Relationship between the occlusal plane and three different levels of ala-tragus line in a sample of sudanese adults / Relación entre el plano oclusal y tres niveles diferentes de la línea ala-trago en una muestra de adultos sudaneses

Aim: Correct orientation of the occlusal plane plays a vital role in achieving the perfect occlusal balance and function of complete dentures. This study aimed to evaluate the most reliable posterior reference point of the ala-tragus line (ATL) concerning occlusal plane (OP) in a sample of the dentate Sudanese population. Materials and Methods: A total of 150 subjects with healthy and well-aligned permanent teeth were randomly selected. Right lateral profile photographs were taken with subjects having a fox plane placed intra-orally, contacting the occlusal plane. Reference points corresponding to inferior, middle, and superior borders of the tragus and inferior border of the ala of the nose were marked on photographs. The angles between the lines were measured using the Auto-CAD software program, and the most parallel relationship was determined. Descriptive statistics in terms of means and standard deviations were presented. Independent t-test and one-way ANOVA tests were used to compare as appropriate. A p-value < 0.05 was considered significant. Results: The mean angle formed by the OP and ATL was 8.5±3.69º for the superior level, 4.68±3.13º for the middle line, and 2.89±2.57º for the inferior line. A significant difference was found between the means of the three angles (p< 0.001), while no significant difference (p> 0.05) was found between both genders regarding the measured angles. Conclusions: The line joining the inferior border of the ala of the nose with the inferior border of the tragus of the ear was the most reliable line in terms of parallelism to determine the occlusal plane orientation.

Antecedentes: La orientación correcta del plano oclusal juega un papel vital para lograr el equilibrio oclusal perfecto y la función de las prótesis completas. Este estudio tuvo como objetivo evaluar el punto de referencia posterior más confiable de la línea ala-trago (ATL) con respecto al plano oclusal (OP) en una muestra de la población dentada de Sudán. Materiales y Métodos: Se seleccionaron aleatoriamente un total de 150 sujetos con dientes permanentes sanos y bien alineados. Se tomaron fotografías de perfil lateral derecho de sujetos a los que se les colocó un plano de zorro intraoralmente, en contacto con el plano oclusal. En las fotografías se marcaron los puntos de referencia correspondientes a los bordes inferior, medio y superior del trago y al borde inferior del ala de la nariz. Los ángulos entre las líneas se midieron utilizando el programa de software Auto-CAD y se determinó la relación más paralela. Se presentaron estadísticas descriptivas en términos de medias y desviaciones estándar. Se utilizaron prueba-t independiente y prueba ANOVA unidireccional para las comparaciones, según correspondiera. Se consideró significativo un valor de p<0,05. Resultados: El ángulo medio formado por OP y ATL fue de 8,5±3,69º para el nivel superior, 4,68±3,13º para la línea media y 2,89±2,57º para la línea inferior. Se encontró una diferencia significativa entre las medias de los tres ángulos (p< 0,001), mientras que no se encontró diferencia significativa (p>0,05) entre ambos sexos con respecto a los ángulos medidos. Conclusión: La línea que une el borde inferior del ala de la nariz con el borde inferior del trago de la oreja fue la línea más confiable en términos de paralelismo para determinar la orientación del plano oclusal.

Imaging study on the relationship between anterior and posterior occlusal planes and temporomandibular osteoarthrosis / 华西口腔医学杂志

OBJECTIVES@#The aim of this study was to compare the anterior and posterior occlusal plane characteristics of patients with different temporomandibular joint osseous statuses.@*METHODS@#A total of 306 patients with initial cone beam CT (CBCT) and cephalograms were included. They were divided into three groups on the basis of their temporomandibular joint osseous status: bilateral normal (BN) group, indeterminate for osteoarthrosis (I) group, and osteoarthrosis (OA) group. The anterior and posterior occlusal planes (AOP and POP) of the different groups were compared. Then, the regression equation was established after adjusting for confounding factors, and a correlation analysis between the occlusion planes and other parameters was performed.@*RESULTS@#SNA, SNB, FMA, SN-MP, Ar-Go, and S-Go were correlated with the occlusal planes. Relative to the BN and I groups, the FH-OP of the OA group increased by 1.67° on the average, FH-POP increased by 1.42° on the average, and FH-AOP increased by 2.05° on the average.@*CONCLUSIONS@#The occlusal planes were steeper in the patients with temporomandibular osteoarthrosis than in the patients without it, and the mandible rotated downward and backward. The height of the mandibular ramus, the mandibular body length, and the posterior face height were small. In clinical practice, attention should be given to the potential risk of temporomandibular joint osteoarthrosis in such patients. In addition, SNB, FMA, SN-MP, Ar-Go, S-Go, and occlusal planes had moderate correlations.

