Influence of different opacities and layering technique of nanotechnology composite resins regarding the wavelength and fluorescence intensity: in vitro study / Influencia de diferentes opacidades y la técnica de estratificación de resinas compuestas de nanotecnología en la longitud de onda e intensidad de fluorescencia: estudio in vitro

Objective: To evaluate the influence of opacity and the layering technique on the fluorescence of different composite resins. Materials and Methods: Two opacities (enamel and dentin) and the layering technique (enamel + dentin) of the composite resins: Filtek® Z350 and Palfique LX5 were evaluated in vitro. Composite resin discs were fabricated using a preformed matrix of 10 mm diameter and 0.5 mm thick for the single opacity groups and 10 mm thick for the layering technique groups, using 2 layers of 0.5 mm thickness of each opacity (n = 5). Specimens were analyzed using the Raman spectroscopy method. Data were analyzed using the Kruskall-wallis and Mann-Whitney U tests. Results: When evaluating the intensity of fluorescence, no statistically significant difference was found when comparing the layering technique and enamel opacity (p2> 0.05) and an increase in the dentin opacity value for both brands of composite resin. Regarding wavelength, no statistically significant difference was found when comparing the layering technique with enamel opacity and dentin opacity for both Filtek® Z350 and Palfique LX5® composite resins (p2 > 0.05). Conclusions: The fluorescence intensity of the layering technique is similar to enamel opacity for both composite resins. Likewise, the wavelength of the layering technique is similar to the enamel opacity and dentin opacity for both brands.

Objetive: Evaluar la influencia de la opacidad y de la técnica de estratificación en la fluorescencia de diferentes resinas compuestas. Materiales y Métodos: Se evaluó in vitro 2 opacidades (Esmalte y Dentina) y la técnica de estratificación (Esmalte + Dentina) de las resinas compuestas: Filtek® Z350 y Palfique LX5. Se fabricaron discos de resina compuesta, utilizando una matriz preformada de 10 mm de diámetro y 0,5 mm de grosor para los grupos de opacidad única y 10 mm de grosor para los grupos de técnica estratificada, utilizando 2 capas de 0,5 mm de cada opacidad (n = 5). Los especímenes se analizaron mediante el método de Espectroscopía Raman. Los datos se analizaron utilizando la prueba de Kruskall-wallis y Prueba U de Mann Whitney. Resultado: Al evaluar la intensidad de fluorescencia no se encontró diferencia estadísticamente significativa entre los pares: Técnica estratificada versus Opacidad Esmalte para ambas marcas de resina compuesta Filtek® Z350 y para Palfique LX5® (p2 > 0,05). Para longitud de onda no se encontró diferencia estadísticamente significativa entre los pares: Técnica estratificada versus Opacidad Esmalte y Técnica estratificada VS Opacidad Dentina para ambas resinas compuesta Filtek® Z350 y Palfique LX5® (p2> 0,05). Conclusión: La intensidad de fluorescencia de la técnica estratificada es similar a la opacidad Esmalte para ambas resinas compuestas. De igual manera la longitud de onda de la técnica estratificada es similar a la opacidad Esmalte y opacidad Dentina para ambas marcas.

Research and application of Surface-enhanced Raman scattering technique in biomedical detection / 中华检验医学杂志

The application of Raman spectroscopy in the field of laboratory medicine is making continuous progress and development. The biosensor platform based on Raman spectroscopy provides a new means for accurate molecular diagnosis of diseases. In particular, as a fast and non-destructive detection method, surface-enhanced Raman scattering has the advantages of simple sample preparation, little interference from water and real-time detection, and shows great application potential in the field of medical examination. At the same time, with the integration of SERS and other technologies, including electrochemistry, new nano-materials, microfluidic, biochip, DNA nano-machine, artificial intelligence and machine learning, it will play a more and more important role in the field of medical laboratory. With the deepening of SERS research and the cross-integration between multiple disciplines, it will be widely used in biomedical detection and is expected to become an important technology platform for the next generation of precision diagnosis.

