ABSTRACT
Aim: To assess the distance between the inferior alveolar canal and the roots of the mandibular second molar and the mandibula and cortex in a Saudi Arabian subpopulation through existing CBCT images. Materials and Methods: This retrospective study was performed based on 120 patients CBCT images in five age groups.The distances (D1 and D2) between the buccal cortex (BC), lingual cortex (LC), and mandibular molars and the distances (D3) between the root apices and inferior alveolar nerve canal (IANC) were measured for each dental root on the right and left of the mandible with the help of Vision iCAT software. A radiology specialist with a gap of 15 days twice carried out the measurements. Statistical analysis was carried out with the help of SPSS 24. to analyse variability Chi-square analysis was done, and the p value was fixed at > 0.05. To check inter-person variability, Cohen's variability was fixed at 0.8. Results: The distance between the outer surface of the buccal cortical plate and the buccal root surface ranged between 3.8 and 5.7 mm, whereas the distance between the root apices of the mandibular molars and the IANC ranged between 4.8 and 3.5 mm. The distance from the outer surface of the lingual cortical plate to the lingual root surface varied between 1.2 and 2.8 mm. The mean distance between the root apices and IANC increased with age, more so in males than females. Conclusions: Even though this study was conducted on a small sample size, it will help the dental practitioners in planning endodontic procedures, surgical extractions, and implant placements, and it should be repeated with a higher number of images.
Objetivo: Evaluar la distancia entre el canal alveolar inferior y las raíces del segundo molar mandibular, y la mandíbula y la corteza en una subpoblación de Arabia Saudita a través de imágenes CBCT existentes.Materiales y Métodos: Este estudio retrospectivo se realizó con base en imágenes CBCT de 120 pacientes en cinco grupos de edad. Las distancias (D1 y D2) entre la corteza bucal (BC), la corteza lingual (LC) y los molares mandibulares y las distancias (D3) entre los Se midieron los ápices radiculares y el canal del nervio alveolar inferior (IANC) para cada raíz dental a la derecha e izquierda de la mandíbula con la ayuda del software Vision iCAT. Un especialista en radiología, con un intervalo de 15 días, realizó dos veces las mediciones. El análisis estadístico se realizó con la ayuda del SPSS 24. Para analizar la variabilidad se realizó un análisis de Chi-cuadrado y el valor p se fijó en > 0,05. Para comprobar la variabilidad entre personas, la variabilidad de Cohen se fijó en 0,8. Resultados: La distancia entre la superficie exterior de la placa cortical bucal y la superficie de la raíz bucal osciló entre 3,8 y 5,7 mm, mientras que la distancia entre los ápices radiculares de los molares mandibulares y el IANC osciló entre 4,8 y 3,5 mm. La distancia desde la superficie exterior de la placa cortical lingual hasta la superficie de la raíz lingual varió entre 1,2 y 2,8 mm. La distancia media entre los ápices de las raíces y la IANC aumentó con la edad, más en hombres que en mujeres. Conclusión: Aunque este estudio se realizó con un tamaño de muestra pequeño, ayudará a los odontólogos a planificar procedimientos de endodoncia, extracciones quirúrgicas y colocación de implantes, y debe realizarse con más números.
Subject(s)
Humans , Male , Female , Adult , Middle Aged , Young Adult , Tooth Root/anatomy & histology , Alveolar Process/anatomy & histology , Mandible/anatomy & histology , Molar/anatomy & histology , Saudi Arabia , Tooth Root/diagnostic imaging , Epidemiology, Descriptive , Cone-Beam Computed Tomography , Alveolar Process/diagnostic imaging , Mandible/diagnostic imaging , Mandibular Nerve , Molar/diagnostic imagingABSTRACT
OBJECTIVES@#This study aimed to investigate the feasibility of measuring the soft tissue height of bone cristae around implant by digital method.@*METHODS@#A total of 36 patients with dental implants were selected from the Dental Medicine Center of the First Affiliated Hospital of University of Science and Technology of China (Anhui Provincial Hospital) from August 2022 to December 2022. A total of 43 dental implants were enrolled. All postoperative cone beam CT (CBCT) imaging data and intraoral digital impressions obtained before surgery were immediately obtained by the patients on the day of completion of oral implant surgery and they were imported into oral implant surgery planning software for image fitting. Then, virtual implants of the same specification were placed in the planting area, and the implant position was adjusted to overlap with the implant shadow in the CBCT image. Supracrestal tissue height (STH) was measured at the implant view interface (digital group). During the operation, implant holes were prepared step by step in accordance with the standard preparation method, and implants were implanted. The upper edge of the implant was flushed with the crest of the alveolar ridge. STH was measured by perio-dontal probing (periodontal probe group). Paired t-test was used to compare the STH differences between the digital and periodontal probe groups. Bland-Altman test was used to analyze the consistency of the two methods. Intra-group correlation coefficient (ICC) was used to verify the reliability of the results measured by different surveyors using di-gital methods.@*RESULTS@#No statistical significance was observed in the STH difference between the two methods (P>0.05). Bland-Altman test showed good consistency between the two methods, but the measurement of mandibular posterior teeth showed that the results of periodontal probe were greater than those of digital method. The ICC and 95%CI of the STH results measured digitally by different surveyors are 0.992 (0.986-0.996).@*CONCLUSIONS@#The digital me-thod is in good agreement with the periodontal probe method in measuring the soft tissue height of the bone cristae around the implant.