Implications of occlusal plane in diagnosis and treatment of malocclusion / 浙江大学学报·医学版

Occlusal plane (OP) is one of the essential factors affecting craniofacial morphology and function. The OP not only assists in diagnosing malocclusion but also serves as an important reference for making treatment plans. Patients with different types of malocclusions have different forms of OP. Compared with patients with standard skeletal facial type, the occlusal plane of patients with skeletal class Ⅱ and high angle is steeper, while that of patients with skeletal class Ⅲ and low angle is more even. In orthodontic treatment, adjusting and controlling the OP can promote the normal growth and development of the mandible in most patients with malocclusion during the early stage of growth, while causing favorable rotation of the mandible in some adults with mild-to-moderate malocclusion. For moderate-to-severe malocclusion, the OP rotation by orthodontic-orthognathic treatment can achieve better long-term stability. This article reviews the evolution of the definition of OP and its implications for diagnosing and the guiding treatment of malocclusion.

Cone-beam CT analysis of occlusal planes between different vertical skeletal types of adult class Ⅱ malocclusions in Shandong province / 解剖学报

[Abstract] Objective To investigate the cant of the occlusal planes in Chinese adult class Ⅱ malocclusions with hypodivergent, normodivergent, and hyperdivergent facial vertical patterns using cone-beam CT. Methods The descriptive, cross-sectional study evaluated 123 cephalogram from CBCT(CCB) of patients in Department of Orthodontics, the Affiliated Hospital of Qingdao University. According to cephalometric analysis, 89 Chinese adult class Ⅱ patients were divided into three groups according to the angle between FH-MP and the angle between SN-MP. In comparison, 34 Class I normodivergent malocclusions individuals were selected as the control group. Comparing the cephalometric result between 4 groups. Results As expected,the hyperdivergent group had steeper anterior occlusal planes(14. 73±3. 76) . and posterior occlusal planes(21. 42±5. 77)., there was a significant statistical difference between the hyperdivergent group and other 2 groups in class Ⅱ patients (P<0. 05). The height of maxillary second molar increased from high angle group to low angle group (P<0. 01). Conclusion There are different characters of the occlusal planes in varied vertical facial pattern. The inclinations of anterior and posterior occlusal planes in Chinese class Ⅱ hyperdivergent group were steeper than other 3 groups. The difference of posterior occlusal plane inclination is mainly caused by the height of maxillary second molar.

Clinical efficacy of counterclockwise rotating the functional occlusal plane using micro-implant anchorage / 浙江大学学报·医学版

To evaluate the therapeutic effect of using micro-implant anchorage (MIA) to rotate the functional occlusal plane (FOP) counterclockwise. Forty skeletal class Ⅱ high-angle patients who had completed orthodontic treatment were enrolled, including 20 patients treated with MIA orthodontic system (MIA group) and the other 20 patients treated with traditional sliding straight wire appliance (control group). Cephalometric measurements on the lateral cranial radiographs before and after treatment were performed, all acquired data were statistically analyzed with SPSS 26.0. At the end of treatment, MIA group obtained better effect of FOP and mandibular plane counter-clockwise rotation than the control group. In the MIA group, the average change of FOP-frankfort horizontal plane (FH), FOP-SN and mandibular plane angle (MP-FH) angle was -4.5(-7.3, -3.7)°, (3.3)° and -1.7(-3.0, -0.9)°, respectively. In the control group, the average change of FOP-FH, FOP-SN and MP-FH angle was -0.1(-4.1, 3.0)°, (-0.1±5.1)° and -0.4(-2.4, 0.7)°, respectively. There was significant difference between the change of the two groups (all <0.05). Compared with the traditional sliding straight wire appliance, counterclockwise rotation of FOP can be more effectively reversed by using MIA orthodontic system, and the MP-FH can be reduced as well.