Detection of Haptoglobin by Surface-Enhanced Raman Scattering Based on the Shift of Characteristic Peak / 分析化学

Acute cerebral infarction(ACI)has the characteristics of onset nasty and high mortality,and thus the rapid determination of the occurrence and development of ACI plays a key role in the diagnosis,treatment and prognosis of ACI patients.It has shown that the serum level of human haptoglobin(Hp)is related to ACI.In this study,surface enhanced Raman scattering(SERS)combined with immune recognition was applied to establish a quantitative analysis method for serum Hp.Firstly,the SERS substrate of silver nanoparticles was prepared on silicon wafer,and 4-mercaptobenzoic Acid(MBA)was used as a Raman probe by forming Ag—S bond and connecting it on the surface of nanoparticles.The carboxyl group of MBA was linked to amino group of self-made high-affinity antibody through forming CO—NH structure thus forming a SERS self-assembled chip of Hp(Ag/MBA/anti-Hp).Hp in serum could be specifically captured by antibodies on SERS substrate,which caused the shift of SERS characteristic peak of MBA.The results showed that there was a good linear relationship between the logarithm of Hp concentration and the SERS characteristic peak shift of MBA.The detection range was 1-1000 ng/mL(R2=0.988).The Hp concentrations in serum of 90 ACI patients were determined by this method,and the results were consistent with those of ELISA method,which proved the practicability and accuracy of this method.This method was highly specific,simple and convenient,which could realize the specific recognition and quantitative analysis of serum Hp,so as to be an effective means for clinical detection of serum Hp,thus providing a reference for the treatment and prognosis of ACI.

Analysis of Cumulative Live Birth Rate of Selective Single Embryo Transfer by Time-lapse Monitoring System and Conventional Morphological Assessment in IVF/ICSI-ET / 实用妇产科杂志

Objective:To analyse the clinical significance of selective single embryo transfer by time-lapse mo-nitoring(TLM)or conventional morphology assessment(CMA)in vitro fertilization/intracytoplasmic sperm in-jection and embryo transfer(IVF/ICSI-ET),and to initially explore the predictive value of Raman spectral analy-sis of embryo culture medium for clinical pregnancy rate.Methods:The study is a prospective randomized con-trolled clinical trial.We assigned 139 patients treated with IVF/ICSI-ET in Reproductive and Genetics Center of Suzhou Municipal Hospital from April 2019 to July 2020,which were randomly assigned to either the CMA or the TLM group.We performed selective single-embryo transfer(fresh cycle and FET)after selecting the optimal em-bryos with TLM or CMA respectively.If the patient's first embryo transfer was unsuccessful,a second one would be performed to compare the differences in the cumulative live birth rate of embryo transfer and other pregnancy outcomes between the two groups.Meanwhile,we collected 15 μl of embryo culture medium at day 3 after IVF/ISCI fertilization for Raman spectroscopy analysis.Results:There were no differences in cumulative live birth,cu-mulative clinical pregnancy,cumulative premature birth,cumulative early spontaneous abortion,cumulative ectopic pregnancy and LGA or SGA between TLM and CMA groups(P＞0.05).The Neonatal sex ratio in the TLM group was lower than that in the CMA group,but the difference was not significant(P＞0.05).Raman spectros-copy analysis of embryo culture medium predicted the clinical pregnancy rate with 67.21％accuracy.Conclu-sions:In young women with a good ovarian reserve,the advantage of using TLM to evaluate embryos is not obvi-ous,so we should remain vigilant that embryo selection based on morphokinetic parameters may affect the sex ratio.Raman spectroscopic analysis of embryo culture medium is not yet able to effectively predict the planting ability of embryos.

Raman Spectroscopy Analysis of The Temporal Heterogeneity in Lung Cell Carcinogenesis Induced by Benzo(a)pyrene / 生物化学与生物物理进展

ObjectiveTemporal heterogeneity in lung cancer presents as fluctuations in the biological characteristics, genomic mutations, proliferation rates, and chemotherapeutic responses of tumor cells over time, posing a significant barrier to effective treatment. The complexity of this temporal variance, coupled with the spatial diversity of lung cancer, presents formidable challenges for research. This article will pave the way for new avenues in lung cancer research, aiding in a deeper understanding of the temporal heterogeneity of lung cancer, thereby enhancing the cure rate for lung cancer. MethodsRaman spectroscopy emerges as a powerful tool for real-time surveillance of biomolecular composition changes in lung cancer at the cellular scale, thus shedding light on the disease’s temporal heterogeneity. In our investigation, we harnessed Raman spectroscopic microscopy alongside multivariate statistical analysis to scrutinize the biomolecular alterations in human lung epithelial cells across various timeframes after benzo(a)pyrene exposure. ResultsOur findings indicated a temporal reduction in nucleic acids, lipids, proteins, and carotenoids, coinciding with a rise in glucose concentration. These patterns suggest that benzo(a)pyrene induces structural damage to the genetic material, accelerates lipid peroxidation, disrupts protein metabolism, curtails carotenoid production, and alters glucose metabolic pathways. Employing Raman spectroscopy enabled us to monitor the biomolecular dynamics within lung cancer cells in a real-time, non-invasive, and non-destructive manner, facilitating the elucidation of pivotal molecular features. ConclusionThis research enhances the comprehension of lung cancer progression and supports the development of personalized therapeutic approaches, which may improve the clinical outcomes for patients.