Subject(s)
Humans , Alveolar Process/diagnostic imaging , Cone-Beam Computed Tomography/methods , Dental Implants , Feasibility Studies , Reproducibility of Results , Tooth/diagnostic imagingABSTRACT
Evaluation of ridge alteration after 1 year follow up after immediate loading implant placement. Methods: Ten patients were included in the study, in whom the ridge volume, height, and thickness were evaluated from region of interest (ROI) of tomographic images of the operated areas (test group) and compared to the opposite tooth (control group). Results: After one year, there was no implant loss and all patients were satisfied with the treatment. In the test group there was a statistically significant increase in ridge height (2.89±1.05 mm) when compared to the control group. No significant difference in relation to ridge volume and thickness was observed. In the intragroup evaluation, a significant gain in ridge height (2.65±3.08 mm) was observed when compared to baseline. Conclusion: The placement of an immediate implant, temporary crown, and tissue regeneration in sockets with buccal defects promotes the regeneration of the buccal wall while preventing the reduction of bone volume and thickness
Subject(s)
Humans , Male , Female , Regeneration , Dental Implants , Alveolar Process , HeterograftsABSTRACT
Objective: To determine the impact of CBCT on diagnostic evaluation and treatment plan for the maxillary sinus in dental implant planning. Material and Methods: Diagnostic evaluation and treatment plan for the maxillary sinus were evaluated by eight specialists experienced in dental implant placement. Eight panoramic radiographs (PAN) and CBCT examinations were obtained from five adult patients with a specific clinical need for dental implants. Evaluation was performed first on PAN then, at least 2 weeks later, on CBCT. Residual alveolar ridge height, mucosal thickening, radiographic findings and treatment plan were recorded. The confidence level was evaluated for both diagnostic evaluation and treatment plan. The kappa statistic for intra-observer reproducibility and McNemar test were performed. Results: In the diagnostic evaluation, CBCT showed significant impact on the diagnosis of radiographic findings. Availability of CBCT significantly changed the treatment plan, for less invasive treatment, or no treatment need. Observers had significantly greater confidence when using CBCT than PAN, when indicating presence of mucosal thickening and radiographic findings in the maxillary sinus. In addition, CBCT increased confidence in the treatment plan. Conclusion: The present study suggests that CBCT has an impact on the diagnostic evaluation of radiographic findings in the maxillary sinus and on the decision to place implants, owing to misdiagnosis of pathology and planning of more invasive treatments when using PAN. Availability of CBCT also improves clinician confidence. Further studies at higher levels of diagnostic efficacy should be performed, to justify the use of CBCT, by evaluating the actual treatment performed and its outcome.
Objetivo: Determinar el impacto de la tomografía computarizada de haz cónico (CBCT) en la evaluación diagnóstica y el plan de tratamiento del seno maxilar en la planificación de implantes dentales. Material y Métodos: La evaluación diagnóstica y el plan de tratamiento del seno maxilar fueron evaluados por ocho especialistas con experiencia en la colocación de implantes dentales. Se obtuvieron ocho radiografías panorámicas (PAN) y exámenes CBCT de cinco pacientes adultos con una necesidad clínica específica de implantes dentales. La evaluación se realizó primero en PAN y luego, al menos dos semanas después, en CBCT. Se registraron la altura del reborde alveolar residual, el engrosamiento de la mucosa, los hallazgos radiográficos y el plan de tratamiento. Se evaluó el nivel de confianza tanto para la evaluación diagnóstica como para el plan de tratamiento. Se realizó el estadístico kappa para la reproducibilidad intraobservador y la prueba de McNemar. Resultados: En la evaluación diagnóstica, CBCT mostró un impacto significativo en el diagnóstico de los hallazgos radiográficos. La disponibilidad de CBCT cambió significativamente el plan de tratamiento, para un tratamiento menos invasivo o sin necesidad de tratamiento. Los observadores tuvieron una confianza significativamente mayor al usar CBCT que PAN, al indicar la presencia de engrosamiento de la mucosa y hallazgos radiográficos en el seno maxilar. Además, CBCT aumentó la confianza en el plan de tratamiento. Conclusión: El presente estudio sugiere que la CBCT tiene un impacto en la evaluación diagnóstica de los hallazgos radiográficos en el seno maxilar y en la decisión de colocar implantes, debido al diagnóstico erróneo de la patología y la planificación de tratamientos más invasivos al usar PAN. La disponibilidad de CBCT también mejora la confianza del clínico. Se deben realizar más estudios a niveles más altos de eficacia diagnóstica para justificar el uso de CBCT, evaluando el tratamiento real realizado y su resultado.
Subject(s)
Humans , Dental Implants , Cone-Beam Computed Tomography/methods , Maxillary Sinus/diagnostic imaging , Peru/epidemiology , Diagnostic Imaging/instrumentation , Planning , Alveolar ProcessABSTRACT
Introduction: There are multiple techniques for vertical bone augmentation. Guided bone regeneration is one of them; however, the literature is diverse and includes different study designs, which makes it difficult to synthesize results. Objective: To analyze the general technical characteristics, clinical results, and complications of vertical bone augmentation performed with guided bone regeneration in humans. Material and Methods: This scoping review was based on the PRISMA-ScR guidelines. A search was performed in the Pubmed, Scielo, and Worldcat databases. Papers published from 1990 to April 2020 were included in the study. Research articles not conducted in humans or published in languages other than English and Spanish were excluded. Title and abstract were screened by two reviewers, then full studies were extracted, and data tabulated. Results: 89 studies were included. The highest percentage reported having obtained a vertical bone increase of less than 5 mm and having used non-resorbable membranes. The most frequent type of graft is autogenous and combinations of grafts, the most common being autogenous with xenograft. All studies that reported bone stability of implants in regenerated bone were favorable, as was implant survival, reporting values between 83.8% and 100%. Membrane exposure is the most frequently reported complication, followed by infection or abscesses, and tissue dehiscence. Conclusion: Vertical bone regeneration is a reliable technique, with high predictability and low incidence of complications compared to other vertical bone augmentation techniques.
Introducción: Existen múltiples técnicas para el aumento óseo vertical siendo una opción la regeneración ósea guiada, sin embargo, la literatura es diversa y con distintos diseños que dificultan la síntesis de resultados. Objetivo: Analizar las características generales técnicas, resultados clínicos y complicaciones del aumento óseo vertical realizado con regeneración ósea guiada en humanos. Material y Métodos: Esta revisión de alcance se basó en la guía PRISMA-ScR. Se realizó una búsqueda en las bases de datos Pubmed, Scielo y Worldcat. Fueron incluidos aquellos publicados desde el año 1990 hasta abril de 2020. Se excluyeron los estudios no realizados en humanos o publicados en idiomas distintos al inglés y español. Dos revisores examinaron título y resumen, luego los estudios completos se extrajeron y se ordenaron los datos en tablas. Resultados: 89 estudios fueron incluidos. El mayor porcentaje reportó haber obtenido un aumento óseo vertical menor a 5 mm y haber utilizado membranas no reabsorbibles. El tipo de injerto que más frecuente es el autógeno y las combinaciones de injertos, siendo el más común autógeno con xenoinjerto. Todos los estudios que reportaron estabilidad ósea de implantes en hueso regenerado fueron favorables, al igual que la supervivencia de implantes, reportando valores entre 83,8% y 100%. La exposición de membrana es la complicación que más se repite en los estudios, seguido por infección o abscesos y dehiscencia de tejidos. Conclusión: La regeneración ósea vertical es una técnica confiable, con alta predictibilidad y baja incidencia de complicaciones en comparación a otras técnicas de aumento óseo vertical.