Factores morfofuncionales de interés en prostodoncia que dependen de los biotipos craneofaciales / Morphofunctional factors of interest in prosthodontics depending on the craniofacial biotypes

El presente es un trabajo de investigación bibliográfica que busca establecer la posibilidad de utilizar las cefalometrías como elementos de diagnóstico pronóstico y elaboración de prótesis. Centra su objeto de estudio en encontrar y clasificar los factores morfológicos y funcionales que varían con los biotipos craneofaciales y que son de interés en la prostodoncia. La metodología empleada fue la revisión de la literatura histórica hasta la actualidad en la que se relacionan temas de prostodoncia a los biotipos craneofaciales. Si bien solo dos autores relacionaron la prostodoncia con los biotipos cráneo faciales, sí se encontraron varios temas de interés asociados directamente a la prostodoncia. Se clasificaron en temas de oclusión: Curva de Spee, plano de oclusión, movimientos mandibulares, dimensión vertical oclusiva y de especio libre interoclusal. Tema de maloclusiones. Tema de fuerza muscular. Tema variaciones morfológicas de procesos alveolares, corticales ósea y de la forma dentaría. Encontrándose para cada uno de ellos alguna correlación positiva con los distintos tipos faciales. De este estudio, se concluye que es necesario sistematizar el estudio de los conocimientos que puede aportar la cefalometría como una importante herramienta de diagnóstico al prostodoncista a partir de haberse encontrado variaciones muy importantes en los aspectos mencionados que hacen al interés de la rehabilitación prostodóncica (AU)

This Work is a bibliographic research that seeks to establish the use of cephalometries as elements of diagnosis prognostic and prosthesis elaboration. Its focus is to find and classify morphological and functional factors that vary with facial types which are of interest in prosthodontics. This was a review of the historical literature to date, in which prosthodontics are related to facial types. Although only two authors related prosthodontics to facial ypes, they did find several topics of interest directly associated with prosthodontics. They were classified into occlusion themes: Spee curve, occlusion plane, mandibular movements, occlusive vertical dimension and interocclusal free space. Malocclusion issue. Muscle strength theme. Morphological variations of alveolar processes, cortical bone and dental morphology. They found some positive correlation with the different facial types for each of them. From this study, it is concluded that it is necessary to systematize the study of cephalometries because they can provide to be an important diagnostic tool to the prosthodontist because there were found very important variations in the mentioned aspects that are of interest in prosthodontic rehabilitation (AU)

Influence of cranial base angle and posterior occlusal plane inclination on sagittal dentoskeletal types / 中国组织工程研究

BACKGROUND: Cranial base angle is related to the formation of sagittal dentoskeletal type, and the effect of occlusal plane or posterior occlusal plane on the formation of sagittal dentoskeletal type remains controversial. OBJECTIVE: To compare the importance of occlusal plane inclination and posterior occlusal plane inclination in determining the formation of sagittal dentoskeletal type, and to explore the combined influence of the cranial base angle and posterior occlusal plane inclination on the formation of sagittal dentoskeletal type, and its correlation. METHODS: The study was implemented in accordance with the ethical requirements of Hospital of Stomatology, Southwest Medical University. Patients and their guardians signed the informed consents. Totally 207 lateral cephalograms from patients (100 males and 107 females, aged 12-20 years) were selected. Dentoskeletal landmarks and subsequent measurements were performed and analyzed using Uceph software and SPSS 17.0 software, respectively. The samples were classified as three sagittal dentoskeletal types according to the anteroposterior dysplasia indicator (APDI) value: Class I, class II, and class III. The SNK and LSD methods were used for comparison among the three groups. The Pearson correlation coefficient analysis was used to analyze the correlation between skull base angle (NSBa angle), occlusion plane (FH-OP), posterior occlusion plane (FH-POP) and other related measurement indexes. Descriptive statistical methods were used to group occlusal plane inclination, posterior occlusal plane inclination and skull base angle, and the two-sample f-test was used to compare relevant bone and tooth indexes. Four dentoskeletal groups were established according to the posterior occlusion plane inclination and skull base angle: Small skull base angle-flat posterior occlusion plane group (S-F), small skull base angle-steep posterior occlusion plane group (S-S), large skull base angle-flat posterior occlusion plane group (L-F), large skull base angle-steep posterior occlusion plane group (L-S). Intergroup comparison was completed using crossover one-way analysis of variance. RESULTS AND CONCLUSION: The skull base angle was significantly smaller in the class III group than the class I and II group. Significantly higher posterior occlusion plane inclination was observed in the class II group than the class I and III groups. No differences were found in the APDI and ANB between occlusal plane groups. Significant differences in the ANB angle and APDI value were shown on the small skull base angle-flat posterior occlusal plane group and the large skull base angle-steep posterior occlusal plane group. These results indicate that among the factors affecting the formation of sagittal dentoskeletal type, the posterior occlusal plane is more representative than the occlusal plane. The curvature of the skull base and the inclination of the posterior occlusal plane affect the formation of sagittal dentoskeletal type. During the formation of sagittal dentoskeletal type, there may be some compensatory mechanisms between the curvature of the skull base and the posterior occlusal plane.