Effects of plateau environment on tear indexes and related anatomical structures of rabbits / 国际眼科杂志(Guoji Yanke Zazhi)

AIM: To investigate the effects of hypobaric hypoxia in plateau on tear indexes and related anatomical structures in rabbits.METHODS: A total of 18 healthy New Zealand rabbits were selected and randomly divided into plateau group and control group, with 9 rabbits(18 eyes)in each group. The plateau group was housed in the Simulated Climate Cabin for Special Environment of Northwest of China, simulating hypobaric hypoxia at an altitude of 6 000 m. The control group was housed in a clean animal room with atmospheric pressure and oxygen. Changes in the tear meniscus height and non-invasive tear break-up time were detected by using RHCT-1 corneal topographer dry eye comprehensive analysis system, changes in tear secretion was measured by Schirmer Ⅰ test, before intervention and on the 3, 7 d, 2 and 4 wk. Meanwhile, the changes in tear composition before and after intervention in the plateau environment were analyzed using Raman Spectroscopy. The histopathological changes of the lower lid conjunctiva, cornea, lacrimal gland, and Hardarian gland were observed by hematoxylin-eosin(HE)staining after 4 wk of intervention, and the expression of mucin 5AC(MUC5AC)in conjunctiva was detected by immunohistochemistry.RESULTS: Compared with the control group, Schirmer Ⅰ test, tear meniscus height, first and average non-invasive tear break-up time in the plateau group decreased significantly since 3 d, and the difference was significant with the extension of observation time(P<0.05). The above indexes increased from 2 wk. After 4 wk of intervention, the protein and lipid content of the tear composition of rabbits in the plateau group increased, and the nucleic acid content decreased compared with the pre-intervention period. Compared with the control group, rabbits in the plateau group showed thickening of corneal stromal edema, an increase in the number of conjunctival cup cells, increase in the level of expression of MUC5AC, an increase in the level of expression of MUC5AC, an atrophy and flattening of cytoplasm in lacrimal epithelial cells, an enlargement of glandular lumen, and no obvious destructive changes in the Hardarian glands.CONCLUSION: Acute plateau environment can destroy the homeostasis of rabbit ocular surface, so that the tear secretion and the tear film stability decreases, but within a certain period of time, rabbits undergo compensation with the habituation to the hypobaric hypoxia environment, which can increase the tear secretion to a certain extent and restore the tear film stability.

Effect of hydrofluoric acid concentration and aging on the bond strength ceramics to a resin cement

Abstract This study evaluated the influence of hydrofluoric acid (HF) concentration and thermal cycling on the microshear bond strength (µSBS) of a resin luting agent to IPS e.max® CAD and Rosetta® SM. Ceramic specimens (12.0 x 14.0 x 1.5mm) were randomized into 8 groups (n=10) according to HF concentration, commercial brand, and aging. Immediately after polishing, and etching, all specimens were silanized and a layer of adhesive was applied. A PVS mold of 3 mm thickness and 10mm diameter with (four) 1.0mm holes was fabricated, placed on each specimen, and then filled with a resin luting agent. Half of the specimens were subjected to the µSBS test using an Instron at a speed of 1.0 mm/min, following a 24-hour storage in deionized water at 37ºC. The remaining specimens were subjected to thermal cycling (5ºC-55ºC, 30 seconds per bath) and µSBS. The data were evaluated utilizing a three-way ANOVA and Tukey's post-hoc test (α=0.05). Significant differences were found for HF concentration and aging (p<0.0001). No significant difference in µSBS was found for commercial brands (p=0.085). The interaction between brand and HF concentration (p=0.358), brand and aging (p=0.135), and HF concentration and aging (p=0.138) were not statistically significant. The triple interaction among these factors was not statistically significant (p=0.610). In conclusion, the bond strength is affected by the HF concentration. No statistical difference was observed between the two ceramics. Thermal cycling significantly reduced µSBS.