Subject(s)
Humans , Bone Regeneration , Dental Implants , Guided Tissue Regeneration, Periodontal , Alveolar Ridge Augmentation/methods , Alveolar Bone Loss , Transplants , Alveolar ProcessABSTRACT
SUMMARY: The posterior superior alveolar artery (PSAA) and the infra-orbital artery (IOA) present intraosseous and extraosseous rami which form an anastomosis in the lateral wall of the maxillary sinus. This anastomosis is always present, however it has not yet been included in anatomical terminology (AT), and different terms are used in scientific communication to refer to it. The aim of this study was to carry out a review of the different terms used to name this vascular structure. A literature review was carried out on the terms used to name the anastomosis between the PSAA and IOA in imaging studies and human cadavers that assessed the presence/frequency of this anatomical structure. The search was carried out in the Medline, EMBASE and LILACS databases, in Portuguese, Spanish and English, with no date restrictions. Qualitative analysis was applied to the studies selected, analysing the terminology used to refer to the anastomosis between the PSAA and IOA. Of the 2108 original articles found, 60 were selected as potentially relevant and 54 studies were finally included for qualitative analysis. Sixteen terms were found to refer to the anastomosis between the PSAA and IOA, the most frequent being Posterior Superior Alveolar Artery (PSAA), followed by Alveolar Antral Artery (AAA). Many terms are used in the medical literature to designate the anastomosis between the PSAA and IOA, the most frequent being PSAA and AAA. There is a need to unify the terms used to designate this vascular structure, and to incorporate the selected term into anatomical terminology, in order to avoid confusion in scientific communication.
RESUMEN: La arteria alveolar superior posterior (AASP) y la arteria infra-orbital (AIO) tienen ramas intra y extra óseas que forman una anastomosis en la pared lateral del seno maxilar. Esta anastomosis está siempre presente, sin embargo, aún no ha sido incluida en la terminología anatómica (TA), por lo que en la comunicación científica se utilizan diferentes términos para referirse a ella. El objetivo de este estudio fue realizar una revisión sobre los diferentes términos utilizados para nombrar esta estructura vascular. Se realizó una revisión de la literatura sobre los términos utilizados para nombrar la anastomosis entre AASP y AIO en estudios imagenológicos y en cadáveres humanos que evaluaron la presencia/frecuencia de esta estructura anatómica. La búsqueda fue realizada en las bases de datosMedline, EMBASE y LILACS, en los idiomas portugués, español e inglés, sin restricción de fecha. Los estudios seleccionados fueron evaluados de forma cualitativa, analizando la terminología empleada para referirse a la anastomosis entre AASP y AIO. Fueron encontrados 2108 artículos originales, siendo seleccionados 60 artículos potencialmente relevantes y finalmente fueron incluidos 54 estudios para análisis cualitativo. Fueron encontrados 16 términos para referirse a la anastomosis entre AASP y AIO, siendo AASP el más frecuente seguido de arteria alveolo-antral (AAA). Son muchos los términos utilizados en la literatura médica para designar la anastomosis entre AASP y AIO, siendo AASP y AAA los más usados. La unificación de los términos utilizados para designar esta estructura vascular y su incorporación en la Terminología Anatómica contribuiría a evitar equívocos en la comunicación científica.
Subject(s)
Humans , Orbit/blood supply , Arteries/diagnostic imaging , Alveolar Process/blood supply , Maxillary Sinus/diagnostic imaging , Arteriovenous Anastomosis , Cadaver , Cone-Beam Computed Tomography , Terminology as TopicABSTRACT
A colocação de implantes osseointegráveis requer volume ósseo adequado, porém, a extração de dentes leva a diferentes padrões de remodelaç ão e reabsorção óssea. A reabsorção do rebordo alveolar tem sido considerada uma consequência inevitável da extração dentária e pode ser um problema significativo em Implantodontia. Após a extração dentária, mesmo com a instalação de implantes imediatos, o sítio desdentado do processo alveolar sofre substancial modelagem óssea, com a diminuiç ão das dimensões da crista alveolar. Após a inserção de um implante em um local de extração fresco, um defeito marginal (GAP) ocorre, frequentemente, entre o rebordo e a superfície do implante, A fim de superar esse problema e para facilitar a formaç ão de osso no defeito marginal, vários processos de enxerto têm sido utilizados, associados ou não ao uso de membranas de barreira, bem como diversos tipos de substitutos ósseos que podem ser utilizados para tal procedimento. Esse trabalho tem por objetivo revisar e discutir a literatura relacionada ao uso de biomateriais sintéticos para preenchimento desses defeitos que se formam ao redor de implantes instalados em alvéolos frescos. No entanto, ainda não existe um biomaterial ideal que possua todas as pro- priedades desejáveis. Além disso, o volume de osso residual deve ser avaliado antes da extração de dentes, de modo que os cirurgiões possam utilizar técnicas diferentes para preservar o osso alveolar.
Subject(s)
Tooth Extraction , Biocompatible Materials , Bone Resorption , Alveolar ProcessABSTRACT
Some mycoses are endemic. They develop through hematogenous spread, causing a generalized infection, usually with secondary mucosal involvement.The aim of this observational and retrospective study was to report the prevalence and characteristics of oral lesions in patients diagnosed with systemic fungal infections (SFI) over a 25-year period in southern Brazil. Demographic (age, sex, ethnicity, occupation) and clinical (anatomical location, symptoms,histopathological diagnosis and management) data from the medical records of patients with SFI were collected from 1995 to 2019. 34 cases of SFI were found, of which 31 (91.18%) were diagnosed as paracoccidioidomycosis (PCM) and 3 (8.82%) as histoplasmosis. Men were much more affected (n = 31; 91.18%), with an average age of 46.9 years. Most patients (n = 18; 58.06%) were Caucasian; 48% (n = 15) were farm/rural workers and the most affected region was the jugal mucosa (n = 13; 25.49%) followed by the alveolar ridge (n = 12; 23.52%). All patients with histoplasmosis were immunocompetent men (mean age: 52.67 years), and the palate was the most affected. All patients underwent incisional biopsy and were referred to an infectologist. The dentist has an essential role in the recognition of SFI, whose oral manifestations may be the first sign. SFI should be included in differential diagnosis in patients from endemic areas. In addition, the inevitable human mobility and globalization make knowledge of these mycosesnecessary worldwide, especially since advanced cases in immunocompromised patients can be fatal.