Análise bi e tridimensional das vias aéreas superiores em pacientes submetidos à cirurgia ortognática bimaxilar / Two- and three-dimensional analysis of the upper airways in patients undergoing bimaxillary orthognathic surgery

O propósito deste trabalho foi analisar as mudanças bi e tridimensionais na via área superior após procedimentos de cirurgia ortognática. Tomografias pré (T1) e pós-operatórias (T2) foram utilizadas, padronizando pontos craniométricos que serviram de referência para analisar mudanças lineares e volumétricas de diferentes áreas na via aérea superior. Vinte e dois pacientes foram incluídos no estudo, tendo sido submetidos a cirurgia bimaxilar com alteração do plano oclusal. Todos os casos foram planejados virtualmente, e o software Dolphin Imaging (versão 11.9) foi utilizado para análise das medidas lineares, bem como, o cálculo da área da via área superior total, e de suas 3 subdivisões e da região de maior constrição. A via aérea posterior e superior total, foi beneficiada com os movimentos de avanço das cirurgias bimaxilares. Houve correlação positiva entre o valor da constrição pré e pós e o valor total 3D da via aérea pré e pós. Observou-se diferença significativa quando se avalia a média Pré e Pós do seguimento de via aérea total (ST) bi e tridimensionalmente. Encontrou-se uma correlação positiva entre o giro anti-horário do plano oclusal e a ampliação da via aérea. Não foi possível determinar com precisão como cada ponto craniométrico individualmente influenciou e/ou contribui para as mudanças em cada segmento da via aérea analisada. Com bases nos dados da pesquisa a cirurgia ortognática bimaxilar demonstrou aumento das dimensões da via aérea superior, apresentando comportamentos diferentes a depender do segmento da via aérea superior avaliado, e da sua relação com os movimentos dos pontos craniométricos (AU).

The purpose of this work aimed to analyze the bi and three-dimensional changes in the upper airway after orthognathic surgery procedures. Pre (T1) and postoperative (T2) CT scans were used, standardizing craniometric points that served as a reference to analyze linear and volumetric changes in different areas in the upper airway. Twenty-two patients were included in the study, having undergone bimaxillary surgery with alteration of the occlusal plane. All cases were planned virtually, and the Dolphin Imaging software (version 11.9) was used to analyze the linear measurements, as well as the calculation of the area of the total upper area, and its 3 subdivisions and the region most significant. The posterior and upper total airways benefited from the advancing movements of bimaxillary surgeries. There was a positive correlation between the pre and post constriction value and the total 3D value of the pre and post airway. A significant difference was observed when evaluating the pre and post average of the total airway (ST) bi and three-dimensional follow-up. A positive correlation was found between the counterclockwise rotation of the occlusal plane airway's enlargement of the airway. It was not possible to accurately determine how each craniometric point individually influenced and / or contributed to the changes in each segment of the analyzed airway. Based on the research data, bimaxillary orthognathic surgery demonstrated an increase in the dimensions of the upper airway, showing different behaviors depending on the segment of the upper airway evaluated, and its relationship with the movements of the craniometric points (AU).

Buccolingual Inclination of Maxillary and Mandibular First Molars in Untreated Adults: A CBCT Study

Introduction: The general feature of occlusal curvature,when viewed from the front, consists of a buccal inclinationof the maxillary molars and a lingual inclination of themandibular molars. The fourth key of Andrews six keys ofocclusion is related to the curve of Wilson, describing theposterior inclination of the crowns of the lower posterior teethas a concave curve, setting the molars with a lingual torque.The aim of this study was to measure buccolingual inclinationof maxillary and mandibular first molars in untreated sampleof pre-orthodontic patients.Material and Methods: CBCT scans from 36 untreatedsubjects (26 females and 10 males; average age, 24.6 years) withminimal dental discrepancies, no prior history of orthodontictreatment, minimal dental wear, no posterior crossbite, nocrowns or significant restorations on any first molars, absenceof remaining primary dentition, were selected. The angleswere measured between long axis of each maxillary molar to avertical reference line that was perpendicular to the horizontalreference line and between each mandibular first molar to thesame reference line.Results: The average inclination of maxillary molar was+4.98º ± 4.26º. There was no significant difference betweenthe right and left mean values. The average inclinationof mandibular molar was -13.10º ± 6.10º. There was nosignificant difference between the right and left values.Conclusion: Maxillary and mandibular molars have a naturalcurvature of their inclinations where the maxillary molarshave a slight buccal inclination and mandibular molars have aslight lingual inclination