Resumo Este estudo avaliou a influência da concentração do ácido fluorídrico (AF) e da ciclagem térmica na resistência de união ao microcisalhamento (RUµC) de um cimento resinoso para IPS e.max® CAD e Rosetta® SM. Espécimes cerâmicos (12,0 x 14,0 x 1,5mm) foram divididos em 8 grupos (n=10) de acordo com concentração do HF, marca comercial e envelhecimento. Imediatamente após o polimento e condicionamento ácido, todos os espécimes foram silanizados e uma camada de adesivo foi aplicada. Um molde PVS de 3 mm de espessura e 10 mm de diâmetro com (quatro) orifícios de 1,0 mm foi confeccionado, colocado em cada espécime e preenchido com o cimento resinoso. Metade dos espécimes foi submetida ao teste RUµC na Instron a velocidade de 1,0 mm/min, após 24 horas de armazenamento em água deionizada a 37ºC. Os espécimes restantes foram submetidos a ciclagem térmica (5ºC-55ºC, 30 segundos por banho) e a RUµC. Os dados foram avaliados por ANOVA de três fatores e ao teste post-hoc de Tukey (α=0,05). Diferenças significativas foram encontradas para concentração de HF e envelhecimento (p<0,0001). Nenhuma diferença significativa na RUµC foi encontrada para cada marca comercial (p=0,085). A interação entre marca comercial e a concentração do HF (p=0,358), marca comercial e envelhecimento (p=0,135) e concentração do HF e envelhecimento (p=0,138) não foram estatisticamente significativas. A tripla interação entre esses fatores não foi estatisticamente significativa (p=0,610). Concluindo, a resistência de união é afetada pela concentração de HF. Não foi observada diferença estatística entre as duas cerâmicas. A ciclagem térmica reduziu significativamente a resistência de união ao microcisalhamento.

Cytotoxic effects on human dental pulp stem Cells after exposure to adhesive bonding agents

Abstract Studies regarding cytotoxic effects attributed to the use of adhesive bonding agents on pulp tissue are not conclusive. To point out whether these materials are safe for clinical use, in vivo exposure of dental pulp to adhesive bonding agents was simulated using an experimental setup in which Human Dental Pulp Stem Cells (hDPSC) are exposed to the action of two kinds of adhesives: self-etching adhesives and two-step bonding agents through a dentine barrier. Cytotoxic effects on these cells were evaluated by MTT assay protocol and fluorescence microscopy, and their results were contrasted to those obtained through Raman spectra taken on single hDPSCs. Overall, no significant cytotoxic effects were observed by combining all the techniques, and cell viability close to 90% was achieved for a dentine barrier of at least 1 mm thick. Moreover, Raman spectroscopy was able to detect structural DNA damage in some dental pulp cells when exposed to two-step bonding agents, suggesting that this technique could be considered a complementary tool with the potential to evaluate cell toxicity beyond cell viability.

Resumo Os estudos sobre os efeitos citotóxicos atribuídos ao uso de agentes de união adesivo no tecido pulpar não são conclusivos. Para determinar se esses materiais são seguros para uso clínico, a exposição in vivo da polpa dentária a agentes de união adesiva foi simulada por meio de uma configuração experimental na qual as células-tronco da polpa dentária humana (hDPSC) são expostas à ação de dois tipos de adesivos: adesivos autocondicionantes e agentes de união de duas etapas por meio de uma barreira de dentina. Os efeitos citotóxicos nessas células foram avaliados pelo protocolo de ensaio MTT e microscopia de fluorescência, e seus resultados foram contrastados com os obtidos por meio de espectros Raman obtidos em hDPSCs individuais. De modo geral, não foram observados efeitos citotóxicos significativos com a combinação de todas as técnicas, e a viabilidade celular próxima a 90% foi obtida para uma barreira de dentina de pelo menos 1 mm de espessura. Além disso, a espectroscopia Raman foi capaz de detectar danos estruturais ao DNA em algumas células da polpa dentária quando expostas a agentes de colagem de duas etapas, sugerindo que essa técnica poderia ser considerada uma ferramenta complementar com potencial para avaliar a toxicidade celular além da viabilidade celular.

Comparison of biofilm models for producing artificial active white spot lesions

Abstract Creating artificial caries-like lesions that mimic the complex changes observed in natural caries is essential for properly evaluating new strategies, dental materials, and devices designed to arrest their progression and avoid more costly and invasive treatments. Objective This study compared three protocols for developing artificial white spot lesions (WSL) using biofilm models. Methodology In total, 45 human enamel specimens were sterilized and allocated into three groups based on the biofilm model: Streptococcus sobrinus and Lactobacillus casei (Ss+Lc), Streptococcus sobrinus (Ss), or Streptococcus mutans (Sm). Specimens were incubated in filter-sterilized human saliva to form the acquired pellicle and then subjected to the biofilm challenge consisting of three days of incubation with bacteria (for demineralization) and one day of remineralization, which was performed once for Ss+Lc (four days total), four times for Ss (16 days total), and three times for Sm (12 days total). After WSL creation, the lesion fluorescence, depth, and chemical composition were assessed using Quantitative Light-induced Fluorescence (QLF), Polarized Light Microscopy (PLM), and Raman Spectroscopy, respectively. Statistical analysis consisted of two-way ANOVA followed by Tukey's post hoc test (α=0.05). WSL created using the Ss+Lc protocol presented statistically significant higher fluorescence loss (ΔF) and integrated fluorescence (ΔQ) in comparison to the other two protocols (p<0.001). Results In addition, Ss+Lc resulted in significantly deeper WSL (137.5 µm), followed by Ss (84.1 µm) and Sm (54.9 µm) (p<0.001). While high mineral content was observed in sound enamel surrounding the WSL, lesions created with the Ss+Lc protocol showed the highest demineralization level and changes in the mineral content among the three protocols. Conclusion The biofilm model using S. sobrinus and L. casei for four days was the most appropriate and simplified protocol for developing artificial active WSL with lower fluorescence, higher demineralization, and greater depth.