Subject(s)
Humans , Male , Female , Adult , Middle Aged , Aged , Oral Manifestations , Endemic Diseases/prevention & control , Mycoses , Palate/pathology , Paracoccidioidomycosis/pathology , Tongue/pathology , Medical Records/statistics & numerical data , Retrospective Studies , Dentists/education , Alveolar Process/pathology , Health Services Research/statistics & numerical data , Histoplasmosis/pathology , Mucous Membrane/pathologyABSTRACT
Objective: it is important to know the thicknesses of the alveolar bone plates (ABPs) based on the current literature for the planning and success of orthodontic treatment. However, studies have scientific limitations regarding ABPs as the image resolution is not adequate and is restricted to a few teeth or buccal face only. This study was aimed at reporting a reference standard for bone plates of upper teeth, in which 15 patients (mean age of 21.79 years) with balanced occlusion and a harmonious facial profile were evaluated using cone-beam computed tomography at a voxel size of 0.1 mm. Material and Methods: bone tissues of the cervical, middle, and apical thirds of the root (buccal and palatal), the distance between cement-enamel junction (CEJ) and alveolar bone crest (ABC), and inclination of the teeth to the palatal plane were evaluated. Paired t-test, Spearman's correlation tests, and linear regression tests were used (P < 0.05). Results: the buccal distance between the CEJ and ABC was greater than the palatal one in all pairs of teeth. Most of the bone tissues had a thickness ≤ 1 mm in the buccal face, whereas in the cervical-apical direction, the thickness was ≥ 2 mm. There is no equivalence between genders in the sample. Conclusion: the reduced buccal bone architecture around the first premolars was indicative of local gingival recessions, and the lack of gender uniformity was suggestive of individual evaluation. References of normal bone tissue determining the orthodontic limits were provided to assist in the treatment planning. (AU)
Objetivo: é importante conhecer as espessuras das cristas ósseas alveolares (COAs) com base na literatura atual para o planejamento e sucesso do tratamento ortodôntico. No entanto, os estudos apresentam limitações científicas em relação às COAs, pois a resolução da imagem não é adequada e está restrita apenas a alguns dentes ou face vestibular. Este estudo teve como objetivo descrever um padrão de referência para corticais ósseas de dentes superiores, no qual 15 pacientes (idade média de 21,79 anos) com oclusão equilibrada e perfil facial harmonioso foram avaliados por meio de tomografia computadorizada de feixe cônico no tamanho de voxel de 0,1 mm. Material e Métodos: os tecidos ósseos dos terços cervical, médio e apical da raiz (vestibular e palatina), a distância entre a junção cemento-esmalte (JCE) e a crista óssea alveolar (COA) e a inclinação dos dentes ao plano palatino foram avaliados. Foram utilizados o teste t pareado, os testes de correlação de Spearman e os testes de regressão linear (P < 0,05). Resultados: a distância vestibular entre a JEC e a COA foi maior que a palatina em todos os pares de dentes. A maioria dos tecidos ósseos apresentou espessura ≤ 1 mm na face vestibular, enquanto no sentido cérvico-apical a espessura foi ≥ 2 mm. Não há equivalência entre os gêneros na amostra. Conclusão: a arquitetura óssea vestibular reduzida ao redor dos primeiros pré-molares foi indicativa de recessões gengivais locais, e a falta de uniformidade de gênero foi sugestiva de avaliação individual. Referências de tecido ósseo normal determinando os limites ortodônticos foram fornecidas para auxiliar no planejamento do tratamento. (AU)
Subject(s)
Humans , Male , Female , Adolescent , Adult , Orthodontics , Bone and Bones , Cone-Beam Computed Tomography , Alveolar Process , DiagnosisABSTRACT
Objective: To measure the labial gingival thickness and bone lamella thickness in the maxillary anterior area using digital method, and to analyze the correlation between the two, so as to provide a reference for esthetic restoration and implantation treatment of the upper anterior area. Methods: Fifty-seven patients [23 males, 34 females, (25.8±4.5) years old] who planned to receive posterior dental implant restoration were recruited randomly with the inclusion and exclusion criteria in Department of Prosthodontics, School of Stomatology, The Fourth Military Medical University from May 2020 to October 2020. The 3Shape software was used to perform oral scanning, and cone beam CT (CBCT) was taken for each patient. The image data was fitted and registered by the 3Shape software. The gingival thickness at 2 mm below the gingival margin, bone thickness and gingival thickness at 2 and, 4 mm below the crest of the labial alveolar crest in maxillary central incisors, lateral incisors and canines, were measured. Results: The gingival thickness at 2 mm below the gingival margin of maxillary central incisors, lateral incisors and canines was (1.42±0.21), (1.19±0.17) and (1.23±0.20) mm respectively (F=12.47, P<0.001). The gingival thickness at 2 mm below gingival margin and 4 mm below crest of residual ridge in the male patients were (1.31±0.21) and (0.67±0.22) mm, and those in the female patients were (1.26±0.22) and (0.58±0.19) mm respectively, and there were statistically significant differences in the gingival thickness between the "2 mm below gingival margin" group and the "4 mm below crest of residual ridge" group (t=2.01 and 3.97, P<0.05). There was a positive correlation between gingival thickness and alveolar bone thickness at 2 mm and 4 mm below the crest of residual ridge in maxillary anterior region, and the correlation coefficients (r) were 0.387 and 0.344 respectively (P<0.05). Conclusions: Gingival thickness of maxillary anterior area is related to the tooth position and gender. The gingival thickness of men is greater than that of women.The gingival thickness at 2 and 4 mm below the crest of the alveolar crest is positively correlated with the thickness of the alveolar bone.
Subject(s)
Adult , Female , Humans , Male , Young Adult , Alveolar Process/diagnostic imaging , Cone-Beam Computed Tomography , Esthetics, Dental , Gingiva/diagnostic imaging , Incisor/diagnostic imaging , Maxilla/diagnostic imagingABSTRACT
OBJECTIVES@#To explore the relationship between the height of alveolar bone resorption and sex and age in the adolescent dentition.@*METHODS@#Multi-slice computed tomography (MSCT) was used to measure the height of alveolar bone resorption at labial, lingual, mesial and distal sites of teeth in 149 adolescents aged from 10 to 20 years. SPSS 25.0 software was used to analyze the relationship between the height of alveolar bone resorption and sex and age.@*RESULTS@#There was no significant difference in the height of alveolar bone resorption between sex (P>0.05). The height of alveolar bone resorption was positively correlated with age in all types of teeth. The model constructed by combining the alveolar bone resorption height data of four sites (y=2.569x1+3.106x2+4.108x3+1.451x4-0.082, R2max=0.756)had a better ability to infer age than that of combining two sites (y=5.942x1+4.489x2+0.612, R2max=0.706) and a single site (R2max=0.638).@*CONCLUSIONS@#The height of alveolar bone resorption is positively correlated with the age of adolescents. The combination of four sites has a stronger ability to infer the relationship between the height of alveolar bone resorption and age in adolescents and has higher accuracy in practical application.