Clinical study on the posterior occlusal plane and morphology of temporomandibular joint / Estudio clínico sobre el plano oclusal posterior y la morfología de la articulación temporomandibular

The objective of the study was to investigate the morphological features of the temporomandibular joint in adult patients with posterior occlusal plane and different inclinations. Fifty five skeletal I occlusion patients with average were included, shooting CBCT in the intercuspal position, divided into 3 groups according to OPP-FH angle, and measurement of the temporomandibular joint morphology was calculated with cone beam computed tomography (CBCT) special software Invivo 5.0, Statistical analysis of three groups of data using SPSS23.0. The condyle usually locates in the middle of the fossa, the maximum axial area of the condyle (A) was statistically significant between the group 1 and the group 3. The internal and external diameter (MD) of the condyle was statistically significant between group 1 and group 3, and group 2 and group 3. The bilateral TMJ morphological features of the three groups were basically symmetrical. The position of the condyle in the fossa is mostly centered, and some of the posterior, the maximum axial area and the internal and external diameter of the condyle are different in three groups.

El objetivo de este estudio fue investigar las características morfológicas de la articulación temporomandibular (ATM) en pacientes adultos con plano oclusal posterior y diferentes inclinaciones. Se incluyeron 55 pacientes con oclusión esquelética tipo I, visualizados por tomografía computarizada de haz cónico (CBCT) en posición intercuspiana, y se dividieron en 3 grupos según el ángulo OPP-FH. La medición morfológica de la articulación temporomandibular se calculó con CBCT y mediante el software especial Invivo 5.0. El análisis estadístico de datos se realizó con el software SPSS 23.0. El cóndilo de la mandíbula generalmente se ubica en el centro de la fosa; el área axial máxima del cóndilo de la mandíbula (A) fue estadísticamente significativa entre los grupos 1 y 3. Los datos de los diámetros medial y lateral (DM) del cóndilo de la mandíbula fueron estadísticamente significativos entre los grupos 1 y 3 y los grupos 2 y 3. Las características morfológicas de la ATM de los tres grupos fueron básicamente simétricas. La posición del cóndilo de la mandíbula en la fosa fue principalmente centrada, y parte del área axial máxima, posterior y los diámetros medial y lateral del cóndilo de la mandíbula fueron diferentes en los tres grupos.

Comparação das medidas extraorais com as medidas intraorais na confecção da prótese total / Comparison of the extra-oral measurements with the intra-oral measurements in the manufacture of the total prosthesis

Introdução: o edentulismo é um problema bastante comum, e o conhecimento adequado da anatomia e da fisiologia da cavidade oral é essencial na recuperação e no equilíbrio neuromuscular do sistema estomatognático. O uso das linhas de referência juntamente com o plano oclusal orientam o posicionamento dos dentes artificias, que são utilizados para construção das próteses totais. Objetivo: comparar as medidas extraorais com as intraorais da largura dos dentes anteriores com as medidas das linhas de referências preconizadas na literatura para confecção de uma prótese total. Métodos: estudo do tipo observacional transversal, com amostra não probabilística, com 50 indivíduos de ambos os gêneros, no quais se realizou uma análise dentária e facial com auxílio de fotografias e um paquímetro digital. Resultados: foi observado que, na maioria dos indivíduos, não houve coincidência entre a largura dos dentes e as linhas de referência analisadas, que as mulheres apresentaram menor coincidência entre os dentes e a largura da asa do nariz, quando comparadas com os homens (8,3% e 91,7%, respectivamente), com p = 0,001. Conclusão: as linhas de referência não foram coincidentes com o tamanho dos dentes na maioria dos casos avaliados. (AU)

Introduction: edentulism is a fairly common problem, and adequate knowledge of the anatomy and physiology of the oral cavity is essential in the recovery and neuromuscular balance of the stomatognathic system. The use of reference lines together with the occlusal plane guide the positioning of the artificial teeth, which are used to construct the total dentures. Objective: to compare the extra-oral and intra-oral measurements of the width of the anterior teeth with the measurements of the reference lines recommended in the literature for making a total prosthesis. Methods: cross-sectional observational study with a non-probabilistic sample, with 50 individuals of both sexes, where a dental and facial analysis was carried out using photographs and a digital caliper. Results: it was observed that most of the individuals analyzed did not coincide between the width of the teeth and the reference lines, and that the analyzed women showed less coincidence between teeth and the width of the nose wing when compared with men (8.3% and 91.7%, respectively), with p = 0.001. Conclusion: the reference lines did not coincide with tooth size in most cases analysed. (AU)