Analysis of the distribution of microhardness, mineral, and organic content of human, bovine, and ovine teeth / Análisis de la distribución de microdureza, contenido mineral y orgánico de dientes humanos, bovinos y ovinos

Objetive. Human teeth have been commonly used for in vitro and in situ studies. Cu­rrently, other animals' teeth have been purposed for dental research to overcome human teeth' problematic availability. This study aimed to investigate the enamel and dentin from human, bovine, and ovine teeth concerning the microhardness, organic, and in­ organic contents via micro­Raman spectroscopy. Methods. Human, bovine, and ovine teeth were divided according to their type and age into seven groups: Ovine; Bovine­12 months; Bovine­24 months; Bovine­36 months; Bovine­48 months; Bovine­+60 months; Human (control). The enamel's microhardness (superficial and deep) and den­tin (superficial, middle, and deep) were analyzed. The calcium/phosphate ratio and am­ide contents were determined by micro­Raman spectroscopy. Results. Overall, the mi­crohardness of human enamel was superior to the other species. Dentin's microhardness was similar among groups. Ovine group showed lower values of calcium/phosphate ratio than human. Amide content was similar between bovine and human. The microhardness and calcium/phosphate ratio of enamel and dentin, respectively, decreased as the age of bovine teeth increased. Conclusions. Researchers must be aware and take into consider­ation the differences of ovine and bovine enamel compared to human enamel. Other al­ternatives that are more similar to the microhardness of human enamel should be sought. Bovine teeth of 12 and 24 months are suitable substitutes for dentin of human teeth. Researchers must also be aware of the age of the animals and specify it in the studies.

Objetivo. Los dientes humanos se han utilizado comúnmente para estudios in vitro e in situ. Actualmente, los dientes de otros animales se han destinado a la investiga­ción dental para superar la disponibilidad problemática de los dientes humanos. Este estudio tuvo como objetivo investigar el esmalte y la dentina de los dientes humanos, bovinos y ovinos en relación con la microdureza y los contenidos orgánicos e inor­gánicos a través de la espectroscopia micro­Raman. Métodos. Los dientes humanos, bovinos y ovinos se dividieron según su tipo y edad en siete grupos: Ovinos; Bovino­12 meses; Bovino­24 meses; Bovino­36 meses; Bovino­48 meses; Bovino­+60 meses; Hu­mano (control). Se analizó la microdureza del esmalte (superficial y profunda) y de la dentina (superficial, media y profunda). La relación calcio/fosfato y los contenidos de amida se determinaron mediante espectroscopía micro­Raman. Resultados. En general, la microdureza del esmalte humano fue superior a la de otras especies. La microdureza de la dentina fue similar entre los grupos. El grupo ovino mostró valores más bajos de la relación calcio/fosfato que el humano. El contenido de amida fue similar entre bovinos y humanos. La microdureza y la relación calcio/fosfato del esmalte y la dentina, respectiva­mente, disminuyeron a medida que aumentaba la edad de los dientes bovinos. Conclusiones. El esmalte de los dientes ovinos y bovinos no es un sustituto adecuado del de los dientes humanos. Se deben buscar otras alternativas que sean similares a la microdureza del esmalte humano. Sin embargo, los dientes bovinos de 12 y 24 meses son sustitutos adecuados de la dentina de los dientes humanos. Los investigadores deben conocer la edad de los animales y especificarla en los estudios.

Effect of experimental bleaching gels with polymers Natrosol and Aristoflex on the enamel surface properties