Subject(s)
Humans , Adolescent , Child , Young Adult , Adult , Alveolar Process/diagnostic imaging , Cone-Beam Computed Tomography , Bone Resorption/diagnostic imaging , Tomography, X-Ray ComputedABSTRACT
Introduction: The objective of a complete denture prosthesis is restoring aesthetics, comfort, and function by the replacement of missing dental and alveolar structures employing a stable prosthesis. Case Report: Many conditions can complicate the treatment plan and fabrication of a complete denture prosthesis. Complete denture fabrication in clinically compromised conditions is a challenging task for the dentist. In this clinical report, we present comprehensive management of a patient with denture-induced hyperplasia, flabby ridge, and severely resorbed edentulous ridge. The three part strategy for management of the above-mentioned challenges can provide high-quality complete dentures, based on recognized prosthodontic principles. This first part will discuss the management of denture induced hyperplasia by elimination of the inflammation and excision of the lesion. Part two will cover management of the flabby ridge using a modified window technique for the impression of maxillary flabby tissues for an improved and controlled application of the impression material that is usually obtainable in dental practice. Part three highlights the rehabilitation procedure of the resorbed mandibular ridge using a functional impression technique with minimum soft tissue displacement and neutral zone arrangement of teeth to improve stability of the denture. Conclusion: rehabilitation of a patient with denture induced hyperplasia, flabby ridge, and severely resorbed edentulous ridges was successful.
Introducción: El objetivo de una prótesis completa es restaurar la estética, la comodidad y la función mediante el reemplazo de las estructuras dentales y alveolares faltantes empleando una prótesis estable. Case Report: Muchas condiciones pueden complicar el plan de tratamiento y la fabricación de una prótesis completa. La fabricación completa de la dentadura en con-diciones comprometidas clínicamente es una tarea desafiante para el dentista. En este reporte de un caso clínico, presentamos el ma-nejo integral de un paciente con hiperplasia inducida por dentadura postiza, cresta flácida y cresta edéntula severamente reabsorbida. La estrategia de tres partes para el manejo de los desafíos mencionados anteriormente puede proporcionar prótesis completas de alta calidad, basadas en reconocidos principios protésicos. La primera parte discutirá el manejo de la hiperplasia inducida por dentadura postiza mediante la eliminación de la infla-mación y la extirpación de la lesión. La segunda parte cubrirá el manejo de la cresta alveolar flácida utilizando una técnica de ventana modificada para la impresión de tejidos flácidos maxilares para una aplicación mejorada y controlada del material de impresión que generalmente se obtiene en la práctica dental. La tercera parte destaca el procedimiento de rehabilitación del reborde mandibular reabsorbido utilizando una técnica de impresión funcional con un desplazamiento mínimo de los tejidos blandos y una disposición de la zona neutra de los dientes para mejorar la estabilidad de la dentadura. Conclusion: La rehabilitación de un paciente con hiperplasia inducida por dentaduras postizas, cresta flácida y reabsorbida fue exitosa.
Subject(s)
Humans , Male , Aged , Dental Implants , Alveolar Process , Hyperplasia/surgery , Mouth Rehabilitation/methods , Surgical Procedures, Operative , Denture, Complete , LasersABSTRACT
Introdução:Técnicas para extração dentária vêm sendo aperfeiçoadas objetivando um procedimento que diminua o esforço profissional, o tempo cirúrgicoeamenize as dores e os processos inflamatórios. Neste sentido os extratores minimamente traumáticos,com a exodontia vertical, propõem-se a preservar o osso alveolar e proporcionar uma recuperação mais rápida e confortável para o paciente. Objetivo:Avaliar a efetividade do kit para extração minimamente traumática da Maximus® (Contagem, Minas Gerais, Brasil) na exodontia de raízes residuais de incisivos, caninos e pré-molares unirradiculares. Metodologia:Trata-se de um ensaio clínico, prospectivo e analítico. Os pacientes foram operados utilizando o dispositivo, sendo avaliados os dados demográficos, tempo cirúrgico, dor e conforto após a cirurgia, bem como o grau de satisfação profissional com o uso do dispositivo. Para verificar diferenças significativas foi utilizado o teste de Mann-Whitney e a busca de associações foi realizada com o Exato de Fisher. Para todos os testes foi estabelecida uma significância com p<0,05.Resultados:Quarenta elementos foram removidos, o tempo cirúrgico foi em média 16,28 minutos, níveis de dor e conforto imediatamente após a cirurgia se mantiveram baixos (p<0,0001), e o grau de satisfação profissional se manteve alto (p<0,0001). A taxa de sucesso do dispositivo foi de 93,3% para os elementosincisivos e 20% para os elementos caninos e pré-molares (p<0,0001).Conclusões:A eficácia do extrator é determinada pelo tamanho da superfície radicular cobertas com fibras periodontais e a localização do dente. No entanto pode ser bem indicada no planejamento de reabilitações implantosuportadas em região anterior de maxila e mandíbula (AU).
Introduction:Techniques for tooth extraction have been improvedaiming at a procedure that reduces professional effort, surgical time, pain and inflammatory processes. In this sense, minimally traumatic extractors with vertical extraction, propose to preserve the alveolar bone and provide a faster and more comfortablerecovery for the patient. Objective:To evaluate the effectiveness of the Maximus® Minimally Traumatic Extraction Kit (Contagem, Minas Gerais, Brasil) in the extraction of uniradicular residual roots from incisors, canines and premolars.Methodology:Thisis a clinical, prospective and analytical trial. Patients were operated on using the device, and demographic data, surgical time, pain and comfort after surgery were evaluated, as well as the degree of professional satisfaction with the use of the device.To verify significant differences, the Mann-Whitney test was used and the search for associations was performed with Fisher's exact test. For all tests, significance was set at p<0.05.Results:Forty elements were removed, surgical time averaged 16.28 minutes, levels of pain and comfort immediately after surgery remained low (p<0.0001), and the degree of job satisfaction remained high (p<0.0001). The success rate of the device was 93.3% for the incisor elements and 20% for the canine and premolar elements (p<0.0001).Conclusions:The effectiveness of the extractor is determined by the size of the root surface covered with periodontal fibers and the location of the tooth. However, can be well indicated in planning implanted rehabilitation in the anterior region of the maxilla and mandible (AU).