Occlusal plane canting: a treatment alternative using skeletal anchorage

ABSTRACT A canted occlusal plane is the cause of unaesthetic smile, and also represents a challenge, due to the complex orthodontic procedures involved in its treatment. The skeletal anchorage allows successful treatment of this asymmetry in the majority of cases, with less dependency on the patient cooperation and reducing the necessity of orthognatic surgery. Given this condition, this article aims at discussing the main aspects related to the diagnosis of occlusal plane canting, treatment plan, and orthodontic mechanics using skeletal anchorage either by mini-implants or miniplates. In this context, five cases will be reported, showing the main details related to the orthodontic mechanics used to correct the occlusal plane, avoiding side effects and successfully reaching treatment objectives and long-term stability.

RESUMO O plano oclusal inclinado é causa de um sorriso esteticamente desagradável e representa um desafio, devido à complexidade dos procedimentos ortodônticos envolvidos no seu tratamento. A ancoragem esquelética permite a correção da inclinação do plano oclusal, na maior parte dos casos, sem a necessidade de cirurgia ortognática e com menor dependência da colaboração dos pacientes. Com base nisso, o objetivo desse artigo é discutir os principais aspectos relacionados ao diagnóstico, plano de tratamento e mecânica ortodôntica envolvida no tratamento do plano oclusal inclinado com mini-implantes ou miniplacas. Nesse contexto, cinco casos serão apresentados, demonstrando os principais detalhes relacionados à mecânica utilizada na correção do plano oclusal inclinado com a utilização de ancoragem esquelética.

Simultaneous distraction osteogenesis of the maxilla and mandible combined with second-stage orthognathic surgery for correction of hemifacial microsomia in adults / 口腔疾病防治

Objective @#To explore the clinical effect of simultaneous distraction osteogenesis of the maxilla and affected mandible combined with second-stage orthognathic surgery for the treatment of adult hemifacial microsomia to provide a reference for clinical practice.@*Methods@#Twelve adult patients with hemifacial microsomia who underwent simultaneous distraction osteogenesis and second-stage orthognathic surgery from 2006 to 2013 were enrolled. Distraction osteogenesis of the maxilla and malformed lateral mandible and second-stage orthognathic surgery were performed according to each patient’s specific conditions. The height ratio of the mandibular ramus of the affected side to the contralateral side, the shift distance of the chin point and the inclination angle of the screw plane were measured before and after the operation, and the therapeutic effect was evaluated with clinical photographs.@*Results @#No patients had obvious complications after the operation, the postoperative aesthetic effect was good, and the relationship between the facial shape and occlusion was significantly improved. The cephalometric measurement showed that the height ratio of the mandibular ramus of the affected side to the contralateral side was increased by 23.83% (t=11.658, P<0.001), the deviation distance of the chin was corrected, and the chin point moved back to the midline by 6.63 mm (t=13.042, P<0.001) on average, and the inclination angle of the occlusal plane was improved and returned to the horizontal plane by 8.83° (t=15.358, P<0.001) on average.@*Conclusion @#The application of simultaneous distraction osteogenesis of the maxilla and mandible combined with secondary orthognathic surgery for the treatment of adult hemifacial microsomia can obtain satisfactory clinical and aesthetic results and has clinical value.

Full-mouth rehabilitation in a patient with inclined occlusal plane and reduced vertical dimension by an attrition: A case report / 대한치과보철학회지

A proper vertical dimension and a harmonious occlusal plane are essential to satisfy a patient esthetically and functionally. A maxillomandibular occlusal vertical dimension is determined by the elevators which repeatedly contracts to a certain length, and a tooth location is determined by a maxillomandibular vertical dimension. The patient of this case came in with the incongruity of the lips and the occlusal plane. The result of clinical test showed the lack of length of the lower anterior due to the reduction of vertical dimension, the deep overbite of anterior, the excessive attrition of anterior, and the incongruity of occlusal plane. After the diagnostic wax-up, the temporary restoration was installed, and final prosthesis was installed after 6 months. As a result, the patient obtained a functionally and esthetically satisfying result.