Abstract Natrosol and Aristoflex® AVC polymers are widely applied in the cosmetic industry and have recently been applied as a thickener option in the composition of dental bleaching gels, with the purpose to reduce the adverse effects on enamel mineral components. The aim of this study was to evaluate the color variation (ΔE* ab, ΔE00, ∆WID), surface roughness (Ra), and mineral content quantification (Raman Spectroscopy) of dental enamel after bleaching treatment with experimental gel-based on 10% carbamide peroxide (CP), containing Carbopol, Natrosol, and Aristoflex® AVC. Sixty bovine teeth were randomly divided into 6 groups (n=10): Negative Control (NC) - no treatment; Positive Control (PC) - Whiteness Perfect 10% - FGM; CP with Carbopol (CPc); CP with Natrosol (CPn); CP with Aristoflex® AVC (CPa); NCP - no thickener. Data were analyzed, and generalized linear models (∆WID -T0 x T1) were used for repeated measurements in time for Ra and with a study factor for ΔE* ab and ΔE00. For the evaluation of the mineral content, data were submitted to one-way ANOVA and Tukey tests. For enamel topographic surface analysis the Scanning Electron Microscope (SEM) was performed. A significance level of 5% was considered. ΔE* ab and ΔE00 were significantly higher for CPc, CPn, CPa, and NCP groups. (∆WID) showed a significantly lower mean than the other groups for NC in T1. After bleaching (4-hour daily application for 14 days), Ra was higher in the CPc, CPn, and PC groups. For CPa, Ra was not altered. No significant difference was found in the quantification of mineral content. CPa preserved the surface smoothness more effectively. Aristoflex® AVC is a viable option for application as a thickener in dental bleaching gels, presenting satisfactory performance, and maintaining the whitening efficacy of the gel, with the advantage of preserving the surface roughness of tooth enamel without significant loss of mineral content.

Resumo Os polímeros Natrosol e Aristoflex® AVC são amplamente utilizados na indústria cosmética e foram recentemente aplicados como uma opção de espessante na composição de géis de clareamento dental, com o objetivo de reduzir os efeitos adversos sobre os componentes minerais do esmalte. O objetivo deste estudo foi avaliar a variação de cor (ΔE*ab, ΔE00, ∆WID), rugosidade da superfície (Ra), e quantificação do conteúdo mineral (Raman Spectroscopy) do esmalte dentário após clareamento dental com gel experimental baseado em 10% de peróxido de carbamida (CP), contendo Carbopol, Natrosol e Aristoflex® AVC. Sessenta dentes bovinos foram divididos aleatoriamente em 6 grupos (n=10): Controle Negativo (CN) - sem tratamento; Controle Positivo (CP) - Brancura Perfeita 10% - FGM; CP com Carbopol (CPc); CP com Natrosol (CPn); CP com Aristoflex® AVC (CPa); NCP - sem espessante. Os dados foram analisados e modelos lineares generalizados (∆WID -T0 x T1) foram usados para medições repetidas no tempo para Ra e com um fator de estudo para ΔE*ab e ΔE00. Para a avaliação do conteúdo mineral, os dados foram submetidos a testes unidirecionais de ANOVA e Tukey. Para a análise da superfície topográfica do esmalte, o Microscópio Eletrônico de Varredura (SEM) foi realizado. Um nível de significância de 5% foi considerado. ΔE*ab e ΔE00 foram significativamente maiores para os grupos CPc, CPn, CPa e NCP. (∆WID) mostrou uma média significativamente menor do que os outros grupos para NC em T1. Após o clareamento (aplicação diária de 4 horas por 14 dias), Ra foi maior nos grupos CPc, CPn e PC. Para CPa, Ra não foi alterado. Nenhuma diferença significativa foi encontrada na quantificação do conteúdo mineral. O CPa preservou a suavidade da superfície de forma mais eficaz. Aristoflex® AVC é uma opção viável para aplicação como espessante em géis de clareamento dental, apresentando desempenho satisfatório e mantendo a eficácia clareadora do gel, com a vantagem de preservar a rugosidade da superfície do esmalte dentário sem perda significativa de conteúdo mineral.

Application of microfluidic technology based on surface-enhanced Raman scattering in cancer biomarker detection:A review / 药物分析学报

With the continuous discovery and research of predictive cancer-related biomarkers,liquid biopsy shows great potential in cancer diagnosis.Surface-enhanced Raman scattering(SERS)and microfluidic tech-nology have received much attention among the various cancer biomarker detection methods.The former has ultrahigh detection sensitivity and can provide a unique fingerprint.In contrast,the latter has the characteristics of miniaturization and integration,which can realize accurate control of the detection samples and high-throughput detection through design.Both have the potential for point-of-care testing(POCT),and their combination(lab-on-a-chip SERS(LoC-SERS))shows good compatibility.In this paper,the basic situation of circulating proteins,circulating tumor cells,exosomes,circulating tumor DNA(ctDNA),and microRNA(miRNA)in the diagnosis of various cancers is reviewed,and the detection research of these biomarkers by the LoC-SERS platform in recent years is described in detail.At the same time,the challenges and future development of the platform are discussed at the end of the review.Summarizing the current technology is expected to provide a reference for scholars engaged in related work and interested in this field.