Introducción: Se han mejorado las técnicas de extracciónde dientescon el objetivo de un procedimiento que reduzca el esfuerzo profesional, el tiempo quirúrgico, el dolor y los procesos inflamatorios. En este sentido, los extractores mínimamente traumáticos con extracción vertical tienen como objetivo preservar el hueso alveolar y proporcionar una recuperación más rápida y cómoda para el paciente. Objetivo: Evaluar la efectividad del Kit de Extracción Mínimamente Traumática Maximus® (Contagem, Minas Gerais, Brasil) en la extracción de raíces residuales de incisivos, caninos y premolares uniradiculares. Metodología: Es un ensayo clínico, prospectivo y analítico. Los pacientes fueron intervenidos con el dispositivo y se evaluaron datos demográficos, tiempo quirúrgico, dolor y comodidad después de la cirugía, así como el grado de satisfacción laboral con el uso del dispositivo. Para verificar diferencias significativas se utilizó la prueba de Mann-Whitney y la búsqueda de asociaciones se realizó mediante la prueba exacta de Fisher. Para todas las pruebas, la significancia se estableció en p <0,05. Resultados:Se retiraron cuarenta ítems, el tiempo quirúrgico promedió 16,28 minutos, los niveles de dolor y comodidad inmediatamente después de la cirugía permanecieron bajos (p<0,0001) y el grado de satisfacción laboral se mantuvo alto (p<0,0001). La tasa de éxito del dispositivo fue del 93,3% para los elementos incisivos y del 20% para los elementos caninos y premolares (p<0,0001).Conclusiones: La efectividad del extractor está determinada por el tamaño de la superficie radicular cubierta por fibras periodontales y la ubicación del diente. Sin embargo, puede resultar muy adecuado para planificar la rehabilitación con implantes en la región anterior del maxilar y la mandíbula (AU).
Subject(s)
Humans , Surgery, Oral , Tissue Preservation , Tooth Extraction/instrumentation , Minimally Invasive Surgical Procedures/instrumentation , Alveolar Process/surgery , Bicuspid , Effectiveness , Brazil , Efficacy , Prospective Studies , Statistics, Nonparametric , Cuspid , IncisorABSTRACT
The alveolysis is a pathological condition classified as partial or total dehiscence (the root exposure is partial or total and involves the marginal bone) and apical fenestration (the root exposure doesn't involve the marginal bone). Usually occurs by vestibular and in the anterior region of the maxilla. It's commonly associated with chronic infections provoked by dental caries and dental trauma. This study aims to report a clinical alveolysis case in a previous traumatized deciduous tooth of a 4 years old child. Clinical examination noticed aveolysis apical fenestration type associated to partial dehiscence (tooth 51) and presence of mobility. In the radiographic examination it was found thickening of the pericementary space and external root resorption. The indicated treatment was extraction of the affected tooth and the use of maintainer of space. Based on the reported case, it is concluded that early care and the control of traumatized and decayed teeth are essential for the prevention of alveolysis.
A alveólise é uma condição patológica classificada em deiscência parcial ou total (a exposição radicular é parcial ou total, e envolvendo o osso marginal) e fenestração apical (a exposição radicular não envolve o osso marginal). Geralmente ocorre por vestibular e na região anterior da maxila. Está comumente associada a infecções crônicas decorrentes de cárie e traumatismo dentário. O objetivo deste estudo foi relatar um caso clínico de alveólise em dente decíduo anterior traumatizado de uma criança de 4 anos de idade. Ao exame clínico constatou-se alveólise do tipo fenestração apical associada à deiscência parcial (dente 51) e presença de mobilidade. Ao exame radiográfico foi observado espessamento do espaço pericementário e reabsorção radicular externa. O tratamento indicado foi a exodontia do dente afetado e o uso de mantenedor de espaço. Com base no caso relatado, conclui-se que a atenção precoce e o controle de dentes traumatizados e cariados são essenciais para a prevenção da alveólise.
Subject(s)
Humans , Male , Child, Preschool , Tooth Injuries , Alveolar Process , Tooth, DeciduousABSTRACT
SUMMARY: The posterior superior alveolar artery is responsible for the vascularisation of the mucous which covers the posterior wall of the maxillary sinus, pulp and the periodontal tissues of upper molars. The collateral rami of the infraorbital artery irrigate the mucous of the anterior and lateral walls of the maxillary sinus, as well as the pulp and periodontal tissue of the upper anterior teeth and upper premolars. Both these arteries present intraosseous and extraosseous rami which form an anastomosis in the anterior and lateral walls of the maxillary sinus, called the alveolar antral artery (AAA). The aim of this study was to analyse the presence, location and morphometry of the AAA in a Chilean population, considering sex, side and age, using Cone-Beam computed tomography (CBCT). Forty-two CBCT examinations of Chilean adults were evaluated to analyse the presence, location (extraosseous, intraosseous or subperiosteal) and diameter (<1mm, 1-2 mm, 2-3 mm, >3 mm) of the AAA and the distance from the AAA to the amelocemental limit of the upper second premolar (2PM), permanent upper first molar (1M) and permanent upper second molar (2M) by sex and age range. Pearson's chi-squared test, Student's t-test, ANOVA and Pearson's correlation coefficient were applied, using a significance threshold of 5 %. AAA was found in 75 sides (89.3 %), 38 on the right side (90.5 %) and 37 on the left (88.09 %); extraosseous location was most common. More than 80 % of the arteries presented a diameter between 1 and 2 mm, with no important differences between sexes or age ranges. In younger individuals, the artery was located closer to the vestibular amelocemental limit than in older individuals. Carrying out a proper treatment plan which includes imagenological analysis before surgical procedures is essential to avoid possible haemorrhagic events in the region.