Morphological characteristics of soft tissue profile of Angle's class II division i malocclusion before and after orthodontic treatment / Características morfológicas del perfil de tejido blando de la clase II de la división I de maloclusión de ángulo antes y después del tratamiento de ortodoncia

SUMMARY: By analysing cephalometrics before and after the treatment of Angle's class II division 1 malocclusion, soft tissue profile changes were observed, and to explore whether there was a correlation between the change of posterior occlusal plane (OP-P) and soft tissue profile. The study aimed to provide a theoretical reference in the clinical diagnosis and orthodontic treatment of early permanent dentition of Angle class II division 1 malocclusion patients. We randomly selected 20 cases of orthodontics in Shanxi Medical University orthodontics patients (aged 12-18 years) of the lateral cephalograms, Winceph 8.0 software was used to measure the posterior occlusal plane (OP-P), TUL-EP, TLL-EP, nasolabial angle, upper lip base thickness, upper lip tension, lower lip H line distance, chin soft tissue thickness and Z angle. And SPSS 22.0 software was used to analyze the correlation between OP-P and other measurement indexes. The change of posterior occlusal plane was positively related to the distance from upper lip to the esthetic plane, the distance from lower lip to the esthetic plane, the tension of the upper lip and distance from lower lip to H line, and the change of posterior occlusal plane was negatively related to nasolabial angle and Z angle. The change of posterior occlusal plane had no significant correlation with upper lip base thickness and soft tissue chin thickness. The change of posterior occlusal plane has an important guiding significance for orthodontic treatment,by focusing on the change of the posterior occlusal plane to achieve the purpose of changing the soft tissue profile.

RESUMEN: Se realizó un estudio cefalométrico antes y después del tratamiento de ortodoncia en pacientes portadores de maloclusión clase II división 1 de Angle. Se observaron cambios en el perfil de los tejidos blandos y se exploró si había una correlación entre el cambio del plano oclusal posterior (OP-P) y el perfil de los tejidos blandos. El objetivo de este estudio fue otorgar una referencia teórica en el diagnóstico clínico y el tratamiento de ortodoncia de los pacientes con dentición permanente temprana con maloclusión clase II división 1 de Angle. Seleccionamos al azar 20 casos cefalometrías de pacientes de ortodoncia de la Universidad Médica de Shanxi (entre 12 y18 años). Para ello, se utilizó el software Winceph 8.0 para medir el plano oclusal posterior (OP-P), TUL-EP, TLL-EP, ángulo nasolabial, grosor de la base del labio superior, tensión del labio superior, distancia entre líneas del labio inferior H, grosor del tejido blando del mentón y ángulo Z. Se utilizó el software SPSS 22.0 para analizar la correlación entre OP-P y otros índices. El cambio del plano oclusal posterior tuvo una correlación positiva con la distancia desde el labio superior al plano estético, la distancia desde el labio inferior hasta el plano estético, la tensión del labio superior y distancia del labio inferior a la línea H. El cambio del plano oclusal posterior tuvo una correlación negativa con el ángulo nasolabial y el ángulo Z. El cambio del plano oclusal posterior no tuvo una correlación significativa con el grosor de la base del labio superior y la barbilla de tejido blando. El cambio del plano oclusal posterior tiene un importante significado de orientación para el tratamiento de ortodoncia, de tal manera que al cambiar el plano oclusal posterior se podrá lograr el propósito de cambiar el perfil del tejido blando.

Design of points, lines and planes in the reconstruction of occlusion and the risk control in implantation / 中华口腔医学杂志

Occlusion reconstruction involves various factors, such as joints, muscles, teeth and mental states. The relationship between implantation complications and occlusion, especially in the method of reducing the risk of implantation during occlusal reconstruction, is more and more emphasized by clinicians. This article mainly summarized the essentials of occlusal factors, such as mandibular position, cusp inclination and occlusal contacts, Spee's curve, Wilson curve and occlusal plane, in clinical treatment from the perspective of static geometry, dynamic functional movement in points, lines and planes, in order to accomplish precise occlusion reconstruction to achieve a stable and functional occlusion reconstruction, i.e. comfortable mandibular position, reasonable protrusive and lateral guidance, firm retrusive control and stable posterior supports, and to maintain the stability of implant.

Re-establishment of occlusal plane in a patient with a failed implant prosthesis / 대한치과보철학회지

A non-physiological occlusal plane caused by continuous tooth loss, occlusal wear, and failure of a prosthesis may result in an unattractive appearance and functional problems, such as reduced masticatory efficiency and occlusal interference. Therefore, when undertaking prosthetic treatment for edentulous patients or patients with a collapsed occlusal plane, it is important to establish an occlusal plane that is compatible with masticatory function. The patient in this case report had undergone restoration of a completely edentulous maxilla using an implant-supported fixed prosthesis. On follow-up examination in the following 6 years, mechanical complications were observed in the existing implant prosthesis, including porcelain chipping, occlusal wear, and screw loosening. Moreover, due to occlusal wear and supraeruption of the opposing anterior teeth, as well as loss of some posterior teeth, the occlusal plane had collapsed. Following diagnosis, the patient underwent full mouth rehabilitation, involving additional implant installation in edentulous sites, recreation of the existing prosthesis, and prosthetic restoration of all remaining teeth.