Distinguishing subgingival plaques of patients with chronic periodontitis and type 2 diabetes mellitus based on Raman spectroscopy / 中国医科大学学报

Objective The aim of this study is to combine Raman spectroscopy and machine learning techniques to distinguish subgin-gival plaques among three groups of subjects,including patients with chronic periodontitis(CP)and type 2 diabetes mellitus(T2DM),patients with CP alone,and healthy controls.Methods The Raman spectra of the subgingival plaques from 20 patients with CP and T2DM(group A),23 patients with CP alone(group B),and 23 healthy controls(group C)were obtained using a portable Raman spec-trometer.Eight common machine learning algorithms were applied to build models to distinguish the Raman spectra of the three types of subgingival plaques.Results The model identified as optimal for distinguishing the three types of subgingival plaques was linear discri-minant analysis(LDA).The optimal model to distinguish groups A and B is LDA,groups A and C is extra trees(ET),and groups B and C group is LDA.Conclusion The proposed classification model based on Raman spectroscopy and machine learning algorithms can dis-tinguish subgingival plaques among patients with CP and T2DM,with CP alone,and healthy controls.This technique can be used in future clinical practice as a screening or diagnostic tool.

Advances in the diagnosis of bladder cancer based on Raman spectroscopy / 中华泌尿外科杂志

Bladder cancer is one of the common tumors of urinary system. Early detection and treatment can reduce the recurrence rate and mortality. Currently, it is difficult to balance the diagnostic specificity and sensitivity of traditional diagnostic methods. However, Raman spectroscopy, as a molecular diagnostic technology, can reveal the difference between normal urinary tract epithelial tissue and urinary tract epithelial cell carcinoma of the bladder at the molecular level, which has the characteristics of faster and more accurate diagnosis compared with traditional diagnostic techniques. This paper reviews the research progress of Raman spectroscopy in the diagnosis of bladder cancer.

Identification of Quantized Characterization of Liver Meridian Based on Raman Spectrum of Chinese Medicinal Materials / 世界科学技术-中医药现代化

Objective Based on the comparison and analysis of Raman spectra of liver meridian(including other meridian)and non-liver meridian(other meridian excluding liver meridian)traditional Chinese medicine,the accurate quantitative characterization data of liver meridian was obtained,and the liver meridian identification model was established and analyzed.Methods Taking 120 non-liver meridian(other meridian excluding liver meridian)traditional Chinese medicines(TCMs)as blank control and 120 liver-meridian(including other meridian)TCMs as experimental medicines,Raman spectra of 240 TCMs were obtained after sample pretreatment and Raman spectroscopy detection,and then quantified in units of 1 cm-1.Then combined with Random Forest(Random Forest,RF),Artificial Neural Network(Artificial Neural Network,ANN)and other algorithms,we constructed the identification models of quantized characterization of liver meridian.Results Compared with non-liver meridian(other meridian excluding liver meridian)TCMs,the Raman spectra of the liver meridian TCM were generally lower in the whole detection range,especially in the range of 200-1100 cm-1.The quantized Raman spectrogram data combined with ANN presented the best discrimination results with accuracy,precision>0.871,the receiver operating characteristic curve(ROC)was drawn and the area under ROC curve(AUC)was obtained,with AUC>0.921.Conclusion The Raman spectrogram of TCMs has significant correlation with liver meridian,which can be used as a whole quantized characterization of liver meridian.Combined with ANN,Raman spectrogram can carry out identification analysis efficiently and accurately,which is conducive to solving the bottleneck problem of lacking accurate data on medicinal properties and enriching the scientific connotation of attributing meridians.

Research and application of Raman spectroscopy in the diagnosis and therapy of brain glioma / 中华核医学与分子影像杂志

Brain glioma invariably relapses since the tumor is difficult to remove completely. Accurate identification of tumor subtypes and tracing of tumor boundaries intraoperatively are the key clinical issues. Raman spectroscopy has a good application prospect in the intraoperative diagnosis of brain glioma due to its advantages of nondestructive, label-free, histology imaging and high specificity. In this article, the research and application of Raman spectroscopy in the in vitro diagnosis and intraoperative navigation-related diagnosis and treatment of brain glioma are reviewed.

3D Raman mapping as an analytical tool for investigating the coatings of coated drug particles / 药物分析学报

The properties of dry-coated paracetamol particles(fast-dissolving model drug)with carnauba wax particles as the coating agent(dissolution retardant)were investigated.Raman mapping technique was used to non-destructively examine the thickness and homogeneity of coated particles.The results showed that the wax existed in two forms on the surface of the paracetamol particles,forming a porous coating layer:i)whole wax particles on the surface of paracetamol and glued together with other wax surface particles,and ii)deformed wax particles spread on the surface.Regardless of the final particle size fraction(between 100 and 800 μm),the coating thickness had high variability,with average thickness of 5.9±4.2 μm.The ability of carnauba wax to decrease the dissolution rate of paracetamol was confirmed by dissolution of powder and tablet formulations.The dissolution was slower for larger coated particles.Tableting further reduced the dissolution rate,clearly indicating the impact of subsequent formulation processes on the final quality of the product.