RESUMEN: Arteria alveolar superior posterior es responsable de la vascularización de la mucosa que recubre la pared posterior del seno maxilar, la pulpa y el tejido peridontal en el que se insertan los molares superiores. Las ramas colaterales de la arteria infraorbitaria irrigan la mucosa de las paredes anterior y lateral del seno maxilar, así como la pulpa y el periodonto de los dientes anteriores superiores y los premolares superiores. Ambas arterias presentan ramas intraóseas y extraóseas que forman una anastomosis en las paredes anterior y lateral del seno maxilar, denominada arteria alvéolo antral (AAA). El objetivo de este estudio fue analizar la presencia, localización y morfometría del AAA en una población chilena, considerando sexo, lado y edad, mediante tomografía computarizada Cone-Beam (CBCT). Se evaluaron 42 exámenes CBCT de adultos chilenos para analizar la presencia, ubicación (extraósea, intraósea o subperióstica) y diámetro (<1 mm, 1-2 mm, 2-3 mm,> 3 mm) del AAA. y la distancia del AAA al límite amelocemental del segundo premolar superior (2PM), primer molar superior permanente (1M) y segundo molar superior permanente (2M) por sexo y rango de edad. Se aplicaron la prueba de chi-cuadrado de Pearson, la prueba t de Student, ANOVA y el coeficiente de correlación de Pearson, utilizando un umbral de significancia del 5 %. Se encontró AAA en 75 lados (89,3 %), 38 del lado derecho (90,5 %) y 37 del lado izquierdo (88,09 %); la localización extraósea fue la más común. Más del 80 % de las arterias presentaban un diámetro entre 1 y 2 mm, sin diferencias importantes entre sexos ni rangos de edad. En individuos más jóvenes, la arteria se ubicó más cerca del límite amelocemental vestibular que en individuos mayores. La realización de un adecuado plan de tratamiento que incluya análisis imagenológico antes de los procedimientos quirúrgicos es fundamental para evitar posibles eventos hemorrágicos en la región.
Subject(s)
Humans , Male , Female , Adolescent , Adult , Middle Aged , Young Adult , Arteries/anatomy & histology , Arteries/diagnostic imaging , Cone-Beam Computed Tomography , Alveolar Process/blood supply , Alveolar Process/diagnostic imaging , Chile , Cross-Sectional Studies , Retrospective Studies , Maxillary SinusABSTRACT
Una de las causas de la evolución de la periodontitis es la formación de defectos óseos y pérdida de inserción clínica. Una manera de eliminar el defecto intraóseo y su bolsa periodontal es eliminar las paredes de hueso que componen el defecto para colocar el complejo dentogingival en una posición más apical. La cirugía ósea es un procedimiento periodontal resectivo que involucra la modificación del tejido óseo del soporte dental, la cual es una modalidad del tratamiento periodontal quirúrgico que puede utilizarse para eliminar eficazmente los defectos óseos periodontales para estabilizar la inserción periodontal. El objetivo del presente estudio es realizar una revisión de la literatura sobre las consideraciones actuales, técnicas y principios de la cirugía ósea resectiva en el paciente periodontalmente comprometido (AU)
One of the causes of the evolution of periodontitis is the formation of bone defects and loss of clinical attachment, where one way to eliminate the intraosseous defect and its periodontal pocket is to eliminate the bone walls that make up the defect to place the dentogingival complex in a more apical position. Bone surgery is periodontal surgery that involves the modification of the supporting bone tissue of the teeth, which is a modality of surgical treatment that can be used to effectively eliminate periodontal defects and stabilize the periodontal insertion. The aim of the present study is to conduct a literature review about the considerations, techniques and principles of resective bone surgery in the periodontally compromised patient (AU)
Subject(s)
Humans , Periodontitis/surgery , Alveolar Bone Loss/surgery , Alveolar Process/surgery , Osteotomy/methods , Periodontal Pocket/surgery , Surgical Flaps , Crown Lengthening/methodsABSTRACT
SUMMARY: Bone morphogenetic protein (rhBMP-2) is a powerful osteo-inductive growth factor widely used in bone reconstruction and both the vehicle used to administer it and the scaffold substrate could determine its success in clinical situations. The aim was to analyse the clinical behaviour of dental implants placed in single alveolar ridges with a horizontal deficiency in the maxillary anterior region that were reconstructed horizontally with rhBMP-2 and porous hydroxyapatite (HA). Inclusion criteria were both males and females, between the ages of 18 and 29 with single tooth loss of one upper incisor. Cone Beam Computed Tomography (CBCT) was used to take measurements prior to bone augmentation and again prior to the implant insertion. Surgery was carried out under local anaesthetic. In the primary procedure, bone substitute was introduced using porous HA and rhBMP-2; after 4 to 5 months, dental implant surgery was carried out and the implant placed; after 3 months of consolidation the provisional prosthesis was placed and then a definitive restoration was placed. Variables were analysed using the t-test with a p-value of < 0.05 in order to assess statistical significance. Thirteen subjects were included (6 females and 7 males). Bone augmentation resulted in a bone gain of 4.15mm (p=0.023), which was shown to be statistically significant. All of the grafts placed were successful and 13 implants were placed, using torques between 30 and 70N, without complications. For the final prostheses, 11 were screw retained and 2 were cemented in place. The horizontal bone augmentation using HA and rhBMP-2 is an efficient technique for single bone defects in the anterior maxillary area; clinical trials on a larger scale are needed to confirm these results.
RESUMEN: La proteína ósea morfogenética (BMP-2) es un potente osteoinductor utilizado ampliamente en técnicas reconstructivas; el vehículo de instalación es determinante en su evolución. El objetivo fue analizar el comportamiento clínico de implantes dentales instalados en rebordes alveolares únicos con deficiencia horizontal del sector anterior reconstruida horizontalmente con BMP-2 e hidroxiapatita (HA) porosa. Fueron incluidos sujetos de ambos sexos de entre 18 y 29 años, con pérdida dentaria unitaria a nivel de incisivos superiores. Se utilizó tomografía computadorizada para realizar mediciones en las etapas previa a la instalación del injerto y previo a la instalación del implante. Las cirugías fueron realizadas bajo anestesia local. En la primera intervención se realizó la instalación del injerto óseo utilizando HA porosa y BMP-2; después de 4 a 5 meses se realizó la instalación del implante dental; 3 meses después se realizó la conexión protésica y rehabilitación final. Las variables fueron estudiadas con la prueba t test considerando el valor de p< 0,05 para considerar significancia estadística. Trece sujetos fueron incluidos (6 mujeres y 7 hombres); con la reconstrucción ósea se obtuvo una ganancia ósea de 4,15mm (p=0.023) que fue estadísticamente significativo. No existió pérdida en ningún injerto realizado; se instalaron 13 implantes con torques entre 30 y 70N sin complicaciones; se realizaron prótesis fijas atornilladas en 11 casos y cementadas en 2 casos. La técnica con HA y BMP- 2 es eficiente para reconstruir defectos horizontales en perdidas unitarias del sector anterior maxilar; ensayos clínicos de mayor escala son necesarios para confirmar estos resultados.
