case was successfully managed with bone-anchored facemask therapy and with elimination of occlusal interferences with guided occlusion. Reverse twin block in the retention phase maintained the results achieved. Conclusion: A four-year follow-up evaluation revealed successful maintenance of the treatment results.


RESUMO Introdução: A má oclusão de Classe III esquelética com assimetria é um dos problemas mais difíceis de se corrigir na Ortodontia. O desvio funcional da mandíbula em pacientes em fase de crescimento pode ocorrer acompanhado da Classe III, devido à atresia maxilar e interferências oclusais. Estudos têm indicado que a mordida cruzada posterior unilateral se desenvolve precocemente e apresenta baixo índice de correção espontânea. Isso pode levar ao desenvolvimento de assimetria mandibular e facial, resultante do crescimento e deslocamento da mandíbula, caso os pacientes não sejam tratados na fase de crescimento. Objetivo: O presente artigo relata o caso clínico de uma paciente com treze anos de idade, com IMVC em estágio de transição e que apresentava hipoplasia maxilar com assimetria facial em desenvolvimento. Resultados: O caso foi tratado com sucesso por meio de terapia com máscara facial osseossuportada, eliminando as interferências oclusais por meio de uma oclusão guiada. O uso do aparelho Twin-block reverso como contenção preservou os resultados atingidos. Conclusão: O acompanhamento após quatro anos confirmou a manutenção dos resultados do tratamento.


Subject(s)
Humans , Female , Adolescent , Facial Asymmetry , Malocclusion, Angle Class III , Cephalometry , Follow-Up Studies , Mandible , Maxilla
5.
Journal of Peking University(Health Sciences) ; (6): 550-554, 2016.
Article in Chinese | WPRIM | ID: wpr-493709

ABSTRACT

Objective:To evaluate the surgical corrective results of maxillary hypoplasia in patients with cleft lip and palate withtranspalatal modified Le Fort Ⅰ osteotomy.Methods:In the study,1 1 patients (4 women,and 7 men)with maxillary hypoplasia secondary to cleft lip and palate underwent transpalatal modified Le Fort Ⅰ osteotomy at Peking University School of Stomatology from Jan.201 2 to Dec.201 3, with the mean age of 21 years (from 1 8 to 27 years),Bilateral sagittal split ramus osteotomy (BSSRO) and genioplasty were performed simultaneously in 9 of them for better appearance and functional occlu-sion.Lateral cephalometric radiographs were taken and traced before surgery,immediately after surgery and 6 months after surgery.The position of subspinale (A)on horizontal direction,the angle of sella-na-sion-subsipmale (SNA)and the angle of sella-nasion-supramental (SNB)were collected and analyzed to evaluate the results.Results:All the patients were uneventful with transpalatal modified Le Fort Ⅰosteotomy.All of them had a better profile and a satisfactory occlusionafter operation.The position of A was moved forward (6.6 ±1 .1 )mm on average in horizontal direction when surgery was completed,and maintained (6.0 ±1 .2)mm on average 6 months after surgery.The average of SNA was 75.9°±2.8° before surgery,81 .6°±8.6°immediately after surgery,and maintained 81 .0°±2.6°6 months after sur-gery.The average of SNB was 82.6°±3.7°before surgery,78.0°±2.4°immediately after surgery,and maintained 78.5°±2.4°6 months after surgery.Conclusion:The maxillary hypoplasia in cleft lip and palate patients can be successfully corrected with transpalatal modified Le Fort Ⅰ osteotomy and the func-tional occlusion can be achieved simultaneously.The effect of deformity correction was satisfactory. Transpalatal modified Le Fort Ⅰ osteotomy can move maxilla more sufficiently,especially applicable for the patient with severe palatal scars preoperatively.

6.
Journal of Practical Stomatology ; (6): 845-849, 2009.
Article in Chinese | WPRIM | ID: wpr-405590

ABSTRACT

Objective: To evaluate the result of distraction osteogenesis in patients with pretnaxillary deficiency using a self-made tooth-borne distraction device. Methods: A self-made tooth-bome distraction device was used for advancement of the maxillary anterior segment in 28 patients. Results; 26 cases were corrected satisfactorily and have no any complications. In 2 cases the distraction device did not work during distraction. Conclusion: This device can improve the soft tissue profile and correct the space deficiency of the maxilla.

7.
Journal of the Korean Association of Maxillofacial Plastic and Reconstructive Surgeons ; : 92-99, 2008.
Article in Korean | WPRIM | ID: wpr-784793
8.
Journal of the Korean Association of Maxillofacial Plastic and Reconstructive Surgeons ; : 324-333, 2005.
Article in Korean | WPRIM | ID: wpr-784637
9.
Journal of the Korean Association of Maxillofacial Plastic and Reconstructive Surgeons ; : 657-663, 2000.
Article in Korean | WPRIM | ID: wpr-784291
SELECTION OF CITATIONS
SEARCH DETAIL