Oral rehabilitation that transit from optimized provisional through continuous re-evaluation to definitive prosthesis using CAD/CAM system: A case report / 대한치과보철학회지

Prosthetic decision-making is complex because of various factors, and involves a combination of the individual dentist's interpretation of the objective clinical data and his or her interaction with the patient. Increasing therapeutic options and emerging outcome data demand the constant re-evaluation of our decision-making process. In this case, fixed prosthetic restorations were selected as a treatment method to reconstruct the occlusal plane of a patient with disharmonious occlusal plane. And the occlusal plane was re-established by establishing a treatment plan through diagnostic wax-up. Provisional restorations obtained by continuous re-evaluation for a sufficient period of time was replicated to definitive restorations using CAD/CAM technology. The results were satisfactory when they were observed through clinical follow-up for 3 months after the end of treatment.

A new method to orthodontically correct dental occlusal plane canting: wave-shaped arch / 北京大学学报(医学版)

Objective:To introduce a technique of second order wave-shaped arch wire to orthodontically treat dental occlusal plane canting (DOPC) with left-right interactive anchorage,and to test its clinical efficacy.Methods:Among the permanent dentition malocclusion patients who showed no obvious facial asymmetry,we screened for patients who showed anterior occlusal plane canting (AOPC) after routine orthodontic examination,treatment planning,MBT fixed appliance installation and serial arch wires alignment.Each patient had been clinically appraised in frontal view by 2 orthodontists and the patient him/herself;if all 3 agreed that the AOPC was obvious,the patient was included.By this means,we ineluded 37 patients,including 10 males and 27 females;the average age was (21.9 ± 5.2) years.To correct AOPC,opposite direction equal curvature second order rocking-chair curve was bent on each side of 0.46 mm × 0.56 mm stainless steel edgewise wire.With reference to normal occlusal plane,a curve toward the occlusal surface was made to extrude under-erupted teeth on one side while a curve toward the gingiva was made to intrude over-erupted teeth on the other side,so that the arch wire was made into a wave shape in vertical dimension.Before and after application of wave-shaped arch wire,frontal facial photographs were taken when the patient's mouth was open slightly with lips retracted to show anterior occlusal plane (AOP) clearly.An AOP was constructed by connecting the center of the slot in the medial edge of canine bracket on each side in the photograph.The angles between the bipupillary plane (BPP)and the constructed AOP were measured in ImageJ1.48v software and the angle differences before and af ter treatment were compared with paired Wilcoxon test in SPSS 10.0 software.Results:The wave-shaped arch could correct AOPC effectively in 3 to 10 months time with an average of 5.5 ± 1.7 months;the angles between AOP and BBP before treatment ranged from 2.90° to 6.12° with a median of 4.01°;after treatment the angles were from-0.17° to 2.57° with a median of 1.87°,the decrease of the angles between AOP and BBP after treatment ranged from 1.08° to 4.15° with a median of 2.21 Paired Wilcoxon test P was 0.000.Conclusion:The wave-shaped arch can be used independently or in combination with other treatment methods,which can take advantage of left and right interactive anchorage to correct AOPC effectively,so it has certain application value in clinical practice.

Control of the maxillary occlusal plane by micro-implant in the process of en-mass retraction:A finite element analysis / 实用口腔医学杂志

Objective:To investigate the changes of occlusal plane in the process of retracting maxillary anterior teeth with different vertical traction force.Methods:The three dimensional finite element model of maxillary anterior teeth en-masse retraction by micro-implant was constructed with cone beam CT scanning and MIMICS and ANSYS software.Then the movement tendency of tooth and the changes of the maxillary occlusal plane was calculated when the vertical traction force was 0,0.5,0.75 and 1 N in the process of en-mass retraction,respectively.Results:Lingual tipping of anterior teeth,distal tipping of the first molar and the maxillary occlusal plane clockwise rotation by the retraction forces were observed.With the vertical traction force increasing,lingual tipping of anterior teeth and distal tipping of the first molar were decreased,and the occlusal plane clockwise rotation was prevented.Conclusion:The upper dentition movement and occlusal plane rotation can be changed effectively by the vertical traction with different force.When retract anterior teeth,0.5-0.75 N vertical traction force is beneficial to prevent clockwise rotation of the maxillary occlusal plane.