Subject(s)
Humans , Male , Female , Adolescent , Adult , Young Adult , Bone Morphogenetic Protein 2/therapeutic use , Alveolar Ridge Augmentation/methods , Hydroxyapatites/therapeutic use , Maxilla/surgery , Bone Regeneration , Tomography, X-Ray Computed , Dental Implants , Longitudinal Studies , Bone Transplantation/methods , Bone Substitutes , Alveolar Process/diagnostic imaging , Maxilla/diagnostic imagingABSTRACT
Abstract This study aims to evaluate the post-extraction alveolar bone reconstruction amongst 12 patients exhibiting loss of buccal bone plate in a tooth of the anterior region of the maxilla using the prosthetically-driven alveolar reconstruction technique (PDAR). In PDAR, a partial fixed provisional prosthesis (PFPP [conventional or adhesive]) with a specially designed pontic maintains the clot in a mechanically stable position during alveolar regeneration. Moreover, the pontic design, in hourglass shape and located in the subgingival area, also prevents gingival margins from collapsing. Gingival recession was evaluated through the 6-month healing period. Cone beam computed tomography (CBCT) was performed 1 month before and 8 months after PDAR treatment. For the primary outcome, in the panoramic imaging, the central area of bone defect in each tooth was selected for linear measurements. Measurements of the vertical buccal bone gain and the gain in thickness in the alveolar bone crest were obtained 8 months after PDAR. Descriptive statistics and intraclass correlation coefficient analysis were conducted. After treatment, all patients showed bone formation (a mean vertical gain of 7.1±3.7 mm, associated with a horizontal mean gain of 4.5±1.4 mm in the alveolar bone crest). The intraclass correlation coefficient for the measurements performed using CBCT was 0.999. No gingival recession, greater than 1 mm, was observed. Lower-morbidity procedures without the use of biomaterials may be a useful in post-extraction alveolar ridge regeneration and/or preservation. PDAR promoted alveolar bone formation without flaps, grafts and membranes.
Resumo Este estudo teve como objetivo avaliar a reconstrução do osso alveolar após extração em 12 pacientes com perda da tábua óssea vestibular em dentes na região anterior da maxila usando a técnica da reconstrução alveolar proteticamente guiada (RAPG). Na RAPG, uma prótese parcial fixa provisória (PPFP [convencional ou adesiva]) com um pôntico com design específico mantém o coágulo numa posição mecanicamente estável. Além disso, o design do pôntico, com formato de ampulheta e localizado na área subgengival, também previne o colapso das margens gengivais. A recessão gengival foi avaliada durante o período de cicatrização de 6 meses. Tomografias computadorizadas cone beam (TCCB) foram feitas 1 mês antes e 8 meses após o tratamento com a RAPG. Para o desfecho primário, nas imagens panorâmicas, a área central do defeito ósseo em cada dente foi selecionada para as medições lineares. As medições do ganho vertical ósseo vestibular e do ganho em espessura na crista óssea alveolar foram realizadas. A análise estística descritiva e a análise do coeficiente de correlação intraclasse forma realizados. Após o tratamento, todos os pacientes apresentaram formação óssea (ganho vertical médio de 7,1±3,7 mm, associado a ganho horizontal médio de 4,5±1,4 mm na crista óssea alveolar). O coeficiente de correlação intraclasse foi de 0,999. Nenhuma retração gengival acima de 1 mm foi observada. Procedimentos com baixa morbidade sem o uso de biomateriais podem ser úteis na regeneração/preservação do rebordo após as extrações. A RAPG promove a formação do osso alveolar sem o uso de retalhos, enxertos e membranas.
Subject(s)
Humans , Alveolar Bone Loss/diagnostic imaging , Tooth Socket , Tooth Extraction , Retrospective Studies , Cone-Beam Computed Tomography , Alveolar Process/surgery , Alveolar Process/diagnostic imaging , MaxillaABSTRACT
ABSTRACT Cone Beam Computed Tomography (CBCT) has modified the perspective of dentistry images, providing manipulable threedimensional images with a 1:1 patient:image ratio. Treatments and diagnosis are modified or corroborated by CBCT; however, its accuracy in thin structures such as cortical bone has been subjected to critical review. The aim of this study is to correlate the measurement of vestibular alveolar bone height using direct measurements and measurements performed with conebeam tomographic images with standard (SD) voxel resolution. Thirty incisor and premolar teeth of patients undergoing open curettage were measured with a highprecision caliper and with Cone Beam Computed Tomography (CBCT) at an SD resolution of 0.16 mm voxels in a 3D Orthophos XG Sirona scanner. Intraobserver evaluation was performed using the intraclass correlation coefficient (ICC). Direct measurements and CBCT measurements were correlated using Pearson correlation (PCC). The mean difference between indirect and direct measurements was 3.15 mm. Paired t test and Pearson Correlation coefficient determined that all measurements differed statistically from each other with p<0.05. With the CT scanner and protocol used in this study, CBCT images do not enable accurate evaluation of vestibular alveolar bone height.
RESUMEN La tomografía de haz cónico (CBCT) ha modificado la perspectiva de la imagenología en odontología que brinda una imagen tridimensional manipulable con una relación 1:1, paciente: imagen. Los tratamientos y diagnósticos se ven modificados o corroborados por el CBCT; sin embargo, la exactitud que presenta en estructuras delgadas como las corticales óseas ha sido sometida a críticas. El objetivo fue correlacionar la medición de la altura del hueso alveolar vestibular mediante mediciones directas y las realizadas con imágenes tomográficas de haz cónico con resolución de vóxel estándar (SD). Treinta dientes incisivos y premolares de pacientes sometidos a un curetaje abierto se midieron con un calibrador de alta precisión y una tomografía computarizada de haz cónico (CBCT) a una resolución SD de 0,16 mm de vóxeles en un escáner 3D Orthophos XG Sirona. La evaluación intraobservador se realizó utilizando el coeficiente de correlación intraclase (ICC), y las mediciones directas y las mediciones CBCT se correlacionaron utilizando la correlación de Pearson (PCC). La diferencia media entre las mediciones indirectas y directas fue de 3,15 mm. La prueba t pareada y el Coeficiente de Correlación de Pearson determinaron que todas las mediciones fueron estadísticamente diferentes entre sí con una p <0.05. Con el escáner de TC y el protocolo utilizado en este estudio, las imágenes CBCT no permiten una evaluación precisa de la altura del hueso alveolar vestibular.