Real-time SERS monitoring anticancer drug release along with SERS/MR imaging for pH-sensitive chemo-phototherapy

In situ and real-time monitoring of responsive drug release is critical for the assessment of pharmacodynamics in chemotherapy. In this study, a novel pH-responsive nanosystem is proposed for real-time monitoring of drug release and chemo-phototherapy by surface-enhanced Raman spectroscopy (SERS). The Fe3O4@Au@Ag nanoparticles (NPs) deposited graphene oxide (GO) nanocomposites with a high SERS activity and stability are synthesized and labeled with a Raman reporter 4-mercaptophenylboronic acid (4-MPBA) to form SERS probes (GO-Fe3O4@Au@Ag-MPBA). Furthermore, doxorubicin (DOX) is attached to SERS probes through a pH-responsive linker boronic ester (GO-Fe3O4@Au@Ag-MPBA-DOX), accompanying the 4-MPBA signal change in SERS. After the entry into tumor, the breakage of boronic ester in the acidic environment gives rise to the release of DOX and the recovery of 4-MPBA SERS signal. Thus, the DOX dynamic release can be monitored by the real-time changes of 4-MPBA SERS spectra. Additionally, the strong T2 magnetic resonance (MR) signal and NIR photothermal transduction efficiency of the nanocomposites make it available for MR imaging and photothermal therapy (PTT). Altogether, this GO-Fe3O4@Au@Ag-MPBA-DOX can simultaneously fulfill the synergistic combination of cancer cell targeting, pH-sensitive drug release, SERS-traceable detection and MR imaging, endowing it great potential for SERS/MR imaging-guided efficient chemo-phototherapy on cancer treatment.

Raman Spectroscopy of six explanted acrylic hydrophobic foldable intraocular lenses with glistening

Purpose: To study and interpret Raman spectra of six explanted acrylic hydrophobic foldable intraocular lenses (HFIOLs) with grade six microvacuoles and to understand the possible mechanism for microvacuole formation. Methods: Clinical data, slit-lamp photographs, and optical microphotographs of the explanted analytes were obtained. RS of the analytes were registered using a confocal Raman microscope (Lab RAM HR Evolution, Horiba Jobin Yvon) and Horiba Lab Space 6 Spectroscopy Suite software. Data were interpreted by identifying the functional group and fingerprint region of the spectra about the available literature. Results: IOLs were explanted for visual impairment after an average interval of 11.2 years following implantation. Each of the HFIOLs exhibited distinctive and identical Raman bands at the frequency range of 200–1,800, 2,600–3,000, and 3,200–3,700 cm?1 which were identified with those reported in the literature. The unique bands and peaks of the spectra were specific to the functional groups, its ring and other stretching variations, hydroxyl group, and water molecule. A spike at 1,640 cm?1 revealed the presence of monomer and indicated material bioincompatibility of the samples. Conclusion: Raman spectroscopy (RS) was found specific and an effective tool to detect the material change in the HFIOL and constituents of polymer biomaterial about microvacuole formation and also suggested modification and development of a more biocompatible and non-biodegradable polymer blend where RS could be a monitoring tool.

Analysis of changes in neoadjuvant chemotherapy for breast cancer based on Raman spectroscopy / 中华内分泌外科杂志

Objective:To explore the relationship between the changes of serum components in breast cancer after neoadjuvant chemotherapy and the efficacy of chemotherapy based on Raman spectroscopy.Methods:Raman spectra of serum samples from 110 breast cancer patients who received neoadjuvant chemotherapy and 15 healthy subjects admitted to the Department of Breast and Thyroid Surgery of the Affiliated Tumor Hospital of Xinjiang Medical University from Feb. 2013 to Jan. 2020 were detected, and PCA-LDA method was combined to predict the efficacy of neoadjuvant chemotherapy.Results:Raman spectra of breast cancer patients after neoadjuvant chemotherapy were similar to those of normal breast, with carotenoid peaks (1513 cm -1, 1518 cm -1) . Raman spectra combined with PCA-LDA showed high sensitivity and specificity (80.0%, 71.4%) in evaluating the efficacy of neoadjuvant chemotherapy for breast cancer. Conclusion:Raman spectroscopy combined with multivariate data analysis can be used as a new method to evaluate the efficacy of neoadjuvant chemotherapy for breast cancer and a new strategy to guide subsequent treatment regiments.